Cisco CTC TV User Manual

Cisco Remote Control Guide

Your CTC | TV service offers many new features and capabilities.

Enjoy your viewing experience and discover the functionality of your

Remote Control and CTC| DVR service with help from this guide.

Troubleshooting Tips

Programing your remote control for your TV:

1. Make sure your TV is turned on.

2. Press and hold the TV Button and the OK Button
on your remote.

3. Release both keys and the mode key will flash twice

4. Enter the following code ______________
using the number keys on your remote.

The mode key will flash three times to indicate that the code was accepted.

5. Point the remote at the TV and press POWER.

6. Did the TV turn off?

If yes, now your remote is programmed to control your TV.
If no, repeat this procedure from Step 2.

Rebooting the Cisco Set Top Box:

Reach to the back of your set top box and pull the black
power cord out for one minute to allow all memory to
drain. After one minute plug the cord back in. It is normal
for the set top box to take up to 10 minutes to reboot.

Default PIN: For access to menu options such as

Parental Controls, the Default PIN # is: 0000

Identifying your set-top box cables

Automatic TV Code Search:

1. Turn on the TV that you want to program your remote to.

2. Point the remote at your TV. Press and hold the TV Button
and the OK Button at the same time.

3. Release both keys and all the mode keys will blink twice.

4. Enter the programming code 922 by pressing the
number keys on the remote. The TV Button will blink
twice indicating a successful entry.

5. Point the remote toward the TV, and press and hold

PLAY. The remote will automatically start testing codes.

6. Keep holding down the PLAY Button and watch your TV.
When a code is found that works your TV will shut off.

7. Release the PLAY Button.

8. Save the code by pressing the ENTER Button on the
remote. The mode keys will flash three times indicating
successful entry.

Note: Pressing the rewind button allows you to go

back if you missed your code or you hold down the
play button too long after your TV shuts off.

Ethernet HDMI Component S Video RCA Cable Coax Power

POWER

Tur ns d evic es on o r of f

STB

Enables set-top mode functions

TV

Enables TV mode functions

DVD

Enables DVD mode functions

AUX

Enables AUX mode functions

1

2

3

4

5

11

12

13

20

21

22

23

24

25

26

27

28

29

30

31

32

14

15

16

17

18

19

6

7

8

9

10

VOL

Adjusts volume

MUTE

Mutes sound

Volume/Mute keys are assigned to the T V when
TV mode key is programmed with a valid code.

NUMERIC KEYS

Enters channel numbers, text and
remote codes. Also use to enter your
parental control PIN

C

LEAR [

*

]

Clears text and numbers in text fields

ENTER [# ]

Enters and saves (Stores) any entry

Changes Video Output

Options: Normal, Stretch, Zoom

Device Control

In STB mode, these keys control DVR

In DVD and AUX modes, these keys may
control your DVD or VCR depending on
how you have programmed the remote.

RECORD

Records the selected program.
Push twice to record the series

STOP

Stops DVR recorded program

PAU SE

Pauses DVR recorded program

PLAY

Plays DVR recorded program

TV/VIDEO

Scrolls through available TV or video
input sources

REW/FF

Rewinds or fast forwards through
DVR content

BACK/SKIP

Skips backward or forward through
DVR content.

PHONE

Not supported at this time

VOD

Not supported at this time

DVR Control

MENU

Accesses the Interactive Program
Gu id e (I P G) , R ec or de d T V, Se rv ic es
and Settings.

DVR

Accesses the DVR list of recordings

LIVE TV

Views live TV

ARROWS

Moves through selections

OK

Selects and deselects screen items

EXIT

Clears all menu screens and returns
to broadcast TV

SEARCH

Accesses the Search menu

INTERACT

Accesses INTERACT content
(Internet and interactive content)

MULTISCREEN

Not supported at this time

INFO

Displays text information about the
selected program. Push twice to
activate quick launch options.

GUIDE

Displays or closes the Interactive
Program Guide (IPG)

JUMP

Jumps to next section or switches to
last channel viewed

CH/PG

Selects the next channel up or down
wh en w atc hi ng T V. M ove s up o r dow n
one page in the IPG and in some
menu screens.

View & Browse Control

Press Interact while
in the Interactive guide
to view cal endar.

Press Interact while
watching stan dard TV to
view channel listings.

Press Play on the remote
control to immediately begin
playback of a DVR recording.

Record can also be used
to delete a DV R recording.

1

2

3

7

4

5

6

8

910

QUICK KEYS

11

12

13

14

15

16

17

18 19

20

21

22

23

25

29

26

27

28

30

31

32

24

Cisco Remote Reference Guide