Cineroid
User Manual
E l e c t r o n i c V i e w F i n d e r
Cineroid
Model : EVF 4L
EVF 4B
English Korean
EVF4
SECULINE Co., Ltd
02 03
Thank you for purchasing the Cineroid EVF.
The Cineroid EVF (hereafter referred to as“EVF”) is a view finder that can be mounted
on any video camera with a HDMI output signal. Please thoroughly read the user
manual for best operation and understanding of all of the functions of the EVF.
Test Before Operating
It is recommended to test the EVF before operating. Check if the EVF can be turned on
once powered, and check if the information/menu is being properly displayed on the
LCD.
Copyrights and Prohibitions
The use of images of people, property, and places can without permission can be
prohibited by law. Please refer to your region’s laws regarding copyrights.
○ Canon and EOS are registered trademarks of Canon.
○ Nikon is a registered trademark of Nikon.
○ Sony is a registered trademark of Sony.
SECULINE Co., Ltd
EVF4
English
Safety Precautions
◎ Do not use any batteries, power cord, or accessories that are not specified in this
document.
◎ When using a power cord, be sure to plug it in completely. Do not handle power plugs
when your hands are wet. When unplugging the power cord, grasp the plug body
or adapter instead of the cord.
◎ Power cords that are scratched, heavily bent or twisted can potentially be hazardous and
a source of electric shock and/or fire.
◎ Do not insert foreign objects into the product’s electric or cable components.
◎ Do not place the power cord near sources of heat as this may melt or cause damage to
the cord potentially causing fire or electric shock.
◎ Do not disassemble or modify the product. This may damage the product and cause
danger due to a malfunction.
◎ Please keep the product out of reach of young children. Injuries may occur due to damage
to the product.
◎ When using the product in an airplane or hospital setting, it is recommended to acquire
authorization first as signals or electro-magnetic waves from the product may cause other
equipment to malfunction.
◎ Do not store the product in a dusty or humid environment as damage may occur.
◎ When the product is mounted on a camera, do not lift or move the camera by grabbing
the product. This may cause damage to the product or the camera mount.
◎ Do not clean the product with paint thinner, benzene, or other volatile solvents. This may
cause damage to the product and become a fire hazard.
◎ This product is not waterproof. If the product is dropped in water, contact the service
center immediately.
Please observe the following safety precautions as they are meant for the
safe and proper use of the product to reduce the risk of accidents. Upon
reading the user manual, keep it in a safe and available place.
Do not face the eyecup directly into the sun as it may damage the LCD.
!
WARNING
EVF4
SECULINE Co., Ltd
04 05
Table of Contents
Safety Precautions
Table of Contents
Configuration
Parts
Before Using the EVF
Detachable Optical Viewfinder
Installing the Battery
Connecting External Power
Powering On/Off
Adjusting the Diopter
Connecting a HDMI Cable
Connecting a Composite Cable
Connection a Monitor
Basic Features
Operating the Menu
Input Selection
Adjusting Color
Adjusting the Screen
Adjusting the Volume
03
04
06
07
08
08
09
09
10
10
11
11
12
13
13
14
14
SECULINE Co., Ltd
EVF4
English
Shooting Features
Peaking
Saturation (Exposure)
Underscan
Pixel to Pixel
Monochrome B/W
4:3 Guide bar
Screen Flip
Setting User Controls
Custom Button Functions
Custom Display Setting
OSD Color Setting
Factory reset
Product Specifications
Optional Products
15
16
16
17
17
18
19
20
20
21
18
20
22
EVF4
SECULINE Co., Ltd
06 07
Components
Please ensure all parts are present after opening the box.
B. Battery Cover
C. Battery
D. Battery Charger
F. Mini Shoe Mount Adapter
G. User Manual
H. Cineroid EVF Carrying Case
E. Mini HDMI Cable
A. LCD VF + Optical Loupe
SECULINE Co., Ltd
EVF4
English
Parts
HDMI In
HDMI Out
(EVF4L only)
Power Switch
1/4”Screw Mount
Battery Cover
Diopter Adjuster
Menu Button
3.2 inch LCD screen
Analog A/V input
Eye Cup
3.5φHeadphone Jack
Feature Buttons
External Speaker
EVF4
SECULINE Co., Ltd
08 09
Before Using the EVF
Detachable Optical Loupe
1. The optical loupe attached to the EVF body can be flipped open 180 degrees or
detached completely.
