Cino L780, F680, L680, F790, F780 Programming Manual

...

Download

Page 1

International Edition, Rev. D14

Page 2

FuzzyScan

Programming Manual

Revision History

Rev. No.

Released Date

Description

Rev.B Beta

Apr. 16, 2009

 First Release

Rev.B0

May 05, 2009

 Modify “Symbology Reading Control” - “Code 128/EAN-128 Setting” and “ GS1 DataBar Setting”  Add “Appendix” - “Symbology ID Table”.

Rev.B1

June 22, 2009

 Add “Operation Control” - “Presentation Scanning Mode”.(Rename to “Presentation Control” on

Rev.B4)

 Add “Operation Control” – “Time Delay to Low Power Mode”.

Rev.B2

Aug. 21, 2009

 Add “Symbology Reading Control” - “Composite Code Setting”, “PDF/Micro PDF417 Setting”,

“Codablock F Setting”, Korea Post Code Setting”.

 Add “Operation Control” – “SmartStand Power Off Timeout”.  Add “Condensed DataWizard” - “PDF417/Micro PDF417”, “Codablock F”, “Korea Post Code”  Modify “Appendix” – “ Symbology ID Table”

Rev.B3

Oct. 16, 2009

 Add “Host Interface Selection” - “IBM PS/2, 25-30 series keyboard wedge interface”.  Add “Operation Control” - “Presentation Scanning Auto-sense”.  Add “Appendix” – “ Symbology ID Table” – “Code 128”

Rev.B4

Mar. 05, 2010

 Modify “Symbology Reading Control” - “UPC-A & UPC-E Setting”  Rename “Serial Interface Control” – “Time Out Control” to “Serial Response Time-out”.  Rename “ Operation Control” – “Presentation Scanning Mode” to “Presentation Control”  Rename “Operation Control” – “Auto Power Off Duration” to “Light Source On Time”.  Rename “Operation Control” – “ Presentation Scanning Auto-sense” to “Presentation Auto-sense”  Modify “Operation Control” - “Good Read Duration”  Add “Operation Control” - “ Presentation Sensitivity”  Add ““Appendix” – “Master Default” System Command

Rev. B5

Apr.12, 2010

 Modify “Operation Control” - “ Hands Free Time-out”

Page 3

FuzzyScan

Programming Manual

Revision History

Rev. No.

Released Date

Description

Rev. B6

May 27, 2010

 Modify “Serial Interface Control” – “ Baud Rate”

Rev. B7

Jun 25 , 2010

 Modify “Symbology Reading Control” - “UPC-A & UPC-E Setting”  Modify “Operation Control” - "Time Delay to Low Power Mode"

Rev. B8

Sep 29 , 2010

 Modify “Symbology Reading Control” - “UPC-A & UPC-E Setting” and “EAN Setting”  Modify “Keyboard Interface Control” – “Keyboard Layout (Language) Setting”  Add “Operation Control” - “Scan Rate Control” and “Good Read Indicator”

Rev. B9

Nov 10 , 2010

 Modify “Serial Interface Control” – “ Baud Rate”

Rev. C1

Mar 04, 2011

 Modify “Serial Interface Control” – “ Baud Rate”

Rev. C2

Mar 22, 2011

 Modify “Symbology Reading Control” - “Code 39 Setting”  Modify “Serial Interface Control” – “Protocol, ACK/NAK Setting”

Rev. C3

Jul 22, 2011

 Rename “ Symbology Reading Control” - “ UCC/EAN-128” to “GS1-128”  Rename ““Serial Interface Control” – “ ACK/NAK Transmission Indication” to “ACK Indication”  Modify “Serial Interface Control” – “ACK Indication” and “Serial response time -out”.  Rename “Condensed DataWizard” - “ UCC/EAN-128” to “GS1-128”

Rev. C4

Nov 04, 2011

 Modify “Symbology Reading Control” - “ Codabar/ NW-7 Setting ”

Rev. C5

Jan 02, 2012

 Modify “ Wand/Laser Emulation Control” – “ Code 39/Code 128 Emulation”

Rev. C6

Mar 05, 2012

 Add “Operation Control” - "1D Barcode Forward-reading Indication”, “1D Barcode Backward-reading

Indication”, and “1D Barcode Direction Indication Transmission”.

Rev. C7

Jul 25, 2012

 Add “Host Interface Selection” – “ USB HID Legacy”  Modify “Symbology Reading Control” - “Code 128 Setting”  Modify “ Wand/Laser Emulation Control” – “ Code 39/Code 128 Emulation”  Modify “Operation Control” - "Operation Mode Setting”, “Presentation Control”  Add “Operation Control” - " LED illumination Control” and “LED Illumination Delay”

Rev. D1

Dec. 18, 2012

 Support 2D Functions.

Page 4

FuzzyScan

Programming Manual

Revision History

Rev. No.

Released Date

Description

Rev. D2

Apr. 22. 2013

 Modify “Symbology Reading Control” - “ Data Matrix Setting  Modify “Operation Control” - “Batch Reading rule example”

Rev. D3

Aug. 20, 2013

 Modify “Symbology Reading Control” - “Readable Bar Code Setting”  Modify “Appendix” - “Symbology ID Table”

Rev. D4

Sep. 06, 2013

 Modify “ Condensed DataWizard” - “1D Bar Code Symbology” and “2D Bar Code Symbology”

Rev. D5

Mar. 06, 2014

 Modify “Symbology Reading Control” - “GS1 DataBar Setting  Add “Appendix” – “ USB HID Legacy Mode” Quick Set

Rev. D6

Feb. 06, 2015

 Modify “Symbology Reading Control” - “MaxiCode Setting”

Rev. D7

Aug. 17, 2015

 Add “Host Interface Selection” – “ USB EFT Terminal Mode”

Rev. D8

Dec. 25, 2015

 Revise “Revision History”  Add “Getting Started” - A670 series scanner

Rev. D9

May 31, 2016

 Add “Operation Control” – “Buzzer Volume”

Rev. D10

Aug. 04, 2016

 Add “Symbology Reading Control” - “Small DM Code Reading”

Rev. D11

Oct. 11, 2016

 Modify “Operation Control” – “Buzzer Volume”  Modify “Operation Control” – “Buzzer Tone Adjust”

Rev. D12 Rev. D13

Jan. 23, 2017 Mar. 09, 2017

 Modify “Operation Control” – “Buzzer Tone Adjust”  Remove “Operation Control”- “Dollar Sign” ;

Add “Keyboard Interface Control” - “Dollar Sign Control”

Rev. D14

March. 02, 2018

 Add new release model “A780” and “A680”.  Modified “Symbology Reading Control” - “Readable Symbology Setting” – “Popular 1D”  Modified “Getting Familiar with Your FuzzyScan” - A780 and A680 series scanner

Page 5

FuzzyScan

Programming Manual

Cino makes no warranty of any kind with regard to this publication, including, but not limited to, the implied warranty of merchantability and fitness for any particular purpose. Cino shall not be liable for errors contained herein or for incidental consequential damages in connection with the furnishing, performance, or use of this publication. This publication contains proprietary information that is protected by copyright. All rights are reserved. No part of this publication may be photocopied, reproduced or translated into any language, in any forms, in an electronic retrieval system or otherwise, without prior written permission of Cino. All product information and specifications shown in this document may be changed without prior notice.

Warranty

Cino warrants its products against defects in workmanship and materials from the date of shipment, provided that the product is operated under normal and proper conditions. The warranty provisions and durations are furnished by different warranty programs. The above warranty does not apply to any product which has been (i) misused; (ii) damaged by accident or negligence; (iii) modified or altered by the purchaser or other party; (iv) repaired or tampered by unauthorized representatives; (v) operated or stored beyond the specified operational and environmental parameters; (vi) applied software, accessories or parts are not supplied by Cino; (vii) damaged by circumstances out of Cino’s control, such as, but not limited to, lightning or fluctuation in electrical power. Any defective product must follow the warranty program and RMA procedures to return Cino for inspection.

Regulatory

Part 15 Subpart B

KN22, KN24 (KN61000-2,-3,-4,-5,-6,-8,-11)

EN55022, EN55024, EN61000-3-2, EN61000-3-3, EN60950-1, EN61000-6-3, EN61000-6-2

Class B ITE

CNS13438

LED Eye Safety

IEC62471 Exempt group

AS/NZS CISPR 22 Class B

Laser Eye Safety

IEC60825-1 Class 1

Page 6

FuzzyScan

Programming Manual

Table of Contents

Getting Started

Getting Familiar with Your FuzzyScan 1 Connecting to Your Host 3 Using Accessories 4

Configure Your FuzzyScan

Bar Code Programming Manual 5 Programming Procedures 6 Host Interface Selection 10 Symbology Reading Control 11 Keyboard Interface Control 43 Serial Interface Control 48 Wand/Laser Emulation Control 52 Operation Control 54 Condensed DataWizard 71

Appendix

Symbology ID Table 79 Keyboard Function Code Table 81 ASCII Input Shortcut 82 Host Interface Quick Set 83 Operation Mode Quick Set 84 Option Codes 85 System Commands 87

Page 7

FuzzyScan

Programming Manual

Getting Started

Getting Familiar with Your FuzzyScan

Thank you for choosing Cino FuzzyScan Bar Code Scanner. All FuzzyScan scanners deliver world-class performance for a broad range of applications to unleash your productivity.

FuzzyScan family includes A series area imager, F series linear imager and L series laser imager. The Antimicrobial models are available for A770, L780 and F780 series scanners which are equipped with Disinfectant-ready Housing and Vibrator. Moreover, the option of Vibrator is available for all other series upon request. For more details, please visit our web site or contact your supplier.

This document provides an easy reference for installation and operation purpose. The complete documentation is available at www.cino.com.tw.

A770 Series

A780 Series

A680BT Series

Power Indicator Status Indicator Trigger

Scan Window Beeper Cable Release Hole

Page 8

FuzzyScan

Programming Manual

Getting Started

F790/F780/ L780 Series

F560 Series

A670/F680/L680 Series

Power Indicator Status Indicator Trigger

Scan Window Beeper Cable Release Hole

Page 9

FuzzyScan

Programming Manual

Getting Started

Connecting to Your Host

FuzzyScan scanners support USB and RS-232 Serial interfaces. Please choose your desired interface cable, then plug it into the cable interface port of the scanner and connect it to the host. If you would like to remove the cable, please straighten one end of a paper clip, and then insert it into the cable release hole to pull out the cable.

RS232 Serial

USB HID & USB COM

Page 10

FuzzyScan

Programming Manual

Getting Started

Using Accessories

You can enhance productivity of your workforce by using various accessories to fulfill a wide variety of application demand.

Universal Holder

The stylish Universal Holder is designed for storing your scanner when not in use. It serves to protect the scanner from lens-scratched or falling. Moreover, its artistic-design enhances the entire value of the scanner. But please note that the holder is not applicable for A series scanners.

Hand-free SmartStand

SmartStand is specifically designed for hand-free applications to maximize user’s comfort and productivity. You can adjust the scanner holder to desired position for optimized scanning.

Thanks to the auto-sense design, the scanner is capable of switching between presentation scanning and hand-held scanning automatically while working with SmartStand. But please note that this feature is not available for F500 series scanners.

In presentation mode, the barcode may not be detected by the scanner in an environment with very dim ambient lighting. You can select higher sensitivity level through the setting of Presentation Sensitivity to increase scanner’s sensitivity.

Page 11

FuzzyScan

Programming Manual

Configure Your FuzzyScan

Bar Code Programming Manual

The FuzzyScan bar code commands are specially designed Proprietary bar code labels which allow you to set the FuzzyScan internal programming parameters. There are System Command, Family Code and Option Code for programming purpose.

Each programmable family and bar code command label is listed on the same page with major system commands. The detailed explanations and special programming flowchart are printed on facing or following pages. You can read the explanation and set the FuzzyScan concurrently.

A supplemental bar code command menu incorporates the bar code command labels of System Command and Option Code. As you set the FuzzyScan, open the bar code command menu to find the option code page. You may scan the desired family code and option code to set FuzzyScan. If you want to change the programming family for multiple settings, you need only turn over the programming page to find next desired programming family.

System Command

The System Command is the highest level bar code command which directs FuzzyScan to perform immediate operations, such as entering programming mode (PROGRAM), exiting programming mode (EXIT), listing system information (SYSLIST), recovering to factory preset configurations (M_DEFAULT) and so on. Please note that all system commands will take a few seconds to complete the operations. User must wait for the completion beeps before scanning another bar code.

Family Code

The Family Code is scanned to select the user desired programming family. FuzzyScan has already provided more than one hundred programming families to meet any specific requirements.

Option Code

The Option Codes is a set of bar code commands represented by “0–9”, “A–F” and finishing selection (FIN). For most setting, you must select at least one option code following the family code selection to set the desired parameter for the selected programming family.

Page 12

FuzzyScan

Programming Manual

Configure Your FuzzyScan

Programming Procedures

As you scan the bar code command to select the desired parameters, information about the final selected parameters represented by the bar code commands are stored in the FuzzyScan’s internal Flash Memory ASIC or memory. If you turn off the unit, the Flash Memory ASIC or non-volatile memory retains all programming options. You need not re-program the FuzzyScan if you want to keep the existing configurations in the next power on.

The programming procedures of FuzzyScan are designed as simple as possible for ease of setting. Most programming families take the Single Scan Selection programming procedure. But several programming families have more complex and flexible programmable options, and you must take Multiple Scans Selection, Cycling Scan Selection or Dual Level Selection to complete their programming procedures. Each kind of programming procedure is listed in the following pages for your reference. Please give careful attention to become familiar with each programming procedure.

