Cisco DFC3A, DFC3BXL, DFC3B User Manual
Catalyst 6500 Series DFC, DFC3A, DFC3B, and
DFC3BXL Installation Note
Product numbers:
WS-F6K-DFC(=)
WS-F6K-DFC3A(=)
WS-F6K-DFC3B(=)
WS-F6K-DFC3BXL(=)
Note Throughout this publication, unless otherwise noted, the term DFC refers to the DFC, DFC3A, DFC3B,
and DFC3BXL.
This publication describes how to install the Catalyst 6500 series Distributed Forwarding Card (DFC)
on Catalyst 6500 series fabric-enabled modules.
Note You can only install the DFC on fabric-enabled modules. See the “Hardware and Software
Requirements” section on page 2 for more information.
Contents
This publication contains these sections:
• Hardware and Software Requirements, page 2
• Safety Overview, page 3
• Parts List, page 7
• Required Tools, page 8
• Installation Guidelines, page 8
Corporate Headquarters:
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Copyright © 2001–2005 Cisco Systems, Inc. All rights reserved.
Hardware and Software Requirements
• Removing the DFC, page 9
• Installing the DFC, page 12
• Related Documentation, page 19
• Obtaining Documentation, page 19
• Documentation Feedback, page 20
• Cisco Product Security Overview, page 20
• Obtaining Technical Assistance, page 21
• Obtaining Additional Publications and Information, page 23
Hardware and Software Requirements
The requirements for using the DFC or DFC3A are as follows:
• DFC Hardware and Software Requirements, page 2
• DFC3A, DFC3B, DFC3BXL Hardware and Software Requirements, page 3
DFC Hardware and Software Requirements
To install and use the DFC, you need the following:
• Catalyst 6500 series switch (Catalyst 6506, 6509, 6509-NEB, or 6513) or Cisco 7600 series router
(Cisco 7606, 7609, or 7613)
• Supervisor Engine 2 with Multilayer Switch Feature Card 2 (MSFC2) running Cisco IOS software
on the Supervisor Engine 2 and MSFC2
Note You cannot have a DFC in a system with a Supervisor Engine 720.
• Fabric-enabled module
• Switch Fabric Module (SFM) (WS-C6500-SFM) or SFM 2 (WS-X6500-SFM2)
Note The SFM must be installed in slot 5 or slot 6 of the 6-slot or the 9-slot chassis. The SFM
cannot be installed in the 3-slot or 13-slot chassis.
Note The SFM 2 must be installed in slot 5 or slot 6 of the 6-slot or the 9-slot chassis or in slot 7
or slot 8 of the 13-slot chassis.
Catalyst 6500 Series DFC, DFC3A, DFC3B, and DFC3BXL Installation Note
2
78-11627-04
DFC3A, DFC3B, DFC3BXL Hardware and Software Requirements
To install and use the DFC3A, DFC3B, or DFC3BXL, you need the following:
• Catalyst 6500 series switch (Catalyst 6503, 6506, 6509, 6509-NEB, or 6513) or Cisco 7600 series
router (Cisco 7603, 7606, 7609, or 7613)
• Supervisor Engine 720 with MSFC3 running Cisco IOS software on the Supervisor Engine 720 and
MSFC3
Note You cannot have a DFC3A, DFC3B, or DFC3BXL in a system with a Supervisor Engine 2.
• Fabric-enabled module
Note Supervisor Engine 720 supports a DFC3A, DFC3B, or DFC3BXL on these WS-X6516-GBIC hardware
revisions:
• Lower than 5.0
• 5.4 and higher
Supervisor Engine 720 does not support a DFC3A, DFC3B, or DFC3BXL on WS-X6516-GBIC
hardware revisions 5.0 through 5.3. With a Supervisor Engine 720 and with a DFC3A, DFC3B, or
DFC3BXL installed, WS-X6516-GBIC hardware revisions 5.0 through 5.3 do not power up.
Without a DFC3A, DFC3B, or DFC3BXL, WS-X6516-GBIC hardware revisions 5.0 through 5.3 operate
in bus mode.
