Cisco DPC3829, DPC3829M User Manual
OL-30545-01
Cisco Model DPC3829 and
DPC3829M DO CSI S 3.0 8x4
Wireless Residential Gateway
User Guide
Please R ead
Important
Please read this entire guide. If this guide provides installation or operation
instructions, give particular attention to all safety statements included in this guide.
Notices
T rademark Acknowledgm ents
Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its
affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this
URL: www.cisco.com/go/trademarks. DOCSIS is a registered trademark of Cable
Television Laboratories, Inc., and PacketCable is a trademark of Cable Television
Laboratories, Inc. The Wi-Fi Protected Setup mark is a mark of the Wi-Fi Alliance.
Wi-Fi Protected Setup is a trademark of the Wi-Fi Alliance.
Other third party trademarks mentioned are the property of their respective owners.
The use of the word partner does not imply a partnership relationship between
Cisco and any other company. (1110R)
Publication Disclaimer
Cisco Systems, Inc. assumes no responsibility for errors or omissions that may
app ea r in this publication. We reserve the right to change this publication at any
time without notice. This document is not to be const rued as conferring by
implication, estoppel, or otherwise any license or right under any copyright or
pat ent , whether or not the use of any information in this document employs an
invention claimed in any existing or later issued patent.
Disclaimer
The maximum performance for wireless is derived from IEEE Standard 802.11
specifications. Actual performance can vary, including lower wireless network
ca pacity, data t hroughput rate, range and coverage. Performance depends on ma ny
factors, conditions and variables, including distance from the access point, volume of
network traffic, building materials and construction, operating system used, mix of
wireless products used, interference and other adverse conditions.
Software and Firmware Use
The software described in this document is protected by copyright law and
furnished to you under a licens e agreement. You may only use or copy this softwa re
in accordance with the terms of your license agreement.
The firmware in this equipment is protected by copyright law. You may only use the
firmware in the equipment in which it is provided. Any reproduction or distribution
of this firmware, or any portion of it, without our express written consent is
prohibited.
Copyright
© 2013 Cisco Systems, Inc. All rights reserved. Printed in the United States of
America.
Information in this publication is subject to cha nge without notice. No part of this
publication may be reproduced or transmitted in any form, by photocopy,
microfilm, xerography, or any other means, or incorporated into any information
retrieval system, electronic or mechanical, for any purpose, without the express
permission of Cisco Systems, Inc.
OL-30545-01 iii
Contents
IMPORTANT SAFETY INSTRUCTIONS vii
United States FCC Com pl iance xi
Chap ter 1 Introducing the DOCSIS Wireless Residential Gat ew ay 1
Introduction ......................................................................................................................... 2
What's In th e Carto n? .......................................................................................................... 3
Front Panel Description ...................................................................................................... 4
Back Panel Desc ription ....................................................................................................... 6
Chapter 2 Installing the DOCSIS Wireless Residential Gateway 9
Installation P reparations ................................................................................................... 10
Install the Wir el ess Res idential Gateway ........................................................................ 15
Cha pt er 3 Oper ati o n of F ront Pan el Indicators 17
Initial Power Up, Calibration, and Registration (AC Power Appli ed).......................... 18
Normal Op era tio ns (AC Pow er Applied) ....................................................................... 20
Special Co nditio ns ............................................................................................................. 21
Chapter 4 Tr oub leshoo tin g th e DOCS IS Wire les s R esid en t ial
Gateway 23
Fre que nt ly Ask ed Questions ............................................................................................ 24
Common Troubleshooting Issues .................................................................................... 29
Tips for Improv ed Performa nce ....................................................................................... 30
Chapter 5 Customer Infor mation 31
Index 33
Notice to Installer s
The servicing instructions in this notice are for use by qualified service personnel only. To r ed uce the
ri sk of electric shock, do not perform any servicing other than tha t contained in the operating
instructions, unless you are qualified to do so.
Notice à l’atten t ion des installateurs d e réseaux câblés
Les instructions relatives aux interventi ons d’entreti en, fournies dans l a présente notice, s’ adressent
exclusivement au personnel technique quali fi é. Pour réduir e les risques de chocs électr iques, n’effectuer
aucune interventi on autr e que celles d écri tes dans le mod e d 'emploi et les instructions relatives au
foncti onnement, à moins que vous ne soyez quali fi é pour ce fai re.
