CipherLab CP50, CP50 G Reference Manual
Windows Embedded Handheld 6.5
CP50/CP50 G
Version 1.00
COPYRIGHT
PREFACE
Copyright © 2012 CIPHERLAB CO., LTD.
All rights reserved
The information contained in this document, including all pictures, illustrations and software,
is the proprietary information of CIPHERLAB CO., LTD. and its respective legal owners; it is
protected by copyright laws and international copyright treaties, as well as other intellectual
property laws and treaties, with all rights reserved.
In no event and by no part shall this document be reproduced, stored in a retrieval system,
or transmitted in any form or by any means including but not limited to electronic,
mechanical, photocopying, and recording without the prior written consent of CIPHERLAB
CO., LTD. Any reverse engineering of software is also prohibited.
DISCLAIMER
The information herein is subject to change without notice. The information and the
intellectual property herein are confidential between you and CIPHERLAB CO., LTD. and
remain the exclusive property of CIPHERLAB CO., LTD. and its respective legal owners.
Should you find any problems in this document, please report them to CIPHERLAB in writing.
CIPHERLAB does not warrant this document is error-free.
TRADEMARK RECOGNITION
CipherLab logo is a registered trademark of CIPHERLAB CO., LTD. Windows Embedded
Handheld is a registered trademark or trademark of Microsoft Corporation in the United
States and/or other countries. All other brands, products and services, and trademark
names are the property of their registered owners. The editorial use of these names is for
identification as well as to the benefit of the owners, with no intention of infringement.
CONTACT
For product consultancy and technical support, please contact CIPHERLAB’s sales
representative in your local area. You may also visit CIPHERLAB web site for more
information.
CIPHERLAB CO., LTD.
Website: http://www.cipherlab.com
SAFETY NOTICES
FOR HAND-HELD PRODUCT WITH RF FUNCTIONS
CP50/CP50 G serial handheld equipment uses wireless radios that have been designed and
manufactured to meet safety requirements for limiting exposure to radio waves. When used
in accordance with the instructions set forth in this manual, the equipment has been
independently verified to not exceed the emission limits for safe exposure to radio
frequency (RF) energy as specified by EN50360 of EEC.
These limits are part of comprehensive guidelines and establish permitted levels of RF
energy for the general population. The guidelines are based on standards that were
developed by independent scientific organization through periodic and thorough evaluation
of scientific studies. The standards include a substantial safety margin designed to assure
the safety of all persons, regardless of age and health.
The exposure standard for all wireless devices employs a unit of measurement known as the
Specific Absorption Rate, or SAR; the SAR limit set by CE is 2.0W/Kg.
For trunk, the SAR value of CP50/CP50 G serial handheld is:
EEC: MAX 0.335W/Kg (CP50 G), 0.013 (CP50)
FOR PRODUCT WITH LASER
CAUTION
This laser component emits FDA / IEC Class 2 laser light at the exit port. Do not
stare into beam.
SAFETY PRECAUTIONS
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE
OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
The use of any batteries or charging devices, which are not originally sold or
manufactured by CipherLab, will void your warranty and may cause damage to human
body or the product itself.
DO NOT disassemble, incinerate or short circuit the battery.
DO NOT expose the scanner or the battery to any flammable sources.
For green-environment issue, it's important that batteries should be recycled in a proper
way.
Under no circumstances, internal components are self-serviceable.
The charging and communication cradle uses an AC power adapter. A socket outlet shall
be installed near the equipment and shall be easily accessible. Make sure there is stable
power supply for the mobile computer or its peripherals to operate properly.
CARE & MAINTENANCE
This mobile computer is intended for industrial use. The mobile computer is rated IP65,
however, the mobile computer can get damaged when being exposed to extreme
temperatures or soaked wet.
When the enclosure of the mobile computer gets dirty, use a clean and wet cloth to wipe
off the dust. DO NOT use/mix any bleach or cleaner. Always keep the LCD dry.
For a liquid crystal display (LCD) or touchscreen, use a clean, non-abrasive, lint-free
cloth to wipe dust off the screen. DO NOT contact the surface with any pointed or sharp
object.
If you want to put away the mobile computer for a period of time, download the
collected data to a host computer, and then take out the battery pack. Store the mobile
computer and battery pack separately.
When the mobile computer resumes its work, it takes some time for the main and
backup batteries to become fully charged.
If you shall find the mobile computer malfunctioning, write down the specific scenario
and consult the sales representative in your local area.