Safety Overview
Safety Overview
Safety warnings appear throughout this publication in procedures that, if performed incorrectly, may
harm you. A warning symbol precedes each warning statement.
78-11627-04
Catalyst 6500 Series DFC, DFC3A, DFC3B, and DFC3BXL Installation Note
3
Safety Overview
Warning
Waarschuwing
IMPORTANT SAFETY INSTRUCTIONS
This warning symbol means danger. You are in a situation that could cause bodily injury. Before you
work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar
with standard practices for preventing accidents. To see translations of the warnings that appear in
this publication, refer to the translated safety warnings that accompanied this device.
Note: SAVE THESE INSTRUCTIONS
Note: This documentation is to be used in conjunction with the specific product installation guide
that shipped with the product. Please refer to the Installation Guide, Configuration Guide, or other
enclosed additional documentation for further details.
BELANGRIJKE VEILIGHEIDSINSTRUCTIES
Dit waarschuwingssymbool betekent gevaar. U verkeert in een situatie die lichamelijk letsel kan
veroorzaken. Voordat u aan enige apparatuur gaat werken, dient u zich bewust te zijn van de bij
elektrische schakelingen betrokken risico's en dient u op de hoogte te zijn van de standaard
praktijken om ongelukken te voorkomen. Voor een vertaling van de waarschuwingen die in deze
publicatie verschijnen, dient u de vertaalde veiligheidswaarschuwingen te raadplegen die bij dit
apparaat worden geleverd.
Opmerking BEWAAR DEZE INSTRUCTIES.
Opmerking Deze documentatie dient gebruikt te worden in combinatie met de
installatiehandleiding voor het specifieke product die bij het product wordt geleverd. Raadpleeg de
installatiehandleiding, configuratiehandleiding of andere verdere ingesloten documentatie voor
meer informatie.
Varoitus
TÄRKEITÄ TURVALLISUUTEEN LIITTYVIÄ OHJEITA
Tämä varoitusmerkki merkitsee vaaraa. Olet tilanteessa, joka voi johtaa ruumiinvammaan. Ennen
kuin työskentelet minkään laitteiston parissa, ota selvää sähkökytkentöihin liittyvistä vaaroista ja
tavanomaisista onnettomuuksien ehkäisykeinoista. Tässä asiakirjassa esitettyjen varoitusten
käännökset löydät laitteen mukana toimitetuista ohjeista.
Huomautus SÄILYTÄ NÄMÄ OHJEET
Huomautus Tämä asiakirja on tarkoitettu käytettäväksi yhdessä tuotteen mukana tulleen
asennusoppaan kanssa. Katso lisätietoja asennusoppaasta, kokoonpano-oppaasta ja muista
mukana toimitetuista asiakirjoista.
Catalyst 6500 Series DFC, DFC3A, DFC3B, and DFC3BXL Installation Note
4
78-11627-04
Safety Overview
Attention
Warnung
IMPORTANTES INFORMATIONS DE SÉCURITÉ
Ce symbole d'avertissement indique un danger. Vous vous trouvez dans une situation pouvant causer
des blessures ou des dommages corporels. Avant de travailler sur un équipement, soyez conscient
des dangers posés par les circuits électriques et familiarisez-vous avec les procédures couramment
utilisées pour éviter les accidents. Pour prendre connaissance des traductions d'avertissements
figurant dans cette publication, consultez les consignes de sécurité traduites qui accompagnent cet
appareil.
Remarque CONSERVEZ CES INFORMATIONS
Remarque Cette documentation doit être utilisée avec le guide spécifique d'installation du produit
qui accompagne ce dernier. Veuillez vous reporter au Guide d'installation, au Guide de
configuration, ou à toute autre documentation jointe pour de plus amples renseignements.
