CISCO AIRONET 1130AG SERIES
IEEE 802.11A/B/G ACCESS POINT
Low-profile enterprise-class access point with integrated antennas for easy deployment in offices and similar
RF environments.
PRODUCT OVERVIEW
Cisco® Aironet® 1130AG Series IEEE 802.11a/b/g access points provide high-capacity, high-security, enterprise-class features in an unobtrusive,
office-class design, delivering WLAN access with the lowest total cost of ownership. With high-performing dual IEEE 802.11a and 802.11g radios,
the Cisco Aironet 1130AG Series provides a combined capacity of up to 108 Mbps to meet the needs of growing WLANs. Hardware-assisted
Advanced Encryption Standard (AES) or temporal key integrity protocol (TKIP) encryption provides uncompromised support for interoperable IEEE
802.11i, Wi-Fi Protected Access 2 (WPA2) or WPA security. Supporting Cisco IOS® Software, the Cisco Aironet 1130AG Series is a component of
the Cisco Structured Wireless-Aware Network (SWAN) framework, a comprehensive framework that delivers an integrated, end-to-end wired and
wireless network. Using the radio and network management features of the Cisco SWAN framework for simplified deployment, along with built-in
omnidirectional antennas that provide robust and predictable WLAN coverage for offices and similar RF environments, the competitively priced
Cisco Aironet 1130AG Series is ready to install and easy to manage, reducing the cost of deployment and ongoing maintenance.
The Cisco Aironet 1130AG Series Access Point incorporates the next generation of Cisco Aironet radio innovation. Two high-performing radios
provide simultaneous support for 802.11a and 802.11g standards, delivering 108 Mbps data rates in the 5 and 2.4 GHz bands to distances surpassing
that of previous-generation radios. Operating on 15 nonoverlapping channels today, and 26 nonoverlapping channels with a future firmware release
(channel support will depend on country regulations), the Cisco Aironet 1130AG Series avoids interference in congested airspace, simplifying the
deployment of high-capacity networks. For smooth migration, the Cisco Aironet 1130AG Series takes full advantage of the dual-band capabilities of
today’s WLAN clients, while providing full backward compatibility for legacy 802.11b clients.
The Cisco Aironet 1130AG Series is part of the award-winning Cisco Wireless Security Suite, which supports 802.11i, WPA2, WPA and numerous
Extensible Authentication Protocol (EAP) types. WPA and WPA2 are the Wi-Fi Alliance certifications for interoperable, standards-based WLAN
security. These certifications support IEEE 802.1X for user-based authentication, TKIP for WPA encryption, and AES for WPA2 encryption. These
certifications help to ensure interoperability between Wi-Fi-certified WLAN devices from different manufacturers.
The hardware-accelerated AES encryption of Cisco Aironet 1130AG Series access points supports enterprise-class, government-grade secure
encryption over the WLAN without compromising performance. IEEE 802.1X authentication helps to ensure that only authorized users are
allowed on the network. Backward compatibility for WPA client devices running TKIP, the RC4 encryption algorithm, is also supported by
the Cisco Aironet 1130AG access point.
Driven by Cisco IOS Software, the Cisco Aironet 1130AG Series is designed for enterprise networks. End-to-end Cisco IOS Software enables
intelligent network services, which provide connectivity, scalability, and high availability for advanced enterprise applications. A component of
the Cisco SWAN framework, the Cisco Aironet 1130AG Series extends the security, scalability, reliability, ease of deployment, and manageability
available in wired networks to the WLAN.
