Cisco TelePresence SX10 Quick Set Administrator's Manual

Download

Page 1

Cisco TelePresence SX10 Quick Set

Administrator guide

for Cisco TelePresence SX10 Quick Set

Software version TC7.2 AUGUST 2014

Page 2

Cisco TelePresence SX10 Quick Set Administrator Guide

Thank you for choosing Cisco!

Your Cisco product has been designed to give you many years of safe, reliable operation.

This part of the product documentation is aimed at administrators working with the setup of the SX10 Quick Set.

Our main objective with this Administrator guide is to address your goals and needs. Please let us know how well we succeeded!

May we recommend that you visit the Cisco web site regularly for updated versions of this guide.

The user documentation can be found on

► http://www.cisco.com/go/sx-docs

How to use this guide

The top menu bar and the entries in the Table of contents are all hyperlinks. You can click on them to go to the topic.

Table of contents

Introduction ............................................................................. 4

User documentation ................................................................. 5

Software ................................................................................... 5

What’s new in this version ........................................................ 6

SX10 Quick Set at a glance....................................................... 8

The screen and the remote control .......................................... 9

Web interface ........................................................................10

Accessing the web interface ...................................................11

Changing the system password ..............................................12

The interactive menu ...............................................................13

System information ..................................................................14

Placing a call ............................................................................15

Sharing content ........................................................................16

Controlling and monitoring a call .............................................17

Controlling your camera ...........................................................18

Local layout control ..................................................................19

Capturing snapshots ............................................................... 20

Controlling the far end camera ................................................21

Accessing call information ...................................................... 22

System configuration .............................................................. 23

Changing system settings ...................................................... 24

System status ......................................................................... 25

Managing the local contacts ................................................... 26

Local contacts folders............................................................. 27

Choosing a wallpaper ............................................................. 28

Choosing a ringtone ................................................................ 29

Peripherals overview .............................................................. 30

User administration ..................................................................31

Adding a sign in banner .......................................................... 35

Managing the video system’s certificates .............................. 36

Managing the list of trusted certificate authorities ................. 37

Managing pre-installed certificates for Edge provisioning ..... 39

Setting strong security mode ................................................. 40

Changing the persistency mode ..............................................41

Deleting trust lists (CUCM only) .............................................. 42

Troubleshooting ...................................................................... 43

Downloading log files .............................................................. 44

Starting extended logging ...................................................... 45

Capturing screenshots ............................................................ 46

Upgrading the system software...............................................47

Backup and restore ................................................................. 48

Reverting to the previously used soft ware version ................ 49

Factory reset ........................................................................... 50

Remote suppor t user ...............................................................51

Restarting the system ............................................................. 52

System settings .................................................................... 53

Overview of the system settings ............................................ 54

Audio settings ......................................................................... 57

Cameras set tings .................................................................... 58

Conference settings ............................................................... 60

FacilityService settings ........................................................... 64

Logging settings ..................................................................... 65

Network settings ..................................................................... 66

NetworkServices settings ....................................................... 73

Peripherals settings ................................................................ 77

Phonebook settings ................................................................ 78

Provisioning settings ............................................................... 79

RTP settings .............................................................................81

Security settings ..................................................................... 82

SerialPor t settings................................................................... 84

SIP settings ............................................................................. 85

Standby set tings ..................................................................... 89

SystemUnit settings ................................................................ 90

Time settings ...........................................................................91

UserInterface settings............................................................. 94

Video settings ......................................................................... 96

Experimental settings ........................................................... 10 3

Setting passwords .............................................................. 104

Setting the system password ............................................... 105

Page 3

Cisco TelePresence SX10 Quick Set Administrator Guide

Appendices ......................................................................... 106

Connecting the Touch 10 user interface ...............................107

Cisco VCS provisioning ........................................................ 108

Optimal definition profiles ..................................................... 109

ClearPath — Packet loss resilience ........................................110

Factory resetting the video system ....................................... 111

Technical specification ...........................................................112

Supported RFCs ....................................................................11 4

User documentation on the Cisco web site ........................... 115

Intellectual property rights .....................................................11 6

Cisco contacts ..................................................................... 116

Page 4

Cisco TelePresence SX10 Quick Set Administrator Guide

Chapter 1

Introduction

Page 5

Cisco TelePresence SX10 Quick Set Administrator Guide

This document provides you with the information required to administrate your product at an advanced level.

How to install the product and the initial configurations required are described in the Installation guide and Getting started guide, respectively.

Products covered in this guide

• Cisco TelePresence SX10 Quick Set

User documentation

The user documentation for the Cisco TelePresence systems running the TC software includes several guides suitable for various user groups.

• Installation guides: How to install the products

• Getting started guide: Initial conf igurations required to get the system up and running

• Administering TC Endpoints on CUCM: Tasks to perform to start using the product with the Cisco Unified Communications Manager (CUCM)

• Administrator guide (this guide): Information required to administer your product

• Quick reference guides: How to use the product

• User guides: How to use the product

• Video conferencing room primer: General guidelines for room design and best practice

• Video conference room acoustics guidelines: Things to do to improve the perceived audio qualit y

• Software release notes

• Regulatory compliance and safety information guide

• Legal & license information

Downloading the user documentation

We recommend you visit the Cisco web site regular ly for updated versions of the user documentation. Go to:

► http://www.cisco.com/go/sx-docs

Guidelines how to find the documentation on the Cisco web site are included in the

► User documentation on the Cisco web site appendix.

Software

You can download the software for your product from the Cisco web site. Go to:

► http://www.cisco.com/cisco/software/navigator.html

We recommend reading the Sof tware Release Notes (TC7), go to:

► http://www.cisco.com/c/en/us/support/collaborationendpoints/telepresence-quick-set-series/tsd-productssupport-series-home.html

Page 6

Cisco TelePresence SX10 Quick Set Administrator Guide

What’s new in this version

This section provides an overview of the new and changed system settings and new features in the TC7.2 software version.

Software release notes

For a complete over view of new features and changes, we recommend reading the Sof tware Release Notes (TC7). Go to:

► http://www.cisco.com/c/en/us/support/collaborationendpoints/telepresence-quick-set-series/tsd-productssupport-series-home.html

Software download

For software download go to:

► http://www.cisco.com/cisco/software/navigator.html

New features and improvements

Support for Touch 10 network pairing

Network pairing of the Touch 10 user interface is suppor ted.

Web snapshot s can be enabled remotely from the web interface

Web snapshots can be enabled remotely from the web interface. In previous versions web snapshots had to be enabled locally on the endpoint.

Improved fail-over support for endpoints registered through Collaboration Edge

CUCM: If the CUCM is down, the endpoint will automatically re-register to another CUCM.

VCS Control and VCS Expressway: If the VCS Control or VCS Expressway goes down, the endpoint will automatically re-register to another VCS Control / VCS E xpressway. Call preservation is not supported.

Provisioning (HTTPS): If the provisioning ser vice goes down, the endpoint will receive provisioning data from another provisioning service.

Phone book: If the phone book service goes down, the endpoint will automatically use another phone book service.

More parameters can be provisioned from CUCM

The following configuration parameters can now be provisioned from CUCM under vendor specific configuration:

• SystemUnit Name

• Video OSD TodaysBookings

• Standby StandbyAction

• Audio DefaultVolume

• Conference 1 MaxTotalReceiveCallRate

• Conference 1 MaxTotalTransmitCallRate

Improved language support in active mode

SX10 in active mode (using the remote control) suppor ts the same languages as the other TC endpoints except for the mirrored languages, e.g. Arabic. When SX10 is paired to Touch 10 also the mirrored languages are supported.

Collaboration Edge provisioning option added to the setup assistant

The SX10 can now be provisioned through Collaboration Edge by selecting the “CUCM via Expressway” provisioning option.

Touch user interface and on-screen display (OSD) screenshots can be captured from the web interface

A new web feature has been implemented to be able to capture screenshots of the OSD and the touch panel. This feature is available even if web snapshots are disabled.

The Video Output status provides information about the connected display

In order to identify the connected display model and its preferred resolution the Video Output status will now print the following values:

• Video Output Connector n Connected

• Video Output Connector n ConnectedDevice Name

• Video Output Connector n ConnectedDevice PreferredFormat

Page 7

Cisco TelePresence SX10 Quick Set Administrator Guide

System configuration changes

New configurations

NetworkServices CTMS Encryption

NetworkServices CTMS Mode

NetworkServices Medianet Metadata

Peripherals Pairing CiscoTouchPanels RemotePairing

Peripherals Profile TouchPanels

Time OlsonZone

Configurations that are modified

UserInterface Language

OLD: <English> NEW: <English/ChineseSimplified/ ChineseTraditional/

Catalan/Czech/Danish/Dutch/Finnish/French/ German/ Hungarian/Italian/Japanese/Korean/Norwegian/Polish/ PortugueseBrazilian/Russian/Spanish/SpanishLatin/ Swedish/Turkish/ A rabic/Hebrew>

Video Input Connector[n] InputSourceType

OLD: <other/camera/PC/DVD/document_camera> NEW: <other/camera/PC/DVD/document_camera/

whiteboard>

Page 8

Cisco TelePresence SX10 Quick Set Administrator Guide

The Cisco TelePresence SX10 Quick Set is an all-in-one unit designed to video-enable small collaboration spaces.

It is a high quality unit that combines camera and codec into a compact device that is mounted over a standard f lat-panel display. It can be connected to power and LAN through a single cable for both power and Ethernet (PoE).

The camera has a wide-angle field of view, and provides good overview even in small spaces. High-definition video is enabled with 1080p30 resolution.

Features and benefits

• Optimal definition up to 1080p30 with content sharing at WXGA p5

• Wide angle 83° horizontal f ield of view with 5x zoom (optical and digital)

• Ready-to-use unit with Power over Ethernet (PoE)

• Integrated microphone

• Energy efficient with low power consumption (EU Class B)

• Registers with Cisco Unified Communications Manager (UCM) and Cisco TelePresence Video Communication Server (VCS)

SX10 Quick Set at a glance

SX10 Quick Set mounted on top

of a standard flat-panel display

SX10 Quick Set is delivered with a TRC6 remote control. You may also order the Cisco TelePresence Table Microphone 20 (optional)

Page 9

Cisco TelePresence SX10 Quick Set Administrator Guide

The screen and the remote control

How to operate the video system using the TRC6 remote control is described in full detail in the User guide for the video system.

Operating tips

Use the Cursor controls to move about the screen. Press OK/Enter to open the selected menu field.

Use the Cancel key to exit a menu (and return to the

Home screen), undoing any changes. Use the Back

key to go just one step back.

Place calls. Share content.

Access Settings,

Standby mode and the Do Not Disturb feature.

Access the Camera Control menu.

1 2 3

4 5 6

7 8 9

pqrs tuv wxyz

defabc

ghi jkl mno

Volume control and

Increase/Decrease control

Field selector / Cursor keys

Go back one step

Microphone mute/unmute

Reject incoming call / End call / Cancel / Back to Home screen (outside calls)

Place call / Accept incoming call

OK/Enter

Keypad

Page 10

Cisco TelePresence SX10 Quick Set Administrator Guide

Chapter 2

Web interface

Page 11

Cisco TelePresence SX10 Quick Set Administrator Guide

1. Connect to the video system

2. Sign in

Enter the user name and password for your video system and click Sign In.

The system is delivered with a default user named admin with no password. Leave the Password field blank when signing in for the first time.

It is mandator y to set a password for the admin user, see the next page.

Signing out

Hover the mouse

over the user

name and choose

Sign out from the

drop-down list.

Accessing the web interface

The web interface provides full configuration access to your video conference system.

You can connect from a computer and administer the system remotely.

In this chapter you will find information how to use the web interface for system configuration and maintenance.

We recommend that you use the latest release of one of the major web browsers.

Open a web browser and enter the IP address of the video system in the address bar.

How to find the IP address

Remote control: Navigate to the contact information in the upper, left corner of the screen and press OK. Then open the

Settings menu.

Touch controller: Tap the contact information in the upper lef t corner of the Touch controller and open the

Settings menu. Then tap System Information.

Page 12

Cisco TelePresence SX10 Quick Set Administrator Guide

Changing the system password

It is mandator y to set a password for a user with ADMIN rights in order to restrict access to system configuration. This includes the default admin us er.

A warning, saying that the system password is not set, is shown on screen until you set a password.

You can read more about passwords in the

► Setting passwords ch ap ter.

1. Open the Change Password dialog

Hover the mouse over your the name, and choose Change password in the drop-down list.

2. Set the new password

Enter your current and new passwords as requested, and click Change password for the change to take effect.

If the password currently is not set, leave the Current password field blank.

Page 13

Cisco TelePresence SX10 Quick Set Administrator Guide

Configuration

System Configuration

System Stat us

Local Con tents Manag ement

Personalization

The interactive menu

The web interface provides access to tasks and configurations. They are available from the main menu, which appears near the top of the page when you have signed in.

When you hover the mouse over an item in the main menu, you can navigate to its related sub-pages.

Main menu

Hover the mouse over a main menu item in order to see the titles of the related sub-pages.

Click a sub-page’s title to open it. Click the main menu item itself if there are no subpages. Only pages that the user has access rights for are shown

Click Home to return to the System Information page.

Call Control Maintenance

Software Upgrade

Backup and Re store

System Rec overy

Restart

Diagnostics

Troubleshooting

Peripherals

User Administration

Startup Scripts

Sub-pages

You can read more about u ser admini stration , user roles and access

rights in th e ► User administration section.

API

Call Histo ry

Security

Log Files

User Inter face Scre enshots

Page 14

Cisco TelePresence SX10 Quick Set Administrator Guide

System information

The video system’s Home page shows an overview of the basic set-up and status of the system

This includes information like system name and product type, which soft ware version the system runs, its IPaddres s, etc. Also the registration status for the video network (SIP) is included, as well as the number/URI to use when making a call to the system.

Navigate to: Home

The system infor mation show n in the illus tration serve as an

example. Your syste m may be different.

Page 15

Cisco TelePresence SX10 Quick Set Administrator Guide

Placing a call

You can use the Call Control page to place a call.

Even if the web inter face is used to initiate the call, it is the video system (display, microphones and loudspeakers) that is used for the call; it is not the PC running the web interface.

Calling

You can call someone either by choosing a contact name in the Local, Directory or Recents lists, or by typing a complete URI or number in the Search or Dial field. Then click Call in the associated contact card.

Searching the contact lists

Enter one or more characters in the Search or Dial field. Matching entries from the Local, Directory and Recents lists will be listed as you type.

Select the correct entr y in the list and click Call.

Calling someone

Click a contact name, either in the

Local, Directory or Recents lists.

Then click Call in the contact card.

Alternatively, enter the complete URI

or number in the Search and Dial field. Then click the Call button that appears nex t to the URI or number.

Ending a call

If you want to terminate a call, click End all or the button.

Navigate to: Call C ontrol

Page 16

Cisco TelePresence SX10 Quick Set Administrator Guide

Navigate to: Call C ontrol

Sharing content

You can connect a presentation source to one of the external inputs of your video system. Most often a PC is used as presentation source, but other options may be available depending on your system setup.

While in a call you can share content with the far end, that is the other par ticipant in the call.

If you are not in a call, the content is shared locally on your display.

Sharing content

1. Choose a Presentation source from the drop-down list.

2. Click Start Presentation.

Stop content sharing: Click the Stop Presentation button that is present

while sharing.

Page 17

Cisco TelePresence SX10 Quick Set Administrator Guide

Controlling and monitoring a call

You can control and monitor several call features using the Call Control page.

Volume down

Navigate to: Call C ontrol

Call details

If necessary,

scroll your browser to

see the call details.

Show/hide

call details

Volume up

Microphone mute

Click the

information button

to show details

about the call.

Click the but ton

again to hide the

information.

Click the but ton to mute the microphone. Then the text changes to

Microphone: Off.

Click again to unmute.

Page 18

Cisco TelePresence SX10 Quick Set Administrator Guide

Navigate to: Call C ontrol

Controlling your camera

You can control the camera from the Call Control page.

The camera controls (pan, tilt, zoom) are available when the cursor is placed in the Main Source video area.

Note that the camera controls are not available if the system is in standby mode.

Camera preset

Click the preset’s name to move the

camera to it’s default position.

Click OK to close the window.

Pan and tilt

Use the left and right arrows to pan the camera, and the up and down arrows to tilt it.

Zoom

Use + and - to zoom in and out.

Page 19

Cisco TelePresence SX10 Quick Set Administrator Guide

Local layout control

You can choose a local layout using the Call Control page.

The term layout is used to describe the various ways the video and presentation can appear on the screen. Different types of meetings may require different layouts.

Change the layout

Click Change layout, and choose your preferred layout in the window that opens.

The set of layouts to choose from depends on the system configurations.

You may change the layout while in a call.

Navigate to: Call C ontrol

Page 20

Cisco TelePresence SX10 Quick Set Administrator Guide

Snapshots from the video system

Far end snapshots

Capturing snapshots

The snapshot feature, which is disabled by default, allows snapshots captured by the video system to be displayed on the Call Control page. Captures from the video system’s camera as well as from its presentation channel will be displayed.

This feature might come in handy when administering the video system from a remote location, e.g. to check the camera view.

To use web snapshots you have to sign in with ADMIN credentials.

Enabling the snapshot feature

The snapshot feature is disabled by default. The feature must be enabled using the web interface.

Web interface:

• Go to the Configuration tab and select System

Configuration

• Navigate to Video > AllowWebSnapshots and choose On.

• Click Save for the change to take effect.

Far end snapshots while in a call

While in a call, snapshots of the remote participant’s main camera and presentation channel (far end) will be captured and displayed as shown in the illustration. The snapshots are updated approximately every 30seconds.

Far end snapshots are captured even if web snapshots are disallowed on the far end video system. Web snapshots are prohibited only for encrypted calls.

Take live snapshots

While the Live snapshots box is checked,

snapshots are captured by the video

system (main source and presentation

source) approximately every two seconds.

Click the snapshot in order

to see a larger image.

Navigate to: Call C ontrol

Page 21

Cisco TelePresence SX10 Quick Set Administrator Guide

Controlling the far end camera

While in a call, you can control the remote participant’s camera (far end) provided that:

• The Conference FarEndControl Mode setting is switched On on the far end video system.

• The far end camera has pan, tilt or zoom functionality. Only the relevant controls will appear.

Far end camera control indicator

If this symbol is present, you can control the remote participant’s camera.

Control the remote participant’s camera

1. Click the snapshot to show it in a larger window.

2. Place the cursor in the image to enable the controls.

3. Use the left and right arrows to pan the camera; the up and down arrows to tilt it; and + and - to zoom in and out.

Navigate to: Call C ontrol

Page 22

Cisco TelePresence SX10 Quick Set Administrator Guide

Accessing call information

A call state indicator is available in the top bar in the web interface. It shows whether the system is in a call or not. You may also be notified about incoming calls.

Call state indicator

The call state indicator is

available on all pages except

the Call Control page.

The badge indicates the number

of active calls. If the system is

idle, there is no badge.

Click the indicator to get more

details about connected calls.

Call control

Use these buttons to:

• Show call details

• Put the call on hold

• Disconnect the call

Incoming call notification

As default, a notification is given when the system receives a call.

Check this box, if you do not want to receive such notifications.

Opening the Call Control page

Click Open Call Control to go straight to the Call Control page.

Page 23

Cisco TelePresence SX10 Quick Set Administrator Guide

Selecting a category

The system set tings are structured in categories.

Choose a category in order to display the related settings.

System configuration

The system set tings are grouped in several categories. When you choose a category in the left pane all related settings appear to the right

Each system set ting is fur ther described in the

► System settings cha pt er.

Expanding and collapsing lists

Use these buttons to expand and collapse all or individual lists.

Searching for settings

Enter as many letters as needed in the search field.

All settings (including the value space) containing these letters will be highlighted.

The configur ation shown in the illust ration ser ve as an examp le.

Your system may be co nfigured d ifferent ly.

Navigate to: Configuration > System Configuration

Page 24

Cisco TelePresence SX10 Quick Set Administrator Guide

Changing system settings

All system set tings can be changed from the System Configuration page

. The value space for a setting is specified

either in a drop-down list or by text following the input field.

