Cisco AIR-AP1252AG-I-K9, AIR-AP1252AG-A-K9, AIR-AP1252AG-K-K9, AIR-AP1252AG-N-K9, AIR-AP1252AG-P-K9 Datasheet

...

Page 1

Data Sheet

Cisco Aironet 1250 Series Access Point

The Cisco® Aironet® 1250 Series is the first enterprise-class access point to support the IEEE 802.11n draft 2.0 standard. 802.11n offers combined data rates of up to 600 Mbps to provide users with mobile access to high-bandwidth data, voice, and video applications regardless of their location. Through the use of multiple-input multiple-output (MIMO) technology, 802.11n also provides reliable and predictable WLAN coverage to improve the end-user experience for both existing 802.11a/b/g clients and new 802.11n clients.

The robust Cisco Aironet® 1250 Series Access Point (Figure 1) is a modular platform designed to be easily field-upgradeable to support a variety of wireless capabilities. This modularity allows businesses to deploy existing wireless technologies today with the confidence that their network investment will extend to support emerging and future wireless technologies.

The platform was specifically engineered to support the power, throughput, and mechanical requirements of higher-speed WLAN technologies, including 802.11n. Currently, the platform provides both 2.4-GHz and 5-GHz modules compliant with the IEEE 802.11n draft 2.0 standard. As technology evolves, the platform is flexible to support future radio modules designed to deliver intelligent RF services, further enhancing the performance and reliability of the wireless network. The Cisco Aironet 1250 Series is a rugged indoor access point designed for both office and challenging RF environments such as factories, warehouses, hospitals and large retail establishments that require the antenna versatility associated with connectorized antennas, a rugged metal enclosure, and a broad operating temperature range. With a Gigabit Ethernet (10/100/1000) interface, the Cisco Aironet 1250 Series delivers line-rate throughput for higher-speed WLAN technologies such as 802.11n. The access point offers the flexibility of inline as well as local power options.

Figure 1. The Cisco Aironet 1250 Series Access Point

Page 2

Data Sheet

The Cisco Aironet 1250 Series is part of the Cisco Unified Wireless Network. The Cisco Unified Wireless Network is a comprehensive solution that unifies the wired and wireless network to deliver a common set of services and applications, providing users a single experience for any mode of network connectivity, and offering IT simplified operational management. The Cisco Aironet 1250 Series integrates seamlessly with the Cisco Unified Wireless Network. It extends the same industry-leading RF and network management capabilities as currently available across the breadth of Cisco wireless solutions.

The Cisco Aironet 1250 Series has two deployment options: controller-based (unified) or standalone (autonomous). Access points using the Lightweight Access Point Protocol (LWAPP) work in conjunction with Cisco wireless LAN controllers and optionally with the Cisco Wireless Control System (WCS). When configured with LWAPP, the Cisco Aironet 1250 Series simplifies operations by automatically detecting the best-available Cisco Wireless LAN Controller and downloading appropriate policies and configuration information with no manual intervention. When deployed as a standalone access point, the Cisco Aironet 1250 Series delivers a baseline set of features and can later be software-upgraded to take advantage of the full benefits of the Cisco Unified Wireless Network.

Investment Protection

The Cisco Aironet 1250 Series is a modular platform that is compliant with the 802.11n draft 2.0 standard and is the first Wi-Fi CERTIFIED 802.11n draft 2.0 access point. Furthermore, the platform has been tested extensively to ensure simple, secure interoperability with IEEE 802.11n draft 2.0 standard devices. The Cisco Aironet 1250 Series provides additional investment protection with its modular, field-upgradeable design and easy-to-install radio modules. Cisco is committed to standards, and the Cisco Aironet 1250 Series provides a path for compliance to the final IEEE 802.11n standard, once ratified. Businesses with an immediate need to enhance the performance of their WLANs can deploy the IEEE 802.11n draft 2.0 standard radio modules now with the confidence that their investments are protected. These modules can be easily fieldupgraded should this be required by a shift in standards evolution.

Award-Winning Security

The Cisco Aironet 1250 Series supports industry-standard wireless security protocols, including

802.11i, Wi-Fi Protected Access (WPA), WPA2, and 802.1X, along with numerous Extensible Authentication Protocol (EAP) types. The access point delivers hardware-accelerated Advanced Encryption Standard (AES) encryption designed to meet the most stringent enterprise and government encryption requirements without compromising performance. As part of the Cisco Secure Wireless Solution, Cisco Aironet 1250 Series Access Points operating with LWAPP enable comprehensive wired and wireless intrusion prevention and detection. Each access point can scan the RF environment and report on suspicious or unauthorized wireless activity, effectively allowing businesses to create a comprehensive threat defense across 802.11a/b/g and now 802.11n. Additionally, the Cisco Aironet 1250 Series Access Point supports management frame protection for the encryption of 802.11 management frames by the wireless network infrastructure. This allows the network to completely remove the threat from man-in-the-middle and spoofing attacks. If an access point detects a malicious attack, an alarm will be generated and reported to the network administrator.

