Cisco Systems 2305-BTS2-R1 Users Manual

Ripwave™ Base Station

Installation & Commissioning Guide

Part Number 40-00047-00

Revision H, Version 1.0

February 4, 2005

Proprietary

All information disclosed by this document is the proprietary property of Navini Networks, Inc. and is protected by

copyright, trademark, and/or trade secret laws. All rights therein are expressly reserved.

Navini Networks, Inc. Ripwave Base Station I&C Guide

About This Document

Purpose

This document provides a Navini-certified Installation & Commissioning Technician or Field
Engineer with instructions to properly install the Base Transceiver Station (BTS), Radio
Frequency Subsystem (RFS), and cabling; and to test and commission the Base Station after
installation.

Revision History

Date Revision/

Version

1.31.05 H/1.0 L. Font S. Redfoot Commercial Release 4.1.6

2.4.05 H/1.0 L. Font S. Redfoot Custom Version for Testing

Authors Editors Comments

Contacts

Contact Navini Networks Technical Support during normal business hours: Monday through
Friday 8:30 a.m. to 5:30 p.m. Central Time. You can also submit questions or comments by web
or email at any time.

Corporate Headquarters: [phone].
Technical Support: 1-866-RIPWAVE
Offshore Number: 001 [phone]
Local Dallas Number: [phone]
Web Address: www.navini.com
E-mail: [e-mail]

Navini Networks, Inc.
2240 Campbell Creek Blvd.
Suite 110
Richardson, Texas 75082
USA

/ select “Support”

2

Navini Networks, Inc. Ripwave Base Station I&C Guide

Permissions, Trademarks & Distribution

Copyright © 2005, Navini Networks, Inc. All information contained herein and disclosed by this
document is the proprietary property of Navini Networks, Inc. and all rights therein are expressly
reserved. Acceptance of this material signifies agreement by the recipient that the information
contained in this document is confidential and that it will be used solely for the purposes set forth
herein. Acceptance of this material signifies agreement by the recipient that it will not be used,
reproduced in whole or in part, disclosed, distributed, or conveyed to others in any manner or by
any means – graphic, electronic, or mechanical, including photocopying, recording, taping, or
information storage and retrieval systems – without the express written permission of Navini
Networks, Inc.

Navini Networks, Internet at the Speed of Thought, zero-install, unwired by Navini, the Navini
Networks logo, and Ripwave are trademarks of Navini Networks, Inc. Other product and
company names mentioned herein may be trademarks and/or service marks of their respective
owners.

Nothing herein constitutes any representation, warranty, assurance, or guaranty of any kind.

Because of continuing developments and improvements in design, manufacturing, and
deployment, material in this document is subject to change without notification and does not
represent any commitment or obligation on the part of Navini Networks, Inc.

Navini Networks, Inc. shall have no liability for any error or damages resulting from the use of
this document. Any unauthorized usage is strictly prohibited without the express written
permission of Navini Networks, Inc.

Copyright © 2005 Navini Networks, Inc. All Rights Reserved.

Navini Networks, Inc.
2240 Campbell Creek Boulevard
Suite 110
Richardson, Texas 75082
USA

3

Navini Networks, Inc. Ripwave Base Station I&C Guide

Table of Contents

CHAPTER 1: OVERVIEW......................................................................ERROR! BOOKMARK NOT DEFINED.

R

IPWAVE DESCRIPTION .....................................................................................ERROR! BOOKMARK NOT DEFINED.

P

ROCEDURAL DOCUMENTS & FORMS ...............................................................ERROR! BOOKMARK NOT DEFINED.

HIGH-LEVEL I&C PROCESS ...............................................................................ERROR! BOOKMARK NOT DEFINED.

BASE STATION COMPONENTS ............................................................................ERROR! BOOKMARK NOT DEFINED.

T

ECHNICAL SPECIFICATIONS .............................................................................ERROR! BOOKMARK NOT DEFINED.