If the programming family must take multiple scans selection, cycling scan selection, or dual level selection procedures, the family of the programming menu will be marked with the matched representing symbol of Programming Category (P.C.) in bold font listed in the following table. You can easily find the bold mark in the programming menu, and refer to their flowcharts for details. Before setting the FuzzyScan, please also refer to the

“Beeping Indications” listed in Appendix to understand the

details of programming beeping indications. It will be very helpful for you to know the existing status while you are programming the FuzzyScan.

Conventions of Programming Menu

Conventions

Descriptions



Factory Default Value

P.C.

Programming Category SS

: Single scan selection MS : Multiple scans selection CS : Cycling scan selection DS : Dual level scan selection

( )

Necessary Option Code

[ ]

Selectable Option Code

Page 13

FuzzyScan

Programming Manual

Configure Your FuzzyScan

Scan

“END”

FuzzyScan will exit programming mode, and store all

parameters in Flash Memory ASIC or non-volatile memory,

then issue the completion beeping.

Scan

“PROGRAM”

FuzzyScan will enter programming mode,

and inhibit all non-programming functions.

Scan

“

SYSLIST”

FuzzyScan will list the product information and

revision number to host via selected host interface,

then issue the completion beeping.

Scan

“M_DEFAULT”

FuzzyScan will recover all programmable

parameters into factory preset configurations,

then issue the completion beeping.

Program & End

Please note that the FuzzyScan will take 3-4 seconds to store parameters in internal Flash Memory ASIC or non-volatile memory after you scan the “END”. Please don’t turn off the power before the completion beeping. It may destroy all configured parameters.

System List, Group & Master Default

Page 14

FuzzyScan

Programming Manual

Configure Your FuzzyScan

Single scan selection

Multiple scans selection

Scan

“PROGRAM”

Scan

One of Family Codes

Scan

One of Option Codes

Repeat

Selection

Scan

“END”

Yes

Enter programming mode.

Select one of desired programming families.

Select one option code of desired parameter.

Want to select another programming family?

Exit programming mode.

Enter programming mode.

Select one of desired programming families.

1. Select one or several option codes to select desired parameters.

2. If it’s necessary, scan “FIN” to terminate option code selection.

Want to select another programming family?

Exit programming mode.

Scan

“PROGRAM”

Scan

One of Family Codes

Scan One or

Several Option Codes

Repeat

Selection

Scan

“END”

Yes

Page 15

FuzzyScan

Programming Manual

Configure Your FuzzyScan

Cycling scan selection

Dual level selection

Enter program ming m od e .

Select one of desired prog ram m ing fam ilies.

Cyclin g s e lect o ne o r several op tion co d es o f desire d param eters as “ Sing le” or “ Mu ltip le” scans selectio n .

Finish cyclin g selectio n.

(If necessary)

W ant to select another prog ram m ing fam ily?

Exit program ming m od e.

Sca n

“ PR O GR AM ”

Sca n

One of Family Co des

Sca n

One of Optio n Co des

Repeat

Selection

Sca n

“EN D”

Yes

Sca n “F IN ”

Enter program ming m od e .

Select one of desired prog ram m ing fam ilies.

Select sev e ral option co d es of d es ired param eters.

1. Select o ne o r several option co d es of d es ired para meters .

2. If it’s n e cess a ry, scan “ FIN” to termina te option co d e selectio n.

W ant to select another prog ram m ing fam ily?

Exit program ming m od e.

Sca n

One of Family Co des

(1st) Sca n

Seve ral O ption C odes

Yes

Sca n

“PR OG RAM ”

Repeat

Selection

Sca n

“EN D”

(2nd ) Scan O ne or

Seve ral O ption C odes

Page 16

FuzzyScan

Programming Manual

Configure Your FuzzyScan

PROGRAM

Host Interface Selection

F_DEFAULT

Family Code Selection

P.C

Parameter Selection

Option Code

Host Interface Selection

MS MS MS MS MS MS MS MS MS MS MS MS

IBM PS/2, 25-30 series keyboard wedge interface Standard/TTL RS-232 peer-to-peer serial Wand Emulation USB Com Port Emulation PS/2 (DOS/V) direct link (keyboard replacement) PS/2 (DOS/V) keyboard wedge turbo mode PS/2 (DOS/V) keyboard wedge standard mode Laser emulation USB HID standard mode  USB HID turbo mode USB HID Legacy USB EFT Terminal Mode

02 06 08 09 10 13 14 17 18 19 20 21



A series doesn’t support Wand emulation, Laser emulation, USB HID Legacy and USB EFT Terminal Mode.



USB EFT Terminal Mode is only available on Trigger Mode.

Page 17

FuzzyScan

Programming Manual

Configure Your FuzzyScan

PROGRAM

Symbology Reading Control

 User Defined Symbol ID 

F_DEFAULT

Family Code Selection

P.C

Parameter Selection

Option Code

2nd Option Code

Symbol ID : 1 character

Code 128 (default=B) GS1-128 (default=C) UPC-A (default=A) EAN-13 (default=F) Codabar/NW-7 (default=D) Code 39/Code 32 (default=G) Code 93 (default=H) Standard/Industrial 2 of 5 (default=I) Interleaved 2 of 5 (default=J) Matrix 2 of 5 (default=K) China Postal Code (default=L) German Postal Code (default=M) IATA (default=O) Code 11 (default=P) MSI/Plessey (default=R) UK/Plessey (default=S) Telepen (default=T) GS1 DataBar (default=X) UPC-E (default=E) EAN-8 (default=N) Trioptic Code 39 (default=W) UCC Coupon Extended Code (default=Z) PDF417/Micro PDF417 (default=V) Codablock F (default=Y) Code 16K (default=Q) Code 49 (default=U) Korea Post Code (default=a)

QR & Micro QR Code (default=b) Data Matrix (default=c)

Maxi Code (default=d)

00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25

26 28 29 30

(1 character) (1 character) (1 character) (1 character) (1 character) (1 character) (1 character) (1 character) (1 character) (1 character) (1 character) (1 character) (1 character) (1 character) (1 character) (1 character) (1 character) (1 character) (1 character) (1 character) (1 character) (1 character) (1 character) (1 character) (1 character) (1 character)

(1 character) (1 character) (1 character)

(1 character)

Page 18

FuzzyScan

Programming Manual

Configure Your FuzzyScan

PROGRAM

Symbology Reading Control

 User Defined Symbol ID 

F_DEFAULT

Family Code Selection

P.C

Parameter Selection

Option Code

2nd Option Code

Symbol ID : 1 character

Aztec Code (default=e) Chinese Sensible (default=f) Australian Post (default=g) British Post (default=h) Intelligent Mail (USPS 4CB/One Code) (default=j) Japan Post (default=k) Netherlands KIX Post (default=l) US Planet (default=m) US Postnet (default=o)

31 32 33 34 36 37 38 39 41

(1 character) (1 character) (1 character) (1 character) (1 character) (1 character) (1 character) (1 character) (1 character)

Page 19

FuzzyScan

Programming Manual

Configure Your FuzzyScan

PROGRAM

Symbology Reading Control

 Symbology ID Transmission 

F_DEFAULT

Family Code Selection

P.C

Parameter Selection

Option Code

Symbology ID Transmission

SS SS SS SS SS SS SS

Disable symbology ID transmission



Enable prefix CINO symbology ID transmission Enable suffix CINO symbology ID transmission Enable both prefix and suffix CINO symbology ID transmission Enable prefix AIM symbology ID transmission Enable suffix AIM symbology ID transmission Enable both prefix and suffix AIM symbology ID transmission

0 1 2 3 4 5 6

Page 20

FuzzyScan

Programming Manual

Configure Your FuzzyScan

PROGRAM

Symbology Reading Control

 Readable Bar Code Setting 

F_DEFAULT

Family Code Selection

P.C

Parameter Selection

Option Code

Readable Symbology Setting

SS CS CS CS CS CS CS CS CS CS CS CS CS CS CS CS CS CS CS CS CS CS CS CS CS CS CS CS CS CS CS CS CS

Auto  Popular 1D Code 128 * GS1-128 * UPC-A * UPC-E * EAN-13 * EAN-8 * Codabar/NW-7 * Code 39 * Trioptic Code 39 Standard/Industrial 2 of 5 Matrix 2 of 5 Interleaved 2 of 5 * China Postal Code Germany Postal Code Code 93 * Code 11 MSI/Plessey UK/Plessey Telepen GS1 DataBar (RSS-14) * IATA PDF417 * /Micro PDF417 Codablock F Code 16K Code 49 Korea Post Code QR Code */ Micro QR Code * Data Matrix * MaxiCode Aztec Code *

Chinese Sensible (Han Xin) Code

01 31 02 03 04 05 06 07 47 08 38 48 58 68 09 10 11 12 13 14 15 17 18 19 20

21 A0 A1 A2 A3 A4

Remember to scan “FIN” to terminate this selection. But if you select the “Auto”, FuzzyScan will terminate this selection automatically.

Page 21

FuzzyScan

Programming Manual

Configure Your FuzzyScan

PROGRAM

Symbology Reading Control

 Readable Bar Code Setting 

F_DEFAULT

Family Code Selection

P.C

Parameter Selection

Option Code

Readable Symbology Setting

CS CS CS CS CS CS CS

Australian Post British Post Intelligent Mail barcode Japanese Post KIX Post Planet Code Postnet

B0 B1 B3 B4 B5 B6 B8



If your application is known, you may select those known symbologies only to increase the reading speed and decrease the possibility of reading error. Furthermore, to add the “Symbology ID” into the transmitted data is also helpful to identify the specific symbology.



Above symbologies marketed with * are enabled as default. When you select “Auto”, the scanner only reads those symbologies marked with *.



"Popular 1D" includes "Code 128", "GSA-128", "UPC-A", "UPC-E", "EAN-13", "EAN-8", "Codabar/NW-7", "Code 39", " Interleaved 2 of 5", "Code 93", "GS1 DataBar (RSS-14)".



When you set the minimum and maximum length of each symbology, please note the data length of scanned bar code doesn’t include start/stop characters.

Page 22

FuzzyScan

Programming Manual

Configure Your FuzzyScan



PROGRAM

Symbology Reading Control

 Code 39/Code 32 Setting 

F_DEFAULT

Family Code Selection

P.C

Parameter Selection

Option Code

Code 39 Family Setting

SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS

Disable Code 39 Enable Code 39 Select Standard Code 39 as primary format  Select Full ASCII Code 39 as primary format Select Code 32 (PARAF, Italian Pharmaceutical) as primary format Disable start/stop symbol transmission  Enable start/stop symbol transmission Disable Code 32 leading A transmission  Enable Code 32 leading A transmission Disable MOD 43 check digit verification  Enable MOD 43 check digit verification Disable check digit transmission  Enable check digit transmission



Disable Code 39 buffering  Enable Code 39 buffering



0 1 2 3 4 5 6 7 8 9 A B C D E

Trioptic Code 39 Setting

SS SS

Disable Trioptic Code 39



Enable Trioptic Code 39

0 1

Code 39 Min. Length

Default (01)



01-Maximum

Scan 2 digits from the option code chart in Appendix; then FuzzyScan will terminate this selection automatically.

FIN

(2 digits)

Code 39 Max. Length

Default (98)



98-Minimum

Scan 2 digits from the option code chart in Appendix; then FuzzyScan will terminate this selection automatically.

FIN

(2 digits)



Trioptic Code 39 and Code 39 Full ASCII cannot be enabled simultaneously.

Page 23

FuzzyScan

Programming Manual

Configure Your FuzzyScan

PROGRAM

Symbology Reading Control

 Code 39 Setting 

F_DEFAULT

Family Code Selection

P.C

Parameter Selection

Option Code

Code 39 Security Level

SS SS SS SS

Level 0 Level 1

Level 2  Level 3



0 1 2 3



Code 39 Security Level

The scanner offers four levels of decode security for Code39 bar codes: Level 0: If you are experiencing misread of poorly-printed or serious out-of-spec. bar codes in level 1, please select level 0. Level 1: If you are experiencing misread of poorly-printed or out-of-spec. bar codes in level 2, please select level 1. Level 2: This is the default setting which allows the scanner to operate fastest, while providing sufficient security in decoding “in-spec” Code39 bar codes. Level 3: If you failed to read poorly-printed or out-of-spec. bar codes in level 2, please select level 3. This is the most aggressive setting and may increase the misread.

Page 24

FuzzyScan

Programming Manual

Configure Your FuzzyScan

PROGRAM

Symbology Reading Control

 Codabar/NW-7 Setting 

F_DEFAULT

Family Code Selection

P.C

Parameter Selection

Option Code

Codabar Setting

SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS

Disable Codabar Enable Codabar  Select Codabar standard format  Select Codabar ABC format Select Codabar CLSI format Select Codabar CX format Disable start/stop symbol transmission  Enable ABCD/ABCD start/stop symbol transmission Enable abcd/abcd start/stop symbol transmission Enable ABCD/TN*E start/stop symbol transmission Enable abcd/tn*e start/stop symbol transmission Disable check digit verification  Enable check digit verification Disable check digit transmission  Enable check digit transmission



0 1 2 3 4 5 6 7 8 9 A B C D E

Codabar Check Digit Settings

SS SS SS SS SS SS SS

Modulus 16



Modulus 10/weight 3 Modulus 11 Modulus 10/weight 2 7 check DR Weight Modulus 11 Runes (Modulus 10/weight 2)

0 1 2 3 4 5 6

Codabar Min. Length

Default (04)



01-Maximum

Scan 2 digits from the option code chart in Appendix; then FuzzyScan will terminate this selection automatically.

FIN

(2 digits)

Codabar Max. Length

Default (98)



98-Minimum

Scan 2 digits from the option code chart in Appendix; then FuzzyScan will terminate this selection automatically.