Page 3

Data Sheet

RF Management

Cisco incorporates unique capabilities within its wireless solution that address the operational challenges of deploying business wireless networks. At the heart of these capabilities are intelligent Radio Resource Management (RRM) algorithms designed to consistently fine-tune WLAN parameters to best meet ongoing performance requirements. RRM allows the Cisco Unified Wireless Network to continuously analyze the existing RF environment and automatically adjust access point power and channel settings to help mitigate such things as co-channel interference and signal coverage problems. Unlike conventional 802.11a/b/g products, the Cisco Aironet 1250 Series uses multiple-input multiple-output (MIMO) technology to take advantage of the effects of RF multipath propagation in order to improve the reliability and predictability of the wireless signal. The Cisco Aironet 1250 Series supports the latest U.S. and European requirements for Dynamic Frequency Selection (DFS), ensuring the access point accurately detects radar events and makes full use of the available 5-GHz spectrum. In addition, the Cisco Aironet 1250 Series supports a Software Defined Radio (SDR) enabling it to be upgraded in the field to support new frequencies and power levels as they are approved for use. These RF management capabilities increase system capacity, perform automated self-healing to compensate for RF dead zones and access point failures, and provide a comprehensive way to manage one of your most precious assets, your corporate spectrum.

Deployment Scenarios

The Cisco Aironet 1250 Series with support for the 802.11n draft 2.0 standard is ideal for a variety of deployment scenarios across many industries. The improved throughput, reliability, and predictability of an 802.11n network meet the requirements that many companies have for moving towards a truly mobile enterprise. Cisco’s next-generation wireless technology is especially beneficial for environments with the following characteristics:

●

Challenging RF environments (for example, manufacturing plants, warehouses, clinical environments)

●

Bandwidth-intensive applications (for example, digital imaging, file transfers, network backup)

●

Real-time, latency-sensitive applications including voice and video

●

Environments that need to support existing 802.11a/b/g and new 802.11n wireless clients

Designed for critical business environments and installations that require antenna versatility, the Cisco Aironet 1250 Series features antenna connectors for improved coverage and aesthetically pleasing installation options. The UL2043 rating of the Cisco Aironet 1250 Series allows the access points to be placed above the ceiling tile in plenum areas regulated by municipal fire codes or suspended from drop ceilings.

Features and Benefits

Table 1 lists the features and benefits of Cisco Aironet 1250 Series Access Points.

Page 4

Data Sheet

Table 1. Features and Benefits of Cisco Aironet 1250 Series Access Points

Feature Benefit

Data Rates of up to 300 Mbps per Radio, 600 Mbps per Access Point

Enhanced Reliability and Predictability

Powerful Platform Engineered to support the power, thermal dissipation, memory, CPU, and Gigabit

Modular Field-Upgradeable Design with Easy-to-Install Modules

2.4-GHz and 5-GHz Radio Modules

Both Inline and Local Powering Options

Extensive Interoperability The Aironet 1250 Series Access Point has undergone extensive interoperability testing

Backward Compatibility with Existing 802.11a/b/g Clients

Integrated RF Management Capabilities

Supports up to 24 nonOverlapping Channels

External RP-TNC Antenna Connectors for Both 2.4-GHz and 5-GHz Radios

Cisco Unified IDS/IPS An integral part of the Cisco Secure Wireless Solution, the industry’s first integrated

Management Frame Protection

Rugged Metal Housing The access point is built with a metal case and sturdy features for deployment in

UL 2043 Plenum Rating and Extended Operating Temperature

Multipurpose and Lockable Mounting Bracket

The 802.11n draft 2.0 standard provides capabilities such as 40-MHz channels, packet aggregation, and block acknowledgement which significantly increase the amount of bandwidth available for user applications. With support for physical layer (PHY) data rates up to 300 Mbps per radio, this represents a greater than five-fold increase over the performance of 802.11a/g networks.

MIMO technology, with its multiple antennas and advanced signal processing, improves coverage, reduces dead spots, and augments overall client throughput. MIMO also enables higher data rates by transmitting multiple spatial streams across the unique paths formed between devices. Enhanced reliability and throughput provides a better overall end-user experience for users relying on the wireless network for business functions.

Ethernet transmission requirements of 802.11n and future wireless technologies. Investment protection through field-upgradeable radios. As technology evolves, radio

modules can be replaced in the field with new radio modules, preserving the investment in the access point chassis and avoiding the expense of installing a new access point.

Dual radios allow simultaneous operation of 2.4-GHz and 5-GHz wireless networks, offering the greatest number of available channels and therefore the greatest system capacity and scalability.