Mitteilung für CA TV -Techniker
Die in dieser Mitteilung aufgeführten Wartungsanweisungen sind ausschließlich für qualifiziertes
Fachper sonal bestimmt. Um d ie Gefahr eines el ektrischen Schlags z u r eduzier en, sollten Si e keine
Wartungsarbeiten durchführen, die nicht ausdr ückl ich in d er B edienungsanl eitung aufgeführt sind,
außer Sie sind zur Durchführung solcher Arbeiten qualifiziert.
Aviso a los instaladores de sistem as CATV
Las instr ucciones d e repara ción contenida s en el presente aviso s on pa ra uso exclusivo por par te d e
pers ona l de ma nteni miento cua lificado. Con el fin de red uci r el r iesgo de d esca rga el éctrica, no reali ce
ninguna otra operación de reparación distinta a la s conteni das en la s instrucciones de funcionamiento, a
menos que posea la cualificación necesaria para hacerlo.
20080814_Installer820_Intl
IMPORTANT SAFETY INSTRUCTIONS
OL-30545-01 vii
IMPORTANT SAFETY INSTRUCTIONS
1)
Read these ins tr uctions.
4)
Follow all instructions.
5)
Do not use this apparatus near water.
l near any heat sources such as radiators, heat registers, stoves, or other
10)
Protect the power cord from being walked on or pinched particularly at plugs,
12)
Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer,
apparatus has been exposed to rain or moisture, does not operate normally, or has
WARNING: A void e lectric shock a nd fire hazard! If this pr oduct connects to coa x ial
2) Keep these i nstructi ons.
3) Heed all warnings.
6) Clean only with dr y cloth.
7) Do not block a ny ventilation openings. Install in a ccorda nce with the ma nufacturer's
instructions.
8) Do not insta l
apparatus (including amplifiers) that produce heat.
9) Do not d efeat the safety pur pose of the pol ariz ed or ground ing-type plug. A
polarized plug has two blades with one wider than the other . A ground ing-type
plug has two blades and a third grounding prong. The wide blade or the third
prong are provided for your safety. If the provided plug does not fit into your
outl et, consult an electrician for repla cement of the obsolete outlet.
convenience recepta cl es, and the point w her e they exi t from the a pparatus.
11) Only use a ttachments/a ccessories specified by the ma nufa cturer .
or sold with the apparatus. When a cart is used, use caution when moving the
cart/apparatus combination to avoid injury from tip-over.
13) Unplug this apparatus during lightning storms or when unused for long periods of
time.
14) Refer a ll servicing to qual ified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as a power-suppl y cord or plug is
damaged, liquid has been spilled or objects have fal len into the appar a tus, the
been d ropped.
P ower Source W arni ng
A label on this product indicates the correct power source for this product. Operate this product only
from a n electri ca l outl et w i th the vol tage and frequency i ndicated on the product l abel. If you are
uncertain of the type of power supply to your home or business, consult your service provider or your
local power company.
The AC inlet on the unit must remain accessible and operable at all times.
Ground the Product
cable wiring, be sure the cable system is grounded (earthed). Grounding p rovides
some protection against voltage surge s and b uilt-up static charges.
IMPORTANT SAFETY INSTRUCTIONS
viii OL-30545-01
WARNING: Avoid e lec tr i c shoc k and fir e haz a r d! Do not overload AC p ower/ma ins,
outlets, extension cords, or integral convenience receptacles. For products that require
P rotect the P roduct from Lightni ng
In add ition to di sconnecti ng the AC power from the wa ll outlet, di sconnect the signal inputs.
Verify th e Power Source from the On/Off Power Light
When the on/off power light is not illumina ted , the a ppar atus may still be connected to the power
source. The li ght may go out when the a pparatus is turned off, r ega r dles s of w hether i t i s still plugged
into an AC power source.
Eliminate AC Power/Mains Overloads
battery power or other power sources to operate them, refer to the operating
instr uctions f or those p roducts.
Provide V entilation and Select a Location
Remove all packaging material before applying power to the product.
Do not place this apparatus on a bed, sofa, rug, or similar surface.
Do not place this apparatus on an unstable surface.
Do not insta ll this a ppar atus in an enclosure, such as a bookcase or r ack, unless the installation
provi d es proper ventilation.
Do not place entertainment devices (such as VCRs or DVDs), lamps, books, vases with liquids, or
other objects on top of this product.