2. To open the optical loupe, firmly grasp the loupe and flip upwards. When it is fully open,
the loupe will stay fixed on top of the body.
3. To completely detach the loupe from the body, simply slide the small latch to the left and lift
up the loupe. To replace the loupe, slide the small latch to the left and place the loupe
back into place.
Installing the Battery
1. The Cineroid EVF can be used with small, medium or large sized batteries. The battery
cover can only be used with the small sized batteries.
2. Remove the battery cover.
3. Push the battery in towards the direction of the arrow making sure the battery is properly
aligned in place.
4. The battery or the connectors may be damaged if not aligned properly.
5. The Canon LP-E6 battery can only be used in conjunction with the proper adapter.
2
3
3
2
180
SECULINE Co., Ltd
EVF4
English
Connecting External Power
1. External power is supplied through the use of the PA01 adapter.
2. Proper voltage for external power is 6-17V.
3. To install the PA01 adapter, first remove the battery from the body.
4. Connect the external power cable to the PA01 adapter, as illustrated in the picture below.
5. Install the PA01 adapter to the body using the same method as installing the battery.
6. You can use the Canon LP-E6 battery with the PA01 adapter installed.
Powering On/Off
1. Install the battery or connect external power.
2. Turn the power switch to the ON position.
3. A red light will indicate that the power and LCD is turned ON.
4. If you have an external input, you will see the image displayed from that signal. If there is
no external input, you will see the default screen.
5. Turn the power switch to the OFF position to turn off.
Before Using the EVF
ON
OFF
EVF4
SECULINE Co., Ltd
10 11
Before Using the EVF
Adjusting the Diopter
1. When viewing through the optical loupe, the user can adjust the diopter accordingly.
Turn on the EVF and verify the LCD image output.
2. Rotating the dial to the right will bring the eye cup towards you and rotating it to the left
will move the eye cup away from you.
3. Rotate the dial in either direction until the image becomes clear.
Connecting a HDMI Cable
1. Make sure the EVF input selection is set to HDMI. Please refer to 'Input Selection' on
page 13.
2. First connect the mini-HDMI cable to a camera, and then connect the other end into the
HDMI IN connection on the EVF.
3. Check whether the image on the LCD is correctly displaying the image on the camera. If
the image on the LCD is not displaying correctly, check the cable connections and/or
the camera to ensure all settings are correct.
SECULINE Co., Ltd
EVF4
English
Connecting an External Monitor (EVF4L)
1. The EVF4L model provides a HDMI loop-through function. The image on the LCD can
be directly looped to an external monitor via a separate mini-HDMI cable.
2. Connect the mini-HDMI input cable to the EVF HDMI in.
3. Connect a separate mini-HDMI cable from the EVF HDMI out to an external monitor.
4. If there is no input signal into the EVF, then there will be no image to the external
monitor.
5. The EVF4B model does not come with a loop-through function.
Connecting a Composite Cable
1. Make sure the EVF input selection is set to Composite. Please refer to 'Input Selection'
on page 13.
2. You can purchase a composite cable from Cineroid or use your own cable if it is similar
to the illustration below.
3. Insert the 3.5mm dia 4-pole plug into the rear of the EVF marked A/V in.
4. Check the image.
Before Using the EVF
3.5mm dia 4-pole plug
Left Audio
Video
Ground
Right Audio
EVF4
SECULINE Co., Ltd
M
ON
OFF
Up
Down
Menu
12 13
Operating the Menu
1. Access the setting and features by pressing the menu button on the left side of the EVF.
2. Press the M button to select the main menu. When not in the menu, you can adjust
the speaker volume by pressing the up and down arrow keys.
3. Once the main menu is selected, press the up and down arrow keys to navigate
through the menu. The cursor is highlighted in red.
4. Move the cursor to the feature you want to select/change and press the M button
to access that feature.
5. Press the up and down arrow keys to change the value of the feature.
6. Move the cursor to Exit and press the M button to return to the previous menu.
7. To exit the main menu, move the cursor to Exit and press the M button.
21
Basic Features
3
4
5
6
TIP: To exit out of the main menu immediately, press any of the buttons (PK, F1, F2,
SA) on the right side of the EVF.
