Cisco 7600 Series, WS-F6700-DFC3CXL - Distributed Forwarding Card 3CXL Hardware Manual

Contents

Guide to Supported Hardware for Cisco 7600
Series Routers with Cisco IOS Release 12.2SR

This publication lists the supported hardware for Cisco 7600 series routers with Cisco IOS Release 12.2
SR.

Use this publication with the Cross-Platform Release Notes for Cisco IOS Release 12.2SR.

This publication contains these sections:

• Document Revision History, page 2

• Supported Hardware, page 7

• Unsupported Hardware, page 118

• Related Documentation, page 120

• Obtaining Documentation, Obtaining Support, and Security Guidelines, page 121

OL-10362-13

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 15S

1

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR

Document Revision History

Document Revision History

Revision Date Change Summary

OL-10362-13 July, 2010 Added the following for Cisco IOS release 15.0(1)S:

• Support for the ACE30-MOD-K9 service module.

• Support for SPA-1xOC3-ATM-V2, SPA-3xOC3-ATM-V2 on

SIP- 200 and SIP- 400.

• Support for SPA-1xOC12-ATM-V2 on SIP- 400

• Support for SPA-2X1GE-SYNCE on SIP-400

• Support for DWDM-XFP-C optics to ES+ 10GE line cards

and 10GE SPAs.

• Support for GLC-GE-100FX optics to ES20 GE, ES+ GE line

cards and 1GE SPAs.

• Support for ONS-SC-OC3-EL optics to ATM and POS SPAs.

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 15S

2

OL-10362-13

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR

Revision Date Change Summary

OL-10362-12 April, 2010 Added the following for Cisco IOS release 12.2(33)SRE1:

• Added support for 40 DWDM SFPs to RSP 720:

–

RSP720-3C-GE

–

RSP-720-3CXL-GE

–

RSP720-3C-10GE

–

RSP-720-3CXL-10GE

• Added support for 8 additional DWDM SFPs

(DWDM-SFP-3346, DWDM-SFP-3739, DWDM-SFP-4134,
DWDM-SFP-4532, DWDM-SFP-4931, DWDM-SFP-5332,
DWDM-SFP-5736, DWDM-SFP-6141) to:

–

WS-SUP32-10GE-3B

–

WS-SUP32-GE-3B

–

WS-X6724-SFP

–

WS-X6748-SFP

• Added support for 8 additional CWDM SFPs

(CWDM-SFP-1470, CWDM-SFP-1490, CWDM-SFP-1510,
CWDM-SFP-1530, CWDM-SFP-1550, CWDM-SFP-1570,
CWDM-SFP-1590, CWDM-SFP-1610) to RSP 720:

Document Revision History

–

RSP720-3C-GE

–

RSP-720-3CXL-GE

–

RSP720-3C-10GE

–

RSP-720-3CXL-10GE

• Added support for XFP-10G-MM-SR to the following line

cards and SIPs:

–

7600ES+2TG3C, 7600ES+2TG3CXL

–

7600ES+4TG3C, 7600ES+4TG3CXL

–

76-ES+XC-20G3C, 76-ES+XC-20G3CXL

–

76-ES+XC-40G3C, 76-ES+XC-40G3CXL

–

76-ES+XT-2TG3C, 76-ES+XT-2TG3CXL

–

76-ES+XT-4TG3C, 76-ES+XT-4TG3CXL

–

76-ES+T-2TG3CXL, 76-ES+T-20G3CXL

–

76-ES+T-4TG3CXL, 76-ES+T-40G3CXL

–

SIP-400, SIP-600 on 10GE SPA

• Added support for WAN/OTN to the following line cards:

–

76-ES+XC-20G3C

–

76-ES+XC-20G3CXL

OL-10362-13

–

76-ES+XC-40G3C

–

76-ES+XC-40G3CXL

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 15S

3

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR

Document Revision History

Revision Date Change Summary

OL-10362-11 December, 2009 Added the following for Cisco IOS release 12.2(33)SRE:

• Added support for the following ES+ Combo cards:

–

76-ES+XC-40G3CXL

–

76-ES+XC-40G3C

–

76-ES+XC-20G3CXL

–

76-ES+XC-20G3C

–

SFP-GE-T/S/L/Z support on X6724/X6748

–

DWDM-X2-xx.xx and X2-10GB-LRM, X2 10GB-ZR
support on 7600 cards (RSP720-10GE and
WS-X6708-10GE)

–

DWDM-X2-xx.xx and X2-10GB-LRM, X2 10GB-ZR
support on 7600 cards (RSP720-10GE and
WS-X6708-10GE)

–

Enabled support for additional DWDM SFPs
(DWDM-SFP-3346, DWDM-SFP-3739,
DWDM-SFP-4134, DWDM-SFP-4532,
DWDM-SFP-4931, DWDM-SFP-5332,
DWDM-SFP-5736, DWDM-SFP-6141) in ES+ and
ES+Combo

–

Enabled support for additional DWDM SFPs
(DWDM-SFP-3346, DWDM-SFP-3739,
DWDM-SFP-4134, DWDM-SFP-4532,
DWDM-SFP-4931, DWDM-SFP-5332,
DWDM-SFP-5736, DWDM-SFP-6141) in
ES20/SIP400/SIP600 (HW)

–

PWR-4500-DC Power Supply

• 76-ES+XT-2TG3C

• 76-ES+XT-4TG3C

• Support for ES+ transport card is extended to12.2(33) SRE

• Added support for SFP-OC3-LR1to SPA-1XCHSTM1/OC3

on SIP-400

OL-10362-10 May, 2009 Added the following for Cisco IOS release 12.2(33)SRD4:

• Added support for the following ES+ transport cards:

–

76-ES+T-20G

–

76-ES+T-40G

–

76-ES+T-2TG

–

76-ES+T-4TG

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 15S

4

OL-10362-13

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR

Revision Date Change Summary

OL-10362-9 May, 2009 Added the following for Cisco IOS release 12.2(33)SRD2:

• Added support for SFP-GE-T, SFP-GE-S, SFP-GE-L, and

SFP-GE-Z to WS-X6724-SFP and WS-X6748-SFP line
cards.

• Added support for ONS-SC-155-EL to the

SPA-1ChOC3-CE-ATM on the SIP-400 and to the
SPA-1XCHSTM1/OC3 on the SIP-400.

OL-10362-8 February, 2009 Added the following for Cisco IOS release 12.2(33)SRD1:

• 76-ES+XT-2TG3CXL

• 76-ES+XT-4TG3CXL

OL-10362-7 October, 2008 Added the following for Cisco IOS release 12.2(33)SRD:

• 7600-ES+2TGCXL

• 7600-ES+2TG3C

• 7600-ES+4TGCXL

• 7600-ES+4TG3C

Document Revision History

• 7600-ES+40G3C

• 7600-ES+20G3CXL

• 7600-ES+20G3C

• 7600-ES+40G3CXL

• CWDM SFP Support

• DWDM SFP Support

• XFP-10GER-OC192IR= Version 2 XFP support

• SFP-GE-T= with ES40 Line Card Support

• XFP-10GZR-OC192LR+= XFP Support

• support BX optics (GLC-BX-U=, GLC-BX-D=) with GE

SPA (SIP line cards), ES20 & ES40 line cards

• DWDM XFP support

• SPA-8X1FE-TX-V2 and SPA-4X1FE-TX-V2 Support on

SIP-400

• Network Analysis Modules (NAMs) Support for

RSP720-10GE

OL-10362-6 May, 2008 Added the following for Cisco IOS release 12.2(33)SRC1:

• SPA-4XT-Serial SPA support on SIP-200

OL-10362-13

• Additional DWDM XFP support for ES20 line card, SIP-400,

and SIP-600

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 15S

5

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR

Document Revision History

Revision Date Change Summary

OL-10362-5 April, 2008 Added the following for Cisco IOS release 12.2(33)SRB3:

• DWDM XFP support on Cisco 7600 ES20 line card and

SIP-600

• SFP-GE-T support on Cisco 7600 ES20 line card, SIP-400,

and SIP-600

• CWDM SFP support on Cisco 7600 ES20 line card

OL-10362-4 January, 2008 Added the following for Cisco IOS release 12.2(33)SRC:

• SPA-2CHT3-CE-ATM on SIP-400

• WS-X6708-10G-3C, WS-X6708-10G-3CXL

• RSP720-3C-10GE, RSP720-3CXL-10GE

• SPA-1X10GE-L-V2 on the SIP-400

• SPA-1xCHSTM1/OC3 on the SIP-400

• SFP-GE-T Support on the SIP-400, SIP-600, and Ethernet

Services 20G line cards

• SPA-2XCT3/DS0, SPA-4XCT3/DS0 support on SIP-400

• SPA-8XCHT1/E1 on the SIP-400

• SPA-2XT3/E3, SPA-4XT3/E3 support on SIP-400

• Wireless Services Module (WiSM)

OL-10362-3 June, 2007 Added the following for Cisco IOS release 12.2(33)SRB1:

• Cisco 7606-S router chassis

• Cisco 7603-S router chassis

• 1500 W DC input (PWR-1500-DC) power supply

• XFP-10GZR-OC192LR Gigabit Ethernet Transceiver

Module

• Cisco 7600 Series ACE 20 HW for Session Border Controller

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 15S

6

OL-10362-13

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR

Revision Date Change Summary

OL-10362-2 February, 2007 Added the following for Cisco IOS release 12.2SRB:

• RSP 720

• Policy Feature Card 3C

• Policy Feature Card 3CXL

• Distributed Forwarding Card 3CXL

• SFP-GE-S, SFP-GE-L, SFP-GE-Z

• 1-Port and 24-Port Channelized CEoP SPAs

• Ethernet Services 20G line cards

• Application Control Engine (ACE) Module

• Service Application Module for IP

• 6000 W DC power supply

• Cisco 7609-S router chassis

OL-10362-1 May, 2006 Initial version

Supported Hardware

Supported Hardware

These sections describe the hardware supported in Cisco IOS Release 12.2SR:

• Supervisor Engines, page 8

• Policy Feature Cards, page 24

• Distributed and Centralized Forwarding Cards, page 26

• XENPAKs, page 32

• X2 Modules, page 33

• Small Form-Factor Pluggable Modules (SFPs), page 42

• 10-Gigabit Ethernet Transceiver Modules, page 43

• DWDM-XFP Modules, page 43

• Power over Ethernet Daughtercards, page 46

• 10/100/1000 Ethernet Switching Modules, page 47

• Fast Ethernet Switching Modules, page 50

• Ethernet/Fast Ethernet (10/100) Switching Modules, page 52

• Ethernet Switching Modules, page 56

• Optical Services Modules (OSMs), page 56

• SPA Interface Processors (SIPs), page 59

• SIP-400 Combinations, page 60

• Services SPA Carrier (SSC), page 68

OL-10362-13

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 15S

7

Supported Hardware

Note • Use the values in the “Power Required” column to determine the exact power requirements for your

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR

• Services SPAs, page 69

• Enhanced FlexWAN Module, page 69

• Enhanced FlexWAN Module Port Adapters, page 69

• Ethernet Services 20G Line Cards, page 70

• Ethernet Services 40G Line Cards, page 76

• ES+ Transport line cards start here, page 91

• Fan Trays, page 113

• Power Supplies, page 114

• Chassis, page 115

configuration to ensure that you are within the power budget.

• Daughtercard power is shown separately.

• Enter the show power command to display current system power usage.

Supervisor Engines

• Supervisor Engine 720, page 8

• Supervisor Engine 32, page 10

• Route Switch Processor 720, page 13

Supervisor Engine 720

• Supervisor Engine 720 Common Features, page 9

• Supervisor Engine 720 with PFC3BXL, page 9

• Supervisor Engine 720 with PFC3B, page 10

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 15S

8

OL-10362-13

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR

Supervisor Engine 720 Common Features

• Integrated 720-Gbps Switch Fabric

• 64-MB bootflash device

• 2 CompactFlash Type II slots (disk0 and disk1)

Note Some Supervisor Engine 720 Release 12.2SR images are larger than the bootflash device

and must be stored on a CompactFlash card.

• Two Ethernet uplink ports:

–

1-MB packet buffer per port

–

Port 1—Gigabit Ethernet SFP

–

Port 2—Configurable as Gigabit Ethernet SFP or 10/100/1000 Mbps RJ-45

• QoS port architecture (Rx/Tx): 1p1q4t/1p2q2t

• Port grouping:

–

Number of ports: 2

–

Number of port groups: 1

–

Port ranges per port group: 1–2

Supported Hardware

• Supervisor Engine 720 requires a high-capacity fan tray (see the “Fan Trays” section on page 113)

Supervisor Engine 720 with PFC3BXL

Product ID

(append “=” for spares)

WS-SUP720-3BXL

Power
Required Product Description

7.82 A@42 V Supervisor Engine 720 with PFC3BXL:

Note There are no memory upgrade options for WS-SUP720-3BXL.

• 1-GB DRAM

• Policy Feature Card 3BXL (PFC3BXL); see the

“RSP720-3C-10GE” section on page 19

• Multilayer Switch Feature Card 3 (MSFC3):

–

1-GB DRAM

–

64-MB bootflash

Minimum
Software Version

12.2(33)SRA

OL-10362-13

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 15S

9

Supported Hardware

Supervisor Engine 720 with PFC3B

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR

Product ID

(append “=” for spares)

WS-SUP720-3B

Power
Required Product Description

7.50 A@42 V Supervisor Engine 720 with PFC3B:

• 512-MB DRAM

• Policy Feature Card 3B (PFC3B); see the

Minimum
Software Version

12.2(33)SRA

“RSP720-3C-10GE” section on page 19

• Multilayer Switch Feature Card 3 (MSFC3):

–

512-MB DRAM

–

64-MB bootflash

Note

• Use WS-F6K-PFC3BXL= to upgrade a WS-SUP720-3B with a PFC3BXL. WS-F6K-PFC3BXL=

includes 1 GB memory upgrades for the Supervisor Engine 720 and the MSFC3. Refer to this
publication for more information:

http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/hardware/Config_Notes/78_16220.ht
ml

• WS-SUP720-3B requires atleast 1-GB DRAM to support software version12.2(33) SRE and later

releases.

• Use MEM-SUP720-SP-1GB= for Switch Processor (SP) memory upgrade and MEM-MSFC3-1GB=

for Route Processor(RP) memory upgrade. For more information, see

http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/hardware/Config_Notes/OL_20611.h
tml

Supervisor Engine 32

Note Supervisor Engine 32 does not support this hardware:

• WS-SUP720-3B

• WS-F6K-PFC3BXL—Policy Feature Card 3BXL (PFC3BXL)

• Distributed Forwarding Cards (DFCs) (installed DFCs do not power up with a Supervisor Engine

• Switch Fabric Modules

• These switching modules:

• 7600-SIP-600—SPA Interface Processor-600

• Optical Services Modules (OSMs)

• CISCO7603—3-slot chassis

32)

–

WS-X6704-10GE—4-port 10-Gigabit Ethernet XENPAK

–

WS-X6748-SFP—48-port Gigabit Ethernet SFP

–

WS-X6724-SFP—24-port Gigabit Ethernet SFP

–

WS-X6816-GBIC—16-port Gigabit Ethernet GBIC

–

WS-X6748-GE-TX—48-port 10/100/1000 RJ-45

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 15S

10

OL-10362-13

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR

• These service modules:

–

WS-SVC-AON-1-K9—Application-Oriented Networking Module

–

WS-SVC-AGM-1-K9—Anomaly Guard Module

–

WS-SVC-ADM-1-K9—Traffic Anomaly Detector Module

–

WS-SVC-MWAM-1—Multi-Processor WAN Application Module

• Supervisor Engine 32 does not support these software features and commands:

–

Protocol independent multicast (PIM) snooping designated-router flooding configurability

–

NetFlow version 9

–

Egress multicast replication

–

Multicast replication mode detection

–

All fabric configuration commands

Supported Hardware

Product ID

(append “=” for spares)

WS-SUP32-10GE-3B

WS-SUP32-GE-3B

Power
Required Product Description

2.39 A@42 V Supervisor Engine 32:

1.89 A@42 V

• One 10/100/1000 Mbps RJ-45 port

• WS-SUP32-10GE—two Gigabit Ethernet ports

(requires XENPAKs)

• WS-SUP32-GE—eight Gigabit Ethernet SFP ports (requires

Gigabit Ethernet SFPs)

• 512-MB DRAM

• 256-MB bootflash

• Policy Feature Card 3B (PFC3B); see the

“RSP720-3C-10GE” section on page 19

• Multilayer Switch Feature Card 2A (MSFC2A):

–

512-MB DRAM

–

64-MB bootflash

Minimum
Software Version

12.2(33)SRA

Software Version SFPs Supported

12.2(33) SRE onwards DWDM-SFP-3033

OL-10362-13

=

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 15S

11

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR

Supported Hardware

Software Version SFPs Supported

DWDM-SFP-3112=

DWDM-SFP-3190=

DWDM-SFP-3268=

DWDM-SFP-3425=

DWDM-SFP-3504=

DWDM-SFP-3582=

DWDM-SFP-3661=

DWDM-SFP-3819=

DWDM-SFP-3898=

DWDM-SFP-3977=

DWDM-SFP-4056=

DWDM-SFP-4214=

DWDM-SFP-4294=

DWDM-SFP-4373=

DWDM-SFP-4453=

DWDM-SFP-4612=

DWDM-SFP-4692=

DWDM-SFP-4772=

DWDM-SFP-4851=

DWDM-SFP-5012=

DWDM-SFP-5092=

DWDM-SFP-5172=

DWDM-SFP-5252=

DWDM-SFP-5413=

DWDM-SFP-5494=

DWDM-SFP-5575=

DWDM-SFP-5655=

DWDM-SFP-5817=

DWDM-SFP-5898=

DWDM-SFP-5979=

DWDM-SFP-6061=

Software Version SFPs Supported

12.2(33) SRE1, 15.0(1)S DWDM-SFP-3346=

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 15S

12

OL-10362-13

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR

Note See this publication for Supervisor Engine 32 hardware information:

http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/hardware/Module_Installation/Su
p_Eng_Guide/supe_gd.html

Route Switch Processor 720

Supported Hardware

DWDM-SFP-3739=

DWDM-SFP-4134=

DWDM-SFP-4532=

DWDM-SFP-4931=

DWDM-SFP-5332=

DWDM-SFP-5736=

DWDM-SFP-6141=

RSP 720 Common Features

• Two Gigabit Ethernet uplink ports: port 1 supports a 1-Gbps small form pluggable (SFP) module; port

• Integrated 720-Gbps switch fabric

• Two CompactFlash Type II slots (on front panel) and 2-GB internal CompactFlash (1 GB each for

• Requires larger power supplies and a high-speed fan tray

• QoS port architecture (Rx/Tx) is 1p1q4t/1p2q2t

2 is configurable with either a 1-Gbps SFP module or a 10/100/1000-Mbps RJ-45

RP and SP)

OL-10362-13

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 15S

13

Supported Hardware

RSP720-3C-GE

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR

Product ID

(append “=” for spares)

RSP720-3C-GE

Power
Required Product Description

6.66 A@42 V Route Switch Processor 720 with PFC3C:

• Two Gigabit Ethernet uplink ports: port 1 supports a 1-Gbps

small form pluggable (SFP) module; port 2 is configurable
with either a 1-Gbps SFP module or a 10/100/1000-Mbps
RJ-45

• Integrated 720-Gbps switch fabric

• PFC3C and MSFC4 with 512-MB bootflash, 4-MB

NVRAM, 4-MB ROMMON, and several DRAM options:

–

Route processor (RP): 1- to 4-GB DRAM (default 1
GB)

–

Switch processor (SP): 1- to 2-GB DRAM (default 1
GB)

• 2 CompactFlash Type II slots (on front panel) and 2-GB

internal CompactFlash (1 GB each for RP and SP)

• Requires larger power supplies and a high-speed fan tray

• QoS port architecture (Rx/Tx) is 1p1q4t/1p2q2t

Minimum
Software Version

12.2(33)SRB

Software Version SFPs Supported

12.2(33) SRE1, 15.0(1)S CWDM-SFP-1470=

CWDM-SFP-1490=

CWDM-SFP-1510=

CWDM-SFP-1530=

CWDM-SFP-1550=

CWDM-SFP-1570=

CWDM-SFP-1590=

CWDM-SFP-1610=

GLC-BX-D

GLC-BX-U

SFP-GE-T

SFP-GE-S

SFP-GE-L

DWDM-SFP-3033

=

DWDM-SFP-3112=

DWDM-SFP-3190=

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 15S

14

OL-10362-13

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR

Software Version SFPs Supported

DWDM-SFP-3268=

DWDM-SFP-3425=

DWDM-SFP-3504=

DWDM-SFP-3582=

DWDM-SFP-3661=

DWDM-SFP-3819=

DWDM-SFP-3898=

DWDM-SFP-3977=

DWDM-SFP-4056=

DWDM-SFP-4214=

DWDM-SFP-4294=

DWDM-SFP-4373=

DWDM-SFP-4453=

DWDM-SFP-4612=

DWDM-SFP-4692=

DWDM-SFP-4772=

DWDM-SFP-4851=

DWDM-SFP-5012=

DWDM-SFP-5092=

DWDM-SFP-5172=

DWDM-SFP-5252=

DWDM-SFP-5413=

DWDM-SFP-5494=

DWDM-SFP-5575=

DWDM-SFP-5655=

DWDM-SFP-5817=

DWDM-SFP-5898=

DWDM-SFP-5979=

DWDM-SFP-6061=

DWDM-SFP-3346=

DWDM-SFP-3739=

DWDM-SFP-4134=

DWDM-SFP-4532=

DWDM-SFP-4931=

DWDM-SFP-5332=

DWDM-SFP-5736=

DWDM-SFP-6141=

Supported Hardware

OL-10362-13

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 15S

15

Supported Hardware

RSP720-3CXL-GE

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR

Note

There are no memory-only upgrade options for RSP720-3C-GE.

•

• The following hardware and features are not supported by the RSP720-3C-GE:

–

CISCO7603 router, OSR-7609 router (supported in SRA but not later releases).

–

Optical Service Modules (OSMs), FlexWAN module (Enhanced FlexWAN module is
supported).

–

In-service software upgrade (ISSU) is not supported in Cisco IOS Release 12.2SRB.

• The RSP720-3C-GE supports the SPA-IPSEC-2G beginning with Cisco IOS Release 12.2(33)SRC.

