Page 1
T7100 and M7100 CITELlink Phone Quick Reference
What’s Different
•Press SUPERKEY to acces s a menu that allo ws you to prog ram speed calls and personal key s, and to turn
features on and off. Press the ∗ and # dial pad keys to navigate through the SUPERKEY menu.
•A Hold key is not available; however, you can place a call on temporary hold (see below).
Using Your Phone
Temporary Hold Press Trans/Conf to place a call on temporary hold
T o return to the call, ha ng up or press Cancel and the held call will
automatically recall your set.
A call that you have placed on temporary hold will automatically
recall your phone after 1 minute.
Transfer 1.While on a call, press Trans/Conf.
2.Dial the number of a third party.
3.Do one of the following:
• Hang up
• Wait for an answer, announce the transfer, and hang up
Conference 1.While on a call, press Trans/Conf
2.Dial number of next party
3.Wait for answer
4.Press TransConf
Redial last number To save, lift the handset and enter the Save Last Number code
To dial, lift the handset enter the Redial Last Number code
Set up call forwarding
(once set, see below to enable or disable)
1.Press SUPERKEY.
2.Press # (No) until "Call Forwarding?" appears.
3.Press * (Yes).
4.Press # (Next) until the desired type of Call Forward appears.
5.Press * (Review).
6.Press * (Program).
7.Dial the destination numbe r.
8.Press DOWN ARROW to save.
9.Press SUPERKEY.
Enable or disable call forwarding 1.Press SUPERKEY.
2.Press # (No) until "Call Forwarding?" appears.
3.Press * (Yes).
4.Press # (Next) until the desired type of Call Forward appears.
5.Press * (Review).
6.Press * (Change).
7.Press # (TurnOn) or (TurnOff).
8.Press SUPERKEY.
Program a speed call 1.Lift the handset.
2.Dial 67.
3.Enter an index number between 00 and 09.
4.Dial the number to be stored.
5.Hang up.
Speed call a saved number 1.Lift the handset.
2.Dial 58.
3.Enter an index number between 00 and 09.
Page 2
M7208, M7208N, M7310, M7310N, M7324, T7208, T7316, and T7406 CITELlink Phone Quick Reference
What’s Different
•Press SUPERKEY to access a menu that allow s you to pr ogram spe edcal ls, pers onal key s, and to tu rn on
and turn off fe atures. Press the Yes and No softkeys to navigate through the SUPERKEY me nu. For phones
without softkeys, use ∗ (Yes) and # (No) on the dial pad.
• During a handsfree call if the Microphone indicator is on, the Microphone is on. If the indicator is off, the
Microphone is muted. Press the Microphone key to turn the microphone on and off.
Using Your Phone
Hold Press Hold to place call on hold
To retrieve the call, press the flashing line key
Transfer 1.While on a call, press Trans/Conf.
2.Dial the number of a third party.
3.Do one of the following:
• Hang up
• Wait for an answer, announce the transfer, and
hang up
Conference 1.While on a call, press Trans/Conf
2.Dial number of next party
3.Wait for answer
4.Press TransConf
Redial last number that you dialed 1.Lift the handset.
2.Press Redial.
Set call forwarding 1.Press SUPERKEY
2.Press No until "Call Forwarding?" appears
3.Press Yes
4.Press Next until desired Call Forwarding type
appears
5.Press Review
6.If a number is already programmed, press Change
7.Press Program
8.Dial the destination number
9.Press Save
10.Press SUPERKEY
Enable or disable call forwarding 1.Press SUPERKEY
2.Press No until "Call Forwarding?" appears
3.Press Yes
4.Press Next until the desired type of forwarding
appears
5.Press Review
6.Press Change
7.Press TurnOn or TurnOff
8.Press SUPERKEY
Program a personal speed call 1.Press SUPERKEY
2.Press No until "Personal Keys?" appears
3.Press Yes
4.Press a personal key that isn’t a line key
5.Press Change
6.Press Yes
7.Dial number (press HOLD for a pause; TRANS/
CONF for a flash)
8.Dial the destination number
9.Press Save
10.Press SUPERKEY
Speed call a saved number Press the speed call key.
Loading...