DECLARATION OF CONFORMITY - EU
This device complies with the essential requirements of R&TTE Directive 1999/5/EC. The
following test methods have been applied in order to prove presumption of conformity with
the essential requirements of R&TTE Directive 1999/5/EC:
EN 60950-1: 2006 + A11: 2009
Safety of Information Technology Equipment
EN 300 330-1 V1.7.1: 2006
Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices
(SRD); Radio equipment in the frequency range 9 kHz to 25 MHz and inductive loop systems
in the frequency range 9 kHz to 30 MHz; Part 1: Technical characteristics and test methods.
EN 300 330-2 V1.5.1: 2006
Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices
(SRD); Radio equipment in the frequency range 9 kHz to 25 MHz and inductive loop systems
in the frequency range 9 kHz to 30 MHz; Part 2: Harmonized EN under article 3.2 of the
R&TTE Directive.
EN 300 440-1 V1.6.1: 2010
Electromagnetic compatibility and Radio spectrum Matters (ERM); Short range devices;
Radio equipment to be used in the 1 GHz to 40 GHz frequency range; Part1: Technical
characteristics and test methods.
EN 300 440-2 V1.4.1: 2010
Electromagnetic compatibility and Radio spectrum Matters (ERM); Short range devices;
Radio equipment to be used in the 1 GHz to 40 GHz frequency range; Part 2: Harmonized EN
under article 3.2 of R&TTE Directive.
EN 300 328-V1.7.1: 2006
Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband Transmission
systems; Data transmission equipment operating in the 2,4 GHz ISM band and using spread
spectrum modulation techniques; Harmonized EN covering essential requirements under
article 3.2 of the R&TTE Directive.
EN 301 908-1 V5.2.1: 2011
Electromagnetic compatibility and Radio spectrum Matters (ERM); Base Stations (BS),
Repeaters and User Equipment (UE) for IMT-2000 Third-Generation cellular networks; Part
1: Harmonized EN for IMT-2000, introduction and common requirements, covering
essential requirements of article 3.2 of the R&TTE Directive.
EN 301 511-V9.0.2: 2003
Global System for Mobile communications (GSM); Harmonized standard for mobile stations
in the GSM 900 and DCS 1800 bands covering essential requirements under article 3.2 of
the R&TTE directive (1999/5/EC).
EN 301 489-1 V1.8.1: 2008
Electromagnetic compatibility and Radio Spectrum Matters (ERM); ElectroMagnetic
Compatibility (EMC) standard for radio equipment and services; Part 1: Common technical
requirements.
EN 301 489-3 V1.4.1 2002
Electromagnetic compatibility and Radio Spectrum Matters (ERM); ElectroMagnetic
Compatibility (EMC) standard for radio equipment and services; Part 3: Specific conditions
for Short-Range Devices (SRD) operating on frequencies between 9 kHz and 40 GHz.
EN 301 489-7 V1.3.1: 2005
ElectroMagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic
Compatibility (EMC) standard for radio equipment ad services; Part 7: Specific conditions
for mobile and portable radio and ancillary equipment of digital cellular radio
telecommunications systems (GSM and DCS).
EN 301 489-17 V2.1.1 2009
Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic
Compatibility (EMC) standard for radio equipment and services; Part 17: Specific conditions
for 2,4 GHz wideband transmission systems and 5 GHz high performance RLAN equipment.
EN 301 489-24 V1.5.1: 2010
Electromagnetic compatibility and Radio Spectrum Matters (ERM); ElectroMagnetic
Compatibility (EMC) standard for radio equipment and services; Part 24: Specific conditions
for IMT-2000 CDMA Direct Spread (UTRA) for Mobile and portable (UE) radio and ancillary
equipment.
