Cisco TelePresence MX700, TelePresence MX800 Administrator's Manual

Download

Page 1

Cisco TelePresence MX700 and MX800

Contents

Introduction

Web interface

System settings

Setting passwords

Appendices

Software version TC7.2 AUGUST 2014

Administrator guide

for Cisco TelePresence MX700 and MX800

Page 2

Cisco TelePresence MX700 and MX800 Administrator Guide

Contents

Introduction

Web interface

System settings

Setting passwords

Appendices

Contents

Thank you for choosing Cisco!

Your Cisco product has been designed to give you many years of safe, reliable operation.

This part of the product documentation is aimed at administrators working with the setup of the MX700 and MX800.

Our main objective with this Administrator guide is to address your goals and needs. Please let us know how well we succeeded!

May we recommend that you visit the Cisco web site regularly for updated versions of this guide.

The user documentation can be found on

► http://www.cisco.com/go/mx-docs

How to use this guide

The top menu bar and the entries in the Table of contents are all hyperlinks. You can click on them to go to the topic.

Table of contents

Introduction ............................................................................ 4

User documentation ................................................................ 5

Software .................................................................................. 5

What’s new in this version ....................................................... 6

MX700 and MX800 at a glance ............................................... 8

Web interface ...................................................................... 13

Accessing the web interface ................................................. 14

Changing the system password ............................................ 15

The interactive menu ............................................................. 16

System information ................................................................ 17

Placing a call .......................................................................... 18

Sharing content ...................................................................... 19

Controlling and monitoring a call ........................................... 20

Controlling your camera ......................................................... 21

Local layout control ................................................................ 22

Capturing snapshots .............................................................. 23

Controlling the far end camera .............................................. 24

Accessing call information ..................................................... 25

System configuration ............................................................. 26

Changing system settings ..................................................... 27

System status ........................................................................28

Managing the favorites list ..................................................... 29

Favorite list folders ................................................................. 30

Choosing a wallpaper ............................................................ 31

Choosing a ringtone ...............................................................32

Peripherals overview ............................................................. 33

User administration ................................................................ 34

Adding a sign in banner ......................................................... 38

Managing the video system’s certificates ............................. 39

Managing the list of trusted certificate authorities ................ 40

Managing pre-installed certificates for Edge provisioning .... 42

Setting strong security mode ................................................ 43

Changing the persistency mode ............................................ 44

Deleting trust lists (CUCM only) ............................................. 45

Troubleshooting ..................................................................... 46

Downloading log files ............................................................. 47

Starting extended logging .....................................................48

Capturing screenshots ........................................................... 49

Upgrading the system software............................................. 50

Backup and restore ................................................................ 51

Reverting to the previously used software version ............... 52

Factory reset .......................................................................... 53

Remote support user ............................................................. 54

Restarting the system ............................................................ 55

System settings ................................................................... 56

Overview of the system settings ........................................... 57

Audio settings ........................................................................ 60

Cameras settings ................................................................... 66

Conference settings .............................................................. 69

FacilityService settings .......................................................... 73

GPIO settings ......................................................................... 74

H323 settings ......................................................................... 75

Logging settings .................................................................... 78

Network settings .................................................................... 79

NetworkServices settings ...................................................... 86

Peripherals settings ............................................................... 90

Phonebook settings ............................................................... 91

Provisioning settings .............................................................. 92

RTP settings ........................................................................... 94

Security settings .................................................................... 95

SerialPort settings.................................................................. 97

SIP settings ............................................................................ 98

Standby settings .................................................................. 102

SystemUnit settings ............................................................. 103

Time settings ....................................................................... 104

UserInterface settings.......................................................... 107

Video settings ...................................................................... 109

Experimental settings ...........................................................11 9

Setting passwords ............................................................. 120

Setting the system password .............................................. 121

Page 3

Cisco TelePresence MX700 and MX800 Administrator Guide

Contents

Introduction

Web interface

System settings

Setting passwords

Appendices

Contents

Appendices ........................................................................ 12 2

Cisco VCS provisioning ....................................................... 123

LED indicators ...................................................................... 124

Connecting the Touch 10 user interface ............................. 125

Connecting an external monitor to MX700 .......................... 127

Connecting external monitors to MX800 ............................. 128

Connecting a computer ....................................................... 129

Using the speaker tracking functionality .............................. 13 0

Advanced customization of video ........................................ 131

Optimal definition profiles .................................................... 132

ClearPath — Packet loss resilience ...................................... 133

Factory resetting the system ............................................... 134

Factory resetting the Touch 10 user interface ..................... 135

Technical specification for MX700 and MX800 ................... 136

Supported RFCs .................................................................. 139

User documentation on the Cisco web site ......................... 14 0

Cisco contacts ....................................................................141

Page 4

Cisco TelePresence MX700 and MX800 Administrator Guide

Contents

Introduction

Web interface

System settings

Setting passwords

Appendices

Introduction

Chapter 1

Introduction

Page 5

Cisco TelePresence MX700 and MX800 Administrator Guide

Contents

Introduction

Web interface

System settings

Setting passwords

Appendices

Introduction

This document provides you with the information required to administrate your product at an advanced level.

How to install the product and the initial configurations required are described in the Installation guide and Getting started guide, respectively.

Products covered in this guide

• Cisco TelePresence MX700

• Cisco TelePresence MX800

These products comes with either a single camera, or with a dual camera assembly. The systems are either mounted on a free standing floor stand, mounted on a floor stand that is secured to the wall, or wall mounted. This guide covers all options.

User documentation

The user documentation for the Cisco TelePresence systems running the TC software includes several guides suitable for various user groups.

• Installation guide: How to install the product

• Getting started guide: Initial configurations required to get the system up and running

• Administering TC Endpoints on CUCM: Tasks to perform to start using the product with the Cisco Unified Communications Manager (CUCM)

• Administrator guide (this guide): Information required to administer your product

• Quick reference guides: How to use the product

• User guides: How to use the product

• API reference guide: How to use the Application Programmer Interface (API), and reference guide for the command line commands

• Video conferencing room primer: General guidelines for room design and best practice

• Video conference room acoustics guidelines: Things to do to improve the perceived audio quality

• Software release notes

• Regulatory compliance and safety information guide

• Legal & license information

Downloading the user documentation

We recommend you visit the Cisco web site regularly for updated versions of the user documentation. Go to:

► http://www.cisco.com/go/mx-docs

Guidelines how to find the documentation on the Cisco web site are included in the

► User documentation on the Cisco web site appendix.

Software

You can download the software for your product from the Cisco web site, go to:

► http://www.cisco.com/cisco/software/navigator.html

We recommend reading the Software Release Notes (TC7), go to:

► http://www.cisco.com/c/en/us/support/collaboration- endpoints/telepresence-mx-series/tsd-productssupport-series-home.html

Page 6

Cisco TelePresence MX700 and MX800 Administrator Guide

Contents

Introduction

Web interface

System settings

Setting passwords

Appendices

Introduction

What’s new in this version

This section provides an overview of the new and changed system settings and new features in the TC7.2 software version.

Software release notes

For a complete overview of new features and changes, we recommend reading the Software Release Notes (TC7). Go to:

► http://www.cisco.com/c/en/us/support/collaborationendpoints/telepresence-mx-series/tsd-products-supportseries-home.html

Software download

For software download go to:

► http://www.cisco.com/cisco/software/navigator.html

New features and improvements

Support for Touch 10 network pairing

Network pairing of the Touch 10 user interface is supported.

Web snapshots can be enabled remotely from the web interface

Web snapshots can be enabled remotely from the web interface. In previous versions web snapshots had to be enabled locally on the endpoint.

Improved fail-over support for endpoints registered through Collaboration Edge

CUCM: If the CUCM is down, the endpoint will automatically re-register to another CUCM.

VCS Control and VCS Expressway: If the VCS Control or VCS Expressway goes down, the endpoint will automatically re-register to another VCS Control / VCS Expressway. Call preservation is not supported.

Provisioning (HTTPS): If the provisioning service goes down, the endpoint will receive provisioning data from another provisioning service.

Phone book: If the phone book service goes down, the endpoint will automatically use another phone book service.

Touch user interface and on-screen display (OSD) screenshots can be captured from the web interface

A new web feature has been implemented to be able to capture screenshots of the OSD and the touch panel. This feature is available even if web snapshots are disabled.

The Video Output status provides information about the connected display

In order to identify the connected display model and its preferred resolution the Video Output status will now print the following values:

• Video Output Connector n Connected

• Video Output Connector n ConnectedDevice Name

• Video Output Connector n ConnectedDevice PreferredFormat

More parameters can be provisioned from CUCM

The following configuration parameters can now be provisioned from CUCM under vendor specific configuration:

• SystemUnit Name

• Video OSD TodaysBookings

• Standby StandbyAction

• Audio DefaultVolume

• Conference 1 MaxTotalReceiveCallRate

• Conference 1 MaxTotalTransmitCallRate

Page 7

Cisco TelePresence MX700 and MX800 Administrator Guide

Contents

Introduction

Web interface

System settings

Setting passwords

Appendices

Introduction

System configuration changes

New configurations

Cameras SpeakerTrack Mode

Cameras SpeakerTrack TrackingMode

H323 Profile [1] Encryption MinKeySize

NetworkServices CTMS Encryption

NetworkServices CTMS Mode

NetworkServices Medianet Metadata

Peripherals Pairing CiscoTouchPanels RemotePairing

Peripherals Profile TouchPanels

Time OlsonZone

Configurations that are modified

Video Input Connector[n] InputSourceType

OLD: <other/camera/PC/DVD/document_camera> NEW: <other/camera/PC/DVD/document_camera/

whiteboard>

Page 8

Cisco TelePresence MX700 and MX800 Administrator Guide

Contents

Introduction

Web interface

System settings

Setting passwords

Appendices

Introduction

MX700 and MX800 at a glance

Cisco TelePresence MX700 and MX800 represent the performance line within Cisco’s portfolio of integrated video collaboration room systems. These systems integrate powerful functionality into an all-in-one solution for mediumto-large meeting rooms. The MX700 has two 55” LED monitors, while the MX800 has one 70” LED monitor.

The MX700 and MX800 systems come standard with a builtin amplifier and speaker system for high fidelity sound. You can choose from a single camera or a dual camera speakertracking solution; both cameras deliver the best possible video imaging with up to 20x zoom and 1080p60 resolution. Premium resolution and dual display are also standard features on the MX700 and MX800. The Cisco TelePresence Touch 10 provides an easy-to-use interface for both MX700 and MX800 systems.

Industr y standards compliance lets the MX700 and MX800 support calls with any third party, standards-based system, including software-based video conferencing solutions. And, as the industry’s only H.265-ready systems (in SIP calls), the MX700 and MX800 lay the foundation for future bandwidth efficiencies made possible by the new standard.

MX700 with dual camera assembly MX800 with single camera

Features and benefits

• Powerful and feature-rich video systems with ultimate video and audio quality

• High performance video collaboration codec

• High-definition pan-tilt-zoom camera

• Everything you need in one unit: screen(s), speakers, codec, camera, microphones

• Three mounting options: wall mount, free standing floorstand, floorstand secured to the wall

• Built-in speaker tracking system as option

• Five-way embedded 1080p30 HD multipoint solution (Cisco TelePresence MultiSite) with individual transcoding

• Four simultaneous video inputs

• 1080p60 main video and 1080p30 content

• One button to push (OBTP) to start a meeting

• Ideal for team-based collaboration, boardrooms, meeting rooms and video centric rooms

• Dual presentation outside of a call (e.g. use the MX700 dual screens to compare two presentations or documents)

• Optimal definition up to 1080p60

• H.323/SIP up to 6 Mbps point-to-point

• Up to 10 Mbps total MultiSite bandwidth

• Ability to connect up to four HD input sources and eight microphones directly to the codec

• Full duplex audio with high-quality stereo sound

• Cisco TelePresence ClearPath packet loss protection technology

• Native support for Cisco Unified Communications Manager (requires Cisco Unified Communications Manager version 8.6 or higher)

Page 9

Cisco TelePresence MX700 and MX800 Administrator Guide

Contents

Introduction

Web interface

System settings

Setting passwords

Appendices

Introduction

MX700 with single camera at a glance

Loudspeakers

(full range multichannel and bass)

Two 55” monitors

Embedded codec

Mounting options

Camera

(20x zoom, 1080p60)

Free standing floor stand

Microphones

(default: two; maximum: eight)

Touch 10 user interface

Floor stand secured to the wall

Wall mount

Page 10

Cisco TelePresence MX700 and MX800 Administrator Guide

Contents

Introduction

Web interface

System settings

Setting passwords

Appendices

Introduction

MX700 with dual camera at a glance

Loudspeakers

(full range multichannel and bass)

Two 55” monitors

Embedded codec

Mounting options

Dual camera assembly

(speaker-track, 20x zoom, 1080p60)

Free standing floor stand

Microphones

(default: two; maximum: eight)

Touch 10 user interface

Floor stand secured to the wall

Wall mount

Page 11

Cisco TelePresence MX700 and MX800 Administrator Guide

Contents

Introduction

Web interface

System settings

Setting passwords

Appendices

Introduction

MX800 with single camera at a glance

Loudspeakers

(full range multichannel and bass)

70” monitor

Embedded codec

Microphones

(default: two; maximum: eight)

Camera

(20x zoom, 1080p60)

Mounting options

Free standing floor stand

Floor stand secured to the wall

Touch 10 user interface

Wall mount

Page 12

Cisco TelePresence MX700 and MX800 Administrator Guide

Contents

Introduction

Web interface

System settings

Setting passwords

Appendices

Introduction

MX800 with dual camera at a glance

Loudspeakers

(full range multichannel and bass)

70” monitor

Embedded codec

Microphones

(default: two; maximum: eight)

Dual camera assembly

(speaker-track, 20x zoom, 1080p60)

Mounting options

Free standing floor stand

Floor stand secured to the wall

Touch 10 user interface

Wall mount

Page 13

Cisco TelePresence MX700 and MX800 Administrator Guide

Contents

Introduction

Web interface

System settings

Setting passwords

Appendices

Web interface

Chapter 2

Web interface

Page 14

Cisco TelePresence MX700 and MX800 Administrator Guide

Contents

Introduction

Web interface

System settings

Setting passwords

Appendices

Web interface

Accessing the web interface

The web interface provides full configuration access to your video conference system.

You can connect from a computer and administer the system remotely.

In this chapter you will find information how to use the web interface for system configuration and maintenance.

We recommend that you use the latest release of one of the major web browsers.

1. Connect to the video system

Open a web browser and enter the IP address of the video system in the address bar.

How to find the IP address

Touch controller: Tap the contact information in the upper left corner of the Touch controller and open the

Settings menu. Then tap System Information.

2. Sign in

Enter the user name and password for your video system and click Sign In.

The system is delivered with a default user named admin with no password. Leave the Password field blank when signing in for the first time.

It is mandatory to set a password for the admin user, see the next page.

Signing out

Hover the mouse

over the user

name and choose

Sign out from the

drop-down list.

Page 15

Cisco TelePresence MX700 and MX800 Administrator Guide

Contents

Introduction

Web interface

System settings

Setting passwords

Appendices

Web interface

Changing the system password

It is mandatory to set a password for a user with ADMIN rights in order to restrict access to system configuration. This includes the default admin user.

A warning, saying that the system password is not set, is shown on screen until you set a password.

You can read more about passwords in the

► Setting passwords chapte r.

1. Open the Change Password dialog

Hover the mouse over your the name, and choose Change password in the drop-down list.

2. Set the new password

Enter your current and new passwords as requested, and click Change password for the change to take effect.

If the password currently is not set, leave the Current password field blank.

Page 16

Cisco TelePresence MX700 and MX800 Administrator Guide

Contents

Introduction

Web interface

System settings

Setting passwords

Appendices

Web interface

The interactive menu

The web interface provides access to tasks and configurations. They are available from the main menu, which appears near the top of the page when you have signed in.

When you hover the mouse over an item in the main menu, you can navigate to its related sub-pages.

Main menu

Hover the mouse over a main menu item in order to see the titles of the related sub-pages.

Click a sub-page’s title to open it. Click the main menu item itself if there are no subpages. Only pages that the user has access rights for are shown

Click Home to return to the System Information page.

You can read more about user administration, user roles and access

Sub-pages

Call Control Maintenance

Configuration

System Configuration

System Status

Local Contents Management

Personalization

Peripherals

User Administration

Startup Scripts

API

Security

Diagnostics

Troubleshooting

Call History

Log Files

User Interface Screenshots

Software Upgrade

Backup an d Restor e

System Recovery

Restart

rights in the ► User administration section.

Page 17

Cisco TelePresence MX700 and MX800 Administrator Guide

Contents

Introduction

Web interface

System settings

Setting passwords

Appendices

Web interface

System information

The video system’s Home page shows an over view of the basic set-up and status of the system

This includes information like system name and product type, which software version the system runs, its IPaddress, etc. Also the registration status for the video networks (SIP and H.323) is included, as well as the number/URI to use when making a call to the system.

Note that the video system cannot be registered to H.323 and SIP simultaneously.

Navigate to: Home

The system information shown in the illustration serve as an example. Your system may be different.

Page 18

Cisco TelePresence MX700 and MX800 Administrator Guide

Contents

Introduction

Web interface

System settings

Setting passwords

Appendices

Web interface

Placing a call

You can use the Call Control page to place a call.

Even if the web interface is used to initiate the call, it is the video system (display, microphones and loudspeakers) that is used for the call; it is not the PC running the web interface.

Calling

You can call someone either by choosing a contact name in the Local, Directory or Recents lists, or by typing a complete URI or number in the Search or Dial field. Then click Call in the associated contact card.

Searching the contact lists

Enter one or more characters in the Search or Dial field. Matching entries from the Local, Directory and Recents lists will be listed as you type.

Select the correct entry in the list and click Call.

Calling more than one

A point-to-point video call (a call involving two parties only) may be expanded to include more participants.