The Cisco Aironet 1130AG Series delivers optimal value for offices and similar environments. Built-in antennas provide omnidirectional coverage
specifically designed for today's open workspaces. A multipurpose mounting bracket easily secures Cisco Aironet 1130AG Series access points to
ceilings and walls. With an unobtrusive design, Cisco Aironet 1130AG Series access points are aesthetically pleasing and blend into their
environments. For maximum concealment, the access point may be placed above ceilings or suspended ceilings. The UL 2043 rating of the Cisco
Aironet 1130AG Series allows the access point to be placed above ceilings in plenum areas regulated by municipal fire codes. Centrally manageable
by the Cisco SWAN management device-the Cisco Wireless LAN Solution Engine (WLSE)-Cisco Aironet 1130AG Series access points can be
systematically and dynamically configured to maximize total network performance. Offered at a competitive price, and optimized for easy installation
and operation, the Cisco Aironet 1130AG Series helps organizations attain a lower total cost of ownership.
APPLICATIONS
In offices and similarly open environments, Cisco Aironet 1130AG Series access points may be installed on the ceiling to provide users with
continuous coverage as they roam throughout a facility (Figure 1). In school buildings and similar facilities, the access points may be installed
on the ceiling of each room and hallway to provide users with full coverage and high network availability (Figure 2). In areas where a ceiling
installation may not be practical such as retail hotspots or similar small facilities, the access points can be mounted simply and securely on walls
for complete coverage with minimal installation cost (Figure 3).
Important notices, privacy statements, and trademarks of Cisco Systems, Inc. can be found on cisco.com.
Inline Power Support (IEEE 802.3af
and Cisco Inline Power)
Cisco IOS Software
• Provides robust signals to long distances
• Mitigates the effects of multipath signal propagation for more consistent coverage
• Allows access point coverage to be tuned for differing requirements
• Low -1dBm setting supports closer spacing of access points in high-density deployments
• Complete system is deployable out of the box without external antennas
• Specifically designed to provide omnidirectional coverage for offices and similar radio frequency
environments
• Provides high security without performance degradation
• Helps to ensure interoperable security with wireless LAN client devices from other manufacturers
• Unobtrusive design blends in to environment
• “Quiet” LED does not draw attention to it when operating normally and no action is required
• Installs easily to walls, ceilings, and suspended ceiling railways
• Accommodates standard padlock to prevent theft
• Provides an interoperable alternative to AC power
• Simplifies deployment by allowing power to be supplied over the Ethernet cable
• Compatible with 802.3af-compliant power sources
• Delivers enterprise-class features for connectivity, scalability, and high availability
SUMMARY/CONCLUSION
The Cisco Aironet 1130AG Series provides the ideal enterprise access point for offices and similar environments. With two high-performance radios,
these access points provide simultaneous support for the 802.11a and 802.11g standards, offering 108 Mbps of capacity for your growing WLAN.
Incorporating AES encryption in hardware, the Cisco Aironet 1130AG Series complies with the 802.11i security standard and is WPA2-certified,
helping to assure that your network employs the strongest security available while maintaining interoperability with products from other
manufacturers. Cisco IOS Software provides intelligent network services for scalable, robust, enterprise connectivity, while the Cisco SWAN
framework integrates wired and wireless networks for end-to-end security, manageability, and mobility. Additional design features, including
diversity antennas with omnidirectional coverage and an unobtrusive form factor, along with an attractive price, provide low total cost of ownership.
For office environments, the Cisco Aironet 1130AG Series is a cost-compelling solution for a high-capacity, high-security, enterprise-class WLAN.
PRODUCT SPECIFICATIONS
Table 2 lists the product specifications for Cisco Aironet 1130AG access points.
Important notices, privacy statements, and trademarks of Cisco Systems, Inc. can be found on cisco.com.
Table 2. Product Specifications for Cisco Aironet 1130AG Access Points
Item Specification
Part Number
Software
Data Rates Supported
Network Standard
Uplink
• AIR-AP1131AG-x-K9
• Regulatory Domains: (x = Regulatory Domain)
• A = FCC
• C = China
• E = ETSI
• J = TELEC (Japan)
• N = North America (Excluding FCC)
Customers are responsible for verifying approval for use in their individual countries. To verify approval and to
identify the regulatory domain that corresponds to a particular country please visit:
http://www.cisco.com/go/aironet/compliance
Not all regulatory domains have been approved. As they are approved, the part numbers will be available on the
Global Price List.
