Cisco WS-X6066-SLB-APC, Catalyst 6500 Series, Catalyst 6500 WS-X6066-SLB-APC Installation Note

Contents

Catalyst 6500 Series Switch Content Switching Module Installation Note

Product Number: WS-X6066-SLB-APC

This publication describes how to install the Content Switching Module (CSM) in the Catalyst 6500 series switches, including the software and hardware requirements.

This publication contains these sections:

• Safety Overview, page 2

• Front Panel Description, page 7

• Environmental and System Requirements, page 9

• Installing the CSM, page 11

• Verifying the Installation, page 20

• Using the CLI, page 20

• Related Documentation, page 21

• Translated Safety Warnings, page 21

• Obtaining Documentation, page 24

• Documentation Feedback, page 25

• Obtaining Technical Assistance, page 25

• Obtaining Additional Publications and Information, page 26

Corporate Headquarters: Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA

Safety Overview

Warning

Waarschuwing

Varoitus

IMPORTANT SAFETY INSTRUCTIONS

This warning symbol means danger. You are in a situation that could cause bodily injury. Before you work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar with standard practices for preventing accidents. Use the statement number provided at the end of each warning to locate its translation in the translated safety warnings that accompanied this device.

SAVE THESE INSTRUCTIONS

BELANGRIJKE VEILIGHEIDSINSTRUCTIES

Dit waarschuwingssymbool betekent gevaar. U verkeert in een situatie die lichamelijk letsel kan veroorzaken. Voordat u aan enige apparatuur gaat werken, dient u zich bewust te zijn van de bij elektrische schakelingen betrokken risico's en dient u op de hoogte te zijn van de standaard praktijken om ongelukken te voorkomen. Gebruik het nummer van de verklaring onderaan de waarschuwing als u een vertaling van de waarschuwing die bij het apparaat wordt geleverd, wilt raadplegen.

BEWAAR DEZE INSTRUCTIES

TÄRKEITÄ TURVALLISUUSOHJEITA

Tämä varoitusmerkki merkitsee vaaraa. Tilanne voi aiheuttaa ruumiillisia vammoja. Ennen kuin käsittelet laitteistoa, huomioi sähköpiirien käsittelemiseen liittyvät riskit ja tutustu onnettomuuksien yleisiin ehkäisytapoihin. Turvallisuusvaroitusten käännökset löytyvät laitteen mukana toimitettujen käännettyjen turvallisuusvaroitusten joukosta varoitusten lopussa näkyvien lausuntonumeroiden avulla.

Statement 1071

SÄILYTÄ NÄMÄ OHJEET

Attention

Catalyst 6500 Series Switch Content Switching Module Installation Note

IMPORTANTES INFORMATIONS DE SÉCURITÉ

Ce symbole d'avertissement indique un danger. Vous vous trouvez dans une situation pouvant entraîner des blessures ou des dommages corporels. Avant de travailler sur un équipement, soyez conscient des dangers liés aux circuits électriques et familiarisez-vous avec les procédures couramment utilisées pour éviter les accidents. Pour prendre connaissance des traductions des avertissements figurant dans les consignes de sécurité traduites qui accompagnent cet appareil, référez-vous au numéro de l'instruction situé à la fin de chaque avertissement.

CONSERVEZ CES INFORMATIONS

78-15751-03

Safety Overview

Warnung

Avvertenza

Advarsel

WICHTIGE SICHERHEITSHINWEISE

Dieses Warnsymbol bedeutet Gefahr. Sie befinden sich in einer Situation, die zu Verletzungen führen kann. Machen Sie sich vor der Arbeit mit Geräten mit den Gefahren elektrischer Schaltungen und den üblichen Verfahren zur Vorbeugung vor Unfällen vertraut. Suchen Sie mit der am Ende jeder Warnung angegebenen Anweisungsnummer nach der jeweiligen Übersetzung in den übersetzten Sicherheitshinweisen, die zusammen mit diesem Gerät ausgeliefert wurden.

