Cisco Zvrs I3 User Manual
Welcome!
Congratulations, you are now a new user
of our i3 device!
USER GUIDE
V R S
THEi3.com
V R S
Table of Contents:
1. What is in the Package?
2. Setting up your i3
2.1 The i3 Remote Control:
2.2 Setting Up the i3
3. Understanding Your New i3
3.1 Camera Settings
3.2 “Do Not Disturb” Mode
3.3 Stand By Mode
3.4 Your Address Book
3.4.1 Directory
3.4.2 Recents
3.4.3 Favorites
3.5 Making a Call
3.5.1 From your Contacts List
3
5
5
5
10
10
10
11
12
13
14
15
16
16
3.5.2 Entering the Phone Number Manually
3.6 Receiving a Call
4. Frequently Asked Questions
16
18
19
2
V R S
1. What is in the Package?
To make sure you have everything you need before set up; the following items should be within the
package:
1 i3 Videophone.
2 Remote.
3 Power adapter and Power Cable.
4 AA Batteries for the Remote.
.
5 Ethernet Cable.
6 HDMI Monitor Cable.
3
V R S
The i3 will require a connection to a TV or a computer monitor that has HDMI capabilities, and the
TV or computer monitor is not something that will be provided to you.
The i3 has a built-in microphone which will enable a VCO user to speak directly to the TV or
monitor equipped with speakers, however the i3 does not have any built-in speakers. If desired, the
customer can use the speakers built into the TV or external speakers.
In order to have your i3 installed securely, we will also be including a mount with the shipment of the
i3. Make sure this mount is present before you start setting up the i3. There should be no assembly
required for the mount. You will only need to adjust the knob when it comes time to set up the
mount on top of the TV.
The POP Light is an accessory and is not always included with the package, if your order came
with a POP Light, you should see this with your i3. Instructions for setting up the POP Light will be
included in the POP Light package. If your order did not come with a POP Light, you should not be
expecting this.
Once you have confirmed you have everything, you are now ready to start setting up your new i3
device!
4
V R S
2. Setting up your i3
Now that you have everything you need to set up your new i3, let’s get started!
Make sure the TV or computer monitor that you plan to use with the i3 has an available HDMI port.
2.1 The i3 Remote Control:
Your i3 comes with a remote control.
1 Zoom Out. (when not in video mode,
this will lower the sound)
2 Zoom In. (when not in video mode,
this will increase the sound)
3 Outer Circle with Arrows to move
cursor.
4 Inner Circle = OK.
5 Back Button.
6 Mute Button.
7 Green Button = Make a Call or
Access your Address Book.
8 Red Button = Hang Up.
9 Numbers.
5
V R S
2.2 Setting Up the i3
1 Carefully take the i3 out of the box.
2 Take the HDMI cable, and plug one end in the i3.
3 Next, take the Ethernet Cable, and plug one end in the i3.
6
Loading...