FIN

(2 digits)

Page 25

FuzzyScan

Programming Manual

Configure Your FuzzyScan

PROGRAM

Symbology Reading Control

 UPC-A & UPC-E Setting 

F_DEFAULT

Family Code Selection

P.C

Parameter Selection

Option Code

UPC Family Setting

SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS

Disable UPC-A Enable UPC-A  Disable UPC-E Enable UPC-E  Disable UPC-E expansion



Enable UPC-E expansion Disable UPC standardization



Enable UPC standardization Disable UPC numeric system Enable UPC numeric system



Disable UPC-A check digit transmission Enable UPC-A check digit transmission



Disable UPC-E check digit transmission Enable UPC-E check digit transmission



Disable UPC “leading 1” portion



Enable UPC “leading 1” portion

0 1 2 3 4 5 6 7 8 9 A B C D E F



When enable UPC-E expansion, the UPC-E decoded data will be converted to UPC-A format and affected by related setting, such as UPC standardization, UPC numeric system, UPC-A check digit transmission.



UPC-E & EAN-8 Expansion : Expand the 8-digit UPC-E and 8-digit ENA-8 to 12-digit UPC-A and 13-digit EAN-13.



UPC-A Standardization : Expand the 12-digit UPC-A to 13-digit EAN-13 with 1 zero insertion.



UPC Lead 1 Numeric System : To read UPC leading with the 1 numeric system, you must enable this option.

WPC Selection

(UPC/EAN/CAN)

Basic Length

Disable

Check Digit

Disable

Numeric System

With 2-digit Addendum

With 5-digit Addendum

Enable

Standardization

Enable

Expansion

UPC-A

- 1

+ 2

+ 5

+ 1

UPC-E

- 1

+ 2

+ 5

+ 1

+ 4

EAN-13

- 1

+ 2

+ 5

EAN-8

- 1

+ 2

+ 5

Page 26

FuzzyScan

Programming Manual

Configure Your FuzzyScan

PROGRAM

Symbology Reading Control

 UPC-A & UPC-E Setting 

F_DEFAULT

Family Code Selection

P.C

Parameter Selection

Option Code

UPC Supplement Setting

SS SS SS SS SS SS SS SS

Select UPC without supplement digits



Select UPC with only 2 supplement digits Select UPC with only 5 supplement digits Select UPC with 2/5 supplement digits Disable force supplement digits output



Enable force supplement digits output UPC Family Addenda Separator Off



UPC Family Addenda Separator On

0 1 2 3 4 5 6 7

UPC/EAN Security Level

SS SS SS

Level 0 Level 1  Level 2

Only available for UPC-A & EAN-13

0 1 2

Supplement Scan Voting

SS SS SS SS SS SS SS SS SS SS SS SS SS SS

None Level 1 Level 2 Level 3  Level 4 Level 5 Level 6 Level 7 Level 8 Level 9 Level 10 Level 11 Level 12 Level 13

0 1 2 3 4 5 6 7 8 9 A B C D

Page 27

FuzzyScan

Programming Manual

Configure Your FuzzyScan



UPC/EAN Security Level

The scanner offers three levels of decode security for UPC/EAN bar codes: Level 0: If you are experiencing misread of poorly-printed or out-of-spec. bar codes, especially in characters 1, 2, 7, and 8 in level 1, please select level 0. Selection of this

security level may significantly impair the decoding ability of the scanner. Level 1: This is the default setting which allows the scanner to operate fastest, while providing sufficient security in decoding “in-spec” UPC/EAN bar codes. Level 2: If you are experiencing misread of poorly-printed, soiled or damage bar codes in level 1, please select level 2. This is the most aggressive setting and may

increase the misread.



The Supplement Scan Voting is the number of times the same UPC/EAN with 2/5 supplement digits has to be decoded before it is transmitted. It is helpful when decoding

a mix of UPC/EAN symbols with and without supplement digits. This function is effective when you select UPC/EAN with only 2 supplement digits, UPC/EAN with only 5 supplement digits or UPC/EAN with 2/5 supplement digits. The default value is Level 3. When you select higher level, it may impact the reading speed on poorly-printed, low contrast or damage barcode labels.

Page 28

FuzzyScan

Programming Manual

Configure Your FuzzyScan

PROGRAM

Symbology Reading Control

 EAN Setting 

F_DEFAULT

Family Code Selection

P.C

Parameter Selection

Option Code

EAN Setting

SS SS SS SS SS SS SS SS SS SS SS SS

Disable EAN-13 Enable EAN-13  Disable EAN-8 Enable EAN-8  Disable EAN-8 expansion



Enable EAN-8 expansion Disable EAN-13 check digit transmission Enable EAN-13 check digit transmission



Disable EAN-8 check digit transmission Enable EAN-8 check digit transmission



Disable ISBN/ISSN Conversion reading check



Enable ISBN/ISSN Conversion reading check

0 1 2 3 4 5 6 7 8 9 A B

EAN Supplement Setting

SS SS SS SS SS SS SS SS

Select EAN without supplement digits



Select EAN with only 2 supplement digits Select EAN with only 5 supplement digits Select EAN with 2/5 supplement digits Disable force supplement digits output



Enable force supplement digits output EAN Addenda Separator Off



EAN Addenda Separator On

0 1 2 3 4 5 6 7

Supplement Scan Voting

SS SS SS SS SS SS SS SS SS SS SS SS SS SS

None Level 1 Level 2 Level 3  Level 4 Level 5 Level 6 Level 7 Level 8 Level 9 Level 10 Level 11 Level 12 Level 13

0 1 2 3 4 5 6 7 8 9 A B C D

Page 29

FuzzyScan

Programming Manual

Configure Your FuzzyScan



The Supplement Scan Voting is the number of times the same UPC/EAN with 2/5 supplement digits has to be decoded before it is transmitted. It is helpful when decoding a mix of UPC/EAN symbols with and without supplement digits. This function is effective when you select UPC/EAN with only 2 supplement digits, UPC/EAN with only 5 supplement digits or UPC/EAN with 2/5 supplement digits. The default value is Level 3. When you select higher level, it may impact the reading speed on poorly-printed, low contrast or damage barcode labels.

Page 30

FuzzyScan

Programming Manual

Configure Your FuzzyScan

PROGRAM

Symbology Reading Control

 EAN Setting 

F_DEFAULT

Family Code Selection

P.C

Parameter Selection

Option Code

UPC/EAN Security Level

SS SS SS

Level 0 Level 1  Level 2

Only available for UPC-A & EAN-13

0 1 2

EAN Supplement Control

SS SS SS SS SS SS SS SS

Disable all specific prefix supplement digital output  Enable all specific prefix supplement digital output Enable 491 Supplement Digit Output Enable 978/979 Supplement Digit Output Enable 977 Supplement Digit Output Enable 378/379 Supplement Digit Output Enable 414/419 Supplement Digit Output Enable 434/439 Supplement Digit Output

0 1 2 3 4 5 6 7



UPC/EAN Security Level The scanner offers three levels of decode security for UPC/EAN bar codes:

Level 0: If you are experiencing misread of poorly-printed or out-of-spec. bar codes, especially in characters 1, 2, 7, and 8 in level 1, please select level 0. Selection of this

increase the misread.



EAN Supplement Control

If you select EAN with only 2, or 5 or 2/5 supplement digits and enable 491 prefix supplement digit output, the scanner will transmit EAN with 2, or 5 or 2/5 supple ment

digits bar codes starting with 491 prefix. The EAN without supplement digit will not be transmitted. If you select EAN with only 2, or 5 or 2/5 supplement digits and enable the other except 491 prefix supplement digit output, the scanner will transmit EAN with 2, or 5, or 2/5 supplement digits bar codes starting with specific prefix. The EAN without supplement digit will be transmitted.

Page 31

FuzzyScan

Programming Manual

Configure Your FuzzyScan

PROGRAM

Symbology Reading Control

 UCC Coupon Extended Code Setting 

F_DEFAULT

Family Code Selection

P.C

Parameter Selection

Option Code

UCC Coupon Extended Code

SS SS

Disable UCC Coupon Extended Code  Enable UCC Coupon Extended Code

0 1



UCC Coupon Extended Code When UCC coupon extended code function is enabled, scanner decodes UPC-A barcodes starting with digit “5”, EAN-13 barcodes starting with digit “99” and GS1-128 Coupon Codes. UPC-A, EAN-13 and EAN-128 must be enabled to scan all types of Coupon Codes.

Page 32

FuzzyScan

Programming Manual

Configure Your FuzzyScan

PROGRAM

Symbology Reading Control

 IATA & Interleaved 2 of 5 Setting 

F_DEFAULT

Family Code Selection

P.C

Parameter Selection

Option Code

IATA Setting

SS SS SS SS SS SS SS SS SS SS SS SS SS

Disable IATA  Enable IATA Select 15-digit fixed length IATA checking  Select variable length IATA Disable check digit verification  Enable check digit automatic verification Enable S/N checking digit verification only Enable CPN checking digit verification only Enable CPN, Airline and S/N check digit verification Disable check digit transmission  Enable check digit transmission Disable start/stop symbol transmission



Enable start/stop symbol transmission

0 1 2 3 4 5 6 7 8 9 A B C

Interleaved 2 of 5 Setting

SS SS SS SS SS SS SS SS SS

Disable Interleaved 2 of 5 Enable Interleaved 2 of 5  Select Interleaved 2 of 5 as primary format  Select German Postal Code as primary format No check character  Validate USS check digit Validate OPCC check digit Disable check digit transmission



Enable check digit transmission

0 1 2 3 4 5 6 7 8

Page 33

FuzzyScan

Programming Manual

Configure Your FuzzyScan

PROGRAM

Symbology Reading Control

 Code 25 Family Setting 

F_DEFAULT

Family Code Selection

P.C

Parameter Selection

Option Code

Code 25 Setting

SS SS SS SS SS SS SS SS SS SS

Disable Standard/Industrial 2 of 5  Enable Standard/Industrial 2 of 5 Disable Matrix 2 of 5  Enable Matrix 2 of 5 Disable China Postal Code  Enable China Postal Code Disable check digit verification



Enable check digit verification Disable check digit transmission  Enable check digit transmission



0 1 2 3 4 5 6 7 8 9

Code 25 Family Min. Length

Default (04)



01-Maximum

Scan 2 digits from the option code chart in Appendix; then FuzzyScan will terminate this selection automatically.

FIN

(2 digits)

Code 25 Family Max. Length

Default (98)



98-Minimum

Scan 2 digits from the option code chart in Appendix; then FuzzyScan will terminate this selection automatically.

FIN

(2 digits)



For Code25 setting, we recommend you to select only one type of Code 25 or set the maximum/minimum bar code length. To decode all types of Code 25 or to variable length of Code 25 will increase the possibility of reading error.

Page 34

FuzzyScan

Programming Manual

Configure Your FuzzyScan

PROGRAM

Symbology Reading Control

 Code 11 & Code 93 Setting 

F_DEFAULT

Family Code Selection

P.C

Parameter Selection

Option Code

Code 11 Setting

SS SS SS SS SS SS SS

Disable Code 11  Enable Code 11 Disable check digit verification  Select 1-check digit verification Select 2-check digit verification Disable check digit transmission



Enable check digit transmission

0 1 2 3 4 5 6

Code 11 Min. Length

Default (04)



01-Maximum

Scan 2 digits from the option code chart in Appendix; then FuzzyScan will terminate this selection automatically.

FIN

(2 digits)

Code 11 Max. Length

Default (98)



98-Minimum

Scan 2 digits from the option code chart in Appendix; then FuzzyScan will terminate this selection automatically.

FIN

(2 digits)

Code 93 Setting

SS SS SS SS

Disable Code 93 Enable Code 93  Disable check digit transmission  Enable check digit transmission

0 1 2 3

Code 93 Min. Length

Default (01)



01-Maximum

Scan 2 digits from the option code chart in Appendix; then FuzzyScan will terminate this selection automatically.

FIN

(2 digits)

Code 93 Max. Length

Default (98)



98-Minimum

Scan 2 digits from the option code chart in Appendix; then FuzzyScan will terminate this selection automatically.

FIN

(2 digits)

Page 35

FuzzyScan

Programming Manual

Configure Your FuzzyScan

PROGRAM

Symbology Reading Control

 MSI/Plessey Setting 

F_DEFAULT

Family Code Selection

P.C

Parameter Selection

Option Code

MSI/Plessey Setting

SS SS SS SS SS SS SS

Disable MSI/Plessy  Enable MSI/Plessy Select MOD 10 check digit



Select MOD 10-10 check digit Select MOD 11-10 check digit Disable check digit transmission  Enable check digit transmission



0 1 2 3 4 5 6

MSI/Plessey Min. Length

Default (04)



01-Maximum

Scan 2 digits from the option code chart in Appendix; then FuzzyScan will terminate this selection automatically.

FIN

(2 digits)

MSI/Plessey Max. Length

Default (98)



98-Minimum

Scan 2 digits from the option code chart in Appendix; then FuzzyScan will terminate this selection automatically.

FIN

(2 digits)

Page 36

FuzzyScan

Programming Manual

Configure Your FuzzyScan

PROGRAM

Symbology Reading Control

 Code 128 Setting 

F_DEFAULT

Family Code Selection

P.C

Parameter Selection

Option Code

Code 128 Setting

SS SS SS SS

Disable Code 128 Enable Code 128  ISBT Concatenation Off



ISBT Concatenation On

0 1 2 3

Code 128 Min. Length

Default (01)



01-Maximum

Scan 2 digits from the option code chart in Appendix; then FuzzyScan will terminate this selection automatically.

FIN

(2 digits)

Code 128 Max. Length

Default (98)



98-Minimum

Scan 2 digits from the option code chart in Appendix; then FuzzyScan will terminate this selection automatically.

FIN

(2 digits)

Code 128 Security Level

SS SS

Level 0 Level 1  0 1



Code 128 Security Level The scanner offers two levels of decode security for Code128 bar codes: Level 0: If you are experiencing misread of poor-printed or out-of-spec. bar code in level1, please select level 0. Level 1: This is the default setting which allows the scanner to operate fastest, while providing sufficient security in decoding "in-spec." Code128 bar codes.