BEWAHREN SIE DIESE HINWEISE GUT AUF.

IMPORTANTI ISTRUZIONI SULLA SICUREZZA

Questo simbolo di avvertenza indica un pericolo. La situazione potrebbe causare infortuni alle persone. Prima di intervenire su qualsiasi apparecchiatura, occorre essere al corrente dei pericoli relativi ai circuiti elettrici e conoscere le procedure standard per la prevenzione di incidenti. Utilizzare il numero di istruzione presente alla fine di ciascuna avvertenza per individuare le traduzioni delle avvertenze riportate in questo documento.

CONSERVARE QUESTE ISTRUZIONI

VIKTIGE SIKKERHETSINSTRUKSJONER

Dette advarselssymbolet betyr fare. Du er i en situasjon som kan føre til skade på person. Før du begynner å arbeide med noe av utstyret, må du være oppmerksom på farene forbundet med elektriske kretser, og kjenne til standardprosedyrer for å forhindre ulykker. Bruk nummeret i slutten av hver advarsel for å finne oversettelsen i de oversatte sikkerhetsadvarslene som fulgte med denne enheten.

Aviso

¡Advertencia!

TA VARE PÅ DISSE INSTRUKSJONENE

INSTRUÇÕES IMPORTANTES DE SEGURANÇA

Este símbolo de aviso significa perigo. Você está em uma situação que poderá ser causadora de lesões corporais. Antes de iniciar a utilização de qualquer equipamento, tenha conhecimento dos perigos envolvidos no manuseio de circuitos elétricos e familiarize-se com as práticas habituais de prevenção de acidentes. Utilize o número da instrução fornecido ao final de cada aviso para localizar sua tradução nos avisos de segurança traduzidos que acompanham este dispositivo.

GUARDE ESTAS INSTRUÇÕES

INSTRUCCIONES IMPORTANTES DE SEGURIDAD

Este símbolo de aviso indica peligro. Existe riesgo para su integridad física. Antes de manipular cualquier equipo, considere los riesgos de la corriente eléctrica y familiarícese con los procedimientos estándar de prevención de accidentes. Al final de cada advertencia encontrará el número que le ayudará a encontrar el texto traducido en el apartado de traducciones que acompaña a este dispositivo.

GUARDE ESTAS INSTRUCCIONES

78-15751-03

Catalyst 6500 Series Switch Content Switching Module Installation Note

Safety Overview

Varning!

VIKTIGA SÄKERHETSANVISNINGAR

Denna varningssignal signalerar fara. Du befinner dig i en situation som kan leda till personskada. Innan du utför arbete på någon utrustning måste du vara medveten om farorna med elkretsar och känna till vanliga förfaranden för att förebygga olyckor. Använd det nummer som finns i slutet av varje varning för att hitta dess översättning i de översatta säkerhetsvarningar som medföljer denna anordning.

SPARA DESSA ANVISNINGAR

Catalyst 6500 Series Switch Content Switching Module Installation Note

78-15751-03

Safety Overview

Aviso

Advarsel

INSTRUÇÕES IMPORTANTES DE SEGURANÇA

Este símbolo de aviso significa perigo. Você se encontra em uma situação em que há risco de lesões corporais. Antes de trabalhar com qualquer equipamento, esteja ciente dos riscos que envolvem os circuitos elétricos e familiarize-se com as práticas padrão de prevenção de acidentes. Use o número da declaração fornecido ao final de cada aviso para localizar sua tradução nos avisos de segurança traduzidos que acompanham o dispositivo.

GUARDE ESTAS INSTRUÇÕES

VIGTIGE SIKKERHEDSANVISNINGER

Dette advarselssymbol betyder fare. Du befinder dig i en situation med risiko for legemesbeskadigelse. Før du begynder arbejde på udstyr, skal du være opmærksom på de involverede risici, der er ved elektriske kredsløb, og du skal sætte dig ind i standardprocedurer til undgåelse af ulykker. Brug erklæringsnummeret efter hver advarsel for at finde oversættelsen i de oversatte advarsler, der fulgte med denne enhed.