WICHTIGE SICHERHEITSANWEISUNGEN
Dieses Warnsymbol bedeutet Gefahr. Sie befinden sich in einer Situation, die zu einer
Körperverletzung führen könnte. Bevor Sie mit der Arbeit an irgendeinem Gerät beginnen, seien Sie
sich der mit elektrischen Stromkreisen verbundenen Gefahren und der Standardpraktiken zur
Vermeidung von Unfällen bewusst. Übersetzungen der in dieser Veröffentlichung enthaltenen
Warnhinweise sind im Lieferumfang des Geräts enthalten.
Hinweis BEWAHREN SIE DIESE SICHERHEITSANWEISUNGEN AUF
Hinweis Dieses Handbuch ist zum Gebrauch in Verbindung mit dem Installationshandbuch für Ihr
Gerät bestimmt, das dem Gerät beiliegt. Entnehmen Sie bitte alle weiteren Informationen dem
Handbuch (Installations- oder Konfigurationshandbuch o. Ä.) für Ihr spezifisches Gerät.
Figyelem!
Avvertenza
FONTOS BIZTONSÁGI ELÕÍRÁSOK
Ez a figyelmezetõ jel veszélyre utal. Sérülésveszélyt rejtõ helyzetben van. Mielõtt bármely
berendezésen munkát végezte, legyen figyelemmel az elektromos áramkörök okozta kockázatokra,
és ismerkedjen meg a szokásos balesetvédelmi eljárásokkal. A kiadványban szereplõ
figyelmeztetések fordítása a készülékhez mellékelt biztonsági figyelmeztetések között található.
Megjegyzés ÕRIZZE MEG EZEKET AZ UTASÍTÁSOKAT!
Megjegyzés Ezt a dokumentációt a készülékhez mellékelt üzembe helyezési útmutatóval együtt kell
használni. További tudnivalók a mellékelt Üzembe helyezési útmutatóban (Installation Guide),
Konfigurációs útmutatóban (Configuration Guide) vagy más dokumentumban találhatók.
IMPORTANTI ISTRUZIONI SULLA SICUREZZA
Questo simbolo di avvertenza indica un pericolo. La situazione potrebbe causare infortuni alle
persone. Prima di intervenire su qualsiasi apparecchiatura, occorre essere al corrente dei pericoli
relativi ai circuiti elettrici e conoscere le procedure standard per la prevenzione di incidenti. Per le
traduzioni delle avvertenze riportate in questo documento, vedere le avvertenze di sicurezza che
accompagnano questo dispositivo.
Nota CONSERVARE QUESTE ISTRUZIONI
Nota La presente documentazione va usata congiuntamente alla guida di installazione specifica
spedita con il prodotto. Per maggiori informazioni, consultare la Guida all'installazione, la Guida
alla configurazione o altra documentazione acclusa.
78-11627-04
Catalyst 6500 Series DFC, DFC3A, DFC3B, and DFC3BXL Installation Note
5
Safety Overview
Advarsel
Aviso
VIKTIGE SIKKERHETSINSTRUKSJONER
Dette varselssymbolet betyr fare. Du befinner deg i en situasjon som kan forårsake personskade.
Før du utfører arbeid med utstyret, bør du være oppmerksom på farene som er forbundet med
elektriske kretssystemer, og du bør være kjent med vanlig praksis for å unngå ulykker. For å se
oversettelser av advarslene i denne publikasjonen, se de oversatte sikkerhetsvarslene som følger
med denne enheten.
Merk TA VARE PÅ DISSE INSTRUKSJONENE
Merk Denne dokumentasjonen skal brukes i forbindelse med den spesifikke
installasjonsveiledningen som fulgte med produktet. Vennligst se installasjonsveiledningen,
konfigureringsveiledningen eller annen vedlagt tilleggsdokumentasjon for detaljer.
INSTRUÇÕES IMPORTANTES DE SEGURANÇA
Este símbolo de aviso significa perigo. O utilizador encontra-se numa situação que poderá ser
causadora de lesões corporais. Antes de iniciar a utilização de qualquer equipamento, tenha em
atenção os perigos envolvidos no manuseamento de circuitos eléctricos e familiarize-se com as
práticas habituais de prevenção de acidentes. Para ver traduções dos avisos incluídos nesta
publicação, consulte os avisos de segurança traduzidos que acompanham este dispositivo.