Product ID

(append “=” for spares)

RSP720-3CXL-GE

Power
Required Product Description

7.33 A@42 V Route Switch Processor 720 with PFC3CXL:

• Two Gigabit Ethernet uplink ports: port 1 supports a 1-Gbps

small form pluggable (SFP) module; port 2 is configurable
with either a 1-Gbps SFP module or a 10/100/1000-Mbps
RJ-45

• Integrated 720-Gbps switch fabric

• PFC3CXL (high-capacity) and MSFC4 with 512-MB

bootflash, 4-MB NVRAM, 4-MB ROMMON, and several
DRAM options:

–

Route processor (RP): 1- to 4-GB DRAM (default 2
GB)

–

Switch processor (SP): 1- to 2-GB DRAM (default 1
GB)

• 2 CompactFlash Type II slots (on front panel) and 2-GB

internal CompactFlash (1 GB each for RP and SP)

• Requires larger power supplies and a high-speed fan tray

• QoS port architecture (Rx/Tx) is 1p1q4t/1p2q2t

Minimum
Software Version

12.2(33)SRB

Software Version SFPs Supported

12.2(33) SRE1, 15.0(1)S CWDM-SFP-1470=

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 15S

16

OL-10362-13

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR

Software Version SFPs Supported

CWDM-SFP-1490=

CWDM-SFP-1510=

CWDM-SFP-1530=

CWDM-SFP-1550=

CWDM-SFP-1570=

CWDM-SFP-1590=

CWDM-SFP-1610=

DWDM-SFP-3033

DWDM-SFP-3112=

DWDM-SFP-3190=

DWDM-SFP-3268=

DWDM-SFP-3425=

DWDM-SFP-3504=

DWDM-SFP-3582=

DWDM-SFP-3661=

DWDM-SFP-3819=

DWDM-SFP-3898=

DWDM-SFP-3977=

DWDM-SFP-4056=

DWDM-SFP-4214=

DWDM-SFP-4294=

DWDM-SFP-4373=

DWDM-SFP-4453=

DWDM-SFP-4612=

DWDM-SFP-4692=

DWDM-SFP-4772=

DWDM-SFP-4851=

DWDM-SFP-5012=

DWDM-SFP-5092=

DWDM-SFP-5172=

DWDM-SFP-5252=

Supported Hardware

=

OL-10362-13

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 15S

17

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR

Supported Hardware

Software Version SFPs Supported

DWDM-SFP-5413

DWDM-SFP-5494=

DWDM-SFP-5575=

DWDM-SFP-5655=

DWDM-SFP-5817=

DWDM-SFP-5898=

DWDM-SFP-5979=

DWDM-SFP-6061=

DWDM-SFP-3346=

DWDM-SFP-3739=

DWDM-SFP-4134=

DWDM-SFP-4532=

DWDM-SFP-4931=

DWDM-SFP-5332=

DWDM-SFP-5736=

DWDM-SFP-6141=

=

Note

There are no memory-only upgrade options for RSP720-3CXL-GE.

•

• The RSP720-3CXL SP has one miniDIMM socket that accepts any vendor's 2GB DIMM. However,

the RSP720-3CXL RP has two miniDIMM sockets. You must use the DIMMs from the same vendor
for these sockets.

• The following hardware and features are not supported by the RSP720-3CXL-GE :

–

Unsupported chassis: CISCO7603, OSR-7609 (supported in SRA but not later releases).

–

Unsupported modules: Optical Service Modules (OSMs), FlexWAN module (Enhanced
FlexWAN module is supported).

–

In-service software upgrade (ISSU) is not supported in Cisco IOS Release 12.2SRB.

• The RSP720-3CXL-GE supports the SPA-IPSEC-2G beginning with Cisco IOS Release

12.2(33)SRC.

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 15S

18

OL-10362-13

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR

RSP720-3C-10GE

Supported Hardware

Product ID

(append “=” for spares)

RSP720-3C-10GE

Power
Required Product Description

7.33 A@42 V Route Switch Processor 720 with uplink ports:

• Two 10 Gigabit Ethernet (10-GE) uplink ports support

10-Gbps X2 modules

• Three Gigabit Ethernet (1-GE) uplink ports: two ports support

1-Gbps small form-factor pluggable (SFP) module; one port
supports 10/100/1000-Mbps RJ-45 connector

• Integrated 720-Gbps switch fabric

• PFC3C and MSFC4 with 512-MB bootflash, 4-MB

NVRAM, 4-MB ROMmon, and several DRAM options:

–

Route processor (RP): 1- to 2-GB DRAM (default 1
GB)

–

Switch processor (SP): 1- to 2-GB DRAM (default 1
GB)

• One CompactFlash Type II slot (on front panel) and one

2-GB internal CompactFlash (1 GB each for RP and SP)

• Requires larger power supplies and a high-speed fan tray

• QoS port architecture, 10-GE ports (Rx/Tx): 8q8t/1p7q8t

(CoS)

• QoS port architecture, 1-GE ports (Rx/Tx): 2q8t/1p3q8t

Minimum
Software Version

12.2(33)SRC

Software Version SFPs Supported

12.2(33) SRE1, 15.0(1)S CWDM-SFP-1470=

OL-10362-13

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 15S

19

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR

Supported Hardware

Software Version SFPs Supported

CWDM-SFP-1490=

CWDM-SFP-1510=

CWDM-SFP-1530=

CWDM-SFP-1550=

CWDM-SFP-1570=

CWDM-SFP-1590=

CWDM-SFP-1610=

DWDM-SFP-3346=

DWDM-SFP-3739=

DWDM-SFP-4134=

DWDM-SFP-4532=

DWDM-SFP-4931=

DWDM-SFP-5332=

DWDM-SFP-5736=

DWDM-SFP-6141=

Note

Cisco IOS Release 12.2(33)SRE adds X2-DWDM and X2-10GB-LRM, X2 10GB-ZR support.

•

• There are no memory-only upgrade options for the RSP720-3C-10GE.

• The RSP720-3C-10GE does not support the following chassis and modules:

–

Unsupported chassis: Cisco 7603 and 7606.

Note Cisco 7613 backplane supports RSP720-3C-10GE and RSP720-3CXL-10GE from

12.2(33)SRE2 onwards.

–

Unsupported modules: Services modules (excluding the Network Analysis Module) , Optical
Service Modules (OSMs), FlexWAN module.

• The RSP720-3C-10GE supports the following 10-Gigabit Ethernet optics: X2-10GB-LR,

X2-10GB-ER, X2-10GB-SR, X2-10GB-CX4, and X2-10GB-LX4.

• The RSP720-3C-10GE supports the following Gigabit Ethernet optics: GLC-SX-MM,

GLC-LH-SM, GLC-ZX-SM, GLC-T, SFP-GE-S, SFP-GE-L, SFP-GE-T, GLC-BX-D, and
GLC-BX-U.

In Cisco IOS Release 12.2(33)SRE, the RSP720-10GE adds support for the following features:

• High-availability features such as NonStop Forwarding with Stateful Switchover (NSF/SSO) and

In-Service Software Upgrade (ISSU) are supported.

• The uplinks on the standby RSP720-10GE are active.

• Broadband Aggregation features are supported.

In Cisco IOS Release 12.2SRC, the RSP720-10GE does not support the following features, which are
supported on the RSP720:

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 15S

20

OL-10362-13

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR

• High-availability features such as NonStop Forwarding with Stateful Switchover (NSF/SSO) and

In-Service Software Upgrade (ISSU) are not supported. Only Route Processor Redundancy (RPR)
mode is supported.

• The uplinks on the standby RSP720-10GE are not active. This restriction exists because the uplink

ports must perform lookups on the active RSP, which is not possible in RPR mode.

• Broadband aggregation features are not supported.

• The RSP720-10GE is on limited orderability. General orderability is expected with the 12.2(33)SRE

release.

RSP720-3CXL-10GE

Supported Hardware

Product ID

(append “=” for spares)

RSP720-3CXL-10GE

Power
Required Product Description

7.33 A@42 V Route Switch Processor 720 with PFC3CXL:

• Two 10 Gigabit Ethernet (10-GE) uplink ports support

10-Gbps X2 modules

• Three Gigabit Ethernet (1-GE) uplink ports: two ports support

1-Gbps small form-factor pluggable (SFP) module; one port
supports 10/100/1000-Mbps RJ-45 connector

• Integrated 720-Gbps switch fabric

• PFC3CXL (high-capacity) and MSFC4 with 512-MB

bootflash, 4-MB NVRAM, 4-MB ROMmon, and several
DRAM options:

–

Route processor (RP): 1- to 2-GB DRAM (default 2
GB)

–

Switch processor (SP): 1- to 2-GB DRAM (default 1
GB)

• One CompactFlash Type II slot (on front panel) and one

2-GB internal CompactFlash (1 GB each for RP and SP)

• Requires larger power supplies and a high-speed fan tray

• QoS port architecture, 10-GE ports (Rx/Tx): 8q8t/1p7q8t

(CoS)

Minimum
Software Version

12.2(33)SRC

Software Version SFPs Supported

12.2(33) SRE1, 15.0(1)S CWDM-SFP-1470=

OL-10362-13

• QoS port architecture, 1-GE ports (Rx/Tx): 2q8t/1p3q8t

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 15S

21

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR

Supported Hardware

Software Version SFPs Supported

CWDM-SFP-1490=

CWDM-SFP-1510=

CWDM-SFP-1530=

CWDM-SFP-1550=

CWDM-SFP-1570=

CWDM-SFP-1590=

CWDM-SFP-1610=

DWDM-SFP-3033

DWDM-SFP-3112=

DWDM-SFP-3190=

DWDM-SFP-3268=

DWDM-SFP-3425=

DWDM-SFP-3504=

DWDM-SFP-3582=

DWDM-SFP-3661=

DWDM-SFP-3819=

DWDM-SFP-3898=

DWDM-SFP-3977=

DWDM-SFP-4056=

DWDM-SFP-4214=

DWDM-SFP-4294=

DWDM-SFP-4373=

DWDM-SFP-4453=

DWDM-SFP-4612=

DWDM-SFP-4692=

DWDM-SFP-4772=

DWDM-SFP-4851=

DWDM-SFP-5012=

DWDM-SFP-5092=

DWDM-SFP-5172=

DWDM-SFP-5252=

DWDM-SFP-5413=

DWDM-SFP-5494=

DWDM-SFP-5575=

DWDM-SFP-5655=

DWDM-SFP-5817=

DWDM-SFP-5898=

=

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 15S

22

OL-10362-13

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR

Software Version SFPs Supported

DWDM-SFP-5979

DWDM-SFP-6061=

DWDM-SFP-3346=

DWDM-SFP-3739=

DWDM-SFP-4134=

DWDM-SFP-4532=

DWDM-SFP-4931=

DWDM-SFP-5332=

DWDM-SFP-5736=

DWDM-SFP-6141=

Note

Cisco IOS Release 12.2(33)SRE adds X2-DWDM and X2-10GB-LRM, X2 10GB-ZR support.

•

• There are no memory-only upgrade options for the RSP720-3CXL-10GE.

• The RSP720-3CXL-10GE does not support the following chassis and modules:

Supported Hardware

=

–

Unsupported chassis: Cisco 7603 and 7606.

Note Cisco 7613 rev 05 backplane support RSP720-3C-10GE and RSP720-3CXL-10GE from

12.2(33)SRE onwards.

–

Unsupported modules: Services modules (excluding the Network Analysis Module) , Optical
Service Modules (OSMs), FlexWAN module.

• The RSP720-3CXL-10GE supports the following 10-Gigabit Ethernet optics: X2-10GB-LR,

X2-10GB-ER, X2-10GB-SR, X2-10GB-CX4, and X2-10GB-LX4.

• The RSP720-3CXL-10GE supports the following Gigabit Ethernet optics: GLC-SX-MM,

GLC-LH-SM, GLC-ZX-SM, GLC-T, SFP-GE-S, SFP-GE-L, SSFP-GE-T, GLC-BX-D, and
GLC-BX-U.

In Cisco IOS Release 12.2(33)SRE, the RSP720-10GE adds support for the following features:

• High-availability features such as NonStop Forwarding with Stateful Switchover (NSF/SSO) and

In-Service Software Upgrade (ISSU) are not supported.

• The uplinks on the standby RSP720-10GE are active.

• Broadband Aggregation features are supported.

In Cisco IOS Release 12.2SRC, the RSP720-3CXL-10GE does not support the following features, which
are supported on the RSP720:

• High-availability features such as NonStop Forwarding with Stateful Switchover (NSF/SSO) and

In-Service Software Upgrade (ISSU) are not supported. Only Route Processor Redundancy (RPR)
mode is supported.

• The uplinks on the standby RSP720-10GE are not active. This restriction exists because the uplink

ports must perform lookups on the active RSP, which is not possible in RPR mode.

• Broadband aggregation features are not supported.

OL-10362-13

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 15S

23

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR

Supported Hardware

• The RSP720-1GE is on limited orderability. General orderability is expected with the 12.2(33)SRE

release.

Policy Feature Cards

• Policy Feature Card Guidelines and Restrictions, page 24

• Policy Feature Card 3BXL, page 25

• Policy Feature Card 3B, page 25

• Distributed and Centralized Forwarding Cards, page 26

Policy Feature Card Guidelines and Restrictions

• The PFC3 supports a theoretical maximum of 64,000 MAC addresses (32,000 MAC addresses

recommended maximum).

• You cannot use one type of PFC3 (PFC3BXL or PFC3B) on one supervisor engine and a different

type on the other supervisor engine for redundancy. You must use identical policy feature cards for
redundancy.

• Enter the show platform hardware pfc mode command to display the PFC3 mode.

• Enter the show platform earl-mode command to display the PFC3 mode.

• PFC3B—These restrictions apply to a configuration with a PFC3B and these DFCs:

–

PFC3B and DFC3B—No restrictions.

–

PFC3B and DFC3BXL—The PFC3B restricts DFC3BXL functionality: after a reload with a
DFC3BXL-equipped module installed, the DFC3BXL functions as a DFC3B.

• PFC3BXL—These restrictions apply to a configuration with a PFC3BXL and these DFCs:

–

PFC3BXL and DFC3B—PFC3BXL functionality is restricted by the DFC3B: after a reload
with a DFC3B-equipped module installed (whether powered up or down), the PFC3BXL
functions as a PFC3B.

–

PFC3BXL and DFC3BXL—No restrictions.

• The features that require the PFC3BXL or PFC3B are not supported in PFC3A mode (see the

Release Notes for Cisco IOS Release 12.2SR on the Cisco 7600 Series Routers).

• To use DFC3B-equipped switching modules with a PFC3BXL, the DFC3B-equipped switching

modules must be installed at bootup.

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 15S

24

OL-10362-13

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR

Policy Feature Card 3BXL

Supported Hardware

Product ID

(append “=” for spares)

WS-F6K-PFC3BXL

Power
Required Product Description

2.57 A@42 V Policy Feature Card 3BXL (PFC3BXL)

Minimum
Software Version

Supported only with Supervisor Engine 720 12.2(33)SRA

Note

• There are no memory upgrade options for WS-F6K-PFC3BXL.

• Use WS-F6K-PFC3BXL= to upgrade a WS-SUP720 or WS-SUP720-3B with a PFC3BXL. WS-F6K-PFC3BXL=

includes 1 GB memory upgrades for the Supervisor Engine 720 and the MSFC3. Refer to this publication for more
information:

http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/hardware/Config_Notes/78_16220.html

Policy Feature Card 3B

Product ID

(append “=” for spares)

WS-F6K-PFC3B

Note

Power
Required Product Description

2.25 A@42 V Policy Feature Card 3B (PFC3B)

With Supervisor Engine 720 12.2(33)SRA

With Supervisor Engine 32 12.2(33)SRA

Minimum
Software Version

There are no memory upgrade options for WS-F6K-PFC3B.

•

• Use WS-F6K-PFC3BXL= to upgrade a WS-SUP720-3B with a PFC3BXL. WS-F6K-PFC3BXL= includes 1 GB memory

upgrades for the Supervisor Engine 720 and the MSFC3. Refer to this publication for more information:

http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/hardware/Config_Notes/78_16220.html

Policy Feature Card 3C

Product ID

(append “=” for spares)

WS-F6K-PFC3C

Note

• There are no memory upgrade options for WS-F6K-PFC3C.

Power
Required Product Description

2.25 A@42 V Policy Feature Card 3C (PFC3C)

Supported only with RSP 720 12.2(33)SRB

Minimum
Software Version

OL-10362-13

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 15S

25

Supported Hardware

Policy Feature Card 3CXL

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR

Product ID

(append “=” for spares)

WS-F6K-PFC3CXL

Power
Required Product Description

2.57 A@42 V Policy Feature Card 3CXL (PFC3CXL)

Supported only with RSP 720 12.2(33)SRB

Note

• There are no memory upgrade options for WS-F6K-PFC3BXL.

Distributed and Centralized Forwarding Cards

• Centralized Forwarding Card (WS-X6700-CFC), page 26

• Distributed Forwarding Card 3BXL, page 27

• Distributed Forwarding Card 3B, page 28

• Distributed Forwarding Card 3CXL, page 29

• Distributed Forwarding Card 3C, page 29

Note See the “Route Switch Processor 720” section on page 13 for Policy Feature Cards (PFC) and

Distributed Forwarding Card (DFC) restrictions.

Minimum
Software Version

Centralized Forwarding Card (WS-X6700-CFC)

Product ID

(append “=” for spares)

WS-X6700-CFC

Note There are no memory upgrade options for WS-X6700-CFC.

Power
Required Product Description

0.75 A@42 V Centralized Forwarding Card (CFC) for use on CEF720 modules

Supported only with Supervisor Engine 720 12.2(33)SRA

Minimum
Software Version

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 15S

26

OL-10362-13

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR

Distributed Forwarding Card 3BXL

• WS-F6700-DFC3BXL, page 27

• WS-F6K-DFC3BXL, page 27

WS-F6700-DFC3BXL

Supported Hardware

Product ID

(append “=” for spares)

WS-F6700-DFC3BXL

Power
Required Product Description

Minimum
Software Version

3.30 A@42 V Distributed Forwarding Card 3BXL (DFC3BXL) for use on CEF720 modules

Supported only with Supervisor Engine 720 12.2(33)SRA

Note

• WS-F6700-DFC3BXL uses memory that is installed on the switching module.

• Refer to this publication for information about WS-F6700-DFC3BXL upgrades:

http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/hardware/Config_Notes/78_15893.html

WS-F6K-DFC3BXL

Product ID

(append “=” for spares)

WS-F6K-DFC3BXL

Power
Required Product Description

Minimum
Software Version

1.47 A@42 V Distributed Forwarding Card 3BXL (DFC3BXL) for use on dCEF256 and CEF256
modules

Supported only with Supervisor Engine 720 12.2(33)SRA

Note

• Refer to this publication for information about WS-F6K-DFC3BXL memory upgrades:

http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/hardware/Config_Notes/78_12409.html

• Supervisor Engine 720 supports a WS-F6K-DFC3BXL on these WS-X6516-GBIC switching module hardware revisions:

–

Lower than 5.0

–

5.5 and higher

• Supervisor Engine 720 does not support a DFC3 on WS-X6516-GBIC switching module hardware revisions 5.0 through

5.4. With a Supervisor Engine 720 and with a DFC3 installed, WS-X6516-GBIC switching module hardware revisions

5.0 through 5.4 do not power up.

• With a Supervisor Engine 720 but without a DFC3, WS-X6516-GBIC switching module hardware revisions 5.0 through

5.4 operate in bus mode.

• Refer to external field notice 24494 for more information about Supervisor Engine 720 and a DFC3 on WS-X6516-GBIC

switching modules:

http://www.cisco.com/warp/public/770/fn24494.shtml

OL-10362-13

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 15S

27

Supported Hardware

Distributed Forwarding Card 3B

• WS-F6700-DFC3B, page 28

• WS-F6K-DFC3B, page 28

WS-F6700-DFC3B

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR

Product ID

(append “=” for spares)

WS-F6700-DFC3B

Power
Required Product Description

Minimum
Software Version

3.00 A@42 V Distributed Forwarding Card 3B (DFC3B) for use on CEF720 modules

Supported only with Supervisor Engine 720 12.2(33)SRA

Note

• WS-F6700-DFC3B uses memory that is installed on the switching module.

• Refer to this publication for information about WS-F6700-DFC3B upgrades:

http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/hardware/Config_Notes/78_15893.html

WS-F6K-DFC3B

Product ID

(append “=” for spares)

WS-F6K-DFC3B

Power
Required Product Description

Minimum
Software Version

1.67 A@42 V Distributed Forwarding Card 3B (DFC3B) for use on dCEF256 and CEF256
modules

Supported only with Supervisor Engine 720 12.2(33)SRA

Note

• Refer to this publication for information about WS-F6K-DFC3B memory upgrades:

http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/hardware/Config_Notes/78_12409.html

• Supervisor Engine 720 supports a WS-F6K-DFC3B on these WS-X6516-GBIC switching module hardware revisions:

–

Lower than 5.0

–

5.5 and higher

• Supervisor Engine 720 does not support a DFC3 on WS-X6516-GBIC switching module hardware revisions 5.0 through

5.4. With a Supervisor Engine 720 and with a DFC3 installed, WS-X6516-GBIC switching module hardware revisions

5.0 through 5.4 do not power up.

• With a Supervisor Engine 720 but without a DFC3, WS-X6516-GBIC switching module hardware revisions 5.0 through

5.4 operate in bus mode.

• Refer to external field notice 24494 for more information about Supervisor Engine 720 and a DFC3 on WS-X6516-GBIC

switching modules:

http://www.cisco.com/en/US/ts/fn/200/fn24494.html

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 15S

28

OL-10362-13

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR

Distributed Forwarding Card 3CXL

Supported Hardware

Product ID

(append “=” for spares)

WS-F6700-DFC3CXL

Power
Required Product Description

2.35 A@42 V Distributed Forwarding Card 3CXL (DFC3CXL) for use on CEF720 modules

Supported with Supervisor Engine 720 and Route
Switch Processor 720

Distributed Forwarding Card 3C

Product ID

(append “=” for spares)

WS-F6700-DFC3C

Power
Required Product Description

1.65 A@42 V Distributed Forwarding Card 3C (DFC3C) for use on CEF720 modules

Supported with Supervisor Engine 720 and Route
Switch Processor 720

10-Gigabit Ethernet Switching Modules

Product ID

(append “=” for spares)

WS-X6704-10GE

Power
Required Product Description

6.28 A@42 V 4-port 10-Gigabit Ethernet XENPAK

Minimum
Software Version

12.2(33)SRB

Minimum
Software Version

12.2(33)SRB

Minimum
Software Version

• CEF720 with WS-X6700-CFC (adds 0.75 A@42 V)

• dCEF720 with WS-F6700-DFC3BXL (adds 3.30 A@42 V)

• dCEF720 with WS-F6700-DFC3B (adds 3.00 A@42 V)

• Supports egress multicast replication

• QoS port architecture (Rx/Tx):

–

With DFC3: 8q8t/1p7q8t

–

With CFC: 1q8t/1p7q8t

• Number of ports: 4

Number of port groups: 4
Port ranges per port group: 1 port in each group

Supported with Supervisor Engine 720. 12.2(33)SRA

Supported with RSP 720-1GE 12.2(33)SRB

Supported with RSP720-10GE 12.2(33)SRC

OL-10362-13

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 15S

29

Supported Hardware

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR

Product ID

(append “=” for spares)

Note

Note

•

WS-X6704-10GE requires one of the following:

–

WS-F6700-DFC3BXL (3.30A@42V)

–

WS-F6700-DFC3B (3.00 A@42 V)

–

WS-X6700-CFC (0.75 A@42 V)

• WS-X6704-10GE ships with WS-X6700-CFC installed unless ordered with WS-F6700-DFC3BXL or

Power
Required Product Description

Minimum
Software Version

WS-F6700-DFC3B.

• WS-X6704-10GE is supported in theWS-C6503-E chassis.

• WS-X6704-10GE is not supported in the WS-C6503 and CISCO7603 chassis.

• In a 13-slot chassis, WS-X6704-10GE is supported only in slots 9 through 13 and does not power up in other slots.

• On WS-X6704-10GE ports, Spanning Tree Protocol (STP) bridge protocol data units (BPDUs) are not exempt from Traffic

Storm Control suppression. Do not configure Traffic Storm Control on STP-protected WS-X6704-10GE ports that

interconnect network devices.

WS-X6502-10GE

3.30 A@42 V 1-port 10-Gigabit Ethernet

• With Supervisor Engine 720:

–

dCEF256 with WS-F6K-DFC3BXL (adds 1.47 A@42 V)

–

dCEF256 with WS-F6K-DFC3B (adds 1.67 A@42 V)

• QoS port architecture (Rx/Tx): 1p1q8t/1p2q1t

• Number of ports: 1

Number of port groups: 1
Port ranges per port group: 1 port in 1 group

With Supervisor Engine 720 12.2(33)SRA

With Supervisor Engine 32 12.2(33)SRA

Note WS-X6502-10GE does not support Inter-Switch Link (ISL) encapsulation.