To realize optimal performance, the access point supports both inline power delivered over a single Ethernet cable and local power options.

to ensure simple, secure interoperability with other 802.11 devices. It is the first Wi-Fi CERTIFIED 802.11n draft 2.0 access point, has earned the Intel Connect with Centrino certification, and has undergone extensive testing in 802.11n plug fests.

Protects existing 802.11a/b/g investments and provides an easy migration to 802.11n.

Integrated RF management capabilities address the operational challenges of deploying business wireless networks. These capabilities include Radio Resource Management, MIMO, superior DFS support, SDR certification, and spectrum intelligence integration into WCS. Integrated RF management capabilities increase system capacity, improve system performance, perform automated self-healing to compensate for RF dead zones and access point failures, and provide a comprehensive way to manage one of your most precious assets, your corporate spectrum.

Provides lower potential interference with neighboring access points, which simplifies deployment and reduces co-channel interference for fewer transmission errors and greater throughput. More channels also means that more of the high- throughput, 40MHz channels introduced in the 802.11n draft 2.0 standard are supported.

Antenna connectors support a variety of Cisco 2.4-GHz and 5-GHz antennas, providing range and coverage versatility.

wired and wireless security solution, the access point can monitor the RF environment to detect and locate unauthorized wireless activity, including rogue access points and RF denial of service attacks.

Management frame protection encrypts the management header of the 802.11 packet and enables the access point to detect spoofed frames from malicious users impersonating infrastructure access points. If an access point detects a malicious attack, an alert will be generated and reported back to the network administrator.

rugged environments such as factories, warehouses, and other industrial environments.

Supports installation in environmental air spaces, such as areas above suspended ceilings.

Provides flexibility during site survey and traditional installation as well as helping to deter theft.

Supports 3 2.4-GHz and 21 5-GHz channels in the FCC regulatory domain; channel support varies by

country. See Table 2 for frequency band and operating channel support in your particular regulatory domain.

Page 5

Data Sheet

Summary

The Cisco Aironet 1250 Series Access Point is the first enterprise-class access point to support the IEEE 802.11n draft 2.0 standard. With its modular design, the Cisco Aironet 1250 Series Access Point supports current and future wireless technologies, ensuring investment protection. With both 2.4-GHz and 5-GHz 802.11n draft 2.0 standard radio modules, the access point delivers total data rates of up to 600 Mbps, meeting the performance requirements of the most demanding applications. Integrated MIMO technology provides more reliable coverage and greater throughput for both existing 802.11a/b/g clients and new 802.11n clients in even the most challenging wireless environments. Users can now rely on wireless networks to give them a similar experience to wired networks, providing them with mobile access to high-bandwidth data, voice, and video applications regardless of their location.

Product Specifications

Table 2 lists the product specifications for Cisco Aironet 1250 Series Access Points.

Table 2. Product Specifications for Cisco Aironet 1250 Series Access Points

Item Specification

Part Numbers Access point platform with pre-installed radio modules:

●

AIR-AP1252AG-x-K9 802.11a/g/n-draft 2.0 2.4/5-GHz Modular Autonomous AP; 6 RP-TNC

●

AIR-AP1252G-x-K9 802.11g/n-draft 2.0 2.4-GHz Modular Autonomous AP; 3 RP-TNC

●

AIR-LAP1252AG-x-K9 802.11a/g/n-draft 2.0 2.4/5-GHz Modular Unified AP; 6 RP-TNC

●

AIR-LAP1252G-x-K9 802.11g/n-draft 2.0 2.4-GHz Modular Unified AP; 3 RP-TNC

Individual components:

●

AIR-AP1250= Modular Auto AP Platform (no radio modules); Spare

●

AIR-LAP1250= Modular Unified AP Platform (no radio modules); Spare

●

AIR-RM1252A-x-K9= 802.11a/n-d2.0 5-GHz Radio Module; 3 RP-TNC

●

AIR-RM1252G-x-K9= 802.11g/n-d2.0 2.4-GHz Radio Module; 3 RP-TNC

●

AIR-AP1250MNTGKIT= 1250 Series Ceiling, Wall Mount Bracket kit- Spare

Regulatory domains: (x = regulatory domain)

●

A = FCC

●

C = China

●

E = ETSI

●

I = Israel

●

K = Korea

●

N =Non-FCC

●

P = Japan2

●

S = Singapore

●

T = Taiwan

Customers are responsible for verifying approval for use in their individual countries. To verify approval and to identify the regulatory domain that corresponds to a particular country, please visit:

http://www.cisco.com/go/aironet/compliance.

Not all regulatory domains have been approved. As they are approved, the part numbers will be available on the Global Price List.

Software

Draft 802.11n Version 2.0 (and Related) Capabilities

●

Cisco IOS Software Release 12.4(10b)JA or later (Autonomous Mode).

●

Cisco IOS Software Release 12.4(10b)JX or later (Unified Mode).