80 ft (24 m) @ 54 Mbps
150 ft (45 m) @ 48 Mbps
200 ft (60 m) @ 36 Mbps
225 ft (69 m) @ 24 Mbps
250 ft (76 m) @ 18 Mbps
275 ft (84 m) @ 12 Mbps
300 ft (91 m) @ 9 Mbps
325 ft (100 m) @ 6 Mbps
Important notices, privacy statements, and trademarks of Cisco Systems, Inc. can be found on cisco.com.
802.11g:
100 ft (30 m) @ 54 Mbps
175 ft (53 m) @ 48 Mbps
250 ft (76 m) @ 36 Mbps
275 ft (84 m) @ 24 Mbps
325 ft (100 m) @ 18 Mbps
350 ft (107 m) @ 12 Mbps
360 ft (110 m) @ 11 Mbps
375 ft (114 m) @ 9 Mbps
802.11a:
100 ft (30 m) @ 54 Mbps
300 ft (91 m) @ 48 Mbps
425 ft (130 m) @ 36 Mbps
500 ft (152 m) @ 24 Mbps
550 ft (168 m) @ 18 Mbps
600 ft (183 m) @ 12 Mbps
625 ft (190 m) @ 9 Mbps
650 ft (198 m) @ 6 Mbps
400 ft (122 m) @ 6 Mbps
420 ft (128 m) @ 5.5 Mbps
440 ft (134 m) @ 2 Mbps
450 ft (137 m) @ 1 Mbps
120 ft (37 m) @ 54 Mbps
350 ft (107 m) @ 48 Mbps
550 ft (168 m) @ 36 Mbps
650 ft (198 m) @ 24 Mbps
750 ft (229 m) @ 18 Mbps
800 ft (244 m) @ 12 Mbps
820 ft (250 m) @ 11 Mbps
875 ft (267 m) @ 9 Mbps
900 ft (274 m) @ 6 Mbps
910 ft (277 m) @ 5.5 Mbps
940 ft (287 m) @ 2 Mbps
950 ft (290 m) @ 1 Mbps
Item Specification
Compliance Standards
Ranges and actual throughput vary based upon numerous environmental factors so individual performance may differ.
Table 3 lists the system requirements for Cisco Aironet 1130AG access points.
Table 3. System Requirements for Cisco Aironet 1130AG Access Points
Access Utilizing Description
Browser Using the Web browser management GUI, requires a computer running Internet Explorer Version 6.0 or newer,
or Netscape Navigator Version 7.0 or newer.
Power over Ethernet (PoE) Power sourcing equipment (PSE) compliant with Cisco Inline Power or IEEE 802.3af, and providing at least
12.2W at 48 VDC.
ORDERING INFORMATION
To place an order, visit the Cisco Ordering Home Page at: http://www.cisco.com/en/US/ordering/index.shtml
Table 4 lists the product part numbers for Cisco Aironet 1130AG access points.
Table 4. Product Part Numbers for Cisco Aironet 1130AG Access Points
Part Number Product Name
AIR-AP1131AG-A-K9 Cisco Aironet 1130AG Series IEEE 802.11a/b/g Access Point, FCC Configuration
AIR-AP1131AG-C-K9 Cisco Aironet 1130AG Series IEEE 802.11a/b/g Access Point, China Configuration
AIR-AP1131AG-E-K9 Cisco Aironet 1130AG Series IEEE 802.11a/b/g Access Point, ETSI Configuration
AIR-AP1131AG-J-K9 Cisco Aironet 1130AG Series IEEE 802.11a/b/g Access Point, Japan Configuration
AIR-AP1131AG-N-K9 Cisco Aironet 1130AG Series IEEE 802.11a/b/g Access Point, North America Configuration (excluding FCC)
SERVICE AND SUPPORT
Cisco offers a wide range of services programs to accelerate customer success. These innovative services programs are delivered through a unique
combination of people, processes, tools, and partners, resulting in high levels of customer satisfaction. Cisco services help you protect your network
investment, optimize network operations, and prepare your network for new applications to extend network intelligence and the power of your
business. For more information about Cisco services, visit Cisco Technical Support Services or Cisco Advanced Services.