If your system supports the optional built-in MultiSite feature, up to five participants, yourself included, can join the video call (conference).

Follow the same procedure to call the next conference participant as you did when calling the first participant.

Navigate to: Call Control

Calling someone

Click a contact name, either in the

Local, Directory or Recents lists.

Then click Call in the contact card.

Alternatively, enter the complete URI

or number in the Search and Dial

field. Then click the Call button that

appears next to the URI or number.

Holding and resuming

Use the to the participant’s name to put him on hold.

To resume the call, use the button that is present when a participant is on hold.

button next

Ending a call

If you want to terminate a call or conference, click End

all. Confirm your choice in

the dialog that appears.

To disconnect just one participant in a conference, click the participant.

button for that

Page 19

Cisco TelePresence MX700 and MX800 Administrator Guide

Contents

Introduction

Web interface

System settings

Setting passwords

Appendices

Web interface

Sharing content

You can connect a presentation source to one of the external inputs of your video system. Most often a PC is used as presentation source, but other options may be available depending on your system setup.

While in a call you can share content with the far end, that is the other participant(s) in the call.

If you are not in a call, the content is shared locally on your display.

Navigate to: Call Control

Sharing content

1. Choose a Presentation source from the drop-down list.

2. Click Start Presentation.

Stop content sharing: Click the Stop Presentation button that is present

while sharing.

Page 20

Cisco TelePresence MX700 and MX800 Administrator Guide

Contents

Introduction

Web interface

System settings

Setting passwords

Appendices

Web interface

Controlling and monitoring a call

You can control and monitor several call features using the Call Control page.

Navigate to: Call Control

Microphone mute

Click the button to mute the microphone. Then the text changes to

Microphone: Off.

Click again to unmute.

Volume down

Volume up

Show/hide

call details

Click the

information button

to show details

about the call.

Click the button

again to hide the

information.

Call details

scroll your browser to

If necessary,

see the call details.

Page 21

Cisco TelePresence MX700 and MX800 Administrator Guide

Contents

Introduction

Web interface

System settings

Setting passwords

Appendices

Web interface

Controlling your camera

You can control the camera from the Call Control page.

The camera controls (pan, tilt, zoom) are available when the cursor is placed in the Main Source video area. Live snapshots are automatically taken during this period.

Note that the camera controls are not available if the system is in standby mode.

Navigate to: Call Control

Choose which camera to control

Click the arrow to open the

drop-down list. Then choose the

camera you want to control.

Zoom

Use + and - to zoom in and out.

Pan and tilt

Use the left and right arrows to pan the camera, and the up and down arrows to tilt it.

Page 22

Cisco TelePresence MX700 and MX800 Administrator Guide

Contents

Introduction

Web interface

System settings

Setting passwords

Appendices

Web interface

Local layout control

You can choose a local layout using the Call Control page.

The term layout is used to describe the various ways the videos from the conference participants and a presentation can appear on the screen. Different types of meetings may require different layouts.

Navigate to: Call Control

Change the layout

Click Change layout, and choose your preferred layout in the window that opens.

The set of layouts to choose from depends on the system configurations.

You may change the layout while in a call.

Page 23

Cisco TelePresence MX700 and MX800 Administrator Guide

Contents

Introduction

Web interface

System settings

Setting passwords

Appendices

Web interface

Capturing snapshots

The snapshot feature, which is disabled by default, allows snapshots captured by the video system to be displayed on the Call Control page. Captures from the video system’s camera as well as from its presentation channel will be displayed.

This feature might come in handy when administering the video system from a remote location, e.g. to check the camera view.

To use web snapshots you have to sign in with ADMIN credentials.

Enabling the snapshot feature

The snapshot feature is disabled by default. The feature must be enabled using the web interface.

Web interface:

• Go to the Configuration tab and select System

Configuration

• Navigate to Video > AllowWebSnapshots and choose On.

• Click Save for the change to take effect.

Far end snapshots while in a call

While in a call, snapshots of the remote participant’s main camera and presentation channel (far end) will be captured and displayed as shown in the illustration. The snapshots are updated approximately every 30seconds.

Far end snapshots are captured even if web snapshots are disallowed on the far end video system. Web snapshots are prohibited only for encrypted calls.

Navigate to: Call Control

Far end snapshots

Click the snapshot in order

to see a larger image.

Take live snapshots

While the Live snapshots box is checked,

snapshots are captured by the video

system (main source and presentation

source) approximately every two seconds.

Snapshots from the video system

Page 24

Cisco TelePresence MX700 and MX800 Administrator Guide

Contents

Introduction

Web interface

System settings

Setting passwords

Appendices

Web interface

Controlling the far end camera

While in a call, you can control the remote participant’s camera (far end) provided that:

• The Conference FarEndControl Mode setting is switched On on the far end video system.

• The far end camera has pan, tilt or zoom functionality. Only the relevant controls will appear.

Navigate to: Call Control

Far end camera control indicator

If this symbol is present, you can control the remote participant’s camera.

Control the remote participant’s camera

1. Click the snapshot to show it in a larger window.

2. Place the cursor in the image to enable the controls.

3. Use the left and right arrows to pan the camera; the up and

down arrows to tilt it; and + and - to zoom in and out.

Page 25

Cisco TelePresence MX700 and MX800 Administrator Guide

Contents

Introduction

Web interface

System settings

Setting passwords

Appendices

Web interface

Accessing call information

A call state indicator is available in the top bar in the web interface. It shows whether the system is in a call or not, and how many calls it is engaged in. You may also be notified about incoming calls.

Call state indicator

The call state indicator is

available on all pages except

the Call Control page.

The badge indicates the number

of active calls. If the system is

idle, there is no badge.

Click the indicator to get more

details about connected calls.

Call control

Use these buttons to:

• Show call details

• Put the call on hold

• Disconnect the call

Incoming call notification

As default, a notification is given when the system receives a call.

Check this box, if you do not want to receive such notifications.

Opening the Call Control page

Click Open Call Control to go straight to the Call Control page.

Page 26

Cisco TelePresence MX700 and MX800 Administrator Guide

Contents

Introduction

Web interface

System settings

Setting passwords

Appendices

Web interface

System configuration

The system settings are grouped in several categories. When you choose a category in the left pane all related settings appear to the right

Each system setting is further described in the

► System settings chapte r.

Navigate to: Configuration > System Configuration

All settings (including the value space) containing these letters will be highlighted.

Searching for settings

Enter as many letters as needed in the search field.

Selecting a category

The conf iguration shown in the illustration serve as an example. Your system may be configured dif ferently.

Choose a category in order to display the related settings.

The system settings are structured in categories.

Expanding and collapsing lists

Use these buttons to expand and collapse all or individual lists.

Page 27

Cisco TelePresence MX700 and MX800 Administrator Guide

Contents

Introduction

Web interface

System settings

Setting passwords

Appendices

Web interface

Changing system settings

All system settings can be changed from the System Configuration page either in a drop-down list or by text following the input field.

Different settings may require different user credentials. In order to be sure that an administrator is able to change all system settings, an administrator user must possess all user roles.

You can read more about user administration and user roles in the ► User administration chap ter.

. The value space for a setting is specified

Navigate to: Configuration > System Configuration

Drop-down list

Click the arrow to open the drop-down list. Choose the preferred value and click

Save for the change to take effect.

Text input field

Enter text in the input field and click

The conf iguration shown in the illustration serve as an example. Your system may be configured dif ferently.

Save for the change to take effect.

Page 28

Cisco TelePresence MX700 and MX800 Administrator Guide

Contents

Introduction

Web interface

System settings

Setting passwords

Appendices

Web interface

System status

The system status is grouped in several categories. When you choose a category in the left column, the related status appears in the window to the right

Navigate to: Configuration > System Status

Selecting a category

The system status is structured in

categories. Choose a category in order

to display the related status information.

Searching for status entries

Enter as many letters as needed in the search field.

All entries (including the value space) containing these letters will be highlighted.

Expanding and collapsing lists

Use these buttons to expand and collapse all or individual lists.

The status shown in the illustration ser ve as an example. The status of your system may be different.

Page 29

Cisco TelePresence MX700 and MX800 Administrator Guide

Contents

Introduction

Web interface

System settings

Setting passwords

Appendices

Web interface

Managing the favorites list

The entries in the favorites list can be accessed from the Touch controller and the Web interface.

Navigate to: Configuration > Local Contacts Management

Editing contact details

Click a contacts name

followed by Edit contact.

Change the details in the form

as appropriate and click Save.

Deleting a contact

Click a contacts name

followed by Edit contact. Then

click Delete to remove the

entry from the Favorites list.

Adding a contact

Click Add contact and fill in

the form that pops up. Then

click Save to store the contact

in the Favorites list.

Storing a contact in a folder

Choose the appropriate folder

from the drop down list.

No folder means that the contact

will be stored at the top level.

Adding a contact method*

You can store more than one contact method for each contact, e.g. video, telephone and mobile.

Note that only the first contact method appears in the Favorites list on the Touch controller.

Page 30

Cisco TelePresence MX700 and MX800 Administrator Guide

Contents

Introduction

Web interface

System settings

Setting passwords

Appendices

Web interface

Favorite list folders

The entries in the Favorites list can be organized in folders.

Navigate to: Configuration > Local Contacts Management

Adding a folder

Click Add folder and fill in the

form that pops up. Then click

Save to create the folder.

Opening a folder

Click the folder name to open the folder and show its list of contacts.

Changing or Deleting a folder

Click Edit folder and update the

information in the form that pops up.

Then click Save to store the changes

Click Delete to remove the folder

and all its contacts and sub-folders.

Confirm your choice in the dialog that

pops up.

Page 31

Cisco TelePresence MX700 and MX800 Administrator Guide

Contents

Introduction

Web interface

System settings

Setting passwords

Appendices

Web interface

Choosing a wallpaper

If you want the company logo or another custom picture as background on the video display, you may upload and use a custom wallpaper.

Navigate to: Configuration > Personalization

Activate/deactivate a wallpaper

Available wallpapers are represented by a miniature. If you have uploaded a custom wallpaper, it will appear in the list.

Click the miniature to switch to the corresponding wallpaper. Choose None if you do not want a wallpaper.

The chosen option is highlighted.

Upload a custom wallpaper

Click Browse... and locate your custom wallpaper image file.

Click Upload to save the file on the video system.

Supported file formats: BMP, GIF, JPEG, PNG Maximum file size: 2 MByte

The custom wallpaper will be automatically activated once uploaded.

Click the delete symbol to remove the custom

wallpaper from the video system. Note that this

will remove the image file completely; you have to

upload it anew if you want to use it again.

Delete the custom wallpaper

Page 32

Cisco TelePresence MX700 and MX800 Administrator Guide

Contents

Introduction

Web interface

System settings

Setting passwords

Appendices

Web interface

Choosing a ringtone

You can choose from a set of predefined ringtones. The chosen ringtone can be played back from this page.

The ringtone will be played back on the video system itself, and not through the web interface.

Navigate to: Configuration > Personalization

Changing ringtone

Choose a ringtone from the drop-down list, and click Save to make it the active ringtone.

Playing back the ringtone

Click the play button ( ► ) to play back the ringtone.

Use the stop button (  ) to end the playback.

Set the ringtone volume

Use the slide bar to adjust the ringtone volume.

Page 33

Cisco TelePresence MX700 and MX800 Administrator Guide

Contents

Introduction

Web interface

System settings

Setting passwords

Appendices

Web interface

Peripherals overview

This page shows an overview of devices that are connected to the video system, like video inputs and outputs, cameras, microphones and Touch controllers

Navigate to: Configuration > Peripherals

The peripherals shown in the illustration ser ve as examples. Your system may have different peripherals and video input/output configurations.

Page 34

Cisco TelePresence MX700 and MX800 Administrator Guide

Contents

Introduction

Web interface

System settings

Setting passwords

Appendices

Web interface

User administration

You can manage your video conference system’s user accounts from this page.

(page 1 of 4)

The default user account

The system comes with a default administrator user account with full access rights. The user name is admin and no password is set.

It is mandatory to set a password for the admin user.

Read more about passwords in the ► Setting passwords ch a p ter.

About user roles

A user account must hold one or a combination of several user roles.

The following three user roles, with non-overlapping rights, exist:

• ADMIN: A user holding this role can create new users and change most settings. The user neither can upload audit certificates nor change the security audit settings.

• USER: A user holding this role can make calls and search the phone book. The user can modify a few settings, e.g. adjusting the ringtone volume and setting the time and date format.

• AUDIT: A user holding this role can change the security audit configurations and upload audit certificates.

Navigate to: Configuration > User Administration

Default user account

The system comes with admin as the default user account. This user has full access rights.

An administrator user account with full access rights, like the default admin user, must possess all the three roles.

Page 35

Cisco TelePresence MX700 and MX800 Administrator Guide

Contents

Introduction

Web interface

System settings

Setting passwords

Appendices

Web interface

User administration

(page 2 of 4)

Creating a new user account

Follow these steps in order to create a new user account:

1. Click Add new user....

2. Fill in the Username and Password appropriate user roles check boxes.

As a default the user has to change the password when signing in for the first time.

Do not fill in the Client Certificate DN (Distinguished Name) field unless you want to use certificate login on HTTPS.

3. Set the Status to Active to activate the user.

4. Click Create User to save the changes.

Use the Back button to leave without making any changes.

, and check the

Navigate to: Configuration > User Administration

* The passw ord is used with the we b interface and com mand line interfac e.

Page 36

Cisco TelePresence MX700 and MX800 Administrator Guide

Contents

Introduction

Web interface

System settings

Setting passwords

Appendices

Web interface

User administration

(page 3 of 4)

Changing user privileges

Follow these steps in order to change the user privileges:

1. Click the name of an existing user to open the Editing user window.

2. Check the appropriate user roles check boxes, decide if the user has to change the password on the next sign in, and fill in the Client Certificate DN field if using certificate login on HTTPS.

3. Click Update User to save the changes.

Use the Back button to leave without making any changes.

Changing the password

Follow these steps in order to change the password*:

1. Click the name of an existing user to open the Editing user window.

2. Enter the new password in the appropriate input fields.

3. Click Change Password to save the change.

Use the Back button to leave without making any changes.

Navigate to: Configuration > User Administration

* The passw ord is used with the we b interface and com mand line interfac e.

Page 37

Cisco TelePresence MX700 and MX800 Administrator Guide

Contents

Introduction

Web interface

System settings

Setting passwords

Appendices

Web interface

User administration

(page 4 of 4)

Deactivating a user account

Follow these steps in order to deactivate a user account:

1. Click the name of an existing user to open the Editing user window.

2. Set the Status to Inactive.

3. Click Update User to save the changes.

Use the Back button to leave without making any changes.

Deleting a user account

Follow these steps in order to delete a user account:

1. Click the name of an existing user to open the Editing user window.

2. Click Delete <user name>... and confirm when prompted.

Navigate to: Configuration > User Administration

Page 38

Cisco TelePresence MX700 and MX800 Administrator Guide

Contents

Introduction

Web interface

System settings

Setting passwords

Appendices

Web interface

Adding a sign in banner

If a system administrator wants to provide initial information to all users, he can create a sign in banner. The message will be shown when the user signs in to the web interface and the command line interface.

Navigate to: Configuration > Sign In Banner

Adding a sign in banner

Enter the message that you

want to present to the user

when signing in, and click

Save to activate the banner.

Page 39

Cisco TelePresence MX700 and MX800 Administrator Guide

Contents

Introduction

Web interface

System settings

Setting passwords

Appendices

Web interface

Managing the video system’s certificates

Certificate validation may be required when using TLS (Transport Layer Security).

A server or client may require that your video system presents a valid certificate to them before communication can be set up.

The video system’s certificates are text files that verify the authenticity of the system. These certificates may be issued by a certificate authority (CA).

The certificates are listed as shown in the illustration to the

. They can be used for the following services: HTTPS

right server, SIP, IEEE 802.1X and audit logging.

You can store several certificates on the system, but only one certificate can be used for each service at a time.

If authentication fails, the connection will not be established.

Contact your system administrator to obtain the following file(s):

• Certificate (file format: .PEM)

• Private key, either as a separate file or included in the same file as the certificate (file format: .PEM format)

• Password (required only if the private key is encrypted)

The certificate and the private key will be stored in the same file on the video system.

Navigate to: Configuration > Security: Certificates tab

Adding a certificate

1. Click Browse... and find the Certificate and Private key file(s) on your computer.

2. Fill in the Password if required.

3. Click Add certificate... to store the certificate on your system.

Enabling and disabling certificates

Use the buttons to switch a certificate on or off for the different services.

You can also view a certificate, and delete a certificate using the corresponding buttons.

The cer tificates and certificate issuers shown in the illustration serve as examples. Your system may have other certificate(s).

Page 40

Cisco TelePresence MX700 and MX800 Administrator Guide

Contents

Introduction

Web interface

System settings

Setting passwords

Appendices

Web interface

Managing the list of trusted certificate authorities

Certificate validation may be required when using TLS (Transport Layer Security).

Your video system may be set up to require that a server or client presents its certificate to the video system before communication can be set up.

The certificates are text files that verify the authenticity of the server or client. The certificates must be signed by a trusted certificate authority (CA).

To be able to verify the signature of the certificates, a list of trusted CAs must reside on the video system. The certificates of the CAs are listed as shown in the illustration to the right

The list must include all CAs needed in order to verify certificates for audit logging, HT TPS, SIP and IEEE 802.1X connections.

If the server cannot be authenticated, the connection will not be established.

(page 1 of 2)

Navigate to: Configuration > Security: CAs tab

Uploading a list of certificate authorities

The entries in a new file with CA certificates will be appended to the existing list, so that the previously stored certificates will not be deleted.

i. Click Browse... and find the file containing a

list of CA certificates (file format: .PEM) on

ii. Click the Add certificate authority... to store

the new CA certificate(s) on your system.

Viewing and deleting certificates

You can view a certificate, and delete a certificate using the corresponding buttons.

your computer.

Contact your system administrator to obtain the CA certificate list (file format: .PEM).