Different settings may require different user credentials. In order to be sure that an administrator is able to change all system settings, an administrator user must possess all user roles.

You can read more about user administration and user roles in the ► User administration c ha pte r.

Drop-down lis t

Click the arrow to open the drop-down list. Choose the preferred value and click

Save for the change to take effect.

Text input field

Enter text in the input field and click

Save for the change to take effect.

The configur ation shown in the illust ration ser ve as an examp le.

Your system may be co nfigured d ifferent ly.

Navigate to: Configuration > System Configuration

Page 25

Cisco TelePresence SX10 Quick Set Administrator Guide

Navigate to: Configuration > System Status

Selecting a category

The system status is structured in

categories. Choose a category in order

to display the related status information.

Expanding and collapsing lists

Use these buttons to expand and collapse all or individual lists.

Searching for status entries

Enter as many letters as needed in the search field.

All entries (including the value space) containing these let ters will be highlighted.

System status

The system status is grouped in several categories. When you choose a category in the left column, the related status appears in the window to the right

The status show n in the illus tration se rve as an exam ple. The status

of your system may be diffe rent.

Page 26

Cisco TelePresence SX10 Quick Set Administrator Guide

Managing the local contacts

The local contacts can be accessed from the Touch controller (the Favorites list), the on-screen menu (the Local contacts folder in the Directory) and the Web interface.

Adding a contact

Click Add contact and f ill in

the form that pops up. Then

click Save to store the contact

in the Favorites list / Local

contacts.

Editing contact details

Click a contacts name

followed by Edit contact.

Change the details in the form

as appropriate and click Save.

Deleting a contact

Click a contacts name

followed by Edit contact. Then

click Delete to remove the

entry from the Favorites list /

Local contacts.

Adding a contact method*

You can store more than one contact method for each contact, e.g. video, telephone and mobile.

Storing a contact in a folder

Choose the appropriate folder

from the drop down list.

No folder means that the contact

will be stored at the top level.

Note that only the f irst contact metho d appears i n the Favorite s list

on the Touch contr oller. All conta ct methods a re availabl e when using the re mote control.

Navigate to: Configuration > Local Contacts Management

Page 27

Cisco TelePresence SX10 Quick Set Administrator Guide

Local contacts folders

The entries in the Favorites list / Local contacts can be organized in folders.

Opening a folder

Click the folder name to open the folder and show its list of contacts.

Adding a folder

Click Add folder and fill in the form that pops up. Then click

Save to create the folder.

Changing or Deleting a folder

Click Edit folder and update the

information in the form that pops up.

Then click Save to store the changes

Click Delete to remove the folder

and all its contacts and sub-folders.

Confirm your choice in the dialog that

pops up.

Navigate to: Configuration > Local Contacts Management

Page 28

Cisco TelePresence SX10 Quick Set Administrator Guide

Choosing a wallpaper

If you want the company logo or another custom picture as background on the video display, you may upload and use a custom wallpaper.

Activate/deactivate a wallpaper

Available wallpapers are represented by a miniature. If you have uploaded a custom wallpaper, it will appear in the list.

Click the miniature to switch to the corresponding wallpaper. Choose None if you do not want a wallpaper.

The chosen option is highlighted.

Upload a custom wallpaper

Click Bro wse ... and locate your custom wallpaper image file.

Click Upload to save the file on the video system.

Supported file formats: BMP, GIF, JPEG, PNG Maximum file size: 2 MByte

The custom wallpaper will be automatically activated once uploaded.

Navigate to: Configuration > Personalization

Delete the custom wallpaper

Click the delete symbol to remove the custom

wallpaper from the video system. Note that this

will remove the image file completely; you have to

upload it anew if you want to use it again.

Page 29

Cisco TelePresence SX10 Quick Set Administrator Guide

Choosing a ringtone

You can choose from a set of predefined ringtones. The chosen ringtone can be played back from this page.

The ringtone will be played back on the video system itself, and not through the web inter face.

Changing ringtone

Choose a ringtone from the drop-down list, and click Save to make it the active ringtone.

Playing back the ringtone

Click the play button ( ► ) to play back the ringtone.

Use the stop button (  ) to end the playback.

Navigate to: Configuration > Personalization

Set the ringtone volume

Use the slide bar to adjust the ringtone volume.

Page 30

Cisco TelePresence SX10 Quick Set Administrator Guide

Peripherals overview

This page shows an overview of devices that are connected to the video system, like video inputs and outputs, cameras, microphones and Touch controllers

The peripher als shown in t he illustr ation ser ve as example s. Your

system may have differen t peripher als and vid eo input/ou tput configurations.

Navigate to: Configuration > Peripherals

Page 31

Cisco TelePresence SX10 Quick Set Administrator Guide

User administration

You can manage your video conference system’s user accounts from this page.

The default user account

The system comes with a default administrator user account with full access rights. The user name is admin and no password is set.

It is mandator y to set a password for the admin use r.

Read more about passwords in the ► Setting passwords ch apter.

About user roles

A user account must hold one or a combination of several user roles.

The following three user roles, with non-overlapping rights, exist:

• ADMIN: A user holding this role can create new users and change most settings. The user neither can upload audit certif icates nor change the security audit settings.

• USER: A user holding this role can make calls and search the phone book. The user can modify a few settings, e.g. adjusting the ringtone volume and setting the time and date format.

• AUDIT: A user holding this role can change the securit y audit configurations and upload audit certificates.

An administrator user account with full access rights, like the default admin user, must possess all the three roles.

Default user account

The system comes with admin as the default user account. This user has full access rights.

Navigate to: Configuration > User Administration

(page 1 of 4)

Page 32

Cisco TelePresence SX10 Quick Set Administrator Guide

User administration

Creating a new user account

Follow these steps in order to create a new user account:

1. Click Add new user....

2. Fill in the Username and Password

, and check the

appropriate user roles check boxes.

As a default the user has to change the password when signing in for the first time.

Do not fill in the Client Cer tificate DN (Distinguished Name) field unless you want to use certificate login on HTTPS.

3. Set the Status to Active to activate the user.

4. Click Create User to save the changes.

Use the Back button to leave without making any changes.

Navigate to: Configuration > User Administration

The pass word is used with the web inte rface an d command li ne

interface.

(page 2 of 4)

Page 33

Cisco TelePresence SX10 Quick Set Administrator Guide

User administration

Changing user privileges

Follow these steps in order to change the user privileges:

1. Click the name of an existing user to open the Editing user window.

2. Check the appropriate user roles check boxes, decide if the user has to change the password on the next sign in, and fill in the Client Certificate DN f ield if using certificate login on HT TPS.

3. Click Update User to save the changes.

Use the Back button to leave without making any changes.

Changing the password

Follow these steps in order to change the password*:

1. Click the name of an existing user to open the Editing user window.

2. Enter the new password in the appropriate input fields.

3. Click Change Password to save the change.

Use the Back button to leave without making any changes.

Navigate to: Configuration > User Administration

The pass word is used with the web inte rface an d command li ne

interface.

(page 3 of 4)

Page 34

Cisco TelePresence SX10 Quick Set Administrator Guide

User administration

Deactivating a user account

Follow these steps in order to deactivate a user account:

1. Click the name of an existing user to open the Editing user window.

2. Set the Status to Inactive.

3. Click Update User to save the changes.

Use the Back button to leave without making any changes.

Deleting a user account

Follow these steps in order to delete a user account:

1. Click the name of an existing user to open the Editing user window.

2. Click Delete <user name>... and confirm when prompted.

Navigate to: Configuration > User Administration

(page 4 of 4)

Page 35

Cisco TelePresence SX10 Quick Set Administrator Guide

Adding a sign in banner

If a system administrator wants to provide initial information to all users, he can create a sign in banner. The message will be shown when the user signs in to the web interface and the command line interface.

Adding a sign in banner

Enter the message that you

want to present to the user

when signing in, and click

Save to activate the banner.

Navigate to: Configuration > Sign In Banner

Page 36

Cisco TelePresence SX10 Quick Set Administrator Guide

Managing the video system’s certificates

Certif icate validation may be required when using TLS (Transport Layer Security).

A server or client may require that your video system presents a valid certif icate to them before communication can be set up.

The video system’s certificates are text files that verify the authenticity of the system. These cer tificates may be issued by a certif icate authority (CA).

The certificates are listed as shown in the illustration to the right

. They can be used for the following services: HTTPS

server, SIP, IEEE 802.1X and audit logging.

You can store several cer tificates on the system, but only one certif icate can be used for each service at a time.

If authentication fails, the connection will not be established.

Enabling and disabling certificates

Use the buttons to switch a cer tificate on or off for the different services.

You can also view a certificate, and delete a certificate using the corresponding buttons.

Contact your system administrator to obtain the following file(s):

• Certif icate (file format: .PEM)

• Private key, either as a separate file or included in the same file as the certificate (file format: .PEM format)

• Password (required only if the private key is encr ypte d)

The certificate and the private key will be stored in the same file on the video system.

Adding a certificate

1. Click Browse... and find the Certificate and Private key file(s) on your computer.

2. Fill in the Password if required.

3. Click Add certificate... to store the certif icate on your system.

Navigate to: Configuration > Security: Certificates tab

The cer tificate s and cert ificate is suers sho wn in the illu stration serve as examples. Your sys tem may have othe r certif icate(s).

Page 37

Cisco TelePresence SX10 Quick Set Administrator Guide

Managing the list of trusted certificate authorities

Certif icate validation may be required when using TLS (Transport Layer Security).

Your video system may be set up to require that a server or client presents its certificate to the video system before communication can be set up.

The certificates are text files that verify the authenticit y of the server or client. The cer tificates must be signed by a trusted certificate authority (CA).

To be able to verify the signature of the certificates, a list of trusted CAs must reside on the video system. The certificates of the CAs are listed as shown in the illustration to the right

The list must include all CAs needed in order to verify certif icates for audit logging, HT TPS, SIP and IEEE 802.1X connections.

If the server cannot be authenticated, the connection will not be established.

The cer tificate a nd certi ficate iss uers show n in the illus tration se rve as example s. Your system will have other cer tificate (s).

Contact your system administrator to obtain the CA certificate list (file format: .PEM).

Viewing and deleting certificates

You can view a certificate, and delete a certificate using the corresponding buttons.

Uploading a list of certificate authorities

i. Click Bro wse ... and find the file containing a

list of CA certificates (file format: .PEM) on

your computer.

ii. Click the Add certificate authority... to store

the new CA certificate(s) on your system.

The entries in a new file with CA certificates will be appended to the existing list, so that the previously stored cer tificates will not be deleted.

Navigate to: Configuration > Securit y: CAs tab

(page 1 of 2)

Page 38

Cisco TelePresence SX10 Quick Set Administrator Guide

iii

Managing the list of trusted certificate authorities

As from software version TC7.2, the signature of an audit server is verified using the same CA list as other servers/clients.

Setting up secure audit logging

Audit logging records all sign in activit y and configuration changes on your video system.

Audit logging is disabled by default, but you can enable it using the Security > Audit > Logging > Mode setting.

In ExternalSecure audit logging mode the video system sends encr ypted audit logs to an external audit server (syslog server), which identity must be verified by a signed certificate.

If the audit server cannot be authenticated, the logs will not be sent.

Always upload the list of trusted certificate authorities before enabling secure audit logging.

Enable secure audit logging

i. Go to the System

Configuration page and

choose the Security category.

ii. Enter the Address of

the audit ser ver. If you choose Manual

PortAssignment, you

must also enter a Port number for the audit server. Click Save for the changes to take ef fect.

iii. Choose ExternalSecure

from the Logging Mode drop-down list. Click

Save for the change to

take effect.

Navigate to: Configuration > Securit y: CAs tab / Configuration > System Configuration

(page 2 of 2)

Page 39

Cisco TelePresence SX10 Quick Set Administrator Guide

Managing pre-installed certificates for Edge provisioning

The list of pre-installed certificates that is shown on this page in the web interface

, contains certificates that will be used when the video system is provisioned by Cisco Unified Communications Manager (CUCM) via Expressway (Edge). Only Edge infrastructure certificates will be checked against this list.

If the Edge infrastructure certificate validation fails, the video system will not receive the provisioning and not be registered.

Factory resetting the video system will not delete the list of pre-installed certificates.

Navigate to: Configuration > Securit y: Preinstalled CAs tab

The cer tificate a nd certi ficate iss uers show n in the illus tration se rve as example s. Your system will have other cer tificate (s).

Viewing or disabling certificates

You can view a certificate, and disable a cer tificate using the corresponding buttons.

You can disable all the preinstalled certificates, and use a manually uploaded list of certif icates for verification instead. See the Configuration > Security:

CAs page how to upload trusted

certif icates to the video system manually.

Page 40

Cisco TelePresence SX10 Quick Set Administrator Guide

Setting strong security mode

Strong security mode should be used only when compliance with DoD JITC regulations is required.

Read the provided information carefully before setting strong security mode.

Strong security mode sets very strict password requirements, and requires all users to change their password on the next sign in.

Software upload from TMS, web snapshots and calling from the web interface are prohibited in strong security mode.

Setting strong security mode

Read carefully about the consequences of

strong security mode before you continue.

1. If you want to use strong security mode,

click Enable strong security mode....

Confirm your choice in the dialog box

that appears.

The system will restart automatically.

2. Change the password when you are

prompted. The new password must meet

the strict criteria as described.

How to change the system password is

described in the ► Setting passwords

section.

Return to normal mode

When in strong security mode, the system

can be restored to normal mode by clicking

Disable strong security mode.... Confirm your

choice in the dialog box that appears

The system will restart automatically.

Navigate to: Configuration > Securit y: Strong Security Mode tab

Page 41

Cisco TelePresence SX10 Quick Set Administrator Guide

Changing the persistency mode

By default, all persistency settings are set to Persistent. This means that configurations, call histor y, internal logs, local phonebook / favorites list and IP connectivity information are stored as normal. A system restart does not delete information.

As a general rule, we recommend NOT to change the default settings for persistency. But in the case were a

new user is not supposed to see or trace back to any kind of logged information from the previous session, Non- persistent mode must be used.

In order to clear/delete information that was stored before changing to Non-persistent mode, you should consider to factory reset the video system.

There is more information about perfor ming a factor y reset in the ► Factory resetting appendix.

When in Non-persistent mode, the following information will be lost/cleared each time the system restarts:

• System Configuration changes that have been made since the last system restart.

• Information about calls that are placed or received since the last system restart (call history).

• Internal log f iles that has been made since the last system restart.

• Changes that are made to the local contacts / favorites list since the last system restart.

• All IP related information (DHCP) from the last session.

Checking the persistency status

The radio buttons that are active when you open the Security page and go to the Non-persistent Mode tab, shows the current persistency status of the video system.

You can also see the status by checking Security >

Persistency on the Configuration > System Status page.

Changing the persistency settings

1. Set the persistency settings for the five categories as desired.

2. Click Save and reboot....

The system will restart. After the restart, behavior according to the new persistency settings will start.

Note that logs, configurations etc. that was stored before you switch to Nonpersistent mode, will not be cleared or deleted.

Navigate to: Configuration > Securit y: Non-persistent Mode tab

Page 42

Cisco TelePresence SX10 Quick Set Administrator Guide

Deleting trust lists (CUCM only)

The information on this page is only relevant for video systems that are registered to a Cisco Unif ied Communications Manager (CUCM).

The web interface can be used to delete existing trust lists (CTL and ITL) that are stored on the video system. Normally, you will not delete the old CTL and ITL files, but there are a few cases when you will need to delete them.

The trust lists’ fingerprints and an overview of the certificates in the lists are displayed on the web page. This information can be useful for troubleshooting.

For more information about CUCM and trust lists, read the Administering TC Endpoints on CUCM guide available on the Cisco web site.

Navigate to: Configuration > Securit y: CUCM tab

Page 43

Cisco TelePresence SX10 Quick Set Administrator Guide

Troubleshooting

The troubleshooting page lists the status for some common sources of errors. The list may be different for different products and installations

Note that critical issues and errors are clearly marked in red color; warnings are yellow.

Run diagnostics

Click Re-run diagnostics to make sure the information in the list is up-to-date.

The mess ages shown in the illust ration ser ve as examp les. Your system may sh ow other infor mation.

Leave standby mode

This button is only visible when the system is in standby mode. If in standby mode, click Deactivate standby to wake up the system.

Navigate to: Diagnostics > Troubleshooting

Page 44

Cisco TelePresence SX10 Quick Set Administrator Guide

Downloading log files

The log files* are Cisco specific debug f iles which may be requested by the Cisco support organization if you need technical support.

The current log files are time stamped event log files.

All current log files are archived in a time stamped historical log file each time the system restarts. If the maximum number of historical log files is reached, the oldest one will be overwritten.

Downloading all log files

Click Download logs archive and follow the instructions.

Use the drop down list if you want to include the call history in the archive. You can choose whether to include the full call history or to make the caller/ callee anonymous.

The log fi les shown in t he illustr ation ser ve as examples. Your system may have other files.

Open/save one log f ile

Click the file name to open the log file in the web browser; right click to save the file on the computer.

Navigate to: Diagnostics > Log Files

Refresh the list of log files

Page 45

Cisco TelePresence SX10 Quick Set Administrator Guide

Starting extended logging

Extended logging mode may be switched on to help diagnose network issues and problems during call setup. While in this mode more information is stored in the log files.

Note that extended logging uses more of your video system’s resources, and may cause your video system to underperform. You should only use extended logging mode when troubleshooting an issue.

Start extended logging

Click Start extended logging.

Extended logging lasts for 10 minutes. You can stop the extended logging before it times out by clicking the Stop extended logging button that appears when extended logging is on.

As default, the network traffic is not captured. Use the drop down menu if you want to include a full or partial capture of the network traf fic.

Navigate to: Diagnostics > Log Files

Page 46

Cisco TelePresence SX10 Quick Set Administrator Guide

Capturing screenshots

You can capture screenshots both of a Touch controller that is connected to the video system, and of the on-screen display (menus, indicators and messages on the main display).

Deleting screenshots

Navigate to: Diagnostics > User Interface Screenshots

If you want to delete all screenshots, click Remove all.

To delete just one screenshot, click the

button for that screenshot.

Capture a screenshot

Click Take screenshot of Touch Panel to capture a screenshot of the Touch controller, or click Take screenshot of OSD to capture a screenshot of the on-screen display.

The screenshot will display in the area below the buttons. Note that it can take up to 30 seconds before the screenshot is ready.

All captured snapshots are included in the list above the but tons. Click the screenshot ID to display the image.

Page 47

Cisco TelePresence SX10 Quick Set Administrator Guide

Upgrading the system software

This video conference system is using TC software. The version described in this document is TC7.2.

Contact your system administrator if you have questions about the sof tware version.

Software release notes

For a complete over view of the news and changes, we recommend reading the Sof tware Release Notes (TC7).

Go to: ► http://www.cisco.com/c/en/us/support/

collaboration-endpoints/telepresence-quick-set-series/tsdproducts-support-series-home.html

New software

For software download, go to the Cisco Download Software web page:

► http://www.cisco.com/cisco/software/navigator.html.

Then navigate to your product.

The format of the file name is“s 52030 tc7_2_0.pkg” (e ach software version has a unique file name).

Adding option keys

An option key is required to activate optional functionality. You may have several option keys in your system. If the keys are already installed, you can skip this point and continue with the sof tware installation.

If you do not have the required key(s), contact your Cisco representative to obtain them.

i. Enter an Option Key in the appropriate text input field

and click Add.

If you have more than one option key, repeat this step for all keys.

Each system has unique keys, for example:

• 1R000-1-AA7A4A09

Installing new software

Download the appropriate software package from the Cisco Software Download web page (see link to the lef t) and store it on your local computer. This is a .pkg file.

i. Click Bro wse ... and find the downloaded .pkg file that

contains the new software.

ii. Check the Upgrade automatically after upload check

box, then click Upload to start the installation process straight away.

Keep the check box unchecked if you want to upload the software now and do the installation later.

The complete installation may take up to 30minutes. You can follow the progress on the web page. The system restarts automatically after the installation.

You must sign in anew in order to continue working with the web interface after the restar t.