Do not block ventilation openings.
Opera ting E nvi ronm ent
This product is designed for operation indoors with a temperature range from 32° to 104° F (0° to 40°C).
Each product should have adequate spacing on all sides so that the cooling air vents on the chassis are
not blocked.
IMPORTANT SAFETY INSTRUCTIONS
OL-30545-01 ix
P rotect from E xpos ure to Moisture and Fore ign O bject s
WARNI NG: Avoid electr ic shock and fire hazard! Do not expose this product to
WARNING: Avoid ele ctr ic shock a nd f ire ha z a r d! Unp lug this p r oduct before cleaning.
Do not use a liquid cleaner or an aerosol cleaner. Do not use a magnetic/static cleaning
WARNING: A void e lectric shock a nd fire hazard! Neve r p ush ob jects through the
WARNING: Avoid e lec tr i c shoc k! Do not open the cover of this p r oduct. Op e ning or
dripping or splashing liq uids, rain, or moisture. Objects filled with liquids, such as
vases, should not be placed on this apparatus.
device (dust re mover ) to clea n this product.
op e nings in this product. For eign obje cts can cause electrical shor ts that can re sult in
electric shock or fire.
Service Warnin gs
removing the cover may e xp ose you to dangerous voltage s. If you open the cover, your
warranty will be void. This product contains no user-serviceable parts.
Check Product Safety
Upon completion of any service or r epair s to this product, the ser vi ce technician must perfor m safety
checks to determine that this product is in proper operating condition.
P rotect the P roduct W hen Movi ng It
Alwa ys d isconnect the power source w hen moving the appara tus or connecti ng or disconnecting
cabl es.
United Sta te s FCC Complianc e
OL-30545-01 xi
United S tates FCC Compliance
This device has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against such interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy. If not installed and used in accordance with the
instructions, it may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by
turning the equipment OFF and ON, the user is encouraged to try to correct the interference
by one or more of the followin g measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the service provider or an experienced radio/television technician for help.
Any chang es or modifications not e xpre ssly approved by Cisco Systems, Inc. , could void the
user's authority to operate the equipment.
The information shown in the FCC Declaration of Conformity paragraph below is a
requirement of the FCC and is intended to supply you with information regarding the FCC
approval of this device. The phone numbers listed are for FCC-related questions only and not
intended for questions regarding the connection or operation for this device. Please contact your
service provider for any questions you may have regarding the operation or installation of this device.
De cla ration of Conform it y
This device complies with Part 15 of FCC
Rules. Operation is subject to the following
two condition s: 1) the dev ice may not cause
harmful interference, and 2) the device must
accept any interference received, including
interference that may cause undesired
operation.
DOCSIS Wireless Residential Gateway
Model(s): DPC3829 DPC3829M
Manufactured by:
Cisco Systems, Inc.
5030 Sugarloaf Parkway
Lawrenceville, Georgia 30044 USA
Canada EMI R egulation
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la class B est conforme à la norme NMB-003 du Canada.
United Sta te s FCC Complianc e
x ii OL-30545-01
RF Exposure Statements
Note: 7KLVGHYLFHDQGLWVDQWHQQDVVPXVWQRWEHFRORFDWHGRURSHUDWLQJLQFRQMXQFWLRQZLWKDQ\RWKHU
DQWHQQDRUWUDQVPLWWHUH[FHSWLQDFFRUGDQFHZLWK)&&PXOWLWUDQVPLWWHUSURGXFWSURFHGXUHVThis
equipment shouldbe installed and operated with a minimumdistance of 7.9 inches (20 cm)
between the radiator and your body. For products available in the USA/Canada market, only
channels 1-11 can be operated.The selection of other channels is not possible.
US
This system has been evaluated for RF exposure for humans in reference to ANSI C 95.1
(American National Standards Institute) limits. The evaluation was based in accordance with
FCC OET Bulletin 65C rev 01.01 in compliance with Part 2.1091 and Part 15.27. The minimum
separation distance from the antenna to general bystander is 7.9 inches (20 cm) to maintain
compliance.
Canada
This system has been evaluated for RF exposure for humans in reference to Canada Health
Code 6 (2009) limits. The evaluation was based on evaluation per RSS-102 Rev 4. The
minimum separation distance from the antenna to general bystander is 7.9 inches (20 cm) to
maintain compliance.