●

Cisco Unified Wireless Network Software Release 4.2 or later.

●

2x3 MIMO with two spatial streams

●

Maximal Ratio Combining (MRC)

●

Legacy beamforming (hardware supports this capability; not yet enabled in software)

●

20-and 40-MHz channels

●

PHY data rates up to 300 Mbps

●

Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)

●

802.11 DFS (Bin 5)

●

Cyclic Shift Diversity (CSD) support

Page 6

Data Sheet

Item Specification

Data Rates Supported

Frequency Band and 20-MHz Operating Channels

Note: This varies by regulatory domain. Refer to the product documentation for specific details for each regulatory domain.

802.11a: 6, 9, 12, 18, 24, 36, 48, and 54 Mbps

802.11g: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, and 54 Mbps

802.11n data rates (2.4 GHz and 5 GHz): GI3 = 800ns GI = 400ns MCS Index2 20-MHz Rate

(Mbps)

0 6.5 13.5 7.2 15 1 13 27 14.4 30 2 19.5 40.5 21.7 45 3 26 54 28.9 60 4 39 81 43.3 90 5 52 108 57.8 120 6 58.5 121.5 65 135 7 65 135 72.2 157.5 8 13 27 14.4 30 9 26 54 28.9 60 10 39 81 43.3 90 11 52 108 57.8 120 12 78 162 86.7 180 13 104 216 115.6 240 14 117 243 130 270 15 130 270 144.4 300

-A (Americas (FCC)):

●

2.412 to 2.462 GHz; 11 channels

●

5.180 to 5.320 GHz; 8 channels

●

5.500 to 5.700 GHz, 8 channels (excludes

5.600 to 5.640 GHz)

●

5.745 to 5.825 GHz; 5 channels

-C (China):

●

2.412 to 2.472 GHz; 13 channels

●

5.745 to 5.825 GHz; 5 channels

-E (ETSI):

●

2.412 to 2.472 GHz; 13 channels

●

5.180 to 5.320 GHz; 8 channels

●

5.500 to 5.700 GHz, 11 channels

-I (Israel):

●

2.412 to 2.472 GHz, 13 channels

●

5.180 to 5.320 GHz; 8 channels

-K (Korea):

●

2.412 to 2.472 GHz; 13 channels

●

5.180 to 5.320 GHz; 8 channels

●

5.500 to 5.620 GHz, 7 channels

●

5.745 to 5.805 GHz, 4 channels

40-MHz Rate (Mbps)

-N (Non-FCC):

●

2.412 to 2.462 GHz; 11 channels

●

5.180 to 5.320 GHz; 8 channels

●

5.745 to 5.825 GHz; 5 channels

-P (Japan2):

●

2.412 to 2.472 GHz; 13 channels

●

5.180 to 5.320 GHz; 8 channels

-S (Singapore):

●

2.412 to 2.472 GHz; 13 channels

●

5.180 to 5.320 GHz; 8 channels

●

5.745 to 5.825 GHz; 5 channels

-T (Taiwan):

●

2.412 to 2.462 GHz; 11 channels

●

5.280 to 5.320 GHz; 3 channels

●

5.500 to 5.700 GHz, 11 channels

●

5.745 to 5.825 GHz; 5 channels

20-MHz Rate (Mbps)

40-MHz Rate (Mbps)

MCS Index: The Modulation and Coding Scheme (MCS) index determines the number of spatial streams, the

modulation, the coding rate, and data rate values.

GI: A Guard Interval (GI) between symbols helps receivers overcome the effects of multipath delays.

Page 7

Data Sheet

Item Specification

Maximum Number of NonOverlapping Channels

Note: This varies by regulatory domain—refer to the product documentation for specific details for each regulatory domain. Receive

Sensitivity

Maximum Transmit Power

Note: The maximum power setting will vary by channel and according to individual country regulations. Refer to the product

documentation for specific details.

2.4 GHz

●

802.11b/g:

20 MHz: 3

◦

●

802.11n:

20 MHz: 3

◦

40 MHz: 1

802.11a

–86 dBm @ 6 Mb/s –85 dBm @ 9 Mb/s –82 dBm @ 12 Mb/s –81 dBm @ 18 Mb/s –80 dBm @ 24 Mb/s –79 dBm @ 36 Mb/s –74 dBm @ 48 Mb/s –73 dBm @ 54 Mb/s

5-GHz

802.11n (HT20)

–85 dBm @ MC0 –84 dBm @ MC1 –83 dBm @ MC2 –82 dBm @ MC3 –79 dBm @ MC4 –74 dBm @ MC5 –73 dBm @ MC6 –72 dBm @ MC7 –85 dBm @ MC8 –84 dBm @ MC9 –83 dBm @ MC10 –82 dBm @ MC11 –79 dBm @ MC12 –74 dBm @ MC13 –73 dBm @ MC14 –72 dBm @ MC15