Navigate to: Maintenance > Sof tware Upgrade

Page 48

Cisco TelePresence SX10 Quick Set Administrator Guide

Backup and restore

All the system settings, which are available on the System configuration page, can be listed on-screen or stored as a text file.

The text file can be loaded back onto the system, thereby restoring the configuration.

Backing up or showing the current configuration

Click Preview backup to display the current settings on-screen.

Click Take backup to store the configuration as a text file.

Restoring an earlier configuration

Click Bro wse ... and find the file with the configuration you want to restore.

Click Restore to reconfigure the system as defined in the file.

Navigate to: Maintenance > Backup and Restore

Page 49

Cisco TelePresence SX10 Quick Set Administrator Guide

Reverting to the previously used software version

If there is a severe problem with the video system, switching to the previously used software version may help solving the problem.

If the system has not been factor y reset since the last software upgrade, the previously used software image still resides on the system; you do not have to download the software again.

Reverting to the previously used soft ware version should only be done by a system administrator or in contact with Cisco technical support.

We strongly recommend that you backup your system’s log files and configuration before you swap to the other soft ware image.

Navigate to: Maintenance > System Recovery: Backup tab and Software Recover y Swap tab

1. Revert to the previously used software version by clicking Switch to software

TCx.y.z..., where x.y.z indicates the

software version.

2. Click Yes to confirm your choice, or

Cancel if you have changed your mind.

Wait while the system resets. The system will restart automatically when finished.

1. Backing up log files and system configuration

We recommend that you backup your system’s log files and configuration before you swap to the other software image.

Click Download Logs and Download

Configuration Backup and follow the

instructions to save the files on your computer.

2. Reverting to the previously used software version

Page 50

Cisco TelePresence SX10 Quick Set Administrator Guide

Factory reset

If there is a severe problem with the video system, the last resort may be to reset it to its default factory settings. Always consider rever ting to the previously used software image before performing a factor y reset. In many situations this will recover the system*.

A factory reset should only be performed by a system administrator or in contact with Cisco technical support.

When factor y resetting the video system the following happens:

• The call logs will be deleted.

• Passwords will be reset to default.

• All system parameters will be reset to default values.

• All files that have been uploaded to the system will be deleted. This includes, but is not limited to, custom wallpapers, certificates, local contacts and favorites list.

• The previous (inactive) software image will be deleted.

• Option keys will not be affected.

The system restarts automatically af ter the reset. It is using the same sof tware image as before.

We strongly recommend that you backup your system’s log files and configuration before you per form a factor y reset.

It is not possible to undo a factor y reset.

There is more information about perfor ming a factor y reset in the ► Factory resetting appendix.

2. Performing a factor y reset

Read the provided information carefully

before you click Per form a factory reset....

Click Yes to confirm your choice, or Cancel if you have changed your mind.

Wait while the system resets. The system will restar t automatically when finished.

Navigate to: Maintenance > System Recovery: Backup tab and Factory Reset tab

1. Backing up log files and system configuration

We strongly recommend that you backup your system’s log files and configuration before you perform a factor y reset; otherwise these data will be lost.

Click Download Logs and Download

Configuration Backup and follow the

instructions to save the files on your computer.

Read abou t softwa re swappin g in the ► Rever ting to the pre viously

used software version section.

Page 51

Cisco TelePresence SX10 Quick Set Administrator Guide

Remote support user

In cases where you need to diagnose problems on the video system you can create a remote suppor t user.

The remote support user will be granted read access to the system and will have access to a limited set of commands that can aid troubleshooting.

You will need assistance from Cisco Technical Assistance Center (TAC) to acquire the password for the remote support user.

The remote support user should only be enabled for troubleshooting reasons when instructed by Ci sc o TA C.

Navigate to: Maintenance > System Recovery: Remote Support User tab

Create remote support user

1. Open a case with Cisco TAC.

2. Click Create user.

3. Copy the text in the To ke n field and send to Cisco TAC.

4. Cisco TAC will generate a password.

The remote support user is valid for seven days, or until it is deleted.

Delete remote support user

Click Delete user.

Page 52

Cisco TelePresence SX10 Quick Set Administrator Guide

Restarting the system

The system can be shut down or restarted remotely using the web interface.

Restarting the system

Click Restart TelePresence device... to restart the system.

It will take a few minutes before the system is ready for use.

Shutting down the system

Click Shutdown TelePresence device... to shut down the system.

The system cannot be turned on again remotely; you must press its power but ton physically to turn it on.

Navigate to: Maintenance > Restart

Page 53

Cisco TelePresence SX10 Quick Set Administrator Guide

Chapter 3

System settings

Page 54

Cisco TelePresence SX10 Quick Set Administrator Guide

Overview of the system settings

In the following pages you will find a complete list of the system settings which are configured from the System

Configuration page on the web interface. The examples show

either the default value or an example of a value.

Open a web browser and enter the IP address of the video system

; then sign in.

Audio settings ....................................................................... 57

Audio DefaultVolume............................................................... 57

Audio Input Microphone [1] ..................................................... 57

Audio Microphones Mute Enabled .......................................... 57

Audio SoundsAndAlerts KeyTones Mode ............................... 57

Audio SoundsAndAlerts RingTone .......................................... 57

Audio SoundsAndAlerts RingVolume...................................... 57

Cameras settings .................................................................. 58

Cameras Camera [1] Backlight ................................................ 58

Cameras Camera [1] Brightness Level .................................... 58

Cameras Camera [1] Brightness Mode ................................... 58

Cameras Camera [1] Flip ......................................................... 58

Cameras Camera [1] Focus Mode........................................... 58

Cameras Camera [1] Mirror ..................................................... 59

Cameras Camera [1] Whitebalance Level ............................... 59

Cameras Camera [1] Whitebalance Mode .............................. 59

Conference settings ............................................................. 60

Conference [1..1] ActiveControl Mode .................................... 60

Conference [1..1] AutoAnswer Delay ....................................... 60

Conference [1..1] AutoAnswer Mode ...................................... 60

Conference [1..1] AutoAnswer Mute ........................................ 60

Conference [1..1] CallProtocolIPStack ..................................... 60

Conference [1..1] DefaultCall Rate ............................................61

Conference [1..1] DoNotDisturb DefaultTimeout ......................61

Conference [1..1] Encryption Mode ..........................................61

Conference [1..1] FarEndControl Mode ....................................61

Conference [1..1] FarEndControl SignalCapability ....................61

Conference [1..1] MaxReceiveCallRate ................................... 62

Conference [1..1] MaxTotalReceiveCallRate ............................ 62

Conference [1..1] MaxTotalTransmitCallRate ........................... 62

Conference [1..1] MaxTransmitCallRate ................................... 62

Conference [1..1] MicUnmuteOnDisconnect Mode ..................61

Conference [1..1] Presentation OnPlacedOnHold ................... 63

Conference [1..1] Presentation RelayQuality ........................... 63

Conference [1..1] VideoBandwidth MainChannel Weight ........ 62

Conference [1..1] VideoBandwidth Mode ................................ 62

Conference [1..1] VideoBandwidth PresentationChannel Weight

..................................................................................... 63

FacilityService settings ......................................................... 64

FacilityService Service [1..5] CallType .................................... 64

FacilityService Service [1..5] Name ........................................ 64

FacilityService Service [1..5] Number ..................................... 64

FacilityService Service [1..5] Type .......................................... 64

Logging settings ................................................................... 65

Logging Mode ......................................................................... 65

Network settings ................................................................... 66

Network [1..1] DHCP RequestTFTPServerAddress ................. 67

Network [1..1] DNS Domain Name ........................................... 67

Network [1..1] DNS Server [1..3] Address ................................ 67

Network [1..1] IEEE8021X AnonymousIdentity ......................... 70

Network [1..1] IEEE8021X Eap Md5 ......................................... 70

Network [1..1] IEEE8021X Eap Peap .........................................71

Network [1..1] IEEE8021X Eap Tls .............................................71

Network [1..1] IEEE8021X Eap Ttls ............................................71

Network [1..1] IEEE8021X Identity ............................................ 70

Network [1..1] IEEE8021X Mode .............................................. 69

Network [1..1] IEEE8021X Password ........................................ 70

Network [1..1] IEEE8021X TlsVerify .......................................... 70

Network [1..1] IEEE8021X UseClientCertificate ....................... 70

Network [1..1] IPStack .............................................................. 66

Network [1..1] IPv4 Address .................................................... 66

Network [1..1] IPv4 Assignment ............................................... 66

Network [1..1] IPv4 Gateway .................................................... 66

Network [1..1] IPv4 SubnetMask .............................................. 66

Network [1..1] IPv6 Address .................................................... 67

Network [1..1] IPv6 Assignment ............................................... 66

Network [1..1] IPv6 DHCPOptions ........................................... 67

Network [1..1] IPv6 Gateway .................................................... 67

Network [1..1] MTU ...................................................................71

Network [1..1] QoS Diffserv Audio ........................................... 68

Network [1..1] QoS Diffserv Data ............................................. 68

Network [1..1] QoS Diffserv ICMPv6 ....................................... 69

Network [1..1] QoS Diffserv NTP ............................................. 69

Network [1..1] QoS Diffserv Signalling ..................................... 69

Network [1..1] QoS Diffserv Video ........................................... 68

* How to fi nd the IP add ress (IPv4 or IP v6):

Navigate to th e contact in formation in the upper, left corner of the screen a nd press OK on th e remote contr ol. Then ope n the

Settings menu.

Page 55

Cisco TelePresence SX10 Quick Set Administrator Guide

Network [1..1] QoS Mode ........................................................ 68

Network [1..1] RemoteAccess Allow .........................................71

Network [1..1] TrafficControl Mode ...........................................71

Network [1..1] VLAN Voice Mode ............................................ 72

Network [1..1] VLAN Voice VlanId............................................ 72

NetworkServices settings ..................................................... 73

NetworkServices CTMS Encryption ....................................... 76

NetworkServices CTMS Mode ............................................... 76

NetworkServices HTTP Mode ................................................ 73

NetworkServices HTTPS Mode .............................................. 73

NetworkServices HTTPS OCSP Mode .................................... 74

NetworkServices HTTPS OCSP URL ......................................74

NetworkServices HT TPS VerifyClientCertif icate .....................74

NetworkServices HT TPS VerifyServerCertificate ...................74

NetworkServices Medianet Metadata .....................................74

NetworkServices NTP Address .............................................. 75

NetworkServices NTP Mode ................................................... 74

NetworkServices SIP Mode .................................................... 73

NetworkServices SNMP CommunityName ............................ 75

NetworkServices SNMP Host [1..3] Address .......................... 75

NetworkServices SNMP Mode ............................................... 75

NetworkServices SNMP SystemContact ............................... 75

NetworkServices SNMP SystemLocation .............................. 75

NetworkServices SSH AllowPublicKey ................................... 76

NetworkServices SSH Mode .................................................. 76

NetworkServices Telnet Mode ............................................... 73

NetworkServices WelcomeText .............................................. 73

NetworkServices XMLAPI Mode ............................................ 73

Peripherals settings .............................................................. 77

Peripherals Pairing CiscoTouchPanels RemotePairing ........... 77

Peripherals Profile TouchPanels ............................................. 77

Phonebook settings .............................................................. 78

Phonebook Server [1..1] ID ...................................................... 78

Phonebook Server [1..1] Type ................................................. 78

Phonebook Server [1..1] URL .................................................. 78

Provisioning settings ............................................................. 79

Provisioning Connectivity ....................................................... 79

Provisioning ExternalManager Address .................................. 80

Provisioning ExternalManager AlternateAddress.................... 80

Provisioning ExternalManager Domain ................................... 80

Provisioning ExternalManager Path ........................................ 80

Provisioning ExternalManager Protocol .................................. 80

Provisioning HttpMethod ........................................................ 79

Provisioning LoginName ......................................................... 79

Provisioning Mode .................................................................. 79

Provisioning Password ............................................................ 79

RTP settings .......................................................................... 81

RTP Ports Range Star t .............................................................81

RTP Ports Range Stop .............................................................81

Security settings ................................................................... 82

Security Audit Logging M ode ................................................. 82

Security Audit OnError Action ................................................. 82

Security Audit Server Address ............................................... 82

Security Audit Server Port ...................................................... 82

Security Audit Server Port Assignment ................................... 82

Security Session InactivityTimeout ......................................... 83

Security Session ShowLastLogon .......................................... 83

SerialPort settings ................................................................ 84

SerialPort LoginRequired ........................................................ 84

SerialPort Mode ...................................................................... 84

SIP settings ........................................................................... 85

SIP ANAT ................................................................................ 85

SIP AuthenticateTransferror .................................................... 85

SIP ListenPort ......................................................................... 85

SIP OCSP DefaultResponder .................................................. 85

SIP OCSP Mode...................................................................... 85

SIP PreferredIPMedia .............................................................. 85

SIP PreferredIPSignaling ......................................................... 85

SIP Profile [1..1] Authentication [1..1] LoginName .................... 87

SIP Profile [1..1] Authentication [1..1] Password ....................... 87

SIP Profile [1..1] DefaultTransport ............................................ 87

SIP Profile [1..1] DisplayName.................................................. 87

SIP Profile [1..1] Ice DefaultCandidate ..................................... 86

SIP Profile [1..1] Ice Mode ........................................................ 86

SIP Profile [1..1] Line ................................................................ 88

SIP Profile [1..1] Mailbox .......................................................... 88

SIP Profile [1..1] Outbound ....................................................... 88

SIP Profile [1..1] Proxy [1..4] Address ....................................... 88

SIP Profile [1..1] Proxy [1..4] Discovery .................................... 88

SIP Profile [1..1] TlsVerify ......................................................... 87

SIP Profile [1..1] Turn BandwidthProbe .................................... 86

SIP Profile [1..1] Turn DiscoverMode ....................................... 86

SIP Profile [1..1] Turn DropRflx ................................................. 86

SIP Profile [1..1] Turn Password ............................................... 87

SIP Profile [1..1] Turn Server .................................................... 86

SIP Profile [1..1] Turn UserName ............................................. 86

SIP Profile [1..1] Type ............................................................... 88

SIP Profile [1..1] URI ................................................................. 87

Standby settings ................................................................... 89

Standby BootAction ................................................................ 89

Standby Control ...................................................................... 89

Standby Delay ......................................................................... 89

Standby StandbyAction .......................................................... 89

Standby WakeupAction ........................................................... 89

SystemUnit settings .............................................................. 90

SystemUnit CallLogging Mode ...............................................90

SystemUnit ContactInfo Type ................................................. 90

SystemUnit MenuLanguage .................................................... 90

SystemUnit Name ................................................................... 90

Time settings ........................................................................ 91

Time DateFormat .....................................................................91

Time OlsonZone ..................................................................... 92

Time TimeFormat .....................................................................91

Time Zone ................................................................................91

UserInterface settings ........................................................... 94

UserInterface Language ......................................................... 94

UserInterface OSD EncryptionIndicator .................................. 94

UserInterface OSD LanguageSelection .................................. 94

UserInterface OSD LoginRequired.......................................... 94

UserInterface OSD Output ...................................................... 94

UserInterface TouchPanel DefaultPanel ................................. 95

UserInterface UserPreferences .............................................. 95

UserInterface Wallpaper ......................................................... 94

Page 56

Cisco TelePresence SX10 Quick Set Administrator Guide

Video settings ....................................................................... 96

Video AllowWebSnapshots ..................................................... 96

Video CamCtrlPip CallSetup Duration .................................... 96

Video CamCtrlPip CallSetup Mode ......................................... 96

Video Input Connector [1..3] CameraControl CameraId ......... 97

Video Input Connector [1..3] CameraControl Mode ................ 97

Video Input Connector [1..3] InputSourceType ....................... 96

Video Input Connector [1..3] Name ......................................... 96

Video Input Connector [1..3] OptimalDefinition Profile ............ 97

Video Input Connector [1..3] Visibility ..................................... 97

Video Input Connector [2..3] PresentationSelection ............... 98

Video Input Connector [2..3] Quality ....................................... 97

Video Input Connector [2] RGBQuantizationRange ................. 98

Video Layout LocalLayoutFamily ............................................ 98

Video Layout PresentationDefault View .................................. 98

Video Layout RemoteLayoutFamily ......................................... 99

Video Layout ScaleToFrame ................................................... 99

Video Layout ScaleToFrameThreshold .................................... 99

Video Layout Scaling .............................................................. 99

Video Monitors .......................................................................101

Video OSD EncryptionIndicator .............................................101

Video OSD LanguageSelection .............................................101

Video OSD LoginRequired .....................................................101

Video OSD Output .................................................................101

Video Output Connector [1] CEC M ode .................................101

Video Output Connector [1] OverscanLevel...........................101

Video Output Connector [1] Resolution ................................. 102

Video Output Connector [1] RGBQuantizatonRange ............. 10 2

Video PIP ActiveSpeaker DefaultValue Position ................... 100

Video PIP Presentation DefaultValue Position ...................... 100

Video SelfviewDefault FullscreenMode .................................101

Video SelfviewDefault Mode ................................................. 100

Video SelfviewDefault PIPPosition .........................................101

Video SelfviewPosition ......................................................... 10 0

Video WallPaper.................................................................... 102

Experimental settings ..........................................................103

Page 57

Cisco TelePresence SX10 Quick Set Administrator Guide

Audio settings

Audio Input Microphone [1]

Set the audio input microphone mode.

Requires user role: ADMIN

Value space: <Off/On>

Off: Disable the microphone connector. On: Enable the microphone connector.

Example:

Audio Input Microphone 1 Mode: On

Audio Microphones Mute Enabled

Determine whether audio-mute is allowed or not. The default value is True.

Requires user role: ADMIN

Value space: <True/InCallOnly>

Tru e: Muting of audio is always available. InCallOnly: Muting of audio is only available when the device is in a call. When Idle it is not

possible to mute the microphone. This is useful when an external telephone service/audio system is connected via the codec and is to be available when the codec is not in a call. When set to InCallOnly this will prevent the audio-system from being muted by mistake.

Example:

Audio Microphones Mute Enabled: True

Audio SoundsAndAlerts KeyTones Mode

The system can be configured to make a keyboard click sound effect (key tone) when pressing a key on the remote control, or when typing text or numbers on the Touch controller.

Requires user role: USER

Value space: <Off/On>

Off: No key tone will be played when you press a key. On: You will hear a key tone when you press a key.

Example:

Audio SoundsAnd Alerts KeyTones Mode: On

Audio SoundsAndAlerts RingTone

This setting defines which ringtone to use for incoming calls. You need to enter the exact name of the ringtone. You can find the available ringtones the following ways.

Web interface: On the Configuration > Personalization page. Touch controller: On the Ringtone & Sound panel of the Settings menu. This panel is either

in the open part of the Settings menu, or included in the password protected Administrator menu. The User Interface UserPreference setting defines which panels will be in the password protected area.

Requires user role: USER

Value space: <S: 1, 100>

Format: String with a maximum of 100 character s.

Example:

Audio SoundsAnd Alerts RingTone: "Sunrise"

Audio SoundsAndAlerts RingVolume

Sets the ring volume for an incoming call.

Requires user role: USER

Value space: <0..100>

Range: The value goes in steps of 5 from 0 to 100 (from -34.5 dB to 15 dB). Volume 0 = Off.

Example:

Audio SoundsAnd Alerts RingVolume: 50

Audio DefaultVolume

Set the default speaker volume. The volume returns to this value when you switch on or restart the video system. Use the remote control or Touch controller to change the volume while the video system is running.

Requires user role: USER

Value space: <0..100>

Range: The value must be between 0 and 100. The values from 1 to 100 correspond to the range from -34.5 dB to 15 dB (0.5 dB steps). The value 0 means that the audio is switched off.

Example:

Audio DefaultVolume: 50

Page 58

Cisco TelePresence SX10 Quick Set Administrator Guide

Cameras settings

Cameras Camera [1] Backlight

This configuration turns backlight compensation on or off. Backlight compensation is useful when there is much light behind the persons in the room. Without compensation the persons will easily appear very dark to the far end.

Requires user role: ADMIN

Value space: <Off/On>

Off: Turn off the camera backlight compensation. On: Turn on the camera backlight compensation.