Nota GUARDE ESTAS INSTRUÇÕES
Nota Esta documentação destina-se a ser utilizada em conjunto com o manual de instalação
incluído com o produto específico. Consulte o manual de instalação, o manual de configuração ou
outra documentação adicional inclusa, para obter mais informações.
¡Advertencia!
Varning!
INSTRUCCIONES IMPORTANTES DE SEGURIDAD
Este símbolo de aviso indica peligro. Existe riesgo para su integridad física. Antes de manipular
cualquier equipo, considere los riesgos de la corriente eléctrica y familiarícese con los
procedimientos estándar de prevención de accidentes. Vea las traducciones de las advertencias
que acompañan a este dispositivo.
Nota GUARDE ESTAS INSTRUCCIONES
Nota Esta documentación está pensada para ser utilizada con la guía de instalación del producto
que lo acompaña. Si necesita más detalles, consulte la Guía de instalación, la Guía de
configuración o cualquier documentación adicional adjunta.
VIKTIGA SÄKERHETSANVISNINGAR
Denna varningssignal signalerar fara. Du befinner dig i en situation som kan leda till personskada.
Innan du utför arbete på någon utrustning måste du vara medveten om farorna med elkretsar och
känna till vanliga förfaranden för att förebygga olyckor. Se översättningarna av de
varningsmeddelanden som finns i denna publikation, och se de översatta säkerhetsvarningarna som
medföljer denna anordning.
OBS! SPARA DESSA ANVISNINGAR
OBS! Denna dokumentation ska användas i samband med den specifika
produktinstallationshandbok som medföljde produkten. Se installationshandboken,
konfigurationshandboken eller annan bifogad ytterligare dokumentation för närmare detaljer.
Catalyst 6500 Series DFC, DFC3A, DFC3B, and DFC3BXL Installation Note
6
78-11627-04
Parts List
Warning
Parts List
78-11627-04
Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
These parts are in the DFC kit:
• One Catalyst 6500 series DFC, DFC3A, DFC3B, or DFC3BXL
• One disposable grounding wrist strap
• One bag of mounting screws
Catalyst 6500 Series DFC, DFC3A, DFC3B, and DFC3BXL Installation Note
7
Required Tools
Required Tools
These tools are required to install the Catalyst 6500 series DFC:
• Antistatic mat or foam pad to support the removed module
• Number 1 Phillips screwdriver for the screws and cap nuts that fasten the DFC to the module
• Your own ESD-prevention equipment or the disposable grounding wrist strap included with all
upgrade kits, field-replaceable units (FRUs), and spares
Whenever you handle a module, always use a wrist strap or other grounding device to prevent
electrostatic discharge (ESD).
Installation Guidelines
Follow these guidelines when installing a DFC:
• When installing the DFC in a system with a Supervisor Engine 720, observe the following
restrictions for DFC3/PFC3 mismatch:
PFC Version DFC Version Restrictions
PFC3A DFC3A No restrictions.
DFC3B The DFC3B functions as a DFC3A.
DFC3BXL The DFC3BXL functions as a DFC3A.
PFC3B DFC3A You must reset the system after installing a
DFC3A-equipped module.
The PFC3B functions as a PFC3A.
DFC3B No restrictions.
DFC3BXL The DFC3BXL functions as a DFC3B.
PFC3BXL DFC3A You must reset the system after installing a
DFC3A-equipped module.
The PFC3BXL functions as a PFC3A.
DFC3B You must reset the system after installing a
DFC3B-equipped module.
The PFC3BXL functions as a PFC3B.
DFC3BXL No restrictions.
• Observe the following cautions:
Caution During this procedure, wear grounding wrist straps to avoid ESD damage to the module. Do
not directly touch the backplane with your hand or any metal tool, or you could shock
yourself.
Catalyst 6500 Series DFC, DFC3A, DFC3B, and DFC3BXL Installation Note
8
78-11627-04
Loading...