2.4GHz

●

802.11b

23 dBm with 1 antenna

◦

●

802.11g

20 dBm with 1 antenna

◦

●

802.11n (HT20)

◦

17 dBm with 1 antenna 20 dBm with 2 antennas

◦

●

802.11n (HT40)

17 dBm with 1 antenna

◦

20 dBm with 2 antennas

5-GHz

802.11n (HT40)

–85 dBm @ MC0 –84 dBm @ MC1 –83 dBm @ MC2 –79 dBm @ MC3 –76 dBm @ MC4 –71 dBm @ MC5 –70 dBm @ MC6 –69 dBm @ MC7 –85 dBm @ MC8 –84 dBm @ MC9 –83 dBm @ MC10 –79 dBm @ MC11 –76 dBm @ MC12 –71 dBm @ MC13 –70 dBm @ MC14 –69 dBm @ MC15

5 GHz

●

802.11a:

20 MHz: 21

◦

●

802.11n:

20 MHz: 21

◦

40 MHz: 9

802.11b

–90 dBm @ 1 Mb/s –89 dBm @ 2 Mb/s –87 dBm @ 5.5 Mb/s –85 dBm @ 11 Mb/s

2.4-GHz

802.11n (HT20)

–86 dBm @ MC0 –85 dBm @ MC1 –84 dBm @ MC2 –83 dBm @ MC3 –80 dBm @ MC4 –75 dBm @ MC5 –74 dBm @ MC6 –73 dBm @ MC7 –86 dBm @ MC8 –85 dBm @ MC9 –84 dBm @ MC10 –83 dBm @ MC11 –80 dBm @ MC12 –75 dBm @ MC13 –74 dBm @ MC14 –73 dBm @ MC15

5GHz

●

802.11a

17 dBm with 1 antenna

◦

●

802.11n non-HT duplicate (802.11a duplicate) mode

17 dBm with 1 antenna

◦

●

802.11n (HT20)

◦

17 dBm with 1 antenna 20 dBm with 2 antennas

◦

●

802.11n (HT40)

17 dBm with 1 antenna

◦

20 dBm with 2 antennas

802.11g

–87 dBm @ 6 Mb/s –86 dBm @ 9 Mb/s –83 dBm @ 12 Mb/s –82 dBm @ 18 Mb/s –81 dBm @ 24 Mb/s –80 dBm @ 36 Mb/s –75 dBm @ 48 Mb/s –74 dBm @ 54 Mb/s

2.4-GHz

802.11n (HT40)

–86 dBm @ MC0 –85 dBm @ MC1 –84 dBm @ MC2 –80 dBm @ MC3 –77 dBm @ MC4 –72 dBm @ MC5 –71 dBm @ MC6 –70 dBm @ MC7 –86 dBm @ MC8 –85 dBm @ MC9 –84 dBm @ MC10 –80 dBm @ MC11 –77 dBm @ MC12 –72 dBm @ MC13 –71 dBm @ MC14 –70 dBm @ MC15

Page 8

Data Sheet

Item Specification

Available Transmit Power Settings

Note: The maximum power setting will vary by channel and according to individual country regulations. Refer to the product

documentation for specific details.

Antenna Connectors

Interfaces

Indicators

Modularity

Dimensions (W x L x H)

Weight

Environmental Non-operating (storage) temperature: –40 to 185°F (–40 to 85°C)

System Memory ● 64 MB DRAM

Input Power Requirements

Powering Options

Power Draw

Warranty 90 days

2.4GHz

23 dBm (200 mW) 20 dBm (100 mW) 17 dBm (50 mW) 14 dBm (25 mW) 11 dBm (12.5 mW) 8 dBm (6.25 mW) 5 dBm (3.13 mW) 2 dBm (1.56 mW) –1 dBm (0.78 mW)

●

2.4-GHz: 3 RP-TNC connectors

●

5-GHz: 3 RP-TNC connectors

●

10/100/1000BASE-T autosensing (RJ-45)

●

Management console port (RJ45)

●

Status LED indicates operating state, association status, error/warning condition, boot sequence, and maintenance status.

●

Ethernet LED indicates activity over the Ethernet, status.

●

Radio LED indicates activity over the radio, status.