Example:

Cameras Ca mera 1 Backlight: Off

Cameras Camera [1] Brightness Mode

Set the camera brightness mode.

Requires user role: ADMIN

Value space: <Auto/Manual>

Auto: The camera brightness is automatically set by the system. Manual: Enable manual control of the camera brightness. The brightness level is set using

the Cameras Camera Brightness Level setting.

Example:

Cameras Ca mera 1 Brightness Mode: Auto

Cameras Camera [1] Brightness Level

Set the brightness level. Requires the Camera Brightness Mode to be set to Manual.

Requires user role: ADMIN

Value space: <1..31>

Range: Select a value from 1 to 31.

Example:

Cameras Ca mera 1 Brightness Level: 20

Cameras Camera [1] Flip

With Flip mode (vertical flip) you can flip the image upside down.

Requires user role: ADMIN

Value space: <Auto/Off/On>

Auto: When the camera is placed upside down the image is automatically flipped upside down. This set ting will only take effect for a camera that automatically detects which way it is mounted.

Off: Display the video on screen the normal way. On: When enabled the video on screen is flipped. This setting is used when a camera is

mounted upside down, but cannot automatically detect which way it is mounted.

Example:

Cameras Ca mera 1 Flip: Auto

Cameras Camera [1] Focus Mode

Set the camera focus mode.

Requires user role: ADMIN

Value space: <Auto/Manual>

Auto: The camera will auto focus once a call is connected, as well as after moving the camera (pan, tilt, zoom). The system will use auto focus only for a few seconds to set the right focus; then auto focus is turned off to prevent continuous focus adjustments of the camera.

Manual: Turn the autofocus off and adjust the camera focus manually.

Example:

Cameras Ca mera 1 Focus Mode: Auto

Page 59

Cisco TelePresence SX10 Quick Set Administrator Guide

Cameras Camera [1] Mirror

With Mirror mode (horizontal flip) you can mirror the image on screen.

Requires user role: ADMIN

Value space: <Auto/Off/On>

Auto: When the camera is placed upside down the image is automatically mirrored. Use this setting with cameras that can be mounted upside down, and that can auto detect that the camera is mounted upside down.

Off: See the self-view in normal mode, that is the experience of self-view is as seeing yourself as other people see you.

On: See the self-view in mirror mode, that is the self-view is reversed and the experience of self-view is as seeing yourself in a mirror.

Example:

Cameras Ca mera 1 Mirror: Auto

Cameras Camera [1] Whitebalance Mode

Set the camera white balance mode.

Requires user role: ADMIN

Value space: <Auto/Manual>

Auto: The camera will continuously adjust the white balance depending on the camera view. Manual: Enables manual control of the camera white balance. The white balance level is set

using the Cameras Camera W hitebalance Level setting.

Example:

Cameras Ca mera 1 Whitebalance Mode: Auto

Cameras Camera [1] Whitebalance Level

Set the white balance level. Requires the Camera Whitebalance Mode to be set to manual.

Requires user role: ADMIN

Value space: <1..16>

Range: Select a value from 1 to 16.

Example:

Cameras Ca mera 1 Whitebalance Level: 1

Page 60

Cisco TelePresence SX10 Quick Set Administrator Guide

Conference settings

Conference [1..1] ActiveControl Mode

Active control is a feature that allows conference participants to administer a conference on Cisco TelePresence Server using the video system's interfaces. Each user can see the participant list, change video layout, disconnect participants, etc. from the interface. The active control feature is enabled by default, provided that it is supported by the infrastructure (Cisco Unified Communications Manager (CUCM) version 9.1.2 or newer, Cisco TelePresence Video Communication Server (VCS) version X8.1 or newer). Change this setting if you want to disable the active control features.

Requires user role: ADMIN

Value space: <Auto/Off>

Auto: Active control is enabled when supported by the infrastructure. Off: Active control is disabled.

Example:

Conference ActiveControl Mode: Auto

Conference [1..1] CallProtocolIPStack

Select if the system should enable IPv4, IPv6, or dual IP stack on the call protocol (SIP).

Requires user role: ADMIN

Value space: <Dual/IPv4/IPv6>

Dual: Enables both IPv4 and IPv6 for the call protocol. IPv4: When set to IPv4, the call protocol will use IPv4. IPv6: When set to IPv6, the call protocol will use IPv6.

Example:

Conference 1 CallProtocolIPStack: Dual

Conference [1..1] AutoAnswer Mode

Set the auto answer mode. Use the Conference AutoAnswer Delay set ting if you want the system to wait a number of seconds before answering the call, and use the Conference AutoAnswer Mute setting if you want your microphone to be muted when the call is answered.

Requires user role: ADMIN

Value space: <Off/On>

Off: You must answer incomming calls manually by pressing the OK key or the green Call key on the remote control, or by tapping Answer on the Touch controller.

On: The system automatically answer s incoming calls, except if you are already in a call. You must always answer or decline incoming calls manually when you are already engaged in a call.

Example:

Conference 1 AutoAnswer Mode: Off

Conference [1..1] AutoAnswer Mute

Determine if the microphone shall be muted when an incoming call is automatically answered. Requires that AutoAnswer Mode is switched on.

Requires user role: ADMIN

Value space: <Off/On>

Off: The incoming call will not be muted. On: The incoming call will be muted when automatically answered.

Example:

Conference 1 AutoAnswer Mute: Off

Conference [1..1] AutoAnswer Delay

Define how long (in seconds) an incoming call has to wait before it is answered automatically by the system. Requires that AutoAnswer Mode is switched on.

Requires user role: ADMIN

Value space: <0..50>

Range: Select a value from 0 to 50 seconds.

Example:

Conference 1 AutoAnswer Delay: 0

Page 61

Cisco TelePresence SX10 Quick Set Administrator Guide

Conference [1..1] MicUnmuteOnDisconnect Mode

Determine if the microphones shall be unmuted automatically when all calls are disconnected. In a meeting room or other shared resources this may be done to prepare the system for the ne xt u se r.

Requires user role: ADMIN

Value space: <Off/On>

Off: If muted during a call, let the microphones remain muted af ter the call is disconnected. On: Unmute the microphones after the call is disconnected.

Example:

Conference 1 MicUnmuteOnDisconnect Mode: On

Conference [1..1] DoNotDisturb DefaultTimeout

This setting determines the default duration of a Do Not Disturb session, i.e. the period when incoming calls are rejected and registered as missed calls. The session can be terminated earlier by using the user inter face (remote control or Touch controller). The default value is 60 minutes.

Requires user role: ADMIN

Value space: <0..1440>

Range: Select the number of minutes (between 0 and 1440, i.e. 24 hours) before the Do Not Disturb session times out automatically.

Example:

Conference 1 DoNotDisturb DefaultTimeOut: 60

Conference [1..1] FarEndControl Mode

Lets you decide if the remote side (far end) should be allowed to select your video sources and control your local camera (pan, tilt, zoom).

Requires user role: ADMIN

Value space: <Off/On>

Off: The far end is not allowed to select your video sources or to control your local camera (pan, tilt, zoom).

On: Allows the far end to be able to select your video sources and control your local camera (pan, tilt, zoom). You will still be able to control your camera and select your video sources as normal.

Example:

Conference 1 FarEndControl Mode: On

Conference [1..1] FarEndControl SignalCapability

Set the far end control (H.224) signal capabilit y mode.

Requires user role: ADMIN

Value space: <Off/On>

Off: Disable the far end control signal capability. On: Enable the far end control signal capability.

Example:

Conference 1 FarEndControl SignalCapability: On

Conference [1..1] Encryption Mode

Set the conference encryption mode. A padlock with the text "Encryption On" or "Encryption Off" displays on screen for a few seconds when the conference starts.

NOTE: Requires the Encryption Option Key to be installed. When the Encryption Option Key is not installed the encryption mode is set to Off.

Requires user role: ADMIN

Value space: <Off/On/BestEffort>

Off: The system will not use encryption. On: The system will only allow calls that are encrypted. BestEffor t: The system will use encryption whenever possible. > In Point to point calls: If the far end system suppor ts encryption (AES-128), the call will be

encrypted. If not, the call will proceed without encr yption. > In MultiSite calls: In order to have encr ypted MultiSite conferences, all sites must support

encryption. If not, the conference will be unencrypted.

Example:

Conference 1 Encryption Mode: BestEffort

Conference [1..1] DefaultCall Rate

Set the Default Call Rate to be used when placing calls from the system.

Requires user role: ADMIN

Value space: <64..3072>

Range: Select a value between 64 and 3072 kbps.

Example:

Conference 1 DefaultCall Rate: 1920

Page 62

Cisco TelePresence SX10 Quick Set Administrator Guide

Conference [1..1] MaxTransmitCallRate

Specify the maximum transmit bit rate to be used when placing or receiving calls. Note that this is the maximum bit rate for each individual call; use the Conference MaxTotalTransmitCallRate setting to set the aggregated ma ximum for all simultaneous active calls.

Requires user role: ADMIN

Value space: <64..3072>

Range: Select a value between 64 and 3072 kbps.

Example:

Conference 1 MaxTransmitCallRate: 3072

Conference [1..1] MaxReceiveCallRate

Specify the maximum receive bit rate to be used when placing or receiving calls. Note that this is the maximum bit rate for each individual call; use the Conference MaxTotalReceiveCallRate setting to set the aggregated ma ximum for all simultaneous active calls.

Requires user role: ADMIN

Value space: <64..3072>

Range: Select a value between 64 and 3072 kbps.

Example:

Conference 1 MaxReceiveCallRate: 3072

Conference [1..1] MaxTotalTransmitCallRate

Specify the maximum overall transmit bit rate allowed. This product does not support multiple simultaneous calls, so the total transmit call rate will be the same as the transmit bit rate for one call (ref. Conference MaxTransmitCallRate setting).

Requires user role: ADMIN

Value space: <64..3072>

Range: Select a value between 64 and 3072.

Example:

Conference 1 MaxTotalTransmitCallRate: 3072

Conference [1..1] MaxTotalReceiveCallRate

Specify the maximum overall receive bit rate allowed. This product does not suppor t multiple simultaneous calls, so the total receive call rate will be the same as the receive bit rate for one call (ref. Conference MaxReceiveCallRate setting).

Requires user role: ADMIN

Value space: <64..3072>

Range: Select a value between 64 and 3072.

Example:

Conference 1 MaxTotalReceiveCallRate: 3072

Conference [1..1] VideoBandwidth Mode

Set the conference video bandwidth mode.

Requires user role: ADMIN

Value space: <Dynamic/Static>

Dynamic: The available transmit bandwidth for the video channels are distributed among the currently active channels. If there is no presentation, the main video channels will use the bandwidth of the presentation channel.

Static: The available transmit bandwidth is assigned to each video channel, even if it is not active.

Example:

Conference 1 VideoBandwidth Mode: Dynamic

Conference [1..1] VideoBandwidth MainChannel Weight

The available transmit video bandwidth is distributed on the main channel and presentation channel according to "MainChannel Weight" and "PresentationChannel Weight". If the main channel weight is 2 and the presentation channel weight is 1, then the main channel will use twice as much bandwidth as the presentation channel.

Requires user role: ADMIN

Value space: <1..10>

Range: 1 to 10.

Example:

Conference 1 VideoBandwidth MainChannel Weight: 5

Page 63

Cisco TelePresence SX10 Quick Set Administrator Guide

Conference [1..1] VideoBandwidth PresentationChannel Weight

Requires user role: ADMIN

Value space: <1..10>

Range: 1 to 10.

Example:

Conference 1 VideoBandwidth PresentationChannel Weight: 2

Conference [1..1] Presentation RelayQuality

Not applicable in this version.

Conference [1..1] Presentation OnPlacedOnHold

Define whether or not to continue sharing a presentation af ter the remote site has put you on hold.

Requires user role: ADMIN

Value space: <Stop/NoAction>

Stop: The video system stops the presentation sharing when the remote site puts you on hold. The presentation will not continue when the call is resumed.

NoActio n: The video system will not stop the presentation shar ing when put on hold. The presentation will not be shared while you are on hold, but it will continue automatically when the call is resumed.

Example:

Conference 1 Presentation OnPlacedOnHold: NoAction

Page 64

Cisco TelePresence SX10 Quick Set Administrator Guide

FacilityService settings

FacilityService Service [1..5] Type

Not applicable in this version.

FacilityService Service [1..5] Name

Not applicable in this version.

FacilityService Service [1..5] Number

Not applicable in this version.

FacilityService Service [1..5] CallType

Not applicable in this version.

Page 65

Cisco TelePresence SX10 Quick Set Administrator Guide

Logging settings

Logging Mode

Not applicable in this version.

Page 66

Cisco TelePresence SX10 Quick Set Administrator Guide

Network settings

Network [1..1] IPStack

Select if the system should use IPv4, IPv6, or dual IP stack, on the network interface. NOTE: After changing this setting you may have to wait up to 30 seconds before it takes effect.

Requires user role: ADMIN

Value space: <Dual/IPv4/IPv6>

Dual: When set to Dual, the net work interface can operate on both IP versions at the same time, and can have both an IPv4 and an IPv6 address at the same time.

IPv4: When set to IPv4, the system will use IP v4 on the networ k interface. IPv6: When set to IPv6, the system will use IPv6 on the network interface.

Example:

Network 1 IPStack: Dual

Network [1..1] IPv4 Assignment

Define how the system will obtain its IPv4 address, subnet mask and gateway address. This setting only applies to systems on IPv4 networks.

Requires user role: ADMIN

Value space: <Static/DHCP>

Static: The addresses must be configured manually using the Net work IPv4 Address, Network IPv4 Gateway and Network IPv4 SubnetMask settings (static addresses).

DHCP: The system addresses are automatically assigned by the DHCP server.

Example:

Network 1 IPv4 Assignment: DHCP

Network [1..1] IPv4 Address

Enter the static IPv4 network address for the system. This set ting is only applicable when Network Assignment is set to Static.

Requires user role: ADMIN

Value space: <S: 0, 64>

Format: A valid IPv4 address.

Example:

Network 1 IPv4 Address: "192.0.2.2"

Network [1..1] IPv4 Gateway

Define the IPv4 network gateway. This setting is only applicable when the Net work Assignment is set to Static.

Requires user role: ADMIN

Value space: <S: 0, 64>

Format: A valid IPv4 address.

Example:

Network 1 IPv4 Gateway: "192.0.2.1"

Network [1..1] IPv4 SubnetMask

Define the IPv4 network subnet mask. This setting is only applicable when the Network Assignment is set to Static.

Requires user role: ADMIN

Value space: <S: 0, 64>

Format: The valid IPv4 address format.

Example:

Network 1 IPv4 SubnetMask: "255.255.255.0"

Network [1..1] IPv6 Assignment

Define how the system will obtain its IPv6 address and the default gateway address. This setting only applies to systems on IPv6 networks.

Requires user role: ADMIN

Value space: <Static/DHCPv6/Autoconf>

Static: The codec and gateway IP addresses must be configured manually using the Net work IPv6 Address and Network IPv6 Gateway settings. The options, for example NTP and DNS server addresses, must either be set manually or obtained from a DHCPv6 server. The Network IPv6 DHCPOptions setting determines which method to use.

DHC Pv 6: All IPv6 addresses, including options, will be obtained from a DHCPv6 server. See RFC 3315 for a detailed description. The Network IPv6 DHCPOptions setting will be ignored.

Autoconf: Enable IPv6 stateless autoconfiguration of the IPv6 network interface. See RFC 4862 for a detailed description. The options, for example NTP and DNS server addresses, must either be set manually or obtained from a DHCPv6 server. The Network IPv6 DHCPOptions setting determines which method to use.

Example:

Network 1 IPv6 Assignment: Autoconf

Page 67

Cisco TelePresence SX10 Quick Set Administrator Guide

Network [1..1] IPv6 Address

Enter the static IPv6 network address for the system. This setting is only applicable when the Network IPv6 Assignment is set to Static.

Requires user role: ADMIN

Value space: <S: 0, 64>

Format: A valid IPv6 address.

Example:

Network 1 IP v6 Add ress: "2001:0DB8:0000:0000:0000:0000:0000:0002"

Network [1..1] IPv6 Gateway

Define the IPv6 network gateway address. This setting is only applicable when the Network IPv6 Assignment is set to Static.

Requires user role: ADMIN

Value space: <S: 0, 64>

Format: A valid IPv6 address.

Example:

Network 1 IP v6 Gateway: "2001:0DB8:0000:0000:0000:0000:0000:0001"

Network [1..1] IPv6 DHCPOptions

Retrieve a set of DHCP options, for example NTP and DNS server addresses, from a DHCPv6 server.

Requires user role: ADMIN

Value space: <Off/On>

Off: Disable the retrieval of DHCP options from a DHCPv6 server. On: Enable the retrieval of a selected set of DHCP options from a DHCPv6 server.

Example:

Network 1 IPv6 DHCPOptions: On

Network [1..1] DHCP RequestTFTPServerAddress

This setting is used only for video systems that are registered to a Cisco Unified Communications Manager (CUCM).

The setting determines whether the endpoint should ask the DHCP server for DHCP option 150, so that it can discover the address of the TFTP server (provisioning server) automatically.

If this setting is Off or the DHCP ser ver does not support option 150, the TFTP ser ver address must be set manually using the Provisioning ExternalManager Address setting.

If the Network VLAN Voice Mode setting is Auto and the Cisco Discover y Protocol (CDP) assigns an ID to the voice VLAN, then a request for option 150 will always be sent. That is, the Network DHCP RequestTFTFServerAddress setting will be ignored.

Requires user role: ADMIN

Value space: <Off/On>

Off: The video system will not send a request for DHCP option 150 and the address of the TFTP ser ver must be set manually. See the note above for any exception to this rule.

On: The video system will send a request for option 150 to the DHCP server so that it can automatically discover the address of the T FTP ser ver.

Example:

Network 1 DHCP RequestTFTPServerAddress: On

Network [1..1] DNS Domain Name

DNS Domain Name is the default domain name suffix which is added to unqualified names. Example: If the DNS Domain Name is "company.com" and the name to lookup is

"MyVideoSystem", this will result in the DNS lookup "MyVideoSystem.company.com".

Requires user role: ADMIN

Value space: <S: 0, 64>

Format: String with a maximum of 64 characters.

Example:

Network 1 DNS Domain Name: ""

Network [1..1] DNS Server [1..3] Address

Define the network addresses for DNS servers. Up to 3 addresses may be specified. If the network addresses are unknown, contact your administrator or Internet Service Provider.

Requires user role: ADMIN

Value space: <S: 0, 64>

Format: A valid IPv4 address or IPv6 address.

Example:

Network 1 DNS Server 1 Address: ""

Page 68

Cisco TelePresence SX10 Quick Set Administrator Guide

Network [1..1] QoS Mode

The QoS (Quality of Service) is a method which handles the priority of audio, video and data in the network. The QoS set tings must be supported by the infrastructure. Dif fserv (Differentiated Services) is a computer networking architecture that specifies a simple, scalable and coarsegrained mechanism for clas sifying, managing net work traffic and providing QoS priorities on modern IP networks.

Requires user role: ADMIN

Value space: <Off/Diffserv>

Off: No QoS method is used. Diffserv: When you set the QoS Mode to Diffser v, the Network QoS Diffserv Audio, Network

QoS Diffserv Video, Network Q oS Diffserv Data, Network QoS Diffser v Signalling, Network QoS Diffserv ICMPv6 and Network QoS Diffser v NTP settings are used to pr ioritize packets.

Example:

Network 1 QoS Mode: Diffserv

Network [1..1] QoS Diffserv Audio

This setting will only take effect if Network QoS Mode is set to Diffserv. Define which priorit y Audio packets should have in the IP network. The priority for the packets ranges from 0 to 63 - the higher the number, the higher the priority.

The recommended class for Audio is CS4, which equals the decimal value 32. If in doubt, contact your network administrator.

The priority set here might be overridden when packets are leaving the net work controlled by the local net work administrator.

Requires user role: ADMIN

Value space: <0..63>

Range: Select a value between 0 to 63 - the higher the number, the higher the priority. The default value is 0 (best effort).