Optical Interface Module (OIM) for WS-X6502-10GE

WS-G6488

WS-G6483

10GBASE-LR serial 1310 nm long-reach OIM 12.2(33)SRA

10GBASE-ER serial 1550 nm extended-reach OIM 12.2(33)SRA

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 15S

30

OL-10362-13

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR

Supported Hardware

Product ID

(append “=” for spares)

WS-X6708-10G-3C

(WS-X6708-10GE with

WS-F6700-DFC3C)

WS-X6708-10G-3CXL
(WS-X6708-10GE with
WS-F6700-DFC3CXL)

11.28A @ 42V

Power
Required Product Description

10.58A @42 V 8-port 10-Gigabit Ethernet X2 module

• dCEF720

• Supports egress multicast replication

• QoS port architecture (Rx/Tx): 8q4t/1p7q4t

• Dual switch-fabric connections

Fabric Channel #1: Ports 2, 3, 6, 8
Fabric Channel #2: Ports 1, 4, 5, 7

• Number of ports: 8

Number of port groups: 8
Port ranges per port group: 1 port in each group

Supported only with Supervisor Engine 720, Route Switch
Processor 720, and RSP720-10GE.

X2 Modules Supported in

Gigabit Ethernet SPAs

X2-10GB-SR 12.2(33)SRC

X2-10GB-CX4 12.2(33)SRC

X2-10GB-LX4 12.2(33)SRC

X2-10GB-ER 12.2(33)SRC

X2-10GB-LR 12.2(33)SRC

X2-10GB-LRM 12.2(33)SRE

X2 10GB-ZR 12.2(33)SRE

Minimum
Software Version

12.2(33)SRC

OL-10362-13

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 15S

31

Supported Hardware

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR

Product ID

(append “=” for spares)

Power
Required Product Description

Minimum
Software Version

X2-DWDMs 12.2(33)SRE

Note

•

To configure WS-X6708-10GE port oversubscription, refer to the hw-module oversubscription command in the
command reference at this URL:

http://www.cisco.com/en/US/products/ps6922/prod_command_reference_list.html

• Installation of a WS-X6708-10GE switching module in a chassis other than the following prevents operation at levels

that are fully NEBS-compliant:

–

WS-C6503-E

–

WS-C6504-E

–

WS-C6506-E

–

WS-C6509-E

–

WS-C6509-NEB-A with dual fan tray

–

CISCO7604

–

CISCO7609 with dual fan tray

• WS-X6708-10G-3C and WS-X6708-10G-3CXL are the orderable product IDs.

• The front panel is labeled WS-X6708-10GE.

• Cisco IOS software commands display WS-X6708-10GE with either WS-F6700-DFC3C or WS-F6700-DFC3CXL.

• WS-X6708-10GE ports do not supportVACL capture. (CSCsb59015)

• WS-X6708-10GE is not supported in the WS-C6503 and CISCO 7603 chassis.

• In a 13-slot chassis, WS-X6708-10GE is supported only in slots 9 through 13 and does not power up in other slots.

• On WS-X6708-10GE ports, STP BPDUs are not exempt from Traffic Storm Control suppression. Do not configure Traffic

Storm Control on STP-protected WS-X6708-10GE ports that interconnect network devices.

XENPAKs

Product ID
(append “=” for spares) Product Description

DWDM-XENPAK

WDM-XENPAK-REC

XENPAK-10GB-CX4

XENPAK-10GB-SR

XENPAK-10GB-LX4

XENPAK-10GB-ER

10GBASE dense wavelength division multiplexing (DWDM) 100-GHz ITU grid 12.2(33)SRA

10GBASE receive-only wavelength division multiplexing (WDM) 12.2(33)SRA

10GBASE for CX4 cable 12.2(33)SRA

10GBASE-SR Serial 850-nm short-reach multimode fiber (MMF) 12.2(33)SRA

10GBASE-LX4 Serial 1310-nm multimode fiber (MMF) 12.2(33)SRA

10GBASE-ER Serial 1550-nm extended-reach, single-mode fiber (SMF),
dispersion-shifted fiber (DSF)

Minimum
Software Version

12.2(33)SRA

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 15S

32

OL-10362-13

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR

Supported Hardware

Product ID
(append “=” for spares) Product Description

Note XENPAK-10GB-ER units is not supported with Part Number 800-24557-01, as described in this external field notice

Minimum
Software Version

(CSCee47030):

http://www.cisco.com/warp/public/770/fn29736.shtml

XENPAK-10GB-LR

10GBASE-LR Serial 1310-nm long-reach, single-mode fiber (SMF),

12.2(33)SRA

dispersion-shifted fiber (DSF)

X2 Modules

Product ID
(append “=” for spares) Product Description

X2-10GB-SR

X2-10GB-CX4

X2-10GB-LX4

X2-10GB-LR

10GBASE-SR Serial 850-nm short-reach multimode (MMF) 12.2(33)SRC

10GBASE for CX4 (copper) cable 12.2(33)SRC

10GBASE-LX4 Serial 1310-nm multimode (MMF) 12.2(33)SRC

10GBASE-LR Serial 1310-nm long-reach, single-mode fiber (SMF),
dispersion-shifted fiber (DSF)

X2-10GB-ER

10GBASE-ER Serial 1550-nm extended-reach, single-mode fiber (SMF),
dispersion-shifted fiber (DSF)

Minimum
Software Version

12.2(33)SRC

12.2(33)SRC

OL-10362-13

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 15S

33

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR

Supported Hardware

Gigabit Ethernet Switching Modules

Product ID

(append “=” for spares)

WS-X6748-SFP

Power
Required Product Description

5.32 A@42 V 48-port Gigabit Ethernet SFP

• CEF720 with WS-X6700-CFC (adds 0.75 A@42 V)

• dCEF720 with WS-F6700-DFC3BXL (adds 3.30 A@42 V)

• dCEF720 with WS-F6700-DFC3B (adds 3.00 A@42 V)

• Supports egress multicast replication

• QoS architecture:

–

With DFC3: 2q8t/1p3q8t

–

With CFC: 1q8t/1p3q8t

• Number of ports: 48

Number of port groups: 4
Port ranges per port group:

1, 3, 5, 7, 9, 11, 13, 15, 17, 19, 21, 23

2, 4, 6, 8, 10, 12, 14, 16, 18, 20, 22, 24
25, 27, 29, 31, 33, 35, 37, 39, 41, 43, 45, 47
26, 28, 30, 32, 34, 36, 38, 40, 42, 44, 46, 48

Supported only with Supervisor Engine 720 and RSP

720.

Supported with RSP 720-1GE 12.2(33)SRB

Supported with RSP 720-10GE 12.2(33)SRC

SFPs Supported

GLC-T= 12.2(33)SRA

GLC-SX-MM= 12.2(33)SRA

GLC-LH-SM= 12.2(33)SRA

GLC-ZX-SM= 12.2(33)SRA

GLC-BX-D= 12.2(33)SRA

GLC-BX-U= 12.2(33)SRA

CWDM-SFP-xxxx= 12.2(33)SRA

SFP-GE-S 12.2(33)SRB

SFP-GE-L 12.2(33)SRB

SFP-GE-Z 12.2(33)SRB

Minimum
Software Version

12.2(33)SRA

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 15S

34

OL-10362-13

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR

Supported Hardware

Product ID

(append “=” for spares)

Power
Required Product Description

SFP-GE-T 12.2(33)SRD2

DWDM-SFP-3033

DWDM-SFP-3112

DWDM-SFP-3190

DWDM-SFP-3268

DWDM-SFP-3425

DWDM-SFP-3504

DWDM-SFP-3582

DWDM-SFP-3661

DWDM-SFP-3819

DWDM-SFP-3898

DWDM-SFP-3977

DWDM-SFP-4056

DWDM-SFP-4214

DWDM-SFP-4294

DWDM-SFP-4373

DWDM-SFP-4453

DWDM-SFP-4612

DWDM-SFP-4692

DWDM-SFP-4772

DWDM-SFP-4851

DWDM-SFP-5012

DWDM-SFP-5092

DWDM-SFP-5172

DWDM-SFP-5252

DWDM-SFP-5413

DWDM-SFP-5494

DWDM-SFP-5575

DWDM-SFP-5655

DWDM-SFP-5817

DWDM-SFP-5898

DWDM-SFP-5979

DWDM-SFP-6061

DWDM-SFP-3346= 12.2(33)SRE1

DWDM-SFP-3739= 12.2(33)SRE1

DWDM-SFP-4134= 12.2(33)SRE1

DWDM-SFP-4532= 12.2(33)SRE1

Minimum
Software Version

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

OL-10362-13

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 15S

35

Supported Hardware

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR

Product ID

(append “=” for spares)

Power
Required Product Description

Minimum
Software Version

DWDM-SFP-4931= 12.2(33)SRE1

DWDM-SFP-5332= 12.2(33)SRE1

DWDM-SFP-5736= 12.2(33)SRE1

DWDM-SFP-6141= 12.2(33)SRE1

Note

• WS-X6748-SFP requires one of the following:

–

WS-F6700-DFC3BXL (3.30A@42V)

–

WS-F6700-DFC3B (3.00 A@42 V)

–

WS-X6700-CFC (0.75 A@42 V)

• WS-X6748-SFP ships with WS-X6700-CFC installed unless ordered with WS-F6700-DFC3BXL or WS-F6700-DFC3B.

• WS-X6748-SFP is supported in the WS-C6503-E chassis.

• WS-X6748-SFP is not supported in the WS-C6503 and CISCO7603 chassis.

• In a 13-slot chassis, WS-X6748-SFP is supported only in slots 9 through 13 and does not power up in other slots.

• On WS-X6748-SFP ports, STP BPDUs are not exempt from Traffic Storm Control suppression. Do not configure Traffic

Storm Control on STP-protected WS-X6748-SFP ports that interconnect network devices.

• See the “Small Form-Factor Pluggable Modules (SFPs)” section on page 42.

WS-X6724-SFP

2.23 A@42 V 24-port Gigabit Ethernet SFP

• CEF720 with WS-X6700-CFC (adds 0.75 A@42 V)

• dCEF720 with WS-F6700-DFC3BXL (adds 3.30 A@42 V)

• dCEF720 with WS-F6700-DFC3B (adds 3.00 A@42 V)

• Supports egress multicast replication

• QoS architecture:

–

With DFC3: 2q8t/1p3q8t

–

With CFC: 1q8t/1p3q8t

• Number of ports: 24

Number of port groups: 2
Port ranges per port group: 1–12, 13–24

Supported only with Supervisor Engine 720. 12.2(33)SRA

Supported with RSP720-1GE 12.2(33)SRB

Supported with RSP720-10GE 12.2(33)SRC

SFPs Supported

GLC-T= 12.2(33)SRA

GLC-SX-MM= 12.2(33)SRA

GLC-LH-SM= 12.2(33)SRA

GLC-ZX-SM= 12.2(33)SRA

GLC-BX-D= 12.2(33)SRA

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 15S

36

OL-10362-13

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR

Supported Hardware

Product ID

(append “=” for spares)

Power
Required Product Description

GLC-BX-U= 12.2(33)SRA

CWDM-SFP-xxxx= 12.2(33)SRA

SFP-GE-S 12.2(33)SRB

SFP-GE-L 12.2(33)SRB

SFP-GE-Z 12.2(33)SRB

Minimum
Software Version

OL-10362-13

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 15S

37

Supported Hardware

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR

Product ID

(append “=” for spares)

Power
Required Product Description

SFP-GE-T 12.2(33)SRB

DWDM-SFP-3033

DWDM-SFP-3112

DWDM-SFP-3190

DWDM-SFP-3268

DWDM-SFP-3425

DWDM-SFP-3504

DWDM-SFP-3582

DWDM-SFP-3661

DWDM-SFP-3819

DWDM-SFP-3898

DWDM-SFP-3977

DWDM-SFP-4056

DWDM-SFP-4214

DWDM-SFP-4294

DWDM-SFP-4373

DWDM-SFP-4453

DWDM-SFP-4612

DWDM-SFP-4692

DWDM-SFP-4772

DWDM-SFP-4851

DWDM-SFP-5012

DWDM-SFP-5092

DWDM-SFP-5172

DWDM-SFP-5252

DWDM-SFP-5413

DWDM-SFP-5494

DWDM-SFP-5575

DWDM-SFP-5655

DWDM-SFP-5817

DWDM-SFP-5898

DWDM-SFP-5979

DWDM-SFP-6061

DWDM-SFP-3346= 12.2(33)SRE1

DWDM-SFP-3739= 12.2(33)SRE1

DWDM-SFP-4134= 12.2(33)SRE1

DWDM-SFP-4532= 12.2(33)SRE1

Minimum
Software Version

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 15S

38

OL-10362-13

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR

Supported Hardware

Product ID

(append “=” for spares)

Power
Required Product Description

Minimum
Software Version

DWDM-SFP-4931= 12.2(33)SRE1

DWDM-SFP-5332= 12.2(33)SRE1

DWDM-SFP-5736= 12.2(33)SRE1

DWDM-SFP-6141= 12.2(33)SRE1

Note

• WS-X6724-SFP requires one of the following:

–

WS-F6700-DFC3BXL (3.30 A@42 V)

–

WS-F6700-DFC3B (3.00 A@42 V)

–

WS-X6700-CFC (0.75 A@42 V)

• WS-X6724-SFP ships with WS-X6700-CFC installed unless ordered with WS-F6700-DFC3BXL or WS-F6700-DFC3B.

• WS-X6724-SFP is supported in the WS-C6503-E chassis.

• WS-X6724-SFP is not supported in the WS-C6503 and CISCO7603 chassis.

• On WS-X6724-SFP ports, STP BPDUs are not exempt from Traffic Storm Control suppression. Do not configure Traffic

Storm Control on STP-protected WS-X6724-SFP ports that interconnect network devices.

• See the “Small Form-Factor Pluggable Modules (SFPs)” section on page 42.

WS-X6816-GBIC

3.84 A@42 V 16-port Gigabit Ethernet GBIC

• dCEF256

• QoS port architecture (Rx/Tx): 1p1q4t/1p2q2t

Number of ports: 16
Number of port groups: 2
Port ranges per port group: 1–8, 9–16

With Supervisor Engine 720 12.2(33)SRA

Note

WS-X6816-GBIC requires one of these for use with Supervisor Engine 720:

•

–

WS-F6K-DFC3BXL (adds 1.47 A@42 V)

–

WS-F6K-DFC3B (adds 1.67 A@42 V)

• In a 13-slot chassis, WS-X6816-GBIC is supported only in slots 9 through 13 and does not power up in other slots.

OL-10362-13

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 15S

39

Supported Hardware

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR

Product ID

(append “=” for spares)

WS-X6516A-GBIC

WS-X6516-GBIC

Power
Required Product Description

3.62 A@42 V 16-port Gigabit Ethernet GBIC

• CEF256

• With Supervisor Engine 720:

–

dCEF256 with WS-F6K-DFC3BXL (adds 1.47 A@42 V)

–

dCEF256 with WS-F6K-DFC3B (adds 1.67 A@42 V)

• 1-MB per-port packet buffers

• Supports egress multicast replication

• QoS port architecture (Rx/Tx): 1p1q4t/1p2q2t

• Number of ports: 16

Number of port groups: 2
Port ranges per port group: 1–8, 9–16

With Supervisor Engine 720 12.2(33)SRA

With Supervisor Engine 32 12.2(33)SRA

With RSP 720-1GE 12.2(33)SRB

With RSP 720-10GE 12.2(33)SRC

3.40 A@42 V 16-port Gigabit Ethernet GBIC

• CEF256

• With Supervisor Engine 720:

–

dCEF256 with WS-F6K-DFC3BXL (adds 1.47 A@42 V)

Minimum
Software Version

–

dCEF256 with WS-F6K-DFC3B (adds 1.67 A@42 V)

• 512-KB per-port packet buffers

• QoS port architecture (Rx/Tx): 1p1q4t/1p2q2t

• Number of ports: 16

Number of port groups: 2
Port ranges per port group: 1–8, 9–16

With Supervisor Engine 720 12.2(33)SRA

With Supervisor Engine 32 12.2(33)SRA

With RSP 720-1GE 12.2(33)SRB

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 15S

40

OL-10362-13

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR

Supported Hardware

Product ID

(append “=” for spares)

Power
Required Product Description

Minimum
Software Version

With RSP 720-10GE 12.2(33)SRC

Note

•

Supervisor Engine 720 supports a DFC3 on these WS-X6516-GBIC hardware revisions:

–

Lower than 5.0

–

5.5 and higher

• Supervisor Engine 720 does not support a DFC3 on WS-X6516-GBIC hardware revisions 5.0 through 5.4. With a

Supervisor Engine 720 and with a DFC3 installed, WS-X6516-GBIC hardware revisions 5.0 through 5.4 do not power up.

• With a Supervisor Engine 720 but without a DFC3, WS-X6516-GBIC hardware revisions 5.0 through 5.4 operate in bus

mode.

• Refer to external field notice 24494 for more information:

http://www.cisco.com/warp/public/770/fn24494.shtml

WS-X6416-GBIC

2.81 A@42 V 16-port Gigabit Ethernet GBIC

• QoS port architecture (Rx/Tx): 1p1q4t/1p2q2t

• Number of ports: 16

Number of port groups: 2
Port ranges per port group: 1–8, 9–16

With Supervisor Engine 720 12.2(33)SRA

With Supervisor Engine 32 12.2(33)SRA

WS-X6416-GE-MT

2.50 A@42 V 16-Port Gigabit Ethernet MT-RJ

• QoS port architecture (Rx/Tx): 1p1q4t/1p2q2t

• Number of ports: 16

Number of port groups: 2
Port ranges per port group: 1–8, 9–16

With Supervisor Engine 720 12.2(33)SRA

With Supervisor Engine 32 12.2(33)SRA

WS-X6316-GE-TX

5.15 A@42 V 16-port Gigabit Ethernet RJ-45

• QoS port architecture (Rx/Tx): 1p1q4t/1p2q2t

• Number of ports: 16

Number of port groups: 2
Port ranges per port group: 1–8, 9–16

With Supervisor Engine 720 12.2(33)SRA

With Supervisor Engine 32 12.2(33)SRA

Note Supervisor Engine 32 does not support WS-X6316-GE-TX.

OL-10362-13

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 15S

41

Supported Hardware

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR

Product ID

(append “=” for spares)

WS-X6408A-GBIC

Power
Required Product Description

2.00 A@42 V 8-port Gigabit Ethernet GBIC

• QoS port architecture (Rx/Tx): 1p1q4t/1p2q2t

• Number of ports: 8

Number of port groups: 1
Port ranges per port group: 1–8

With Supervisor Engine 720 12.2(33)SRA

With Supervisor Engine 32 12.2(33)SRA

WS-X6408-GBIC

2.00 A@42 V 8-port Gigabit Ethernet GBIC

• QoS port architecture (Rx/Tx): 1q4t/2q2t

• Number of ports: 8

Number of port groups: 1
Port ranges per port group: 1–8

With Supervisor Engine 720 12.2(33)SRA

With Supervisor Engine 32 12.2(33)SRA

Small Form-Factor Pluggable Modules (SFPs)

Minimum
Software Version

These sections describe SFPs:

• Gigabit Ethernet SFPs, page 42

• Fast Ethernet SFPs, page 43

Gigabit Ethernet SFPs

See the Unsupported Hardware, page 118 section for information about unsupported DWDM-SFPs.

Note Because there are no configurable PIDs, all CWDM and DWDM optics must be ordered as spares.

Product ID
(append “=” for spares) Product Description

GLC-ZX-SM

CWDM-SFP

GLC-T

GLC-LH-SM

GLC-SX-MM

SFP-GE-S

SFP-GE-L

SFP-GE-Z

SFP-GE-T

1000BASE-ZX SFP 12.2(33)SRA

1000BASE-CWDM SFP 12.2(33)SRA

1000BASE-T SFP 12.2(33)SRA

1000BASE-LX/LH SFP 12.2(33)SRA

1000BASE-SX SFP 12.2(33)SRA

1000BASE-SX SFP 12.2(33)SRA

1000BASE-LX/LH SFP 12.2(33)SRA

1000BASE-ZX SFP 12.2(33)SRA

1000BASE-T SFP 12.2(33)SRB3

Minimum
Software Version

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 15S

42

OL-10362-13

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR

Supported Hardware

Product ID
(append “=” for spares) Product Description

CWDM-SFP-1470

CWDM-SFP-1490

CWDM-SFP-1510

CWDM-SFP-1530

CWDM-SFP-1550

CWDM-SFP-1570

CWDM-SFP-1590

CWDM-SFP-1610

1000BASE-CWDM SFP 1470 nm 12.2(33)SRB3

1000BASE-CWDM SFP 1490 nm 12.2(33)SRB3

1000BASE-CWDM SFP 1510 nm 12.2(33)SRB3

1000BASE-CWDM SFP 1530 nm 12.2(33)SRB3

1000BASE-CWDM SFP 1550 nm 12.2(33)SRB3

1000BASE-CWDM SFP 1570 nm 12.2(33)SRB3

1000BASE-CWDM SFP 1590 nm 12.2(33)SRB3

1000BASE-CWDM SFP 1610 nm 12.2(33)SRB3

Fast Ethernet SFPs

Note Only WS-X6148-FE-SFP supports these Fast Ethernet SFPs.

Product ID
(append “=” for spares) Product Description

GLC-FE-100FX

GLC-FE-100LX

100BASEFX SFP 12.2(33)SRA

100BASELX SFP 12.2(33)SRA

Minimum
Software Version

Minimum
Software Version

10-Gigabit Ethernet Transceiver Modules

Product ID
(append “=” for spares) Product Description

XFP-10GLR-OC192SR

Cisco multirate XFP transceiver module for 10GBASE-LR Ethernet and
OC-192/STM-64 short-reach (SR-1) Packet-over-SONET/SDH (POS)
applications, SMF, dual LC connector

XFP-10GER-OC192IR

Cisco multirate XFP transceiver module for 10GBASE-ER Ethernet and
OC-192/STM-64 intermediate-reach (IR-2) Packet-over-SONET/SDH (POS)
applications, SMF, dual LC connector

XFP-10GZR-OC192LR

Cisco multirate XFP transceiver module for 10GBASE-LR Ethernet and
OC-192/STM-64 long-reach Packet-over-SONET/SDH (POS) applications,
SMF, dual LC connector

DWDM-XFP Modules

Note Because there are no configurable PIDs, all CWDM and DWDM optics must be ordered as spares.