Exit
Input Select
Color Adjust
Screen Adjust
Volume
Peaking
Saturation(Zebra)
Under Scan
4:3 Guide Bar
Pixel to Pixel
Ver 1.2
Exit
Input Select
Color Adjust
Screen Adjust
Volume
Peaking
Saturation(
Zebr
a)
Under Scan
4:3 Guide Bar
Pixel to Pixel
Exit
Input Select
Color A
djust
Screen Adjust
Volume
Peaking
Saturation(Zebra)
Under Scan
4:3 Guide Ba
r
Pixel to Pixel
Exit
HDMI
Composite
√
Exit
Input Select
Color A
djust
Screen Adjust
Volume
Peaking
Saturation(Zebra)
Under Scan
4:3 Guide Ba
r
Pixel to Pixel
Exit
HDMI
Composite
√
Exit
Input Select
Color Adjust
Screen Adjust
Volume
Peaking
Saturation(Zebra)
Under Scan
4:3 Guide Bar
Pixel to Pixel
Exit
HDMI
Composite
√
tip
SECULINE Co., Ltd
EVF4
English
Basic Features
Input Selection
1. You can choose between composite and HDMI for your external input selection.
2. The HDMI input can receive 480i, 480p, 576p, 720p and 1080i signals.
3. Press the M button for the main menu. Move the cursor to INPUT SELECT and press
the M button. Choose either HDMI or Composite.
4. Highlight and select Exit to return to the main menu.
3
Exit
Input Select
Color Adjust
Screen Adjust
Volume
Peaking
Saturation(Zebra
)
Under Scan
4:3 Guide Bar
Pixel to Pixel
Exit
Input Select
Color Adjust
Screen Adjust
Volume
Peaking
Saturation(Zebra
)
Under Scan
4:3 Guide Bar
Pixel to Pixel
Exit
HDMI
Composite
√
Adjusting Color
1. You can adjust the color of the LCD screen. Choose 0-50 for the color levels.
2. Press the M button for the main menu.
3. Select COLOR ADJUST and choose between Red, Green or Blue to adjust your colors.
4. A preview window will appear on the lower right portion of the screen as you
adjust your colors.
3
Exit
Input Select
Color Adjust
Screen Adjust
Volume
Peaking
Saturation(Zebra)
Under Scan
4:3 Guide Bar
Pixel to Pixel
Exit
Red
[1~50] 40
Green
[1~50] 35
Blue [1~50] 35
Color Preview
Preview
EVF4
SECULINE Co., Ltd
14 15
Basic Features
Volume Control
1. The EVF has a built-in speaker on the left side of the body and a headphone jack on the
right side.
2. You can adjust the master volume by pressing the up and down arrows on the left side of
the EVF when not in the main menu screen. You can also adjust the master volume within
the menu. Press the M button for the main menu. Select VOLUME and adjust with the
arrow keys.
3. The speaker and headphone volumes can be adjusted independently. To do so, you must
adjust the volume within the menu.
4. You can use the speaker and headphones simultaneously and you can also mute the
volume within the menu.
2
Exit
Input Select
Color Adjust
Screen Adjust
Volume
Peaking
Saturation(Zebra
)
Under Scan
4:3 Guide Bar
Pixel to Pixel
Exit
Speaker Mute ON
Speaker [1~25] 20
Headphone [1~25] 20
Adjusting the Screen
1. You can adjust the LCD brightness, contrast, and sharpness. Choose between 0-50
for the brightness and contrast and 0-10 for the sharpness.
2. Press the M button for the main menu.
3. Select SCREEN ADJUST choose between BRIGHTNESS, CONTRAST, and SHARPEN
to adjust your screen.
4. A preview window will appear on the lower right portion of the screen as you adjust
your screen.
3
Exit
Input Select
Color Adjust
Screen Adjust
Volume
Peaking
Saturation(Zebra
)
Under Scan
4:3 Guide Bar
Pixel to Pixel
Exit
Brightness
[1~50] 40
Contrast [1~50]
45
Sharpen [1~10] 05
Preview
Screen Preview
M
PK
F1
F2
SA
Headphone JackExternal Speaker
Master Volume
SECULINE Co., Ltd
EVF4
English
Peaking
1. The EVF provides the peaking feature in both the Red and Sharpness mode. The Red
mode displays in red and the Sharpness mode displays an outline in white.
2. To activate the peaking feature, simply press the PK button on the left side of the EVF
body. The peaking will show in the mode that is currently selected.
3. To change the peaking mode, press the M button for the main menu. Select PEAKING
from the menu and then select PEAKING MODE. Select R for Red or S for Sharpness
mode. You can also adjust the peaking threshold by selecting PEAKING THRESHOLD
and adjusting accordingly. The threshold range is 1-5 with 5 being the highest.