Version
Date
Notes
1.00
6th July 2012
Initial
RELEASE NOTES
CONTENTS
PREFACE .................................................................................................. II
Copyright .............................................................................................. ii
Disclaimer ............................................................................................. ii
Trademark Recognition .............................................................................. ii
Contact ................................................................................................ ii
Safety Notices ....................................................................................... iii
For Hand-held Product with RF Functions .................................................... iii
For Product with Laser .......................................................................... iii
Safety Precautions .................................................................................. iv
Care & Maintenance ................................................................................ iv
Declaration of Conformity - EU .................................................................... v
RELEASE NOTES ....................................................................................... VII
INTRODUCTION ......................................................................................... 1
About This Document ................................................................................ 1
Features ............................................................................................... 2
Inside the Package ................................................................................... 2
Accessories ............................................................................................ 2
USE MOBILE COMPUTER ............................................................................... 3
Take A Tour ........................................................................................... 4
Overview ........................................................................................... 4
Inside Battery Chamber .......................................................................... 5
Power On/Off ......................................................................................... 6
Notifications .......................................................................................... 7
Battery ................................................................................................. 9
Main Battery Setup ............................................................................... 9
Charge Batteries ................................................................................ 11
Monitor Battery Level .......................................................................... 14
Power Management ............................................................................. 17
Optimize Battery Life .......................................................................... 18
Text Input ........................................................................................... 19
Physical Keypad ................................................................................. 19
Onscreen Keyboard ............................................................................. 25
Handwriting Recognition ....................................................................... 30
Edit Text ......................................................................................... 32
Touch Control ....................................................................................... 34
Use Touchscreen ................................................................................ 34
Screen Orientation ............................................................................. 34
Adjust Backlight ................................................................................. 34
Calibration ....................................................................................... 35
Memory .............................................................................................. 37
Data Loss Caution ............................................................................... 37
Check Storage ................................................................................... 37
Insert SD Card ................................................................................... 39
Direct Data Connection ............................................................................ 40
Use Cable ........................................................................................ 40
Use Cradle ....................................................................................... 40
Syncing Tools .................................................................................... 42
Sync Partnership ................................................................................ 42
1st USB Sync ...................................................................................... 43
Disconnect USB ActiveSync .................................................................... 45
ActiveSync Actions to Take .................................................................... 46
Charging & Communication Cradle .............................................................. 52
Use Converter ................................................................................... 52
Overview ......................................................................................... 53
Pistol Grip ........................................................................................... 54
Install Pistol Grip ............................................................................... 54
Scan ............................................................................................... 54
Uninstall Pistol Grip ............................................................................ 54
Audio Playback ..................................................................................... 55
Volume Control ................................................................................. 55
DATA CAPTURE ........................................................................................ 57
Launch Reader Module(s) ......................................................................... 58
Read Printed Barcodes & RFID Tags ............................................................. 59
Configure Reader(s) ................................................................................ 60
General tabbed page ........................................................................... 60
Symbologies Tabbed Page ..................................................................... 72
About tabbed page ............................................................................. 73
CAMERA ................................................................................................. 75
Launch Camera ..................................................................................... 76
Camera Screen .................................................................................. 76
Take Pictures ....................................................................................... 77
Camera Settings ................................................................................. 78
Launch Camcorder ................................................................................. 80
Camcorder Screen .............................................................................. 80
Shoot Videos ........................................................................................ 81
Camcorder Settings ............................................................................. 82
Pictures & Videos................................................................................... 84
OPERATING SYSTEM .................................................................................. 87
1st Startup ........................................................................................... 88
Today Screen ....................................................................................... 89
Customize Toady Screen ....................................................................... 91
Return to Today Screen ........................................................................ 91
Start Screen ......................................................................................... 92
Return to Start screen ......................................................................... 93
Title Bar .......................................................................................... 93
Manage Notifications ........................................................................... 95
Customize Start Screen ........................................................................ 96
Start Screen Icons .............................................................................. 99
Suspend & Reset Mobile Computer ............................................................. 102
Suspend Mobile Computer .................................................................... 102