Minimum
Software Version

12.2(33)SRA

12.2(33)SRA

12.2(33)SRB1

OL-10362-13

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 15S

43

Supported Hardware

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR

Product ID
(append “=” for spares) Product Description

DWDM-XFP-30.33=

DWDM-XFP-31.12=

DWDM-XFP-31.90=

DWDM- XFP-32.68=

DWDM-XFP-34.25=

DWDM-XFP-35.04=

DWDM-XFP-35.82=

DWDM- XFP-36.61=

DWDM-XFP-38.19=

DWDM-XFP-38.98v

DWDM-XFP-39.77=

DWDM- XFP-40.56=

DWDM-XFP-42.14=

DWDM-XFP-42.94=

DWDM-XFP-43.73=

DWDM- XFP-44.53=

DWDM-XFP-46.12=

DWDM-XFP-46.92=

DWDM-XFP-47.72=

DWDM-XFP-48.51=

DWDM-XFP-50.12=

DWDM-XFP-50.92=

DWDM-XFP-51.72v

DWDM-XFP-52.52=

DWDM- XFP-54.13=

DWDM-XFP-54.94=

DWDM-XFP-55.75=

DWDM-XFP-56.55=

DWDM- XFP-58.17=

DWDM-XFP-58.98=

DWDM-XFP-59.79=

DWDM- XFP-60.61=

DWDM XFP 1530.33 nm XFP (100 GHz ITU grid) 12.2(33)SRB3

DWDM XFP 1531.12 nm XFP (100 GHz ITU grid) 12.2(33)SRB3

DWDM XFP 1531.90 nm XFP (100 GHz ITU grid) 12.2(33)SRB3

DWDM XFP 1532.68 nm XFP (100 GHz ITU grid) 12.2(33)SRB3

DWDM XFP 1535.25 nm XFP (100 GHz ITU grid) 12.2(33)SRB3

DWDM XFP 1535.04 nm XFP (100 GHz ITU grid) 12.2(33)SRB3

DWDM XFP 1535.82 nm XFP (100 GHz ITU grid) 12.2(33)SRB3

DWDM XFP 1536.61 nm XFP (100 GHz ITU grid) 12.2(33)SRB3

DWDM XFP 1538.19 nm XFP (100 GHz ITU grid) 12.2(33)SRB3

DWDM XFP 1538.98 nm XFP (100 GHz ITU grid) 12.2(33)SRB3

DWDM XFP 1539.77 nm XFP (100 GHz ITU grid) 12.2(33)SRB3

DWDM XFP 1540.56 nm XFP (100 GHz ITU grid) 12.2(33)SRB3

DWDM XFP 1542.14 nm XFP (100 GHz ITU grid) 12.2(33)SRB3

DWDM XFP 1542.94 nm XFP (100 GHz ITU grid) 12.2(33)SRB3

DWDM XFP 1543.73 nm XFP (100 GHz ITU grid) 12.2(33)SRB3

DWDM XFP 1544.53 nm XFP (100 GHz ITU grid) 12.2(33)SRB3

DWDM XFP 1546.12 nm XFP (100 GHz ITU grid) 12.2(33)SRB3

DWDM XFP 1546.92 nm XFP (100 GHz ITU grid) 12.2(33)SRB3

DWDM XFP 1547.72 nm XFP (100 GHz ITU grid) 12.2(33)SRB3

DWDM XFP 1548.51 nm XFP (100 GHz ITU grid) 12.2(33)SRB3

DWDM XFP 1550.12 nm XFP (100 GHz ITU grid) 12.2(33)SRB3

DWDM XFP 1550.92 nm XFP (100 GHz ITU grid) 12.2(33)SRB3

DWDM XFP 1551.72 nm XFP (100 GHz ITU grid) 12.2(33)SRB3

DWDM XFP 1552.52 nm XFP (100 GHz ITU grid) 12.2(33)SRB3

DWDM XFP 1554.13 nm XFP (100 GHz ITU grid) 12.2(33)SRB3

DWDM XFP 1554.94 nm XFP (100 GHz ITU grid) 12.2(33)SRB3

DWDM XFP 1555.75 nm XFP (100 GHz ITU grid) 12.2(33)SRB3

DWDM XFP 1556.55 nm XFP (100 GHz ITU grid) 12.2(33)SRB3

DWDM XFP 1558.17 nm XFP (100 GHz ITU grid) 12.2(33)SRB3

DWDM XFP 1558.98 nm XFP (100 GHz ITU grid) 12.2(33)SRB3

DWDM XFP 1559.79 nm XFP (100 GHz ITU grid) 12.2(33)SRB3

DWDM XFP 1560.61 nm XFP (100 GHz ITU grid) 12.2(33)SRB3

Minimum
Software Version

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 15S

44

OL-10362-13

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR

Gigabit Interface Converters (GBICs)

Note The support listed in this section applies to all modules that use GBICs, including OSM LAN ports and

OSM Gigabit Ethernet WAN ports.

Supported Hardware

Product ID
(append “=” for spares) Product Description

WDM-GBIC-REC

DWDM-GBIC

CWDM-GBIC

WS-G5483

WS-G5484

WS-G5486

WS-G5487

CWDM-GBIC-1470=

CWDM-GBIC-1490=

CWDM-GBIC-1510=

CWDM-GBIC-1530=

CWDM-GBIC-1550=

CWDM-GBIC-1570=

CWDM-GBIC-1590=

CWDM-GBIC-1610=

DWDM-GBIC-60.61=

DWDM-GBIC-59.79=

DWDM-GBIC-58.98=

DWDM-GBIC-58.17=

DWDM-GBIC-56.55=

DWDM-GBIC-55.75=

DWDM-GBIC-54.94=

DWDM-GBIC-54.13=

DWDM-GBIC-52.52=

DWDM-GBIC-51.72=

DWDM-GBIC-50.92=

DWDM-GBIC-50.12=

DWDM-GBIC-48.51=

DWDM-GBIC-47.72=

DWDM-GBIC-46.92=

DWDM-GBIC-46.12=

Receive-only wavelength division multiplexing (WDM) GBIC 12.2(33)SRA

Dense wavelength division multiplexing (DWDM) GBIC 12.2(33)SRA

Coarse wavelength division multiplexing (CWDM) GBIC 12.2(33)SRA

1000BASET GBIC 12.2(33)SRA

Short wavelength, 1000BASE-SX 12.2(33)SRA

Long wavelength/long haul, 1000BASE-LX/LH 12.2(33)SRA

Extended distance, 1000BASE-ZX 12.2(33)SRA

Cisco 1000BASE-CWDM GBIC 1470 nm 12.2(33)SRA

Cisco 1000BASE-CWDM GBIC 1490 nm 12.2(33)SRA

Cisco 1000BASE-CWDM GBIC 1510 nm 12.2(33)SRA

Cisco 1000BASE-CWDM GBIC 1530 nm 12.2(33)SRA

Cisco 1000BASE-CWDM GBIC 1550 nm 12.2(33)SRA

Cisco 1000BASE-CWDM GBIC 1570 nm 12.2(33)SRA

Cisco 1000BASE-CWDM GBIC 1590 nm 12.2(33)SRA

Cisco 1000BASE-CWDM GBIC 1610 nm 12.2(33)SRA

1000BASE-DWDM GBIC 1560.61 nm 12.2(33)SRA

1000BASE-DWDM GBIC 1559.79 nm 12.2(33)SRA

1000BASE-DWDM GBIC 1558.98 nm 12.2(33)SRA

1000BASE-DWDM GBIC 1558.17 nm 12.2(33)SRA

1000BASE-DWDM GBIC 1556.55 nm 12.2(33)SRA

1000BASE-DWDM GBIC 1555.75 nm 12.2(33)SRA

1000BASE-DWDM GBIC 1554.94 nm 12.2(33)SRA

1000BASE-DWDM GBIC 1554.13 nm 12.2(33)SRA

1000BASE-DWDM GBIC 1552.52 nm 12.2(33)SRA

1000BASE-DWDM GBIC 1551.72 nm 12.2(33)SRA

1000BASE-DWDM GBIC 1550.92 nm 12.2(33)SRA

1000BASE-DWDM GBIC 1550.12 nm 12.2(33)SRA

1000BASE-DWDM GBIC 1548.51 nm 12.2(33)SRA

1000BASE-DWDM GBIC 1547.72 nm 12.2(33)SRA

1000BASE-DWDM GBIC 1546.92 nm 12.2(33)SRA

1000BASE-DWDM GBIC 1546.12 nm 12.2(33)SRA

Minimum
Software Version

OL-10362-13

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 15S

45

Supported Hardware

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR

Product ID
(append “=” for spares) Product Description

DWDM-GBIC-44.53=

DWDM-GBIC-43.73=

DWDM-GBIC-42.94=

DWDM-GBIC-42.14=

DWDM-GBIC-40.56=

DWDM-GBIC-39.77=

DWDM-GBIC-39.98=

DWDM-GBIC-38.19=

DWDM-GBIC-36.61=

DWDM-GBIC-35.82=

DWDM-GBIC-35.04=

DWDM-GBIC-34.25=

DWDM-GBIC-32.68=

DWDM-GBIC-31.90=

DWDM-GBIC-31.12=

DWDM-GBIC-30.33=

1000BASE-DWDM GBIC 1544.53 nm 12.2(33)SRA

1000BASE-DWDM GBIC 1543.73 nm 12.2(33)SRA

1000BASE-DWDM GBIC 1542.94 nm 12.2(33)SRA

1000BASE-DWDM GBIC 1542.14 nm 12.2(33)SRA

1000BASE-DWDM GBIC 1540.56 nm 12.2(33)SRA

1000BASE-DWDM GBIC 1539.77 nm 12.2(33)SRA

1000BASE-DWDM GBIC 1539.98 nm 12.2(33)SRA

1000BASE-DWDM GBIC 1538.19 nm 12.2(33)SRA

1000BASE-DWDM GBIC 1536.61 nm 12.2(33)SRA

1000BASE-DWDM GBIC 1535.82 nm 12.2(33)SRA

1000BASE-DWDM GBIC 1535.04 nm 12.2(33)SRA

1000BASE-DWDM GBIC 1534.25 nm 12.2(33)SRA

1000BASE-DWDM GBIC 1532.68 nm 12.2(33)SRA

1000BASE-DWDM GBIC 1531.90 nm 12.2(33)SRA

1000BASE-DWDM GBIC 1531.12 nm 12.2(33)SRA

1000BASE-DWDM GBIC 1530.33 nm 12.2(33)SRA

Minimum
Software Version

Power over Ethernet Daughtercards

Note The Power over Ethernet (PoE) daughtercard “Power Required” values do not include the power drawn

by phones.

Product ID

(append “=” for spares)

WS-F6K-FE48X2-AF

WS-F6K-GE48-AF

WS-F6K-GE48-AF

WS-F6K-VPWR-GE

Power
Required Product Description

0.42 A@42 V IEEE 802.3af PoE daughtercard for WS-X6148X2-RJ-45 and WS-X6196-RJ-21.

With Supervisor Engine 720 12.2(33)SRA

With Supervisor Engine 32 12.2(33)SRA

0.18 A@42 V IEEE 802.3af PoE daughtercard for WS-X6548-GE-TX and

WS-X6148-GE-TX

With Supervisor Engine 720 12.2(33)SRA

0.18 A@42 V IEEE 802.3af PoE daughtercard for WS-X6148-RJ-45 and WS-X6148-RJ-21

With Supervisor Engine 720 12.2(33)SRA

0.42 A@42 V PoE daughtercard for WS-X6548-GE-TX and

WS-X6148-GE-TX

With Supervisor Engine 720 12.2(33)SRA

Minimum
Software Version

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 15S

46

OL-10362-13

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR

Supported Hardware

Product ID

(append “=” for spares)

WS-F6K-VPWR

Power
Required Product Description

None PoE daughtercard for WS-X6348-RJ-45, WS-X6348-RJ-21V, WS-X6148-RJ-45,

and WS-X6148-RJ-21

With Supervisor Engine 720 12.2(33)SRA

10/100/1000 Ethernet Switching Modules

Product ID

(append “=” for spares)

WS-X6748-GE-TX

Note

Power
Required Product Description

7.00 A@42 V 48-port 10/100/1000 RJ-45

• CEF720 with WS-X6700-CFC (adds 0.75 A@42 V)

• dCEF720 with WS-F6700-DFC3BXL (adds 3.30 A@42 V)

• dCEF720 with WS-F6700-DFC3B (adds 3.00 A@42 V)

• Supports egress multicast replication

• QoS architecture:

–

With DFC3: 2q8t/1p3q8t

–

With CFC: 1q8t/1p3q8t

• Number of ports: 48

Number of port groups: 4
Port ranges per port group: 1–12, 13–24, 25–36, 37–48

Supported with Supervisor Engine 720 12.2(33)SRA

Supported with RSP 720-1GE 12.2(33)SRB

Supported with RSP 720-10GE 12.2(33)SRC

Minimum
Software Version

Minimum
Software Version

WS-X6748-GE-TX requires one of the following:

•

–

WS-F6700-DFC3BXL (3.30 A@42 V)

–

WS-F6700-DFC3B (3.00 A@42 V)

–

WS-X6700-CFC (0.75 A@42 V)

• WS-X6748-GE-TX ships with WS-X6700-CFC installed unless ordered with WS-F6700-DFC3BXL or

WS-F6700-DFC3B.

• WS-X6748-GE-TX is supported in the WS-C6503-E chassis.

• WS-X6748-GE-TX is not supported in the WS-C6503 and CISCO7603 chassis.

• In a 13-slot chassis, WS-X6748-GE-TX is supported only in slots 9 through 13 and does not power up in other slots.

• On WS-X6748-GE-TX ports, STP BPDUs are not exempt from Traffic Storm Control suppression. Do not configure

Traffic Storm Control on STP-protected WS-X6748-GE-TX ports that interconnect network devices.

OL-10362-13

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 15S

47

Supported Hardware

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR

Product ID

(append “=” for spares)

WS-X6548-GE-TX

WS-X6548V-GE-TX

WS-X6548-GE-45AF

Note

Power
Required Product Description

2.98 A@42 V 48-port 10/100/1000 Mbps

3.40 A@42 V

3.16 A@42 V

• RJ-45

• CEF256

• WS-X6548-GE-TX supports WS-F6K-VPWR-GE and WS-F6K-GE48-AF

• WS-X6548V-GE-TX supports WS-F6K-VPWR-GE

• WS-X6548-GE-45AF has WS-F6K-GE48-AF

• QoS port architecture (Rx/Tx): 1q2t/1p2q2t

Number of ports: 48
Number of port groups: 2
Port ranges per port group: 1–24, 25–48

With Supervisor Engine 720
(except WS-F6K-GE48-AF)

WS-F6K-GE48-AF with Supervisor Engine 720 12.2(33)SRA

With Supervisor Engine 32 12.2(33)SRA

WS-F6K-GE48-AF with Supervisor Engine 32 12.2(33)SRA

With RSP 720-1GE 12.2(33)SRB

With RSP 720-10GE 12.2(33)SRC

Minimum
Software Version

12.2(33)SRA

More than 1 Gbps of traffic per EtherChannel is supported on the WS-X6548-GE-TX (and voice-power

•

daughtercard-equipped) switching modules.

• WS-X6548-GE-TX and WS-X6548V-GE-TX do not support these features:

–

ISL trunking

–

Jumbo frames

–

802.1Q tunneling

–

Traffic storm control

WS-X6148A-GE-TX

WS-X6148-GE-45AF

2.50 A@42 V 48-port 10/100/1000 Mbps

2.68 A@42 V

• RJ-45

• WS-X6148A-GE-TX supports WS-F6K-GE48-AF

• WS-X6148A-GE-45AF has WS-F6K-GE48-AF

• QoS port architecture (Rx/Tx): 1q2t/1p2q2t

• Number of ports: 48

Number of port groups: 2
Port ranges per port group: 1–24, 25–48

With Supervisor Engine 720 12.2(33)SRA

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 15S

48

OL-10362-13

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR

Supported Hardware

Product ID

(append “=” for spares)

Power
Required Product Description

With Supervisor Engine 32 12.2(33)SRA

Note WS-X6148A-GE-TX and WS-X6148A-GE-45AF do not support these features:

• More than 1 Gbps of traffic per EtherChannel

• WS-F6K-DFC3B, or WS-F6K-DFC3BXL

• ISL trunking

• Traffic storm control

WS-X6148-GE-TX

WS-X6148V-GE-TX

WS-X6148-GE-45AF

2.47 A@42 V 48-port 10/100/1000 Mbps

2.89 A@42 V • RJ-45

2.65 A@42 V • WS-X6148-GE-TX supports WS-F6K-VPWR-GE and WS-F6K-GE48-AF

• WS-X6148V-GE-TX has WS-F6K-VPWR-GE

• WS-X6148-GE-45AF has WS-F6K-GE48-AF

• QoS port architecture (Rx/Tx): 1q2t/1p2q2t

• Number of ports: 48

Number of port groups: 2
Port ranges per port group: 1–24, 25–48

With Supervisor Engine 720
(except WS-F6K-GE48-AF)

WS-F6K-GE48-AF with Supervisor Engine 720 12.2(33)SRA

With Supervisor Engine 32 12.2(33)SRA

WS-F6K-GE48-AF with Supervisor Engine 32 12.2(33)SRA

With RSP 720-1GE 12.2(33)SRB

With RSP 720-10GE 12.2(33)SRC

Note WS-X6148-GE-TX, WS-X6148V-GE-TX, and WS-X6148-GE-45AF do not support these features:

Minimum
Software Version

12.2(33)SRA

• More than 1 Gbps of traffic per EtherChannel

• WS-F6K-DFC3B, or WS-F6K-DFC3BXL

• ISL trunking

• Jumbo frames

• 802.1Q tunneling

• Traffic storm control

OL-10362-13

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 15S

49

Supported Hardware

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR

Product ID

(append “=” for spares)

WS-X6516-GE-TX

Power
Required Product Description

3.45 A@42 V 16-port 10/100/1000BASE-T

• CEF256

• With Supervisor Engine 720:

–

dCEF256 with WS-F6K-DFC3BXL (adds 1.47 A@42 V)

–

dCEF256 with WS-F6K-DFC3B (adds 1.67 A@42 V)

• QoS port architecture (Rx/Tx): 1p1q4t/1p2q2t

• Number of ports: 16

Number of port groups: 2
Port ranges per port group: 1–8, 9–16

With Supervisor Engine 720 12.2(33)SRA

With Supervisor Engine 32 12.2(33)SRA

With RSP 720-1GE 12.2(33)SRB

With RSP 720-10GE 12.2(33)SRC

Fast Ethernet Switching Modules

Minimum
Software Version

Product ID

(append “=” for spares)

WS-X6148-FE-SFP

Power
Required Product Description

2.30 A@42 V 48-port 100BASE-FX

• Requires Fast Ethernet SFPs

• QoS port architecture (Rx/Tx): 1p1q4t/1p3q8t

With Supervisor Engine 720 12.2(33)SRA

With Supervisor Engine 32 12.2(33)SRA

With RSP 720-1GE 12.2(33)SRB

With RSP 720-10GE 12.2(33)SRC

Minimum
Software Version

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 15S

50

OL-10362-13

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR

Supported Hardware

Product ID

(append “=” for spares)

WS-X6524-100FX-MM

WS-X6324-100FX-SM

WS-X6324-100FX-MM

Power
Required Product Description

1.90 A@42 V 24-port 100FX Ethernet multimode

• CEF256

• With Supervisor Engine 720:

–

dCEF256 with WS-F6K-DFC3BXL (adds 1.47 A@42 V)

–

dCEF256 with WS-F6K-DFC3B (adds 1.67 A@42 V)

• QoS port architecture (Rx/Tx): 1p1q0t/1p3q1t

• Number of ports: 24

Number of port groups: 1
Port ranges per port group: 1–24

With Supervisor Engine 720 12.2(33)SRA

With Supervisor Engine 32 12.2(33)SRA

With RSP 720-1GE 12.2(33)SRB

With RSP 720-10GE 12.2(33)SRC

1.52 A@42 V 24-port 100FX Ethernet

1.52 A@42 V • Single-mode and multimode MT-RJ

• 128-KB per-port packet buffers

• QoS port architecture (Rx/Tx): 1q4t/2q2t

Minimum
Software Version

WS-X6224-100FX-MT

• Number of ports: 24

Number of port groups: 2
Port ranges per port group: 1–12, 13–24

With Supervisor Engine 720 12.2(33)SRA

With Supervisor Engine 32 12.2(33)SRA

With RSP 720-1GE 12.2(33)SRB

With RSP 720-10GE 12.2(33)SRC

1.90 A@42 V 24-port 100FX Ethernet Multimode MT-RJ

• QoS port architecture (Rx/Tx): 1q4t/2q2t

• Number of ports: 24

Number of port groups: 2
Port ranges per port group: 1–12, 13–24

With Supervisor Engine 720 12.2(33)SRA

With Supervisor Engine 32 12.2(33)SRA

With RSP 720-1GE 12.2(33)SRB

With RSP 720-10GE 12.2(33)SRC

OL-10362-13

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 15S

51

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR

Supported Hardware

Ethernet/Fast Ethernet (10/100) Switching Modules

Product ID

(append “=” for spares)

WS-X6548-RJ-45

WS-X6548-RJ-21

Power
Required Product Description

2.90 A@42 V 48-port 10/100TX RJ-45

• CEF256

• With Supervisor Engine 720:

–

dCEF256 with WS-F6K-DFC3BXL (adds 1.47 A@42 V)

–

dCEF256 with WS-F6K-DFC3B (adds 1.67 A@42 V)

• QoS port architecture (Rx/Tx): 1p1q0t/1p3q1t

• Number of ports: 48

Number of port groups: 1
Port ranges per port group: 1–48

With Supervisor Engine 720 12.2(33)SRA

With Supervisor Engine 32 12.2(33)SRA

With RSP 720-1GE 12.2(33)SRB

With RSP 720-10GE 12.2(33)SRC

2.90 A@42 V 48-port 10/100TX RJ-21

• CEF256

• With Supervisor Engine 720:

–

dCEF256 with WS-F6K-DFC3BXL (adds 1.47 A@42 V)

–

dCEF256 with WS-F6K-DFC3B (adds 1.67 A@42 V)

• QoS port architecture (Rx/Tx): 1p1q0t/1p3q1t

Minimum
Software Version

WS-X6148X2-RJ-45

WS-X6148X2-45AF

WS-X6196-RJ-21

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 15S

52

• Number of ports: 48

Number of port groups: 1
Port ranges per port group: 1–48

With Supervisor Engine 720 12.2(33)SRA

With Supervisor Engine 32 12.2(33)SRA

With RSP 720-1GE 12.2(33)SRB

With RSP 720-10GE 12.2(33)SRC

2.65 A@42 V 96-port 10/100TX RJ-45

2.92 A@42 V • QoS port architecture (Rx/Tx): 1p1q0t/1p3q1t

• WS-X6148X2-RJ-45 supports WS-F6K-FE48X2-AF

• WS-X6148X2-45AF has WS-F6K-FE48X2-AF

With Supervisor Engine 720 12.2(33)SRA

With Supervisor Engine 32 12.2(33)SRA

With RSP 720-1GE 12.2(33)SRB

With RSP 720-10GE 12.2(33)SRC

2.74 A@42 V 96-port 10/100TX RJ-21

OL-10362-13

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR

Supported Hardware

Product ID

(append “=” for spares)