4. The peaking feature works only with HDMI input. It does not work with Composite.
Shooting Features
2
3
Peaking Red ON
PK
F1
F2
SA
Peaking Sharpness OFF Peaking Sharpness ON
Peaking Red OFF
Peaking Mode 설정
Exit
Input Select
Color Adjust
Screen Adjust
Volume
Peaking
Saturation(Zebra)
Under Scan
4:3 Guide Bar
Pixel to Pixel
Exit
Peaking Mode [R,S] R
Threshold
[1~5] 05
Peaking Mode : R → Red
S → Sharpness
tip
EVF4
SECULINE Co., Ltd
16 17
Underscan
1. You can view every corner of the image on the LCD by activating the underscan feature.
You can select the underscan feature from within the main menu or by custom setting the
F1 or F2 button.
2. When the underscan feature is activated, the entire image is slightly decreased in size
from the original.
Shooting Features
Underscan OFF Underscan ON
Saturation(Exposure)
1. You can use the saturation feature to determine proper exposure.
2. To activate the saturation feature, press the SA button on the left side of the EVF body.
Under exposed areas are displayed in white and over exposed areas are displayed in the
black diagonal lines.
3. Proper exposure is displayed in the opposite diagonal lines.
4. Pressing the M button while the saturation feature is activated will allow you to change the
over and under exposure saturation value. Press the up and down arrow buttons to change
the values and use the M button to alternate between the over exposure and under
exposure. You can also change the values from within the main menu.
5. Under exposure detection will be off if OFF under 0 is selected in unexposure threshold
setting. Over exposure detection will be off it OFF over 100 is selected in over exposure
threshold setting.
4
Saturation ON Saturation Value
2
PK
F1
F2
SA
Exit
Input Select
Color Adjust
Screen Adjust
Volume
Peaking
Saturation(Zebra
)
Under Scan ON
4:3 Guide Bar
Pixel to Pixel
SECULINE Co., Ltd
EVF4
English
Pixel to Pixel
1. Enabling pixel to pixel eliminates the need for you to zoom in/out of your native video.
2. If the native video is larger than the LCD resolution then that creates a zooming effect.
Conversely, if the native video is smaller than the LCD resolution then that creates
a scale-down effect.
3. The pixel to pixel feature only maps the center of the video image.
4. You can select either one-time mode or continuous mode pixel to pixel under Custom
Setup of the menu.
Shooting Features
Monochrome (B/W)
1. You can view the image on the LCD in B/W by activating the monochrome feature.
2. To activate the monochrome feature, press the M button for the main menu, select
MONOCHROME and turn the feature on. You can also assign this feature to one of the
custom buttons, F1 or F2, in order to activate the feature immediately.
Monochrome (B/W) ONMonochrome (B/W) OFF
Pixel to Pixel OFF Pixel to Pixel ON
Monochrome ON
Screen Filp
Status Display
Custom Setup
Exit
Input Select
Color Adjust
Screen Adjust
Volume
Peaking
Saturation(Zebra
)
Under Scan
4:3 Guide Bar
Pixel to Pixel ON
EVF4
SECULINE Co., Ltd
18 19
Screen Flip
1. You can flip the video image on the LCD screen 180 degrees vertically or horizontally
by activating the screen flip feature.
2. To flip the image horizontally, from the main menu select SCREEN FLIP then turn MIRROR
on.
3. To flip the image vertically, from the main menu select SCREEN FLIP then turn ROTATE on.
Shooting Features
4:3 Guide bar
1. The aspect ratio of the EVF screen is 16:9. Activating the guide bar will provide
a 4:3 ratio by making both ends of the screen area a little darker.
2. Once you active the guide bar from within the menu, the right side and left side of the
screen area will become slightly darker. The unchanged area of the screen is the 4:3
aspect ratio.
Mirror ON
Rotate ON / Mirror ON
Mirror OFF / Rotate OFF
4:3 Guide Bar OFF 4:3 Guide Bar ON
Rotate ON
Monochrome
Screen Filp
Status Display
Custom Setup
Exit
Mirror ON
Rotate OFF
Exit
Input Select
Color Adjust
Screen Adjust
Volume
Peaking
Saturation(Zebra
)
Under Scan
4:3 Guide Bar OFF
Pixel to Pixel
SECULINE Co., Ltd
EVF4
English
Setting User Controls
1 3
Custom Button Functions
1. The left side of the EVF body contains the buttons PK, F1, F2, SA. The factory default for
these buttons are peaking (PK), monochrome (F1), underscan (F2), and saturation (SA).