●

Number of radio module slots: 2

●

Available radio modules

Part Number Description Maximum per

AIR-RM1252A-x-K9 2.4 802.11a/n-d2.0 5-GHz Radio Module; 3 RP-TNC 1 AIR-RM1252G-x-K9 802.11g/n-d2.0 2.4-GHz Radio Module; 3 RP-TNC 1

●

AP (without mounting bracket): 8.12 x 9.52 x 2.35 in. (20.62 x 24.18 x 5.97 cm)

●

AP (with mounting bracket): 8.12 x 9.52 x 2.75 in. (20.62 x 24.18 x 6.99 cm)

●

AP with 2 radios installed: 5.1 lbs (2.31 kg)

●

AP chassis: 2.1 lbs (0.95 kg)

●

2.4 GHz radio: 1.5 lbs (0.68 kg)

●

5 GHz radio: 1.5 lbs (0.68 kg)

Operating temperature: –4 to +131°F (–20 to +55°C) Operating humidity: 10 to 90 percent (non-condensing)

●

32 MB flash

●

AP1250: 36 to 57 VDC

●

Power Supply and Power Injector: 100 to 240 VAC; 50 to 60 Hz

●

Cisco Catalyst switch port capable of sourcing 18.5W or greater

●

Cisco AP1250 Power Injector (AIR-PWRINJ4)

●

Cisco AP1250 Local Power Supply (AIR-PWR-SPLY1)

●

802.3af switch (AP1250 with single radio only)

●

AP1250 with two RM1252 radio modules installed: 16.9 W

●

AP1250 with one RM1252 radio module installed: 12.95 W

Note: For an AP1250 with two radios, 16.9 W is the maximum power required at the access point (powered device). When deployed using PoE, the power drawn from the power sourcing equipment will be higher by some amount dependent on the length of the interconnecting cable. This additional power may be as high as 1.6W, bringing the total system power draw (access point + cabling) to 18.5 W. A similar consideration applies for an AP1250 with one radio.

5GHz

20 dBm (100 mW) 17 dBm (50 mW) 14 dBm (25 mW) 11 dBm (12.5 mW) 8 dBm (6.25 mW) 5 dBm (3.13 mW) 2 dBm (1.56 mW) –1 dBm (0.78 mW)

AP1250 platform

Page 9

Item Specification

Compliance Standards

●

Safety:

UL 60950-1

◦

CAN/CSA-C22.2 No. 60950-1 UL 2043

◦

IEC 60950-1 EN 60950-1

◦

●

Radio approvals:

◦

FCC Part 15.247, 15.407 RSS-210 (Canada)

◦

EN 300.328, EN 301.893 (Europe) ARIB-STD 33 (Japan)

◦

ARIB-STD 66 (Japan)

◦

ARIB-STD T71 (Japan) AS/NZS 4268.2003 (Australia and New Zealand)

◦

EMI and susceptibility (Class B) FCC Part 15.107 and 15.109

◦

ICES-003 (Canada)

◦

VCCI (Japan) EN 301.489-1 and -17 (Europe)

◦

EN 60601-1-2 EMC requirements for the Medical Directive 93/42/EEC

●

Security:

802.11i, WPA2, WPA

◦

802.1X AES, TKIP

◦

●

Other:

FCC Bulletin OET-65C

◦

RSS-102

Wireless Network Standards and Wi-Fi Certification

IEEE Standard

●

IEEE 802.11a

●

IEEE 802.11b

●

IEEE 802.11g

●

IEEE 802.11n draft 2.0

●

IEEE 802.11h

●

IEEE 802.11d

Security:

●

WPA™: Enterprise, Personal

●

WPA2™: Enterprise, Personal

EAP Type(s):

●

EAP-Transport Layer Security (TLS)

●

EAP-Tunneled TLS(TTLS)/Microsoft Challenge Handshake Authentication Protocol Version 2 (MSCHAPv2)

●

Protected EAP (PEAP)v0/EAP-MSCHAPv2

●

PEAPv1/EAP-Generic Token Card (GTC)

●

EAP-SIM

Multimedia:

●

WMM™

Data Sheet

Page 10

Data Sheet

Power Options

The Cisco Aironet 1250 Series Access Point may be powered by a Cisco Ethernet switch, a power injector, or a local power supply.

Cisco Ethernet Switch

The number of radio modules determines which Cisco Ethernet switch can power the Aironet 1250 Series access point. There are two scenarios:

Aironet 1250 Series Access Point with one RM1252 radio module installed

The Aironet 1250 Series Access Point with one RM1252 radio module installed requires 12.95W, which is within the 802.3af Power over Ethernet standard. Any Cisco switch supporting 802.3af may be used to power the Aironet 1250 Series Access Point with one RM1252 radio module installed.

Aironet 1250 Series Access Point with two RM1252 radio modules installed

Beginning late 2007, Cisco will enable auto-negotiating, single-port power for the Aironet 1250 Access Point on leading switches across the Catalyst portfolio. This unique, integrated solution provides the full power requirements for dual radio modules and eliminates the need to run an additional cabling drop or insert a separate power injector.

Power Injector

The power injector for Cisco Aironet 1250 Series Access Points (AIR-PWRINJ4) contains an integrated power supply that converts 100 to 240 volts AC into 56 volts DC and then injects this power onto the Category 5 Ethernet cable to power the access point (Figure 2).