The cer tificate and certificate issuers shown in the illustration serve as examples. Your system will have other certificate(s).

Page 41

Cisco TelePresence MX700 and MX800 Administrator Guide

Contents

Introduction

Web interface

System settings

Setting passwords

Appendices

Web interface

Managing the list of trusted certificate authorities

As from software version TC7.2, the signature of an audit server is verified using the same CA list as other servers/clients.

Setting up secure audit logging

Audit logging records all sign in activity and configuration changes on your video system.

Audit logging is disabled by default, but you can enable it using the Security > Audit > Logging > Mode setting.

In ExternalSecure audit logging mode the video system sends encrypted audit logs to an external audit server (syslog server), which identity must be verified by a signed certificate.

If the audit server cannot be authenticated, the logs will not be sent.

Always upload the list of trusted certificate authorities before enabling secure audit logging.

(page 2 of 2)

Navigate to: Configuration > Security: CAs tab / Configuration > System Configuration

iii

Enable secure audit logging

i. Go to the System

Configuration page and

choose the Security category.

ii. Enter the Address of

the audit server. If you choose Manual

PortAssignment, you

must also enter a Port number for the audit server. Click Save for the changes to take effect.

iii. Choose ExternalSecure

from the Logging Mode drop-down list. Click

Save for the change to

take effect.

Page 42

Cisco TelePresence MX700 and MX800 Administrator Guide

Contents

Introduction

Web interface

System settings

Setting passwords

Appendices

Web interface

Managing pre-installed certificates for Edge provisioning

The list of pre-installed certificates that is shown on this page in the web interface used when the video system is provisioned by Cisco Unified Communications Manager (CUCM) via Expressway (Edge). Only Edge infrastructure certificates will be checked against this list.

If the Edge infrastructure certificate validation fails, the video system will not receive the provisioning and not be registered.

Factory resetting the video system will not delete the list of pre-installed certificates.

, contains certificates that will be

Navigate to: Configuration > Security: Preinstalled CAs tab

Viewing or disabling certificates

You can view a certificate, and disable a certificate using the corresponding buttons.

You can disable all the preinstalled certificates, and use a manually uploaded list of certificates for verification instead. See the Configuration > Security:

CAs page how to upload trusted

certificates to the video system manually.

The cer tificate and certificate issuers shown in the illustration serve as examples. Your system will have other certificate(s).

Page 43

Cisco TelePresence MX700 and MX800 Administrator Guide

Contents

Introduction

Web interface

System settings

Setting passwords

Appendices

Web interface

Setting strong security mode

Strong security mode should be used only when compliance with DoD JITC regulations is required.

Read the provided information carefully before setting strong security mode.

Strong security mode sets very strict password requirements, and requires all users to change their password on the next sign in.

Software upload from TMS, web snapshots and calling from the web interface are prohibited in strong security mode.

Navigate to: Configuration > Security: Strong Security Mode tab

Setting strong security mode

Read carefully about the consequences of

strong security mode before you continue.

1. If you want to use strong security mode,

click Enable strong security mode....

Confirm your choice in the dialog box

that appears.

The system will restart automatically.

2. Change the password when you are

prompted. The new password must meet

the strict criteria as described.

How to change the system password is

described in the ► Setting passwords

section.

Return to normal mode

When in strong security mode, the system

can be restored to normal mode by clicking

Disable strong security mode.... Confirm your

choice in the dialog box that appears

The system will restart automatically.

Page 44

Cisco TelePresence MX700 and MX800 Administrator Guide

Contents

Introduction

Web interface

System settings

Setting passwords

Appendices

Web interface

Changing the persistency mode

By default, all persistency settings are set to Persistent. This means that configurations, call histor y, internal logs, local phonebook / favorites list and IP connectivity information are stored as normal. A system restart does not delete information.

As a general rule, we recommend NOT to change the default settings for persistency. But in the case were a

new user is not supposed to see or trace back to any kind of logged information from the previous session, Non- persistent mode must be used.

In order to clear/delete information that was stored before changing to Non-persistent mode, you should consider to factory reset the video system.

There is more information about performing a factory reset in the ► Factory resetting appendix.

When in Non-persistent mode, the following information will be lost/cleared each time the system restarts:

• System Configuration changes that have been made since the last system restart.

• Information about calls that are placed or received since the last system restart (call history).

• Internal log files that has been made since the last system restart.

• Changes that are made to the local contacts / favorites list since the last system restart.

• All IP related information (DHCP) from the last session.

Checking the persistency status

The radio buttons that are active when you open the Security page and go to the Non-persistent Mode tab, shows the current persistency status of the video system.

You can also see the status by checking Security >

Persistency on the Configuration > System Status page.

Navigate to: Configuration > Security: Non-persistent Mode tab

Changing the persistency settings

1. Set the persistency settings for the five categories as desired.

2. Click Save and reboot....

The system will restart. After the restart, behavior according to the new persistency settings will start.

Note that logs, configurations etc. that was stored before you switch to Nonpersistent mode, will not be cleared or deleted.

Page 45

Cisco TelePresence MX700 and MX800 Administrator Guide

Contents

Introduction

Web interface

System settings

Setting passwords

Appendices

Web interface

Deleting trust lists (CUCM only)

The information on this page is only relevant for video systems that are registered to a Cisco Unified Communications Manager (CUCM).

The web interface can be used to delete existing trust lists (CTL and ITL) that are stored on the video system. Normally, you will not delete the old CTL and ITL files, but there are a few cases when you will need to delete them.

The trust lists’ fingerprints and an overview of the certificates in the lists are displayed on the web page. This information can be useful for troubleshooting.

For more information about CUCM and trust lists, read the Administering TC Endpoints on CUCM guide available on the Cisco web site.

Navigate to: Configuration > Security: CUCM tab

Page 46

Cisco TelePresence MX700 and MX800 Administrator Guide

Contents

Introduction

Web interface

System settings

Setting passwords

Appendices

Web interface

Troubleshooting

The troubleshooting page lists the status for some common sources of errors. The list may be different for different products and installations

Note that critical issues and errors are clearly marked in red color; warnings are yellow.

Navigate to: Diagnostics > Troubleshooting

Run diagnostics

Click Re-run diagnostics to make sure the information in the list is up-to-date.

Leave standby mode

This button is only visible when the system is in standby mode. If in standby mode, click Deactivate standby to wake up the system.

The messages shown in the illustration serve as examples. Your system may show other information.

Page 47

Cisco TelePresence MX700 and MX800 Administrator Guide

Contents

Introduction

Web interface

System settings

Setting passwords

Appendices

Web interface

Downloading log files

The log files* are Cisco specific debug files which may be requested by the Cisco support organization if you need technical support.

The current log files are time stamped event log files.

All current log files are archived in a time stamped historical log file each time the system restarts. If the maximum number of historical log files is reached, the oldest one will be overwritten.

Navigate to: Diagnostics > Log Files

Downloading all log files

Click Download logs archive and follow the instructions.

Use the drop down list if you want to include the call history in the archive. You can choose whether to include the full call history or to make the caller/ callee anonymous.

Open/save one log file

Click the file name to open the log file in the web browser; right click to save the file on the computer.

The log files shown in the illustration serve as examples. Your system may have other files.

Refresh the list of log files

Page 48

Cisco TelePresence MX700 and MX800 Administrator Guide

Contents

Introduction

Web interface

System settings

Setting passwords

Appendices

Web interface

Starting extended logging

Extended logging mode may be switched on to help diagnose network issues and problems during call setup. While in this mode more information is stored in the log files.

Note that extended logging uses more of your video system’s resources, and may cause your video system to underperform. You should only use extended logging mode when troubleshooting an issue.

Navigate to: Diagnostics > Log Files

Start extended logging

Click Start extended logging.

Extended logging lasts for 10 minutes. You can stop the extended logging before it times out by clicking the Stop extended logging button that appears when extended logging is on.

As default, the network traffic is not captured. Use the drop down menu if you want to include a full or partial capture of the network traffic.

Page 49

Cisco TelePresence MX700 and MX800 Administrator Guide

Contents

Introduction

Web interface

System settings

Setting passwords

Appendices

Web interface

Capturing screenshots

You can capture screenshots both of a Touch controller that is connected to the video system, and of the on-screen display (menus, indicators and messages on the main display).

Navigate to: Diagnostics > User Interface Screenshots

Capture a screenshot

Click Take screenshot of Touch Panel to capture a screenshot of the Touch controller, or click Take screenshot of OSD to capture a screenshot of the on-screen display.

The screenshot will display in the area below the buttons. Note that it can take up to 30 seconds before the screenshot is ready.

All captured snapshots are included in the list above the buttons. Click the screenshot ID to display the image.

Deleting screenshots

If you want to delete all screenshots, click Remove all.

To delete just one screenshot, click

button for that screenshot.

the

Page 50

Cisco TelePresence MX700 and MX800 Administrator Guide

Contents

Introduction

Web interface

System settings

Setting passwords

Appendices

Web interface

Upgrading the system software

This video conference system is using TC software. The version described in this document is TC7.2.

Contact your system administrator if you have questions about the software version.

Software release notes

For a complete overview of the news and changes, we recommend reading the Software Release Notes (TC7).

Go to: ► http://www.cisco.com/c/en/us/support/

collaboration-endpoints/telepresence-mx-series/tsdproducts-support-series-home.html

New software

For software download, go to the Cisco Download Software web page:

► http://www.cisco.com/cisco/software/navigator.html.

Then navigate to your product.

The format of the file name is “s52020tc7_2_0.pkg” (each software version has a unique file name).

Navigate to: Maintenance > Software Upgrade

Adding option keys

An option key is required to activate optional functionality. You may have several option keys in your system. If the keys are already installed, you can skip this point and continue with the software installation.

If you do not have the required key(s), contact your Cisco representative to obtain them.

i. Enter an Option Key in the appropriate text input field

and click Add.

If you have more than one option key, repeat this step for all keys.

Each system has unique keys, for example:

• 1R000-1-AA7A4A09

Installing new software

Download the appropriate software package from the Cisco Software Download web page (see link to the left) and store it on your local computer. This is a .pkg file.

i. Click Browse... and find the downloaded .pkg file that

contains the new software.

ii. Check the Upgrade automatically after upload check

box, then click Upload to start the installation process straight away.

Keep the check box unchecked if you want to upload the software now and do the installation later.

The complete installation may take up to 30minutes. You can follow the progress on the web page. The system restarts automatically after the installation.

You must sign in anew in order to continue working with the web interface after the restart.

Page 51

Cisco TelePresence MX700 and MX800 Administrator Guide

Contents

Introduction

Web interface

System settings

Setting passwords

Appendices

Web interface

Backup and restore

All the system settings, which are available on the System configuration page, can be listed on-screen or stored as a text file.

The text file can be loaded back onto the system, thereby restoring the configuration.

Navigate to: Maintenance > Backup and Restore

Backing up or showing the current configuration

Click Preview backup to display the current settings on-screen.

Click Take backup to store the configuration as a text file.

Restoring an earlier configuration

Click Browse... and find the file with the configuration you want to restore.

Click Restore to reconfigure the system as defined in the file.

Page 52

Cisco TelePresence MX700 and MX800 Administrator Guide

Contents

Introduction

Web interface

System settings

Setting passwords

Appendices

Web interface

Reverting to the previously used software version

If there is a severe problem with the video system, switching to the previously used software version may help solving the problem.

If the system has not been factory reset since the last software upgrade, the previously used software image still resides on the system; you do not have to download the software again.

Reverting to the previously used software version should only be done by a system administrator or in contact with Cisco technical support.

We strongly recommend that you backup your system’s log files and configuration before you swap to the other software image.

Navigate to: Maintenance > System Recovery: Backup tab and Software Recover y Swap tab

1. Backing up log files and system configuration

We recommend that you backup your system’s log files and configuration before you swap to the other software image.

Click Download Logs and Download

Configuration Backup and follow the

instructions to save the files on your computer.

2. Reverting to the previously used software version

1. Revert to the previously used software version by clicking Switch to software

TCx.y.z..., where x.y.z indicates the

software version.

2. Click Yes to confirm your choice, or

Cancel if you have changed your mind.

Wait while the system resets. The system will restart automatically when finished.

Page 53

Cisco TelePresence MX700 and MX800 Administrator Guide

Contents

Introduction

Web interface

System settings

Setting passwords

Appendices

Web interface

Factory reset

If there is a severe problem with the video system, the last resort may be to reset it to its default factory settings. Always consider reverting to the previously used software image before performing a factory reset. In many situations this will recover the system*.

A factory reset should only be performed by a system administrator or in contact with Cisco technical support.

When factory resetting the video system the following happens:

• The call logs will be deleted.

• Passwords will be reset to default.

• All system parameters will be reset to default values.

• All files that have been uploaded to the system will be deleted. This includes, but is not limited to, custom wallpapers, certificates and favorites list.

• The previous (inactive) software image will be deleted.

• Option keys will not be affected.

The system restarts automatically after the reset. It is using the same software image as before.

We strongly recommend that you backup your system’s log files and configuration before you perform a factory reset.

It is not possible to undo a factory reset.

Navigate to: Maintenance > System Recovery: Backup tab and Factory Reset tab

There is more information about performing a factory reset in the ► Factory resetting appendix.

Read about software swapping in the ► Reverting to the previously

used software version section.

1. Backing up log files and system configuration

We strongly recommend that you backup your system’s log files and configuration before you perform a factory reset; otherwise these data will be lost.

Click Download Logs and Download

Configuration Backup and follow the

instructions to save the files on your computer.

2. Performing a factory reset

Read the provided information carefully

before you click Perform a factory reset....

Click Yes to confirm your choice, or Cancel if you have changed your mind.

Wait while the system resets. The system will restart automatically when finished.

Page 54

Cisco TelePresence MX700 and MX800 Administrator Guide

Contents

Introduction

Web interface

System settings

Setting passwords

Appendices

Web interface

Remote support user

In cases where you need to diagnose problems on the video system you can create a remote support user.

The remote support user will be granted read access to the system and will have access to a limited set of commands that can aid troubleshooting.

You will need assistance from Cisco Technical Assistance Center (TAC) to acquire the password for the remote support user.

The remote support user should only be enabled for troubleshooting reasons when instructed by Ci s co TAC.

Navigate to: Maintenance > System Recovery: Remote Support User tab

Create remote support user

1. Open a case with Cisco TAC.

2. Click Create user.

3. Copy the text in the To ken field and send to Cisco TAC.

4. Cisco TAC will generate a password.

The remote support user is valid for seven days, or until it is deleted.

Delete remote support user

Click Delete user.

Page 55

Cisco TelePresence MX700 and MX800 Administrator Guide

Contents

Introduction

Web interface

System settings

Setting passwords

Appendices

Web interface

Restarting the system

The system can be shut down or restarted remotely using the web interface.

Navigate to: Maintenance > Restart

Restarting the system

Click Restart TelePresence device... to restart the system.

It will take a few minutes before the system is ready for use.

Shutting down the system

Click Shutdown TelePresence device... to shut down the system.

The system cannot be turned on again remotely; you must press its power button physically to turn it on.

Page 56

Cisco TelePresence MX700 and MX800 Administrator Guide

Contents

Introduction

Web interface

System settings

Setting passwords

Appendices

System settings

Chapter 3

System settings

Page 57

Cisco TelePresence MX700 and MX800 Administrator Guide

Contents

Introduction

Web interface

System settings

Setting passwords

Appendices

System settings

Overview of the system settings

In the following pages you will find a complete list of the system settings which are configured from the System

Configuration page on the web interface. The examples show

either the default value or an example of a value.

Open a web browser and enter the IP address of the video system then sign in.

To find the IP address (IPv4 orIPv6), open the

Settings System Information.