2. Each button can be customized to a particular feature by selecting CUSTOM SETUP on
the main menu.
3. Press the M button for the main menu then select CUSTOM SETUP.
4. Select one of the buttons (PK, F1, F2, SA) you wish to customize. Select from one of the
features listed to assign that feature to the selected button.
5. Exit out of the menu.
Peaking
Mono
chrom
e
Underscan
Satur
ation
PK
F1
F2
SA
Monochrome
Scre
en Filp
Status Display
Custom Setup
Exit
Freeze
Pixel to Pixel
Monochrome
4:3 Guide Bar
Under Scan
Screen Flip Mirror
Scre
en Flip Rotate
Brightness
Contrast
√
Exit
Pixel to Pixel
F1
F2
PK
SA
EVF4
SECULINE Co., Ltd
20 21
Setting User Controls
Custom Display Settings
1. You can select to view the current state of the battery usage, volume, etc. on the LCD.
2. Press the M button for the main menu and select STATUS DISPLAY to view the options.
3. Select ON or OFF for each item you want to view or not view on the LCD.
4. The pixel to pixel display only appears when the feature is activated.
OSD (On Screen Display) Color Settings
1. You can select what color you want the menu and other items to be displayed on the LCD.
2. Press the M button for the main menu and select STATUS DISPLAY then OSD COLOR.
Choose the color you want to use.
3. Confirm the new color in the LCD.
Status Display Menu Peaking ONPixel to Pixel ON
OSD Color Yellow
Monochrome B/W
Screen Filp
Status Display
Custom Setup
Exit
Pixel to Pixel ON
Battery Status
ON
Speaker Status ON
Video Format Display
ON
OSD Color Yellow
OSD Color Green
Monochrome B/W
Screen Filp
Status Display
Custom Setup
Exit
Pixel to Pixel ON
Battery Status
ON
Speaker Status ON
Video Format Display
ON
OSD Color Green
Monochrome B/W
Screen Filp
Status Display
Custom Setup
Exit
Pixel to Pixel ON
Battery Status
ON
Speaker Status ON
Video Format Display
ON
OSD Color White
OSD Color White
Monochrome B/W
Screen Filp
Status Display
Custom Setup
Exit
Pixel to Pixel ON
Battery Status
ON
Speaker Status ON
Video Format Display
ON
OSD Color White
Factory reset
1. Powering on the EVF while pressing down the PK button will reset the EVF to its original
default settings.
2. Once the reset is complete, fully power off the EVF before powering on for further use.
SECULINE Co., Ltd
EVF4
English
Product Specifications
LCD
Video output
Input
Audio out
Power
Operating Temperature
Storage Temperature
Power consumption
Size
Resolution
Color
Viewing angle
Display area
HDMI
Composite
HDMI
Phone Jack
Internal speaker
Battery
External
3.2inch TFT LCD
800 x 480
16.7M
H: 180 degrees, V: 180 degrees
69.6(H) x 41.76(V)mm
(480i/480p/576p/720p/1080i)
Video/Stereo Audio
(480i/480p/720p/1080i/1080p)
3.5φ Analog stereo
Mono Output
Small, Medium, Large
DC 6.0 ~ 17V by DC adapter(PA01)
-10℃ to 60℃
-20℃ to 70℃
3.5W(4hours with 2200mAH battery)
EVF4
SECULINE Co., Ltd
Optional Products
22 23
Mini ball head MBH-P
Mini ball head MBH-M
○Articulating Arm
External power or
Canon LP-E6 battery
can be used.
○HDMI Cable
Model Length
○Mini ball head
Model
Reinforced plastic
Metal
Weight Material
Model
Metal
Metal
Length
Length
Material
○External power adapter
RCA x 3EA
Plug form
Plug form
Model
SECULINE Co., Ltd
EVF4
English
MEMO
We will strive to create the best products
and provide superb service.
Customer Support Center
Seculine Co., LTD.
Tel +82.2.850.3021 / Fax +82.2.850.3027
Rm.510, Kolon Science Valley #2, Guro-dong, 811, Guro-gu, Seoul, 152-878, Korea
Homepage www.cineroid.com
E-mail support@secu-line.com
Printed in Korea
EVF1.0
Cineroid
Cineroid
E l e c t r o n i c V i e w F i n d e r
Loading...