Page 37

FuzzyScan

Programming Manual

Configure Your FuzzyScan

PROGRAM

Symbology Reading Control

GS1-128 Setting 

F_DEFAULT

Family Code Selection

P.C

Parameter Selection

Option Code

GS1-128 Setting

SS SS

Disable GS1-128 Enable GS1-128 

0 1

GS1-128 Min. Length

Default (01)  01-Maximum

Scan 2 digits from the option code chart in Appendix; then FuzzyScan will terminate this selection automatically.

FIN

(2 digits)

GS1-128 Max. Length

Default (98)  98-Minimum

Scan 2 digits from the option code chart in Appendix; then FuzzyScan will terminate this selection automatically.

FIN

(2 digits)

Page 38

FuzzyScan

Programming Manual

Configure Your FuzzyScan

PROGRAM

Symbology Reading Control

 UK/Plessey Setting 

F_DEFAULT

Family Code Selection

P.C

Parameter Selection

Option Code

UK/Plessey Setting

SS SS SS SS SS SS SS SS

Disable UK/Plessey  Enable UK/Plessey Select UK/Plessey Standard Format



Select UK/Plessey CLSI Format Disable Convert X to A-F



Enable Convert X to A-F Disable check digit transmission



Enable check digit transmission

0 1 2 3 4 5 6 7

UK/Plessey Min. Length

Default (04)



01-Maximum

Scan 2 digits from the option code chart in Appendix, then FuzzyScan will terminate this selection automatically.

FIN

(2 digits)

UK/Plessey Max. Length

Default (98)



98-Minimum

Scan 2 digits from the option code chart in Appendix, then FuzzyScan will terminate this selection automatically.

FIN

(2 digits)

Page 39

FuzzyScan

Programming Manual

Configure Your FuzzyScan

PROGRAM

Symbology Reading Control

 Telepen Setting 

F_DEFAULT

Family Code Selection

P.C

Parameter Selection

Option Code

Telepen Setting

SS SS SS SS SS SS

Disable Telepen  Enable Telepen Select Telepen Numeric mode



Select Telepen Full ASCII mode Disable check digit transmission



Enable check digit transmission

0 1 2 3 4 5

Telepen Min. Length

Default (04)



01-Maximum

Scan 2 digits from the option code chart in Appendix, then FuzzyScan will terminate this selection automatically.

FIN

(2 digits)

Telepen Max. Length

Default (98)



98-Minimum

Scan 2 digits from the option code chart in Appendix, then FuzzyScan will terminate this selection automatically.

FIN

(2 digits)

Page 40

FuzzyScan

Programming Manual

Configure Your FuzzyScan

PROGRAM

Symbology Reading Control

 GS1 DataBar Setting 

F_DEFAULT

Family Code Selection

P.C

Parameter Selection

Option Code

GS1 DataBar Setting

SS SS SS SS SS SS

Disable GS1 DataBar (RSS-14) Enable GS1 DataBar (RSS-14)  Disable GS1 DataBar Limited Enable GS1 DataBar Limited  Disable GS1 DataBar Expanded Enable GS1 DataBar Expanded 

0 1 2 3 4 5

GS1 DataBar Limited

Security Level

SS SS SS

Level 1 Level 2 Level 3



Only available for GS1 DataBar Limited

Only available for F460, F560 scanners.

0 1 2

GS1 DataBar Min. Length

Default (04)



01-Maximum

Only available for GS1 DataBar Expanded Scan 2 digits from the option code chart in Appendix; then FuzzyScan will terminate

this selection automatically.

FIN

(2 digits)

GS1 DataBar Max. Length

Default (74)



74-Minimum

Only available for GS1 DataBar. Expanded Scan 2 digits from the option code chart in Appendix; then FuzzyScan will terminate this selection automatically.

FIN

(2 digits)



GS1 128 Limited Security Level The scanner F460/F560 offers three levels of decode security for GS1 DataBar Limited bar codes:

Level 1: If you failed to read poorly-printed or out-of-spec. bar codes in level 2, please select level 1. This is the most aggressive setting and may increase the misread. Level 2: If you are experiencing misread of poor-printed or out-of-spec. bar code in level 3, please select level 2. Level 3: This is the default setting which allows the scanner to operate fastest, while providing sufficient security in decoding "in-spec." GS1 128 Limited” bar codes.

Page 41

FuzzyScan

Programming Manual

Configure Your FuzzyScan

PROGRAM

Symbology Reading Control

 Composite Codes, Codablock F

PDF417/MicroPDF417 & Setting 

F_DEFAULT

Family Code Selection

P.C

Parameter Selection

Option Code

Composite Codes Setting

SS SS SS SS

Disable composite codes  Enable composite codes UPC Composite Mode: UPC never linked  UPC Composite Mode: UPC always linked

If UPC Composite Mode: UPC never linked is selected, UPC barcodes are transmitted whether MicroPDF417 symbol is detected or not.

If UPC Composite Mode: UPC always linked is selected, UPC barcodes are only transmitted when the MicroPDF417 is detected.

0 1 2 3

Codablock F Setting

SS SS

Disable



Enable



0 1

PDF417/Micro PDF417 Setting

SS SS SS SS

Disable PDF417 Enable PDF417  Disable MicroPDF417  Enable MicroPDF417

0 1 2 3

Page 42

FuzzyScan

Programming Manual

Configure Your FuzzyScan

PROGRAM

Symbology Reading Control

 Code 16K & Code 49 Setting 

F_DEFAULT

Family Code Selection

P.C

Parameter Selection

Option Code

Code 16K Setting

SS SS

Disable Code 16K  Enable Code 16K 0 1

Code 16K Min. Length

Default (01)



01-Maximum

Scan 3 digits from the option code chart in Appendix; then FuzzyScan will terminate this selection automatically.

FIN

(3 digits)

Code 16K Max. Length

Default (160)



160-Minimum

Scan 3 digits from the option code chart in Appendix; then FuzzyScan will terminate this selection automatically.

FIN

(3 digits)

Code 49 Setting

SS SS

Disable Code 49  Enable Code 49 0 1

Code 49 Min. Length

Default (01)



01-Maximum

Scan 2 digits from the option code chart in Appendix; then FuzzyScan will terminate this selection automatically.

FIN

(2 digits)

Code 49 Max. Length

Default (81)



81-Minimum

Scan 2 digits from the option code chart in Appendix; then FuzzyScan will terminate this selection automatically.

FIN

(2 digits)

Page 43

FuzzyScan

Programming Manual

Configure Your FuzzyScan

PROGRAM

Symbology Reading Control

 QR Code Setting 

F_DEFAULT

Family Code Selection

P.C

Parameter Selection

Option Code

QR Code Setting

SS SS

Disable QR Code



Enable QR Code  Disable MicroQR Code



Enable MicroQR Code  Disable QR Code Append Enable QR Code Append  Disable QR Code Inverse Reading Enable QR Code Inverse Reading Auto detect QR Code Inverse Reading

0 1 2 3

4 5

6 7 8

QR Code Min. Length

Default (01)



01-Maximum

Scan 4 digits from the option code chart in Appendix; then FuzzyScan will terminate this selection automatically.

FIN

(4 digits)

QR Code Max. Length

Default (7089)



7089-Minimum

Scan 4 digits from the option code chart in Appendix; then FuzzyScan will terminate this selection automatically.

FIN

(4 digits)

Page 44

FuzzyScan

Programming Manual

Configure Your FuzzyScan

PROGRAM

Symbology Reading Control

 Data Matrix Setting 

F_DEFAULT

Family Code Selection

P.C

Parameter Selection

Option Code

Data Matrix Setting

SS SS SS SS SS SS SS SS

Disable Data Matrix Enable Data Matrix  Disable Data Matrix Inverse Reading Enable Data Matrix Inverse Reading Auto Detect Data Matrix Inverse Reading  Disable Data Matrix Mirror Images Enable Data Matrix Mirror Images Auto Detect Data Matrix Mirror Images 

0 1 4 5 6 7 8 9

Data Matrix Min. Length

Default (01)



01-Maximum

Scan 4 digits from the option code chart in Appendix; then FuzzyScan will terminate this selection automatically.

FIN

(4 digits)

Data Matrix Max. Length

Default (3116)



3116-Minimum

Scan 4 digits from the option code chart in Appendix; then FuzzyScan will terminate this selection automatically.

FIN

(4 digits)

Small DM Code Reading

SS SS SS

Standard



Level 1 Level 2

0 1 2



Small DM Code Reading:

When small DataMatrix code can’t be read by 2D scanner, you can select "Level 1” or “Level 2” to improve the scanner's ability to read small DataMatrix code. The scanner’s snappiness decreased when you select “Level 1” or “Level 2”. The higher level will take longer time to read the small DataMatrix barcode.



Small DM Code Reading: Available firmware: A780 / A680 1.00.01 and above

A770 1.00.24 and above; 2.00.08 and above A670 1.00.05 and above

Page 45

FuzzyScan

Programming Manual

Configure Your FuzzyScan

PROGRAM

Symbology Reading Control

MaxiCode Setting 

F_DEFAULT

Family Code Selection

P.C

Parameter Selection

Option Code

MaxiCode Setting

Disable MaxiCode 

Enable MaxiCode 0 1

MaxiCode Min. Length

Default (01)



01-Maximum

Scan 3 digits from the option code chart in Appendix, then FuzzyScan will terminate this selection automatically.

FIN

(3 digits)

MaxiCode Max. Length

Default (150)



150-Minimum

Scan 3 digits from the option code chart in Appendix, then FuzzyScan will terminate this selection automatically.

FIN

(3 digits)

Page 46

FuzzyScan

Programming Manual

Configure Your FuzzyScan

PROGRAM

Symbology Reading Control

 Aztec Code Setting 

F_DEFAULT

Family Code Selection

P.C

Parameter Selection

Option Code

Aztec Code Setting

SS SS

Disable Aztec Code Enable Aztec Code 

0 1

Aztec Code Min. Length

Default (01)  01-Maximum

Scan 4 digits from the option code chart in Appendix; then FuzzyScan will terminate this selection automatically.

FIN

(4 digits)

Aztec Code Max. Length

Default (3832)  3832-Minimum

Scan 4 digits from the option code chart in Appendix; then FuzzyScan will terminate this selection automatically.

FIN

(4 digits)

Page 47

FuzzyScan

Programming Manual

Configure Your FuzzyScan

PROGRAM

Symbology Reading Control

 Australian Post, US Planet, US Postnet,

British Post & Japan Post Setting 

F_DEFAULT

Family Code Selection

P.C

Parameter Selection

Option Code

Australian Post Setting

SS SS SS SS SS SS

Disable Australian Post  Enable Australian Post Raw format Output  Numeric Encoding Output (N Encoding Table) Alphanumeric Encoding Output (C Encoding Table) Auto-discriminate Output (Combination C & N Encoding Table)

0 1 2 3 4 5

US Planet Setting

SS SS SS SS

Disable US Planet  Enable US Planet Disable Check Digit Transmission  Enable Check Digit Transmission

0 1 2 3

US Postnet Setting

SS SS SS SS

Disable US Postnet  Enable US Postnet Disable Check Digit Transmission  Enable Check Digit Transmission

0 1 2 3

British Post Setting

SS SS SS SS

Disable British Post  Enable British Post Disable Check Digit Transmission  Enable Check Digit Transmission

0 1 2 3

Japan Post Setting

SS SS

Disable Japan Post  Enable Japan Post 0 1



Australian Post Setting: Auto-discriminate output option increase the risk of misread because the encoded data format does not specify the Encoding Table used for

encoding.

Page 48

FuzzyScan

Programming Manual

Configure Your FuzzyScan

PROGRAM

Symbology Reading Control

 Netherlands KIX Code, Intelligent Mail

& Korea Post Code Setting 

F_DEFAULT

Family Code Selection

P.C

Parameter Selection

Option Code

Netherlands KIX Code Setting

SS SS

Disable Netherlands KIX Code



Enable Netherlands KIX Code

0 1

Intelligent Mail Setting (USPS 4CB/One Code)

SS SS

Disable Intelligent Mail  Enable Intelligent Mail

0 1

Korea Post Code Setting

SS SS

Disable  Enable Length fixed in 6 characters.

0 1

Page 49

FuzzyScan

Programming Manual

Configure Your FuzzyScan

PROGRAM

Keyboard Interface Control

 Keyboard Layout (Language) Setting 

F_DEFAULT

Family Code Selection

P.C

Parameter Selection

Option Code

Keyboard Layout

SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS

USA (QWERTY)



France (AZERTY) Germany (QWERTZ) United Kingdom - UK (QWERTY) Canadian French (QWERTY) Spain (Spanish, QWERTY) Sweden/Finland (QWERTY) Portugal (QWERTY) Norway (QWERTY) Spain (Latin America, QWERTY) Italy (QWERTY) Netherlands (QWERTY) Denmark (QWERTY) Belgium (AZERTY) Switzerland-Germany (QWERTZ) Iceland (QWERTY) Japan (DOS/V) Czech (QWERTY)

00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17



Please refer to the ASCII/HEX Table listed in the Appendix to determine HEX codes for characters, symbols, and functions to be used as preamble or postamble.



To set preamble or postamble as function key output, you must enable the “Function Key Emulation” feature as listed in page 3-25 first.



Keyboard Interface Message String :

Preamble

Data Length

Prefix Symbol ID

Scanned Data

Suffix Symbol ID

Postamble

Record Suffix

1-15 characters

2-4 digits

1 or 3 characters

Variable length

1 or 3 characters

1-15 characters

1 character

Page 50

FuzzyScan

Programming Manual

Configure Your FuzzyScan

PROGRAM

Keyboard Interface Control

 Record Suffix, Preamble, Postamble,

FNC1 Transmit & Caps Lock 

F_DEFAULT

Family Code Selection

P.C

Parameter Selection

Option Code

Record Suffix

SS SS SS SS SS SS

None RETURN



TAB SPACE ENTER (Numeric Key Pad) User defined character (1 character)

0 1 2 3 4

5, (00-7F)

Preamble

None



1-15 characters

Maximum 15-character input; scan “FIN” to terminate this selection.

