V
e
ed
Field
rifi
Configuration Guide
Airespace Wireless Enterprise Platform – AireOS
June 2008 Edition
1725-36047-001
Version G
AS-2000 switch/controller
with AP-10xx Access Point
Field Verified Configuration Guide
Trademark Information
Polycom® and the logo designs
SpectraLink®
LinkPlus
Link
NetLink
SVP
Are trademarks and registered trademarks of
Polycom, Inc. in the United States of America
and various countries. All other trademarks
used herein are the property of their respective
owners.
Patent Information
The accompanying product is protected by one
or more US and foreign patents and/or pending
patent applications held by Polycom, Inc.
Copyright Notice
Copyright © 2003 to 2008 Polycom, Inc.
All rights reserved under the International and
pan-American copyright Conventions.
No part of this manual, or the software
described herein, may be reproduced or
transmitted in any form or by any means, or
translated into another language or format, in
whole or in part, without the express written
permission of Polycom, Inc.
Do not remove (or allow any third party to
remove) any product identification, copyright or
other notices.
Notice
Polycom, Inc. has prepared this document for
use by Polycom personnel and customers. The
drawings and specifications contained herein
are the property of Polycom and shall be neither
reproduced in whole or in part without the prior
written approval of Polycom, nor be implied to
grant any license to make, use, or sell equipment
manufactured in accordance herewith.
Polycom reserves the right to make changes in
specifications and other information contained
in this document without prior notice, and the
reader should in all cases consult Polycom to
determine whether any such changes have been
made.
No representation or other affirmation of fact
contained in this document including but not
limited to statements regarding capacity,
response-time performance, suitability for use,
or performance of products described herein
shall be deemed to be a warranty by Polycom
for any purpose, or give rise to any liability of
Polycom whatsoever.
Contact Information
Please contact your Polycom Authorized
Reseller for assistance.
Polycom, Inc.
4750 Willow Road,
Pleasanton, CA 94588
http://www.polycom.com
Every effort has been made to ensure that the
information in this document is accurate.
Polycom, Inc. is not responsible for printing or
clerical errors. Information in this document is
subject to change without notice and does not
represent a commitment on the part of Polycom,
Inc.
2
PN: 1725-36047-001_G.doc
Airespace Wireless Enterprise Platform—AireOS AS-2000 Switch Controller with AP10-xx Access Point
Introduction
Customers have reported that the WLAN products described in this
document operate adequately with SpectraLink Wireless Telephones
at their location using the software version listed below. For Field
Verified WLAN products, Polycom has not conducted any testing and
therefore cannot guarantee interoperability or performance. Polycom
technical support of interoperability issues for WLAN products
running versions of software not listed in the table may be subject to
time and materials charges.
This document describes the configuration of the Airespace Wireless
Enterprise Platform and the AireOS for best known operation with
SpectraLink Wireless Telephones.
Product Summary
Manufacturer: Airespace: www.cisco.com
Approved product(s) : AS-2000 switch/controller with AP-10xx access point
RF technology: Direct-sequence spread spectrum (DS), 2.4 GHz
Radio: 2.4 – 2.484 GHz (802.11b/g)
Required AP software version: Firmware version 2.0 †
SpectraLink handset models: ** e340/h340/i640 8020/8030
SpectraLink radio mode: 802.11b 802.11b
Maximum telephone calls per AP: 12 * 12 *
AP configuration parameters: See Access Point Configuration below
Indoor range (typical): See vendor specifications for AP
Required network topology: Switched Ethernet
Network constraints: Dedicated segment for wireless, single subnet
WEP capability: Yes *
ESSID auto-learn function: Yes *
†
Earlier and later software versions have not been validated except as noted.
* Telephone calls per AP must be configured in the system per documentation provided by Polycom.
** SpectraLink handset models 8020/8030, e340/h340/i640 and their OEM derivates are known
interoperable at one or more customer sites with the WLAN hardware and software identified in the
table. Throughout the remainder of this document they will be referred to collectively as “SpectraLink
Wireless Telephones”.
PN: 1725-36047-001_G.doc
3
Field Verified Configuration Guide
Access Point Capacity and Positioning
Please refer to the Polycom Deploying Enterprise-Grade Wi-Fi Telephony
white paper. This document covers the security, coverage, capacity
and QoS considerations necessary for ensuring excellent voice quality
with enterprise Wi-Fi networks. For more detailed information on
wireless LAN layout, network infrastructure, QoS, security and
subnets, please see the Best Practices Guide for Deploying SpectraLink
8020/8030 Wireless Telephones. This document identifies issues and
solutions based on Polycom’s extensive experience in enterprise-class
Wi-Fi telephony, and provides recommendations for ensuring that a
network environment is adequately optimized for use with
SpectraLink 8020/8030 Wireless Telephones.