Example:

Network 1 QoS Diffserv Audio: 0

Network [1..1] QoS Diffserv Video

This setting will only take effect if Network QoS Mode is set to Diffserv. Define which priorit y Video packets should have in the IP network. The packets on the

presentation channel (shared content) are also in the Video packet category. The priority for the packets ranges from 0 to 63 - the higher the number, the higher the priority. The recommended class for Video is CS4, which equals the decimal value 32. If in doubt, contact your network administrator.

The priority set here might be overridden when packets are leaving the net work controlled by the local net work administrator.

Requires user role: ADMIN

Value space: <0..63>

Range: Select a value between 0 to 63 - the higher the number, the higher the priority. The default value is 0 (best effort).

Example:

Network 1 QoS Diffserv Video: 0

Network [1..1] QoS Diffserv Data

This setting will only take effect if Network QoS Mode is set to Diffserv. Define which priorit y Data packets should have in the IP network. The priority for the packets ranges from 0 to 63 - the higher the number, the higher the priority.

The recommended value for Data is 0, which means best effor t. If in doubt, contact your network administrator.

The priority set here might be overridden when packets are leaving the net work controlled by the local net work administrator.

Requires user role: ADMIN

Value space: <0..63>

Range: Select a value between 0 to 63 - the higher the number, the higher the priority. The default value is 0 (best effort).

Example:

Network 1 QoS Diffserv Data: 0

Page 69

Cisco TelePresence SX10 Quick Set Administrator Guide

Network [1..1] QoS Diffserv Signalling

This setting will only take effect if Network QoS Mode is set to Diffserv. Define which priorit y Signalling packets that are deemed critical (time-sensitive) for the real-

time operation should have in the IP network. The priority for the packets ranges from 0 to 63 - the higher the number, the higher the priority.

The recommended class for Signalling is CS3, which equals the decimal value 24. If in doubt, contact your network administrator.

The priority set here might be overridden when packets are leaving the net work controlled by the local net work administrator.

Requires user role: ADMIN

Value space: <0..63>

Range: Select a value between 0 to 63 - the higher the number, the higher the priority. The default value is 0 (best effort).

Example:

Network 1 QoS Diffserv Signalling: 0

Network [1..1] QoS Diffserv ICMPv6

This setting will only take effect if Network QoS Mode is set to Diffserv. Define which priorit y ICMPv6 packets should have in the IP network. The priority for the packets ranges from 0 to 63 - the higher the number, the higher the priority.

The recommended value for ICMPv6 is 0, which means best effort. If in doubt, contact your network administrator.

The priority set here might be overridden when packets are leaving the net work controlled by the local net work administrator.

Requires user role: ADMIN

Value space: <0..63>

Range: Select a value between 0 to 63 - the higher the number, the higher the priority. The default value is 0 (best effort).

Example:

Network 1 QoS Diffserv ICMPv6: 0

Network [1..1] QoS Diffserv NTP

This setting will only take effect if Network QoS Mode is set to Diffserv. Define which priorit y NTP packets should have in the IP network. The priority for the packets ranges from 0 to 63 - the higher the number, the higher the priority.

The recommended value for NTP is 0, which means best effor t. If in doubt, contact your network administrator.

The priority set here might be overridden when packets are leaving the net work controlled by the local net work administrator.

Requires user role: ADMIN

Value space: <0..63>

Range: Select a value between 0 to 63 - the higher the number, the higher the priority. The default value is 0 (best effort).

Example:

Network 1 QoS Diffserv NTP: 0

Network [1..1] IEEE8021X Mode

The system can be connected to an IEEE 802.1X LAN network, with a por t-based network access control that is used to provide authenticated network access for Ethernet networks.

Requires user role: ADMIN

Value space: <Off/On>

Off: The 802.1X authentication is disabled (default). On: The 802.1X authentication is enabled.

Example:

Network 1 IEEE8021X Mode: Off

Page 70

Cisco TelePresence SX10 Quick Set Administrator Guide

Network [1..1] IEEE8021X TlsVerify

Verification of the server-side certificate of an IEEE802.1x connection against the cer tificates in the local CA-list when TLS is used. The CA-list must be uploaded to the video system. This can be done from the web interface.

This setting takes effect only when Net work [1..1] IEEE8021X Eap Tls is enabled (On).

Requires user role: ADMIN

Value space: <Off/On>

Off: When set to Off, TLS connections are allowed without verifying the server-side X.509 certif icate against the local CA-list. This should typically be selected if no CA-list has been uploaded to the codec.

On: When set to On, the ser ver-side X.509 certif icate will be validated against the local CAlist for all TLS connections. Only servers with a valid certificate will be allowed.

Example:

Network 1 IEEE8021X TlsVerify: Off

Network [1..1] IEEE8021X UseClientCertificate

Authentication using a private key/certificate pair during an IEEE802.1x connection. The authentication X.509 cer tificate must be uploaded to the video system. This can be done from the web interface.

Requires user role: ADMIN

Value space: <Off/On>

Off: When set to Off client-side authentication is not used (only ser ver-side). On: When set to On the client (video system) will per form a mutual authentication TLS

handshake with the server.

Example:

Network 1 IEEE8021X UseClientCertificate: Off

Network [1..1] IEEE8021X Identity

The 802.1X Identity is the user name needed for 802.1X authentication.

Requires user role: ADMIN

Value space: <S: 0, 64>

Format: String with a maximum of 64 characters.

Example:

Network 1 IEEE8021X Identity: ""

Network [1..1] IEEE8021X Password

The 802.1X Password is the password needed for 802.1X authentication.

Requires user role: ADMIN

Value space: <S: 0, 32>

Format: String with a maximum of 32 characters.

Example:

Network 1 IEEE8021X Password: ""

Network [1..1] IEEE8021X AnonymousIdentity

The 802.1X Anonymous ID string is to be used as unencr ypted identity with EAP (Extensible Authentication Protocol) types that support dif ferent tunneled identity, like EAP-PEAP and E APTTLS. If set, the anonymous ID will be used for the initial (unencrypted) EA P Identity Request.

Requires user role: ADMIN

Value space: <S: 0, 64>

Format: String with a maximum of 64 characters.

Example:

Network 1 IEEE8021X AnonymousIdentity: ""

Network [1..1] IEEE8021X Eap Md5

Set the Md5 (Message-Digest Algorithm 5) mode. This is a Challenge Handshake Authentication Protocol that relies on a shared secret. Md5 is a Weak security.

Requires user role: ADMIN

Value space: <Off/On>

Off: The E AP-MD5 protocol is disabled. On: The EAP-MD5 protocol is enabled (default).

Example:

Network 1 IEEE8021X Eap Md5: On

Page 71

Cisco TelePresence SX10 Quick Set Administrator Guide

Network [1..1] IEEE8021X Eap Ttls

Set the TTLS (Tunneled Transport Layer Security) mode. Authenticates LAN clients without the need for client certificates. Developed by Funk Software and Certicom. Usually supported by Agere Systems, Proxim and Avaya.

Requires user role: ADMIN

Value space: <Off/On>

Off: The E AP-TTLS protocol is disabled. On: The EAP-TTLS protocol is enabled (default).

Example:

Network 1 IEEE8021X Eap Ttls: On

Network [1..1] IEEE8021X Eap Tls

Enable or disable the use of EAP-TLS (Transport Layer Securit y) for IEEE802.1x connections. The EAP-TLS protocol, defined in RFC 5216, is considered one of the most secure EAP standards. LAN clients are authenticated using client certificates.

Requires user role: ADMIN

Value space: <Off/On>

Off: The E AP-TLS protocol is disabled. On: The EAP-TLS protocol is enabled (default).

Example:

Network 1 IEEE8021X Eap Tls: On

Network [1..1] IEEE8021X Eap Peap

Set the Peap (Protected Extensible Authentication Protocol) mode. Authenticates LAN clients without the need for client certificates. Developed by Microsoft, Cisco and RSA Security.

Requires user role: ADMIN

Value space: <Off/On>

Off: The E AP-PEAP protocol is disabled. On: The EAP-PEAP protocol is enabled (default).

Example:

Network 1 IEEE8021X Eap Peap: On

Network [1..1] MTU

Set the Ethernet MTU (Maximum Transmission Unit).

Requires user role: ADMIN

Value space: <57 6..150 0>

Range: Select a value from 576 to 1500 bytes.

Example:

Network 1 MTU: 1500

Network [1..1] TrafficControl Mode

Set the network traffic control mode to decide how to control the video packets transmission speed.

Requires user role: ADMIN

Value space: <Off/On>

Off: Transmit video packets at link speed. On: Transmit video packets at maximum 20 Mbps. Can be used to smooth out bursts in the

outgoing net work traffic.

Example:

Network 1 TrafficControl: On

Network [1..1] RemoteAccess Allow

Filter IP addresses for access to ssh/telnet/HTTP/HTTPS.

Requires user role: ADMIN

Value space: <S: 0, 255>

Format: String with a maximum of 255 characters, comma separated IP addresses or IP range.

Example:

Net w or k 1 R e m ot e A c c es s A l l o w: "192.16 8.1.2 31, 192.168.1.182"

Page 72

Cisco TelePresence SX10 Quick Set Administrator Guide

Network [1..1] VLAN Voice Mode

Set the VLAN voice mode. The VLAN Voice Mode will be set to Auto automatically if you have Cisco UCM (Cisco Unified Communications Manager) as provisioning infrastructure.

Requires user role: ADMIN

Value space: <Auto/Manual/Off>

Auto: The Cisco Discover y Protocol (CDP), if available, assigns an id to the voice VLAN. If CDP is not available, VLAN is not enabled.

Manual: The VLAN ID is set manually using the Network VLAN Voice VlanId set ting. If CDP is available, the manually set value will be overruled by the value assigned by CDP.

Off: VLAN is not enabled.

Example:

Network 1 VLAN Voice Mode: Auto

Network [1..1] VLAN Voice VlanId

Set the VLAN voice ID. This set ting will only take effect if VLAN Voice Mode is set to Manual.

Requires user role: ADMIN

Value space: <1..40 94 >

Range: Select a value from 1 to 4094.

Example:

Network 1 VLAN Voice VlanId: 1

Page 73

Cisco TelePresence SX10 Quick Set Administrator Guide

NetworkServices settings

NetworkServices HTTP Mode

Set the HTTP mode to enable/disable access to the system through a web browser. The web interface is used for system management, call management such as call transfer, diagnostics and software uploads.

Requires user role: ADMIN

Value space: <Off/On>

Off: The HTTP protocol is disabled. On: The HTTP protocol is enabled.

Example:

NetworkServices HTTP Mode: On

NetworkServices SIP Mode

Determine whether the system should be able to place and receive SIP calls or not.

Requires user role: ADMIN

Value space: <Off/On>

Off: Disable the possibility to place and receive SIP calls. On: Enable the possibility to place and receive SIP calls (default).

Example:

NetworkServices SIP Mode: On

NetworkServices Telnet Mode

Telnet is a network protocol used on the Internet or Local Area Network (LAN) connections.

Requires user role: ADMIN

Value space: <Off/On>

Off: The Telnet protocol is disabled. This is the factory setting. On: The Telnet protocol is enabled.

Example:

NetworkServices Telnet Mode: Off

NetworkServices WelcomeText

Choose which information the user should see when logging on to the codec through Telnet/ SSH.

Requires user role: ADMIN

Value space: <Off/On>

Off: The welcome text is: Login successful On: The welcome text is: Welcome to <system name>; Soft ware version; Sof tware release

date; Login successful.

Example:

NetworkServices WelcomeText: On

NetworkServices XMLAPI Mode

Not applicable in this version.

NetworkServices HTTPS Mode

HTTPS is a web protocol that encrypts and decrypts user page requests as well as the pages that are returned by the web ser ver.

Requires user role: ADMIN

Value space: <Off/On>

Off: The HTTPS protocol is disabled. On: The HTTPS protocol is enabled.

Example:

NetworkServices HTTPS Mode: On

Page 74

Cisco TelePresence SX10 Quick Set Administrator Guide

NetworkServices HTTPS VerifyServerCertificate

When the video system connects to an external HTTPS server (like a phone book server or an external manager), this server will present a cer tificate to the video system to identify itself.

Requires user role: ADMIN

Value space: <Off/On>

Off: Do not verify ser ver certificates. On: Requires the system to verify that the server certificate is signed by a trusted Certificate

Authorit y (CA). This requires that a list of trusted CA s are uploaded to the system in advance.

Example:

NetworkServices HTTPS VerifyServerCertificate: Off

NetworkServices HTTPS VerifyClientCertificate

When the video system connects to a HTT PS client (like a web browser), the client can be asked to present a certificate to the video system to identif y itself.

Requires user role: ADMIN

Value space: <Off/On>

Off: Do not verify client certificates. On: Requires the client to present a certificate that is signed by a trusted Certificate

Authorit y (CA). This requires that a list of trusted CA s are uploaded to the system in advance.

Example:

NetworkServices HTTPS VerifyClientCertificate: Off

NetworkServices HTTPS OCSP Mode

Define the support for OCSP (Online Cer tificate Status Protocol) responder services. The OCSP feature allows users to enable OCSP instead of certificate revocation lists (CRLs) to check the certificate status.

For any outgoing H TTPS connection, the OCSP responder is queried of the status. If the corresponding certificate has been revoked, then the HTTPS connection will not be used.

Requires user role: ADMIN

Value space: <Off/On>

Off: Disable OCSP support. On: Enable OCSP support.

Example:

NetworkServices HTTPS OCSP Mode: Off

NetworkServices HTTPS OCSP URL

Specify the URL of the OCSP responder (server) that will be used to check the certificate status.

Requires user role: ADMIN

Value space: <S: 0, 255>

Format: String with a maximum of 255 characters.

Example:

NetworkServices HTTPS OCSP URL: "http://ocspserver.company.com:81"

NetworkServices Medianet Metadata

Switch On or Off the capability to tag media flows with metadata related to the Cisco Medianet deployment.

Requires user role: ADMIN

Value space: <Off/On>

Off: Media flows will not be tagged with such metadata. On: Media flows will be tagged with such metadata.

Example:

NetworkServices Med ianet Metadata: Off

NetworkServices NTP Mode

The Network Time Protocol (NTP) is used to synchronize the time of the system to a reference time server. The time server will subsequently be queried every 24th hour for time updates. The time will be displayed on the top of the screen. T he system will use the time to timestamp messages transmitted to Gatekeepers or Border Controllers requiring H.235 authentication. The system will use the time to timestamp messages transmitted to Gatekeepers or Border Controller s that requires H.235 authentication. It is also used for timestamping Placed Calls, Missed Calls and Received Calls.

Requires user role: ADMIN

Value space: <Auto/Off/Manual>

Auto: The system will use the NTP server, by which address is supplied from the DHCP server in the network. If no DHCP ser ver is used, or the DHCP server does not provide the system with a NTP server address, the system will use the static defined NTP ser ver address specified by the user.

Off: The system will not use an N TP server. Manual: The system will always use the static defined NTP server address specif ied by the

us er.

Example:

NetworkServices NTP Mode: Auto

Page 75

Cisco TelePresence SX10 Quick Set Administrator Guide

NetworkServices NTP Address

Enter the NTP Address to define the network time protocol server address. This address will be used if NTP Mode is set to Manual, or if set to Auto and no address is supplied by a DHCP server.

Requires user role: ADMIN

Value space: <S: 0, 64>

Format: A valid IPv4 address, IPv6 address or DNS name.

Example:

NetworkServices NTP Address: "0.tandberg.pool.ntp.org"

NetworkServices SNMP Mode

SNMP (Simple Net work Management Protocol) is used in network management systems to monitor network-attached devices (routers, servers, switches, projectors, etc) for conditions that warrant administrative attention. SNMP exposes management data in the form of variables on the managed systems, which describe the system configuration. These variables can then be queried (set to ReadOnly) and sometimes set (set to ReadWrite) by managing applications.

Requires user role: ADMIN

Value space: <Off/ReadOnly/ReadWrite>

Off: Disable the SNMP network ser vice. ReadOnly: Enable the SNMP network service for queries only. ReadWrite: Enable the SNMP network service for both queries and commands.

Example:

NetworkServices SNMP Mode: ReadOnly

NetworkServices SNMP Host [1..3] Address

Enter the addres s of up to three SNMP Managers. The system's SNMP Agent (in the codec) responds to requests from SNMP Managers (a PC

program etc.), for example about system location and system contact. SNMP traps are not suppor ted.

Requires user role: ADMIN

Value space: <S: 0, 64>

Format: A valid IPv4 address, IPv6 address or DNS name.

Example:

NetworkServices SNMP Host 1 Address: ""

NetworkServices SNMP CommunityName

Enter the name of the Network Services SNMP Community. SNMP Community names are used to authenticate SNMP requests. SNMP requests must have a password (case sensitive) in order to receive a response from the SNMP Agent in the codec. The default password is "public". If you have the Cisco TelePresence Management Suite (TMS) you must make sure the same SNMP Community is configured there too. NOTE: The SNMP Community password is case sensitive.

Requires user role: ADMIN

Value space: <S: 0, 50>

Format: String with a maximum of 50 characters.

Example:

NetworkServices SNMP CommunityName: "public"

NetworkServices SNMP SystemContact

Enter the name of the Network Services SNMP System Contact.

Requires user role: ADMIN

Value space: <S: 0, 50>

Format: String with a maximum of 50 characters.

Example:

NetworkServices SNMP SystemContact: ""

NetworkServices SNMP SystemLocation

Enter the name of the Network Services SNMP System Location.

Requires user role: ADMIN

Value space: <S: 0, 50>

Format: String with a maximum of 50 characters.

Example:

NetworkServices SNMP SystemLocation: ""

Page 76

Cisco TelePresence SX10 Quick Set Administrator Guide

NetworkServices SSH Mode

SSH (or Secure Shell) protocol can provide secure encr ypted communication between the codec and your local computer.

Requires user role: ADMIN

Value space: <Off/On>

Off: The SSH protocol is disabled. On: The SSH protocol is enabled.

Example:

NetworkServices SSH Mode: On

NetworkServices SSH AllowPublicKey

Secure Shell (SSH) public key authentication can be used to access the codec.

Requires user role: ADMIN

Value space: <Off/On>

Off: The SSH public key is not allowed. On: The SSH public key is allowed.

Example:

NetworkServices SSH AllowPu blicKey: On

NetworkServices CTMS Mode

This setting determines whether or not to allow multipar ty conferences controlled by a Cisco TelePresence Multipoint Switch (CTMS).

Video systems are able to initiate or join non-encr ypted multiparty conferences controlled by CTMS version 1.8 or later. Encrypted conferences are supported as from software versions CTMS 1.9.1. Encryption is addressed in the NetworkServices CTMS Encryption setting.

Requires user role: ADMIN

Value space: <Off/On>

Off: Multiparty conferencing via CTMS is prohibited. On: Multipart y conferencing via CTMS is allowed.

Example:

NetworkServices CTMS Mode: On

NetworkServices CTMS Encryption

This setting indicates whether or not the video system supports encryption when participating in a multipar ty meeting controlled by a Cisco TelePresence Multipoint Switch (CTMS).

CTMS allows three securit y settings for meetings: non-secure (not encrypted), best effort (encrypted if all participants suppor t encryption, other wise not encrypted) and secure (always enc rypted).

Requires user role: ADMIN

Value space: <Off/BestEffort>

Off: The video system does not allow encr yption and therefore cannot participate in a secure CTMS meeting (encr ypted). When par ticipating in a best effor t CTMS meeting, the meeting will be downgraded to non-secure (not encrypted).

BestEffor t: The video system can negotiate encryption parameters with CTMS and participate in a secure CTMS meeting (encrypted). Do not use this value if the CTMS version is older than 1.9.1.

Example:

NetworkServices CTMS Encryption: Off

Page 77

Cisco TelePresence SX10 Quick Set Administrator Guide

Peripherals settings

Peripherals Pairing CiscoTouchPanels RemotePairing

In order to use Cisco Touch 10 (touch controller) as user interface for the video system, Touch 10 must be paired to the video system via the network (L AN). This is referred to as remote pairing.

Remote pairing is allowed by default; you must switch this setting Off if you want to prevent remote pairing.