FIN

[00-7F], [FIN]

Postamble

None



1-15 characters

Maximum 15-character input; scan “FIN” to terminate this selection.

FIN

[00-7F], [FIN]

FNC1 Symbol Char. Transmit

SS SS

Disable Enable



0 1

Caps Lock Control

SS SS SS

“Caps Lock Off” State



“Caps Lock On” State Auto Detect (PC/AT, PS/2, Keyboard Replacement and DOS/V Machines only)

0 1 2

Caps Lock Release Control

SS SS

“Caps Lock On, Caps Off” 

“Caps Lock On, Shift Off”

0 1

Page 51

FuzzyScan

Programming Manual

Configure Your FuzzyScan



FNC1 Symbol Char. Transmit: When this function is enabled and the FNC1 is contained in scanned data, the scanner transmits the FNC1 to the host. Chart of theFNC1 is provided in Appendix- Keyboard Function Code Table. When the scanner interface is set to keyboard, the scan code is converted to corresponding key function before it is transmitted.



The function of “Caps Lock Control” and “Key Pad Emulation” are only available for IBM PC/AT, PS/VP, PS/2 series personal computers and compatible machines. While selecting the other host interfaces, these selections don’t perform the above functions for you.



Please check the actual Caps Lock state in use while software application is running. If the Caps Lock state is off, select “Caps Lock Off” state, and then FuzzyScan will perform normal data transmission. If the Caps Lock state is on, select “Caps Lock On” state. Select “Auto Detect”, FuzzyScan will perform special transmission

handshaking without changing the status of Caps Lock switch.

Page 52

FuzzyScan

Programming Manual

Configure Your FuzzyScan

PROGRAM

Keyboard Interface Control

 Delay Setting 

F_DEFAULT

Family Code Selection

P.C

Parameter Selection

Option Code

Intermessage Delay

None



1-99 (x5) msec.

Scan 2 digits from the option code chart in Appendix; then FuzzyScan will terminate this selection automatically.

FIN

(2 digits)

Intercharacter Delay

None



1-99 (x5) msec.

Scan 2 digits from the option code chart in Appendix; then FuzzyScan will terminate this selection automatically.

FIN

(2 digits)

Interfunction Delay

None



1-99 (x5) msec. Scan 2 digits from the option code chart in Appendix; then FuzzyScan will terminate

this selection automatically.

FIN

(2 digits)



Intermessage Delay is a time delay between messages output by FuzzyScan. Increasing this delay will help host applications process the incoming data on time.



Intercharacter Delay is a time delay between data characters output by FuzzyScan. These two parameters are used to synchronize data communication when : 1) the data

transmission speed is too fast, characters may be skipped; 2) multitasking operation system or host computers in a network may slow down the keyboard handling; 3)

various notebook or desktop PC systems require different timing parameter settings. Please always add one extra unit as safety margin when adjusting these two

parameters.



Interfunction Delay is a time delay of transmission of segments in each message string.

Page 53

FuzzyScan

Programming Manual

Configure Your FuzzyScan

PROGRAM

Keyboard Interface Control

 Emulation Setting, Key Pad Emulation &

Upper/Lower Case Setting , Dollar Sign Control

F_DEFAULT

Family Code Selection

P.C

Parameter Selection

Option Code

Function Key Emulation

SS SS

Enable ASCII 00-31 code as keyboard function code output



Ctrl-Output Refer to Appendix – Keyboard Function Code Table for details.

0 1

Key Pad Emulation

SS SS

Disable key pad emulation



Enable numeric output as key pad (Num Lock On) output

0 1

Upper/Lower Case

SS SS SS SS

Normal case (neglect the upper/lower case control)



Inverse case (change all characters output to inverse case) Upper case (force all characters output as upper case) Lower case (force all characters output as lower case)

0 1 2 3

Dollar Sign Control

SS SS SS SS SS

Dollar sign output as “ $ “  Dollar sign output as “￥“ Dollar sign output as “ € “ Dollar sign output as “ £ “ Dollar sign output as “ ¢ “

0 1 2 3 4

Page 54

FuzzyScan

Programming Manual

Configure Your FuzzyScan

PROGRAM

Serial Interface Control

 Record Suffix, Preamble ,Postamble Setting 

F_DEFAULT

Family Code Selection

P.C

Parameter Selection

Option Code

STX/ETX Control

SS SS

Disable STX/ETX transmission



Enable STX/ETX transmission STX/ETX are two characters used to indicate the starting and ending of the total

data frame transmitted via serial interface.

0 1

Record Suffix

SS SS SS SS SS SS

None CR (0DH)



LF (0AH) CRLF (0D0AH) TAB (09H) SPACE (20H)

0 1 2 3 4 5

Preamble

None



1-15 characters Maximum 15-character input; scan “FIN” to terminate this selection.

FIN

[00-7F], [FIN]

Postamble

None



1-15 characters

Maximum 15-character input; scan “FIN” to terminate this selection.

FIN

[00-7F], [FIN]

FNC1 Symbol Char. Transmit

SS SS

Disable Enable



When this function is enabled and the FNC1 is contained in scanned data, the scanner transmits the FNC1 to the host. Chart of the FNC1 is provided in Appendix – Keyboard Function Code Table. When the scanner interface is set to keyboard, the scan code is converted to corresponding key function before it is transmitted

0 1



Serial Interface Message String (RS232, USB COM) :

STX

Preamble

Data Length

Prefix Symbol ID

Scanned Data

Suffix Symbol ID

Postamble

ETX

Record Suffix

1 character

1-15 characters

2-4 digits

1 or 3 characters

Variable length

1 or 3 characters

1-15 characters

1 character

Page 55

FuzzyScan

Programming Manual

Configure Your FuzzyScan

PROGRAM

Serial Interface Control

 Delay Setting 

F_DEFAULT

Family Code Selection

P.C

Parameter Selection

Option Code

Intermessage Delay

None



1-99 (x5) msec.

Scan 2 digits from the option code chart in Appendix; then FuzzyScan will terminate this selection automatically.

FIN

(2 digits)

Intercharacter Delay

None



1-99 (x5) msec.

Scan 2 digits from the option code chart in Appendix; then FuzzyScan will terminate this selection automatically.

FIN

(2 digits)

Interfunction Delay

None



1-99 (x5) msec.

Scan 2 digits from the option code chart in Appendix; then FuzzyScan will terminate this selection automatically.

FIN

(2 digits)



Intermessage Delay is a time delay between messages output by FuzzyScan. Increasing this delay will help host applications process the incoming data on time.



Intercharacter Delay is a time delay between data characters output by FuzzyScan. These two parameters are used to synchronize data communication when : 1) the data

transmission speed is too fast, characters may be skipped; 2) multitasking operation system or host computers in a network may slow down the keyboard handling; 3)

various notebook or desktop PC systems require different timing parameter settings. Please always add one extra unit as safety margin when adjusting these two

parameters.



Interfunction Delay is a time delay between transmission and reception of each segment of the message string.

Page 56

FuzzyScan

Programming Manual

Configure Your FuzzyScan

PROGRAM

Serial Interface Control

 Protocol, ACK/NAK Setting 

F_DEFAULT

Family Code Selection

P.C

Parameter Selection

Option Code

Handshaking Protocol

SS SS SS SS

None (free running mode)



RTS/CTS (hardware handshaking) ACK/NAK (software handshaking) Xon/Xoff (software handshaking)

0 1 2 3

NAK Retry Count

SS SS

3 times  0~255 times

FIN

(3 digits)

ACK Indication

SS SS SS SS

Disable ACK Time-out Indication Enable ACK Time-out Indication



Disable ACK Indication  Enable ACK Indication

0 1 2 3



USB COM doesn’t support RTS/CTS handshaking protocol.



When the ACK/NAK Software Handshaking option is selected, the FuzzyScan waits for an ACK (acknowledge) or NAK (not acknowledge) from the host computer after each data transmission. If the NAK is received, FuzzyScan will re-send the data until receiving ACK.’



NAK Retry Count

After transmitting data, the scanner expects a NAK response from the host up to the preset “Serial Response Time-out”. If the scanner doesn’t get a response, the scanner

will issue an error indication and discard the data. When a NAK is received, the scanner transmits the same data again and waits for either an ACK or NAK. The scanner

issues an error indication and discards the data under following two conditions:

1) After preset NAK retry counts is received within the preset serial response time-out.

2) If the preset time-out is up but the preset NAK retry counts haven’t come to the end.

The default retry counts are three times. If you program “0 time”, the scanner won’t resend the data to the host when the scanner receives a NAK. The scanner will discard

the data. If you program “255 times”, the scanner can receive unlimited NAKs from the host within the pre-set serial response time-out.

This function is not available for batch mode. When you enable this function in on-line mode, the out-of-range function will be disable automatically.



ACK Indication:

Disable: There’s neither LED nor beeping indication for this setting.

Enable: There’s a specific LED and beeping indication for this setting.

Page 57

FuzzyScan

Programming Manual

Configure Your FuzzyScan

PROGRAM

Serial Interface Control

Response Time-out Setting, Baud Rate, Data Frame

F_DEFAULT

Family Code Selection

P.C

Parameter Selection

Option Code

Serial Response Time-out

SS SS SS SS SS SS

None 200 mseconds 500 mseconds



800 mseconds 1 second 2 seconds

3 seconds 4 seconds 5 seconds 8 seconds 10 seconds 15 seconds

0 1 2 3 4 5

6 7 8

9 A B

Baud Rate (BPS)

SS SS SS SS

38.4K BPS

19.2K BPS 9600 BPS



4800 BPS

2400 BPS 1200 BPS

57.6K BPS

115.2K BPS

0 1 2

Data Frame

SS SS SS SS SS SS SS SS

8, None, 1



8, Odd, 1 8, Even, 1 8, Space, 1 8, Mark, 1 8, None, 2 7, Odd, 1 7, Even, 1

7, Space, 1 7, Mark, 1 7, None, 2 7, Odd, 2 7, Even, 2 7, Space, 2 7, Mark, 2

0 1 2 3 4 5 6 7

9 A B C D E



When the RTS/CTS Hardware Handshaking option is selected, the RTS (request to send) and CTS (clear to send) signals will be issued before normal data communication. This option is very helpful to ensure the reliability of data communication.



The Serial Response Time-out is a pre-defined delay time for FuzzyScan to wait for handshaking, acknowledgment or non-acknowledgment from the host computer

Page 58

FuzzyScan

Programming Manual

Configure Your FuzzyScan

PROGRAM

Wand/Laser Emulation Control

(F & L Series)

Output Polarity, Signal State, Margin/Module Time 

F_DEFAULT

Family Code Selection

P.C

Parameter Selection

Option Code

Output Polarity

SS SS

High level (5Vdc) on Bar (low level on Space)



Low level (0Vdc) on Bar (high level on Space)

Determine the output voltage level for both bar and space.

0 1

Initial Signal State

SS SS

High Level (5Vdc)



Low Level (0Vdc)

Determine the initial state of output voltage level.

0 1

Margin Time

SS SS SS SS SS

10 msec. 15 msec. 20 msec.



25 msec. 30 msec.

0 1 2 3 4

Module Time

SS SS SS SS

Extremely short Short Medium  Long

0 1 2 3

Narrow/Wide Ratio

SS SS SS

1:2



1:2.5 1:3

0 1 2

Page 59

FuzzyScan

Programming Manual

Configure Your FuzzyScan

PROGRAM

Wand/Laser Emulation Control

(F & L Series)

Output Polarity, Signal State, Margin/Module Time 

F_DEFAULT

Family Code Selection

P.C

Parameter Selection

Option Code

Code 39/Code 128 Emulation

SS SS SS SS SS

Disable standard Code 39 emulation  Enable standard Code 39 skip emulation Enable standard Code 39 replace emulation Enable Full ASCII Code 39 emulation Enable Code 128 emulation

0 1 2 3 4



[ Code 39 Skip] : When this option is selected, all scanned data will be translated as Standard Code 39 wand/laser emulation output. If any lower case characters are read,

they will be translated to upper case characters. Any other characters that are not available in Code 39 symbology set will be skipped.



[ Code 39 Replace] : Any character not normally available in the standard Code 39 symbology set, will be translated as Space.

Page 60

FuzzyScan

Programming Manual

Configure Your FuzzyScan

PROGRAM

Operation Control

(F & L Series)

 Operation Mode Setting 

F_DEFAULT

Family Code Selection

P.C

Parameter Selection

Option Code

Operation Mode

SS SS SS SS SS SS SS SS SS

Low Power mode Trigger mode



Presentation mode Alternative mode Flash mode Force mode Toggle mode Diagnostic mode Level mode

0 1 2 3 4 5 6 7 8



Low Power Mode (Low Power Triggering): The scanner goes into idle state after scanning the bar code. You must press the trigger to wake up the scanner for operation.

It is very helpful for mobile data collection and application, which are concerned with power saving.



Trigger Mode (External Triggering): The scanner goes into standby state after scanning the bar code. You must press the trigger to turn on the light source of the scanner

before scanning the bar code.



Presentation Mode (Auto Detection): Presentation mode uses ambient light to detect the bar codes. The light source is off until the scanner detects an image which is

similar to a barcode. Then the light source turns on automatically to read the bar code. If the light level in the room is not high enough, Presentation Mode may not work properly. You can choose different level of “Presentation Sensitivity” to meet your application (Please refer to the setting of “Presentation Sensitivity”).