BTS INPUT/OUTPUT SPECIFICATIONS................................................................ERROR! BOOKMARK NOT DEFINED.

CHAPTER 2: INSTALLATION..............................................................ERROR! BOOKMARK NOT DEFINED.

P

RE-INSTALLATION............................................................................................ERROR! BOOKMARK NOT DEFINED.

INSTALL POWER & GROUNDING........................................................................ERROR! BOOKMARK NOT DEFINED.

I

NSTALL CABLES ...............................................................................................ERROR! BOOKMARK NOT DEFINED.

I

NSTALL THE BTS..............................................................................................ERROR! BOOKMARK NOT DEFINED.

INSTALL GPS ANTENNAS ..................................................................................ERROR! BOOKMARK NOT DEFINED.

I

NSTALL THE RFS..............................................................................................ERROR! BOOKMARK NOT DEFINED.

VERIFY INSTALLED CIRCUIT CARDS..................................................................ERROR! BOOKMARK NOT DEFINED.

BASE STATION INSTALLATION CERTIFICATION .................................................ERROR! BOOKMARK NOT DEFINED.

CHAPTER 3: COMMISSIONING..........................................................ERROR! BOOKMARK NOT DEFINED.

R

EVIEW CUSTOMER NETWORK PLANS ..............................................................ERROR! BOOKMARK NOT DEFINED.

INSTALL EMS SERVER ......................................................................................ERROR! BOOKMARK NOT DEFINED.

V

ERIFY CABLE CONNECTIONS...........................................................................ERROR! BOOKMARK NOT DEFINED.

CONFIGURE & POWER UP THE BTS...................................................................ERROR! BOOKMARK NOT DEFINED.

CALIBRATE THE BASE STATION.........................................................................ERROR! BOOKMARK NOT DEFINED.

E

XPORT BTS DATA...........................................................................................ERROR! BOOKMARK NOT DEFINED.

PERFORM THE CALIBRATION VERIFICATION PROCEDURE .................................ERROR! BOOKMARK NOT DEFINED.

SINGLE ANTENNA ELEMENT TEST.....................................................................ERROR! BOOKMARK NOT DEFINED.

I

NSTALL & TEST CUSTOMER EMS OPERATIONS...............................................ERROR! BOOKMARK NOT DEFINED.

PERFORM CALIBRATION USING CUSTOMER’S EMS ..........................................ERROR! BOOKMARK NOT DEFINED.

V

ERIFY SYSTEM PERFORMANCE........................................................................ERROR! BOOKMARK NOT DEFINED.

VERIFY SYSTEM OPERATION WITH MULTIPLE MODEMS...................................ERROR! BOOKMARK NOT DEFINED.

BACK UP EMS DATABASE ................................................................................ERROR! BOOKMARK NOT DEFINED.

C

USTOMER ACCEPTANCE ..................................................................................ERROR! BOOKMARK NOT DEFINED.

APPENDIX C: BTS SPECIFICATIONS................................................ERROR! BOOKMARK NOT DEFINED.

APPENDIX G: SAMPLE BASE STATION DRAWING......................ERROR! BOOKMARK NOT DEFINED.

APPENDIX H: ANTENNA POWER & CABLE SELECTION...........ERROR! BOOKMARK NOT DEFINED.

APPENDIX I: SAMPLE BILL OF MATERIALS (BOM)....................ERROR! BOOKMARK NOT DEFINED.

APPENDIX K: RFS SYSTEM TEST (CABLE & RFS SWEEP).........ERROR! BOOKMARK NOT DEFINED.

APPENDIX O: BASE STATION INSTALLATION CERTIFICATION...............ERROR! BOOKMARK NOT

DEFINED.

APPENDIX S: LOCATION (FTP) TESTS.............................................ERROR! BOOKMARK NOT DEFINED.

APPENDIX V: IC CLOSEOUT TOOL..................................................ERROR! BOOKMARK NOT DEFINED.

4