Wake up Mobile Computer ................................................................... 103
Reset Mobile Computer ....................................................................... 103
Set Screen Lock .................................................................................... 105
Unlock Screen .................................................................................. 105
Work with Menus .................................................................................. 106
Option MenuS ................................................................................... 106
Context MenuS ................................................................................. 107
Manage Applications .............................................................................. 108
Task Manager ................................................................................... 108
RADIOS ................................................................................................ 115
Access Cellular WAN .............................................................................. 116
Status Icons ..................................................................................... 116
Check What Network You’re Using .......................................................... 116
Enable/Disalbe Mobile Data .................................................................. 117
Use Only 2G Networks ......................................................................... 117
Cellular Data Setup ............................................................................ 118
Edit & Add Access Points ..................................................................... 119
USB Internet Sharing .......................................................................... 120
Use Wi-Fi ........................................................................................... 121
Status Icons ..................................................................................... 121
Enable/Disable Wi-Fi .......................................................................... 121
Wi-Fi Connection Setup ....................................................................... 122
Connect Another Wi-Fi network ............................................................. 126
Edit Wi-Fi Networks ........................................................................... 126
Forget Wi-Fi Netowrks ........................................................................ 126
Receive notifications of Available networks ............................................... 126
Add Wi-Fi Networks............................................................................ 127
Connect by Static IP ........................................................................... 128
Advanced Wi-Fi Settings ...................................................................... 128
Use Bluetooth ...................................................................................... 130
Status Icons ..................................................................................... 130
ChangE Bluetooth name ...................................................................... 130
Expose Mobile computer ...................................................................... 131
Turn on/off Bluetooth ........................................................................ 132
Pair & Connect Bluetooth devices ........................................................... 132
Disconnect Bluetooth Devices ................................................................ 134
Unpair Bluetooth Devices ..................................................................... 135
ReConnect Bluetooth devices ................................................................ 135
Edit Bluetooth Features to Use .............................................................. 135
Bluetooth File Exchange ...................................................................... 136
Bluetooth ActiveSync .......................................................................... 138
Bluetooth Internet Sharing ................................................................... 139
Bluetooth Pass-through Networking ......................................................... 140
Connect to Virtual Private Networks ........................................................... 142
VPN Connection Setup ........................................................................ 142
Connect VPN .................................................................................... 144
Disconnect VPN ................................................................................ 145
Edit a VPN ....................................................................................... 145
Delete a VPN ................................................................................... 146
Install Secure Certificates ....................................................................... 147
Supported Certificate Formats............................................................... 147
View Secure Certificates...................................................................... 147
Install secure CertificateS .................................................................... 148
Location Discovery ................................................................................ 149
Launch GPS & AGPS ........................................................................... 149
Use GPS & AGPS ................................................................................ 150
Use External GPS Receiver with Bluetooth ................................................. 150
Use Secure Access Module ....................................................................... 158
Assemble SAM Card ............................................................................ 158
Collect Payments .............................................................................. 159
PHONE ................................................................................................ 161
About Phone ....................................................................................... 162
SIM Card ............................................................................................ 162
Assemble SIM Card ............................................................................. 162
Status Icons ........................................................................................ 163
Phone Ringtone & Vibrate ....................................................................... 164
Phone Ringtone ................................................................................ 165
Phone Vibrate .................................................................................. 166
Phone Ringer Volume.......................................................................... 166
Place & End Calls .................................................................................. 167
Open Phone ..................................................................................... 167
Call History ..................................................................................... 171
Speed Dial....................................................................................... 172
Back to Phone Application .................................................................... 173
Disable Phone Calls ............................................................................ 174
Answer or Decline Calls .......................................................................... 175
Manage Call History ............................................................................... 176
Open Call History .............................................................................. 176
Add A Caller to Contacts ...................................................................... 176
View Caller Screen............................................................................. 177
Take Other Actions to A Call Log Entry ..................................................... 178
Clear Call History .............................................................................. 178
Call Contacts ....................................................................................... 179
Launch Contacts ............................................................................... 179
Take Other Actions to A Contact Entry ..................................................... 179
Check Voicemails .................................................................................. 180
Options during A Call ............................................................................. 181
Adjust in-call volume .......................................................................... 181
Put A Call on/off Hold ........................................................................ 182
Mute/Unmute Microphone .................................................................... 182
Turn on/off Speakerphone ................................................................... 182
Add A Call ....................................................................................... 183