WS-X6196-21AF

WS-X6348-RJ-45

WS-X6348-RJ-45V

WS-X6348-RJ-21V

Power
Required Product Description

3.16 A@42 V • QoS port architecture (Rx/Tx): 1p1q0t/1p3q1t

• WS-X6196-RJ-21 supports WS-F6K-FE48X2-AF

• WS-X6196-21AF has WS-F6K-FE48X2-AF

With Supervisor Engine 720 12.2(33)SRA

With Supervisor Engine 32 12.2(33)SRA

With RSP 720-1GE 12.2(33)SRB

With RSP 720-10GE 12.2(33)SRC

2.39 A@42 V 48-port 10/100TX RJ-45

2.39 A@42 V • 128-KB per-port packet buffers

• QoS port architecture (Rx/Tx): 1q4t/2q2t

• WS-X6348-RJ-45 supports WS-F6K-VPWR

• WS-X6348-RJ-45V has WS-F6K-VPWR

• Number of ports: 48

Number of port groups: 4
Port ranges per port group: 1–12, 13–24, 25–36, 37–48

With Supervisor Engine 720 12.2(33)SRA

With Supervisor Engine 32 12.2(33)SRA

With RSP 720-1GE 12.2(33)SRB

With RSP 720-10GE 12.2(33)SRC

2.39 A@42 V 48-port 10/100TX RJ-21

• 128-KB per-port packet buffers

• QoS port architecture (Rx/Tx): 1q4t/2q2t

Minimum
Software Version

WS-X6248-RJ-45

OL-10362-13

• Has WS-F6K-VPWR

• Number of ports: 48

Number of port groups: 4
Port ranges per port group: 1–12, 13–24, 25–36, 37–48

With Supervisor Engine 720 12.2(33)SRA

With Supervisor Engine 32 12.2(33)SRA

With RSP 720-1GE 12.2(33)SRB

With RSP 720-10GE 12.2(33)SRC

2.69 A@42 V 48-port 10/100TX RJ-45

• QoS port architecture (Rx/Tx): 1q4t/2q2t

• Number of ports: 48

Number of port groups: 4
Port ranges per port group: 1–12, 13–24, 25–36, 37–48

With Supervisor Engine 720 12.2(33)SRA

With Supervisor Engine 32 12.2(33)SRA

With RSP 720-1GE 12.2(33)SRB

With RSP 720-10GE 12.2(33)SRC

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 15S

53

Supported Hardware

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR

Product ID

(append “=” for spares)

WS-X6248A-TEL

WS-X6248-TEL

WS-X6148A-RJ-45
WS-X6148A-45AF

Power
Required Product Description

2.69 A@42 V 48-port 10/100TX RJ-21

• 128-KB per-port packet buffers

• QoS port architecture (Rx/Tx): 1q4t/2q2t

• Number of ports: 48

Number of port groups: 4
Port ranges per port group: 1–12, 13–24, 25–36, 37–48

With Supervisor Engine 720 12.2(33)SRA

With Supervisor Engine 32 12.2(33)SRA

With RSP 720-1GE 12.2(33)SRB

With RSP 720-10GE 12.2(33)SRC

2.69 A@42 V 48-port 10/100TX RJ-21

• QoS port architecture (Rx/Tx): 1q4t/2q2t

• Number of ports: 48

Number of port groups: 4
Port ranges per port group: 1–12, 13–24, 25–36, 37–48

With Supervisor Engine 720 12.2(33)SRA

With Supervisor Engine 32 12.2(33)SRA

With RSP 720-1GE 12.2(33)SRB

With RSP 720-10GE 12.2(33)SRC

2.39 A@42 V

2.57 A@42 V

48-port 10/100TX RJ-45

• 128-KB per-port packet buffers

• QoS port architecture (Rx/Tx): 1q4t/2q2t

• WS-X6148A-RJ-45 supports WS-F6K-GE48-AF

Minimum
Software Version

WS-X6148-RJ-45

WS-X6148-RJ-45V

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 15S

54

• WS-X6148A-45AF has WS-F6K-GE48-AF

• Number of ports: 48

Number of port groups: 4
Port ranges per port group: 1–12, 13–24, 25–36, 37–48

With Supervisor Engine 720 12.2(33)SRA

With Supervisor Engine 32 12.2(33)SRA

With RSP 720-1GE 12.2(33)SRB

With RSP 720-10GE 12.2(33)SRC

2.39 A@42 V 48-port 10/100TX RJ-45

2.39 A@42 V 128-KB per-port packet buffers

OL-10362-13

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR

Supported Hardware

Product ID

(append “=” for spares)

WS-X6148-45AF

WS-X6148-RJ-21

WS-X6148-RJ-21V

WS-X6148-21AF

Power
Required Product Description

2.57 A@42 V QoS port architecture (Rx/Tx): 1q4t/2q2t

• WS-X6148-RJ-45 supports WS-F6K-VPWR and WS-F6K-GE48-AF

• WS-X6148-RJ-45V has WS-F6K-VPWR

• WS-X6148-45AF has WS-F6K-GE48-AF

• Number of ports: 48

Number of port groups: 4
Port ranges per port group: 1–12, 13–24, 25–36, 37–48

With Supervisor Engine 720
(except with WS-F6K-GE48-AF)

WS-F6K-GE48-AF with Supervisor Engine 720 12.2(33)SRA

With Supervisor Engine 32 12.2(33)SRA

WS-F6K-GE48-AF with Supervisor Engine 32 12.2(33)SRA

With RSP 720-1GE 12.2(33)SRB

With RSP 720-10GE 12.2(33)SRC

2.39 A@42 V 48-port 10/100TX RJ-21

2.39 A@42 V • 128-KB per-port packet buffers

2.57 A@42 V • QoS port architecture (Rx/Tx): 1q4t/2q2t

• WS-X6148-RJ-21 supports WS-F6K-VPWR and WS-F6K-GE48-AF

Minimum
Software Version

12.2(33)SRA

• WS-X6148-RJ-21V has WS-F6K-VPWR

• WS-X6148-21AF has WS-F6K-GE48-AF

• Number of ports: 48

Number of port groups: 4
Port ranges per port group: 1–12, 13–24, 25–36, 37–48

With Supervisor Engine 720
(except WS-F6K-GE48-AF)

WS-F6K-GE48-AF with Supervisor Engine 720 12.2(33)SRA

With Supervisor Engine 32 12.2(33)SRA

WS-F6K-GE48-AF with Supervisor Engine 32 12.2(33)SRA

With RSP 720-1GE 12.2(33)SRB

With RSP 720-10GE 12.2(33)SRC

12.2(33)SRA

OL-10362-13

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 15S

55

Supported Hardware

Ethernet Switching Modules

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR

Product ID

(append “=” for spares)

WS-X6024-10FL-MT

Power
Required Product Description

1.52 A@42 V 24-port 10BASE-FL MT-RJ

• QoS port architecture (Rx/Tx): 1q4t/2q2t

• Number of ports: 24

Number of port groups: 2
Port ranges per port group: 1–12, 13–24

With Supervisor Engine 720 12.2(33)SRA

With Supervisor Engine 32 12.2(33)SRA

With RSP 720-1GE 12.2(33)SRB

With RSP 720-10GE 12.2(33)SRC

Optical Services Modules (OSMs)

• OSM Guidelines and Restrictions, page 56

• Gigabit Ethernet WAN, page 57

• OC-48 Packet over SONET, page 57

• OC-48 DPT/Packet over SONET, page 57

• OC-12 Packet over SONET, page 58

• OC-3 Packet over SONET, page 58

Minimum
Software Version

• OC-12 Channelized, page 58

• CT3/T1 Channelized/Unchannelized, page 59

• OC-12 ATM, page 59

Note From 12.2(33) SRE onwards, OSMs are not supported on 7600 routers. For more information on EOS,

refer http://www.cisco.com/en/US/products/hw/routers/ps368/prod_eol_notice0900aecd8073fdf9.html

OSM Guidelines and Restrictions

• Supervisor Engine 32 does not support OSMs.

• OSMs require a minimum of 256 MB of synchronous dynamic random-access memory (SDRAM)

—Refer to this publication for memory upgrade procedures:

http://www.cisco.com/univercd/cc/td/doc/product/core/cis7600/hardware/osmodule/app_upgr.htm

• OSMs are CEF256 modules.

• OSM WAN port numbering starts with 1.

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 15S

56

OL-10362-13

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR

• On OSMs with Gigabit Ethernet GBIC Layer 2 LAN ports:

–

OSM LAN port numbering starts with 1.

–

The LAN ports are in a single port group.

• The OSM-2+4GE-WAN+ and the OC-12 Packet-over-SONET OSMs have been tested with the

service modules and WS-SUP720.

• OSMs are not supported in the Cisco 7604 or in any S-series chassis.

Gigabit Ethernet WAN

Supported Hardware

Product ID

(append “=” for spares)

OSM-2+4GE-WAN+

Power
Required Product Description

5.08 A@42 V 4-port Gigabit Ethernet WAN (GBIC) with two Layer 2 LAN ports; CEF256

OC-48 Packet over SONET

Note Also has four Layer 2 LAN ports.

Product ID

(append “=” for spares)

OSM-1OC48-POS-SI+
OSM-1OC48-POS-SL+
OSM-1OC48-POS-SS+

Power
Required Product Description

3.90 A@42 V Enhanced 1-port OC-48/STM-16 SONET/SDH OSM, SM-IR; CEF256

OC-48 DPT/Packet over SONET

Minimum
Software Version

With Supervisor Engine 720 12.2(33)SRA

Minimum
Software Version

Enhanced 1-port OC-48/STM-16 SONET/SDH OSM, SM-LR; CEF256
Enhanced 1-port OC-48/STM-16 SONET/SDH OSM, SM-SR; CEF256

With Supervisor Engine 720 12.2(33)SRA

Note Also has four Layer 2 LAN ports.

Product ID

(append “=” for spares)

OSM-2OC48/1DPT-SS
OSM-2OC48/1DPT-SI
OSM-2OC48/1DPT-SL

OL-10362-13

Power
Required Product Description

5.75 A@42 V 2-port OC-48 DPT/POS, SM-SR; CEF256

Minimum
Software Version

2-port OC-48 DPT/POS, SM-IR; CEF256
2-port OC-48 DPT/POS, SM-LR; CEF256

With Supervisor Engine 720 12.2(33)SRA

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 15S

57

Supported Hardware

OC-12 Packet over SONET

Note Also has four Layer 2 LAN ports.

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR

Product ID

(append “=” for spares)

OSM-4OC12-POS-SI+

OSM-2OC12-POS-SI+

Power
Required Product Description

4.55 A@42 V Enhanced 4-port OC-12c/STM-4c POS, SM-IR; CEF256

3.36 A@42 V Enhanced 2-port OC-12c/STM-4c POS, SM-IR; CEF256

OC-3 Packet over SONET

Note Also has four Layer 2 LAN ports.

Product ID

(append “=” for spares)

OSM-16OC3-POS-SI+

OSM-8OC3-POS-SI+
OSM-8OC3-POS-SL+

OSM-4OC3-POS-SI+

Power
Required Product Description

4.80 A@42 V Enhanced 16-port OC-3c/STM-1c POS, SM-IR; CEF256

3.57 A@42 V Enhanced 8-port OC-3c/STM-1c POS, SM-IR; CEF256

2.44 A@42 V Enhanced 4-port OC-3c/STM-1c POS, SM-IR; CEF256

Minimum
Software Version

With Supervisor Engine 720 12.2(33)SRA

With Supervisor Engine 720 12.2(33)SRA

Minimum
Software Version

With Supervisor Engine 720 12.2(33)SRA

Enhanced 8-port OC-3c/STM-1c POS, SM-LR; CEF256

With Supervisor Engine 720 12.2(33)SRA

With Supervisor Engine 720 12.2(33)SRA

OC-12 Channelized

Note Also has four Layer 2 LAN ports.

Product ID

(append “=” for spares)

OSM-1CHOC12/T3-SI
OSM-1CHOC12/T1-SI

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 15S

58

Power
Required Product Description

4.40 A@42 V

2.80 A@42 V

Minimum
Software Version

1-port channelized OC-12, SM-IR; CEF256
1-port channelized OC-12, SM-IR; CEF256

With Supervisor Engine 720 12.2(33)SRA

OL-10362-13

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR

CT3/T1 Channelized/Unchannelized

Note OSM-12CT3/T1 has mini-SMB connectors for use with 75-ohm copper coaxial cable.

Supported Hardware

Product ID

(append “=” for spares)

OSM-12CT3/T1

Power
Required Product Description

2.80 A@42 V 12-port channelized/unchannelized CT3/T1; CEF256

With Supervisor Engine 720 12.2(33)SRA

OC-12 ATM

Note Also has four Layer 2 LAN ports.

Product ID

(append “=” for spares)

OSM-2OC12-ATM-MM+
OSM-2OC12-ATM-SI+

Power
Required Product Description

4.00 A@42 V Enhanced 2-port OC-12/STM-4 ATM OSM, MM; CEF256
Enhanced 2-port OC-12/STM-4 ATM OSM, SM-IR; CEF256

With Supervisor Engine 720 12.2(33)SRA

SPA Interface Processors (SIPs)

Minimum
Software Version

Minimum
Software Version

Note See the Release Notes for Cisco IOS Release 12.2SR on the Cisco 7600 Series Routers for information

about additional procedures required to support SIPs with Cisco IOS Release 12.2(33)SRA and later
releases.

Product ID

(append “=” for spares)

7600-SIP-600

Power
Required Product Description

8.14 A@42 V SPA Interface Processor-600

Supported with Supervisor Engine 720 12.2(33)SRA

With RSP720-10GE 12.2(33)SRE

With RSP720 12.2(33)SRB

Note Supervisor Engine 32 does not support 7600-SIP-600.

7600-SIP-400

6.31 A@42 V SPA Interface Processor-400

With Supervisor Engine 720 12.2(33)SRA

With Supervisor Engine 32 12.2(33)SRA

Note For release 12.2(33)SRB, oversubscription is supported.

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 15S

OL-10362-13

Minimum
Software Version

59

Supported Hardware

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR

Product ID

(append “=” for spares)

7600-SIP-200

Power
Required Product Description

5.72 A@42 V SPA Interface Processor-200

SIP-400 Combinations

The SIP-400 linecard supports an aggregate forwarding rate of approximately 6 Mpps. Packet
forwarding is done by microcode on the network processors so enabling datapath features may reduce
performance.

For release 12.2(33)SRA, the total supported bandwidth for the SIP-400 is 4 Gigabits line rate for
Ethernet and 2.5 Gigabits line rate for SONET with selected services. There is no oversubscription
support. The product ordering tools would prevent combination of SPAs that add up to more than this
bandwidth and would reject such configurations.

For release 12.2(33)SRB and above, the following SPA combinations are supported on SIP-400:

• Any mix of POS, ATM, CEoP and serial SPAs up to an aggregate of OC-48

• One SPA-2X1GE SPA plus POS, ATM, CEoP, or Serial SPAs up to an aggregate of OC-24

• Two SPA-2X1GE SPAs

• Two SPA-5X1GE-V2 SPAs (oversubscribed)

Minimum
Software Version

With Supervisor Engine 720 12.2(33)SRA

With Supervisor Engine 32 12.2(33)SRA

• One SPA-1X10GE-L-V2 SPA (oversubscribed)

For release 12.2(33)SRD and above, the following SPA combinations are supported on SIP-400:

• Four SPA-4X1FE-TX-V2

• Two SPA-8X1FE-TX-V2

Refer to Shared Port Adapters (SPAs), page 60 for the minimum release required to support each SPA
type.

Shared Port Adapters (SPAs)

These sections describe SPAs:

• Ethernet SPAs, page 60

• POS SPAs, page 64

• ATM SPAs, page 66

• Serial SPAs, page 67

• Circuit Emulation over Packet (CEoP) SPAs, page 68

Ethernet SPAs

These sections describe Ethernet SPAs:

• Ten Gigabit Ethernet SPAs, page 61

• Gigabit Ethernet SPAs, page 62

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 15S

60

OL-10362-13

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR

• Fast Ethernet SPAs, page 64

Ten Gigabit Ethernet SPAs

Supported Hardware

Product ID
(append “=” for spares) SIP Support Product Description

SPA-1XTENGE-XFP

SPA-1XTENGE-XFP-V2

SPA-1X10GE-L-V2

SPA-1X10GE-L-V2

7600-SIP-600 1-port 10 Gigabit Ethernet SPA, LANPHY XFP Optics 12.2(33)SRA

7600-SIP-600 1-port 10 Gigabit Ethernet SPA, LANPHY XFP Optics 12.2(33)SRA

7600-SIP-600 1-port 10 Gigabit Ethernet SPA, SFP Optics 12.2(33)SRA

7600-SIP-400 1-port 10 Gigabit Ethernet SPA, SFP Optics 12.2(33)SRC

XFP Modules Supported in

XFP-10GLR-OC192SR 12.2(33)SRA

XFP-10GER-OC192IR 12.2(33)SRA

XFP-10GZR-OC192LR 12.2(33)SRA

DWDM-XFP-C 15.0(1)S

XFP modules supported in SPA-1X10GE-L-V2 on SIP-400.

XFP-10GER-OC192IR+= 12.2(33)SRD

DWDM-XFP-C 15.0(1)S

DWDM-XFP modules supported in SPA-1X10GE-L-V2 on SIP-600.

DWDM-XFP-30.33

DWDM-XFP-31.12

DWDM-XFP-31.90

DWDM- XFP-32.68

DWDM-XFP-34.25

DWDM-XFP-35.04

DWDM-XFP-35.82

DWDM- XFP-36.61

DWDM-XFP-38.19

DWDM-XFP-38.98

DWDM-XFP-39.77

DWDM- XFP-40.56

DWDM-XFP-42.14

DWDM-XFP-42.94

DWDM-XFP-43.73

DWDM- XFP-44.53

DWDM-XFP-46.12

DWDM-XFP-46.92

DWDM-XFP-47.72

DWDM- XFP-48.51

Minimum
Software Version

SPA-1XTENGE-XFP

= 12.2(33)SRB3

= 12.2(33)SRB3

= 12.2(33)SRB3

= 12.2(33)SRB3

= 12.2(33)SRB3

= 12.2(33)SRB3

= 12.2(33)SRB3

= 12.2(33)SRB3

= 12.2(33)SRB3

= 12.2(33)SRB3

= 12.2(33)SRB3

= 12.2(33)SRB3

= 12.2(33)SRB3

= 12.2(33)SRB3

= 12.2(33)SRB3

= 12.2(33)SRB3

= 12.2(33)SRB3

= 12.2(33)SRB3

= 12.2(33)SRB3

= 12.2(33)SRB3

OL-10362-13

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 15S

61

Supported Hardware

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR

Product ID
(append “=” for spares) SIP Support Product Description

DWDM-XFP-50.12= 12.2(33)SRB3

DWDM-XFP-50.92

DWDM-XFP-51.72

DWDM-XFP-52.52

DWDM- XFP-54.13

DWDM-XFP-54.94

DWDM-XFP-55.75

DWDM-XFP-56.55

DWDM- XFP-58.17

DWDM-XFP-58.98

DWDM-XFP-59.79

DWDM- XFP-60.61

DWDM-XFP-C 15.0(1)S

Gigabit Ethernet SPAs

Minimum
Software Version

= 12.2(33)SRB3

= 12.2(33)SRB3

= 12.2(33)SRB3

= 12.2(33)SRB3

= 12.2(33)SRB3

= 12.2(33)SRB3

= 12.2(33)SRB3

= 12.2(33)SRB3

= 12.2(33)SRB3

= 12.2(33)SRB3

= 12.2(33)SRB3

Product ID
(append “=” for spares) SIP Support Product Description

SPA-10X1GE

SPA-10X1GE-V2

SPA-5X1GE

SPA-5X1GE-V2

SPA-5X1GE-V2

SPA-2X1GE

SPA-2X1GE-V2

SPA-2X1GE-SYNCE

7600-SIP-600 10-port Gigabit Ethernet SPA, SFP Optics 12.2(33)SRA

7600-SIP-600 10-port Gigabit Ethernet SPA, SFP Optics 12.2(33)SRA

7600-SIP-600 5-port Gigabit Ethernet SPA, SFP Optics 12.2(33)SRA

7600-SIP-600 5-port Gigabit Ethernet SPA, SFP Optics 12.2(33)SRA

7600-SIP-400 5-port Gigabit Ethernet SPA, SFP Optics 12.2(33)SRB

7600-SIP-400 2-port Gigabit Ethernet SPA, SFP Optics 12.2(33)SRA

7600-SIP-400 2-port Gigabit Ethernet SPA, SFP Optics 12.2(33)SRB

7600-SIP-400 2-Port Gigabit Synchronous Ethernet SPA, SFP Optics 15.0 (1) S

SFPs Supported in
SUP32, WS-6724, and WS-X6748.

GLC-BX-D 12.2(33)SRD

GLC-BX-U 12.2(33)SRD

SFP-GE-S 12.2(33)SRA

SFP-GE-L 12.2(33)SRA

SFP-GE-Z 12.2(33)SRA

SFP-GE-T 12.2(33)SRB3

CWDM-SFP-1470

CWDM-SFP-1490

Minimum
Software Version

Gigabit Ethernet SPAs, SIP 400, SIP 600, ES-20, ES+, ES+combo,

= 12.2(33)SRD

= 12.2(33)SRD

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 15S

62

OL-10362-13

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR

Supported Hardware

Product ID
(append “=” for spares) SIP Support Product Description

CWDM-SFP-1510= 12.2(33)SRD

CWDM-SFP-1530

CWDM-SFP-1550

CWDM-SFP-1570

CWDM-SFP-1590

CWDM-SFP-1610

DWDM-SFP-3033

DWDM-SFP-3112

DWDM-SFP-3190

DWDM-SFP-3268

DWDM-SFP-3425

DWDM-SFP-3504

DWDM-SFP-3582

DWDM-SFP-3661

DWDM-SFP-3819

DWDM-SFP-3898

DWDM-SFP-3977

DWDM-SFP-4056

DWDM-SFP-4214

DWDM-SFP-4294

DWDM-SFP-4373

DWDM-SFP-4453

DWDM-SFP-4612

DWDM-SFP-4692

DWDM-SFP-4772

DWDM-SFP-4851

DWDM-SFP-5012

DWDM-SFP-5092

DWDM-SFP-5172

DWDM-SFP-5252

DWDM-SFP-5413

DWDM-SFP-5494

DWDM-SFP-5575

DWDM-SFP-5655

DWDM-SFP-5817

DWDM-SFP-5898

DWDM-SFP-5979

Minimum
Software Version

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

OL-10362-13

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 15S

63

Supported Hardware

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR

Product ID
(append “=” for spares) SIP Support Product Description

DWDM-SFP-6061= 12.2(33)SRD

DWDM-SFP-3346= 12.2(33)SRE

DWDM-SFP-3739= 12.2(33)SRE

DWDM-SFP-4134= 12.2(33)SRE

DWDM-SFP-4532= 12.2(33)SRE

DWDM-SFP-4931= 12.2(33)SRE

DWDM-SFP-5332= 12.2(33)SRE

DWDM-SFP-5736= 12.2(33)SRE

DWDM-SFP-6141= 12.2(33)SRE

SFPs Supported in

GLC-GE-100FX 15.0(1)S

Note GLC-GE-100FX SFP is not supported on SPA-2X1GE-V2 SPA.

