Cissell WE 132 Installation Manual
Instruction manual
Part No. D0293
WE 73, WE 95
WE 132, WE 165
With electronical timer µ20
Technical specifi cations
Installation instructions
Operating instructions
Maintenance
IPSO - LSG n.v
Nieuwstraat 146 - B-8560 Wevelgem (België)
Tel. 056/41 20 54 - Fax 056/41 86 74
Contents
1 General safety instructions ............................................................ 3
2 Technical data and dimensions ..................................................... 4
Technical data ................................................................................. 4
Dimensions ...................................................................................... 6
3 Installation and connection ............................................................ 8
Ground ............................................................................................ 8
Anchoring ........................................................................................ 8
Water connection ............................................................................ 8
Water drain ...................................................................................... 9
Main power connection ................................................................... 9
Liquid soap connection .................................................................... 10
Connection of a central operating panel for coinmachines ............ 11
Steam connection ............................................................................ 12
4 Operating instructions ................................................................... 13
Machine with start button ............................................................... 13
Machine with coin or token operation .............................................. 21
5 Standard programs ........................................................................ 27
6 Technical remarks .......................................................................... 28
Internal connection of the electrical heating .................................... 28
Internal connections of the motors .................................................. 29
Thermo-magnetic motor protection ................................................. 30
Error messages ............................................................................... 30
7 Maintenance of the machine .......................................................... 32
Code: 249/00162/00
14/10/2005
Content
General safety instructions
Ignoring any of the safety instructions can cause serious
personal injury and can also cause damage to the linen or
the machine
Read the installation and instruction manual carefully before connecting
It is recommended that the machine be installed by qualifi ed technici-
The machine should be installed according to the installation instructions.
The machine should be grounded according to the instructions in order
Do not expose the machine to high humidity or extreme high or low
Cut off all main water inlets, steam and electrical supplies at the end of
1
the machine.
ans.
(See chapter 4)
to eliminate the risk of electrocution.
temperatures.
each operating day.
Before starting repairs or maintenance, shut off all power and water sup-
plies.
To prevent fi re and explosion:
Keep the area around the machine free from infl ammable or combustible
products.
Do not put fabrics that are treated with infl ammable products into the
machine. These fabrics should be hand-washed or air-dried fi rst.
Always carefully read and follow the instructions on the packing of de-
tergents. Store these products out of the reach of children.
Always take into account the instructions on the labels of clothes.
Never allow children to play in the surroundings of a machine.
Remark:
These instructions surely cannot prevent all risks of accidents. It is up to the user to act with
the utmost precaution.
Do not hesitate to contact the dealer in case of a problem.
3
Technical data and dimensions
Technical data
WE 73 WE 95
Capacity (dry weight)
1/11 6,6 kg 8,6 kg
1/10 7,3 kg 9,5 kg
1/9 8,1 kg 10,5 kg
Cylinder
Diameter 530 mm 530 mm
Depth 345 mm 440 mm
Volume 73 Lit. 95 Lit.
Cabinet
Height 1005 mm 1110 mm
Width 660 mm 660 mm
Depth 670 mm 770 mm
Front loading
Diameter door opening 300 mm 300 mm
Door height 360 mm 455 mm
To center 510 mm 605 mm
Speed
Wash 50 rpm 50 rpm
Spin 500 rpm 500 rpm
G-force
Spin 74
Motor(3 phase)
Wash 18p. 290rpm 120 W 120 W
Spin 2p. 2900 rpm 370 W 550 W
Drain valve
Depend-O-Drain 6/4"
Water supply
Hard, soft, warm water and cool-down 3/4"
Steam connection
Steam connection 3/8"
Heating
Electrical 220/380 V 4,2/6/9 kw
Electrical 380 V 12 kw
Steam X
Warm water (without additional heating) X
Warm water (with additional heating) X
Packing dimensions
(H x W x D) 1140x732x832mm (WE73)
1230x732x950mm (WE95)
Weight
Net 170 kg 178 kg
Gross 225 kg 230 kg
2
4
2
WE 132 WE 165
Capacity (dry weight)
1/11 12 kg 15 kg
1/10 13,2 kg 16,5 kg
1/9 14,5 kg 18,3 kg
Cylinder
Diameter 650 mm 650 mm
Depth 400 mm 500 mm
Volume 132 Lit. 165 Lit.