Other Options .................................................................................. 183
Manage Multiple Calls ......................................................................... 183
Switch between Two Callers ................................................................. 185
Switch between Bluetooth Headset and Speakerphone .................................. 186
Make An Emergency Call ......................................................................... 187
MORE APPLICATIONS ............................................................................... 189
Backup Utility ...................................................................................... 190
Launch Backup Utility ......................................................................... 190
Registry Backup and Restoration ............................................................ 191
System Files Backup ........................................................................... 193
System Files Restoration ...................................................................... 196
Clone ............................................................................................ 198
Button Assignment ................................................................................ 199
Launch Button Assignment ................................................................... 199
Redefine ........................................................................................ 199
Recover Defaults ............................................................................... 201
GPS Viewer ......................................................................................... 202
Launch GPS Viewer ............................................................................ 202
View NMEA-based Data ........................................................................ 204
Signature Utility ................................................................................... 205
Launch Signature Utility ...................................................................... 205
Capture Signatures ............................................................................ 206
View OR Edit Existing Signatures ............................................................ 206
Preferences ..................................................................................... 207
MANAGE MOBILE COMPUTER ...................................................................... 209
Update O.S. Image ................................................................................ 210
USB Upgrade .................................................................................... 210
SD Card Auto Update .......................................................................... 212
SD Card Manual Update ....................................................................... 214
System Settings .................................................................................... 216
Connections Folder ............................................................................ 219
Personal Folder ................................................................................ 225
System Folder .................................................................................. 226
SPECIFICATIONS ..................................................................................... 231
Platform, Processor & Memory .................................................................. 231
Communications & Data Capture ............................................................... 231
Electrical Characteristics ........................................................................ 232
Physical Characteristics .......................................................................... 232
Environmental Characteristics .................................................................. 233
Programming Support ............................................................................. 233
Accessories ......................................................................................... 234
SCAN ENGINE SETTINGS ............................................................................ 235
Symbologies Supported ........................................................................... 236
RFID Tags Supported .............................................................................. 238
LASER (SE955) ....................................................................................... 239
Symbology Settings................................................................................ 239
Miscellaneous ................................................................................... 242
AIM Code ID – Code Characters .............................................................. 242
AIM Code ID – Modifier Characters ........................................................... 243
2D IMAGER (SE4500DL) ............................................................................ 247
Symbology Settings................................................................................ 247
1D Symbologies ................................................................................. 247
2D Symbologies ................................................................................. 253
Miscellaneous ................................................................................... 255
HF RFID READER ..................................................................................... 257
RFID Tag Default Block ........................................................................... 257
PHYSICAL KEYPAD REFERENCE TABLE .......................................................... 259
Numeric Keypad ................................................................................... 259
Use Alpha (α), Shift () & Fn Keys .......................................................... 259
QWERTY Keypad ................................................................................... 261
Use Alpha (α), Shift () & fN kEYS .......................................................... 261
INTRODUCTION
Thank you for choosing CipherLab products. CipherLab welcomes another Windows
Embedded by introducing CP50 Series Mobile Computer. Powered by Windows Embedded
Handheld 6.5, the mobile computer delivers better user experience and promises enterprise
mobile computing.
The mobile computer has transflective LCD to hold up the readability in a wide range of light
conditions, courtesy of the supplementary backlight enabled by a built-in ambient light
sensor. Also on board is a G-sensor to save power according to the mobile computer’s
motion and posture. G-sensor also enables screen orientation when the device poses
sideways or upright. Security Access Modules (SAM) on the other hand favors the mobile
computer with payment applications.
The series sports satisfactory data connections by integrating a communication port for
direct data exchange. For wireless data connections it hosts each Bluetooth and 802.11b/g
module while a 3.75G module is provided on option.
Due to the built-in GPS receiver, Assisted-GPS is possible if 3.75G data is available on the
mobile computer. AGPS accelerates positioning even without a clear view of the sky given
a location-aware application to work with.
Dedicated to data capture, the mobile computer has essential 1D (laser) reader or 2D
imager plus RFID scan engine. A high-specced 5 mega-pixel camera also comes inside to
take pictures and shoot videos to deliver better documentation for users.
Rated with IP65, the rugged CP50 is light-weighted and easy to cradle in your hand, and will
be your good help on field works.
ABOUT THIS DOCUMENT
This guide distills the information about CP50 Series Mobile Computer. Subjects discussed
include the mobile computer’s physical features, platform basics, software and applications,
and part of the accessories to boost the mobile computer’s performance.
We recommend that you keep one copy of this manual at hand for the quick reference for
necessary maintenance.
1
CP50 Mobile Computer Reference Manual
FEATURES
Rugged yet smoothened outlined, with hand strap for secure hold
IP65-rated tough form to survive drop, shock, heat, cold, and impervious to
moisture/dust.
Windows Embedded Handheld 6.5 OS, 800 MHz SAMSUNG S3C6410 CPU
256MB SDRAM to run application programs
2GB NAND flash to store OS, applications, settings and so on.
Storage expansion: 256MB to 4GB MicroSD and 4GB to 32GB MicroSDHC.
OS upgradable with external SD card
Sunlight-readable screen to enhance the viewability of outdoor use.
Ambient light sensor to enable supplementary backlight for LCD and keypad.
G-sensor for power management and screen orientation.
2 symmetric side-triggers for ambidextrous scanning
Total data solution — supporting Bluetooth, 802.11b/g and HSPA+
Security Access Module for payment-related applications
Built-in GPS receiver to deliver location discovery
A-GPS and E911 (CP50 G only)
5 mega-pixel camera for taking pictures and shooting videos.
C++ and .Net programming support
INSIDE THE PACKAGE
The mobile computer ships with the following items. Save the box and packaging material
in case of future need to store or deliver the mobile computer.