Requires user role: ADMIN

Value space: <Off/On>

Off: Remote pairing of Touch 10 is not allowed. On: Remote pairing of Touch 10 is allowed.

Example:

Peripherals Pairing CiscoTouchPanels RemotePairing: On

Peripherals Profile TouchPanels

Set the number of touch panels that are expected to be connected to the video system. This information is used by the video system’s diagnostics service. If the number of connected touch panels does not match this setting, the diagnostics service will report it as an inconsistency. Note that only one Cisco Touch controller is suppor ted in this version.

Requires user role: ADMIN

Value space: <No tS e t/M ini m um1/ 0/1/ 2/3/4/ 5>

NotSet: No touch panel check is per formed. Minimum1: At least one touch panel should be connected to the video system. 0-5: This number of Touch controllers should be connected to the video system.

Example:

Peripherals Profile TouchPanels: NotSet

Page 78

Cisco TelePresence SX10 Quick Set Administrator Guide

Phonebook settings

Phonebook Server [1..1] ID

Enter a name for the external phone book.

Requires user role: ADMIN

Value space: <S: 0, 64>

Format: String with a maximum of 64 characters.

Example:

Phonebook Server 1 ID: ""

Phonebook Server [1..1] Type

Select the phonebook server type.

Requires user role: ADMIN

Value space: <VCS/TMS/Callway/CUCM>

VCS: Select VCS if the phonebook is located on the Cisco TelePresence Video Communication Server.

TMS: Select TMS if the phonebook is located on the Cisco TelePresence Management Suite server.

Callway: Select Callway if the phonebook is to be provided by the WebEx TelePresence subscription service (formerly called CallWay). Contact your WebEx TelePresence provider for more information.

CUCM: Select CUCM if the phonebook is located on the Cisco Unified Communications Manager.

Example:

Phonebook Server 1 Type: TMS

Phonebook Server [1..1] URL

Enter the addres s (URL) to the external phone book server.

Requires user role: ADMIN

Value space: <S: 0, 255>

Format: String with a maximum of 255 characters.

Example:

Phonebook Server 1 URL: "http://tms.company.com/tms/public/external/

phonebook/phonebookservice.asmx"

Page 79

Cisco TelePresence SX10 Quick Set Administrator Guide

Provisioning settings

Provisioning Connectivity

This setting controls how the device discovers whether it should request an internal or external configuration from the provisioning server.

Requires user role: ADMIN

Value space: <Internal/External/Auto>

Internal: Request internal configuration. External: Request external configuration. Auto: Automatically discover using NAPTR queries whether internal or external configurations

should be requested. If the NAPTR responses have the "e" flag, external configurations will be requested. Otherwise internal configurations will be requested.

Example:

Provisioning Connectivity: Auto

Provisioning Mode

It is possible to configure a video system using a provisioning system (external manager). This allows video conferencing network administrators to manage many video systems simultaneously. With this setting you choose which type of provisioning system to use. Provisioning can also be switched off. Contact your provisioning system provider/representative for more information.

Requires user role: ADMIN

Value space: <Off/TMS/VCS/CallWay/CUCM/Auto/Edge>

Off: The video system will not be configured by a provisioning system. Auto: The provisioning server will automatically be selected by the video system. TMS: The video system will be configured using TMS (Cisco TelePresence Management

System). VCS: The video system will be configured using VCS (Cisco TelePresence Video

Communication Server). Callway: The video system will be configured using the WebEx TelePresence subscription

service (formerly named Callway). CUCM: The video system will be configured using CUCM (Cisco Unified Communications

Manager). Edge: The system will connect to CUCM via the C ollaboration Edge infrastructure.

Example:

Provisioning Mode: Auto

Provisioning LoginName

This is the user name part of the credentials used to authenticate the video system with the provisioning server. This setting must be used when required by the provisioning server. If Provisioning Mode is Callway (WebEx TelePresence), enter the video number.

Requires user role: ADMIN

Value space: <S: 0, 80>

Format: String with a maximum of 80 characters.

Example:

Provisioning LoginName: ""

Provisioning Password

This is the password part of the credentials used to authenticate the video system with the provisioning server. This setting must be used when required by the provisioning server. If Provisioning Mode is Callway (WebEx TelePresence), enter the activation code.

Requires user role: ADMIN

Value space: <S: 0, 64>

Format: String with a maximum of 64 characters.

Example:

Provisioning Password: ""

Provisioning HttpMethod

Select the HTTP method to be used for the provisioning.

Requires user role: ADMIN

Value space: <GET/ P O ST>

GE T: Select GET when the provisioning ser ver suppor ts GET. POS T: Select POST when the provisioning ser ver suppor ts POST.

Example:

Provisioning HttpMethod: POST

Page 80

Cisco TelePresence SX10 Quick Set Administrator Guide

Provisioning ExternalManager Address

Enter the IP Address or DNS name of the external manager / provisioning system. If an External Manager Address (and Path) is configured, the system will send a message to this

address when starting up. When receiving this mes sage the exter nal manager / provisioning system can retur n configurations/commands to the unit as a result.

When using CUCM or TMS provisioning, the DHCP server can be set up to provide the external manager address automatically (DHCP Option 242 for TMS, and DHCP Option 150 for CUCM). An address set in the Provisioning ExternalManager Address setting will overr ide the address provided by DHCP.

Requires user role: ADMIN

Value space: <S: 0, 64>

Format: A valid IPv4 address, IPv6 address or DNS name.

Example:

Provisioning ExternalManager Address: ""

Provisioning ExternalManager AlternateAddress

Only applicable when the endpoint is provisioned by Cisco Unified Communication Manager (CUCM) and an alternate CUCM is available for redundancy. Enter the address of the alternate CUCM. If the main CUCM is not available, the endpoint will be provisioned by the alternate CUCM. When the main CUCM is available again, the endpoint will be provisioned by this CUCM.

Requires user role: ADMIN

Value space: <S: 0, 64>

Format: A valid IPv4 address, IPv6 address or DNS name.

Example:

Provisioning ExternalManager AlternateAdd ress: ""

Provisioning ExternalManager Protocol

Determine whether to use secure management or not.

Requires user role: ADMIN

Value space: <HTTP/HTTPS>

HTTP: Set to HTTP to disable secure management. Requires HTTP to be enabled in the NetworkServices HTTP Mode setting.

HTTPS: Set to HTTPS to enable secure management. Requires HTTPS to be enabled in the NetworkServices HTTPS Mode setting.

Example:

Provisioning ExternalManager Protocol: HTTP

Provisioning ExternalManager Path

Set the Path to the external manager / provisioning system. This setting is required when several management services reside on the same ser ver, i.e. share the same External Manager address.

Requires user role: ADMIN

Value space: <S: 0, 255>

Format: String with a maximum of 255 characters.

Example:

Provisioning ExternalManager Path: "tms/public/external/management/

SystemManagementService.asmx"

Provisioning ExternalManager Domain

Enter the SIP domain for the VCS provisioning server.

Requires user role: ADMIN

Value space: <S: 0, 64>

Format: String with a maximum of 64 characters.

Example:

Provisioning ExternalManager Domain: "any.domain.com"

Page 81

Cisco TelePresence SX10 Quick Set Administrator Guide

RTP settings

RTP Ports Range Start

Specify the first port in the range of RTP por ts. NOTE: Restar t the system for any change to this set ting to take effect.

Requires user role: ADMIN

Value space: <1024..65438>

Range: Select a value from 1024 to 65438.

Example:

RTP Ports Range Start: 2326

RTP Ports Range Stop

Specify the last RTP port in the range. NOTE: Restar t the system for any change to this set ting to take effect.

Requires user role: ADMIN

Value space: <1120..65535>

Range: Select a value from 1120 to 65535.

Example:

RTP Ports Range Stop: 2486

Page 82

Cisco TelePresence SX10 Quick Set Administrator Guide

Security settings

Security Audit Logging Mode

Determine where to record or transmit the audit logs. The audit logs are sent to a syslog server. When using the External/ExternalSecure modes and setting the port assignment to manual in

the Security Audit Ser ver Port Assignment setting, you must also enter the address and port number for the audit server in the Security Audit Server Address and Security Audit Server Port settings.

Requires user role: AUDIT

Value space: <Off/Internal/External/ExternalSecure>

Off: No audit logging is performed. Internal: The system records the audit logs to internal logs, and rotates logs when they are

full. External: The system sends the audit logs to an external syslog server. The syslog server

must support UDP. ExternalSecure: The system sends encrypted audit logs to an external syslog server that is

verified by a certificate in the Audit CA list. The Audit CA list file must be uploaded to the codec using the web interface. The common _name parameter of a certificate in the CA list must match the IP address of the syslog ser ver, and the secure TCP ser ver must be set up to listen for secure (TLS) TCP Syslog messages.

Example:

Security Audit Logging Mode: Off

Security Audit OnError Action

Determine what happens when the connection to the syslog server is lost. This setting is only relevant when Security Audit Logging Mode is set to ExternalSecure.

Requires user role: AUDIT

Value space: <Halt/Ignore>

Halt: If a halt condition is detected the system codec is rebooted and only the auditor is allowed to operate the unit until the halt condition has passed. When the halt condition has passed the audit logs are re-spooled to the syslog server. Halt conditions are: A net work breach (no physical link), no syslog ser ver running (or incorrect address or por t to the syslog server), TLS authentication failed (if in use), local backup (re-spooling) log full.

Ignore: The system will continue its normal operation, and rotate internal logs when full. When the connection is restored it will again send its audit logs to the syslog server.

Example:

Security Audit OnError Action: Ignore

Security Audit Server Address

The audit logs are sent to a syslog server. Enter the IP address of the syslog server. Only valid IPv4 or IPv6 address formats are accepted. Host names are not supported. This setting is only relevant when Security Audit Logging Mode is set to External or ExternalSecure.

Requires user role: AUDIT

Value space: <S: 0, 64>

Format: A valid IPv4 address or IPv6 address

Example:

Security Audit Server Address: ""

Security Audit Server Port

The audit logs are sent to a syslog server. Enter the por t of the syslog server that the system shall send its audit logs to. This setting is only relevant when Security Audit Port Assignment is set to Manual.

Requires user role: AUDIT

Value space: <0..65535>

Range: Select a value from 0 to 65535.

Example:

Security Audit Server Port: 514

Security Audit Server PortAssignment

The audit logs are sent to a syslog server. You can define how the port number of the external syslog ser ver will be assigned. This setting is only relevant when Security Audit Logging Mode is set to Ex ternal or Ex ternalSecure. To see which port number is used you can check the Security Audit Ser ver Port status. Navigate to Configuration > System status on the web interface or; if on a command line interface, run the command xStatus Security Audit Server Port.

Requires user role: AUDIT

Value space: <Auto/Manual>

Auto: Will use UDP port number 514 when the Security Audit Logging Mode is set to External. Will use TCP por t number 6514 when the Securit y Audit Logging Mode is set to ExternalSecure.

Manual: Will use the por t value defined in the Security Audit Server Port setting.

Example:

Security Audit Server PortAssignment: Auto

Page 83

Cisco TelePresence SX10 Quick Set Administrator Guide

Security Session ShowLastLogon

When logging in to the system using SSH or Telnet you will see the UserId, time and date of the last session that did a successful login.

Requires user role: ADMIN

Value space: <Off/On>

On: Show information about the last session. Off: Do not show information about the last session.

Example:

Security Session ShowLastLogon: Off

Security Session InactivityTimeout

Determine how long the system will accept inactivity from the user before he is automatically logged out.

Requires user role: ADMIN

Value space: <0..10000>

Range: Select a value between 1 and 10000 seconds; or select 0 when inactivity should not enforce automatic logout.

Example:

Security Session InactivityTimeout: 0

Page 84

Cisco TelePresence SX10 Quick Set Administrator Guide

SerialPort settings

SerialPort Mode

Enable/disable the serial por t (connection via Micro USB to USB cable). The serial por t uses 115200 bps, 8 data bits, no parity and 1 stop bit.

Requires user role: ADMIN

Value space: <Off/On>

Off: Disable the serial port. On: Enable the serial port.

Example:

SerialPort Mode: On

SerialPort LoginRequired

Determine if login shall be required when connecting to the serial port.

Requires user role: ADMIN

Value space: <Off/On>

Off: The user can access the codec via the serial port without any login. On: Login is required when connecting to the codec via the serial port.

Example:

SerialPort LoginRequired: On

Page 85

Cisco TelePresence SX10 Quick Set Administrator Guide

SIP settings

SIP ANAT

ANAT (Alternative Network Address Types) enables media negotiation for multiple addresses and address types, as specified in RFC 4091.

Requires user role: ADMIN

Value space: <Off/On>

Off: Disable ANAT. On: Enable ANAT.

Example:

SIP ANAT: Off

SIP AuthenticateTransferror

Not applicable in this version.

SIP ListenPort

Turn on or off the listening for incoming connections on the SIP TCP/UDP ports. If turned off, the endpoint will only be reachable through the SIP registrar (CUCM or VCS). It is recommended to leave this setting at its default value.

Requires user role: ADMIN

Value space: <Off/On>

Off: Listening for incoming connections on the SIP TCP/UDP ports is turned off. On: Listening for incoming connections on the SIP TCP/UDP ports is turned on.

Example:

SIP ListenPort: On

SIP PreferredIPMedia

Define the preferred IP version for sending and receiving media (audio, video, data). Only applicable when both Net work IPStack and Conference CallProtocolIPStack are set to Dual, and the network does not have a mechanism for choosing the prefer red IP version.

Requires user role: ADMIN

Value space: <IPv4/IPv6>

IPv4: The preferred IP version for media is IPv4. IPv6: The preferred IP version for media is IPv6.

Example:

SIP Preferred IPM ed ia: IP v4

SIP PreferredIPSignaling

Define the preferred IP version for signaling (audio, video, data). Only applicable when both Network IPStack and Conference CallProtocolIPStack are set to Dual, and the network does not have a mechanism for choosing the preferred IP version. It also determines the priorit y of the A/AA AA lookups in DNS, so that the preferred IP version is used for registration.

Requires user role: ADMIN

Value space: <IPv4/IPv6>

IPv4: The preferred IP version for signaling is IPv4. IPv6: The preferred IP version for signaling is IPv6.

Example:

SIP Preferred IPSignalin g: IPv4

SIP OCSP Mode

Not applicable in this version.

SIP OCSP DefaultResponder

Not applicable in this version.

Page 86

Cisco TelePresence SX10 Quick Set Administrator Guide

SIP Profile [1..1] Ice Mode

ICE (Interactive Connectivity Establishment, RFC 5245) is a NAT traversal solution that the endpoints can use to discover the optimized media path. Thus the shortest route for audio and video is always secured between the endpoints. NOTE: ICE is not supported when registered to CUCM (Cisco Unified Communication Manager).

Requires user role: ADMIN

Value space: <Auto/Off/On>

Auto: When set to Auto, ICE will be enabled if a turn server is provided, other wise ICE will be disabled.

Off: Set to Of f to disable ICE. On: Set to On to enable ICE.

Example:

SIP Profile 1 Ice Mode: Auto

SIP Profile [1..1] Ice DefaultCandidate

This is the default IP address that the endpoint will receive media on until ICE has reached a conclusion about which media route to use (up to the first 5 seconds of a call.

Requires user role: ADMIN

Value space: <Host/Rflx /Relay>

Host: The endpoint will receive media on its own IP address. Rflx: The endpoint will receive media on its public IP address as seen by the TURN ser ver. Relay: The endpoint will receive media on the IP address and port allocated on the T URN

server, and is used as a fallback until ICE has concluded.

Example:

SIP Profile 1 Ice DefaultCandidate: Host

SIP Profile [1..1] Turn DiscoverMode

Set the discover mode to enable/disable the application to search for available Turn servers in DNS. Before making calls, the system will test if port allocation is possible.

Requires user role: ADMIN

Value space: <Off/On>

Off: Set to Of f to disable discovery mode. On: When set to On, the system will search for available Turn servers in DNS, and before

making calls the system will test if port allocation is possible.

Example:

SIP Profile Turn DiscoverMode: On

SIP Profile [1..1] Turn BandwidthProbe

Not applicable in this version.

SIP Profile [1..1] Turn DropRflx

DropRflx will make the endpoint force media through the Turn relay, unless the remote endpoint is on the same network.

Requires user role: ADMIN

Value space: <Off/On>

Off: Disable DropRflx. On: The system will force media through the Turn relay when the remote endpoint is on

another network.

Example:

SIP Profile Turn DropRflx: Off

SIP Profile [1..1] Turn Server

This is the address of the TURN (Traversal Using Relay NAT) server that the endpoints will use. It is used as a media relay fallback and it is also used to discover the endpoint’s own public IP address.

Requires user role: ADMIN

Value space: <S: 0, 255>

Format: The preferred format is DNS SRV record (e.g. _turn._udp.<domain>), or it can be a valid IPv4 or IP v6 address.

Example:

SIP Profile 1 Turn Server: " _ turn. _ udp.example.com"

SIP Profile [1..1] Turn UserName

The user name needed for accessing the TURN server.

Requires user role: ADMIN

Value space: <S: 0, 128>

Format: String with a maximum of 128 characters.

Example:

SIP Profile 1 Turn UserName: ""

Page 87

Cisco TelePresence SX10 Quick Set Administrator Guide

SIP Profile [1..1] Turn Password

The password needed for accessing the TURN ser ver.

Requires user role: ADMIN

Value space: <S: 0, 128>

Format: String with a maximum of 128 characters.

Example:

SIP Profile 1 Turn Password: ""

SIP Profile [1..1] URI

The SIP URI (Uniform Resource Identifier) is the address that is used to identify the video system. The UR I is registered and used by the SIP services to route inbound calls to the system. The SIP URI syntax is defined in RFC 3261.

Requires user role: ADMIN

Value space: <S: 0, 255>

Format: String with maximum 255 characters and compliant with the SIP URI syntax.

Example:

SIP Profile 1 URI: "sip:firstname.lastna me@company.com"

SIP Profile [1..1] DisplayName

When configured the incoming call will report the DisplayName instead of the SIP URI.

Requires user role: ADMIN

Value space: <S: 0, 255>

Format: String with a maximum of 255 characters.

Example:

SIP Profile 1 DisplayName: ""

SIP Profile [1..1] Authentication [1..1] LoginName

This is the user name part of the credentials used to authenticate towards the SIP proxy.

Requires user role: ADMIN

Value space: <S: 0, 128>

Format: String with a maximum of 128 characters.

Example:

SIP Profile 1 Authentication 1 LoginName: ""

SIP Profile [1..1] Authentication [1..1] Password

This is the password part of the credentials used to authenticate towards the SIP proxy.

Requires user role: ADMIN

Value space: <S: 0, 128>

Format: String with a maximum of 128 characters.

Example:

SIP Profile 1 Authentication 1 Password: ""

SIP Profile [1..1] DefaultTransport

Select the transport protocol to be used over the LAN.

Requires user role: ADMIN

Value space: <T CP/UDP/T ls/Aut o>

TCP: The system will always use TCP as the default transpor t method. UDP: The system will always use UDP as the default transport method. Tls: The system will always use TLS as the default transport method. For TLS connections

a SIP CA-list can be uploaded to the video system. If no such CA-list is available on the system then anonymous Dif fie Hellman will be used.

Auto: The system will try to connect using transpor t protocols in the following order: TLS, TC P, U D P.

Example:

SIP Profile 1 DefaultTransport: Auto

SIP Profile [1..1] TlsVerify

For TLS connections a SIP CA-list can be uploaded to the video system. This can be done from the web interface.

Requires user role: ADMIN

Value space: <Off/On>

Off: Set to Of f to allow TLS connections without verif ying them. The TLS connections are allowed to be set up without verifying the x.509 certificate received from the server against the local CA-list. This should typically be selected if no SIP CA-list has been uploaded.

On: Set to On to verify TLS connections. Only TLS connections to ser vers, whose x.509 certif icate is validated against the CA-list, will be allowed.

Example:

SIP Profile 1 TlsVerify: Off

Page 88

Cisco TelePresence SX10 Quick Set Administrator Guide

SIP Profile [1..1] Outbound

Turn on or off the client initiated connections mechanism for firewall traversal, connection reuse and redundancy. The current version suppor ts RFC 5626.

