User’s Manual
English
3.5 inch Retina LCD
3G
(HDMI/HD-SDI input / HD-SDI ouptout)
Various Advantage LCD Loupe
Multi vendor Battery support
Waveform / Vectorscope / Peaking / Saturation
Pixel to Pixel / Clip Guide / Crop Guide / Overscan
Underscan / Anamorphic / Monochrome and etc.
ELECTRONIC VIEW FINDER
Cineroid EVF4RVW
Thank you for purchasing the Cineroid EVF.
The Cineroid EVF (hereafter referred to as “EVF") is a view nder that can be mounted on any
video camera with a HDMI output signal. Please thoroughly read the user manual for best
operation and understanding of all of the functions of the EVF.
Test Before Operating
It is recommended to test the EVF before operating. Check if the EVF can be turned on once
powered, and check if the information/menu is being properly displayed on the LCD.
Copyrights and Prohibitions
The use of images of people, property, and places can without permission can be prohibited by
law. Please refer to your region’s laws regarding copyrights.
02 03
○
Canon and EOS are registered trademarks of Canon.
○
Nikon is a registered trademark of Nikon.
○
Sony is a registered trademark of Sony.
○
Panasonic is a registered trademark of Panasonic.
1. Do not face the eyecup directly into the sun as it may damage the LCD.
2. The shadow disk is installed on EVF at factory. This shadow disk can be removed by disassembling
eyecup from loupe.
Safety Precautions
21
English
ELECTRONIC VIEW FINDER
Cineroid EVF4RVW
Safety Precautions
◎
Do not use any batteries, power cord, or accessories that are not specied in this
document.
◎
When using a power cord, be sure to plug it in completely. Do not handle power plugs
when your hands are wet. When unplugging the power cord, grasp the plug body
or adapter instead of the cord.
◎
Power cords that are scratched, heavily bent or twisted can potentially be hazardous and
a source of electric shock and/or re.
◎
Do not insert foreign objects into the product’s electric or cable components.
◎
Do not place the power cord near sources of heat as this may melt or cause damage to
the cord potentially causing re or electric shock.
◎
Do not disassemble or modify the product. This may damage the product and cause
danger due to a malfunction.
◎
Please keep the product out of reach of young children. Injuries may occur due to damage
to the product.
◎
When using the product in an airplane or hospital setting, it is recommended to acquire
authorization rst as signals or electro-magnetic waves from the product may cause other
equipment to malfunction.
◎
Do not store the product in a dusty or humid environment as damage may occur.
◎
When the product is mounted on a camera, do not lift or move the camera by grabbing
the product. This may cause damage to the product or the camera mount.
◎
Do not clean the product with paint thinner, benzene, or other volatile solvents. This may
cause damage to the product and become a re hazard.
◎
This product is not waterproof. If the product is dropped in water, contact the service
center immediately.
Please observe the following safety precautions as they are meant for the safe and
proper use of the product to reduce the risk of accidents. Upon reading the user
manual, keep it in a safe and available place.
ELECTRONIC VIEW FINDER
Cineroid EVF4RVW
04 05
Table of Contents
Safety Precautions
Table of Contents
Components
Parts
Before Using the EVF
Openable Optical Loupe
Hood for Loupe
Separate of Loupe
Adjusting the Diopter / Connecting Extention Tube
Installing the Battery
Connecting External Power
Connecting input / output
Power On/O
Basic Features
Operating the Menu
Adjusting Color
Adjusting the Screen
Volume Control
03
04
06
07
08
08
09
09
10
10
11
11
12
13
13
13
English
ELECTRONIC VIEW FINDER
Cineroid EVF4RVW
Shooting Features
Peaking
Pixel to Pixel
Clip guide
Waveform / Vectorscope
False color 1
False color 2
Monochrome
Look up table
Freeze
Over Scaling
Underscan
Crop Guide
Anamorphic
Center Marker
Time Code
Screen Flip
Setting User Controls
Custom Button Functions
Firmware Upgrade
Custom Display Settings
Parameter Save And Restore
Factory Reset
Product Specications
Optional Products
14
15
15
16
17
17
20
20
21
25
18
21
23
23
25
19
19
24
24
18
22
22
24
ELECTRONIC VIEW FINDER
Cineroid EVF4RVW
Components
Please ensure all parts are present after opening the box.
06 07
e
A. LCD VF + Optiacl Loupe
D. Canon LP-E6
Battery holder
C. Battery holder mount
B. D-tap to mini XLR cabl
E. Cannon BP911
Series Battery holder
F. Sony NPF
Battery holder
G. Mini Ball Head
H. Extension tube I. User's Manual J. Carrying Bag
English
ELECTRONIC VIEW FINDER
Cineroid EVF4RVW
Parts
Diopter Adjuster
Wheel Controller
Hood Latch
Lens
Soft Eyecup
Loupe Latch
Menu Buttons
HDMI input
External power
Power Switch
Mono Speaker
Loupe Flip-up Latch
USB port
Multi Vendor
Battery support
HDMI output
HD-SDI output
ELECTRONIC VIEW FINDER
Cineroid EVF4RVW
08 09
Before Using the EVF
Openable Optical Loupe
Hood for Loupe
The optical loupe attached to the EVF body can be
ipped open 180 degrees.
The opened Optical Loupe
You can use the LCD hood in the open state by
using seperated part from the optical loupe which
was attached to the cineroid EVF4RVW.
English
ELECTRONIC VIEW FINDER
Cineroid EVF4RVW
Before Using the EVF
Separate of Loupe
Please
operate both side of latchs on the optical
loupe and remove the optical loupe. The optical
loupe attached to the EVF body can be detached
completely.
When viewing through the optical loupe, the
user can adjust the diopter accordingly. Rotate
the dial in either direction until the image
becomes clear. and Extention tube is used to
extend loupe length for old eye.
Adjusting the Diopter / Connecting Extension tube
Extension tube
1 Touch Removealbe
Loading...