Alternative Mode (Periodic Power Off) :The scanner keeps the light source of the scanner turned on till the pre-defined light source on time is up. After the scanner turns

off the light source, you must press the trigger to turn on the light source again. After each good read, the timer counter of “Light Source on Time” is reset. For you do not have to press the trigger frequently, it is very convenient for multiple scanning.



Flash Mode (Pulse Driven Reading): The scanner flashes the light source of the scanner without using the trigger. If the scanner detects an image which is similar to a bar

code, the scanner forces on the light source automatically and scans the bar code. Flash Duty Cycle adjustment can change the frequency of the blinking.



Force Mode (Continued Power On): The light source of the scanner is forced on for continued operation without pressing the trigger switch. This mode is convenient for

high speed bar code reading.



Toggle Mode (Repeat Reading): The toggle mode is very similar to the Alternative Mode but without the pre-defined light source on time concern. You must press the

trigger to turn on the light source of the scanner to scan. The scanner keeps the light source turned on until you press the trigger again.



Diagnostic Mode (Test Reading): This operation mode is specifically designed for diagnostic purposes. When this operation mode is selected, the light source of the

scanner is force on without regard for other programmable parameters, such as reread delay, redundancy, and so forth.



Level Mode (Auto Power Off): When this operation mode is selected, the scanner continues to turn on the light source of the scanner before a good read or pre-defined

“Light Source on Time”. If the scanner decodes a bar code successfully, it turns off the light source immediately. After the scanner turns off the light source, you must press the trigger to turn on the light source again. If there is no scanning operation performed during the pre -defined light source on time, the scanner enters the idle state after the pre-defined light source on time is up.



FuzzyScan Laser model only have LED illumination (without laser aiming line) in Flash/ Force/Toggle/ Diagnostics Modes.

Page 61

FuzzyScan

Programming Manual

Configure Your FuzzyScan

PROGRAM

Operation Control

(F & L Series)

Presentation Control, Scan Rate, Flash Duty 

F_DEFAULT

Family Code Selection

P.C

Parameter Selection

Option Code

Presentation Control

SS SS SS

Presentation mode  Flash mode Force mode

0 1 2

Scan Rate Control

SS SS

Dynamic  Fixed

0 1

Flash Duty Cycle

SS SS SS SS

1/2 duty cycle



2/3 duty cycle 3/4 duty cycle 4/5 duty cycle

L680/L780 laser imagers don’t support this function.

0 1 2 3

SmartStand Power Off Timeout

SS SS SS

3 mins  5 mins 10 mins

Only available for FuzzyScan Laser model

0 1 2



Presentation Control: When the scanner is placed on SmartStand, the scanner will be switched from hand-held scanning to hands free scanning automatically. Three

hands scanning modes are available. You are recommended to use flash mode or force mode while under insufficient ambient light.



Scan Rate Control: The scanner will have better motion tolerance when you select “Fixed” scan rate. It’s suitable for application which needs higher motion tolerance on

the move. But this may impact to the reading distance.



The Flash Duty Cycle is designed to control the flashing frequency of the light source.



The SmartStand Power Off Timeout is a pre-defined duration for scanner’s light source on time when the scanner is placed on SmartStand. While the scanner is placed on

SmartStand, the scanning-type will be switched from hand-held scanning to presentation scanning and the light source will be forced on automatically. The light source will be off when the pre-defined duration is up.

Page 62

FuzzyScan

Programming Manual

Configure Your FuzzyScan

PROGRAM

Operation Control

(L Series)

Laser Imager, LED Illumination Control 

F_DEFAULT

Family Code Selection

P.C

Parameter Selection

Option Code

LED Illumination Control

SS SS

Always on Intelligent Mode





Only available for L Series.

0 1

LED Illumination Delay

SS SS SS SS SS

100 ms 150 ms  200 ms 250 ms 300 ms

Only available for L Series.

0 1 2 3 4



LED Illumination Control: When you enable “always on“, the LED illumination will be always on when you press the trigger. When you enable “intelligent mode”, the scanner will emit the laser aiming line first, the LED illumination will be turned on after the preset LED illumination delay. Intelligent mode is recommended to be used in regular ambient light environment.

Page 63

FuzzyScan

Programming Manual

Configure Your FuzzyScan

PROGRAM

Operation Control

(F & L Series)

 Laser Aiming Control , 1D Barcode Reading Direction

F_DEFAULT

Family Code Selection

P.C

Parameter Selection

Option Code

Laser Aiming Control

SS SS

Disable Enable 

Only available for L Series.

1D Barcode Forward-reading

Indication

SS SS

None ◆ “S”

User defined character(1 character)

2 〔00-7F〕

1D Barcode Backward-reading

Indication

SS SS

None “X” ◆

User defined character(1 character)

2 〔00-7F〕

1D Barcode Direction

Indication Transmission

SS SS SS SS

Disable



Enable prefix direction mark transmission Enable suffix direction mark transmission Enable both prefix and suffix direction mark transmission

0 1 2 3



Laser Aiming Control: You can disable or enable laser aiming line when you scan PDF barcode.

Page 64

FuzzyScan

Programming Manual

Configure Your FuzzyScan

PROGRAM

Operation Control

(A Series)

 Operation , Presentation and Illumination Control

F_DEFAULT

Family Code Selection

P.C

Parameter Selection

Option Code

Operation Mode

SS SS SS SS SS SS SS SS SS

Low Power mode (Low power triggering) Trigger mode (External triggering)



Presentation mode (Auto detection) Alternative mode (Periodic power off) Force mode (Continued power on) Toggle mode (Repeat reading) Diagnostic mode (Test reading) Level mode (Auto power off) Multiple Read Mode

0 1 2 3 4 5 6 7 8

Presentation Control

SS SS

Presentation mode  Force mode 0 1

Illumination Control

SS SS

Disable Enable 



Presentation Background Lighting

SS SS

LEDs Off LEDs On





Hand-Held Mode: Low power mode, Trigger mode, Alternative mode, Toggle mode, Level mode, Multiple read mode



Hand-Free Mode: Presentation mode, Force mode,



The Illumination Control is only available for hand-held mode.



Presentation Background Lighting Control: You can enable or disable presentation background lighting of the scanner according to the ambient light condition in presentation mode. When the ambient light is dim or dark, you can enable this function to turn on the scanner’s LED illumination at a dim level. This is helpful for scanner to detect the motion of scene.

Page 65

FuzzyScan

Programming Manual

Configure Your FuzzyScan

PROGRAM

Operation Control

(A Series)

Aiming Control, Delay Aiming & Decode Aiming Control 

F_DEFAULT

Family Code Selection

P.C

Parameter Selection

Option Code

Aiming Control

SS SS SS

Regular Aiming Intelligent Aiming  Delay Aiming Control

0 1 2

Delay Aiming Time-out Control

SS SS SS SS SS SS SS SS

200 ms 400 ms



800 ms 1 sec

1.5 secs. 2 secs. 3 secs. 4 secs.

0 1 2 3 4 5 6 7

Decode Aiming Control

SS SS

Disable in Hand-Held mode Enable in Hand-Held mode



Disable in Hand-Free mode Enable in Hand-Free mode 

0 1 2 3



The Aiming Control is only available for trigger mode. In Intelligent Aiming, the aiming light is turned on when the scanner is lifted. A trigger pull activates decoding process.

After 2 seconds of inactivity, the aiming light will be shut off. Delay Aiming Control allows a delay time for the operator to aim the scanner before the image is taken. During the delay time, the aiming light will be on, but the LED illumination won’t be turned on until the delay time is up.



The Delay Aiming Time-out Control is only available for trigger mode. You can use Delay Aiming Time-out Control to set the delay time.

Page 66

FuzzyScan

Programming Manual

Configure Your FuzzyScan

PROGRAM

Operation Control

(A Series)

 Center Alignment, Unique Bar Code Reporting 

F_DEFAULT

Family Code Selection

P.C

Parameter Selection

Option Code

Center Alignment

SS SS

Disable in Hand-Held Mode



Enable in Hand-Held Mode Disable in Hand-Free Mode



Enable in Hand-free Mode

0 1 2 3

Unique Bar Code Reporting

SS SS

Disable



Enable 0 1



Center Alignment: When this function is enabled, the scanner only decodes barcode(s) around aiming line.



Unique Bar Code Reporting: When this function is enabled, the scanner only outputs unique barcode when the trigger is pressed. This function is workable when Multiple

Read mode is selected.

Page 67

FuzzyScan

Programming Manual

Configure Your FuzzyScan

PROGRAM

Operation Control

(A Series)

Batch Reading 

F_DEFAULT

Family Code Selection

P.C

Parameter Selection

Option Code

Batch Reading

None  Batch Reading rule input ( 01-16 rules)

[FIN]

[Rules] [FIN]



Batch Reading: When this function is enabled, you can scan multiple barcodes one by one continuously upon one trigger event. The scanner reports a good read beep and

indication only if all bar codes set by the “Batch Reading Rule” are read. Otherwise, the scanner reports an error beep and indication. The scanned data will be transmitted according to the preset sequence which is defined in “Batch Reading Rule” regardless the scanned order of those barcodes.

- Batch Reading function is only available Trigger Mode.

Batch Reading is not available when Multiple Read Mode or Center Alignment is turned on.



Batch Reading Rule:

- To set the Batch Reading rule

1. Scan the PROGRAM symbol.

2. Scan the Batch Reading symbol (Family Code).

3. Use the Option Code to define the preset Batch Reading rule.

4. Scan the FIN symbol.

5. Scan the END symbol to save your Batch Reading rule. Note: Scan the ABORT and END symbol to exit without saving any Batch Reading rule setting.

- When you scan “None”, the preset Batch Reading Rule will be cancelled.

- Batch Reading Rule Syntax:

[n] [Element 1] FF [Element 2] FF [Element 3] FF …[Element n] FF Where n is the number of elements in the overall rule. The number of elements is up to 16.FF indicates the end of one element.

- Element structure:

[Cino ID Hex value] [Code length] [Character match(es)]

Where:  [Cino ID Hex value]

Length: 2 byte Please find Cino ID hex value from Symbology ID Table in appendix. Locate the Hex value for the symbology and scan the 2 digit hex values from the Option Code.

Note: 99 is the universal number, indicating all symbologies.

Page 68

FuzzyScan

Programming Manual

Configure Your FuzzyScan

 [Code length]

Length: 4 byte Specify what length of data output will be acceptable for this symbology. When you calculate the length, you must consider the whole data string which includes the programmed Preamble, Postamble, Scanned Data Length, Prefix/Suffix Symbol ID or AIM ID. Scan the four digit data length from the Option Code.

Note: 40 characters is entered as 0040; 9999 is a universal number, indicating all lengths.

 [Character match]

Length: 2-8 byte You can refer to HEX/ASCII Reference Table to find the Hex value that represents the character(s) you want to match. Use the Option Code to scan the alphanumeric combination that represents the ASCII characters. You can match up to 4 characters which are counted from the start character of the whole Data String. Note: When setting the matched character(s), you must match the content of the whole Data String, including the programmed Preamble, Postamble, Scanned

Data Length, Prefix/Suffi Symbol ID OR AIM ID if you had defined. FF is the universal character, indicating all characters.

- Batch Reading rule example In this example, you are scanning Code 39, Code 128, and Code 93 bar codes, but you would like to output the data in following sequence: Code 128 - Code 39 - Code 93

B-CODE39

A-CODE128

C-CODE93

Page 69

FuzzyScan

Programming Manual

Configure Your FuzzyScan

You would set up the Batch Reading rule with the following command line:

[PROGRAM] [Batch Reading] [0301999941FF07999942FF09999943FF] [FIN] [END] The breakdown of the command line is shown below:

The number of elements in the overall rule

Code identifier of Code 128

9999

Code length that must match for Code 128, 9999 = all lengths

Start character match for Code 128, 41h = “A”

End of first code

Code identifier of Code 39

9999

Code length that must match for Code 39, 9999 = all lengths

Start character that must match for Code 39, 42h = “B”

End of second code

Code identifier of Code 93

9999

Code length that must match for Code 93, 9999 = all lengths

Start character match for Code 93, 43h = “C”

End of third code

To program the previous example using specific lengths, you would have to count the programmed Preamble, Postamble, Scanned Data Length, Prefix/Suffix Symbol ID OR AIM ID if you had defined as part of the length. If you enable the Suffix Symbol ID of symbology, you would add one character to the previous example’s length.

You would set up the Batch Reading rule with the following command line:

[PROGRAM] [Batch Reading] [0301001041FF070009FF09000943FF] [FIN] [END]

Page 70

FuzzyScan

Programming Manual

Configure Your FuzzyScan

The breakdown of the command line is shown below:

The number of elements in the overall rule

Code identifier of Code 128

0010

Code length that must match for Code 128 A-CODE128 sample length (9) plus Suffix Symbol ID (1) = 10

Start character match for Code 128, 41h = “A”

End of first code

Code identifier of Code 39

0009

Code length that must match for Code 39 B-CODE39 sample length (8) plus Suffix Symbol ID (1) = 9

Universal matched character, indicating all character Also indicate end of second code

Code identifier of Code 93

0009

Code length that must match for Code 93 C-CODE93 sample length (8) plus Suffix Symbol ID (1) = 9

Start character match for Code 93, 43h = “C”

End of third code

Note: If the [Character match(es)] is set to “FF”, the following “FF” which indicated the end of the code was not need to set.