The Settings menu can be accessed from the drop down window that appears when you tap the contact information in the upper, left corner of the Touch controller.

menu on the Touch controller and tap

Audio settings ...................................................................... 60

Audio DefaultVolume..............................................................65

Audio Input HDMI [n] Level ..................................................... 60

Audio Input HDMI [n] Mode .................................................... 60

Audio Input HDMI [n] VideoAssociation MuteOnInactiveVideo

............................................................. 60

Audio Input HDMI [n] VideoAssociation VideoInputSource .... 60

Audio Input Line [1..4] Channel .............................................. 61

Audio Input Line [1..4] Equalizer ID ......................................... 60

Audio Input Line [1..4] Equalizer Mode ................................... 61

Audio Input Line [1..4] Level ................................................... 61

Audio Input Line [1..4] Mode................................................... 61

Audio Input Line [1..4] VideoAssociation MuteOnInactiveVideo

............................................................. 61

Audio Input Line [1..4] VideoAssociation VideoInputSource .. 61 Audio Input Microphone [1..8] EchoControl Dereverberation 62

Audio Input Microphone [1..8] EchoControl Mode ................. 62

Audio Input Microphone [1..8] EchoControl NoiseReduction . 62

Audio Input Microphone [1..8] Equalizer ID ............................. 62

Audio Input Microphone [1..8] Equalizer Mode ....................... 62

Audio Input Microphone [1..8] Level ....................................... 63

Audio Input Microphone [1..8] Mode ...................................... 63

Audio Input Microphone [1..8] Type........................................ 63

Audio Input Microphone [1..8] VideoAssociation

MuteOnInactiveVideo ............................................................. 62

Audio Input Microphone [1..8] VideoAssociation

VideoInputSource .................................................................. 62

Audio Microphones Mute Enabled ......................................... 64

Audio Output HDMI [2] Level .................................................. 63

Audio Output HDMI [2] Mode ................................................. 63

Audio Output Line [1..6] Channel ........................................... 63

Audio Output Line [1..6] Equalizer ID ...................................... 64

Audio Output Line [1..6] Equalizer Mode ................................ 64

Audio Output Line [1..6] Level ................................................ 64

Audio Output Line [1..6] Mode................................................ 64

Audio SoundsAndAlerts KeyTones Mode .............................. 64

Audio SoundsAndAlerts RingTone ......................................... 64

Audio SoundsAndAlerts RingVolume.....................................65

Cameras settings ................................................................. 66

Cameras Camera [1..7] Backlight ........................................... 66

Cameras Camera [1..7] Brightness Level ............................... 67

Cameras Camera [1..7] Brightness Mode .............................. 66

Cameras Camera [1..7] DHCP ................................................ 68

Cameras Camera [1..7] Gamma Level .................................... 67

Cameras Camera [1..7] Gamma Mode ................................... 67

Cameras Camera [1..7] IrSensor ............................................ 67

Cameras Camera [1..7] MotorMoveDetection ........................ 68

Cameras Camera [1..7] Whitebalance Level .......................... 68

Cameras Camera [1..7] Whitebalance Mode ......................... 68

Cameras Camera [n..7] Flip .................................................... 67

Cameras Camera [n..7] Focus Mode ..................................... 67

Cameras Camera [n..7] Mirror ................................................ 68

Cameras PowerLine Frequency ............................................. 66

Cameras SpeakerTrack Mode ................................................66

Cameras SpeakerTrack TrackingMode .................................. 66

Conference settings ............................................................ 69

Conference [1..1] ActiveControl Mode ................................... 69

Conference [1..1] AutoAnswer Delay ...................................... 69

Conference [1..1] AutoAnswer Mode ..................................... 69

Conference [1..1] AutoAnswer Mute ....................................... 69

Conference [1..1] CallProtocolIPStack .................................... 69

Conference [1..1] DefaultCall Rate .......................................... 70

Conference [1..1] DoNotDisturb DefaultTimeout .................... 70

Conference [1..1] Encryption Mode ........................................ 70

Conference [1..1] FarEndControl Mode .................................. 70

Conference [1..1] FarEndControl SignalCapability .................. 70

Conference [1..1] IncomingMultisiteCall Mode ....................... 72

Conference [1..1] MaxReceiveCallRate .................................. 71

Conference [1..1] MaxTotalReceiveCallRate ........................... 71

Conference [1..1] MaxTotalTransmitCallRate .......................... 71

Conference [1..1] MaxTransmitCallRate .................................. 71

Conference [1..1] MicUnmuteOnDisconnect Mode ................ 70

Conference [1..1] Multipoint Mode ......................................... 72

Conference [1..1] Presentation OnPlacedOnHold .................. 72

Conference [1..1] Presentation RelayQuality .......................... 72

Page 58

Cisco TelePresence MX700 and MX800 Administrator Guide

Contents

Introduction

Web interface

System settings

Setting passwords

Appendices

System settings

Conference [1..1] VideoBandwidth MainChannel Weight ....... 71

Conference [1..1] VideoBandwidth Mode ............................... 71

Conference [1..1] VideoBandwidth PresentationChannel

Weight .................................................................................... 72

FacilityService settings ........................................................ 73

FacilityService Service [1..5] CallType ................................... 73

FacilityService Ser vice [1..5] Name ....................................... 73

FacilityService Ser vice [1..5] Number .................................... 73

FacilityService Service [1..5] Type ......................................... 73

GPIO settings ....................................................................... 74

GPIO Pin [1..4] Mode .............................................................. 74

H323 settings ....................................................................... 75

H323 NAT Address ................................................................ 75

H323 NAT Mode .................................................................... 75

H323 Profile [1..1] Authentication LoginName ........................ 75

H323 Profile [1..1] Authentication Mode ................................. 75

H323 Profile [1..1] Authentication Password .......................... 76

H323 Profile [1..1] CallSetup Mode ......................................... 76

H323 Profile [1..1] Encryption MinKeySize ............................. 76

H323 Profile [1..1] Gatekeeper Address ................................. 76

H323 Profile [1..1] Gatekeeper Discovery ............................... 76

H323 Profile [1..1] H323Alias E164 ......................................... 76

H323 Profile [1..1] H323Alias ID .............................................. 77

H323 Profile [1..1] PortAllocation ............................................ 77

Logging settings .................................................................. 78

Logging Mode ........................................................................ 78

Network settings .................................................................. 79

Network [1..1] DHCP RequestTFTPServerAddress ................ 80

Network [1..1] DNS Domain Name .......................................... 80

Network [1..1] DNS Server [1..3] Address ............................... 80

Network [1..1] IEEE8021X AnonymousIdentity ........................ 83

Network [1..1] IEEE8021X Eap Md5 ........................................ 83

Network [1..1] IEEE8021X Eap Peap ....................................... 84

Network [1..1] IEEE8021X Eap Tls ........................................... 84

Network [1..1] IEEE8021X Eap Ttls .......................................... 84

Network [1..1] IEEE8021X Identity ........................................... 83

Network [1..1] IEEE8021X Mode ............................................. 82

Network [1..1] IEEE8021X Password ....................................... 83

Network [1..1] IEEE8021X TlsVerify ......................................... 83

Network [1..1] IEEE8021X UseClientCertificate ...................... 83

Network [1..1] IPStack ............................................................. 79

Network [1..1] IPv4 Address ................................................... 79

Network [1..1] IPv4 Assignment .............................................. 79

Network [1..1] IPv4 Gateway ................................................... 79

Network [1..1] IPv4 SubnetMask ............................................. 79

Network [1..1] IPv6 Address ................................................... 80

Network [1..1] IPv6 Assignment .............................................. 79

Network [1..1] IPv6 DHCPOptions .......................................... 80

Network [1..1] IPv6 Gateway ................................................... 80

Network [1..1] MTU ................................................................. 84

Network [1..1] QoS Diffserv Audio .......................................... 81

Network [1..1] QoS Diffserv Data ............................................ 81

Network [1..1] QoS Diffserv ICMPv6 ...................................... 82

Network [1..1] QoS Diffserv NTP ............................................ 82

Network [1..1] QoS Diffserv Signalling .................................... 82

Network [1..1] QoS Diffserv Video .......................................... 81

Network [1..1] QoS Mode ....................................................... 81

Network [1..1] RemoteAccess Allow ....................................... 85

Network [1..1] Speed .............................................................. 84

Network [1..1] TrafficControl Mode ......................................... 84

Network [1..1] VLAN Voice Mode ........................................... 85

Network [1..1] VLAN Voice VlanId........................................... 85

NetworkServices settings .................................................... 86

NetworkServices CTMS Encryption ...................................... 89

NetworkServices CTMS Mode .............................................. 89

NetworkServices H323 Mode ............................................... 86

NetworkServices HTTP Mode ............................................... 86

NetworkServices HTTPS Mode ............................................. 87

NetworkServices HTTPS OCSP Mode .................................. 87

NetworkServices HTTPS OCSP URL .................................... 87

NetworkServices HTTPS VerifyClientCertificate ................... 87

NetworkServices HTTPS VerifyServerCertificate ................. 87

NetworkServices Medianet Metadata ................................... 87

NetworkServices NTP Address ............................................. 88

NetworkServices NTP Mode ................................................. 88

NetworkServices SIP Mode ................................................... 86

NetworkServices SNMP CommunityName ........................... 88

NetworkServices SNMP Host [1..3] Address ......................... 88

NetworkServices SNMP Mode .............................................. 88

NetworkServices SNMP SystemContact ..............................89

NetworkServices SNMP SystemLocation .............................89

NetworkServices SSH AllowPublicKey .................................. 89

NetworkServices SSH Mode ................................................. 89

NetworkServices Telnet Mode .............................................. 86

NetworkServices WelcomeText ............................................. 86

NetworkServices XMLAPI Mode ........................................... 86

Peripherals settings ............................................................. 90

Peripherals Pairing CiscoTouchPanels RemotePairing .......... 90

Peripherals Profile TouchPanels ............................................ 90

Phonebook settings ............................................................. 91

Phonebook Server [1..1] ID ..................................................... 91

Phonebook Server [1..1] Type ................................................ 91

Phonebook Server [1..1] URL ................................................. 91

Provisioning settings ............................................................ 92

Provisioning Connectivity ...................................................... 92

Provisioning ExternalManager Address ................................. 93

Provisioning ExternalManager AlternateAddress...................93

Provisioning ExternalManager Domain .................................. 93

Provisioning ExternalManager Path .......................................93

Provisioning ExternalManager Protocol .................................93

Provisioning HttpMethod .......................................................92

Provisioning LoginName ........................................................ 92

Provisioning Mode ................................................................. 92

Provisioning Password ........................................................... 92

RTP settings ......................................................................... 94

RTP Ports Range Start ........................................................... 94

RTP Ports Range Stop ........................................................... 94

Security settings .................................................................. 95

Security Audit Logging Mode ................................................ 95

Security Audit OnError Action ................................................ 95

Security Audit Server Address .............................................. 95

Security Audit Server Port ..................................................... 95

Security Audit Server PortAssignment .................................. 95

Security Session InactivityTimeout ........................................ 96

Security Session ShowLastLogon ......................................... 96

Page 59

Cisco TelePresence MX700 and MX800 Administrator Guide

Contents

Introduction

Web interface

System settings

Setting passwords

Appendices

System settings

SerialPort settings ............................................................... 97

SerialPort BaudRate ............................................................... 97

SerialPort LoginRequired ....................................................... 97

SerialPort Mode ..................................................................... 97

SIP settings .......................................................................... 98

SIP ANAT ...............................................................................98

SIP AuthenticateTransferror ...................................................98

SIP ListenPort ........................................................................ 98

SIP OCSP DefaultResponder ................................................. 98

SIP OCSP Mode.....................................................................98

SIP PreferredIPMedia ............................................................. 98

SIP PreferredIPSignaling ........................................................ 98

SIP Profile [1..1] Authentication [1..1] LoginName ................. 100

SIP Profile [1..1] Authentication [1..1] Password .................... 10 0

SIP Profile [1..1] DefaultTransport ......................................... 100

SIP Profile [1..1] DisplayName............................................... 100

SIP Profile [1..1] Ice DefaultCandidate .................................... 99

SIP Profile [1..1] Ice Mode ....................................................... 99

SIP Profile [1..1] Line ............................................................. 101

SIP Profile [1..1] Mailbox ....................................................... 101

SIP Profile [1..1] Outbound .................................................... 101

SIP Profile [1..1] Proxy [1..4] Address .................................... 101

SIP Profile [1..1] Proxy [1..4] Discovery ................................. 101

SIP Profile [1..1] TlsVerify ...................................................... 100

SIP Profile [1..1] Turn BandwidthProbe ................................... 99

SIP Profile [1..1] Turn DiscoverMode ...................................... 99

SIP Profile [1..1] Turn DropRflx ................................................ 99

SIP Profile [1..1] Turn Password ............................................ 100

SIP Profile [1..1] Turn Ser ver ................................................... 99

SIP Profile [1..1] Turn UserName ............................................ 99

SIP Profile [1..1] Type ............................................................ 101

SIP Profile [1..1] URI .............................................................. 10 0

Standby settings ................................................................ 102

Standby BootAction ............................................................. 102

Standby Control ................................................................... 102

Standby Delay ...................................................................... 102

Standby StandbyAction ....................................................... 102

Standby WakeupAction ........................................................ 102

SystemUnit settings ........................................................... 103

SystemUnit CallLogging Mode ............................................ 103

SystemUnit ContactInfo Type ..............................................103

SystemUnit IrSensor ............................................................ 103

SystemUnit MenuLanguage ................................................. 10 3

SystemUnit Name ................................................................ 103

Time settings ..................................................................... 104

Time DateFormat ................................................................. 104

Time OlsonZone ..................................................................105

Time TimeFormat ................................................................. 104

Time Zone ............................................................................ 104

UserInterface settings ........................................................ 107

UserInterface Language ...................................................... 107

UserInterface OSD EncryptionIndicator ............................... 107

UserInterface OSD LanguageSelection ............................... 107

UserInterface OSD LoginRequired....................................... 107

UserInterface OSD Output ................................................... 107

UserInterface TouchPanel DefaultPanel .............................. 108

UserInterface UserPreferences ........................................... 108

UserInterface Wallpaper ...................................................... 107

Video settings .................................................................... 109

Video AllowWebSnapshots .................................................. 109

Video CamCtrlPip CallSetup Duration ................................. 109

Video CamCtrlPip CallSetup Mode ...................................... 10 9

Video DefaultPresentationSource ........................................ 109

Video Input Connector [1..4] PresentationSelection .............111

Video Input Connector [1..4] RGBQuantizationRange ...........112

Video Input Connector [1..5] CameraControl CameraId .......110

Video Input Connector [1..5] CameraControl Mode ..............110

Video Input Connector [1..5] InputSourceType .................... 109

Video Input Connector [1..5] Name ...................................... 109

Video Input Connector [1..5] OptimalDefinition Profile ..........111

Video Input Connector [1..5] OptimalDefinition Threshold60fps

Video Input Connector [1..5] Quality .....................................110

Video Input Connector [1..5] Visibility ...................................110

Video Input Connector [4] DviType .......................................112

.....................................................................111

Video Input Connector [5] SignalType ..................................112

Video Layout DisableDisconnectedLocalOutputs .................112

Video Layout LocalLayoutFamily ..........................................113

Video Layout PresentationDefault View ................................113

Video Layout RemoteLayoutFamily .......................................113

Video Layout ScaleToFrame .................................................114

Video Layout ScaleToFrameThreshold ..................................114

Video Layout Scaling ............................................................113

Video Monitors ......................................................................116

Video OSD EncryptionIndicator ............................................116

Video OSD LanguageSelection ............................................116

Video OSD LoginRequired ....................................................116

Video Output Connector [1..3] Location HorizontalOffset .....117

Video Output Connector [1..3] Location VerticalOffset .........117

Video Output Connector [2] CEC Mode ................................116

Video Output Connector [n] Resolution ................................118

Video Output Connector [n] RGBQuantizatonRange .............118

Video PIP ActiveSpeaker DefaultValue Position ...................114

Video PIP Presentation DefaultValue Position ......................114

Video SelfviewDefault FullscreenMode ................................11 5

Video SelfviewDefault Mode .................................................115

Video SelfviewDefault OnMonitorRole ..................................115

Video SelfviewDefault PIPPosition ........................................115

Video WallPaper....................................................................118

Experimental settings .........................................................119

Page 60

Cisco TelePresence MX700 and MX800 Administrator Guide

Contents

Introduction

Web interface

System settings

Setting passwords

Appendices

System settings

Audio settings

Audio Input HDMI [n] Mode

This setting applies to HDMI [2..3] for single camera systems, and to HDMI [3] for dual camera systems.

Determine if the audio channels on the HDMI input shall be enabled. The HDMI input has two audio channels.

Requires user role: ADMIN

Value space: <Off/On>

Off: Disable audio on the HDMI input. On: Enable audio on the HDMI input.

Example:

Audio Input HDMI 3 Mode: On

Audio Input HDMI [n] Level

This setting applies to HDMI [2..3] for single camera systems, and to HDMI [3] for dual camera systems.

Define the audio level of the HDMI input connector, in steps of 1 dB. See the Audio Level tables in the Physical Interfaces Guide for the codec for a complete

overview of the menu values represented in dB.

Requires user role: ADMIN

Value space: <-24.. 0 >

Range: Select a value from -24 to 0 dB.

Example:

Audio Input HDMI 3 Level: 0

Audio Input HDMI [n] VideoAssociation MuteOnInactiveVideo

This setting applies to HDMI [2..3] for single camera systems, and to HDMI [3] for dual camera systems.

Enable association of a video source to an HDMI audio input.

Requires user role: ADMIN

Value space: <Off/On>

Off: No video source is associated. On: A video source is associated, and the audio will be muted if the associated video source

is not displayed.

Example:

Audio Input HDMI 3 VideoAssociation MuteOnInactiveVideo: Off

Audio Input HDMI [n] VideoAssociation VideoInputSource

This setting applies to HDMI [2..3] for single camera systems, and to HDMI [3] for dual camera systems.

Select the associated video input source.

Requires user role: ADMIN

Value space: <1/2/ 3/4>

Range: Select one of the video input sources.

Example:

Audio Input HDMI 3 VideoAssociation VideoInputSource: 1

Audio Input Line [1..4] Equalizer ID

Select the audio input line equalizer ID.

Requires user role: ADMIN

Value space: <1.. 8>

Range: Select EqualizerID 1 to 8.

Example:

Audio Input Line 1 Equalizer ID: 1

Page 61

Cisco TelePresence MX700 and MX800 Administrator Guide

Contents

Introduction

Web interface

System settings

Setting passwords

Appendices

System settings

Audio Input Line [1..4] Equalizer Mode

Set the audio input line equalizer mode.

Requires user role: ADMIN

Value space: <Off/On>

Off: No equalizer. On: Enable the equalizer for the audio input line.

Example:

Audio Input Line 1 Equalizer Mode: Off

Audio Input Line [1..4] VideoAssociation MuteOnInactiveVideo

Enable association of a video source to a Line audio input.

Requires user role: ADMIN

Value space: <Off/On>

Off: No video source is associated. On: A video source is associated, and the audio will be muted if the associated video source

is not displayed.

Example:

Audio Input Line 1 VideoAssociation MuteOnInactiveVideo: Off

Audio Input Line [1..4] VideoAssociation VideoInputSource

Select the associated video input source.

Requires user role: ADMIN

Value space: <1/2/ 3>

Range: Select one of the video input sources.

Example:

Audio Input Line 1 VideoAssociation VideoInputSource: 1

Audio Input Line [1..4] Channel

Define whether the Audio Line input is a mono signal or part of a multichannel signal.

Requires user role: ADMIN

Value space: <Right/Left/Mono>

Right: The Audio Line input signal is the right channel of a stereo signal. Left: The Audio Line input signal is the left channel of a stereo signal. Mono: The Audio Line input signal is a mono signal.

Example:

Audio Input 1 Channel: Left

Audio Input Line [1..4] Level

Define the audio level of the Line input connector, in steps of 1 dB. See the Audio Level tables in the Physical Interfaces Guide for the codec for a complete

overview of the menu values represented in dB.

Requires user role: ADMIN

Value space: <0..24>

Range: Select a value from 0 to 24 dB.