20100527 FCC DSL_Domest ic
United States FCC Compliance
OL-30545-01 xiii
National Restrictions
This product is for in door use only .
USA/Canada
This system has been evaluated for RS-210. When operating this system, adhere to the
following requirements:
When operating in the band 5150-5250 MHz, the device is only for indoor use to reduce
the potential for harmful interference to co-channel mobile satellite systems.
The maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470-
5725 MHz shall comply with the EIRP limit.
The maximum antenna gain permitted for devices in the band 5725-5825 MHz shall
comply with the EIRP limits specified for point-to-point and non point-to-point
operation as appropriate.
Users should also be advised that high-power radars are allocated as primary users (i.e.
priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and that these radars
could cause interference and/or damage to LE-LAN devices.
Operation in the 5600- 5650 MHz band in the US is not permitted at this time to avoid
interference with Terminal Doppler Weather Radar systems operated by the FAA. This
requirement is applicable to systems installed indoors or outdoors. Note: Industry
Canada also restricts operation of this band per RSS-210. Systems being installed
outdoors are subject to the following restrictions:
a Systems must be professionally installed by trained qualified engineer or technicians.
b Systems must be installed per the recommended guidelines in the installation guide
for the outdoor systems.
c The use of non-approved Cisco antennas or unauthorized modifications could affe ct
the operation of the system and result in interference to the TDWR and as such the
operator could be held liable for such interference.
United Sta te s FCC Complianc e
x iv OL-30545-01
Ce système a été évalué pour les normes radioélectriques RS-210. Lorsque vous exploitez ce
système, respectez les exigences listées ci-dessous.
Quand l'appareil est exploité dans la bande 5150-5250 MHz, il peut uniquement être
utilisé à l'intérieur pour réduire le risque de brouillage préjudiciable qui pourrait affecter
les systèmes satellites portables sur la même voie.
Le gain d'antenne maximal permis dans le cas des appareils utilisant les bandes 5250-
5350 MHz et 5470-5725 MHz doit être conforme à la limite PIRE (EIRP).
Le gain d'antenne maximal permis dans le cas des appareils utilisant la bande 5725-5825
MHz doit être conforme aux limites PIRE (EIRP) précisées pour les activités point à point
et non point à point, le cas échéant.
Les utilisateurs doivent aussi savoir que les radars haute puissance sont les utilisateurs
principaux (c.-à-d. les utilisateurs prioritaires) des bandes 5250-5350 MHz et 5650-5850
MHz et que ces appareils sont susceptibles de causer des parasites ou des dommages aux
dispositifs LE-LAN.
Le fonctionnement en 5600 - bande 5650 MHz aux Etats-Unis n'est pas autorisée à ce
moment pour éviter les interférences avec Doppler systèmes radar météorologiques
terminal exploité par la FAA. Cette exigence est applicable aux systèmes à l'intérieur ou à
l'extérieur installés. Note: Industrie Canada procède également à l'exploitation de cette
bande par RSS-210. Systèmes étant installés à l'extérieur sont soumis aux restrictions
suivantes:
a Les systèmes doivent être installés professionnellement par l'ingénieur ou technicien
formé et qualifié.
b Les systèmes doivent être installés selon les directives recommandées dans le guide
d'installation pour les systèmes extérieurs.
c L'utilisation d'antenne s non approuvée s par Cisco ou modification n on autorisée
pourrait affecter le fonctionnement du système et entraîner des interférences dans la
TDWR et en tant que telle l'opérateur peut être tenu pour responsable de cette
atteinte.
France
For 2.4 GHz, the output power is restricted to 10 mW EIRP when the product is used
outdoors in the band 2454 - 2483.5 MHz. There are no restrictions when used in other parts of
the 2.4 GHz band. Check http://www.arcep.fr/ for more details.
Pour la bande 2,4 GHz, la puissance est limitée à 10 mW en p.i.r.e. pour les équipements
utilisés en extérieur dans la bande 2454 - 2483,5 MHz. Il n'y a pas de restrictions pour des
utilisations dans d'autres parties de la bande 2,4 GHz. Consultez http://www.arcep.fr/ pour
de plus amples détails.
Italy
This product meets the National Radio Interface and the requirements specified in the
National Frequency Allocation Table for Italy. Unless this wireless LAN product is operating
within the boundaries of the owner's property, its use requires a “general authorization.”
Please check http://www.comuni cazioni.it/i t/ for more details.
Loading...