F1
1
1
User Guide
Thank you for choosing the F1 touch screen double
card GSM/GPRS digital mobile phone. After reading this
guide you will be able to fully master the use of your F1
mobile phone and appreciate all its functions and ease of
use.
The F1 touch screen mobile phone is designed for
use on the GSM/GPRS networks. Not only does the F1
provide you with basic calling functions, but also with
many practical functions such as handwrite input text，
double cards, a name card style phonebook, personalized
64 chord ring tones and pictures, clock, alarm, camera,
phonic kinescope, MP3/MP4 player, Memory (T-Flash)
card, sound recorder, calculator, automatic power
on/power off, to do list,GPRS surfing, guard and track
against theft, MMS etc, to improve the time you spend
working and playing. Moreover, the F1 uses a
personalized man-machine interface and the perfect
functional design will satisfy all your needs. The F1 TV
mobile phone is compatible with GSM/GPRS technology
and has been approved by certification authorities both
domestically and abroad.
F1
2
Technical information
Phone
Model F1
Dimensions (w×h×t) 43.4×104.3×13.5mm
Weight
Lithium Battery
Model F1
Nominal voltage 3.7V
Nominal 4.2V+/-0.05V
Capacity rating 800mAh
Travel charger
Model F1
Input AC 220V~50Hz, 100mA
Output 5.0V, 500mA
USB data charge wire
spec USB 1.1 Slave
Earphone
spec stereo earphone
F1
3
Appearance
1. USB
2. Receiver
3. Screen
4. Keypad
5. Torch Light
6. TV ant
7. Camera
Keypad Instructions
1. Left soft key： to perform the function of the
prompt displayed in lower left corner of the
F1
4
screen.
2. Dial key: to dial and pick up calls; on standby, to
see the calls record list.
3. Right soft key： to perform the function of the
prompt displayed in lower right corner of the
screen.
4. Torch Light key: the key is to use light.
5. Left/right keys： for moving the cursor when
editing text; on standby, press the left key to enter
the “Write Messages” menu, press the right key to
enter into the “Tone Setup” menu. At the camera
preview mode, press the left/right keys to
circularly switch with EV; in the [File Manager]
\[Memory Card] submenu, press the left key to
return the upper menu, press the right key to
open the file.
6. Up/down keys： scroll to view names, phone
numbers, SMS, MMS etc, moves the cursor up
and down when editing text; on standby, press
the up key to enter the “Video Recorder” menu,
press the down key to enter into the “Alarm”
menu. At the camera preview mode, press the
up/down keys to adjust Zoom.
7. Camera key:.taking pictures
F1
5
8. Number key: to import numbers;When playing
music,use 1 to decrease volume,use 3 to
increase volume.
9. OK key: to enter the menu or execute the
function which hightlighted.
10. Hang-up key: to end a call or reject incoming
calls; under most circumstances pressing this key
will put the mobile phone into standby mode.
11. TV keys: to play TV.
Battery
The battery is initially charged with 50％ of its total
capacity, you can unpack and use it. Please recharge
the battery to full after it's exhausted for the first 3 times,
so as to make the best of your battery.
Removal and Installation of the Battery
When removing the battery follow the following
steps:
Push the battery cover towards bottom;
Raise the battery bottom, break out the battery
from the mobile-phone.
Warning: You must turn off your mobile phone before
removing the battery. Under no circumstances
F1
6
should you remove the battery when the
mobile phone is on as this may damage the
SIM card and your mobile phone.
When installing the battery follow the following steps:
According to arrowhead direction, push the battery
to inset mobile-phone.
Cover with the battery cover.
③Push the battery cover towards top.
The charger connector with the bottom of the phone
(with the arrow pointing upward).
The charger connector with the electrical source.
The battery capacity indicator in Icon Area will then
flash periodically; when charging at power-off status,
charging indicator on the screen means the phone is
charging now. If you are using a phone in low battery,
it may need certain time for charging indicator to
appear on the screen after starting to charge.
F1
7
When the Capacity Indicator in Icon Area is full and
doesn't flash any more, the charging process is
complete. If your phone is charged in power off
status, charging complete screen will also display.
Charging process usually takes 1-2.5 hours. Battery,
phone and charger normally turns hot during
charging process.
When charging process complete, disconnect
connections between AC power outlet, your phone
and the charger.
Attention:
Be sure to charge in ventilated place with the
temperature ranging from -10℃ to ＋ 45℃, and
always use the charger provided by original
manufacturer. Using unauthorized charger may
cause danger, and also violates warranty coverage
of the manufacturer.
Charge your battery in time when the phone
automatically powers off or displays low battery
warning. The phone will automatically decrease
charging time when the battery is not exhausted
before charging.
F1
8
Insertion of the SIM Card
Metal interface of SIM card is very easy
scrape.Before inserting into the phone you must carefully
remove it.
Turn off the phone; remove the battery and unplug
other external power sources.
Insert the SIM card into the SIM slot as shown in the
following picture.
When you need to remove the SIM card, please first
turn off the phone, remove the battery, then remove
the SIM card.
Insertion of the Memory Card
Turn off the phone; remove the battery and unplug
other external power sources.
TF CARD
F1
9
Put the Memory Card into the Memory Card trough.
When you need to remove the Memory Card, please
first turn off the phone, remove the battery, then
remove the Memory Card.
Loading...