Requires user role: ADMIN

Value space: <Off/On>

Off: Connect to the single proxy configured first in Proxy Address list. On: Set up multiple outbound connections to ser vers in the Prox y Address list.

Example:

SIP Profile 1 Outbound: Off

SIP Profile [1..1] Proxy [1..4] Address

The Proxy Address is the manually configured address for the outbound proxy. It is possible to use a fully qualified domain name, or an IP address. The default port is 5060 for TCP and UDP but another one can be provided. If SIP Profile Outbound is enabled, multiple proxies can be addressed.

Requires user role: ADMIN

Value space: <S: 0, 255>

Format: A valid IPv4 address, IPv6 address or DNS name.

Example:

SIP Profile 1 Proxy 1 Address: ""

SIP Profile [1..1] Proxy [1..4] Discovery

Select if the SIP Proxy address is to be obtained manually or by using Dynamic Host Configuration Protocol (DHCP).

Requires user role: ADMIN

Value space: <Auto/Manual>

Auto: When Auto is selected, the SIP Proxy address is obtained using Dynamic Host Configuration Protocol (DHCP).

Manual: When Manual is selected, the manually configured SIP Proxy address will be used.

Example:

SIP Profile 1 Proxy 1 Discovery: Manual

SIP Profile [1..1] Type

Enables SIP extensions and special behavior for a vendor or provider.

Requires user role: ADMIN

Value space: <Standard/Cisco>

Standard: Use this when register ing to standard SIP Proxy (tested with Cisco TelePresence VCS and Broadsoft)

Cisco: Use this when registering to Cisco Unified Communication Manager.

Example:

SIP Profile 1 Type: Standard

SIP Profile [1..1] Mailbox

When registered to a Cisco Unified Communications Manager (CUCM) you may be of fered the option of having a private voice mailbox. Enter the number (address) of the mailbox in this setting, or leave the string empty if you do not have a voice mailbox.

Requires user role: ADMIN

Value space: <S: 0, 255>>

Format: String with a maximum of 255 characters.

Example:

SIP Profile 1 Mailbox: "12345678"

SIP Profile [1..1] Line

This value is f ixed and cannot be changed.

Requires user role: ADMIN

Value space: <Private>

Range: This value is fixed and cannot be changed.

Example:

SIP Profile 1 Line: Private

Page 89

Cisco TelePresence SX10 Quick Set Administrator Guide

Standby settings

Standby Control

Determine whether the system should go into standby mode or not.

Requires user role: ADMIN

Value space: <Off/On>

Off: The system will not enter standby mode. On: Enter standby mode when the Standby Delay has timed out. Requires the Standby Delay

to be set to an appropriate value.

Example:

Standby Control: On

Standby Delay

Define how long (in minutes) the system shall be in idle mode before it goes into standby mode. Requires the Standby Control to be enabled.

Requires user role: ADMIN

Value space: <1..48 0>

Range: Select a value from 1 to 480 minutes.

Example:

Standby Delay: 10

Standby BootAction

Define the camera position after a restart of the codec.

Requires user role: ADMIN

Value space: <None/Preset1/Preset2/Preset3/Preset4/Preset5/Preset6/Preset7/Preset8/

Preset9/Preset10/Preset11/Preset12/Preset13/Preset14/Preset15/RestoreCameraPosition/ DefaultCameraPosition>

None: No action. Preset1 to Preset15: After a reboot the camera position will be set to the position defined by

the selected preset. RestoreCameraPosition: After a reboot the camera position will be set to the position it had

before the last boot. DefaultCameraPosition: After a reboot the camera position will be set to the factory default

position.

Example:

Stand by Boot Action: DefaultCa meraPosition

Standby StandbyAction

Define the camera position when going into standby mode.

Requires user role: ADMIN

Value space: <None/PrivacyPosition>

None: No action. PrivacyPosition: Turns the camera to a sideways position for privacy.

Example:

Standby StandbyAction: PrivacyPosition

Standby WakeupAction

Define the camera position when leaving standby mode.

Requires user role: ADMIN

Value space: <None/Preset1/Preset2/Preset3/Preset4/Preset5/Preset6/Preset7/Preset8/

Preset9/Preset10/Preset11/Preset12/Preset13/Preset14/Preset15/RestoreCameraPosition/ DefaultCameraPosition>

None: No action. Preset1 to Preset15: When leaving standby the camera position will be set to the position

defined by the selected preset. RestoreCameraPosition: When leaving standby the camera position will be set to the position

it had before entering standby. DefaultCameraPosition: When leaving standby the camera position will be set to the factory

default position.

Example:

Standby WakeupAction: RestoreCameraPosition

Page 90

Cisco TelePresence SX10 Quick Set Administrator Guide

SystemUnit settings

SystemUnit Name

Enter a System Name to define a name of the system unit. The system name will be displayed:

1) When the codec is acting as an SNMP Agent.

2) Towards a DHCP server.

Requires user role: ADMIN

Value space: <S: 0, 50>

Format: String with a maximum of 50 characters.

Example:

SystemUnit Name: "Meeting Room"

SystemUnit MenuLanguage

This has been replaced with the UserInterface Language setting.

SystemUnit CallLogging Mode

Set the call logging mode for calls that are received or placed by the system. The call logs may then be viewed via the web interface.

Requires user role: ADMIN

Value space: <Off/On>

Off: Disable logging. On: Enable logging.

Example:

SystemUnit CallLogging Mode: On

SystemUnit ContactInfo Type

Choose which type of contact information to show in the status field in the upper left corner of the display and Touch controller.

Requires user role: ADMIN

Value space: <Auto/None/IPv4/IPv6/SipUri/SystemName/DisplayName>

Auto: Show the address which another system can dial to reach this system. The address depends on the system registration.

None: Do not show any contact information in the status field. IPv4: Show the IPv4 address as contact information. IPv6: Show the IPv6 address as contact information. SipUri: Show the SIP URI as contact information (see the SIP Profile [1..1] URI setting). SystemName: Show the system name as contact information (see the SystemUnit Name

set ti ng). DisplayName: Show the display name as contact information (see the SIP Profile [1..1]

DisplayName setting).

Example:

SystemUnit ContactInfo Type: Auto

Page 91

Cisco TelePresence SX10 Quick Set Administrator Guide

Time settings

Time TimeFormat

Set the time format.

Requires user role: USER

Value space: <24H/12H>

24H: Set the time format to 24 hours. 12H : Set the time format to 12 hours (AM/PM).

Example:

Time TimeFor mat: 24H

Time DateFormat

Set the date format.

Requires user role: USER

Value space: <DD_MM_YY/MM_DD_Y Y/YY_MM_DD>

DD _MM _Y Y: The date January 30th 2010 will be displayed: 30.01.10 MM _ DD_Y Y: The date January 30th 2010 will be displayed: 01.30.10 YY_MM_DD: The date January 30 th 2010 will be displayed: 10.01.30

Example:

Tim e DateFor mat: DD _ M M _ YY

Time Zone

This has been replaced with the Time OlsonZone setting as of software version TC7.2.

Page 92

Cisco TelePresence SX10 Quick Set Administrator Guide

Time OlsonZone

Set the time zone for the geographical location of the video system. The information in the value space is from the tz database, also called the IANA Time Zone Database.

Requires user role: USER

Value space: <Africa/Abidjan, Africa/Accra, Africa/Addis_Ababa, Africa/Algiers, Africa/Asmara,

Africa/Asmera, Africa/Bamako, Africa/Bangui, Africa/Banjul, Africa/Bissau, Africa/Blantyre, Africa/Brazzaville, Africa/Bujumbura, Africa/Cairo, Africa/Casablanca, Africa/Ceuta, Africa/ Conakry, Africa/Dakar, Africa/Dar_es_Salaam, Africa/Djibouti, Africa/Douala, Africa/El_Aaiun, Africa/Freetown, Africa/Gaborone, Africa/Harare, Africa/Johannesburg, Africa/Juba, Africa/ Kampala, Africa/Khartoum, Africa/Kigali, Africa/Kinshasa, Africa/Lagos, Africa/Libreville, Africa/ Lome, Africa/Luanda, Africa/Lubumbashi, Africa/Lusaka, Africa/Malabo, Africa/Maputo, Africa/ Maseru, Africa/Mbabane, Africa/Mogadishu, Africa/Monrovia, Africa/Nairobi, Africa/Ndjamena, Africa/Niamey, Africa/Nouakchott, Africa/Ouagadougou, Africa/Porto-Novo, Africa/Sao_Tome, Africa/Timbuktu, Africa/Tripoli, Africa/Tunis, Africa/Windhoek, America/Adak, America/ Anchorage, America/Anguilla, America/Antigua, America/Araguaina, America/Argentina/ Buenos_Aires, America/Argentina/Catamarca, America/Argentina/ComodRivadavia, America/ Argentina/Cordoba, America/Argentina/Jujuy, America/Argentina/La_Rioja, America/Argentina/ Mendoza, America/Argentina/Rio_Gallegos, America/Argentina/Salta, America/Argentina/San_ Juan, America/Argentina/San_Luis, America/Argentina/Tucuman, America/Argentina/Ushuaia, America/Aruba, America/Asuncion, America/Atikokan, America/Atka, America/Bahia, America/ Bahia_Banderas, America/Barbados, America/Belem, America/Belize, America/Blanc-Sablon, America/Boa_Vista, America/Bogota, America/Boise, America/Buenos_Aires, America/ Cambridge_Bay, America/Campo_Grande, America/Cancun, America/Caracas, America/ Catamarca, America/Cayenne, America/Cayman, America/Chicago, America/Chihuahua, America/Coral_Harbour, America/Cordoba, America/Costa_Rica, America/Creston, America/ Cuiaba, America/Curacao, America/Danmarkshavn, America/Dawson, America/Dawson_Creek, America/Denver, America/Detroit, America/Dominica, America/Edmonton, America/Eirunepe, America/El_Salvador, America/Ensenada, America/Fort_Wayne, America/Fortaleza, America/ Glace_Bay, America/Godthab, America/Goose_Bay, America/Grand_Turk, America/Grenada, America/Guadeloupe, America/Guatemala, America/Guayaquil, America/Guyana, America/ Halifax, America/Havana, America/Hermosillo, America/Indiana/Indianapolis, America/Indiana/ Knox, America/Indiana/Marengo, America/Indiana/Petersburg, America/Indiana/Tell_City, America/Indiana/Vevay, America/Indiana/Vincennes, America/Indiana/Winamac, America/ Indianapolis, America/Inuvik, America/Iqaluit, America/Jamaica, America/Jujuy, America/ Juneau, America/Kentucky/Louisville, America/Kentucky/Monticello, America/Knox_IN, America/Kralendijk, America/La_Paz, America/Lima, America/Los_ Angeles, America/Louisville, America/Lower_Princes, America/Maceio, America/Managua, America/Manaus, America/ Marigot, America/Martinique, America/Matamoros, America/Mazatlan, America/Mendoza, America/Menominee, America/Merida, America/Metlakatla, America/Mexico_City, America/ Miquelon, America/Moncton, America/Monterrey, America/Montevideo, America/Montreal, America/Montserrat, America/Nassau, America/New_York, America/Nipigon, America/Nome, America/Noronha, America/North_Dakota/Beulah, America/Nor th_Dakota/Center, America/ North_Dakota/New_Salem, America/Ojinaga, America/Panama, America/Pangnirtung, America/ Paramaribo, America/Phoenix, America/Port-au-Prince, America/Port_of_Spain, America/

Porto_Acre, America/Porto_Velho, America/Puerto_Rico, America/Rainy_River, America/ Rankin_Inlet, America/Recife, America/Regina, America/Resolute, America/Rio_Branco, America/Rosario, America/Santa_Isabel, America/Santarem, America/Santiago, America/ Santo_Domingo, America/Sao_Paulo, America/Scoresbysund, America/Shiprock, America/ Sitka, America/St_Barthelemy, America/St_Johns, America/St_Kitts, America/St_Lucia, America/St_Thomas, America/St_Vincent, America/Swift_Current, America/Tegucigalpa, America/Thule, America/Thunder_Bay, America/Tijuana, America/ Toronto, America/Tortola, America/Vancouver, America/Virgin, America/Whitehorse, America/Winnipeg, America/Yakutat, America/Yellowknife, Antarctica/Casey, Antarctica/Davis, Antarctica/DumontDUrville, Antarctica/ Macquarie, Antarctica/Mawson, Antarctica/McMurdo, Antarctica/Palmer, Antarctica/Rothera, Antarctica/South_Pole, Antarctica/Syowa, Antarctica/Vostok, Arctic/Longyearbyen, Asia/Aden, Asia/Almaty, Asia/Amman, Asia/Anadyr, Asia/Aqtau, Asia/Aqtobe, Asia/Ashgabat, Asia/ Ashkhabad, Asia/Baghdad, Asia/Bahrain, Asia/Baku, Asia/Bangkok, Asia/Beirut, Asia/Bishkek, Asia/Brunei, Asia/Calcutta, Asia/Choibalsan, Asia/Chongqing, Asia/Chungking, Asia/Colombo, Asia/Dacca, Asia/Damascus, Asia/Dhaka, Asia/Dili, Asia/Dubai, Asia/Dushanbe, Asia/Gaza, Asia/ Harbin, Asia/Hebron, Asia/Ho_Chi_Minh, Asia/Hong_Kong, Asia/Hovd, Asia/Irkutsk, Asia/ Istanbul, Asia/Jakarta, Asia/Jayapura, Asia/Jerusalem, Asia/Kabul, Asia/Kamchatka, Asia/ Karachi, Asia/Kashgar, Asia/Kathmandu, Asia/Katmandu, Asia/Khandyga, Asia/Kolkata, Asia/ Krasnoyarsk, Asia/Kuala_Lumpur, Asia/Kuching, Asia/Kuwait, Asia/Macao, Asia/Macau, Asia/ Magadan, Asia/Makassar, Asia/Manila, Asia/Muscat, Asia/Nicosia, Asia/Novokuznetsk, Asia/ Novosibirsk, Asia/Omsk, Asia/Oral, Asia/Phnom_Penh, Asia/Pontianak, Asia/Pyongyang, Asia/ Qatar, Asia/Qyzylorda, Asia/Rangoon, Asia/Riyadh, Asia/Saigon, Asia/Sakhalin, Asia/Samarkand, Asia/Seoul, Asia/Shanghai, Asia/Singapore, Asia/Taipei, Asia/Tashkent, Asia/Tbilisi, Asia/Tehran, Asia/Tel_Aviv, Asia/Thimbu, Asia/Thimphu, Asia/Tokyo, Asia/Ujung_Pandang, Asia/Ulaanbaatar, Asia/Ulan_Bator, Asia/Urumqi, Asia/Ust-Nera, Asia/Vientiane, Asia/Vladivostok, Asia/Yakutsk, Asia/Yekaterinburg, Asia/Yerevan, Atlantic/Azores, Atlantic/Bermuda, Atlantic/Canary, Atlantic/ Cape_Verde, Atlantic/Faeroe, Atlantic/Faroe, Atlantic/Jan_Mayen, Atlantic/Madeira, Atlantic/ Reykjavik, Atlantic/South_Georgia, Atlantic/St_Helena, Atlantic/Stanley, Australia/ACT, Australia/ Adelaide, Australia/Brisbane, Australia/Broken_Hill, Australia/Canberra, Australia/Currie, Australia/Darwin, Australia/Eucla, Australia/Hobart, Australia/LHI, Australia/Lindeman, Australia/ Lord_Howe, Australia/Melbourne, Australia/NSW, Australia/North, Australia/Perth, Australia/ Queensland, Australia/South, Australia/Sydney, Australia/Tasmania, Australia/Victoria, Australia/ West, Australia/Yancowinna, Brazil/Acre, Brazil/DeNoronha, Brazil/East, Brazil/West, CET, CST6CDT, Canada/Atlantic, Canada/Central, Canada/East-Saskatchewan, Canada/Eastern, Canada/Mountain, Canada/Newfoundland, Canada/Pacific, Canada/Saskatchewan, Canada/ Yukon, Chile/Continental, Chile/EasterIsland, Cuba, EE T, EST, EST5EDT, Egypt, Eire, Etc/GMT, Etc/GMT+0, Etc/GMT+1, Etc/GMT+10, Etc/GMT+11, Etc/GMT+12, Etc/GMT+2, Etc/GMT+3, Etc/ GMT+4, Etc/GMT+5, Etc/GMT+6, Etc/GMT+7, Etc/GMT+8, Etc/GMT+9, Etc/GMT-0, Etc/GMT-1, Etc/GMT-10, Etc/GMT-11, Etc/GMT-12, Etc/GMT-13, Etc/GMT-14, Etc/GMT-2, Etc/GMT-3, Etc/ GMT-4, Etc/GMT-5, Etc/GMT-6, Etc/GMT-7, Etc/GMT-8, Etc/GMT-9, Etc/GMT0, Etc/Greenwich, Etc/UCT, Etc/UTC, Etc/Universal, Etc/Zulu, Europ e/Amsterd am, Europe/Andorra, Europ e/Athens, Europe/Belfast, Europe/Belgrade, Europe/Berlin, Europe/Bratislava, Europe/Brussels, Europe/ Bucharest, Europe/Budapest, Europe/Busingen, Europe/Chisinau, Europe/Copenhagen, Europe/ Dublin, Europe/Gibraltar, Europe/Guernsey, Europe/Helsinki, Europe/Isle_of_Man, Europe/ Istanbul, Europe/Jersey, Europe/Kaliningrad, Europe/Kiev, Europe/Lisbon, Europe/Ljubljana, Europe/London, Europe/Luxembourg, Europe/Madrid, Europe/Malta, Europe/Mariehamn,

Page 93

Cisco TelePresence SX10 Quick Set Administrator Guide

Europe/Minsk, Europe/Monaco, Europe/Moscow, Europe/Nicosia, Europe/Oslo, Europe/Paris, Europe/Podgorica, Europe/Prague, Europe/Riga, Europe/Rome, Europe/Samara, Europe/ San_Marino, Europe/Sarajevo, Europe/Simferopol, Europe/Skopje, Europe/Sofia, Europe/ Stockholm, Europe/Tallinn, Europe/Tirane, Europe/Tiraspol, Europe/Uzhgorod, Europe/Vaduz, Europe/Vatican, Europe/Vienna, Europe/Vilnius, Europe/Volgograd, Europe/Warsaw, Europe/ Zagreb, Europe/Zaporozhye, Europe/Zurich, GB, GB-Eire, GMT, GMT+0, GMT-0, GMT0, Greenwich, HST, Hongkong, Iceland, Indian/Antananarivo, Indian/Chagos, Indian/Christmas, Indian/Cocos, Indian/Comoro, Indian/Kerguelen, Indian/Mahe, Indian/Maldives, Indian/Mauritius, Indian/Mayotte, Indian/Reunion, Iran, Israel, Jamaica, Japan, Kwajalein, Libya, MET, MST, MST7MDT, Mexico/BajaNor te, Mexico/BajaSur, Mexico/General, NZ, NZ-CHAT, Navajo, PRC, PST8PDT, Pacific/Apia, Pacific/Auckland, Pacific/Chatham, Pacific/Chuuk, Pacific/Easter, Pacific/Efate, Pacific/Enderbury, Pacific/Fakaofo, Pacific/Fiji, Pacific/Funafuti, Pacific/Galapagos, Pacific/Gambier, Pacific/Guadalcanal, Pacific/Guam, Pacific/Honolulu, Pacific/Johnston, Pacific/ Kiritimati, Pacific/Kosrae, Pacific/Kwajalein, Pacific/Majuro, Pacific/Marquesas, Pacific/Midway, Pacific/Nauru, Pacific/Niue, Pacific/Norfolk, Pacific/Noumea, Pacific/Pago_Pago, Pacific/Palau, Pacific/Pitcairn, Pacific/Pohnpei, Pacific/Ponape, Pacific/Port_Moresby, Pacific/Rarotonga, Pacific/Saipan, Pacific/Samoa, Pacific/Tahiti, Pacific/Tarawa, Pacific/Tongatapu, Pacific/Truk, Pacific/Wake, Pacific/Wallis, Pacific/Yap, Poland, Portugal, ROC, ROK, Singapore, Turkey, UCT, US/Alaska, US/Aleutian, US/Arizona, US/Central, US/East-Indiana, US/Eastern, US/Hawaii, US/ Indiana-Starke, US/Michigan, US/Mountain, US/Pacific, US/Pacific-New, US/Samoa, UTC, Universal, W-SU, WET, Zulu>

Range: Select a time zone from the list.