Cabinet
Height 1170 mm 1170 mm
Width 780 mm 780 mm
Depth 760 mm 860 mm
Front loading
Diameter door opening 300 mm 300 mm
Door height 465 mm 465 mm
To center 615 mm 615 mm
Speed
Wash 50 rpm 50 rpm
Spin 500 rpm 500 rpm
G-force
Spin 88
Motor(3 phase)
Wash 18p. 290rpm 220 W 280 W
Spin 2p. 2900 rpm 1100 W 1300 W
Drain valve
Depend-O-Drain 6/4"
Water supply
Hard, soft, warm water and cool-down 3/4"
Steam connection
Steam connection 3/8"
Heating
Electrical 220/380 V 12/15/18 kw
Electrical 380 V 21/24 kw
Steam X
Warm water (without additional heating) X
Warm water (with additional heating) X
Packing dimensions
(H x W x D) 1310x850x922mm (WE132)
1310x850x1022mm (WE165)
Weight
Net 235 kg 245 kg
Gross 290 kg 315 kg
5
Dimensions
WE 73/95
WE73 = 1035 - WE95 = 1130
WE73 = 1008 - WE95 = 1103
2
22061
WE73 = 350 - WE95 = 470
55 55550
150
WE73 = 892 - WE95 = 987
WE73 = 810.5 - WE95 = 905.5
WE73 = 280 - WE95 = 375
24
660
390
310
230
140.5
A
C
B
E
D
F
G
H
I
WE73 = 86 - WE95 = 186
560
WE73 = 670 - WE95 = 770
WE73 = 728 - WE95 = 828
A. Ventilation soap dispenser
B. Liquid soap connetions
C. Hard water connections 3/4"
D. Warm water connections 3/4"
E. Soft water connections 3/4"
F. Connections clamps
G.Electrical connections
L
WE73 = 856.5 - WE95 = 951.5
H.Emergency button
I. Ventilation tub
K. Drain valve
K
56
200
175
L. Steam connections
6
Dimensions
WE 132 / 165
2
1198.5
1171
455
640
780
65.5
7070
25
WE132 = 763 - WE165 = 863
WE132 = 820 - WE165 = 920
220
68WE132 = 670 - WE165 = 770
1042
931
79.5
902
157.5
C
235.5
155
A
D
B
E
F
G
H
I
A. Ventilation soap dispenser
B. Liquid soap connetions
C. Hard water connections 3/4"
D. Warm water connections 3/4"
E. Soft water connections 3/4"
F. Connections clamps
1000.5
L
G.Electrical connections
H.Emergency button
I. Ventilation tub
K. Drain valve
L. Steam connections
K
208
102
7
Installation and connection
Surface
The machine must be securely fi xed on a fl at surface (metal base, concrete or
solid ground). The anchoring is to be done on the provided places (A) in the
base. (See Dimensions 2)
The machine must be placed entirely level. For easy maintenance it is recommended to keep a minimal distance of 600 mm between the wall and the back
of the machine.
If several machines are placed next to each another, there should be a minimal
distance of 30 mm between each machine.
Anchoring
On a metal base
3
D
E
F
D
B
C
C
G
The machines must be fi xed on a metal base which is securely anchored on a
concrete base.
A: Bolt M12 (WE73/95), M16 (WE132/165)
B: Concrete base (WE73: 20cm, WE95: 30cm, WE132/165: 40cm)
C: Washer 40x17x4
D: Nut M12 (WE73/95), M16 (WE132/165)
E: Base of the machine
F: Metal base
A
Directly on the ground
The machine must be anchored directly on a concrete base.
D
E
B
A
C
A: Bolt M12 (WE73/95), M16 (WE132/165)
B: Concrete base (WE73: 20cm, WE95: 30cm, WE132/165: 40cm)
C: Washer 40x17x4
Water connection
The machine is delivered with hoses with 3/4" connections. These hoses fi t the
water inlet valves of the machine and the main water inlet taps. To ensure the
optimal functioning of the water inlet valves, the water pressure on the inlet
should be between 0,5 and 10 kg/cm² (7 and 145 psi). If the pressure is too low,
the cycle time will increase considerably.
In case of boiler fed machines, a minimum of hot water of 90°C should be
available:
For the WE73: 65 l. WE132: 120l.
For the WE95: 80 l. WE165: 140l.
8
3
Water drain
Main power connection
The machine is equipped with a drain valve with 6/4" outer diameter (50
mm). This drain valve should be connected to the drain by means of the
drain elbow which is delivered with the machine.
The diameter of the main drain should be adapted to the water fl ow
and the number of machines. It should be suffi cient to handle at
least 80L/min. per machine.
It is necessary to connect the main drain at least on one side to an
open air-brake to allow ventilation.
Remove the cover plate at the back of the machine. (See dimensions
(E)).
Connect the power cable to the connectors.
220V 3AC
220V 3 phase (3AC) should be connected to the connectors
“L1,L2,L3”.
The green/yellow grounding clamp has to be connected to the
grounding wire “PE”.
380 V 3AC + N
Power of the breaker plugs:
380 V 3 phase (3AC + N) has to be connected to the connectors
“L1,L2,L3”, the blue neutral to the “N” connector.
The green/yellow grounding clamp has to be connected to the
grounding wire “PE”.
After connection, check the spin direction. The cylinder must
spin in the direction of the arrow, showed on the sticker on the
door window (clockwise).
A wrong spin direction can damage the motor, and can also cause
water to spurt from the soap dispenser.
In case of wrong spin direction: switch the terminal clamps of the
motor circuit “R” and “S” of the connecting cable.
machine with steam heating or boiler fed machines without additional electrical heating
220V 3AC 380V 3AC + N
16 A 16 A
machine with electrical heating
Heating: 220V 3AC 380V 3AC + N
4,2 kw 16A 16A
6 kw 16A 16A
12 kW 40 A 20 A
15 kW 50 A 25 A
18 kW 50 A 32 A
21 kW ---- 40 A
24 kW ---- 40 A
9
Loading...