GEM DISSE ANVISNINGER

78-15751-03

Catalyst 6500 Series Switch Content Switching Module Installation Note

Safety Overview

Catalyst 6500 Series Switch Content Switching Module Installation Note

78-15751-03

Front Panel Description

This section describes the physical attributes of the Content Switching Module .

Figure 1 shows the CSM front panel.

Figure 1 Content Switching Module Front Panel

Status

LED

Note The RJ-45 connector is covered by a removable plate.

RJ-45 (Test) connector

CSM

105789

78-15751-03

Catalyst 6500 Series Switch Content Switching Module Installation Note

Front Panel Description

Status LED

Note For more information on the supervisor engine LEDs, refer to the Catalyst 6500 Series Switch Module

At startup, the CSM initializes various hardware components and communicates with the supervisor engine. The Status LED indicates the supervisor engine operations and the initialization results. During the normal initialization sequence, the status LED changes from off to red, orange, and green.

Installation Guide.

Table 1 describes the Status LED operation.

Table 1 Content Switching Module Status LED

Color Description

Off

• The module is waiting for the supervisor engine to provide power.

• The module is not online.

• The module is not receiving power, which could be caused by the following:

–

Power is not available to the CSM.

Red • The module is released from reset by the supervisor engine and is booting.

Orange

Green

Green to orange

1. Enter the show environment temperature mod command to display the temperature of each of four sensors on the CSM.

2. CLI=command-line interface.

RJ-45 Connector

–

Module temperature is over the limit1.

• If the boot code fails to run, the LED stays red after startup.

• The module is initializing hardware or communicating with the supervisor

engine.

• A fault occurred during the initialization sequence.

• The module has failed to download its Field Programmable Gate Arrays

(FPGAs) at startup but continues with the remainder of the initialization sequence and provides the module online status from the supervisor engine.

• The module has not received module online status from the supervisor engine.

This problem could be caused by the supervisor engine detecting a failure in an external loopback test that it issued to the CSM.

• The module is operational; the supervisor engine has provided module online

status.

• The module is disabled through the supervisor engine CLI

using the set

module disable mod command.

The RJ-45 connector, which is covered by a removable plate, is used to connect a management station device or a test device. This connector is used by field engineers to perform testing and to obtain dump information.

Catalyst 6500 Series Switch Content Switching Module Installation Note

78-15751-03

Environmental and System Requirements

This section describes the environmental and system requirements.

• Environmental Requirements, page 9

• System Requirements, page 9

• Memory Requirements, page 9

• Power Supply, page 10

• Hardware Supported, page 10

• Software Compatibility, page 10

Environmental Requirements

Table 2 lists the environmental requirements for the CSM.

Table 2 CSM Environmental Requirements

Environmental and System Requirements

Item Specification

Temperature, ambient operating 0

Temperature, ambient nonoperating –40

Humidity (RH), ambient (noncondensing) operating

Nonoperating relative humidity (noncondensing) 5% to 95%

System Requirements

Before you install the CSM in the Catalyst 6500 series switch, make sure that the switch meets the hardware and software requirements listed in this section.

Caution You can use the Multilayer Switch Feature Card (MSFC), which is internal to the Catalyst 6500 series

switch, to route traffic on either the client side or the server side of the CSM, but not both simultaneously (unless policy-based routing is used).

Memory Requirements

The CSM memory is not configurable.

CSM software release 4.1(2) requires Cisco IOS software Release 12.1(8a)EX or higher. However, the features new to CSM release 4.1(2) are available only with Cisco IOS Software Release 12.1(19) E and Catalyst operating system software release 7.6 and higher.

to 40oC (32o to 104oF)

to 70oC (–40o to 158oF)

10% to 90%

78-15751-03

Catalyst 6500 Series Switch Content Switching Module Installation Note

+ 19 hidden pages