Figure 2. Cisco Aironet Power Injector: Providing Inline Power to Cisco Aironet Access Points

As shown in Table 3, a Cisco Aironet Power Injector can be configured to order or can be ordered as a separate item. If the power injector is configured with the access point order, it will ship inside the packaging box of the access point. If the power injector is ordered as a spare, it will ship in a separate box.

Table 3. Cisco Aironet 1250 Series Power Injector Product Numbers

Product Number Product Description

AIR-PWRINJ4 Cisco Aironet Power Injector for the 1250 Series AIR-PWRINJ4= Cisco Aironet Power Injector for the 1250 Series (Spare)

Page 11

Data Sheet

Power Injector Product Specifications

Table 4 shows the product specifications for the Cisco Aironet Power Injector for the Aironet 1250 Series Access Point.

Table 4. Specifications of Cisco Aironet Power Injector for the Cisco Aironet 1250 Series

Description Cisco Aironet Power Injector for Cisco Aironet 1250 Series

Part Number AIR-PWRINJ4 LAN Connection

Device Connection

LEDs AC Power Status, Access Point Power Status and Fault Electrical

Dimensions 6.54 x 3.15 x 1.73 in. (16.6 x 8 x 4.4 cm) Weight 13.8 oz (390 grams) Environmental

Compliance Standards

●

Max Category 5 cable length: 100m from switch to device

●

Type: RJ-45

●

Label: 10/100/1000 BASE-TX To SWITCH

●

Max Cat 5 cable length: 100m from switch to device

●

Type: RJ-45

●

Label: 10/100/1000BASE-TX To AP

●

Integrated power supply

●

Input voltage: 100–240 VAC, 50/60 Hz

●

Input current: 0.95A

●

Output voltage: 56 VDC

●

Output current: 0.550A

●

Non-operating temperature: –40 to +176°F (–40 to +85°C)

●

Operating temperature: –4 to +131°F (–20 to +55°C)

●

Safety:

UL 60950-1

◦

CAN/CSA-C22.2 No. 60950-1

◦

IEC 60950-1

◦

EN 60950-1

Power Supply

The Cisco Aironet 1250 Power Supply is a 100- to 240-VAC power supply that provides 56 VDC to locally power the access point.

As shown in Table 5, a Cisco Aironet power supply can be configured to order or can be ordered as a separate item. If the power supply is configured with the access point order, it will ship inside the packaging box of the access point. If the power injector is ordered as a spare, it will ship in a separate box.

Table 5. Cisco Aironet 1250 Power Supply Product Numbers

Product Number Product Description

AIR-PWR-SPLY1 Power Supply for 1250 Series AIR-PWR-SPLY= Power Supply for 1250 Series (Spare)

Ordering Information

To place an order, visit the Cisco Ordering Website at

http://www.cisco.com/en/US/ordering/index.shtml.

Table 6 lists the product part numbers for Cisco Aironet 1250 Access Points.