Mobile Computer
Rechargeable Li-ion battery pack
Universal power adapter
USB Charging & Communication Cable
Stylus
Product CD
LCD protective film
Quick Start Guide
Hand strap
ACCESSORIES
Optional accessories to enhance the mobile computer’s performance:
Pistol Grip
USB Cable
Hand Strap
Belt Holster with Shoulder Strap
Protective Cover
Charging & Communication Cradle with a spare battery
Vehicle Mount
Vehicle Charger
4-slot Gang Charger
2
IN THIS CHAPTER
Take A Tour ....................................................................... 4
Power On/Off ..................................................................... 6
Battery .............................................................................. 9
Text Input ....................................................................... 19
Touch Control .................................................................. 34
Memory ........................................................................... 37
Direct Data Connection ..................................................... 40
Charging & Communication Cradle ...................................... 52
Audio Playback ................................................................. 55
USE MOBILE COMPUTER
Before the mobile computer takes part in your work, get to know it first. This chapter combs
the basic features of the mobile computer including the power supply, memory, and the
units that bridge users with the mobile computer. This chapter helps you set the mobile
computer to work at the earliest.
3
CP50 Mobile Computer Reference Manual
TAKE A TOUR
No.
Description
No.
Description
1
Status LED
2
Receiver
3
Power key
4
Touchscreen (QVGA)
5
Scan key
6
Keypad
7
Reset toggle (recessed in a cutout)
8
Direct charging- & communication-port
9
Microphone
10
Camera shutter button
11
Side-trigger (user definable)
12
External GPS antenna MMCX connector
(sealed with an attached & hinged rubber)
13
Scan window
14
Stylus
15
Camera
16
Battery lock
17
Battery door
18
Battery release (spring loaded)
19
Volume rocker
20
Side-trigger (user definable)
21
Speaker
22
Headset jack (sealed with an attached
and hinged rubber)
This section shows the major components on the mobile computer and inside battery
chamber. You will also learn how to power on/off the mobile computer and how the mobile
computer gives information about its status.
OVERVIEW
Figure 1: Overview
4
Use Mobile Computer
INSIDE BATTERY CHAMBER
Inside battery chamber are the sockets for SIM card, SAM card and storage card. Each is
equipped with a hinged cover.
Figure 2: Inside Battery Chamber
5
CP50 Mobile Computer Reference Manual
POWER ON/OFF
Powering-off screen
To power on/off the mobile computer, press and hold the Power button sitting above
the upper-left of touchscreen.
When powering off, the O.S. shows a screen that prompts to keep holding the Power button
until the mobile computer turns off. (See also Reset Mobile Computer.)
The power-off here is a “hard-off” by turning off the power supply to hardware. See also
Reset Mobile Computer.
This Power button is also a suspend button, press without holding it to suspend the mobile
computer when you are not actively using it. See also Reset Mobile Computer.
6
Use Mobile Computer
NOTIFICATIONS
Matter
LED Color
Action
Description
Battery
Red & Green
Green on
Battery is fully charged.
Red. Slow blinking
Charging ongoing.
Red. Fast blinking
Charging error that may be caused by
temperature dropping below 0°C or
exceeding 40°C. See also Charge
Batteries.
Red. Fast blinking twice,
then off
Power-on error. The mobile computer
cannot power on when either of the
following happens:
Main battery drops under 7% and
over 1%.
Battery is absent but external power
is connected (by power adapter).
Battery is present (with power more
than 1%) but battery door isn’t in
place. See also Main Battery Setup.
Scanning
Good Read
Green
On for 2 seconds, then off
Enable/disable this notification by the
bundled utility ReaderConfigMobile.exe.
See the setting at Notifications.
Radios
Blue
Aptly blinking
Wi-Fi, Bluetooth or mobile data in use
The mobile computer features visible, audible, and tactile feedback to draw users’ prompt
awareness of the mobile computer’s contiguous events such as barcode reading,
wireless/mobile data connections, and battery charging.
STATUS LED
A triple-color LED light is recessed up front the mobile computer to communicate the mobile
computer’s statuses as below:
LED light is also programmable. See the API library that is readied for your reference.
SPEAKER
The mobile computer has a speaker on the rear for audio signaling, audio playback, and
phone ringtones.
The speaker sounds for system events, application warnings, onscreen items selections and
stroke on physical keypad as per Sounds & Notifications setting. In noisy environment, the
speaker remains efficacious with the help of a headset. To control sound volume, see
Volume Control.
The speaker also sounds for good barcode reading, which can be enabled/disabled by
CipherLab’s ReaderConfigMobile.exe. See Notifications for setting.