Example:

Audio Input Line 1 Level: 10

Audio Input Line [1..4] Mode

Set the audio input line mode.

Requires user role: ADMIN

Value space: <Off/On>

Off: Disable the Audio Line input. On: Enable the Audio Line input.

Example:

Audio Input Line 1 Mode: On

Page 62

Cisco TelePresence MX700 and MX800 Administrator Guide

Contents

Introduction

Web interface

System settings

Setting passwords

Appendices

System settings

Audio Input Microphone [1..8] EchoControl Mode

The echo canceller continuously adjusts itself to the audio characteristics of the room and compensate for any changes it detects in the audio environment. If the changes in the audio conditions are very significant the echo canceller may take a second or two to re-adjust.

Audio Input Microphone [1..8] VideoAssociation VideoInputSource

Select the associated video input source.

Requires user role: ADMIN

Value space: <1/2/ 3>

Range: Select one of the video input sources.

Example:

Audio Input Microphone 1 VideoAssociation VideoInputSource: 1

Page 63

Cisco TelePresence MX700 and MX800 Administrator Guide

Contents

Introduction

Web interface

System settings

Setting passwords

Appendices

System settings

Audio Input Microphone [1..8] Level

Define the audio level of the Microphone input connector, in steps of 1dB. See the Audio Level tables in the Physical Interfaces Guide for the codec for a complete

overview of the menu values represented in dB.

Requires user role: ADMIN

Value space: <0..70>

Range: Select a value between 0 and 70 dB.

Example:

Audio Input Microphone 1 Level: 58

This setting only applies to MX800. Determine if the audio channel on the HDMI output connector shall be enabled.

Requires user role: ADMIN

Value space: <Off/On>

Off: Disable the audio channel on the HDMI output. On: Enable the audio channel on the HDMI output.

Example:

Audio Output HDMI 2 Mode: Off

Audio Output Line [1..6] Channel

Define whether the Audio Line output is a mono signal or part of a multichannel signal.

Requires user role: ADMIN

Value space: <Right/Left/Mono>

Right: The Audio Line output signal is the right channel of a stereo signal. Left: The Audio Line output signal is the left channel of a stereo signal. Mono: The Audio Line output signal is a mono signal.

Example:

Audio Output Line 1 Channel: left

Page 64

Cisco TelePresence MX700 and MX800 Administrator Guide

Contents

Introduction

Web interface

System settings

Setting passwords

Appendices

System settings

Audio Output Line [1..6] Equalizer ID

Select the audio output line equalizer ID.

Requires user role: ADMIN

Value space: <1.. 8>

Range: Select EqualizerID 1 to 8.

Example:

Audio Output Line 1 Equalizer ID: 1

Audio Output Line [1..6] Equalizer Mode

Set the audio output line equalizer mode.

Requires user role: ADMIN

Value space: <Off/On>

Off: No equalizer. On: Enable the equalizer for the audio output line.

Example:

Audio Output Line 1 Equalizer Mode: Off

Audio Output Line [1..6] Level

Define the output level of the Audio Output Line connector, in steps of 1 dB. See the Audio Level tables in the Physical Interfaces Guide for the codec for a complete

overview of the menu values represented in dB.

Requires user role: ADMIN

Value space: <-24.. 0 >

Range: Select a value from -24 to 0 dB.

Example:

Audio Output Line 1 Level: -10

Audio Output Line [1..6] Mode

Set the audio output line mode.

Requires user role: ADMIN

Value space: <Off/On>

Off: Disable the Audio Line output. On: Enable the Audio Line output.

Example:

Audio Output Line 1 Mode: On

Audio Microphones Mute Enabled

Determine whether audio-mute is allowed or not. The default value is True.

Requires user role: ADMIN

Value space: <True/InCallOnly>

Tru e: Muting of audio is always available. InCallOnly: Muting of audio is only available when the device is in a call. When Idle it is not

possible to mute the microphone. This is useful when an external telephone ser vice/audio system is connected via the codec and is to be available when the codec is not in a call. When set to InCallOnly this will prevent the audio-system from being muted by mistake.

Example:

Audio Microphones Mute Enabled: True

Audio SoundsAndAlerts KeyTones Mode

The system can be configured to make a keyboard click sound effect (key tone) when typing text or numbers on the Touch controller.

Requires user role: USER

Value space: <Off/On>

Off: No key tones will be played when you type. On: You will hear key tones when you type.

Example:

Audio SoundsAndAlerts KeyTones Mode: Off

Audio SoundsAndAlerts RingTone

This setting defines which ringtone to use for incoming calls. You need to enter the exact name of the ringtone. You can find the available ringtones the following ways.

Web interface: On the Configuration > Personalization page. Touch controller: On the Ringtone & Sound panel of the Settings menu. This panel is either

in the open part of the Settings menu, or included in the password protected Administrator menu. The UserInterface UserPreference setting defines which panels will be in the password protected area.

Requires user role: USER

Value space: <S: 1, 100>

Format: String with a maximum of 100 characters.

Example:

Audio SoundsAndAlerts RingTone: "Sunrise"

Page 65

Cisco TelePresence MX700 and MX800 Administrator Guide

Contents

Introduction

Web interface

System settings

Setting passwords

Appendices

System settings

Audio SoundsAndAlerts RingVolume

Sets the ring volume for an incoming call.

Requires user role: USER

Value space: <0..100>

Range: The value goes in steps of 5 from 0 to 100 (from -34.5 dB to 15 dB). Volume 0 = Off.

Example:

Audio SoundsAndAlerts RingVolume: 30

Audio DefaultVolume

Set the default speaker volume. The volume returns to this value when you switch on or restart the video system. Use the Touch controller to change the volume while the video system is running.

Requires user role: USER

Value space: <0..100>

Range: The value must be between 0 and 100. The values from 1 to 100 correspond to the range from -34.5 dB to 15 dB (0.5 dB steps). The value 0 means that the audio is switched off.

Example:

Audio DefaultVolu me: 50

Page 66

Cisco TelePresence MX700 and MX800 Administrator Guide

Contents

Introduction

Web interface

System settings

Setting passwords

Appendices

System settings

Cameras settings

Cameras PowerLine Frequency

If your camera supports power line frequency anti-flickering, the camera is able to compensate for any flicker noise from the electrical power supply. You should set this camera configuration based on your power line frequency. If your camera supports auto detection of line frequency, you can select the Auto option in the configuration.

All Cisco Precision cameras support both anti-flickering and auto detection of line frequency. Auto is the default value, so you should change this setting if you have a camera that does not support auto detection.

Requires user role: ADMIN

Value space: <Auto/50Hz/60Hz>

Auto: Allow the camera to detect the power frequency automatically. 50Hz: Use this value when the power line frequency is 50 Hz. 60Hz: Use this value when the power line frequency is 60 Hz.

Example:

Cameras PowerLine Frequency: Auto

Cameras SpeakerTrack Mode

This setting applies only when using a Cisco TelePresence SpeakerTrack 60 camera. The SpeakerTrack 60 camera assembly consists of two cameras and uses an audio tracking

technique that finds and captures a close-up of the active speaker. When a change of speaker is detected, the system can switch automatically between the two cameras to always show the best camera view. Refer to the Cameras SpeakerTrack TrackingMode setting for different switching modes.

Requires user role: USER

Value space: <Auto/Off>

Auto: Speaker tracking is switched on. The cameras in the camera assembly behave as one integrated unit that finds the active speaker and dynamically chooses the best camera view.

Off: The cameras operate as two individual cameras. Speaker tracking is not used.

Example:

Cameras SpeakerTrack Mode: Auto

Cameras SpeakerTrack TrackingMode

This setting applies only when using a Cisco TelePresence SpeakerTrack 60 camera, and when Cameras SpeakerTrack Mode is set to Auto.

Speaker tracking can operate in two modes: Fast tracking mode and Normal tracking mode. The tracking algorithm reacts faster to detected changes in Fast tracking mode, thus the camera view will change to a new speaker faster in this mode.

Requires user role: USER

Value space: <Default/Fast>

Default: Normal tracking mode. Fast: Fast tracking mode.

Example:

Cameras SpeakerTrack TrackingMode: Default

Cameras Camera [1..7] Backlight

This configuration turns backlight compensation on or off. Backlight compensation is useful when there is much light behind the persons in the room. Without compensation the persons will easily appear very dark to the far end.

Requires user role: ADMIN

Value space: <Off/On>

Off: Turn off the camera backlight compensation. On: Turn on the camera backlight compensation.

Example:

Cameras Camera 1 Backlight: Off

Cameras Camera [1..7] Brightness Mode

Set the camera brightness mode.

Requires user role: ADMIN

Value space: <Auto/Manual>

Auto: The camera brightness is automatically set by the system. Manual: Enable manual control of the camera brightness. The brightness level is set using

the Cameras Camera Brightness Level setting.

Example:

Cameras Camera 1 Brightness Mode: Auto

Page 67

Cisco TelePresence MX700 and MX800 Administrator Guide

Contents

Introduction

Web interface

System settings

Setting passwords

Appendices

System settings

Cameras Camera [1..7] Brightness Level

Set the brightness level. Requires the Camera Brightness Mode to be set to Manual.

Requires user role: ADMIN

Value space: <1..31>

Range: Select a value from 1 to 31.

Example:

Cameras Camera 1 Brightness Level: 20

Cameras Camera [n..7] Flip

This setting applies to Camera [2..7] for single camera systems, and to HDMI [3..7] for dual camera systems.

With Flip mode (vertical flip) you can flip the image upside down.

Requires user role: ADMIN

Value space: <Auto/Off/On>

Auto: When the camera is placed upside down the image is automatically flipped upside down. This setting will only take effect for a camera that automatically detects which way it is mounted.

Off: Display the video on screen the normal way. On: When enabled the video on screen is flipped. This setting is used when a camera is

mounted upside down, but cannot automatically detect which way it is mounted.

Example:

Cameras Camera 3 Flip: Auto

Cameras Camera [n..7] Focus Mode

This setting applies to Camera [2..7] for single camera systems, and to HDMI [3..7] for dual camera systems.

Set the camera focus mode.

Requires user role: ADMIN

Value space: <Auto/Manual>

Auto: The camera will auto focus once a call is connected, as well as after moving the camera (pan, tilt, zoom). The system will use auto focus only for a few seconds to set the right focus; then auto focus is turned off to prevent continuous focus adjustments of the camera.

Manual: Turn the autofocus off and adjust the camera focus manually.

Example:

Cameras Camera 3 Focus Mode: Auto

Cameras Camera [1..7] Gamma Mode

This setting enables gamma corrections, and applies only to cameras which support gamma mode. Gamma describes the nonlinear relationship between image pixels and monitor brightness.

Requires user role: ADMIN

Value space: <Auto/Manual>

Auto: Auto is the default and the recommended setting. Manual: In manual mode the gamma value is changed with the gamma level setting, ref:

Cameras Camera [1..n] Gamma Level.

Example:

Cameras Camera 1 Gamma Mode: Auto

Cameras Camera [1..7] Gamma Level

By setting the Gamma Level you can select which gamma correction table to use. This setting may be useful in difficult lighting conditions, where changes to the brightness setting does not provide satisfactory results. Requires the Gamma Mode to be set to Manual.

Requires user role: ADMIN

Value space: <0..7>

Range: Select a value from 0 to 7.

Example:

Cameras Camera 1 Gamma Level: 0

Cameras Camera [1..7] IrSensor

Not applicable in this version.

Page 68

Cisco TelePresence MX700 and MX800 Administrator Guide

Contents

Introduction

Web interface

System settings

Setting passwords

Appendices

System settings

Cameras Camera [n..7] Mirror

This setting applies to Camera [2..7] for single camera systems, and to HDMI [3..7] for dual camera systems.

With Mirror mode (horizontal flip) you can mirror the image on screen.

Requires user role: ADMIN

Value space: <Auto/Off/On>

Auto: When the camera is placed upside down the image is automatically mirrored. Use this setting with cameras that can be mounted upside down, and that can auto detect that the camera is mounted upside down.

Off: See the self-view in normal mode, that is the experience of self-view is as seeing yourself as other people see you.

On: See the self-view in mirror mode, that is the self-view is reversed and the experience of self-view is as seeing yourself in a mirror.

Example:

Cameras Camera 3 Mirror: Auto

Cameras Camera [1..7] MotorMoveDetection

This setting applies only when using a Cisco TelePresence PrecisionHD 1080p12x camera. If adjusting the camera position by hand you can configure whether the camera should keep its

new position or return to the preset or position it had before.

Requires user role: ADMIN

Value space: <Off/On>

Off: When the camera position is adjusted manually the camera will keep this position until adjusted again. WARNING: If moving the camera by hand, the camera will not register the new pan and tilt values since there is no position feedback. This will result in wrong pan and tilt values when recalling the camera presets subsequently.

On: When the camera position is adjusted manually, or the camera detects that the motors have moved, it will first re-initialize (i.e. go to default position) then return to the preset/ position it had before the camera was adjusted.

Example:

Cameras Camera 1 MotorMoveDetection: Off

Cameras Camera [1..7] Whitebalance Mode

Set the camera white balance mode.

Requires user role: ADMIN

Value space: <Auto/Manual>

Auto: The camera will continuously adjust the white balance depending on the camera view. Manual: Enables manual control of the camera white balance. The white balance level is set

using the Cameras Camera Whitebalance Level setting.

Example:

Cameras Camera 1 Whitebalance Mode: Auto

Cameras Camera [1..7] Whitebalance Level

Set the white balance level. Requires the Camera Whitebalance Mode to be set to manual.

Requires user role: ADMIN

Value space: <1..16>

Range: Select a value from 1 to 16.

Example:

Cameras Camera 1 Whitebalance Level: 1

Cameras Camera [1..7] DHCP

Not applicable for this product.

Page 69

Cisco TelePresence MX700 and MX800 Administrator Guide

Contents

Introduction

Web interface

System settings

Setting passwords

Appendices

System settings

Conference settings

Conference [1..1] ActiveControl Mode

Active control is a feature that allows conference participants to administer a conference on Cisco TelePresence Server using the video system's interfaces. Each user can see the participant list, change video layout, disconnect participants, etc. from the interface. The active control feature is enabled by default, provided that it is supported by the infrastructure (Cisco Unified Communications Manager (CUCM) version 9.1.2 or newer, Cisco TelePresence Video Communication Server (VCS) version X8.1 or newer). Change this setting if you want to disable the active control features.

Requires user role: ADMIN

Value space: <Auto/Off>

Auto: Active control is enabled when supported by the infrastructure. Off: Active control is disabled.

Example:

Conference ActiveControl Mode: Auto

Conference [1..1] CallProtocolIPStack

Select if the system should enable IPv4, IPv6, or dual IP stack on the call protocol (SIP, H323).

Requires user role: ADMIN

Value space: <Dual/IPv4/IPv6>

Dual: Enables both IPv4 and IPv6 for the call protocol. IPv4: When set to IPv4, the call protocol will use IPv4. IPv6: When set to IPv6, the call protocol will use IPv6.

Example:

Conference 1 CallProtocolIPStack: Dual

Conference [1..1] AutoAnswer Mode

Set the auto answer mode. Use the Conference AutoAnswer Delay setting if you want the system to wait a number of seconds before answering the call, and use the Conference AutoAnswer Mute setting if you want your microphone to be muted when the call is answered.

Requires user role: ADMIN

Value space: <Off/On>

Off: You must answer incomming calls manually by tapping Answer on the Touch controller. On: The system automatically answers incoming calls, except if you are already in a call. You

must always answer or decline incoming calls manually when you are already engaged in a call.

Example:

Conference 1 AutoAnswer Mode: Off

Conference [1..1] AutoAnswer Mute

Determine if the microphone shall be muted when an incoming call is automatically answered. Requires that AutoAnswer Mode is switched on.

Requires user role: ADMIN

Value space: <Off/On>

Off: The incoming call will not be muted. On: The incoming call will be muted when automatically answered.

Example:

Conference 1 AutoAnswer Mute: Off

Conference [1..1] AutoAnswer Delay

Define how long (in seconds) an incoming call has to wait before it is answered automatically by the system. Requires that AutoAnswer Mode is switched on.

Requires user role: ADMIN

Value space: <0..50>

Range: Select a value from 0 to 50 seconds.

Example:

Conference 1 AutoAnswer Delay: 0

Page 70

Cisco TelePresence MX700 and MX800 Administrator Guide

Contents

Introduction

Web interface

System settings

Setting passwords

Appendices

System settings

Conference [1..1] MicUnmuteOnDisconnect Mode

Determine if the microphones shall be unmuted automatically when all calls are disconnected. In a meeting room or other shared resources this may be done to prepare the system for the ne x t user.

Requires user role: ADMIN

Value space: <Off/On>

Off: If muted during a call, let the microphones remain muted after the call is disconnected. On: Unmute the microphones after the call is disconnected.

Example:

Conference 1 MicUnmuteOnDisconnect Mode: On

Conference [1..1] DoNotDisturb DefaultTimeout

This setting determines the default duration of a Do Not Disturb session, i.e. the period when incoming calls are rejected and registered as missed calls. The session can be terminated earlier by using the user interface (Touch controller). The default value is 60 minutes.

Requires user role: ADMIN

Value space: <0..1440>

Range: Select the number of minutes (between 0 and 1440, i.e. 24 hours) before the Do Not Disturb session times out automatically.

Example:

Conference 1 DoNotDisturb DefaultTimeOut: 60

Conference [1..1] FarEndControl Mode

Lets you decide if the remote side (far end) should be allowed to select your video sources and control your local camera (pan, tilt, zoom).

Requires user role: ADMIN

Value space: <Off/On>

Off: The far end is not allowed to select your video sources or to control your local camera (pan, tilt, zoom).

On: Allows the far end to be able to select your video sources and control your local camera (pan, tilt, zoom). You will still be able to control your camera and select your video sources as normal.

Example:

Conference 1 FarEndControl Mode: On

Conference [1..1] FarEndControl SignalCapability

Set the far end control (H.224) signal capability mode.