Table 6. Product Part Numbers for Cisco Aironet 1250 Access Points

Page 12

Data Sheet

Part Number Description

AIR-AP1252AG-A-K9 802.11a/g/n-draft 2.0 2.4/5-GHz Modular Autonomous AP; 6 RP-TNC; FCC configuration AIR-AP1252AG-C-K9 802.11a/g/n-draft 2.0 2.4/5-GHz Modular Autonomous AP; 6 RP-TNC; China configuration AIR-AP1252AG-E-K9 802.11a/g/n-draft 2.0 2.4/5-GHz Modular Autonomous AP; 6 RP-TNC; ETSI configuration AIR-AP1252AG-I-K9 802.11a/g/n-draft 2.0 2.4/5-GHz Modular Autonomous AP; 6 RP-TNC; Israel configuration AIR-AP1252AG-K-K9 802.11a/g/n-draft 2.0 2.4/5-GHz Modular Autonomous AP; 6 RP-TNC; Korea configuration AIR-AP1252AG-N-K9 802.11a/g/n-draft 2.0 2.4/5-GHz Modular Autonomous AP; 6 RP-TNC; Non-FCC configuration AIR-AP1252AG-P-K9 802.11a/g/n-draft 2.0 2.4/5-GHz Modular Autonomous AP; 6 RP-TNC; Japan2 configuration AIR-AP1252AG-S-K9 802.11a/g/n-draft 2.0 2.4/5-GHz Modular Autonomous AP; 6 RP-TNC; Singapore config AIR-AP1252AG-T-K9 802.11a/g/n-draft 2.0 2.4/5-GHz Modular Autonomous AP; 6 RP-TNC; Taiwan configuration AIR-AP1252G-A-K9 802.11g/n-draft 2.0 2.4-GHz Modular Autonomous AP; 3 RP-TNC; FCC configuration AIR-AP1252G-E-K9 802.11g/n-draft 2.0 2.4-GHz Modular Autonomous AP; 3 RP-TNC; ETSI configuration AIR-AP1252G-P-K9 802.11g/n-draft 2.0 2.4-GHz Modular Autonomous AP; 3 RP-TNC; Japan2 configuration AIR-LAP1252AG-A-K9 802.11a/g/n-draft 2.0 2.4/5-GHz Modular Unified AP; 6 RP-TNC FCC configuration AIR-LAP1252AG-C-K9 802.11a/g/n-draft 2.0 2.4/5-GHz Modular Unified AP; 6 RP-TNC China configuration AIR-LAP1252AG-E-K9 802.11a/g/n-draft 2.0 2.4/5-GHz Modular Unified AP; 6 RP-TNC ETSI configuration AIR-LAP1252AG-I-K9 802.11a/g/n-draft 2.0 2.4/5-GHz Modular Unified AP; 6 RP-TNC Israel configuration AIR-LAP1252AG-K-K9 802.11a/g/n-draft 2.0 2.4/5-GHz Modular Unified AP; 6 RP-TNC Korea configuration AIR-LAP1252AG-N-K9 802.11a/g/n-draft 2.0 2.4/5-GHz Modular Unified AP; 6 RP-TNC Non-FCC configuration AIR-LAP1252AG-P-K9 802.11a/g/n-draft 2.0 2.4/5-GHz Modular Unified AP; 6 RP-TNC Japan2 configuration AIR-LAP1252AG-S-K9 802.11a/g/n-draft 2.0 2.4/5-GHz Modular Unified AP; 6 RP-TNC Singapore configuration AIR-LAP1252AG-T-K9 802.11a/g/n-draft 2.0 2.4/5-GHz Modular Unified AP; 6 RP-TNC Taiwan configuration AIR-LAP1252G-A-K9 802.11g/n-draft 2.0 2.4-GHz Modular Unified AP; 3 RP-TNC; FCC configuration AIR-LAP1252GN-E-K9 802.11g/n-draft 2.0 2.4-GHz Modular Unified AP; 3 RP-TNC; ETSI configuration AIR-LAP1252GN-P-K9 802.11g/n-draft 2.0 2.4-GHz Modular Unified AP; 3 RP-TNC; Japan2 configuration AIR-RM1252A-A-K9= 802.11a/n-draft 2.0 5-GHz Radio Module; 3 RP-TNC; FCC configuration; spare AIR-RM1252A-C-K9= 802.11a/n-draft 2.0 5-GHz Radio Module; 3 RP-TNC; China configuration; spare AIR-RM1252A-E-K9= 802.11a/n-draft 2.0 5-GHz Radio Module; 3 RP-TNC; ETSI configuration; spare AIR-RM1252A-I-K9= 802.11a/n-draft 2.0 5-GHz Radio Module; 3 RP-TNC; Israel configuration; spare AIR-RM1252A-K-K9= 802.11a/n-draft 2.0 5-GHz Radio Module; 3 RP-TNC; Korea configuration; spare AIR-RM1252A-N-K9= 802.11a/n-draft 2.0 5-GHz Radio Module; 3 RP-TNC; Non-FCC configuration; spare AIR-RM1252A-P-K9= 802.11a/n-draft 2.0 5-GHz Radio Module; 3 RP-TNC; Japan2 configuration; spare AIR-RM1252A-S-K9= 802.11a/n-draft 2.0 5-GHz Radio Module; 3 RP-TNC; Singapore configuration; spare AIR-RM1252A-T-K9= 802.11a/n-draft 2.0 5-GHz Radio Module; 3 RP-TNC; Taiwan configuration; spare AIR-RM1252G-A-K9= 802.11g/n-draft 2.0 2.4-GHz Radio Module; 3 RP-TNC; FCC configuration; spare AIR-RM1252G-E-K9= 802.11g/n-draft 2.0 2.4-GHz Radio Module; 3 RP-TNC; ETSI configuration; spare AIR-RM1252G-P-K9= 802.11g/n-draft 2.0 2.4-GHz Radio Module; 3 RP-TNC; Japan2 configuration; spare AIR-AP1250= Modular Autonomous AP Platform (no radio modules); Spare AIR-LAP1250= Modular Unified AP Platform (no radio modules); Spare AIR-AP1250MNTGKIT= 1250 Series Ceiling, Wall Mount Bracket kit; Spare

Page 13

Data Sheet

Service and Support

Cisco and our Wireless LAN Specialized Partners offer a broad portfolio of end-to-end services based on proven methodologies for planning, designing, implementing, operating, and optimizing the performance of a variety of secure voice and data wireless network solutions, technologies, and strategies. Cisco Wireless LAN Specialized Partners bring application expertise to help deliver a secure enterprise mobility solution with a low total cost of ownership. For more information about Cisco Services for wireless LAN, visit

http://www.cisco.com/go/wirelesslanservices.

For More Information

For more information about the Cisco Aironet 1250 Series, visit or contact your local account representative.

http://www.cisco.com/go/wireless

Printed in USA C78-423375-01 11/07