VIBRATOR
The mobile computer owes the tactile feedback to the vibrator built inside. The vibrator
applies vibration to users to alert them of the mobile computer’s status.
7
CP50 Mobile Computer Reference Manual
Working based on user’s sense, the vibrator is particularly helpful when the mobile
computer is serving in noisy environment.
Same as the speaker and LED light, the vibrator works for good barcode reading.
CipherLab’s utility ReaderConfigMobile.exe enables users to turn the vibration on/off and
decides the duration. See Notifications.
The vibrator is also programmable. See the API library that is provided for your reference.
8
Use Mobile Computer
BATTERY
The mobile computer is fed by two batteries, main battery pack and backup battery. Main
battery is removable and replaceable from battery chamber while backup battery is
mounted on the main board inside the mobile computer.
When the mobile computer ships, main battery isn’t installed but stored in a separate
package, which keeps it in good condition for future use.
MAIN BATTERY
Main battery is a 3.7V / 3300 mAh Li-ion battery pack to be put inside battery chamber.
Typically it takes about 4 hours to charge the main battery to full. The working time of the
mobile computer varies by its working states. Under normally operation, it works for up to
10 hours. An icon on Title Bar helps monitor main battery level. See Main Battery .
See also Main Battery Setup for the assembly.
BACKUP BATTERY
Backup battery settles on the main board inside the mobile computer. It is a 25 mAh
rechargeable Lithium type. When main battery is absent or depleted, backup battery takes
over to feed the mobile computer. Without main battery, a fully charged backup battery
retains the data in the DRAM and holds the system in suspension for 30 minutes.
Backup battery is rechargeable by the external power (through power adapter) or main
battery pack. It takes about 8 hours to charge it to full. An icon on the Title Bar makes
it observant that backup battery gets low. See also Backup Battery Level.
Note: To power on the mobile computer, the battery door must be installed in place. If not,
the status LED will blink red twice and go off to alert to failure to power on the mobile
computer. See also Status LED.
MAIN BATTERY SETUP
To secure main battery in place, the battery door is equipped with two latches, battery lock
and battery release. Battery lock needs to be manually closed while battery release is
spring-loaded and closes automatically.
Figure 3: Battery Door Latches
9
CP50 Mobile Computer Reference Manual
To install main battery pack, follow through the steps below by referencing to the
illustration:
Figure 4: Main Battery Setup
10
Use Mobile Computer
1) Remove hand strap.
Charging Time
Main battery: It takes circa 4 hours to charge main battery to full (direct charging with power
adapter). The status LED above the touchscreen slowly blinks red during charging, and lights
green and stays on when fully charged.
Backup battery: Backup battery is rechargeable by both main battery and power adapter. It
takes about 8 hours to charge it to full. Besides it needs not to be fully charged for the mobile
computer to work.
Charging Temperature
It is recommended that batteries be charged at room temperature (18°C~25°C) for optimal
performance.
Charging stops when temperature drops below 0°C or exceeds 40°C.
Power Consumption
When all radios (802.11b/g, Bluetooth, mobile data (HSPA+), GPS) are active on battery power,
main battery drops substantially.
In order to prevent system from shutting down due to depleted main battery, we suggest that
you keep a fresh battery for replacement or have the mobile computer access the radios on
external power.
2) Push battery lock to unlock position.
3) Push back battery release, which is spring-loaded.
Battery door opens automatically. Detach battery door to reveal battery chamber.
4) Have main battery pack. Position and fit it into battery chamber by meeting its edge
connectors with the contact pins inside chamber.
5) Click battery door back in place.
6) Push battery lock to lock position.
Note: (1) Any improper handling may reduce battery life.
(2) When main battery level drops to low level, charge it ASAP or replace it with a
charged one.
(3) Always turn off the mobile computer to replace main battery pack.
CHARGE BATTERIES
Due to shipment, it is likely main battery and backup battery aren’t fully charged when you
receive the package. Before setting the mobile computer to work, charge main battery to
full by direct charging using power adapter (with the help of a USB Charging &
Communication Cable or Cradle).
Since main battery is the only source backup battery taps power from, be sure to install
main battery for the 1st charge so both main battery and backup battery get charged.
Some key facts about charging batteries:
The following guides how to charge batteries.
11
CP50 Mobile Computer Reference Manual
DIRECT CHARGING USING CABLE
When data
transmission is
required.
Direct charging the mobile computer relies on the USB Charging & Communication Cable
(hereinafter “USB cable”) included in the package. There is a power jack on the connector
of this USB cable to tap external power.