Minimum
Software Version

Gigabit Ethernet SPAs

Fast Ethernet SPAs

Product ID
(append “=” for spares) SIP Support Product Description

SPA-4X1FE-TX-V2

SPA-8X1FE-TX-V2

SPA-4X1FE-TX-V2

SPA-8X1FE-TX-V2

7600-SIP-400 4-port 10/100 Ethernet SPA TX 12.2(33)SRD

7600-SIP-400 8-port 10/100 Ethernet SPA TX 12.2(33)SRD

7600-SIP-200 4-port 10/100 Ethernet SPA TX 12.2(33)SRA

7600-SIP-200 8-port 10/100 Ethernet SPA TX 12.2(33)SRA

POS SPAs

Product ID
(append “=” for spares) SIP Support Product Description

SPA-2XOC3-POS

7600-SIP-200
7600-SIP-400

2-port OC-3c/STM-1c POS SPA 12.2(33)SRA

SFP Modules Supported in

SFP-OC3-MM

SFP-OC3-SR

SFP-OC3-IR1

SFP-OC3-LR1

Minimum
Software Version

Minimum
Software Version

SPA-2XOC3-POS

12.2(33)SRA

12.2(33)SRA

12.2(33)SRA

12.2(33)SRA

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 15S

64

OL-10362-13

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR

Supported Hardware

Product ID
(append “=” for spares) SIP Support Product Description

SFP-OC3-LR2

ONS-SC-OC3-EL

SPA-4XOC3-POS

7600-SIP-200

4-port OC-3c/STM-1c POS SPA 12.2(33)SRA

7600-SIP-400

SFP Modules Supported in

SFP-OC3-MM

SFP-OC3-SR

SFP-OC3-IR1

SFP-OC3-LR1

SFP-OC3-LR2

ONS-SC-OC3-EL

SPA-1XOC12-POS

7600-SIP-400 1-port OC-12c/STM-4c POS SPA 12.2(33)SRA

SFP Modules Supported in

SFP-OC12-MM

SFP-OC12-SR

SFP-OC12-IR1

SFP-OC12-LR1

SFP-OC12-LR2

SPA-OC192POS-LR

SPA-OC192POS-VSR

SPA-OC192POS-XFP

7600-SIP-600 1-port OC-192c/STM-64 POS/RPR SPA, SM-LR, 12.2(33)SRA

7600-SIP-600 1-port OC-192c/STM-64 POS/RPR SPA, VSR, 12.2(33)SRA

7600-SIP-600 1-port OC-192c/STM-64 POS/RPR SPA, XFP Optics 12.2(33)SRA

XFP Modules Supported in SPA-OC192POS-XFP SPA

XFP-10GLR-OC192SR 12.2(33)SRA

XFP-10GER-OC192IR

XFP-10GZR-OC192LR

SPA-1XOC48POS/RPR

7600-SIP-400 1-port OC-48c/STM-16 SPA 12.2(33)SRA

SFP Modules Supported in

SFP-OC48-SR

SFP-OC48-IR1

SFP-OC48-LR2

SPA-2XOC48POS/RPR

7600-SIP-600 2 port OC-48 POS/RPR SPA with SFP Optics 12.2(33)SRA

SFP Modules Supported in

SFP-OC48-SR

SFP-OC48-IR1

SFP-OC48-LR2

SPA-4XOC48POS/RPR

7600-SIP-600 4-port OC-48c/STM-16 POS/DPT/RPR SPA 12.2(33)SRA

SFP Modules Supported in

Minimum
Software Version

12.2(33)SRA

15.0(1)S

SPA-4XOC3-POS SPAs

12.2(33)SRA

12.2(33)SRA

12.2(33)SRA

12.2(33)SRA

12.2(33)SRA

15.0(1)S

SPA-1XOC12-POS SPA

12.2(33)SRA

12.2(33)SRA

12.2(33)SRA

12.2(33)SRA

12.2(33)SRA

12.2(33)SRA

12.2(33)SRB1

SPA-1XOC48POS/RPR SPA

12.2(33)SRA

12.2(33)SRA

12.2(33)SRA

SPA-2XOC48POS/RPR SPA

12.2(33)SRA

12.2(33)SRA

12.2(33)SRA

SPA-4XOC48POS/RPR

OL-10362-13

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 15S

65

Supported Hardware

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR

Product ID
(append “=” for spares) SIP Support Product Description

SFP-OC48-SR

SFP-OC48-IR1

SFP-OC48-LR2

ATM SPAs

Product ID
(append “=” for spares) SIP Support Product Description

SPA-2XOC3-ATM

SPA-4XOC3-ATM

SPA-1XOC12-ATM

SPA-1XOC48-ATM

SPA-1xOC3-ATM-V2

7600-SIP-200

2-port OC-3c/STM-1c ATM SPA 12.2(33)SRA

7600-SIP-400

SFP Modules Supported in

SFP-OC3-MM

SFP-OC3-IR1

SFP-OC3-LR1

SFP-OC3-LR2

ONS-SC-OC3-EL

7600-SIP-200

4-port OC-3c/STM-1c ATM SPA 12.2(33)SRA

7600-SIP-400

SFP Modules Supported in

SFP-OC3-MM

SFP-OC3-IR1

SFP-OC3-LR1

SFP-OC3-LR2

ONS-SC-OC3-EL

7600-SIP-400 1-Port OC-12c/STM-4c ATM SPA 12.2(33)SRA

SFP Modules Supported in

SFP-OC12-MM

SFP-OC12-SR

SFP-OC12-IR1

SFP-OC12-LR1

SFP-OC12-LR2

7600-SIP-400 1 port OC-48c/STM-16 ATM SPA 12.2(33)SRA

7600-SIP-200

1-Port Clear Channel OC-3 ATM SPA Version 2 15.0(1)S

7600-SIP-400

SFP Modules Supported in

SFP-OC3-MM 15.0(1)S

SFP-OC3-IR1 15.0(1)S

Minimum
Software Version

12.2(33)SRA

12.2(33)SRA

12.2(33)SRA

Minimum
Software Version

SPA-2XOC3-ATM

12.2(33)SRA

12.2(33)SRA

12.2(33)SRA

12.2(33)SRA

15.0(1)S

SPA-4XOC3-ATM

12.2(33)SRA

12.2(33)SRA

12.2(33)SRA

12.2(33)SRA

15.0(1)S

SPA-1XOC12-ATM SPA

12.2(33)SRA

12.2(33)SRA

12.2(33)SRA

12.2(33)SRA

12.2(33)SRA

SPA-1XOC3-ATM-v2

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 15S

66

OL-10362-13

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR

Supported Hardware

Product ID
(append “=” for spares) SIP Support Product Description

SFP-OC3-LR1 15.0(1)S

SFP-OC3-LR2 15.0(1)S

ONS-SC-155-EL 15.0(1)S

SPA-3xOC3-ATM-V2

7600-SIP-200

3-Port Clear Channel OC-3 ATM SPA Version 2 15.0(1)S

7600-SIP-400

SFP Modules Supported in

SFP-OC3-MM 15.0(1)S

SFP-OC3-IR1 15.0(1)S

SFP-OC3-LR1 15.0(1)S

SFP-OC3-LR2 15.0(1)S

ONS-SC-155-EL 15.0(1)S

SPA-1xOC12-ATM-V2

7600-SIP-200

1-Port Clear Channel OC-12 ATM SPA Version 2 15.0(1)S

7600-SIP-400

SFP Modules Supported in

SFP-OC12-MM 15.0(1)S

SFP-OC12-SR 15.0(1)S

SFP-OC12-1R1 15.0(1)S

SFP-OC12-LR2 15.0(1)S

Minimum
Software Version

SPA-3XOC3-ATM-v2

SPA-1XOC12-ATM-v2

Serial SPAs

Product ID
(append “=” for spares) SIP Support Product Description

SPA-8XCHT1/E1

SPA-2XT3/E3

SPA-4XT3/E3

SPA-2XCT3/DS0

SPA-4XCT3/DS0

SPA-1XCHSTM1/OC3

7600-SIP-200 8-Port Channelized T1/E1 SPA 12.2(33)SRA

7600-SIP-400 12.2(33)SRC

7600-SIP-200 2-port Clear Channel T3/E3 SPA 12.2(33)SRA

7600-SIP-400 12.2(33)SRC

7600-SIP-200 4-port Clear Channel T3/E3 SPA 12.2(33)SRA

7600-SIP-400 12.2(33)SRC

7600-SIP-200 2-port Channelized T3 to DS0 SPA 12.2(33)SRA

7600-SIP-400 12.2(33)SRC

7600-SIP-200 4-port Channelized T3 to DS0 SPA 12.2(33)SRA

7600-SIP-400 12.2(33)SRC

7600-SIP-200 1-port Channelized STM1/OC3 to DS0 SPA 12.2(33)SRA

7600-SIP-400 12.2(33)SRC

SFP Modules Supported in SPA-1XCHSTM1/OC3 on 7600-SIP-400

Minimum
Software Version

OL-10362-13

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 15S

67

Supported Hardware

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR

Product ID
(append “=” for spares) SIP Support Product Description

ONS-SC-155-EL

SFP-OC3-LR1

SPA-4XT-Serial SPA

7600-SIP-200 4-Port Serial Interface SPA 12.2(33)SRC1

Minimum
Software Version

12.2(33)SRD2

12.2(33)SRD2

Circuit Emulation over Packet (CEoP) SPAs

Product ID
(append “=” for spares) SIP Support Product Description

SPA-2CHT3-CE-ATM

Note The SPA-2CHT3-CE-ATM does not use SFPs, use a Telco connector with a Y cable to connect to a patch panel.

SPA-1CHOC3-CE-ATM

SPA-24CHT1-CE-ATM

Note The SPA-24CHT1-CE-ATM does not use SFPs, use a Telco connector with a Y cable to connect to a patch panel.

7600-SIP-400 2-Port Channelized T3/E3 ATM CEoP SPA 12.2(33)SRC

7600-SIP-400 1-Port Channelized OC-3 STM1 ATM CEoP SPA 12.2(33)SRB

SFP Modules Supported in SPA-1XCHOC3-CE

SFP-OC3-MM

SFP-OC3-IR1

SFP-OC3-LR1

SFP-OC3-LR2

SFP-OC3-SR

ONS-SC-155-EL

7600-SIP-400 24-Port Channelized T1/E1/J1 ATM CEoP SPA 12.2(33)SRB

Minimum
Software Version

12.2(33)SRB

12.2(33)SRB

12.2(33)SRB

12.2(33)SRB

12.2(33)SRB

12.2(33)SRD2

Services SPA Carrier (SSC)

Product ID

(append “=” for spares)

7600-SSC-400

Note

7600-SSC-400 does not maintain state when an NSF with SSO redundancy mode switchover occurs.

•

• ES20 and ES+ cards are compatible with 7600-SSC-400 and SPA-IPSEC-2G and it's supported only from Cisco IOS

Release 12.2(33)SRE release onwards.

• RSP720-3C-10GE/RSP720-3CXL-10GE supports the 7600-SSC-400 from Cisco IOS Release 12.2(33)SRE onwards.

• Supervisor Engine 720 and Supervisor Engine 32 support the 7600-SSC-400 beginning with Cisco IOS Release

12.2(33)SRA .

• Route Switch Processor 720-1GE supports the 7600-SSC-400 beginning with Cisco IOS Release 12.2(33)SRC .

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 15S

68

Power
Required Product Description

Minimum
Software Version

5.43 A@42 V Services SPA Carrier (SSC) 12.2(33)SRA

OL-10362-13

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR

Services SPAs

Supported Hardware

Product ID
(append “=” for spares) Carrier Product Description

SPA-IPSEC-2G

• The SPA-IPSEC-2G supports the Route Switch Processor 720 beginning with Cisco IOS Release 12.2(33)SRC.

• ES20 and ES+ cards are compatible with 7600-SSC-400 and SPA-IPSEC-2G and it's supported only from Cisco IOS

7600-SSC-400 IPSec SPA 12.2(33)SRA

Minimum
Software Version

Release 12.2(33)SRE release onwards.

• RSP720-3C-10GE/RSP720-3CXL-10GE supports the 7600-SSC-400 from Cisco IOS Release 12.2(33)SRE onwards.

Enhanced FlexWAN Module

Product ID

(append “=” for spares)

WS-X6582-2PA

Note See the Release Notes for Cisco IOS Release 12.2SR on the Cisco 7600 Series Routers for information about

additional procedures required to support WS-X6582-2PA with Cisco IOS Release 12.2(33)SRA and later releases.

Power
Required Product Description

2.50 A@42 V Enhanced FlexWAN Module; CEF256

With Supervisor Engine 720 12.2(33)SRA

With Supervisor Engine 32 12.2(33)SRA

Minimum
Software Version

Enhanced FlexWAN Module Port Adapters

Product ID
(append “=” for spares) Product Description

PA-2FE-TX, -FX

PA-1FE-TX, -FX

PA-POS-1OC3

PA-POS-2OC3

SFPs for PA-POS-2OC3

SFP-OC3-MM

SFP-OC3-IR1

SFP-OC3-LR1

PA-A6-OC3MM

PA-A6-OC3SMI

PA-A6-OC3SML

PA- A6-T3

PA- A6-E3

2-port Fast Ethernet port adapter (supported only in WS-X6582-2PA) 12.2(33)SRA

1-port Fast Ethernet port adapter (supported only in WS-X6582-2PA) 12.2(33)SRA

1-port Packet over SONET OC3c/STM1 port adapter 12.2(33)SRA

2-port POS OC3c/STM1 port adapter 12.2(33)SRA

Short range, multimode fiber 12.2(33)SRA

Intermediate range, single-mode fiber 12.2(33)SRA

Long range, single-mode fiber 12.2(33)SRA

1-port ATM OC-3c/STM-1 multimode port adapter, enhanced 12.2(33)SRA

1-port ATM OC-3c/STM-1 single-mode (IR) port adapter, enhanced 12.2(33)SRA

1-port ATM OC-3c/STM-1 single-mode (LR) port adapter, enhanced 12.2(33)SRA

1-port ATM DS3 port adapter, enhanced 12.2(33)SRA

1-port ATM E3 port adapter, enhanced 12.2(33)SRA

Minimum
Software Version

OL-10362-13

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 15S

69

Supported Hardware

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR

Product ID
(append “=” for spares) Product Description

PA-POS-OC3MM
PA-POS-OC3SMI
PA-POS-OC3SML

PA-A3-OC3MM
PA-A3-OC3SMI
PA- A3-T3
PA-A3-OC3SML
PA- A3-E3
PA-A3-8T1IMA
PA-A3-8E1IMA

PA- T3
PA- T3+
PA- 2T3
PA- 2T3+
PA- E3
PA- 2E3
PA- MC-T3
PA- MC-E3
PA-MC-2T3+

PA- 4T+
PA- 8T-V3 5
PA- 8T-X2 1
PA-8T-232
PA-MC-2E1/120
PA- MC-8T 1
PA-MC-8E1/120
PA- MC-2T 1
PA- MC-4T 1

PA- 4E1G/ 75
PA-4E1G/120

PA- MC-8T E1+

PA- H
PA- 2H

PA-MC-STM-1

Packet over SONET (OC-3) port adapters 12.2(33)SRA

ATM with traffic shaping port adapters 12.2(33)SRA

T3/E3 (clear-channel and channelized) port adapters 12.2(33)SRA

T1/E1 port adapters 12.2(33)SRA

T1/E1 port adapters 12.2(33)SRA

Multichannel T1/E1 8PRI port adapters 12.2(33)SRA

HSSI port adapters 12.2(33)SRA

Multichannel STM-1 port adapters 12.2(33)SRA

Minimum
Software Version

Ethernet Services 20G Line Cards

Product ID

(append “=” for spares)

7600-ES20-GE3C

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 15S

70

Power
Required Product Description

8.1 A@42 V Cisco 7600 ES20 line card, 20xGE SFP with DFC 3C

Minimum
Software Version

With Supervisor Engine 720 12.2(33)SRB

With RSP 720 12.2(33)SRB

SFPs Supported

GLC-BX-D 12.2(33)SRD

GLC-BX-U 12.2(33)SRD

OL-10362-13

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR

Supported Hardware

Product ID

(append “=” for spares)

Power
Required Product Description

GLC-GE-100FX 15.0(1)S

SFP-GE-S 12.2(33)SRB

SFP-GE-L 12.2(33)SRB

SFP-GE-Z 12.2(33)SRB

SFP-GE-T 12.2(33)SRB3

CWDM-SFP-1470= 12.2(33)SRB3

CWDM-SFP-1490= 12.2(33)SRB3

CWDM-SFP-1510= 12.2(33)SRB3

CWDM-SFP-1530= 12.2(33)SRB3

CWDM-SFP-1550= 12.2(33)SRB3

CWDM-SFP-1570= 12.2(33)SRB3

CWDM-SFP-1590= 12.2(33)SRB3

CWDM-SFP-1610= 12.2(33)SRB3

DWDM-SFP-3033

DWDM-SFP-3112

DWDM-SFP-3190

DWDM-SFP-3268

DWDM-SFP-3425

DWDM-SFP-3504

DWDM-SFP-3582

DWDM-SFP-3661

DWDM-SFP-3819

DWDM-SFP-3898

DWDM-SFP-3977

DWDM-SFP-4056

DWDM-SFP-4214

DWDM-SFP-4294

DWDM-SFP-4373

DWDM-SFP-4453

DWDM-SFP-4612

DWDM-SFP-4692

DWDM-SFP-4772

DWDM-SFP-4851

DWDM-SFP-5012

DWDM-SFP-5092

DWDM-SFP-5172

DWDM-SFP-5252

Minimum
Software Version

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

OL-10362-13

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 15S

71

Supported Hardware

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR

Product ID

(append “=” for spares)

7600-ES20-GE3CXL

Power
Required Product Description

DWDM-SFP-5413= 12.2(33)SRD

DWDM-SFP-5494

DWDM-SFP-5575

DWDM-SFP-5655

DWDM-SFP-5817

DWDM-SFP-5898

DWDM-SFP-5979

DWDM-SFP-6061

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

DWDM-SFP-3346= 12.2(33)SRE

DWDM-SFP-3739= 12.2(33)SRE

DWDM-SFP-4134= 12.2(33)SRE

DWDM-SFP-4532= 12.2(33)SRE

DWDM-SFP-4931= 12.2(33)SRE

DWDM-SFP-5332= 12.2(33)SRE

DWDM-SFP-5736= 12.2(33)SRE

DWDM-SFP-6141= 12.2(33)SRE

8.1 A@42 V Cisco 7600 ES20 line card, 20xGE SFP with DFC 3CXL

With Supervisor Engine 720 12.2(33)SRB

With RSP 720 12.2(33)SRB

SFPs Supported

GLC-BX-D 12.2(33)SRD

GLC-BX-U 12.2(33)SRD

GLC-GE-100FX 15.0(1)S

SFP-GE-S 12.2(33)SRB

SFP-GE-L 12.2(33)SRB

SFP-GE-Z 12.2(33)SRB

SFP-GE-T 12.2(33)SRB3

CWDM-SFP-1470= 12.2(33)SRB3

CWDM-SFP-1490= 12.2(33)SRB3

CWDM-SFP-1510= 12.2(33)SRB3

CWDM-SFP-1530= 12.2(33)SRB3

CWDM-SFP-1550= 12.2(33)SRB3

CWDM-SFP-1570= 12.2(33)SRB3

CWDM-SFP-1590= 12.2(33)SRB3

CWDM-SFP-1610= 12.2(33)SRB3

DWDM-SFP-3033

DWDM-SFP-3112

= 12.2(33)SRD

= 12.2(33)SRD

Minimum
Software Version

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 15S

72

OL-10362-13

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR

Supported Hardware

Product ID

(append “=” for spares)

Power
Required Product Description

DWDM-SFP-3190= 12.2(33)SRD

DWDM-SFP-3268

DWDM-SFP-3425

DWDM-SFP-3504

DWDM-SFP-3582

DWDM-SFP-3661

DWDM-SFP-3819

DWDM-SFP-3898

DWDM-SFP-3977

DWDM-SFP-4056

DWDM-SFP-4214

DWDM-SFP-4294

DWDM-SFP-4373

DWDM-SFP-4453

DWDM-SFP-4612

DWDM-SFP-4692

DWDM-SFP-4772

DWDM-SFP-4851

DWDM-SFP-5012

DWDM-SFP-5092

DWDM-SFP-5172

DWDM-SFP-5252

DWDM-SFP-5413

DWDM-SFP-5494

DWDM-SFP-5575

DWDM-SFP-5655

DWDM-SFP-5817

DWDM-SFP-5898

DWDM-SFP-5979

DWDM-SFP-6061 12.2(33)SRD

DWDM-SFP-3346= 12.2(33)SRE

DWDM-SFP-3739= 12.2(33)SRE

DWDM-SFP-4134= 12.2(33)SRE

DWDM-SFP-4532= 12.2(33)SRE

DWDM-SFP-4931= 12.2(33)SRE

DWDM-SFP-5332= 12.2(33)SRE

DWDM-SFP-5736= 12.2(33)SRE

Minimum
Software Version

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

OL-10362-13

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 15S

73

Supported Hardware

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR

Product ID

(append “=” for spares)

7600-ES20-10G3C

Power
Required Product Description

DWDM-SFP-6141= 12.2(33)SRE

8.1 A@42 V Cisco 7600 ES20 line card, 2x10GE XFP with DFC 3C

With Supervisor Engine 720 12.2(33)SRB

With RSP 720 12.2(33)SRB

XFPs Supported

XFP-10GER-192IR+

= 12.2(33)SRD

XFP-10GLR-OC192SR 12.2(33)SRB

XFP-10GER-OC192IR 12.2(33)SRB

XFP-10GZR-OC192LR 12.2(33)SRB1

DWDM-XFP-30.33

DWDM-XFP-31.12

DWDM-XFP-31.90

DWDM- XFP-32.68

DWDM-XFP-34.25

DWDM-XFP-35.04

DWDM-XFP-35.82

DWDM- XFP-36.61

DWDM-XFP-38.19

DWDM-XFP-38.98

DWDM-XFP-39.77

DWDM- XFP-40.56

DWDM-XFP-42.14

DWDM-XFP-42.94

DWDM-XFP-43.73

DWDM- XFP-44.53

DWDM-XFP-46.12

DWDM-XFP-46.92

DWDM-XFP-47.72

DWDM- XFP-48.51

DWDM-XFP-50.12

DWDM-XFP-50.92

DWDM-XFP-51.72

DWDM-XFP-52.52

DWDM- XFP-54.13

DWDM-XFP-54.94

DWDM-XFP-55.75

DWDM-XFP-56.55

= 12.2(33)SRB3

= 12.2(33)SRB3

= 12.2(33)SRB3

= 12.2(33)SRB3

= 12.2(33)SRB3

= 12.2(33)SRB3

= 12.2(33)SRB3

= 12.2(33)SRB3

= 12.2(33)SRB3

= 12.2(33)SRB3

= 12.2(33)SRB3

= 12.2(33)SRB3

= 12.2(33)SRB3

= 12.2(33)SRB3

= 12.2(33)SRB3

= 12.2(33)SRB3

= 12.2(33)SRB3

= 12.2(33)SRB3

= 12.2(33)SRB3

= 12.2(33)SRB3

= 12.2(33)SRB3

= 12.2(33)SRB3

= 12.2(33)SRB3

= 12.2(33)SRB3

= 12.2(33)SRB3

= 12.2(33)SRB3

= 12.2(33)SRB3

= 12.2(33)SRB3

Minimum
Software Version

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 15S

74

OL-10362-13

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR

Supported Hardware

Product ID

(append “=” for spares)

7600-ES20-10G3CXL

Power
Required Product Description

DWDM- XFP-58.17= 12.2(33)SRB3

DWDM-XFP-58.98

DWDM-XFP-59.79

DWDM- XFP-60.61

= 12.2(33)SRB3

= 12.2(33)SRB3

= 12.2(33)SRB3

8.1 A@42 V Cisco 7600 ES20 line card, 2x10GE XFP with DFC 3CXL

With Supervisor Engine 720 12.2(33)SRB

With RSP 720 12.2(33)SRB

XFPs Supported

XFP-10GER-192IR+ 12.2(33)SRD

XFP-10GLR-OC192SR 12.2(33)SRB

XFP-10GER-OC192IR+

= 12.2(33)SRB

XFP-10GZR-OC192LR 12.2(33)SRB1

DWDM-XFP-30.33

DWDM-XFP-31.12

DWDM-XFP-31.90

DWDM- XFP-32.68

DWDM-XFP-34.25

DWDM-XFP-35.04

DWDM-XFP-35.82

DWDM- XFP-36.61

DWDM-XFP-38.19

DWDM-XFP-38.98

DWDM-XFP-39.77

DWDM- XFP-40.56

DWDM-XFP-42.14

DWDM-XFP-42.94

DWDM-XFP-43.73

DWDM- XFP-44.53

DWDM-XFP-46.12

DWDM-XFP-46.92

DWDM-XFP-47.72

DWDM- XFP-48.51

DWDM-XFP-50.12

DWDM-XFP-50.92

DWDM-XFP-51.72

DWDM-XFP-52.52

DWDM- XFP-54.13

= 12.2(33)SRB3

= 12.2(33)SRB3

= 12.2(33)SRB3

= 12.2(33)SRB3

= 12.2(33)SRB3

= 12.2(33)SRB3

= 12.2(33)SRB3

= 12.2(33)SRB3

= 12.2(33)SRB3

= 12.2(33)SRB3

= 12.2(33)SRB3

= 12.2(33)SRB3

= 12.2(33)SRB3

= 12.2(33)SRB3

= 12.2(33)SRB3

= 12.2(33)SRB3

= 12.2(33)SRB3

= 12.2(33)SRB3

= 12.2(33)SRB3

= 12.2(33)SRB3

= 12.2(33)SRB3

= 12.2(33)SRB3

= 12.2(33)SRB3

= 12.2(33)SRB3

= 12.2(33)SRB3

Minimum
Software Version

OL-10362-13

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 15S

75

Supported Hardware

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR

Product ID

(append “=” for spares)