Requires user role: ADMIN

Value space: <Off/On>

Off: Disable the far end control signal capability. On: Enable the far end control signal capability.

Example:

Conference 1 FarEndControl SignalCapability: On

Conference [1..1] Encryption Mode

Set the conference encr yption mode. A padlock with the text "Encryption On" or "Encryption Off" displays on screen for a few seconds when the conference starts.

NOTE: Requires the Encryption Option Key to be installed. When the Encryption Option Key is not installed the encryption mode is set to Off.

Requires user role: ADMIN

Value space: <Off/On/BestEffort>

Off: The system will not use encryption. On: The system will only allow calls that are encrypted. BestEffort: The system will use encryption whenever possible. > In Point to point calls: If the far end system supports encr yption (AES-128), the call will be

encrypted. If not, the call will proceed without encryption. > In MultiSite calls: In order to have encrypted MultiSite conferences, all sites must support

encryption. If not, the conference will be unencrypted.

Example:

Conference 1 Encryption Mode: BestEffort

Conference [1..1] DefaultCall Rate

Set the Default Call Rate to be used when placing calls from the system.

Requires user role: ADMIN

Value space: <64..6000>

Range: Select a value between 64 and 6000 kbps.

Example:

Conference 1 DefaultCall Rate: 1920

Page 71

Cisco TelePresence MX700 and MX800 Administrator Guide

Contents

Introduction

Web interface

System settings

Setting passwords

Appendices

System settings

Conference [1..1] MaxTransmitCallRate

Specify the maximum transmit bit rate to be used when placing or receiving calls. Note that this is the maximum bit rate for each individual call; use the Conference MaxTotalTransmitCallRate setting to set the aggregated maximum for all simultaneous active calls.

Requires user role: ADMIN

Value space: <64..6000>

Range: Select a value between 64 and 6000 kbps.

Example:

Set the conference video bandwidth mode.

Requires user role: ADMIN

Value space: <Dynamic/Static>

Dynamic: The available transmit bandwidth for the video channels are distributed among the currently active channels. If there is no presentation, the main video channels will use the bandwidth of the presentation channel.

Static: The available transmit bandwidth is assigned to each video channel, even if it is not active.

Example:

Conference 1 VideoBandwidth Mode: Dynamic

Conference [1..1] VideoBandwidth MainChannel Weight

The available transmit video bandwidth is distributed on the main channel and presentation channel according to "MainChannel Weight" and "PresentationChannel Weight". If the main channel weight is 2 and the presentation channel weight is 1, then the main channel will use twice as much bandwidth as the presentation channel.

Requires user role: ADMIN

Value space: <1..10 >

Range: 1 to 10.

Example:

Conference 1 VideoBandwidth MainChannel Weight: 5

Page 72

Cisco TelePresence MX700 and MX800 Administrator Guide

Contents

Introduction

Web interface

System settings

Setting passwords

Appendices

Define how the video system handles multiparty video conferences. If registered to a Cisco TelePresence Video Communication Server (VCS), the video system

can use its built-in MultiSite feature. If registered to a Cisco Unified Communications Manager (CUCM) version 8.6.2 or newer, the video system can use either the CUCM conference bridge, or the video system's built-in MultiSite feature. Which one to use is set-up by CUCM. The CUCM conference bridge allows you to set up conferences with many participants; MultiSite allows up to five participants (yourself included).

Note that the built-in MultiSite feature is optional and may not be available on all video systems.

Requires user role: ADMIN

Value space: <Auto/Off/MultiSite/CUCMMediaResourceGroupList>

Auto: The multipoint method available will be choosen automatically; if none are available the Multipoint Mode will automatically be set to Off.

Off: Multiparty conferences are not allowed. MultiSite: Multiparty conferences are set up using the built-in MultiSite feature. If MultiSite is

chosen when the MultiSite feature is not available, the Multipoint Mode will automatically be set to Off.

CUCMMediaResourceGroupList: Multiparty conferences (ad hoc conferences) are hosted by the CUCM configured conference bridge. This setting is provisioned by CUCM in a CUCM environment and should never be set manually by the user.

Example:

Conference 1 Multipoint Mode: Auto

Conference [1..1] IncomingMultisiteCall Mode

Select whether or not to allow incoming calls when already in a call/conference.

Requires user role: ADMIN

Value space: <Allow/Deny>

Allow: You will be notified when someone calls you while you are already in a call. You can accept the incoming call or not. The ongoing call may be put on hold while answering the incoming call; or you may merge the calls (requires MultiSite support).

Deny: An incoming call will be rejected if you are already in a call. You will not be notified about the incoming call. However, the call will appear as a missed call in the call history list.

Example:

Conference 1 IncomingMultisiteCall Mode: Allow

Page 73

Cisco TelePresence MX700 and MX800 Administrator Guide

Contents

Introduction

Web interface

System settings

Setting passwords

Appendices

System settings

FacilityService settings

FacilityService Service [1..5] Type

Up to five different facility services can be supported simultaneously. With this setting you can select what kind of services they are. A facility service is not available unless both the FacilityService Ser vice Name and the FacilityService Service Number settings are properly set. Only FacilityService Service 1 with Type Helpdesk is available on the Touch controller; the other options are available for system integrators using the API (Application Programming Interface) command set.

Requires user role: ADMIN

Value space: <Other/Concierge/Helpdesk/Emergency/Security/Catering/Transportation>

Other: Select this option for ser vices not covered by the other options. Concierge: Select this option for concierge services. Helpdesk: Select this option for helpdesk services. Emergency: Select this option for emergency services. Security: Select this option for security services. Catering: Select this option for catering services. Transportation: Select this option for transportation services.

Example:

FacilityService Service 1 Type: Helpdesk

FacilityService Service [1..5] Name

Enter the name of the facility service. Up to five different facility services are supported. A facility service is not available unless both the FacilityService Service Name and the FacilityService Ser vice Number settings are properly set. Only FacilityService Service 1 is available on the Touch controller, and the name will show on the facility service call button. The other services are available for system integrators using the API (Application Programming Interface) command set.

Requires user role: ADMIN

Value space: <S: 0, 255>

Format: String with a maximum of 255 characters.

Example:

FacilityService Service 1 Name: ""

FacilityService Service [1..5] Number

Enter the number (URI or phone number) of the facility service. Up to five different facility services are supported. A facility service is not available unless both the FacilityService Service Name and the FacilityService Service Number settings are properly set. Only FacilityService Service 1 is available on the Touch controller; the other options are available for system integrators using the API (Application Programming Interface) command set.

Requires user role: ADMIN

Value space: <S: 0, 255>

Format: String with a maximum of 255 characters.

Example:

FacilityService Service 1 Number: ""

FacilityService Service [1..5] CallType

Set the call type for each facility ser vice. Up to five different facility services are supported. A facility service is not available unless both the FacilityService Service Name and the FacilityService Ser vice Number settings are properly set. Only FacilityService Service 1 is available on the Touch controller; the other options are available for system integrators using the API (Application Programming Inter face) command set.

Requires user role: ADMIN

Value space: <Video/Audio>

Video: Select this option for video calls. Aud io: Select this option for audio calls.

Example:

FacilityService Service 1 CallType: Video

Page 74

Cisco TelePresence MX700 and MX800 Administrator Guide

Contents

Introduction

Web interface

System settings

Setting passwords

Appendices

System settings

GPIO settings

GPIO Pin [1..4] Mode

The four GPIO pins are configured individually. The state can be retrieved by "xStatus GPIO Pin [1..4] State". The default pin state is High (+12 V). When activated as output, they are set to 0 V. To activate them as input, they must be pulled down to 0 V.

Requires user role: ADMIN

Value space: <InputNoAction/OutputManualState/OutputInCall/OutputMicrophonesMuted/

OutputPresentationOn/OutputAllCallsEncrypted/OutputStandbyActive/InputMuteMicrophones>

InputNoAction: The pin state can be set, but no operation is performed. OutputManualState: The pin state can be set by "xCommand GPIO ManualState Set PinX:

<High/Low>" (to +12 V or 0 V, respectively).

OutputInCall: The pin is activated when in call, deactivated when not in call. OutputMicrophonesMuted: The pin is activated when microphones are muted, deactivated

when not muted. OutputPresentationOn: The pin is activated when presentation is active, deactivated when

presentation is not active. OutputAllCallsEncrypted: The pin is activated when all calls are encrypted, deactivated when

one or more calls are not encrypted. OutputStandbyActive: The pin is activated when the system is in standby mode, deactivated

when no longer in standby. InputMuteMicrophones: When the pin is activated (0 V), the microphones will be muted.

When deactivated (+ 12 V), the microphones are unmuted.

Example:

GPIO Pin 1 Mode: InputNoAction

Page 75

Cisco TelePresence MX700 and MX800 Administrator Guide

Contents

Introduction

Web interface

System settings

Setting passwords

Appendices

System settings

H323 settings

H323 NAT Mode

The firewall traversal technology creates a secure path through the firewall barrier, and enables proper exchange of audio/video data when connected to an external video conferencing system (when the IP traffic goes through a NAT router). NOTE: NAT does not work in conjunction with gatekeepers.

Requires user role: ADMIN

Value space: <Auto/Off/On>

Auto: The system will determine if the H323 NAT Address or the real IP address should be used in signaling. This makes it possible to place calls to endpoints on the LAN as well as endpoints on the WAN. If the H323 NAT Address is wrong or not set, the real IP address will be used.

Off: The system will signal the real IP address. On: The system will signal the configured H323 NAT Address instead of its real IP address

in Q.931 and H.245. The NAT Server Address will be shown in the startup-menu as: "My IP Address: 10.0.2.1". If the H323 NAT Address is wrong or not set, H.323 calls cannot be set up.

Example:

H323 NAT Mode: Off

H323 NAT Address

Enter the external/global IP address to the router with NAT support. Packets sent to the router will then be routed to the system. Note that NAT cannot be used when registered to a gatekeeper.

In the router, the following ports must be routed to the system's IP address: * Port 1720 * Port 5555-6555 * Port 2326-2487

Requires user role: ADMIN

Value space: <S: 0, 64>

Format: A valid IPv4 address or IPv6 address.

Example:

H323 NAT Address: ""

H323 Profile [1..1] Authentication Mode

Set the authenticatin mode for the H.323 profile.

Requires user role: ADMIN

Value space: <Off/On>

Off: If the H.323 Gatekeeper Authentication Mode is set to Off the system will not try to authenticate itself to a H.323 Gatekeeper, but will still try a normal registration.

On: If the H.323 Gatekeeper Authentication Mode is set to On and a H.323 Gatekeeper indicates that it requires authentication, the system will try to authenticate itself to the gatekeeper. Requires the Authentication LoginName and Authentication Password to be defined on both the codec and the Gatekeeper.

Example:

H323 Profile 1 Authentication Mode: Off

H323 Profile [1..1] Authentication LoginName

The system sends the Authentication Login Name and the Authentication Password to a H.323 Gatekeeper for authentication. The authentication is a one way authentication from the codec to the H.323 Gatekeeper, i.e. the system is authenticated to the gatekeeper. If the H.323 Gatekeeper indicates that no authentication is required, the system will still try to register. Requires the H.323 Gatekeeper Authentication Mode to be enabled.

Requires user role: ADMIN

Value space: <S: 0, 50>

Format: String with a maximum of 50 characters.

Example:

H323 Profile 1 Authentication LoginName: ""

Page 76

Cisco TelePresence MX700 and MX800 Administrator Guide

Contents

Introduction

Web interface

System settings

Setting passwords

Appendices

System settings

H323 Profile [1..1] Authentication Password

Requires user role: ADMIN

Value space: <S: 0, 50>

Format: String with a maximum of 50 characters.

Example:

H323 Profile 1 Authentication Password: ""

H323 Profile [1..1] CallSetup Mode

The H.323 Call Setup Mode defines whether to use a Gatekeeper or Direct calling when establishing H323 calls.

NOTE: Direct H.323 calls can be made even though the H.323 Call Setup Mode is set to Gatekeeper.

Requires user role: ADMIN

Value space: <Direct/Gatekeeper>

Direct: An IP address must be used when dialing in order to make the H323 call. Gatekeeper: The system will use a Gatekeeper to make a H.323 call. When selecting this

option the H323 Profile Gatekeeper Address and H323 Profile Gatekeeper Discovery settings must also be configured.

Example:

H323 Profile 1 CallSetup Mode: Gatekeeper

H323 Profile [1..1] Encryption MinKeySize

Define the minimum key size for the Diffie-Hellman key exchange method, which is used when establishing the Advanced Encryption Standard (AES) encryption key.

Requires user role: ADMIN

Value space: <1024bit/2048bit>

1024bi t: The minimum size is 1024 bit. 2048bit: The minimum size is 2048 bit.

Example:

H323 Profile 1 Encryption MinKeySize: 1024bit

H323 Profile [1..1] Gatekeeper Discovery

Determine how the system shall register to a H.323 Gatekeeper.

Requires user role: ADMIN

Value space: <Manual/Auto>

Manual: The system will use a specific Gatekeeper identified by the Gatekeeper's IP address. Auto: The system will automatically try to register to any available Gatekeeper. If a

Gatekeeper responds to the request sent from the codec within 30 seconds this specific Gatekeeper will be used. This requires that the Gatekeeper is in auto discovery mode as well. If no Gatekeeper responds, the system will not use a Gatekeeper for making H.323 calls and hence an IP address must be specified manually.

Example:

H323 Profile 1 Gatekeeper Discovery: Manual

H323 Profile [1..1] Gatekeeper Address

Enter the IP address of the Gatekeeper. Requires the H.323 Call Setup Mode to be set to Gatekeeper and the Gatekeeper Discovery to be set to Manual.

Requires user role: ADMIN

Value space: <S: 0, 255>

Format: A valid IPv4 address, IPv6 address or DNS name.

Example:

H323 Profile 1 Gatekeeper Address: "192.0.2.0"

H323 Profile [1..1] H323Alias E164

The H.323 Alias E.164 defines the address of the system, according to the numbering plan implemented in the H.323 Gatekeeper. The E.164 alias is equivalent to a telephone number, sometimes combined with access codes.

Requires user role: ADMIN

Value space: <S: 0, 30>

Format: Compact string with a maximum of 30 characters. Valid characters are 0-9, * and #.

Example:

H323 Profile 1 H323Alias E164: "90550092"

Page 77

Cisco TelePresence MX700 and MX800 Administrator Guide

Contents

Introduction

Web interface

System settings

Setting passwords

Appendices

System settings

H323 Profile [1..1] H323Alias ID

Lets you specify the H.323 Alias ID which is used to address the system on a H.323 Gatekeeper and will be displayed in the call lists. Example: "firstname.lastname@company.com", "My H.323 Alias ID"

Requires user role: ADMIN

Value space: <S: 0, 49>

Format: String with a maximum of 49 characters.

Example:

H323 Profile 1 H323Alias ID: "firstname.lastname@company.com"

H323 Profile [1..1] PortAllocation

The H.323 Port Allocation setting affects the H.245 port numbers used for H.323 call signalling.

Requires user role: ADMIN

Value space: <Dynamic/Static>

Dynamic: The system will allocate which ports to use when opening a TCP connection. The reason for doing this is to avoid using the same ports for subsequent calls, as some firewalls consider this as a sign of attack. When Dynamic is selected, the H.323 ports used are from 11000 to 20999. Once 20999 is reached they restart again at 11000. For RTP and RTCP media data, the system is using UDP ports in the range 2326 to 2487. Each media channel is using two adjacent ports, ie 2330 and 2331 for RTP and RTCP respectively. The ports are automatically selected by the system within the given range. Firewall administrators should not try to deduce which ports are used when, as the allocation schema within the mentioned range may change without any further notice.

Static: When set to Static the ports are given within a static predefined range [5555-6555].

Example:

H323 Profile 1 PortAllocation: Dynamic

Page 78

Cisco TelePresence MX700 and MX800 Administrator Guide

Contents

Introduction

Web interface

System settings

Setting passwords

Appendices

System settings

Logging settings

Logging Mode

Not applicable in this version.

Page 79

Cisco TelePresence MX700 and MX800 Administrator Guide

Contents

Introduction

Web interface

System settings

Setting passwords

Appendices

System settings

Network settings

Network [1..1] IPStack

Select if the system should use IPv4, IPv6, or dual IP stack, on the network interface. NOTE: After changing this setting you may have to wait up to 30 seconds before it takes effect.

Requires user role: ADMIN

Value space: <Dual/IPv4/IPv6>

Dual: When set to Dual, the network interface can operate on both IP versions at the same time, and can have both an IPv4 and an IPv6 address at the same time.

IPv4: When set to IPv4, the system will use IPv4 on the network interface. IPv6: When set to IPv6, the system will use IPv6 on the network interface.

Example:

Network 1 IPStack: Dual

Network [1..1] IPv4 Assignment

Define how the system will obtain its IPv4 address, subnet mask and gateway address. This setting only applies to systems on IPv4 networks.

Requires user role: ADMIN

Value space: <Static/DHCP>

Static: The addresses must be configured manually using the Network IPv4 Address, Network IPv4 Gateway and Network IPv4 SubnetMask settings (static addresses).

DHCP: The system addresses are automatically assigned by the DHCP server.

Example:

Network 1 IPv4 Assignment: DHCP

Network [1..1] IPv4 Address

Enter the static IPv4 network address for the system. This setting is only applicable when Network Assignment is set to Static.

Requires user role: ADMIN

Value space: <S: 0, 64>

Format: A valid IPv4 address.

Example:

Network 1 IPv4 Address: "192.0.2.2"

Network [1..1] IPv4 Gateway

Define the IPv4 network gateway. This setting is only applicable when the Network Assignment is set to Static.

Requires user role: ADMIN

Value space: <S: 0, 64>

Format: A valid IPv4 address.

Example:

Network 1 IPv4 Gateway: "192.0.2.1"

Network [1..1] IPv4 SubnetMask

Define the IPv4 network subnet mask. This setting is only applicable when the Network Assignment is set to Static.