Before start charging, install main battery as described in Main Battery Setup. Then follow
through the steps below:
1) Lock up USB cable to the mobile computer.
2) Have the power adapter. Plug its power cord to the power jack on USB cable’s connector.
3) Connect power adapter’s wall-wart plug to a power outlet.
To output data to your PC or laptop, connect USB cable to it. See Direct Data Connection for
follow-ups.
Figure 5: Direct Charging Using Cable
12
Use Mobile Computer
DIRECT CHARGING USING CRADLE
Only when data
transmission is required.
Direct cradle charging makes use of a Charging & Communication Cradle (hereinafter
“cradle”). Cradle is one of the accessories you can opt for.
Before start charging, install main battery as described in Main Battery Setup. Then follow
through the steps below:
1) Seat the mobile computer into cradle.
2) Connect cradle to an external power source using power adapter.
To output data to your PC or laptop, connect two devices with USB cable. See Direct Data
Connection for follow-ups.
Note: When the mobile computer is charged through cradle, and USB cable is also
connected for data, the power jack on USB cable’s connector is inefficacious.
Figure 6: Direct Charging Using Cradle
13
CP50 Mobile Computer Reference Manual
MONITOR BATTERY LEVEL
Icon
Battery Status
Main battery is getting charged from external power.
Main battery reaches 80% to full.
Main battery partially drains between 60%-79%.
Main battery drops between 40%-59%.
Main battery drops between 20%-39%. O.S. prompts for recharge.
Main battery drops under 7%. Battery needs charging immediately.
Main battery is the only source that feeds the mobile computer to work. It also supplies the
backup battery on main board to hold the data stored in DRAM. Hence when main battery
gets low, recharge it or change it as soon as possible. But foremost, back up the important
data from time to time to protect your work.
MAIN BATTERY LEVEL
The O.S. features a few icons for user’s immediate awareness of main battery level. These
icons avail themselves of Title Bar to show. Title Bar settles at the top of almost every
screen.
STATUS ICONS
Main battery icons communicate the following statuses:
MORE CHARGE INFO
To know more about main battery level:
1) Tap Windows icon on Softkey bar or hit physical Windows key .
Start screen opens.
2) Tap Settings | System | Power .
Power application opens showing Battery tabbed page. The page shows a horizontal bar
to enable user’s quick grasp of battery’s contiguous power amount with a glance.
When main battery isn’t being charged, the page auto-rates the remaining power with
percentage. However when main battery is being charged, the page doesn’t show
percentage-amount but “charging” state only. However the horizontal graphic bar
encapsulates the remaining power amount whether main battery is being charged or
not.
14
Use Mobile Computer
Main battery isn’t being charged.
Main battery is being charged.
Power amount delivered in percentage
enables more accuracy.
The horizontal graphic bar shows coarse
power amount.
LOW BATTERY ALERTS
Main Battery Very Low prompt
When main battery level drops below 40% , the mobile computer prompts “Main Battery
Low” for a recharge. When further sucked under 20%, the mobile computer prompts “Main
Battery Very low” to solicit your immediate transaction.
Low battery may incur shutdown to the mobile computer and threats DRAM data. Always
save data before running short of power or keep a fresh battery at hand for replacement.
15
CP50 Mobile Computer Reference Manual
Once battery level drops under 7% (no more than 6.9%), the mobile computer enters
Icon
Battery Status
Battery level drops low and needs charging.
Full
Partially drained
Low
suspension and cannot be awoken unless 7% is regained. If you try to wake up the mobile
computer by pressing Power button under such circumstances, it doesn’t at all and LED light
blinks to alert.
Note: There are other cases when the mobile computer cannot be awoken:
(1) When battery door isn’t installed in place.
(2) Imperfect contact between main battery and battery chamber contact pins.
When main battery further drops down to 1%, the mobile computer shuts down
automatically. Backup battery takes over to hold DRAM data, for 30 minutes if it is fully
charged. Replace main battery pack immediately.
BACKUP BATTERY LEVEL
For user’s immediate awareness of backup battery level, O.S. shows an icon on Title Bar
when battery level drops low.
STATUS ICONS
Backup battery icon delivers the following statuses:
MORE CHARGE INFO
To learn more about backup battery level:
1) Tap Windows icon on Softkey bar or hit physical Windows key .
Start screen opens.
2) Tap Settings | System | Power.
Power application opens showing Battery tabbed page. Backup battery level displays by
a pie graph, which roughly sketches backup battery level:
16
Loading...