Power
Required Product Description

Minimum
Software Version

DWDM-XFP-54.94= 12.2(33)SRB3

DWDM-XFP-55.75

DWDM-XFP-56.55

DWDM- XFP-58.17

DWDM-XFP-58.98

DWDM-XFP-59.79

DWDM- XFP-60.61

Note The Ethernet Services 20G line cards support all Cisco 7600 series routers except for the Cisco 7603 router

= 12.2(33)SRB3

= 12.2(33)SRB3

= 12.2(33)SRB3

= 12.2(33)SRB3

= 12.2(33)SRB3

= 12.2(33)SRB3

Ethernet Services 40G Line Cards

Product ID

(append “=” for spares)

7600-ES+20G3C

Power
Required Product Description

6.58 A

7600 ES+ Line Card, 20xGE SFP with DFC 3C

@42 V

Minimum
Software Version

With Supervisor Engine 720 12.2(33)SRD

With RSP 720 12.2(33)SRD

SFPs Supported

SFP-GE-S 12.2(33)SRD

SFP-GE-L 12.2(33)SRD

SFP-GE-Z 12.2(33)SRD

SFP-GE-T 12.2(33)SRD

GLC-BX-D 12.2(33)SRD

GLC-BX-U 12.2(33)SRD

GLC-GE-100FX 15.0(1)S

CWDM-SFP-1470

CWDM-SFP-1490

CWDM-SFP-1510

CWDM-SFP-1530

CWDM-SFP-1550

CWDM-SFP-1570

CWDM-SFP-1590

CWDM-SFP-1610

DWDM-SFP-3033

DWDM-SFP-3112

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 15S

76

OL-10362-13

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR

Supported Hardware

Product ID

(append “=” for spares)

Power
Required Product Description

DWDM-SFP-3190= 12.2(33)SRD

DWDM-SFP-3268

DWDM-SFP-3425

DWDM-SFP-3504

DWDM-SFP-3582

DWDM-SFP-3661

DWDM-SFP-3819

DWDM-SFP-3898

DWDM-SFP-3977

DWDM-SFP-4056

DWDM-SFP-4214

DWDM-SFP-4294

DWDM-SFP-4373

DWDM-SFP-4453

DWDM-SFP-4612

DWDM-SFP-4692

DWDM-SFP-4772

DWDM-SFP-4851

DWDM-SFP-5012

DWDM-SFP-5092

DWDM-SFP-5172

DWDM-SFP-5252

DWDM-SFP-5413

DWDM-SFP-5494

DWDM-SFP-5575

DWDM-SFP-5655

DWDM-SFP-5817

DWDM-SFP-5898

DWDM-SFP-5979

DWDM-SFP-6061

DWDM-SFP-3346= 12.2(33)SRE

DWDM-SFP-3739= 12.2(33)SRE

DWDM-SFP-4134= 12.2(33)SRE

DWDM-SFP-4532= 12.2(33)SRE

DWDM-SFP-4931= 12.2(33)SRE

DWDM-SFP-5332= 12.2(33)SRE

DWDM-SFP-5736= 12.2(33)SRE

Minimum
Software Version

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

OL-10362-13

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 15S

77

Supported Hardware

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR

Product ID

(append “=” for spares)

7600-ES+20G3CXL

Power
Required Product Description

DWDM-SFP-6141= 12.2(33)SRE

7.25A@42 V 7600 ES+ Line Card, 20xGE SFP with DFC 3CXL

With Supervisor Engine 720 12.2(33)SRD

With RSP 720 12.2(33)SRD

SFPs Supported

SFP-GE-S 12.2(33)SRD

SFP-GE-L 12.2(33)SRD

SFP-GE-Z 12.2(33)SRD

SFP-GE-T 12.2(33)SRD

GLC-BX-D 12.2(33)SRD

GLC-BX-U 12.2(33)SRD

GLC-GE-100FX 15.0(1)S

CWDM-SFP-1470

CWDM-SFP-1490

CWDM-SFP-1510

CWDM-SFP-1530

CWDM-SFP-1550

CWDM-SFP-1570

CWDM-SFP-1590

CWDM-SFP-1610

DWDM-SFP-3033

DWDM-SFP-3112

DWDM-SFP-3190

DWDM-SFP-3268

DWDM-SFP-3425

DWDM-SFP-3504

DWDM-SFP-3582

DWDM-SFP-3661

DWDM-SFP-3819

DWDM-SFP-3898

DWDM-SFP-3977

DWDM-SFP-4056

DWDM-SFP-4214

DWDM-SFP-4294

DWDM-SFP-4373

DWDM-SFP-4453

DWDM-SFP-4612

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

Minimum
Software Version

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 15S

78

OL-10362-13

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR

Supported Hardware

Product ID

(append “=” for spares)

7600-ES+2TG3C

Power
Required Product Description

DWDM-SFP-4692= 12.2(33)SRD

DWDM-SFP-4772

DWDM-SFP-4851

DWDM-SFP-5012

DWDM-SFP-5092

DWDM-SFP-5172

DWDM-SFP-5252

DWDM-SFP-5413

DWDM-SFP-5494

DWDM-SFP-5575

DWDM-SFP-5655

DWDM-SFP-5817

DWDM-SFP-5898

DWDM-SFP-5979

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

DWDM-SFP-3346= 12.2(33)SRE

DWDM-SFP-3739= 12.2(33)SRE

DWDM-SFP-4134= 12.2(33)SRE

DWDM-SFP-4532= 12.2(33)SRE

DWDM-SFP-4931= 12.2(33)SRE

DWDM-SFP-5332= 12.2(33)SRE

DWDM-SFP-5736= 12.2(33)SRE

DWDM-SFP-6141= 12.2(33)SRE

6.38 A@42 V 7600 ES+ Line Card, 2x10GE XFP with DFC 3C

With Supervisor Engine 720 12.2(33)SRD

With RSP 720 12.2(33)SRD

XFPs Supported

XFP-10GLR-OC192SR 12.2(33)SRD

XFP-10GZR-OC192LR 12.2(33)SRD

XFP-10GER-192IR+

= 12.2(33)SRD

XFP-10G-MM-SR 12.2(33)SRE1

DWDM-XFP-60.61

DWDM-XFP-59.79

DWDM-XFP-58.98

DWDM-XFP-58.17

DWDM-XFP-56.55

DWDM-XFP-55.75

DWDM-XFP-54.94

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

Minimum
Software Version

OL-10362-13

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 15S

79

Supported Hardware

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR

Product ID

(append “=” for spares)

7600-ES+2TG3CXL

Power
Required Product Description

DWDM-XFP-54.13= 12.2(33)SRD

DWDM-XFP-52.52

DWDM-XFP-51.72

DWDM-XFP-50.92

DWDM-XFP-50.12

DWDM-XFP-48.51

DWDM-XFP-47.72

DWDM-XFP-46.92

DWDM-XFP-46.12

DWDM-XFP-44.53

DWDM-XFP-43.73

DWDM-XFP-42.94

DWDM-XFP-42.14

DWDM-XFP-40.56

DWDM-XFP-39.77

DWDM-XFP-38.98

DWDM-XFP-38.19

DWDM-XFP-36.61

DWDM-XFP-35.82

DWDM-XFP-35.04

DWDM-XFP-34.25

DWDM-XFP-32.68

DWDM-XFP-31.90

DWDM-XFP-31.12

DWDM-XFP-30.33

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

7.06 A@42 V 7600 ES+ Line Card, 2x10GE XFP with DFC 3CXL

With Supervisor Engine 720 12.2(33)SRD

With RSP 720 12.2(33)SRD

XFPs Supported

XFP-10GLR-OC192SR 12.2(33)SRD

XFP-10GZR-OC192LR 12.2(33)SRD

XFP-10GER-192IR+

= 12.2(33)SRD

XFP-10G-MM-SR 12.2(33)SRE1

DWDM-XFP-60.61

DWDM-XFP-59.79

DWDM-XFP-58.98

DWDM-XFP-58.17

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

Minimum
Software Version

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 15S

80

OL-10362-13

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR

Supported Hardware

Product ID

(append “=” for spares)

7600-ES+40G3C

Power
Required Product Description

DWDM-XFP-56.55= 12.2(33)SRD

DWDM-XFP-55.75

DWDM-XFP-54.94

DWDM-XFP-54.13

DWDM-XFP-52.52

DWDM-XFP-51.72

DWDM-XFP-50.92

DWDM-XFP-50.12

DWDM-XFP-48.51

DWDM-XFP-47.72

DWDM-XFP-46.92

DWDM-XFP-46.12

DWDM-XFP-44.53

DWDM-XFP-43.73

DWDM-XFP-42.94

DWDM-XFP-42.14

DWDM-XFP-40.56

DWDM-XFP-39.77

DWDM-XFP-38.98

DWDM-XFP-38.19

DWDM-XFP-36.61

DWDM-XFP-35.82

DWDM-XFP-35.04

DWDM-XFP-34.25

DWDM-XFP-32.68

DWDM-XFP-31.90

DWDM-XFP-31.12

DWDM-XFP-30.33

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

9.3 A@42 V 7600 ES+ Line Card, 40xGE SFP with DFC 3C

With Supervisor Engine 720 12.2(33)SRD

With RSP 720 12.2(33)SRD

SFPs Supported

SFP-GE-S 12.2(33)SRD

SFP-GE-L 12.2(33)SRD

SFP-GE-Z 12.2(33)SRD

SFP-GE-T 12.2(33)SRD

GLC-BX-D 12.2(33)SRD

Minimum
Software Version

OL-10362-13

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 15S

81

Supported Hardware

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR

Product ID

(append “=” for spares)

Power
Required Product Description

GLC-BX-U 12.2(33)SRD

CWDM-SFP-1470

CWDM-SFP-1490

CWDM-SFP-1510

CWDM-SFP-1530

CWDM-SFP-1550

CWDM-SFP-1570

CWDM-SFP-1590

CWDM-SFP-1610

DWDM-SFP-3033

DWDM-SFP-3112

DWDM-SFP-3190

DWDM-SFP-3268

DWDM-SFP-3425

DWDM-SFP-3504

DWDM-SFP-3582

DWDM-SFP-3661

DWDM-SFP-3819

DWDM-SFP-3898

DWDM-SFP-3977

DWDM-SFP-4056

DWDM-SFP-4214

DWDM-SFP-4294

DWDM-SFP-4373

DWDM-SFP-4453

DWDM-SFP-4612

DWDM-SFP-4692

DWDM-SFP-4772

DWDM-SFP-4851

DWDM-SFP-5012

DWDM-SFP-5092

DWDM-SFP-5172

DWDM-SFP-5252

DWDM-SFP-5413

DWDM-SFP-5494

DWDM-SFP-5575

DWDM-SFP-5655

Minimum
Software Version

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 15S

82

OL-10362-13

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR

Supported Hardware

Product ID

(append “=” for spares)

7600-ES+40G3CXL

Power
Required Product Description

DWDM-SFP-5817= 12.2(33)SRD

DWDM-SFP-5898

DWDM-SFP-5979

DWDM-SFP-6061

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

DWDM-SFP-3346= 12.2(33)SRE

DWDM-SFP-3739= 12.2(33)SRE

DWDM-SFP-4134= 12.2(33)SRE

DWDM-SFP-4532= 12.2(33)SRE

DWDM-SFP-4931= 12.2(33)SRE

DWDM-SFP-5332= 12.2(33)SRE

DWDM-SFP-5736= 12.2(33)SRE

DWDM-SFP-6141= 12.2(33)SRE

9.97 A@42 V 7600 ES+ Line Card, 40xGE SFP with DFC 3CXL

With Supervisor Engine 720 12.2(33)SRD

With RSP 720 12.2(33)SRD

SFPs Supported

SFP-GE-S 12.2(33)SRD

SFP-GE-L 12.2(33)SRD

SFP-GE-Z 12.2(33)SRD

SFP-GE-T 12.2(33)SRD

GLC-BX-D 12.2(33)SRD

GLC-BX-U 12.2(33)SRD

CWDM-SFP-1470

CWDM-SFP-1490

CWDM-SFP-1510

CWDM-SFP-1530

CWDM-SFP-1550

CWDM-SFP-1570

CWDM-SFP-1590

CWDM-SFP-1610

DWDM-SFP-3033

DWDM-SFP-3112

DWDM-SFP-3190

DWDM-SFP-3268

DWDM-SFP-3425

DWDM-SFP-3504

DWDM-SFP-3582

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

Minimum
Software Version

OL-10362-13

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 15S

83

Supported Hardware

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR

Product ID

(append “=” for spares)

7600-ES+4TG3C

Power
Required Product Description

DWDM-SFP-3661= 12.2(33)SRD

DWDM-SFP-3819

DWDM-SFP-3898

DWDM-SFP-3977

DWDM-SFP-4056

DWDM-SFP-4214

DWDM-SFP-4294

DWDM-SFP-4373

DWDM-SFP-4453

DWDM-SFP-4612

DWDM-SFP-4692

DWDM-SFP-4772

DWDM-SFP-4851

DWDM-SFP-5012

DWDM-SFP-5092

DWDM-SFP-5172

DWDM-SFP-5252

DWDM-SFP-5413

DWDM-SFP-5494

DWDM-SFP-5575

DWDM-SFP-5655

DWDM-SFP-5817

DWDM-SFP-5898

DWDM-SFP-5979

DWDM-SFP-6061

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

DWDM-SFP-3346= 12.2(33)SRE

DWDM-SFP-3739= 12.2(33)SRE

DWDM-SFP-4134= 12.2(33)SRE

DWDM-SFP-4532= 12.2(33)SRE

DWDM-SFP-4931= 12.2(33)SRE

DWDM-SFP-5332= 12.2(33)SRE

DWDM-SFP-5736= 12.2(33)SRE

DWDM-SFP-6141= 12.2(33)SRE

8.82 A@42 V 7600 ES+ Line Card, 4x10GE XFP with DFC 3C

With Supervisor Engine 720 12.2(33)SRD

With RSP 720 12.2(33)SRD

XFPs Supported

Minimum
Software Version

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 15S

84

OL-10362-13

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR

Supported Hardware

Product ID

(append “=” for spares)

Power
Required Product Description

XFP-10GLR-OC192SR 12.2(33)SRD

XFP-10GZR-OC192LR 12.2(33)SRD

XFP-10GER-192IR+

XFP-10G-MM-SR 12.2(33)SRE1

DWDM-XFP-60.61

DWDM-XFP-59.79

DWDM-XFP-58.98

DWDM-XFP-58.17

DWDM-XFP-56.55

DWDM-XFP-55.75

DWDM-XFP-54.94

DWDM-XFP-54.13

DWDM-XFP-52.52

DWDM-XFP-51.72

DWDM-XFP-50.92

DWDM-XFP-50.12

DWDM-XFP-48.51

DWDM-XFP-47.72

DWDM-XFP-46.92

DWDM-XFP-46.12

DWDM-XFP-44.53

DWDM-XFP-43.73

DWDM-XFP-42.94

DWDM-XFP-42.14

DWDM-XFP-40.56

DWDM-XFP-39.77

DWDM-XFP-38.98

DWDM-XFP-38.19

DWDM-XFP-36.61

DWDM-XFP-35.82

DWDM-XFP-35.04

DWDM-XFP-34.25

DWDM-XFP-32.68

DWDM-XFP-31.90

DWDM-XFP-31.12

DWDM-XFP-30.33

DWDM-XFP-42.14

Minimum
Software Version

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

OL-10362-13

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 15S

85

Supported Hardware

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR

Product ID

(append “=” for spares)

7600-ES+4TG3CXL

Power
Required Product Description

Minimum
Software Version

DWDM-XFP-40.56= 12.2(33)SRD

DWDM-XFP-39.77

DWDM-XFP-38.98

= 12.2(33)SRD

= 12.2(33)SRD

9.49 A@42 V 7600 ES+ Line Card, 4x10GE XFP with DFC 3CXL 12.2(33)SRD

With Supervisor Engine 720 12.2(33)SRD

With RSP 720 12.2(33)SRD

XFPs Supported

XFP-10GLR-OC192SR 12.2(33)SRD

XFP-10GZR-OC192LR 12.2(33)SRD

XFP-10GER-192IR+

= 12.2(33)SRD

XFP-10G-MM-SR 12.2(33)SRE1

DWDM-XFP-60.61

DWDM-XFP-59.79

DWDM-XFP-58.98

DWDM-XFP-58.17

DWDM-XFP-56.55

DWDM-XFP-55.75

DWDM-XFP-54.94

DWDM-XFP-54.13

DWDM-XFP-52.52

DWDM-XFP-51.72

DWDM-XFP-50.92

DWDM-XFP-50.12

DWDM-XFP-48.51

DWDM-XFP-47.72

DWDM-XFP-46.92

DWDM-XFP-46.12

DWDM-XFP-44.53

DWDM-XFP-43.73

DWDM-XFP-42.94

DWDM-XFP-42.14

DWDM-XFP-40.56

DWDM-XFP-39.77

DWDM-XFP-38.98

DWDM-XFP-38.19

DWDM-XFP-36.61

DWDM-XFP-35.82

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 15S

86

OL-10362-13

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR

Supported Hardware

Product ID

(append “=” for spares)

76-ES+XT-2TG3C

Power
Required Product Description

DWDM-XFP-35.04= 12.2(33)SRD

DWDM-XFP-34.25

DWDM-XFP-32.68

DWDM-XFP-31.90

DWDM-XFP-31.12

DWDM-XFP-30.33

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

= 12.2(33)SRD

6.5@42V 7600 ES+XT, LAN/WAN PHY, OTN/G.709, 2x10GE, XFP,
DFC3C

With Supervisor Engine 720 12.2(33)SRD1

With RSP 720 12.2(33)SRD1

XFPs Supported

XFP-10GLR-OC192SR 12.2(33)SRD1

XFP-10GZR-OC192LR 12.2(33)SRD1

XFP-10GER-192IR+

= 12.2(33)SRD1

XFP-10G-MM-SR 12.2(33)SRE1

DWDM-XFP-C 15.0(1)S

DWDM-XFP-60.61

DWDM-XFP-59.79

DWDM-XFP-58.98

DWDM-XFP-58.17

DWDM-XFP-56.55

DWDM-XFP-55.75

DWDM-XFP-54.94

DWDM-XFP-54.13

DWDM-XFP-52.52

DWDM-XFP-51.72

DWDM-XFP-50.92

DWDM-XFP-50.12

DWDM-XFP-48.51

DWDM-XFP-47.72

DWDM-XFP-46.92

DWDM-XFP-46.12

DWDM-XFP-44.53

DWDM-XFP-43.73

DWDM-XFP-42.94

DWDM-XFP-42.14

DWDM-XFP-40.56

= 12.2(33)SRD1

= 12.2(33)SRD1

= 12.2(33)SRD1

= 12.2(33)SRD1

= 12.2(33)SRD1

= 12.2(33)SRD1

= 12.2(33)SRD1

= 12.2(33)SRD1

= 12.2(33)SRD1

= 12.2(33)SRD1

= 12.2(33)SRD1

= 12.2(33)SRD1

= 12.2(33)SRD1

= 12.2(33)SRD1

= 12.2(33)SRD1

= 12.2(33)SRD1

= 12.2(33)SRD1

= 12.2(33)SRD1

= 12.2(33)SRD1

= 12.2(33)SRD1

= 12.2(33)SRD1

Minimum
Software Version

12.2(33)SRD1

OL-10362-13

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 15S

87

Supported Hardware

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR

Product ID

(append “=” for spares)

76-ES+XT-2TG3CXL

Power
Required Product Description

DWDM-XFP-39.77= 12.2(33)SRD1

DWDM-XFP-38.98

DWDM-XFP-38.19

DWDM-XFP-36.61

DWDM-XFP-35.82

DWDM-XFP-35.04

DWDM-XFP-34.25

DWDM-XFP-32.68

DWDM-XFP-31.90

DWDM-XFP-31.12

DWDM-XFP-30.33

= 12.2(33)SRD1

= 12.2(33)SRD1

= 12.2(33)SRD1

= 12.2(33)SRD1

= 12.2(33)SRD1

= 12.2(33)SRD1

= 12.2(33)SRD1

= 12.2(33)SRD1

= 12.2(33)SRD1

= 12.2(33)SRD1

7.16 A@42 V 7600 ES+XT, LAN/WAN PHY, OTN/G.709, 2x10GE, XFP,
DFC3CXL

With Supervisor Engine 720 12.2(33)SRD1

With RSP 720 12.2(33)SRD1

XFPs Supported

XFP-10GLR-OC192SR 12.2(33)SRD1

XFP-10GZR-OC192LR 12.2(33)SRD1

XFP-10GER-192IR+

= 12.2(33)SRD1

XFP-10G-MM-SR 12.2(33)SRE1

DWDM-XFP-C 15.0(1)S

DWDM-XFP-60.61

DWDM-XFP-59.79

DWDM-XFP-58.98

DWDM-XFP-58.17

DWDM-XFP-56.55

DWDM-XFP-55.75

DWDM-XFP-54.94

DWDM-XFP-54.13

DWDM-XFP-52.52

DWDM-XFP-51.72

DWDM-XFP-50.92

DWDM-XFP-50.12

DWDM-XFP-48.51

DWDM-XFP-47.72

DWDM-XFP-46.92

DWDM-XFP-46.12

= 12.2(33)SRD1

= 12.2(33)SRD1

= 12.2(33)SRD1

= 12.2(33)SRD1

= 12.2(33)SRD1

= 12.2(33)SRD1

= 12.2(33)SRD1

= 12.2(33)SRD1

= 12.2(33)SRD1

= 12.2(33)SRD1

= 12.2(33)SRD1

= 12.2(33)SRD1

= 12.2(33)SRD1

= 12.2(33)SRD1

= 12.2(33)SRD1

= 12.2(33)SRD1

Minimum
Software Version

12.2(33)SRD1

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 15S

88

OL-10362-13

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR

Supported Hardware

Product ID

(append “=” for spares)