Example:

Range: Select a time zone from the list time zones.

Page 94

Cisco TelePresence SX10 Quick Set Administrator Guide

UserInterface settings

UserInterface Language

Select the language to be used in menus and messages on the screen and Touch controller. The default language is English.

Requires user role: USER

Value space: <English/ChineseSimplified/ChineseTraditional/Catalan/Czech/Danish/

Dutch/Finnish/French/German/Hungarian/Italian/Japanese/Korean/Norwegian/Polish/ PortugueseBrazilian/Russian/Spanish/Swedish/Turkish>

Range: Select a language from the list.

Example:

UserInterface Language: English

UserInterface OSD EncryptionIndicator

Define for how long the encr yption indicator (a padlock) will be shown on screen. The setting applies to both encrypted and non-encrypted calls, i.e. both to secure and non-secure conferences. The icon for encr ypted calls is a locked padlock, and the icon for non-encrypted calls is a crossed out locked padlock.

Requires user role: ADMIN

Value space: <Auto/Alway sO n/Alwa ysOf f>

Auto: If the Conference Encr yption Mode setting is set to BestEffort and the call is encrypted, the encryption indicator is shown during the first seconds of a call. If the Conference Encryption M ode setting is set to BestEffort and the call is non-encr ypted, the crossed out encryption indicator is shown during the entire call. If the Conference Encryption Mode setting is NOT set to BestEf fort, the encryption indicator is not shown at all.

AlwaysOn: The encryption indicator is displayed on screen during the entire call. This applies to both encrypted and non-encr ypted calls for all Conference Encryption Mode settings.

AlwaysOff: The encr yption indicator is never displayed on screen. This applies to both encrypted and non-encrypted calls for all Conference Encryption Mode settings.

Example:

UserInterface OSD EncryptionInd icator: Auto

UserInterface OSD LanguageSelection

Not applicable in this version.

UserInterface OSD LoginRequired

Determine if the system should require the user to login before accessing the menus on screen. If enabled, the user must enter his username and his PIN code. Af ter the user has logged in he can only execute to the configurations changes and commands allowed by his role. The OSD (On Screen Display) is where you find the menus, dialogs, icons and indicators, and the navigation is done with a remote control.

NOTE: The PIN code must be set before enabling this setting, this is done from a web interface. Login to the system from a web browser, navigate to Configuration > User Administration, select the user and add the PIN code.

Requires user role: ADMIN

Value space: <Off/On>

Off: No login to the menus on screen (OSD) is required. On: The user must log in to access the menus on screen (OSD).

Example:

UserInterface OSD LoginRequired: Off

UserInterface OSD Output

Define on which monitor the on-screen menus, information and icons should be displayed. The system supports only one monitor, so this value is fixed and cannot be changed.

Requires user role: ADMIN

Value space: <1>

UserInterface Wallpaper

Select a background image (wallpaper) for the video screen when idle. You may upload a custom wallpaper to the video system using the web interface. The following

file formats are suppor ted: BMP, GIF, JPEG, PNG. The maximum file size is 2 MByte.

Requires user role: USER

Value space: <None/Custom>

None: There is no background image on the screen. Custom: Use the custom wallpaper as background image on the screen. If no custom

wallpaper is uploaded to the system, the setting will rever t to the default value.

Example:

UserInterface Wallpaper: None

Page 95

Cisco TelePresence SX10 Quick Set Administrator Guide

UserInterface TouchPanel DefaultPanel

Define what (contact list, meeting list, or dial pad) the Touch controller will display on wake up.

Requires user role: USER

Value space: <None/LastUsed/ContactList/MeetingList/Dialpad>

None: None of the below options will appear as default on the Touch controller. LastUsed: The last used (contact list, meeting list, or dial pad) will appear as default on the

Touch controller. ContactList: The contact list (favorites, directory and history) will appear as default on the

Touch controller.

MeetingList: The list of scheduled meetings will appear as default on the Touch controller. DialPad: The dial pad will appear as default on the Touch controller.

Example:

UserInterface TouchPanel DefaultPanel: None

UserInterface UserPreferences

Some user preferences (ringtone, volume, language, date and time, etc) can be made available from the Settings menu, or from the Settings > Administrator menu on the Touch controller. Accessing the Administrator menus requires that the user has admin privileges.

Requires user role: ADMIN

Value space: <Off/On>

Off: The user preferences are available from the Settings > Administrator menu on the Touch controller, for users with admin privileges.

On: The user preferences are available from the Settings menu on the Touch controller.

Example:

UserInterface UserPreferences: On

Page 96

Cisco TelePresence SX10 Quick Set Administrator Guide

Video settings

Video AllowWebSnapshots

Allow or disallow snapshots being taken of the local input sources, remote sites and presentation channel. If snapshots are allowed, the web inter face Call Control page will show them both when idle and in a call.

Snapshots are not allowed by default; you must switch this setting On if you want to allow snapshots being taken.

Requires user role: ADMIN

Value space: <Off/On>

Off: Capturing web snapshots is not allowed. On: Web snapshots can be captured and displayed on the web interface.

Example:

Video AllowWebSnapshots: Off

Video CamCtrlPip CallSetup Mode

This setting is used to switch on self-view for a short while when setting up a call. The Video CamCtrlPip CallSetup Duration setting determines for how long it remains on. This applies when self-view in general is switched off.

Requires user role: ADMIN

Value space: <Off/On>

Off: self-view is not shown automatically during call setup. On: self-view is shown automatically during call setup.

Example:

Video CamCtrlPip CallSetup Mode: On

Video CamCtrlPip CallSetup Duration

This setting only has an ef fect when the V ideo CamC trlPip CallSetup Mode set ting is switched On. In this case, the number of seconds set here determines for how long self-view is shown before it is automatically switched off.

Requires user role: ADMIN

Value space: <1..60>

Range: Choose for how long self-view remains on. The valid range is bet ween 1 and 60 seconds.

Example:

Video CamCtrlPip CallSetup Duration: 10

Video Input Connector [1..3] Name

Enter a name for the video input connector.

Requires user role: ADMIN

Value space: <S: 0, 50>

Format: String with a maximum of 50 characters.

Example:

Video Input Connector 1 Name: ""

Video Input Connector [1..3] InputSourceType

Select which type of input source is connected to the video input. Note that Connector 1 is the system's integrated camera.

Requires user role: ADMIN

Value space: Connector 1: <camera> Other connectors: <other/camera/PC/DVD/document_

camera/whiteboard>

other: Use this when none of the below options match. camera: Use this when a camera is connected to the video input. PC: Use this when a computer is connected to the video input. DVD: Use this when a DVD player is connected to the video input. document_camera: Use this when a document camera is connected to the video input. whiteboard: Use this when a whiteboard camera is connected to the video input.

Example:

Video Input Connector 2 InputSourceType: PC

Page 97

Cisco TelePresence SX10 Quick Set Administrator Guide

Video Input Connector [1..3] Visibility

Define the visibility of the video input connector in the menus on the user interface. Note that Connector 1 is the system's integrated camera, which is not available as a

presentation source. > The default value is Always for V ideo Input Connector 2 Visibility (the HDMI connector). > The default value is IfSignal for Video Input Connector 3 V isibilit y (the VGA connector).

Requires user role: ADMIN

Value space: Connector 1: <Never> Other connectors: <Never/Always/IfSignal>

Never: When the input source is not expected to be used as a presentation source, set to Ne ve r.

Always: When set to Always, the menu selection for the video input connector will always be visible on the graphical user interface.

IfSignal: When set to IfSignal, the menu selection for the video input connector will only be visible when something is connected to the video input.

Example:

Video Input Connector 2 Visibility: Always

Video Input Connector [1..3] CameraControl Mode

Define whether the camera that is connected to this video input connector can be controlled or not.

Note that camera control is not available for Connector 2 (HDMI) and Connector 3 (VGA).

Requires user role: ADMIN

Value space: Connector 1: <Off/On> Connector 2,3: <Off>

Off: Disable camera control. On: Enable camera control.

Example:

Video Input Connector 1 CameraControl Mode: On

Video Input Connector [1..3] CameraControl CameraId

Define the camera ID. This value is fixed and cannot be changed.

Requires user role: ADMIN

Value space: <1>

Range: This value is fixed and cannot be changed.

Example:

Video Input Connector 1 CameraControl CameraId: 1

Video Input Connector [2..3] Quality

When encoding and transmitting video there will be a trade-off between high resolution and high frame rate. For some video sources it is more important to transmit high frame rate than high resolution and vice versa.

Requires user role: ADMIN

Value space: <Motion/Sharpness>

Motion: Gives the highest possible frame rate. Used when there is a need for higher frame rates, typically when a large number of par ticipants are present or when there is a lot of motion in the picture.

Sharpness: Gives the highest possible resolution. Used when you want the highest quality of detailed images and graphics.

Example:

Video Input Connector 3 Quality: Sharpness

Video Input Connector [1..3] OptimalDefinition Profile

This setting will only take effect if the corresponding Video Input Connector Quality set ting is set to Motion.

The optimal definition profile reflects the lighting conditions in the video conferencing room and the qualit y of the camera. The better lighting conditions and the better qualit y of the camera, the higher the profile. In good lighting conditions, the video encoder will provide better qualit y (higher resolution or frame rate) for a given call rate. Generally, the Normal or Medium profiles are recommended. However, when the lighting conditions are very good, the High profile can be set in order to increase the resolution for a given call rate. The resolution must be supported by both the calling and called systems.

Requires user role: ADMIN

Value space: <Normal/Medium/High>

Normal: Use this profile for a normally to poorly lit environment. Resolutions will be set rather conservative.

Med ium: Requires good and stable lighting conditions and a goo d quality video input. For some call rates this leads to higher resolution.

Hig h: Requires nearly optimal video conferencing lighting conditions and a good quality video input in order to achieve a good overall experience. Rather high resolutions will be used.

Example:

Video Input Connector 1 OptimalDefinition Profile: Medium

Page 98

Cisco TelePresence SX10 Quick Set Administrator Guide

Video Input Connector [2..3] PresentationSelection

Define how the video system will behave when you connect a presentation source to the video input.

If the video system is in standby mode, it will wake up when you connect a presentation source. Note that sharing the presentation with the far end always requires additional action (press Share on the user interface).

Requires user role: ADMIN

Value space: <Manual/Automatic/OnConnect>

Manual: In manual mode, the contents of the video input will not be presented on the screen until you choose it from the user interface.

Automatic: In automatic mode, the contents on the video input will be presented on screen automatically. If more than one source is set to Automatic, the last connected source will be used. If any content is active (presented) when a call is disconnected, the content will still be displayed locally.

OnConnect: When in on-connect mode, the content on the video input will be presented on screen when a cable is connected. Otherwise, the behavior is the same as in manual mode.

Example:

Video Input Connector 2 PresentationSelection: OnConnect

Video Input Connector [2] RGBQuantizationRange

The devices connected to the video input should follow the rules for RGB video quantization range defined in CEA-861. Unfortunately some devices do not follow the standard and this configuration may be used to override the set tings to get a per fect image with any source. The default value is set to Full because most sources expects full quantization range.

Requires user role: ADMIN

Value space: <Auto/Full/Limited>

Auto: RGB quantization range is automatically selected based on video format according to CEA-861-E. CE video formats will use limited quantization range levels. IT video formats will use full quantization range levels.

Full: Full quantization range. The R, G, B quantization range includes all code values (0 -

255). This is defined in CEA-861-E. Limited: Limited Quantization Range. R, G, B quantization range that excludes some code

values at the extremes (16 - 235). This is defined in CEA-861-E.

Example:

Video Input Connector 2 RGBQuantizationRange: Auto

Video Layout LocalLayoutFamily

Select which video layout family to use locally.

Requires user role: ADMIN

Value space: <Auto/FullScreen/Equal/PresentationSmallSpeaker/PresentationLargeSpeaker/

Prominent/Overlay/Single>

Auto: The default layout family, as given in the layout database provided by the system, will be used as the local layout.

FullScreen: Do not use this value. Equal: The Equal layout family will be used as the local layout. A ll videos have equal size, as

long as there is space enough on the screen.

PresentationSmallSpeaker: Do not use this value. PresentationLargeSpeaker: Do not use this value. Prominent: The Prominent layout family will be used as the local layout. The active speaker,

or the presentation if present, will be a large picture, while the other participants will be small pictures. Transitions between active speakers are voice switched.

Overlay: The Overlay layout family will be used as the local layout. The active speaker, or the presentation if present, will be shown in full screen, while the other participants will be small pictures-in-picture (PiP). Transitions between active speakers are voice switched.

Sin gle: The active speaker, or the presentation if present, will be shown in full screen. The other participants are not shown. Transitions between active speakers are voice switched.

Example:

Video Layout LocalLayoutFamily: Auto

Video Layout PresentationDefault View

Determine how the presentation will show on screen when you start sharing a presentation.

Requires user role: ADMIN

Value space: <Default/Minimized/Maximized>

Default: The presentation is a part of the layout. Minimized: The presentation starts up in PIP mode. Maximized: The presentation starts up in full screen mode.

Example:

Video Layout PresentationDefault View: Default

Page 99

Cisco TelePresence SX10 Quick Set Administrator Guide

Video Layout RemoteLayoutFamily

Select which video layout family to be used for the remote participants.

Requires user role: ADMIN

Value space: <Auto/FullScreen/Equal/PresentationSmallSpeaker/PresentationLargeSpeaker/

Prominent/Overlay/Single>

Auto: The default layout family, as given by the local layout database, will be used as the remote layout.

FullScreen: Do not use this value. Equal: The Equal layout family will be used as the remote layout. All videos have equal size,

as long as there is space enough on the screen.

PresentationSmallSpeaker: Do not use this value. PresentationLargeSpeaker: Do not use this value. Prominent: The Prominent layout family will be used as the remote layout. The active

speaker, or the presentation if present, will be a large picture, while the other participants will be small pictures. Transitions bet ween active speakers are voice switched.

Overlay: The Overlay layout family will be used as the remote layout. The active speaker, or the presentation if present, will be shown in full screen, while the other par ticipants will be small pictures-in-picture (PiP). Transitions between active speakers are voice switched.

Sin gle: The active speaker, or the presentation if present, will be shown in full screen. The other participants are not shown. Transitions between active speakers are voice switched.

Example:

Video Layout RemoteLayoutFamily: Auto

Video Layout Scaling

Define how the system shall adjust the aspect ratio for images or frames when there is a difference between the image and the frame it is to be placed in.

Requires user role: ADMIN

Value space: <Off/On>

Off: No adjustment of the aspect ratio. On: Let the system automatically adjust aspect ratio.

Example:

Video Layout Scaling: On

Video Layout ScaleToFrame

Define what to do if the aspect ratio of a video input source doesn't match the aspect ratio of the corresponding image frame in a composition. For example if you have a 4:3 input source (like XGA) to be displayed on a 16:9 output (like HD720).

Requires user role: ADMIN

Value space: <Manual/MaintainAspectRatio/StretchToFit>

Manual: If the difference in aspect ratio between the video input source and the target image frame is less than the Video Layout ScaleToFrameThreshold setting (in percent), the image is stretched to fit. If not, the system will maintain the original aspect ratio.

MaintainAspectRatio: Maintain the aspect ratio of the input source, and fill in black in the rest of the frame (letter boxing or pillar boxing).

St re tc hTo Fi t: Stretch (hor izontally or vertically) the input source to f it into the image frame. NOTE: The general limitation is that you cannot upscale in one direction and at the same time downscale in the other direction. In such situations the codec will apply letterboxing.

Example:

Video Layout ScaleToFrame: MaintainAspectRatio

Video Layout ScaleToFrameThreshold

Only applicable if the Video Layout ScaleToFrame setting is set to manual. If the difference in aspect ratio between the video input source and the target image frame is less than the ScaleToFrameThreshold setting (in percent), the image is stretched to fit. If not, the system will maintain the original aspect ratio.

Requires user role: ADMIN

Value space: <0..100>

Range: Select a value from 0 to 100 percent.

Example:

Video Layout ScaleToFram eThreshold: 5

Page 100

100

Cisco TelePresence SX10 Quick Set Administrator Guide

Video PIP ActiveSpeaker DefaultValue Position

Determine the position on screen of the active speaker picture-in-picture (PiP). The setting only takes effect when using a video layout where the active speaker is a PiP, i.e. the Overlay layout, or possibly a Custom layout (see the Video Layout LocalLayoutFamily setting). The setting takes effect from the next call onwards; if changed during a call, it will have no effect on the current call.

Requires user role: ADMIN

Value space: <Current/UpperLeft/UpperCenter/UpperRight/CenterLeft/CenterRight/LowerLeft/

LowerRight>

Current: The position of the active speaker PiP will be kept unchanged when leaving a call. UpperLeft: The active speaker PiP will appear in the upper left corner of the screen. UpperCenter: The active speaker PiP will appear in the upper center position. UpperRight: The active speaker PiP will appear in the upper right corner of the screen. CenterLeft: The active speaker PiP will appear in the center left position. CentreRight: The active speaker PiP will appear in the center right position. LowerLeft: The active speaker PiP will appear in the lower lef t corner of the screen. LowerRight: The active speaker PiP will appear in the lower right corner of the screen.

Example:

Video PIP ActiveSpeaker DefaultValue Position: Current

Video PIP Presentation DefaultValue Position

Determine the position on screen of the presentation picture-in-picture (PiP). The setting only takes effect when the presentation is explicitly minimized to a PiP, for example using the remote control or the Touch controller. The setting takes effect from the next call onwards; if changed during a call, it will have no effect on the current call.

Requires user role: ADMIN

Value space: <Current/UpperLeft/UpperCenter/UpperRight/CenterLeft/CenterRight/LowerLeft/

LowerRight>

Current: The position of the presentation PiP will be kept unchanged when leaving a call. UpperLeft: The presentation PiP will appear in the upper left corner of the screen. UpperCenter: The presentation PiP will appear in the upper center position. UpperRight: The presentation PiP will appear in the upper right corner of the screen. CenterLeft: The presentation PiP will appear in the center left position. CentreRight: The presentation PiP will appear in the center right position. LowerLeft: The presentation PiP will appear in the lower left corner of the screen. LowerRight: The presentation PiP will appear in the lower right corner of the screen.

Example:

Video PIP Presentation DefaultValue Position: Current

Video SelfviewPosition

Select where the small self-view PiP (Picture-in-Picture) will appear on screen. This setting is obsoleted by the Video SelfviewDefault PIPPosition setting.

Requires user role: ADMIN

Value space: <UpperLeft/UpperCenter/UpperRight/CenterLeft/CenterRight/LowerLeft/

LowerRight>

UpperLeft: The self-view PiP will appear in the upper left corner of the screen. UpperCenter: The self-view PiP will appear in the upper center of the screen. UpperRight: The self-view PiP will appear in the upper right corner of the screen. CenterLeft: The self-view PiP will appear on the left side of the screen, in center. CenterRight: The self-view PiP will appear on the right side of the screen, in center. LowerLeft: The self-view PiP will appear in the lower lef t corner of the screen. LowerRight: The self-view PiP will appear in the lower right corner of the screen.

Example:

Video SelfviewPosition: Ce nterRight

Video SelfviewDefault Mode

Determine if the main video source (self-view) shall be displayed on screen after a call. The position and size of the self-view window is determined by the Video SelfviewDefault PIPPosition and the Video SelfviewDefault FullscreenMode settings respectively.

Requires user role: ADMIN

Value space: <Off/Current/On>

Off: self-view is switched off when leaving a call. Current: self-view is left as is, i.e. if it was on during the call, it remains on after the call; if it

was off during the call, it remains off after the call. On: self-view is switched on when leaving a call.

Example:

Video SelfviewDefault Mode: Current