Citrix X1BTLE Service Manual

VCCI Class B Statement:
情報処理装置等電波障害自主規制について
この装置は、情報処理装置等電波障害自主規制協議会(VCCI)の基準に基づく、 クラスB情報技術装置です。この装置は家庭環境で使用されることを目的とし ていますが、この装置がラジオやテレビジョン受信機に近接して使用される と、受信障害を引き起こすことがあります。
取扱説明書にしたがって正しい取り扱いをしてください。
MoC: 51-48519 אסור להחליף את האנטנה המקורית או לעשות כל שינוי טכני אחר במוצר.
Disposal Information The symbol above means that according to local laws and regulations your product should be disposed of separately from household waste. When this product reaches its end of life, take it to a collection point designated by local authorities. Some collection points accept products for free.The separate collection and recycling of your product at the time of disposal will help conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment.
Disclaimer of Warranty and Risk of Use. It is understood by You that the Product MAY
CONTAIN DEFECTS and that CITRIX MAKES NO EXPRESS OR IMPLIED REPRESENTATIONS OR WARRANTIES WHATSOEVER REGARDING ITS USE, PERFORMANCE, OPERATION OR SUPPORT. By way of example, but not of limitation, CITRIX MAKES NO REPRESENTATIONS OR WARRANTIES OF NONINFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. USER ACKNOWLEDGES THAT THE PRODUCT IS DELIVERED ON AN “AS IS” BASIS AND THAT USER’S USE OF THE PRODUCT SHALL BE AT USER’S SOLE RISK. USER SHALL HAVE THE SOLE RESPONSIBILITY FOR ADEQUATE PROTECTION AND BACK­UP OF ANY DATA USED IN CONNECTION WITH THE TESTING OF THE PRODUCT.
Limitation of Liability. YOU AGREE THAT IN NO EVENT SHALL CITRIX BE LIABLE FOR (i) SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES SUCH AS, BUT NOT LIMITED TO, EQUIPMENT DOWN-TIME, LOSS OF DATA, LOST PROFITS, OR EXEMPLARY OR PUNITIVE DAMAGES, WHETHER OR NOT FORESEEABLE AND EVEN IF CITRIX OR ITS REPRESENTATIVE HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, OR (ii) ANY OTHER CLAIM, DEMAND OR DAMAGES WHATSOEVER RESULTING FROM OR ARISING OUT OF OR IN CONNECTION WITH THIS AGREEMENT OR ITS TERMINATION OR THE DELIVERY, USE OR PERFORMANCE OF THE PRODUCT, WHETHER IN AN ACTION IN CONTRACT OR TORT, INCLUDING NEGLIGENCE, OR OTHERWISE. CITRIX SHALL IN NO EVENT BE LIABLE FOR DAMAGES WHICH EXCEED $100.00.
30500298200 | V5
X1 Mouse
Model X1BTLE
Instructions
1. Install the latest version of Citrix Receiver.
2. Enable Bluetooth from iPhone or iPad. Enable the X1 Mouse by On switch on bottom.
3. Start Receiver and Enable X1 Mouse from Settings options from top right Receiver menu.
4. Press Connect button on mouse bottom.
5. iOS pop-up will prompt to pair the mouse, press OK.
6. Once paired you can see mouse cursor, please note that mouse click will work only inside the HDX session.
7. In case of any issues (i.e. if not seeing mouse cursor)
a. Kill the Receiver app by swiping up. b. Go to Setting->Bluetooth (locate Citrix X1 Mouse),
press i, then Forget This Device.
c. Follow the pairing process again as in #2-4.
Notes:
• The Receiver with an iPhone can also support external
monitors via VGA/HDMI cable.
• The Citrix X1 Mouse will also operate as a standard Blue-
tooth 4.0 Mouse with a PC or Android. (Re-pairing is required)
• The Citrix X1 Mouse will only work with Receiver or other
supported Citrix apps, not standard iOS apps.
• Citrix X1 Mouse works with iPad 3 or later and iPhone 4s
or later.
• Do not pair the Mouse to iPad/iPhone via iOS settings.
• For more information see Citrix.com/Mouse
FDA: The Citrix X1 Mouse is a Class 1 laser product in accordance with IEC 60825-1 A1 A2 and 21 CFR 1040.10 and 1040.11 except for deviations pursuant
to Laser Notice No. 50, dated June 24, 2007. Caution: Modication of this
device may result in hazardous radiation exposure. For your safety, have this equipment serviced only by an Authorized Service Provider. A Class 1 laser is safe under reasonably foreseeable conditions per the requirements in IEC 60825-1 AND 21 CFR 1040. However, it is recommended that you do not direct the laser beam at anyone’s eyes.
FCC ID: 2AEDSX1BTLE. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Radio and Television Interference This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Important: Any changes or modications not expressly approved by Citrix
Systems Inc. could void the user’s authority to operate this equipment. Responsible party information Citrix Systems Inc. 4988 Great America Pkwy, Santa Clara, CA, 95054
This product complies with the requirements set out in the Council (European Parliament) Directive on the Approximation of the Laws of the Member States relating to Electromagnetic Compatibility of Radio and Telecom device (1999/5/EC) and restriction of the use of certain hazardous substances in electrical and electronic equipment 2011/65/EU.
IC: 20012-X1BTLE. This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: 1.This device may not cause harmful interference; 2.This device must accept any interference received, including interference that may cause undesired operation of the device.
Cet appareil est conforme à Industrie Canada une licence standard RSS exonérés (s). Son fonctionnement est soumis auxdeux conditions suivantes: 1. Cet appareil ne doit pas provoquer d’interférences; 2. Cet appareil doit accepter toute interférence reçue, y compris les interférences pouvant provoquer un fonctionnementindésirable de l’appareil.
Radiation Exposure Statement: The product complies with the US/Canada portable RF exposure limit set forth for an uncontrolled environment and is safe for intended operation as described in this manual. Further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is available.
Déclaration d’exposition aux radiations: Le produit est conforme aux limites d’exposition pour les appareils portables RF pour les Etats-Unis et le Canada établies pour un environnement non contrôlé.
Le produit est sûr pour un fonctionnement tel que décrit dans ce manuel. La réduction aux expositions RF peut être augmentée si l’appareil peut être conservé aussi loin que possible du corps de l’utilisateur ou que le dispositif est réglé sur la puissance de sortie la plus faible si une telle fonction est disponible.
IFT: RCPCIX115-0584. “La operación de este equipo está sujeta a las siguientes dos condiciones:1.es posible que este equipo o dispositivo no cause interferencia perjudicial y; 2. este equipo o dispositivo debe aceptar cualquier. interferencia, incluyendo la que pueda causar su operación no deseada”
Loading...