Requires user role: ADMIN

Value space: <S: 0, 64>

Format: The valid IPv4 address format.

Example:

Network 1 IPv4 SubnetMask: "255.255.255.0"

Network [1..1] IPv6 Assignment

Define how the system will obtain its IPv6 address and the default gateway address. This setting only applies to systems on IPv6 networks.

Requires user role: ADMIN

Value space: <Static/DHCPv6/Autoconf>

Static: The codec and gateway IP addresses must be configured manually using the Network IPv6 Address and Network IPv6 Gateway settings. The options, for example NTP and DNS server addresses, must either be set manually or obtained from a DHCPv6 server. The Network IPv6 DHCPOptions setting determines which method to use.

DHCP v6: All IPv6 addresses, including options, will be obtained from a DHCPv6 server. See RFC 3315 for a detailed description. The Network IPv6 DHCPOptions setting will be ignored.

Autoconf: Enable IPv6 stateless autoconfiguration of the IPv6 network interface. See RFC 4862 for a detailed description. The options, for example NTP and DNS server addresses, must either be set manually or obtained from a DHCPv6 server. The Network IPv6 DHCPOptions setting determines which method to use.

Example:

Network 1 IPv6 Assignment: Autoconf

Page 80

Cisco TelePresence MX700 and MX800 Administrator Guide

Contents

Introduction

Web interface

System settings

Setting passwords

Appendices

System settings

Network [1..1] IPv6 Address

Enter the static IPv6 network address for the system. This setting is only applicable when the Network IPv6 Assignment is set to Static.

Requires user role: ADMIN

Value space: <S: 0, 64>

Format: A valid IPv6 address.

Example:

Network 1 IPv6 Address: "2001:0DB8:0000:0000:0000:0000:0000:0002"

Network [1..1] IPv6 Gateway

Define the IPv6 network gateway address. This setting is only applicable when the Network IPv6 Assignment is set to Static.

Requires user role: ADMIN

Value space: <S: 0, 64>

Format: A valid IPv6 address.

Example:

Network 1 IPv6 Gateway: "2001:0DB8:0000:0000:0000:0000:0000:0001"

Network [1..1] IPv6 DHCPOptions

Retrieve a set of DHCP options, for example NTP and DNS server addresses, from a DHCPv6 server.

Requires user role: ADMIN

Value space: <Off/On>

Off: Disable the retrieval of DHCP options from a DHCPv6 server. On: Enable the retrieval of a selected set of DHCP options from a DHCPv6 server.

Example:

Network 1 IPv6 DHCPOptions: On

Network [1..1] DHCP RequestTFTPServerAddress

This setting is used only for video systems that are registered to a Cisco Unified Communications Manager (CUCM).

The setting determines whether the endpoint should ask the DHCP server for DHCP option 150, so that it can discover the address of the TFTP server (provisioning server) automatically.

If this setting is Off or the DHCP server does not support option 150, the TFTP server address must be set manually using the Provisioning ExternalManager Address setting.

If the Network VLAN Voice Mode setting is Auto and the Cisco Discovery Protocol (CDP) assigns an ID to the voice VLAN, then a request for option 150 will always be sent. That is, the Network DHCP RequestTFTFSer verAddress setting will be ignored.

Requires user role: ADMIN

Value space: <Off/On>

Off: The video system will not send a request for DHCP option 150 and the address of the TFTP server must be set manually. See the note above for any exception to this rule.

On: The video system will send a request for option 150 to the DHCP server so that it can automatically discover the address of the TFTP server.

Example:

Network 1 DHCP RequestTFTPServerAddress: On

Network [1..1] DNS Domain Name

DNS Domain Name is the default domain name suffix which is added to unqualified names. Example: If the DNS Domain Name is "company.com" and the name to lookup is

"MyVideoSystem", this will result in the DNS lookup "MyVideoSystem.company.com".

Requires user role: ADMIN

Value space: <S: 0, 64>

Format: String with a maximum of 64 characters.

Example:

Network 1 DNS Domain Name: ""

Network [1..1] DNS Server [1..3] Address

Define the network addresses for DNS servers. Up to 3 addresses may be specified. If the network addresses are unknown, contact your administrator or Internet Service Provider.

Requires user role: ADMIN

Value space: <S: 0, 64>

Format: A valid IPv4 address or IPv6 address.

Example:

Network 1 DNS Server 1 Address: ""

Page 81

Cisco TelePresence MX700 and MX800 Administrator Guide

Contents

Introduction

Web interface

System settings

Setting passwords

Appendices

System settings

This setting will only take effect if Network QoS Mode is set to Diffserv. Define which priority Data packets should have in the IP network. The priority for the packets ranges from 0 to 63 - the higher the number, the higher the priority.

The recommended value for Data is 0, which means best effort. If in doubt, contact your network administrator.

The priority set here might be overridden when packets are leaving the network controlled by the local network administrator.

Requires user role: ADMIN

Value space: <0..63>

Range: Select a value between 0 to 63 - the higher the number, the higher the priority. The default value is 0 (best effort).

Example:

Network 1 QoS Diffserv Data: 0

Page 82

Cisco TelePresence MX700 and MX800 Administrator Guide

Contents

Introduction

Web interface

System settings

Setting passwords

Appendices

System settings

Network [1..1] QoS Diffserv Signalling

This setting will only take effect if Network QoS Mode is set to Diffserv. Define which priority Signalling packets that are deemed critical (time-sensitive) for the real-

time operation should have in the IP network. The priority for the packets ranges from 0 to 63 - the higher the number, the higher the priority.

The recommended class for Signalling is CS3, which equals the decimal value 24. If in doubt, contact your network administrator.

The priority set here might be overridden when packets are leaving the network controlled by the local network administrator.

Requires user role: ADMIN

Value space: <0..63>

Range: Select a value between 0 to 63 - the higher the number, the higher the priority. The default value is 0 (best effort).

Example:

Network 1 QoS Diffserv Signalling: 0

Network [1..1] QoS Diffserv ICMPv6

This setting will only take effect if Network QoS Mode is set to Diffserv. Define which priority ICMPv6 packets should have in the IP network. The priority for the packets ranges from 0 to 63 - the higher the number, the higher the priority.

The recommended value for ICMPv6 is 0, which means best effort. If in doubt, contact your network administrator.

The priority set here might be overridden when packets are leaving the network controlled by the local network administrator.

Requires user role: ADMIN

Value space: <0..63>

Range: Select a value between 0 to 63 - the higher the number, the higher the priority. The default value is 0 (best effort).

Example:

Network 1 QoS Diffserv ICMPv6: 0

Network [1..1] QoS Diffserv NTP

This setting will only take effect if Network QoS Mode is set to Diffserv. Define which priority NTP packets should have in the IP network. The priority for the packets ranges from 0 to 63 - the higher the number, the higher the priority.

The recommended value for NTP is 0, which means best effort. If in doubt, contact your network administrator.

The priority set here might be overridden when packets are leaving the network controlled by the local network administrator.

Requires user role: ADMIN

Value space: <0..63>

Range: Select a value between 0 to 63 - the higher the number, the higher the priority. The default value is 0 (best effort).

Example:

Network 1 QoS Diffserv NTP: 0

Network [1..1] IEEE8021X Mode

The system can be connected to an IEEE 802.1X LAN network, with a port-based network access control that is used to provide authenticated network access for Ethernet networks.

Requires user role: ADMIN

Value space: <Off/On>

Off: The 802.1X authentication is disabled (default). On: The 802.1X authentication is enabled.

Example:

Network 1 IEEE8021X Mode: Off

Page 83

Cisco TelePresence MX700 and MX800 Administrator Guide

Contents

Introduction

Web interface

System settings

Setting passwords

Appendices

System settings

Network [1..1] IEEE8021X TlsVerify

Verification of the server-side certificate of an IEEE802.1x connection against the certificates in the local CA-list when TLS is used. The CA-list must be uploaded to the video system. This can be done from the web interface.

This setting takes effect only when Network [1..1] IEEE8021X Eap Tls is enabled (On).

Requires user role: ADMIN

Value space: <Off/On>

Off: When set to Off, TLS connections are allowed without verifying the server-side X.509 certificate against the local CA-list. This should typically be selected if no CA-list has been uploaded to the codec.

On: When set to On, the server-side X.509 certificate will be validated against the local CAlist for all TLS connections. Only servers with a valid certificate will be allowed.

Example:

Network 1 IEEE8021X TlsVerify: Off

Network [1..1] IEEE8021X UseClientCertificate

Authentication using a private key/certificate pair during an IEEE802.1x connection. The authentication X.509 certificate must be uploaded to the video system. This can be done from the web interface.

Requires user role: ADMIN

Value space: <Off/On>

Off: When set to Off client-side authentication is not used (only server-side). On: When set to On the client (video system) will perform a mutual authentication TLS

handshake with the server.

Example:

Network 1 IEEE8021X UseClientCertificate: Off

Network [1..1] IEEE8021X Identity

The 802.1X Identity is the user name needed for 802.1X authentication.

Requires user role: ADMIN

Value space: <S: 0, 64>

Format: String with a maximum of 64 characters.

Example:

Network 1 IEEE8021X Identity: ""

Network [1..1] IEEE8021X Password

The 802.1X Password is the password needed for 802.1X authentication.

Requires user role: ADMIN

Value space: <S: 0, 32>

Format: String with a maximum of 32 characters.

Example:

Network 1 IEEE8021X Password: ""

Network [1..1] IEEE8021X AnonymousIdentity

The 802.1X Anonymous ID string is to be used as unencrypted identity with EAP (Extensible Authentication Protocol) types that support different tunneled identity, like EAP-PEAP and EAPTTLS. If set, the anonymous ID will be used for the initial (unencrypted) EAP Identity Request.

Requires user role: ADMIN

Value space: <S: 0, 64>

Format: String with a maximum of 64 characters.

Example:

Network 1 IEEE8021X AnonymousIdentity: ""

Network [1..1] IEEE8021X Eap Md5

Set the Md5 (Message-Digest Algorithm 5) mode. This is a Challenge Handshake Authentication Protocol that relies on a shared secret. Md5 is a Weak security.

Requires user role: ADMIN

Value space: <Off/On>

Off: The EAP-MD5 protocol is disabled. On: The EAP-MD5 protocol is enabled (default).

Example:

Network 1 IEEE8021X Eap Md5: On

Page 84

Cisco TelePresence MX700 and MX800 Administrator Guide

Contents

Set the network traffic control mode to decide how to control the video packets transmission speed.

Requires user role: ADMIN

Value space: <Off/On>

Off: Transmit video packets at link speed. On: Transmit video packets at maximum 20 Mbps. Can be used to smooth out bursts in the

outgoing network traffic.

Example:

Network 1 TrafficControl: On

Page 85

Cisco TelePresence MX700 and MX800 Administrator Guide

Contents

Introduction

Web interface

System settings

Setting passwords

Appendices

System settings

Network [1..1] RemoteAccess Allow

Filter IP addresses for access to ssh/telnet/HTTP/HTTPS.

Requires user role: ADMIN

Value space: <S: 0, 255>

Format: String with a maximum of 255 characters, comma separated IP addresses or IP range.

Example:

Net work 1 Re mo t eA c ce s s A llow: "19 2.168.1.231, 192.168.1.18 2"

Network [1..1] VLAN Voice Mode

Set the VLAN voice mode. The VLAN Voice Mode will be set to Auto automatically if you have Cisco UCM (Cisco Unified Communications Manager) as provisioning infrastructure.

Requires user role: ADMIN

Value space: <Auto/Manual/Off>

Auto: The Cisco Discovery Protocol (CDP), if available, assigns an id to the voice VLAN. If CDP is not available, VLAN is not enabled.

Manual: The VLAN ID is set manually using the Network VLAN Voice VlanId setting. If CDP is available, the manually set value will be overruled by the value assigned by CDP.

Off: VLAN is not enabled.

Example:

Network 1 VLAN Voice Mode: Auto

Network [1..1] VLAN Voice VlanId

Set the VLAN voice ID. This setting will only take effect if VLAN Voice Mode is set to Manual.

Requires user role: ADMIN

Value space: <1..409 4>

Range: Select a value from 1 to 4094.

Example:

Network 1 VLAN Voice VlanId: 1

Page 86

Cisco TelePresence MX700 and MX800 Administrator Guide

Contents

Introduction

Choose which information the user should see when logging on to the codec through Telnet/ SSH.

Requires user role: ADMIN

Value space: <Off/On>

Off: The welcome text is: Login successful On: The welcome text is: Welcome to <system name>; Software version; Software release

date; Login successful.

Example:

NetworkServices WelcomeText: On

NetworkServices XMLAPI Mode

Enable or disable the video system's XML API. For security reasons this may be disabled. Disabling the XML API will limit the remote manageability with for example TMS, which no longer will be able to connect to the video system.

Requires user role: ADMIN

Value space: <Off/On>

Off: The XML API is disabled. On: The XML API is enabled (default).

Example:

NetworkServices XMLAPI Mode: On

Page 87

Cisco TelePresence MX700 and MX800 Administrator Guide

Contents

Introduction

Web interface

System settings

Setting passwords

Appendices

System settings

Specify the URL of the OCSP responder (server) that will be used to check the certificate status.

Requires user role: ADMIN

Value space: <S: 0, 255>

Format: String with a maximum of 255 characters.

Example:

NetworkServices HTTPS OCSP URL: "http://ocspserver.company.com:81"

NetworkServices Medianet Metadata

Switch On or Off the capability to tag media flows with metadata related to the Cisco Medianet deployment.

Requires user role: ADMIN

Value space: <Off/On>

Off: Media flows will not be tagged with such metadata. On: Media flows will be tagged with such metadata.

Example:

NetworkServices Medianet Metadata: Off

Page 88

Cisco TelePresence MX700 and MX800 Administrator Guide

Contents

Introduction

Web interface

System settings

Setting passwords

Appendices

System settings

NetworkServices NTP Mode

The Network Time Protocol (NTP) is used to synchronize the time of the system to a reference time server. The time server will subsequently be queried every 24th hour for time updates. The time will be displayed on the top of the screen. The system will use the time to timestamp messages transmitted to Gatekeepers or Border Controllers requiring H.235 authentication. The system will use the time to timestamp messages transmitted to Gatekeepers or Border Controllers that requires H.235 authentication. It is also used for timestamping Placed Calls, Missed Calls and Received Calls.

Requires user role: ADMIN

Value space: <Auto/Off/Manual>

Auto: The system will use the NTP server, by which address is supplied from the DHCP server in the network. If no DHCP server is used, or the DHCP server does not provide the system with a NTP server address, the system will use the static defined NTP server address specified by the user.

Off: The system will not use an NTP server. Manual: The system will always use the static defined NTP server address specified by the

us e r.

Example:

NetworkServices NTP Mode: Auto

NetworkServices NTP Address

Enter the NTP Address to define the network time protocol server address. This address will be used if NTP Mode is set to Manual, or if set to Auto and no address is supplied by a DHCP server.

Requires user role: ADMIN

Value space: <S: 0, 64>

Format: A valid IPv4 address, IPv6 address or DNS name.

Example:

NetworkServices NTP Address: "0.tand berg.pool.ntp.org"

NetworkServices SNMP Mode

SNMP (Simple Network Management Protocol) is used in network management systems to monitor network-attached devices (routers, servers, switches, projectors, etc) for conditions that warrant administrative attention. SNMP exposes management data in the form of variables on the managed systems, which describe the system configuration. These variables can then be queried (set to ReadOnly) and sometimes set (set to ReadWrite) by managing applications.

Requires user role: ADMIN

Value space: <Off/ReadOnly/ReadWrite>

Off: Disable the SNMP network ser vice. ReadOnly: Enable the SNMP network service for queries only. ReadWrite: Enable the SNMP network service for both queries and commands.

Example:

NetworkServices SNMP Mode: ReadOnly

NetworkServices SNMP Host [1..3] Address

Enter the address of up to three SNMP Managers. The system's SNMP Agent (in the codec) responds to requests from SNMP Managers (a PC

program etc.), for example about system location and system contact. SNMP traps are not supported.

Requires user role: ADMIN

Value space: <S: 0, 64>

Format: A valid IPv4 address, IPv6 address or DNS name.

Example:

NetworkServices SNMP Host 1 Address: ""

NetworkServices SNMP CommunityName

Enter the name of the Network Services SNMP Community. SNMP Community names are used to authenticate SNMP requests. SNMP requests must have a password (case sensitive) in order to receive a response from the SNMP Agent in the codec. The default password is "public". If you have the Cisco TelePresence Management Suite (TMS) you must make sure the same SNMP Community is configured there too. NOTE: The SNMP Community password is case sensitive.

Requires user role: ADMIN

Value space: <S: 0, 50>

Format: String with a maximum of 50 characters.

Example:

NetworkServices SNMP CommunityName: "public"

Page 89

Cisco TelePresence MX700 and MX800 Administrator Guide

Contents

NetworkServices CTMS Encryption

This setting indicates whether or not the video system supports encryption when participating in a multiparty meeting controlled by a Cisco TelePresence Multipoint Switch (CTMS).

CTMS allows three security settings for meetings: non-secure (not encrypted), best effort (encrypted if all participants suppor t encryption, otherwise not encrypted) and secure (always encr ypted).

Requires user role: ADMIN

Value space: <Off/BestEffort>

Off: The video system does not allow encryption and therefore cannot participate in a secure CTMS meeting (encrypted). When participating in a best effort CTMS meeting, the meeting will be downgraded to non-secure (not encrypted).

BestEffort: The video system can negotiate encr yption parameters with CTMS and participate in a secure CTMS meeting (encrypted). Do not use this value if the CTMS version is older than 1.9.1.

Example:

NetworkServices CTMS Encryption: Off

Page 90

Cisco TelePresence MX700 and MX800 Administrator Guide

Contents

Introduction

Web interface

System settings

Setting passwords

Appendices

System settings

Peripherals settings

Peripherals Pairing CiscoTouchPanels RemotePairing

In order to use Cisco Touch 10 (touch panel) as user interface for the video system, Touch 10 must be either directly connected to the video system or paired to the video system via LAN. The latter is referred to as remote pairing.