VLAN Support
The Airespace Wireless Enterprise Platform with the AireOS
operating system has the ability to manage different VLANs, each
with a unique SSID. Many times customers will choose to place voice
devices on a separate VLAN from data devices or they may choose to
segment their network based on security policies.
When VLANs are enabled, the Wireless Enterprise Platform uses
802.1Q tags on traffic entering onto the wired network. These tags
must be removed by a VLAN-capable switch before the packets reach
the SpectraLink 8000 Telephony Gateway or SpectraLink 8000 SVP
Server. On most switches, the switch port to which the SpectraLink
8000 Telephony Gateway or SpectraLink 8000 SVP Server is connected
must be configured as a non-trunked, or access port dedicated to the
voice VLAN. If the port is set to trunked, the SpectraLink 8000 System
equipment will not recognize the packet.
If you are using a switch that is not capable of removing these 802.1Q
tags, the SpectraLink Wireless Telephones must reside on the native
(or management) VLAN.
Notes on Configuration
The AP must support SpectraLink Voice Priority (SVP). Contact
your AP vendor if you need to upgrade the AP software.
If you encounter difficulties or have questions regarding the
configuration process, please contact the Customer Support Hotline at
(800) 775-5330. The hotline is open Monday through Friday,
6 a.m. to 6 p.m. Mountain time.
4
PN: 1725-36047-001_G.doc
Airespace Wireless Enterprise Platform—AireOS AS-2000 Switch Controller with AP10-xx Access Point
Access Point Configuration
1. Connect to the Airespace switch or controller via Netscape or
Internet Explorer by navigating to the URL http://<IP_Addr>
(where <IP_Addr> is the IP address of the switch or controller).
2. The following table shows additional settings for the 802.11b
Network configuration. Navigate to this page by clicking the
Wireless tab at the top of the screen and 802.11b Network in the
navigation pane.
Parameter Setting Criticality
802.11b Network Status Checked Required
Data rates: 1.0 Mandatory Required
2.0 Mandatory Required
5.5 Mandatory/Supported * Required
11 Mandatory/Supported * Required
Beacon period (Kusec) 100 Required
Antenna Diversity Required
Enable short preamble Not Checked Required
* For optimum capacity, set Mandatory if handsets are all operating at 11 Mb/s and the SpectraLink 8000
SVP Server is installed.
3. Click the Apply button to save the changes.
4. Click the
Auto-RF button, to the right of the Apply button.
5. The following table shows additional parameters for the
configuration. Scroll to the bottom of the page to enter these
parameters.
Parameter Setting Criticality
Noise measurement 3600 Required
Load measurement 3600 Required
Signal measurement 3600 Required
Coverage measurement 3600 Required
Auto-RF
PN: 1725-36047-001_G.doc
5
Field Verified Configuration Guide
6. The following table shows additional settings for the
Switch/General configuration. Navigate to this page by clicking the
Switch tab at the top of the screen and General in the navigation
pane.
Parameter Setting Criticality
Enable multicast support Enabled Required
7. Click the Apply button to save the changes
8. The following table shows additional settings for the
configuration. Navigate to this page by clicking the
the top of the page and then clicking the
Edit button for the WLAN
WLAN
WLAN tab at
you are using for the SpectraLink Wireless Telephones.
Parameter Setting Criticality
Radio policy 802.11b only Recommended
Admin status Checked Required
Session timeout 0 (zero) Required
Quality of service Gold Required
Blacklist timeout 60 Recommended
DHCP required As required by installation
DHCP server IP address As required by installation
VLAN As required by installation
Layer 2 security Static WEP Recomm ended
MAC filtering Not checked Recommended
Layer 3 security None Required
Web authentication Not checked Required
WEP key size * 40 or 104 bits Recommended
Key index * As require d for installation Recommended
Encryption key * As required for installation Recommended
Key format * Hex Recommended
* These parameters are required if Static WEP is selected for Layer 2 security.
9. Click the Apply button to save the changes.
10. Click the
The Airespace Wireless Enterprise Platform is now ready for use with
SpectraLink Wireless Telephones. No restart of the system is required.
All parameters take effect when applied.
6
Save Configuration link at the top of the browser window
to ensure the configuration is available across system restarts.
PN: 1725-36047-001_G.doc
Loading...