FOR MORE INFORMATION
For more information about the Cisco Aironet 1130AG Series, visit:
http://www.cisco.com/go/wireless
For more information about Cisco IOS Software, visit:
http://www.cisco.com/go/ios
For more information about the Cisco SWAN framework, visit:
http://www.cisco.com/go/swan
Important notices, privacy statements, and trademarks of Cisco Systems, Inc. can be found on cisco.com.
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
www.cisco.com
Tel: 408 526-4000
800 553-NETS (6387)
Fax: 408 526-4100
European Headquarters
Cisco Systems International BV
Haarlerbergpark
Haarlerbergweg 13-19
1101 CH Amsterdam
The Netherlands
www-europe.cisco.com
Tel: 31 0 20 357 1000
Fax: 31 0 20 357 1100
Americas Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
www.cisco.com
Tel: 408 526-7660
Fax: 408 527-0883
Asia Pacific Headquarters
Cisco Systems, Inc.
168 Robinson Road
#28-01 Capital Tower
Singapore 068912
www.cisco.com
Tel: +65 6317 7777
Fax: +65 6317 7799
Cisco Systems has more than 200 offices in the following countries and regions. Addresses, phone numbers, and fax numbers are listed on
Argentina • Australia • Austria • Belgium • Brazil • Bulgaria • Canada • Chile • China PRC • Colombia • Costa Rica • Croatia • Cyprus
Czech Republic • Denmark • Dubai, UAE • Finland • France • Germany • Greece • Hong Kong SAR • Hungary • India • Indonesia • Ireland • Israel
Italy • Japan • Korea • Luxembourg • Malaysia • Mexico • The Netherlands • New Zealand • Norway • Peru • Philippines • Poland • Portugal
Puerto Rico • Romania • Russia • Saudi Arabia • Scotland • Singapore • Slovakia • Slovenia • South Africa • Spain • Sweden • Switzerland • Taiwan
Thailand • Turkey • Ukraine • United Kingdom • United States • Venezuela • Vietnam • Zimbabwe
Copyright 2005 Cisco Systems, Inc. All rights reserved. CCSP, CCVP, the Cisco Square Bridge logo, Follow Me Browsing, and StackWise are trademarks of Cisco Systems, Inc.;
Changing the Way We Work, Live, Play, and Learn, and iQuick Study are service marks of Cisco Systems, Inc.; and Access Registrar, Aironet, ASIST, BPX, Catalyst, CCDA, CCDP,
CCIE, CCIP, CCNA, CCNP, Cisco, the Cisco Certified Internetwork Expert logo, Cisco IOS, Cisco Press, Cisco Systems, Cisco Systems Capital, the Cisco Systems logo, Cisco Unity,
Empowering the Internet Generation, Enterprise/Solver, EtherChannel, EtherFast, EtherSwitch, Fast Step, FormShare, GigaDrive, GigaStack, HomeLink, Internet Quotient, IOS, IP/TV, iQ
Expertise, the iQ logo, iQ Net Readiness Scorecard, LightStream, Linksys, MeetingPlace, MGX, the Networkers logo, Networking Academy, Network Registrar, Packet, PIX, PostRouting, Pre-Routing, ProConnect, RateMUX, ScriptShare, SlideCast, SMARTnet, StrataView Plus, TeleRouter, The Fastest Way to Increase Your Internet Quotient, and TransPath are
registered trademarks of Cisco Systems, Inc. and/or its affiliates in the United States and certain other countries.
All other trademarks mentioned in this document or Website are the property of their respective owners. The use of the word partner does not imply a partnership relationship between
Cisco and any other company. (0502R) 205221.h_ETMG_LS_3.05