76-ES+XT-4TG3C

Power
Required Product Description

DWDM-XFP-44.53= 12.2(33)SRD1

DWDM-XFP-43.73

DWDM-XFP-42.94

DWDM-XFP-42.14

DWDM-XFP-40.56

DWDM-XFP-39.77

DWDM-XFP-38.98

DWDM-XFP-38.19

DWDM-XFP-36.61

DWDM-XFP-35.82

DWDM-XFP-35.04

DWDM-XFP-34.25

DWDM-XFP-32.68

DWDM-XFP-31.90

DWDM-XFP-31.12

DWDM-XFP-30.33

= 12.2(33)SRD1

= 12.2(33)SRD1

= 12.2(33)SRD1

= 12.2(33)SRD1

= 12.2(33)SRD1

= 12.2(33)SRD1

= 12.2(33)SRD1

= 12.2(33)SRD1

= 12.2(33)SRD1

= 12.2(33)SRD1

= 12.2(33)SRD1

= 12.2(33)SRD1

= 12.2(33)SRD1

= 12.2(33)SRD1

= 12.2(33)SRD1

9A@42V 7600 ES+XT, LAN/WAN PHY, OTN/G.709, 4x10GE, XFP,

DFC3C

With Supervisor Engine 720 12.2(33)SRD1

With RSP 720 12.2(33)SRD1

XFPs Supported

XFP-10GLR-OC192SR 12.2(33)SRD1

XFP-10GZR-OC192LR 12.2(33)SRD1

XFP-10GER-192IR+

= 12.2(33)SRD1

XFP-10G-MM-SR 12.2(33)SRE1

DWDM-XFP-C 15.0(1)S

DWDM-XFP-60.61

DWDM-XFP-59.79

DWDM-XFP-58.98

DWDM-XFP-58.17

DWDM-XFP-56.55

DWDM-XFP-55.75

DWDM-XFP-54.94

DWDM-XFP-54.13

DWDM-XFP-52.52

DWDM-XFP-51.72

DWDM-XFP-50.92

= 12.2(33)SRD1

= 12.2(33)SRD1

= 12.2(33)SRD1

= 12.2(33)SRD1

= 12.2(33)SRD1

= 12.2(33)SRD1

= 12.2(33)SRD1

= 12.2(33)SRD1

= 12.2(33)SRD1

= 12.2(33)SRD1

= 12.2(33)SRD1

Minimum
Software Version

12.2(33)SRD1

OL-10362-13

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 15S

89

Supported Hardware

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR

Product ID

(append “=” for spares)

76-ES+XT-4TG3CXL

Power
Required Product Description

DWDM-XFP-50.12= 12.2(33)SRD1

DWDM-XFP-48.51

DWDM-XFP-47.72

DWDM-XFP-46.92

DWDM-XFP-46.12

DWDM-XFP-44.53

DWDM-XFP-43.73

DWDM-XFP-42.94

DWDM-XFP-42.14

DWDM-XFP-40.56

DWDM-XFP-39.77

DWDM-XFP-38.98

DWDM-XFP-38.19

DWDM-XFP-36.61

DWDM-XFP-35.82

DWDM-XFP-35.04

DWDM-XFP-34.25

DWDM-XFP-32.68

DWDM-XFP-31.90

DWDM-XFP-31.12

DWDM-XFP-30.33

= 12.2(33)SRD1

= 12.2(33)SRD1

= 12.2(33)SRD1

= 12.2(33)SRD1

= 12.2(33)SRD1

= 12.2(33)SRD1

= 12.2(33)SRD1

= 12.2(33)SRD1

= 12.2(33)SRD1

= 12.2(33)SRD1

= 12.2(33)SRD1

= 12.2(33)SRD1

= 12.2(33)SRD1

= 12.2(33)SRD1

= 12.2(33)SRD1

= 12.2(33)SRD1

= 12.2(33)SRD1

= 12.2(33)SRD1

= 12.2(33)SRD1

= 12.2(33)SRD1

9.66 A@42 V 7600 ES+XT, LAN/WAN PHY, OTN/G.709, 4x10GE, XFP,
DFC3CXL

With Supervisor Engine 720 12.2(33)SRD1

With RSP 720 12.2(33)SRD1

XFPs Supported

XFP-10GLR-OC192SR 12.2(33)SRD1

XFP-10GZR-OC192LR 12.2(33)SRD1

XFP-10GER-192IR+

= 12.2(33)SRD1

XFP-10G-MM-SR 12.2(33)SRE1

DWDM-XFP-C 15.0(1)S

DWDM-XFP-60.61

DWDM-XFP-59.79

DWDM-XFP-58.98

DWDM-XFP-58.17

DWDM-XFP-56.55

DWDM-XFP-55.75

= 12.2(33)SRD1

= 12.2(33)SRD1

= 12.2(33)SRD1

= 12.2(33)SRD1

= 12.2(33)SRD1

= 12.2(33)SRD1

Minimum
Software Version

12.2(33)SRD1

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 15S

90

OL-10362-13

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR

Supported Hardware

Product ID

(append “=” for spares)

Power
Required Product Description

DWDM-XFP-54.94= 12.2(33)SRD1

DWDM-XFP-54.13

DWDM-XFP-52.52

DWDM-XFP-51.72

DWDM-XFP-50.92

DWDM-XFP-50.12

DWDM-XFP-48.51

DWDM-XFP-47.72

DWDM-XFP-46.92

DWDM-XFP-46.12

DWDM-XFP-44.53

DWDM-XFP-43.73

DWDM-XFP-42.94

DWDM-XFP-42.14

DWDM-XFP-40.56

DWDM-XFP-39.77

DWDM-XFP-38.98

DWDM-XFP-38.19

DWDM-XFP-36.61

DWDM-XFP-35.82

DWDM-XFP-35.04

DWDM-XFP-34.25

DWDM-XFP-32.68

DWDM-XFP-31.90

DWDM-XFP-31.12

DWDM-XFP-30.33

Minimum
Software Version

= 12.2(33)SRD1

= 12.2(33)SRD1

= 12.2(33)SRD1

= 12.2(33)SRD1

= 12.2(33)SRD1

= 12.2(33)SRD1

= 12.2(33)SRD1

= 12.2(33)SRD1

= 12.2(33)SRD1

= 12.2(33)SRD1

= 12.2(33)SRD1

= 12.2(33)SRD1

= 12.2(33)SRD1

= 12.2(33)SRD1

= 12.2(33)SRD1

= 12.2(33)SRD1

= 12.2(33)SRD1

= 12.2(33)SRD1

= 12.2(33)SRD1

= 12.2(33)SRD1

= 12.2(33)SRD1

= 12.2(33)SRD1

= 12.2(33)SRD1

= 12.2(33)SRD1

= 12.2(33)SRD1

ES+ Transport line cards start here

76-ES+T-20G

OL-10362-13

7.25A@42 V 20xGE with DFC 3CXL

With Supervisor Engine 720 12.2(33)SRD4

With RSP 720 12.2(33)SRD4

SFPs Supported

SFP-GE-S 12.2(33)SRD4

SFP-GE-L 12.2(33)SRD4

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 15S

91

Supported Hardware

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR

SFP-GE-Z 12.2(33)SRD4

SFP-GE-T 12.2(33)SRD4

GLC-BX-D 12.2(33)SRD4

GLC-BX-U 12.2(33)SRD4

GLC-GE-100FX 15.0(1)S

CWDM-SFP-1470

CWDM-SFP-1490

CWDM-SFP-1510

CWDM-SFP-1530

CWDM-SFP-1550

CWDM-SFP-1570

CWDM-SFP-1590

CWDM-SFP-1610

DWDM-SFP-3033

DWDM-SFP-3112

DWDM-SFP-3190

DWDM-SFP-3268

DWDM-SFP-3425

DWDM-SFP-3504

DWDM-SFP-3582

DWDM-SFP-3661

DWDM-SFP-3819

DWDM-SFP-3898

DWDM-SFP-3977

DWDM-SFP-4056

DWDM-SFP-4214

DWDM-SFP-4294

DWDM-SFP-4373

DWDM-SFP-4453

DWDM-SFP-4612

DWDM-SFP-4692

DWDM-SFP-4772

DWDM-SFP-4851

DWDM-SFP-5012

DWDM-SFP-5092

DWDM-SFP-5172

DWDM-SFP-5252

DWDM-SFP-5413

= 12.2(33)SRD4

= 12.2(33)SRD4

= 12.2(33)SRD4

= 12.2(33)SRD4

= 12.2(33)SRD4

= 12.2(33)SRD4

= 12.2(33)SRD4

= 12.2(33)SRD4

= 12.2(33)SRD4

= 12.2(33)SRD4

= 12.2(33)SRD4

= 12.2(33)SRD4

= 12.2(33)SRD4

= 12.2(33)SRD4

= 12.2(33)SRD4

= 12.2(33)SRD4

= 12.2(33)SRD4

= 12.2(33)SRD4

= 12.2(33)SRD4

= 12.2(33)SRD4

= 12.2(33)SRD4

= 12.2(33)SRD4

= 12.2(33)SRD4

= 12.2(33)SRD4

= 12.2(33)SRD4

= 12.2(33)SRD4

= 12.2(33)SRD4

= 12.2(33)SRD4

= 12.2(33)SRD4

= 12.2(33)SRD4

= 12.2(33)SRD4

= 12.2(33)SRD4

= 12.2(33)SRD4

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 15S

92

OL-10362-13

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR

DWDM-SFP-5494= 12.2(33)SRD4

DWDM-SFP-5575

DWDM-SFP-5655

DWDM-SFP-5817

DWDM-SFP-5898

DWDM-SFP-5979

DWDM-SFP-6061

DWDM-SFP-3346= 12.2(33)SRE

DWDM-SFP-3739= 12.2(33)SRE

DWDM-SFP-4134= 12.2(33)SRE

DWDM-SFP-4532= 12.2(33)SRE

DWDM-SFP-4931= 12.2(33)SRE

DWDM-SFP-5332= 12.2(33)SRE

DWDM-SFP-5736= 12.2(33)SRE

DWDM-SFP-6141= 12.2(33)SRE

76-ES+T-40G

9.97 A@42 V 40xGE with DFC 3CXL

With Supervisor Engine 720 12.2(33)SRD4

With RSP 720 12.2(33)SRD4

SFPs Supported

SFP-GE-S 12.2(33)SRD4

SFP-GE-L 12.2(33)SRD4

SFP-GE-Z 12.2(33)SRD4

SFP-GE-T 12.2(33)SRD4

GLC-BX-D 12.2(33)SRD4

GLC-BX-U 12.2(33)SRD4

CWDM-SFP-1470

CWDM-SFP-1490

CWDM-SFP-1510

CWDM-SFP-1530

CWDM-SFP-1550

CWDM-SFP-1570

CWDM-SFP-1590

CWDM-SFP-1610

DWDM-SFP-3033

DWDM-SFP-3112

DWDM-SFP-3190

DWDM-SFP-3268

DWDM-SFP-3425

Supported Hardware

= 12.2(33)SRD4

= 12.2(33)SRD4

= 12.2(33)SRD4

= 12.2(33)SRD4

= 12.2(33)SRD4

= 12.2(33)SRD4

= 12.2(33)SRD4

= 12.2(33)SRD4

= 12.2(33)SRD4

= 12.2(33)SRD4

= 12.2(33)SRD4

= 12.2(33)SRD4

= 12.2(33)SRD4

= 12.2(33)SRD4

= 12.2(33)SRD4

= 12.2(33)SRD4

= 12.2(33)SRD4

= 12.2(33)SRD4

= 12.2(33)SRD4

OL-10362-13

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 15S

93

Supported Hardware

76-ES+T-2TG

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR

DWDM-SFP-3504= 12.2(33)SRD4

DWDM-SFP-3582

DWDM-SFP-3661

DWDM-SFP-3819

DWDM-SFP-3898

DWDM-SFP-3977

DWDM-SFP-4056

DWDM-SFP-4214

DWDM-SFP-4294

DWDM-SFP-4373

DWDM-SFP-4453

DWDM-SFP-4612

DWDM-SFP-4692

DWDM-SFP-4772

DWDM-SFP-4851

DWDM-SFP-5012

DWDM-SFP-5092

DWDM-SFP-5172

DWDM-SFP-5252

DWDM-SFP-5413

DWDM-SFP-5494

DWDM-SFP-5575

DWDM-SFP-5655

DWDM-SFP-5817

DWDM-SFP-5898

DWDM-SFP-5979

DWDM-SFP-6061

DWDM-SFP-3346= 12.2(33)SRE

DWDM-SFP-3739= 12.2(33)SRE

DWDM-SFP-4134= 12.2(33)SRE

DWDM-SFP-4532= 12.2(33)SRE

DWDM-SFP-4931= 12.2(33)SRE

DWDM-SFP-5332= 12.2(33)SRE

DWDM-SFP-5736= 12.2(33)SRE

DWDM-SFP-6141= 12.2(33)SRE

7.16 A@42 V 2x10GE with DFC 3CXL 12.2(33)SRD4

With Supervisor Engine 720 12.2(33)SRD4

With RSP 720 12.2(33)SRD4

= 12.2(33)SRD4

= 12.2(33)SRD4

= 12.2(33)SRD4

= 12.2(33)SRD4

= 12.2(33)SRD4

= 12.2(33)SRD4

= 12.2(33)SRD4

= 12.2(33)SRD4

= 12.2(33)SRD4

= 12.2(33)SRD4

= 12.2(33)SRD4

= 12.2(33)SRD4

= 12.2(33)SRD4

= 12.2(33)SRD4

= 12.2(33)SRD4

= 12.2(33)SRD4

= 12.2(33)SRD4

= 12.2(33)SRD4

= 12.2(33)SRD4

= 12.2(33)SRD4

= 12.2(33)SRD4

= 12.2(33)SRD4

= 12.2(33)SRD4

= 12.2(33)SRD4

= 12.2(33)SRD4

= 12.2(33)SRD4

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 15S

94

OL-10362-13

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR

XFPs Supported

XFP-10GLR-OC192SR 12.2(33)SRD4

XFP-10GZR-OC192LR 12.2(33)SRD4

XFP-10GER-192IR+

DWDM-XFP-C 15.0(1)S

DWDM-XFP-60.61

DWDM-XFP-59.79

DWDM-XFP-58.98

DWDM-XFP-58.17

DWDM-XFP-56.55

DWDM-XFP-55.75

DWDM-XFP-54.94

DWDM-XFP-54.13

DWDM-XFP-52.52

DWDM-XFP-51.72

DWDM-XFP-50.92

DWDM-XFP-50.12

DWDM-XFP-48.51

DWDM-XFP-47.72

DWDM-XFP-46.92

DWDM-XFP-46.12

DWDM-XFP-44.53

DWDM-XFP-43.73

DWDM-XFP-42.94

DWDM-XFP-42.14

DWDM-XFP-40.56

DWDM-XFP-39.77

DWDM-XFP-38.98

DWDM-XFP-38.19

DWDM-XFP-36.61

DWDM-XFP-35.82

DWDM-XFP-35.04

DWDM-XFP-34.25

DWDM-XFP-32.68

DWDM-XFP-31.90

DWDM-XFP-31.12

DWDM-XFP-30.33

76-ES+T-4TG

9.66 A@42 V 4x10GE with DFC 3CXL 12.2(33)SRD4

Supported Hardware

= 12.2(33)SRD4

= 12.2(33)SRD4

= 12.2(33)SRD4

= 12.2(33)SRD4

= 12.2(33)SRD4

= 12.2(33)SRD4

= 12.2(33)SRD4

= 12.2(33)SRD4

= 12.2(33)SRD4

= 12.2(33)SRD4

= 12.2(33)SRD4

= 12.2(33)SRD4

= 12.2(33)SRD4

= 12.2(33)SRD4

= 12.2(33)SRD4

= 12.2(33)SRD4

= 12.2(33)SRD4

= 12.2(33)SRD4

= 12.2(33)SRD4

= 12.2(33)SRD4

= 12.2(33)SRD4

= 12.2(33)SRD4

= 12.2(33)SRD4

= 12.2(33)SRD4

= 12.2(33)SRD4

= 12.2(33)SRD4

= 12.2(33)SRD4

= 12.2(33)SRD4

= 12.2(33)SRD4

= 12.2(33)SRD4

= 12.2(33)SRD4

= 12.2(33)SRD4

= 12.2(33)SRD4

OL-10362-13

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 15S

95

Supported Hardware

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR

With Supervisor Engine 720 12.2(33)SRD4

With RSP 720 12.2(33)SRD4

XFPs Supported

XFP-10GLR-OC192SR 12.2(33)SRD4

XFP-10GZR-OC192LR 12.2(33)SRD4

XFP-10GER-192IR+

DWDM-XFP-C 15.0(1)S

DWDM-XFP-60.61

DWDM-XFP-59.79

DWDM-XFP-58.98

DWDM-XFP-58.17

DWDM-XFP-56.55

DWDM-XFP-55.75

DWDM-XFP-54.94

DWDM-XFP-54.13

DWDM-XFP-52.52

DWDM-XFP-51.72

DWDM-XFP-50.92

DWDM-XFP-50.12

DWDM-XFP-48.51

DWDM-XFP-47.72

DWDM-XFP-46.92

DWDM-XFP-46.12

DWDM-XFP-44.53

DWDM-XFP-43.73

DWDM-XFP-42.94

DWDM-XFP-42.14

DWDM-XFP-40.56

DWDM-XFP-39.77

DWDM-XFP-38.98

DWDM-XFP-38.19

DWDM-XFP-36.61

DWDM-XFP-35.82

DWDM-XFP-35.04

DWDM-XFP-34.25

DWDM-XFP-32.68

DWDM-XFP-31.90

= 12.2(33)SRD4

= 12.2(33)SRD4

= 12.2(33)SRD4

= 12.2(33)SRD4

= 12.2(33)SRD4

= 12.2(33)SRD4

= 12.2(33)SRD4

= 12.2(33)SRD4

= 12.2(33)SRD4

= 12.2(33)SRD4

= 12.2(33)SRD4

= 12.2(33)SRD4

= 12.2(33)SRD4

= 12.2(33)SRD4

= 12.2(33)SRD4

= 12.2(33)SRD4

= 12.2(33)SRD4

= 12.2(33)SRD4

= 12.2(33)SRD4

= 12.2(33)SRD4

= 12.2(33)SRD4

= 12.2(33)SRD4

= 12.2(33)SRD4

= 12.2(33)SRD4

= 12.2(33)SRD4

= 12.2(33)SRD4

= 12.2(33)SRD4

= 12.2(33)SRD4

= 12.2(33)SRD4

= 12.2(33)SRD4

= 12.2(33)SRD4

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 15S

96

OL-10362-13

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR

DWDM-XFP-31.12= 12.2(33)SRD4

DWDM-XFP-30.33

ES+ Transport line cards end here

12.2 (33)SRE ES+ line cards start here

Supported Hardware

= 12.2(33)SRD4

76-ES+XC-20G3C

?? A@42 V 7600 ES+XC Combo WAN PHY, OTN/G.709, 10x1GE/ 1x10GE, DFC3C

With Supervisor Engine 720 12.2(33)SRE

With RSP 720 12.2(33)SRE

SFPs Supported

SFP-GE-S 12.2(33)SRE

SFP-GE-L 12.2(33)SRE

SFP-GE-Z 12.2(33)SRE

SFP-GE-T 12.2(33)SRE

GLC-BX-D 12.2(33)SRE

GLC-BX-U 12.2(33)SRE

GLC-GE-100FX 15.0(1)S

CWDM-SFP-1470

CWDM-SFP-1490

CWDM-SFP-1510

CWDM-SFP-1530

CWDM-SFP-1550

CWDM-SFP-1570

CWDM-SFP-1590

CWDM-SFP-1610

DWDM-SFP-3033

DWDM-SFP-3112

DWDM-SFP-3190

DWDM-SFP-3268

DWDM-SFP-3425

DWDM-SFP-3504

DWDM-SFP-3582

DWDM-SFP-3661

DWDM-SFP-3819

DWDM-SFP-3898

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

OL-10362-13

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 15S

97

Supported Hardware

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR

DWDM-SFP-3977= 12.2(33)SRE

DWDM-SFP-4056

DWDM-SFP-4214

DWDM-SFP-4294

DWDM-SFP-4373

DWDM-SFP-4453

DWDM-SFP-4612

DWDM-SFP-4692

DWDM-SFP-4772

DWDM-SFP-4851

DWDM-SFP-5012

DWDM-SFP-5092

DWDM-SFP-5172

DWDM-SFP-5252

DWDM-SFP-5413

DWDM-SFP-5494

DWDM-SFP-5575

DWDM-SFP-5655

DWDM-SFP-5817

DWDM-SFP-5898

DWDM-SFP-5979

DWDM-SFP-6061

DWDM-SFP-3346= 12.2(33)SRE

DWDM-SFP-3739= 12.2(33)SRE

DWDM-SFP-4134= 12.2(33)SRE

DWDM-SFP-4532= 12.2(33)SRE

DWDM-SFP-4931= 12.2(33)SRE

DWDM-SFP-5332= 12.2(33)SRE

DWDM-SFP-5736= 12.2(33)SRE

DWDM-SFP-6141= 12.2(33)SRE

XFPs Supported

XFP-10GLR-OC192SR 12.2(33)SRE

XFP-10GZR-OC192LR 12.2(33)SRE

XFP-10GER-192IR+

XFP-10G-MM-SR 12.2(33)SRE1

DWDM-XFP-C 15.0(1)S

DWDM-XFP-60.61

DWDM-XFP-59.79

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 15S

98

OL-10362-13

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR

DWDM-XFP-58.98= 12.2(33)SRE

DWDM-XFP-58.17

DWDM-XFP-56.55

DWDM-XFP-55.75

DWDM-XFP-54.94

DWDM-XFP-54.13

DWDM-XFP-52.52

DWDM-XFP-51.72

DWDM-XFP-50.92

DWDM-XFP-50.12

DWDM-XFP-48.51

DWDM-XFP-47.72

DWDM-XFP-46.92

DWDM-XFP-46.12

DWDM-XFP-44.53

DWDM-XFP-43.73

DWDM-XFP-42.94

DWDM-XFP-42.14

DWDM-XFP-40.56

DWDM-XFP-39.77

DWDM-XFP-38.98

DWDM-XFP-38.19

DWDM-XFP-36.61

DWDM-XFP-35.82

DWDM-XFP-35.04

DWDM-XFP-34.25

DWDM-XFP-32.68

DWDM-XFP-31.90

DWDM-XFP-31.12

DWDM-XFP-30.33

76-ES+XC-20G3CXL

?? A@42 V 7600 ES+XC Combo WAN PHY, OTN/G.709, 10x1GE/ 1x10GE, DFC3CXL

With Supervisor Engine 720 12.2(33)SRE

With RSP 720 12.2(33)SRE

SFPs Supported

SFP-GE-S 12.2(33)SRE

SFP-GE-L 12.2(33)SRE

SFP-GE-Z 12.2(33)SRE

Supported Hardware

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

OL-10362-13

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 15S

99

Supported Hardware

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR

SFP-GE-T 12.2(33)SRE

GLC-BX-D 12.2(33)SRE

GLC-BX-U 12.2(33)SRE

GLC-GE-100FX 15.0(1)S

CWDM-SFP-1470

CWDM-SFP-1490

CWDM-SFP-1510

CWDM-SFP-1530

CWDM-SFP-1550

CWDM-SFP-1570

CWDM-SFP-1590

CWDM-SFP-1610

DWDM-SFP-3033

DWDM-SFP-3112

DWDM-SFP-3190

DWDM-SFP-3268

DWDM-SFP-3425

DWDM-SFP-3504

DWDM-SFP-3582

DWDM-SFP-3661

DWDM-SFP-3819

DWDM-SFP-3898

DWDM-SFP-3977

DWDM-SFP-4056

DWDM-SFP-4214

DWDM-SFP-4294

DWDM-SFP-4373

DWDM-SFP-4453

DWDM-SFP-4612

DWDM-SFP-4692

DWDM-SFP-4772

DWDM-SFP-4851

DWDM-SFP-5012

DWDM-SFP-5092

DWDM-SFP-5172

DWDM-SFP-5252

DWDM-SFP-5413

DWDM-SFP-5494

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

= 12.2(33)SRE

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 15S

100

OL-10362-13