Remote pairing is allowed by default; you must switch this setting Off if you want to prevent remote pairing.

Requires user role: ADMIN

Value space: <Off/On>

Off: Remote pairing of Touch 10 is not allowed. On: Remote pairing of Touch 10 is allowed.

Example:

Peripherals Profile TouchPanels

Set the number of touch panels that are expected to be connected to the video system. This information is used by the video system’s diagnostics service. If the number of connected touch panels does not match this setting, the diagnostics service will report it as an inconsistency. Note that only one Cisco Touch controller is supported in this version.

Requires user role: ADMIN

Value space: <N o t S e t / M i n i m u m1/0/1/2 /3/4/5 >

Example:

Peripherals Pairing CiscoTouchPanels RemotePairing: On

NotSet: No touch panel check is performed. Minimum1: At least one touch panel should be connected to the video system. 0-5: This number of Touch controllers should be connected to the video system.

Peripherals Profile TouchPanels: Minimum1

Page 91

Cisco TelePresence MX700 and MX800 Administrator Guide

Contents

Introduction

Web interface

System settings

Setting passwords

Appendices

System settings

Phonebook settings

Phonebook Server [1..1] ID

Enter a name for the external phone book.

Requires user role: ADMIN

Value space: <S: 0, 64>

Format: String with a maximum of 64 characters.

Example:

Phonebook Server [1..1] Type

Select the phonebook server type.

Requires user role: ADMIN

Value space: <VCS/TMS/Callway/CUCM>

Example:

Phonebook Server 1 ID: ""

VCS: Select VCS if the phonebook is located on the Cisco TelePresence Video Communication Server.

TMS: Select TMS if the phonebook is located on the Cisco TelePresence Management Suite server.

Callway: Select Callway if the phonebook is to be provided by the WebEx TelePresence subscription service (formerly called CallWay). Contact your WebEx TelePresence provider for more information.

CUCM: Select CUCM if the phonebook is located on the Cisco Unified Communications Manager.

Phonebook Server 1 Type: TMS

Phonebook Server [1..1] URL

Enter the address (URL) to the external phone book server.

Requires user role: ADMIN

Value space: <S: 0, 255>

Format: String with a maximum of 255 characters.

Example:

Phonebook Server 1 URL: "http://tms.company.com/tms/public/external/

phonebook/phonebookservice.asmx"

Page 92

Cisco TelePresence MX700 and MX800 Administrator Guide

Contents

Introduction

Web interface

System settings

Setting passwords

Appendices

System settings

Provisioning settings

Provisioning Connectivity

This setting controls how the device discovers whether it should request an internal or external configuration from the provisioning server.

Requires user role: ADMIN

Value space: <Internal/External/Auto>

Internal: Request internal configuration. External: Request external configuration. Auto: Automatically discover using NAPTR queries whether internal or external configurations

should be requested. If the NAPTR responses have the "e" flag, external configurations will be requested. Otherwise internal configurations will be requested.

Example:

Provisioning Connectivity: Auto

Provisioning Mode

It is possible to configure a video system using a provisioning system (external manager). This allows video conferencing network administrators to manage many video systems simultaneously. With this setting you choose which type of provisioning system to use. Provisioning can also be switched off. Contact your provisioning system provider/representative for more information.

Requires user role: ADMIN

Value space: <Off/TMS/VCS/CallWay/CUCM/Auto/Edge>

Off: The video system will not be configured by a provisioning system. Auto: The provisioning server will automatically be selected by the video system. TMS: The video system will be configured using TMS (Cisco TelePresence Management

System). VCS: The video system will be configured using VCS (Cisco TelePresence Video

Communication Server). Callway: The video system will be configured using the WebEx TelePresence subscription

service (formerly named Callway). CUCM: The video system will be configured using CUCM (Cisco Unified Communications

Manager). Edge: The system will connect to CUCM via the Collaboration Edge infrastructure.

Example:

Provisioning Mode: Auto

Provisioning LoginName

This is the user name part of the credentials used to authenticate the video system with the provisioning server. This setting must be used when required by the provisioning server. If Provisioning Mode is Callway (WebEx TelePresence), enter the video number.

Requires user role: ADMIN

Value space: <S: 0, 80>

Format: String with a maximum of 80 characters.

Example:

Provisioning LoginName: ""

Provisioning Password

This is the password part of the credentials used to authenticate the video system with the provisioning server. This setting must be used when required by the provisioning server. If Provisioning Mode is Callway (WebEx TelePresence), enter the activation code.

Requires user role: ADMIN

Value space: <S: 0, 64>

Format: String with a maximum of 64 characters.

Example:

Provisioning Password: ""

Provisioning HttpMethod

Select the HTTP method to be used for the provisioning.

Requires user role: ADMIN

Value space: <G E T/ P O ST>

GE T: Select GET when the provisioning server supports GET. PO S T: Select POST when the provisioning server supports POST.

Example:

Provisioning HttpMethod: POST

Page 93

Cisco TelePresence MX700 and MX800 Administrator Guide

Contents

Introduction

Web interface

System settings

Setting passwords

Appendices

System settings

Provisioning ExternalManager Address

Enter the IP Address or DNS name of the external manager / provisioning system. If an External Manager Address (and Path) is configured, the system will send a message to this

address when star ting up. When receiving this message the external manager / provisioning system can return configurations/commands to the unit as a result.

When using CUCM or TMS provisioning, the DHCP server can be set up to provide the external manager address automatically (DHCP Option 242 for TMS, and DHCP Option 150 for CUCM). An address set in the Provisioning ExternalManager Address setting will override the address provided by DHCP.

Requires user role: ADMIN

Value space: <S: 0, 64>

Format: A valid IPv4 address, IPv6 address or DNS name.

Example:

Provisioning ExternalManager Address: ""

Provisioning ExternalManager AlternateAddress

Only applicable when the endpoint is provisioned by Cisco Unified Communication Manager (CUCM) and an alternate CUCM is available for redundancy. Enter the address of the alternate CUCM. If the main CUCM is not available, the endpoint will be provisioned by the alternate CUCM. When the main CUCM is available again, the endpoint will be provisioned by this CUCM.

Requires user role: ADMIN

Value space: <S: 0, 64>

Format: A valid IPv4 address, IPv6 address or DNS name.

Example:

Provisioning ExternalManager AlternateAddress: ""

Provisioning ExternalManager Path

Set the Path to the external manager / provisioning system. This setting is required when several management services reside on the same server, i.e. share the same External Manager address.

Requires user role: ADMIN

Value space: <S: 0, 255>

Format: String with a maximum of 255 characters.

Example:

Provisioning ExternalManager Path: "tms/public/external/management/

SystemManagementService.asmx"

Provisioning ExternalManager Domain

Enter the SIP domain for the VCS provisioning server.

Requires user role: ADMIN

Value space: <S: 0, 64>

Format: String with a maximum of 64 characters.

Example:

Provisioning ExternalManager Domain: "any.domain.com"

Provisioning ExternalManager Protocol

Determine whether to use secure management or not.

Requires user role: ADMIN

Value space: <HTTP/HTTPS>

HTTP: Set to HTTP to disable secure management. Requires HTTP to be enabled in the NetworkServices HTTP Mode setting.

HTTPS: Set to HTTPS to enable secure management. Requires HTTPS to be enabled in the NetworkServices HTTPS Mode setting.

Example:

Provisioning ExternalManager Protocol: HTTP

Page 94

Cisco TelePresence MX700 and MX800 Administrator Guide

Contents

Introduction

Web interface

System settings

Setting passwords

Appendices

System settings

RTP settings

RTP Ports Range Start

Specify the first port in the range of RTP ports. Also see the H323 Profile [1..1] PortAllocation setting.

NOTE: Restar t the system for any change to this setting to take effect.

Requires user role: ADMIN

Value space: <1024..65438>

Range: Select a value from 1024 to 65438.

Example:

RTP Ports Range Stop

Specify the last RTP port in the range. Also see the H323 Profile [1..1] PortAllocation setting. NOTE: Restar t the system for any change to this setting to take effect.

Requires user role: ADMIN

Value space: <1120..65535>

Example:

RTP Ports Range Start: 2326

Range: Select a value from 1120 to 65535.

RTP Ports Range Stop: 2486

Page 95

Cisco TelePresence MX700 and MX800 Administrator Guide

Contents

Introduction

Web interface

System settings

Setting passwords

Appendices

System settings

Security settings

Security Audit Logging Mode

Determine where to record or transmit the audit logs. The audit logs are sent to a syslog server. When using the External/ExternalSecure modes and setting the port assignment to manual in

the Security Audit Server PortAssignment setting, you must also enter the address and port number for the audit server in the Security Audit Server Address and Security Audit Server Port settings.

Requires user role: AUDIT

Value space: <Off/Internal/External/ExternalSecure>

Off: No audit logging is performed. Internal: The system records the audit logs to internal logs, and rotates logs when they are

full. External: The system sends the audit logs to an external syslog server. The syslog server

must support UDP. ExternalSecure: The system sends encrypted audit logs to an external syslog server that is

verified by a certificate in the Audit CA list. The Audit CA list file must be uploaded to the codec using the web interface. The common_name parameter of a certificate in the CA list must match the IP address of the syslog server, and the secure TCP server must be set up to listen for secure (TLS) TCP Syslog messages.

Example:

Security Audit Logging Mode: Off

Security Audit OnError Action

Determine what happens when the connection to the syslog server is lost. This setting is only relevant when Security Audit Logging Mode is set to ExternalSecure.

Requires user role: AUDIT

Value space: <Halt/Ignore>

Halt: If a halt condition is detected the system codec is rebooted and only the auditor is allowed to operate the unit until the halt condition has passed. When the halt condition has passed the audit logs are re-spooled to the syslog server. Halt conditions are: A network breach (no physical link), no syslog server running (or incorrect address or port to the syslog server), TLS authentication failed (if in use), local backup (re-spooling) log full.

Ignore: The system will continue its normal operation, and rotate internal logs when full. When the connection is restored it will again send its audit logs to the syslog server.

Example:

Security Audit OnError Action: Ignore

Security Audit Server Address

The audit logs are sent to a syslog server. Enter the IP address of the syslog server. Only valid IPv4 or IPv6 address formats are accepted. Host names are not supported. This setting is only relevant when Security Audit Logging Mode is set to External or ExternalSecure.

Requires user role: AUDIT

Value space: <S: 0, 64>

Format: A valid IPv4 address or IPv6 address

Example:

Security Audit Server Address: ""

Security Audit Server Port

The audit logs are sent to a syslog server. Enter the port of the syslog server that the system shall send its audit logs to. This setting is only relevant when Security Audit PortAssignment is set to Manual.

Requires user role: AUDIT

Value space: <0..65535>

Range: Select a value from 0 to 65535.

Example:

Security Audit Server Port: 514

Security Audit Server PortAssignment

The audit logs are sent to a syslog server. You can define how the port number of the external syslog server will be assigned. This setting is only relevant when Security Audit Logging Mode is set to External or ExternalSecure. To see which port number is used you can check the Security Audit Server Port status. Navigate to Configuration > System status on the web interface or; if on a command line interface, run the command xStatus Security Audit Server Port.

Requires user role: AUDIT

Value space: <Auto/Manual>

Auto: Will use UDP port number 514 when the Security Audit Logging Mode is set to External. Will use TCP port number 6514 when the Security Audit Logging Mode is set to ExternalSecure.

Manual: Will use the por t value defined in the Security Audit Server Port setting.

Example:

Security Audit Server PortAssignment: Auto

Page 96

Cisco TelePresence MX700 and MX800 Administrator Guide

Contents

Introduction

Web interface

System settings

Setting passwords

Appendices

System settings

Security Session ShowLastLogon

When logging in to the system using SSH or Telnet you will see the UserId, time and date of the last session that did a successful login.

Requires user role: ADMIN

Value space: <Off/On>

On: Show information about the last session. Off: Do not show information about the last session.

Example:

Security Session ShowLastLogon: Off

Security Session InactivityTimeout

Determine how long the system will accept inactivity from the user before he is automatically logged out.

Requires user role: ADMIN

Value space: <0..10000>

Range: Select a value between 1 and 10000 seconds; or select 0 when inactivity should not enforce automatic logout.

Example:

Security Session InactivityTimeout: 0

Page 97

Cisco TelePresence MX700 and MX800 Administrator Guide

Contents

Introduction

Web interface

System settings

Setting passwords

Appendices

System settings

SerialPort settings

SerialPort Mode

Enable/disable the serial port (COM port).

Requires user role: ADMIN

Value space: <Off/On>

Off: Disable the serial port. On: Enable the serial port.

Example:

SerialPort BaudRate

Specify the baud rate (data transmission rate, bits per second) for the serial port. The default value is 115200.

Other connection parameters for the serial por t are: Data bits: 8; Parity: None; Stop bits: 1; Flow control: None.

Requires user role: ADMIN

Value space: <9600/19200/38400/57600/115200>

Example:

SerialPort Mode: On

Range: Select a baud rate from the baud rates listed (bps).

SerialPort BaudRate: 115200

SerialPort LoginRequired

Determine if login shall be required when connecting to the serial port.

Requires user role: ADMIN

Value space: <Off/On>

Off: The user can access the codec via the serial port without any login. On: Login is required when connecting to the codec via the serial port.

Example:

SerialPort LoginRequired: On

Page 98

Cisco TelePresence MX700 and MX800 Administrator Guide

Contents

Introduction

Web interface

System settings

Setting passwords

Appendices

System settings

SIP settings

SIP ANAT

ANAT (Alternative Network Address Types) enables media negotiation for multiple addresses and address types, as specified in RFC 4091.

Requires user role: ADMIN

Not applicable in this version.

SIP OCSP DefaultResponder

Not applicable in this version.

Page 99

Cisco TelePresence MX700 and MX800 Administrator Guide

Contents

Introduction

Web interface

System settings

Setting passwords

Appendices

System settings

SIP Profile [1..1] Ice Mode

ICE (Interactive Connectivity Establishment, RFC 5245) is a NAT traversal solution that the endpoints can use to discover the optimized media path. Thus the shortest route for audio and video is always secured between the endpoints. NOTE: ICE is not supported when registered to CUCM (Cisco Unified Communication Manager).

Requires user role: ADMIN

Value space: <Auto/Off/On>

Auto: When set to Auto, ICE will be enabled if a turn server is provided, otherwise ICE will be disabled.

Off: Set to Off to disable ICE. On: Set to On to enable ICE.

Example:

SIP Profile 1 Ice Mode: Auto

SIP Profile [1..1] Ice DefaultCandidate

This is the default IP address that the endpoint will receive media on until ICE has reached a conclusion about which media route to use (up to the first 5 seconds of a call.

Requires user role: ADMIN

Value space: <Host/Rflx/Relay>

Host: The endpoint will receive media on its own IP address. Rflx: The endpoint will receive media on its public IP address as seen by the TURN server. Relay: The endpoint will receive media on the IP address and port allocated on the TURN

server, and is used as a fallback until ICE has concluded.

Example:

SIP Profile 1 Ice DefaultCandidate: Host

SIP Profile [1..1] Turn BandwidthProbe

Not applicable in this version.

SIP Profile [1..1] Turn DropRflx

DropRflx will make the endpoint force media through the Turn relay, unless the remote endpoint is on the same network.

Requires user role: ADMIN

Value space: <Off/On>

Off: Disable DropRflx. On: The system will force media through the Turn relay when the remote endpoint is on

another network.

Example:

SIP Profile Turn DropRflx: Off

SIP Profile [1..1] Turn Server

This is the address of the TURN (Traversal Using Relay NAT) server that the endpoints will use. It is used as a media relay fallback and it is also used to discover the endpoint’s own public IP address.

Requires user role: ADMIN

Value space: <S: 0, 255>

Format: The preferred format is DNS SRV record (e.g. _turn._udp.<domain>), or it can be a valid IPv4 or IPv6 address.

Example:

SIP Profile 1 Turn Server: " _ turn. _ udp.example.com"

SIP Profile [1..1] Turn DiscoverMode

Set the discover mode to enable/disable the application to search for available Turn servers in DNS. Before making calls, the system will test if port allocation is possible.

Requires user role: ADMIN

Value space: <Off/On>

Off: Set to Off to disable discovery mode. On: When set to On, the system will search for available Turn servers in DNS, and before

making calls the system will test if port allocation is possible.

Example:

SIP Profile Turn DiscoverMode: On

SIP Profile [1..1] Turn UserName

The user name needed for accessing the TURN server.

Requires user role: ADMIN

Value space: <S: 0, 128>

Format: String with a maximum of 128 characters.

Example:

SIP Profile 1 Turn UserName: ""

Page 100

Cisco TelePresence MX700 and MX800 Administrator Guide

Contents

Select the transport protocol to be used over the LAN.

Requires user role: ADMIN

Value space: <TCP/UD P/Tls/Auto>

TCP: The system will always use TCP as the default transport method. UDP: The system will always use UDP as the default transport method. Tls: The system will always use TLS as the default transport method. For TLS connections

a SIP CA-list can be uploaded to the video system. If no such CA-list is available on the system then anonymous Diffie Hellman will be used.

Auto: The system will try to connect using transport protocols in the following order: TLS, TC P, U D P.

Example:

SIP Profile 1 DefaultTransport: Auto

SIP Profile [1..1] TlsVerify

For TLS connections a SIP CA-list can be uploaded to the video system. This can be done from the web interface.

Requires user role: ADMIN

Value space: <Off/On>

Off: Set to Off to allow TLS connections without verifying them. The TLS connections are allowed to be set up without verifying the x.509 certificate received from the server against the local CA-list. This should typically be selected if no SIP CA-list has been uploaded.

On: Set to On to verify TLS connections. Only TLS connections to servers, whose x.509 certificate is validated against the CA-list, will be allowed.

Example:

SIP Profile 1 TlsVerify: Off

100