- Structure of Data String

STX

(RS232/USB COM

interface)

Preamble

Scanned Data

Length

Prefix Symbol ID

Prefix AIM Symbol ID

Scanned Data modified

by DataWizard

Suffix Symbol ID

Suffix AIM Symbol ID

Postamble

ETX

(RS232/USB COM

interface)

1 character

1-15 characters

2-4 digits

1 or 3 characters

Variable length

1 or 3 characters

1-15 characters

1 character

Page 71

FuzzyScan

Programming Manual

Configure Your FuzzyScan

PROGRAM

Operation Control

(All Series)

 Buzzer, Indicator & Vibrator Control 

F_DEFAULT

Family Code Selection

P.C

Parameter Selection

Option Code

Buzzer Tone Adjust

SS SS SS SS SS SS SS

Buzzer tone – mute Buzzer tone – low (Frequency 1.20 kHz) Buzzer tone – medium (Frequency 2.70 kHz)



Buzzer tone – high (Frequency 2.81 kHz) Buzzer tone - extremely high (Frequency 2.93 kHz) Power-on beep  No power-on beep

0 1 2 3 4 5 6

Power On Indicator

SS SS SS

Disable (LED off) LED steady on



LED flash

F560 series scanner doesn’t support this function.

0 1 2

Good Read Indicator

SS SS

Disable Enable 

0 1

Vibrator Control

SS SS

Disable Enable  Optional function is only available for vibrator model.

0 1



Buzzer Tone Adjust: Available firmware: A680 / A780 1.00.01 and above

A770 rev.1.00.26, rev. 2.00.10 and above A670 rev 1.00.07 and above F680 / L680 rev.2.01.12 and above F780 / L780 rev.2.01.12 and above F560 rev. 2.01.14 and above

Page 72

FuzzyScan

Programming Manual

Configure Your FuzzyScan

PROGRAM

Operation Control

(A Series)

 Buzzer Volume 

F_DEFAULT

Family Code Selection

P.C

Parameter Selection

Option Code

Buzzer Volume

SS SS SS

Low Medium High 

0 1 2



Buzzer Volume: Available firmware: A680 / A780 1.00.01 and above

A770 rev. 1.00.21, rev. 2.00.04 and above A670 rev 1.00.03 and above

Page 73

FuzzyScan

Programming Manual

Configure Your FuzzyScan

PROGRAM

Operation Control

(All Series)

 Redundancy & 1D Code Inverse Reading 

F_DEFAULT

Family Code Selection

P.C

Parameter Selection

Option Code

Redundancy

SS SS SS SS SS SS

None Level 1  Level 2 Level 3 Level 4 Level 5

To prevent potential miss reading.

0 1 2 3 4 5

1D Barcode Inverse Reading

SS SS

Disable  Enable

0 1



The Redundancy is the number of times the same bar code label has to be decoded before it is transmitted.

Page 74

FuzzyScan

Programming Manual

Configure Your FuzzyScan

PROGRAM

Operation Control

(All Series)

 Reread Delay & Good Read Delay Control 

F_DEFAULT

Family Code Selection

P.C

Parameter Selection

Option Code

Reread Delay

(Double Scan Verification)

SS SS SS SS SS SS

Disable Immediate time out  Short time out Medium time out Long time out Force verification

0 1 2 3 4 5

Good Read Delay

SS SS SS SS SS SS SS

None  200 msec. 500 msec. 1 sec.

1.5 sec. 2 sec. 3 sec.

0 1 2 3 4 5 6



The Reread Delay (Double Scan Verification) is designed to inhibit FuzzyScan from reading the same bar code label twice in pre-defined short duration. Force Verification

will not allow reading of the same bar code twice.



This Good Read Delay is the minimum amount of time before the imager can read another bar code.

Page 75

FuzzyScan

Programming Manual

Configure Your FuzzyScan

PROGRAM

Operation Control

(All Series)

 Light Source On Time, Hands Free Time-out 

F_DEFAULT

Family Code Selection

P.C

Parameter Selection

Option Code

Light Source On Time

SS SS SS SS

Short  Medium Long Extremely long

0 1 2 3

Hands Free Time-out

SS SS SS SS SS

Short  Medium Long Extremely long Disable

0 1 2 3 4

Good Read Duration

SS SS SS SS SS

Short Medium



Long Extremely long Extremely short

0 1 2 3 4

Time Delay to Low Power Mode

SS SS SS SS SS SS

1 sec 3 secs 5 secs 7 secs 9 secs Immediate 

0 1 2 3 4 5



The Light Source On Time is a pre-defined light source time out counter for Alternative Mode, Presentation Mode and Level Mode. The scanner keeps the light source on till the pre-defined light source on time is up. You can adjust this parameter to meet your own application requirement.



The Presentation Mode, Force Mode and Flash Mode are referred to as “hands free” mode. The hands free mode will be automatically changed to manual trigger mode when you press the trigger. You can remain the scanner in manual trigger mode by setting the Hands Free Time-Out. Once the time-out duration is up (if there’s no any trigger operation), the imager will revert to the original hands free mode.



The Time Delay to Low Power Mode sets the time for scanner to enter low power mode after any scanning activity. This setting is only available for the scanner is in low power mode.

Page 76

FuzzyScan

Programming Manual

Configure Your FuzzyScan

PROGRAM

Operation Control

(All Series)

 Presentation Auto-Sense & Sensitivity 

F_DEFAULT

Family Code Selection

P.C

Parameter Selection

Option Code

Presentation Auto-sense

SS SS

Disable Enable  0 1

Presentation Sensitivity

SS SS SS SS SS SS SS

Level 1 Level 2 Level 3 Level 4 Level 5



Level 6 Level 7

0 1 2 3 4 5 6



When enabling the Presentation Auto-sense, the scanner can be switched from hand-held and hand-free scanning automatically when working with the SmartStand.



The presentation sensitivity is used to configure the sensitivity level when the scanner is set as presentation mode. The higher lever means higher sensitivity for detecting

the barcode.

Page 77

FuzzyScan

Programming Manual

Configure Your FuzzyScan

PROGRAM

Condensed DataWizard

 Preamble, Postamble, Data Length & Symbol ID Trans. 

F_DEFAULT

Family Code Selection

P.C

Parameter Selection

Option Code

Preamble

None



1-15 characters

Maximum 15-character input; scan “FIN” to terminate this selection.

FIN

[00-7F], [FIN]

Postamble

None



1-15 characters

Maximum 15-character input; scan “FIN” to terminate this selection.

FIN

[00-7F], [FIN]

Data Length Transmission

SS SS

Disable



Enable 2~4 digits data length transmission

0 1

Symbology ID Transmission

SS SS SS SS SS SS SS

Disable symbology ID transmission



Enable prefix symbology ID transmission Enable suffix symbology ID transmission Enable both prefix and suffix symbology ID transmission Enable prefix AIM symbology ID transmission Enable suffix AIM symbology ID transmission Enable both prefix and suffix AIM symbology ID transmission

0 1 2 3 4 5 6



DataWizard is the most powerful, Artificial-Intelligence based data editing expert system provided specially for the FuzzyScan family bar code readers. Through DataWizard, you can process the scanned data prior the transmissions in many ways as: Insert, Delete, Match, Verify, Replace, Reorganize, and Repeat Transmission. It will help you to arrange the transmission of scanned data to any specific format without software modification.



Due to the resources used by this system, Full-feature DataWizard is only supported by PowerTool. Through the PowerTool, all settings and configurations can be done on-screen on Windows 2000 / XP / 7



A Condensed Version DataWizard is provided by each FuzzyScan series. Through this menu, the condensed DataWizard can be utilized via bar code menu readings with ease.



Please note that all “Character” input should be referred to the ASCII/HEX Table listed in Appendix to find matched HEX value.



If you have any problem to use DataWizard, please refer to following pages for details and consult your local FuzzyScan vendor or our web site for any assistance.

Page 78

FuzzyScan

Programming Manual

Configure Your FuzzyScan

PROGRAM

Condensed DataWizard

 Data Formatter Setting 

F_DEFAULT

Family Code Selection

P.C

Parameter Selection

Option Code

2nd Option Code

Formatter Control

MS MS

Disable



Select one bar code symbology Select all bar code symbologies

FIN

(2 digits)

automatic termination automatic termination

1st Insertion

Disable



Enable

2-digits identified position; max. 3 insertion characters

FIN

(2 digits)

position

[1-3 characters], [FIN]

2nd Insertion

Disable



Enable

2-digits identified position; max. 3 insertion characters

FIN

(2 digits)

position

[1-3 characters], [FIN]

3rd Insertion

Disable



Enable

2-digits identified position; max. 3 insertion characters

FIN

(2 digits)

position

[1-3 characters], [FIN]

4th Insertion

Disable



Enable

2-digits identified position; max. 3 insertion characters

FIN

(2 digits)

position

[1-3 characters], [FIN]



The Data Formatter is used to edit the scanned raw data prior to transmitting the data to the host computers or terminals. It allows you to select desired bar code symbologies for formatter control, and provides Multiple Position Insertion and Multiple Character Insertion (max three characters) in the identified position.



While the Data Formatter is enabled, it arranges only scanned data without Preamble, Postamble, STX, ETX, Data Length, Prefix/Suffix Symbology ID or Record Suffix. All of the above programmable parameters perform the same function depending on your setting.



Regarding the “Bar Code Selection” and “Position Calculation” of data formatter, please refer to page 75 for details.



Please note that all “Character” input should be referred to the ASCII/HEX Table listed in Appendix to find matched HEX value.

Page 79

FuzzyScan

Programming Manual

Configure Your FuzzyScan

PROGRAM

Condensed DataWizard

 Data Verifier Setting 

F_DEFAULT

Family Code Selection

P.C

Parameter Selection

Option Code

2nd Option Code

Verifier Control

MS MS

Disable



Select one bar code symbology Select all bar code symbologies

FIN

(2 digits)

automatic termination automatic termination

Identified Data Length

Disable



Enable

Determine the identified data length for verification.

FIN

(2 digits)

1st Identified Character

Disable



Enable

2-digits checking position; 1 identified character

FIN

(2 digits)

position

[00-7F]

2nd Identified Character

Disable



Enable

2-digits checking position; 1 identified character

FIN

(2 digits)

position

[00-7F]

3rd Identified Character

Disable



Enable

2-digits checking position; 1 identified character

FIN

(2 digits)

position

[00-7F]



The Data Verifier is used to provide advanced verification for error-free scanning and to work as an Embedded Data Transmitting Filter.



All data must conform to the Identified Bar Code Symbologies, Identified Data Length, and one to three Identified Characters in the checking position. Otherwise, the FuzzyScan will not transmit the data to the host computers or terminals, but will instead issue 3 long beeps for verification error and skip the scanned data.



The Data Verifier checks only scanned data without Preamble, Postamble, STX, ETX, Data Length, Prefix/Suffix Symbology ID or Record Suffix.



Regarding the “Bar Code Selection” and “Position Calculation” of Data Verifier, please refer to page 75 for details.



Please note that all “Character” input should be referred to the ASCII/HEX Table listed in Appendix to find matched HEX value.

Page 80

FuzzyScan

Programming Manual

Configure Your FuzzyScan

PROGRAM

Condensed DataWizard

 Data Replacer Setting 

F_DEFAULT

Family Code Selection

P.C

Parameter Selection

Option Code

2nd Option Code

Replacer Control

MS MS

Disable



Select one bar code symbology Select all bar code symbologies

FIN

(2 digits)

automatic termination automatic termination

1st Replacement

Disable



Enable

2-digits identified position; 1 replacement character

FIN

(2 digits)

position

[00-7F]

2nd Replacement

Disable



Enable

2-digits identified position; 1 replacement character

FIN

(2 digits)

position

[00-7F]

3rd Replacement

Disable



Enable

2-digits identified position; 1 replacement character

FIN

(2 digits)

position

[00-7F]



The Data Replacer is used to edit the scanned raw data prior to transmitting the data to the host computers or terminals. It allows you to select desired bar code symbologies for replacer control, and provides Multiple Position Replacement in the identified position.



All data must conform to the Identified Bar Code Symbologies, and one to three Identified Characters in the identified position. While the Data Replacer is enabled, it arranges only scanned data without Preamble, Postamble, STX, ETX, Data Length, Prefix/Suffix Symbology ID or Record Suffix.



Regarding the “Bar Code Selection” and “Position Calculation” of Data Replacer, please refer to page 75 for details.



Please note that all “Character” input should be referred to the ASCII/HEX Table listed in Appendix to find matched HEX value.

Page 81

FuzzyScan

Programming Manual

Configure Your FuzzyScan

PROGRAM

Condensed DataWizard

 Data Organizer Setting 

F_DEFAULT

Family Code Selection

P.C

Parameter Selection

Option Code

2nd Option Code

Organizer Control

MS MS

Disable



Select one bar code symbology Select all bar code symbologies

FIN

(2 digits)

Automatic termination Automatic termination

1st Organization

Disable



Enable

2-digits identified position; Forward/backward data transmission setting

FIN

(2 digits)

position direction

0 (Forward)



1 (Backward)

2nd Organization

Disable



Enable 2-digits identified position; Forward/backward data transmission setting

FIN

(2 digits)

position direction

0 (Forward)



1 (Backward)

Include/Exclude Control

Transmitted data excluded the data of identified position



Transmitted data included the data of identified position

0 1



The Data Organizer is used to edit the scanned raw data prior to transmitting the data to the host computers or terminals. It allows you to select desired bar code symbologies for organizer control, and provides maximum two identified positions to send the data forward or backward. It also allows you to control the transmitted data including or excluding the data of identification position. Please refer to the application example listed in page 75 for details.



While the Data Organizer is enabled, it arranges only scanned data without Preamble, Postamble, STX, ETX, Data Length, Prefix/Suffix Symbology ID or Record Suffix.



Regarding the “Bar Code Selection” and “Position Calculation” of Data Organizer, please refer to page 75 for details.



Please note that all “Character” input should be referred to the ASCII/HEX Table.

Page 82

FuzzyScan

Programming Manual

Configure Your FuzzyScan

Select a Bar Code Symbology

You can select one or all types of bar code symbologies to use Condensed DataWizard for advanced transmission

arrangement. If you scan “00” to select all types, the

FuzzyScan will arrange all incoming data to meet your pre-defined format. If you want to select only one type bar code, please select one of the option code listed below.

1D Bar Code Symbology

Code 128

Matrix 2 of 5

GS1-128

Interleaved 2 of 5

UPC-A

China Postal Code

UPC-A with 2 supplement

German Postal Code

UPC-A with 5 supplement

Standard/Industrial 2 of 5

UPC-E

Code 93

UPC-E with 2 supplement

Code 11

UPC-E with 5 supplement

MSI/Plessey

EAN-13

UK/Plessey

EAN-13 with 2 supplement

Telepen

EAN-13 with 5 supplement

GS1 DataBar

EAN-8

GS1 DataBar Limited

EAN-8 with 2 supplement

GS1 DataBar Expanded

EAN-8 with 5 supplement

Composite Codes

Codabar/NW-7

IATA

Code 39

Coupon Code

Code 32

PDF417

Trioptic Code 39

Micro PDF417

Codablock F

Code 16K

Code 49

2D Bar Code Symbology

QR Code

MaxiCode

MicroQR Code

Aztec Code

DataMatrix

Chinese Sensible Code

GS1 DataMatrix

Postal Code

Korea Post Code

Japanese Post

Australian Post

KIX Post

British Post

Planet Code

Intelligent Mail barcode

Postnet

Position Calculation

[Data Formatter]

If there is a 5-character input data string, refer to the following to calculate the actual position for insertion:

X X X X X

00 01 02 03 04 05

[Data Verifier, Data Replacer, Data Organizer]

If there is a 11-character data string, please refer to the following to calculate the actual position for identification.

X X X X X X X X X X X

Page 83

FuzzyScan

Programming Manual

Configure Your FuzzyScan

Application Example

If your bar code label is a 16-digit Interleaved 2 of 5 which includes the information of 6-digit date code, 6-digit serial number and 4-digit unit price, you want the FuzzyScan do the following for you without software modification:

 Apply only Interleaved 2 of 5 to the condensed

DataWizard.

 Check bar code is actually with 16-digit length.  Allow bar code output whose date code is leading with “9”.  Three outputs with “TAB” suffix.  The date code output should skip “9” and replaced it by

“A”.

 The serial number output should be led with “SN”.  The unit price output should be skipped the first 2 digits.  Test Bar Code : 9 8 1 0 2 5 1 2 3 4 5 6 9 8 7 6

 Actual Output : A81025[TAB]SN123456[TAB]76[TAB]

Programming Procedure

[Data Verifier]

 Scan “Program” to enter the programming mode.  Scan “Verifier Control” and set bar code symbology to

“48” (Interleaved 2 of 5).

 Scan “Identified Data Length” and set the length to

“16”.

 Scan “1st Identified Character” and set the identified

position to “00”, then set the identified character to “39”

(Hex Code of 9).

[Data Formatter]

 Scan “Formatter Control” and set bar code symbology

to “48”.

 Scan 1st Insertion” and set the identified position to

“06”, then inserted characters to “09” (Hex Code of TAB), “53” (Hex Code of S), “4E” (Hex Code of N).

 Scan “2nd Insertion” and set the identified position to

“12”, then inserted character to “09”. In the final, you must scan “FIN” (Finish) code to terminate this

selection.

 Scan “3rd Insertion” and set the identified position to

“16”, then inserted character to “09”. In the final, you must scan “FIN” (Finish) code to terminate this

selection.

Page 84

FuzzyScan

Programming Manual

Configure Your FuzzyScan

[Data Replacer]

 Scan “Replacer Control” and set bar code symbology to

“48”.

 Scan “1st Replacement” and set the identified position to

“00”, then replaced character to “41” (Hex Code of A).

[Data Organizer]

 Scan “Organizer Control” and set bar code symbology to

“48”.

 Scan “1st Organization” and set the identified position to

“16”, then set the data transmission to “0” (forward).

 Scan “2nd Organization” and set the identified position to

“17”, then set the data transmission to “1” (backward).

 Scan “END” (Exit) to terminate the programming.

[Important Notice]

Please note that Condensed DataWizard will follow the preset working flow as below:

Verifier  Formatter  Replacer  Organizer

So when you set the identified position in Data Organizer, you must consider the inserted data which you already set via Data Formatter.

Page 85

FuzzyScan

Programming Manual

Appendix

Symbology ID Table

Each AIM Code Identifier contains the three-character string ]cm where: ] = Flag Character; c = Code Character; m = Modifier Character

1D Symbology ID Table

Code Family

Primary Format

Cino ID

AIM ID

Code Family

Primary Format

Cino ID

AIM ID

Hex

Value

Char.

Code

Char.

Modified

Char.

Hex

Value

Char.

Code

Char.

Modified

Char.

UPC

UPC-A

E 0 EAN/JAN

EAN/JAN-8

UPC-A with 2 supple.

32 1 EAN/JAN-8 with 2 supple.

35 1 UPC-A with 5 supple.

42 2 EAN/JAN-8 with 5 supple.

UPC-E

3 E 0

EAN/JAN-13

UPC-E with 2 supple.

33 1 EAN/JAN-13 with 2 supple.

UPC-E with 5 supple.

43 2 EAN/JAN-13 with 5 supple.

Example: A UPC-A bar code 012345678950 with 2 supplement 12 is transmitted as ]E0012345678950]E112

Example: A EAN/JAN-8 bar code 49123562 with 5 supplement 12345 is transmitted as ]E449123562]E212345

Code 128

B C m

Code 93

09 H G m GS1-128

31 C 1

Code 11

10 P H

Codabar

Codabar/NW-7

06 D F m MSI/Plessey

MSI/Plessey

11 R M

Code 25

Standard/Industrial 2 of 5

08 I S 0 UK/Plessey

UK/Plessey

12 S P

Matrix 2 of 5

38 K X 0 Telepen

Telepen

13 T B

Interleaved 2 of 5

48 J I m GS1 DataBar

GS1 Databar

X e m

GS1 DataBar Limited

GS1 DataBar Expanded

China Postal Code

58 L X

Composite

Composite Code

Code 39

07 G A m German Postal Code

68 M I m Code 39 Trioptic

47 W X

IATA

15 O R m Code 32

37 G A

UCC Coupon

UCC Coupon Code

PDF417

V L m

Micro PDF417

Example : A UPC-A 512345678900 + GS1-128 81010123451297 bar code is transmitted as]E0512345678900]C181010123451297

Example: A EAN-13 9923456789019 + GS1-128 81010123451297 bar code is transmitted as ]E09923456789019]C181010123451297

Codablock

Codablock F

18 Y O

Korea Post

Korea Post Code

21 a X

Remark: Above examples are given for the transmission of AIM ID.

Page 86

FuzzyScan

Programming Manual

Appendix

2D Symbology ID Table

Code Family

Primary Format

Cino ID

AIM ID

Code Family

Primary Format

Cino ID

AIM ID

Hex

Value

Char.

Code

Char.

Modified

Char.

Hex

Value

Char.

Code

Char.

Modified

Char.

QR Code

A0 b Q

British Post

h X 0

Micro QR Code

Intelligent Mail barcode

B3 j 0

Data Matrix

c d m

Japanese Post

B4 k 0

GS1 Data Matrix

MaxiCode

A2 d U m KIX Post

KIX Post

B5 l 0

Aztec Code

A3 e z m Planet Code

Planet Code

B6 m 0

Chinese Sensible

f X 0

Postnet

B8 o 0

Australian Post

B0 g 0

Page 87

FuzzyScan

Programming Manual

Appendix

Keyboard Function Code Table

No.

ANSI

ASCII

Key Function

Ctrl Output

No.

ANSI

ASCII

Key Function

Ctrl Output

NUL

00H

RESERVED

Ctrl + @

DLE

10H

Ctrl + P

SOH

01H

CTRL (Left)

Ctrl + A

DC1

11H

Ctrl + Q

STX

02H

ALT (Left)

Ctrl + B

DC2

12H

Ctrl + R

ETX

03H

SHIFT

Ctrl + C

DC3

13H

F10

Ctrl + S

EOT

04H

CAPS LOCK

Ctrl + D

DC4

14H

F11

Ctrl + T

ENQ

05H

NUM LOCK

Ctrl + E

NAK

15H

F12

Ctrl + U

ACK

06H

ESC

Ctrl + F

SYN

16H

INS (Insert) (Edit)

Ctrl + V

BEL

07H

Ctrl + G

ETB

17H

DEL (Delete) (Edit)

Ctrl + W

08H

BACK SPACE

Ctrl + H

CAN

18H

HOME (Edit)

Ctrl + X

09H

TAB

Ctrl + I

19H

END (Edit)

Ctrl + Y

0AH

Ctrl + J

SUB

1AH

PAGE UP (Edit)

Ctrl + Z

0BH

Ctrl + K

ESC

1BH

PAGE DOWN (Edit)

Ctrl + [

0CH

Ctrl + L

1CH

UP (Edit)

Ctrl + \

0DH

ENTER (CR)

Ctrl + M

1DH

DOWN (Edit)

Ctrl + ]

0EH

Ctrl + N

1EH

LEFT (Edit)

Ctrl + 6

0FH

Ctrl + O

1FH

RIGHT (Edit)

*see note

To emulate the keyboard function key input for user definable parameters, user must configure actual content using the Reserved ASCII 00 – 31 characters, and also Enable the “Function Key Emulation”. Otherwise, the Ctrl output will be done by the scanner. Please refer to the above Keyboard Function Code Table which is for IBM PC/XT/AT, PS/2, PS/VP, COMPAQ PC, HP Vectra PC, Notebook PC, APPLE and PowerMac, and WYSE PC Enhanced or fully compatible machines.

The last character in the Ctrl Output column is varied for different countries.

Country (refer to Keyboard Layout) & Character

United State

Switzerland

France

Belgium

UK - Germany

Sweden

Denmark

Norway

Spain

Italy -

Page 88

FuzzyScan

Programming Manual

Appendix

ASCII Input Shortcut

To configure the user definable parameters of FuzzyScan via programming menu, FuzzyScan will ask you to scan your desired ASCII value in HEX form. You have to refer to the

“HEX/ASCII Table” for details.

Example:

If you want the scanned data output leading with a Dollar

Sign, you have to set the “Preamble” to “$”. The configuration

procedure is listed below for reference.  Scan the system command – PROGRAM listed on page

3-24 to enter programming mode.

 Scan family code – PREAMBLE to select this family.  Refer to the Hex/ASCII Table, you will find the HEX value

of “$” is 24.

 Scan the option code – 2 listed on the fold out back cover.  Scan the option code – 4 listed on the fold out back cover.  Scan the system command – FIN (Finish) to terminate

Preamble setting.

 Scan the system command – End to exit the programming

mode for normal operation.

HEX/ASCII Reference Table

0 1 2 3 4 5 6

NUL

DLE

SPACE 0 @ P `

p 1 SOH

DC1 ! 1 A Q a q 2 STX

DC2 " 2 B R b r 3 ETX

DC3 # 3 C S c s

EOT

DC4 $ 4 D T d t

ENQ

NAK % 5 E U e u 6 ACK

SYN & 6 F V f v 7 BEL

ETB ' 7 G W g w 8 BS

CAN ( 8 H X h x 9 HT

EM ) 9 I Y i y A LF

SUB * : J Z j z B VT

ESC + ; K [ k { C FF

FS , < L \ l | D CR

GS - = M ] m } E SO

RS . > N ^ n ~ F SI

US / ? O _ o DEL

Example : ASCII “A”  HEX “41”; ASCII “a”  “61”

: High Byte of HEX Value : Low Byte of HEX Value

Page 89

FuzzyScan

Programming Manual

Appendix

Host Interface Quick Set

RS232 Serial

PS/2 (DOS/V) KBW Standard Mode

USB HID Standard Mode

Keyboard Replacement

PS/2 (DOS/V) KBW Turbo Mode

USB HID Turbo Mode

USB HID Legacy Mode

USB Com Port Emulation

Page 90

FuzzyScan

Programming Manual

Appendix

Operation Mode Quick Set (F & L Series)

Low Power (Low power trigger)

Force (Continued power on)

Alternative (Periodic power off)

Trigger (External triggering)

Toggle (Repeat reading)

Flash (Pulse driven reading)

Presentation (Auto sensing)

Diagnostic (Test reading)

Level (Auto power off)

Page 91

FuzzyScan

Programming Manual

Appendix

Operation Mode Quick Set (A Series)

Low Power (Low power trigger)

Force (Continued power on)

Alternative (Periodic power off)

Trigger (External triggering)

Toggle (Repeat reading)

Level (Auto power off)

Presentation (Auto sensing)

Diagnostic (Test reading)

Multiple Read

Page 92

FuzzyScan

Programming Manual

Appendix

Option Codes

0 A

1 B

2 C

3 D

4 E

FIN (Finish)

Abort

END (Exit)

Page 93

FuzzyScan

Programming Manual

Appendix

System Commands

PROGRAM

(Enter Programming Mode)

System Information List

(SYSLIST)

Save User Default

FIN (Finish)

PowerTool Host Link

User Default

END

(Exit Programming Mode)

Factory Default

Master Default



Factory Default: After scanning” Factory Default” command, all parameters will be returned to factory default value.



Master Default: After scanning “Master Default” command, the scanner will remain the pre-set parameters of Host Interface Selection, Keyboard Interface Control (except Record Suffix; Preamble; Postamble), Serial Interface Control (except Record Suffix; Preamble; Postamble), and Wand/Laser Emulation Control, the rest of parameters will be returned to default value.



User Default: After scanning” Save User Default” command, all current parameters will be stored to the flash memory. Once you change the parameter and would like to return to previous setting, please scan “User Default”.

Page 94

FuzzyScan

Programming Manual

Appendix

Cino L780, F680, L680, F790, F780 Programming Manual

Specifications and Main Features

Frequently Asked Questions

User Manual