Cineroid CL800 Safety Instructions And User Manual

RGBW full range with white light / Light weight metal panel

Metal Ballast / CRI 95 or above / Ball mount bracket with 16mm spigot

Color temperature 2700ºK ~ 6500ºK / Extension up to 10 meter

100% dimming / DMX Built-in / Battery charging / Real time synchro

Custom eect / 6 Preset reserve / USB 5V output / USB Firmware update

www.cineroid.com

cL800

Safety Instructions / User's Manual

Englis

h

FULL COLOR LED LIGHT

Cineroid CL800

Thank you for purchasing the Cineroid CL800.

The Cineroid CL800 is high quality RGBW soft light with portable size. Light weight and thin
panel makes easy to use and getting around any type, environment. Please thoroughly read the
user manual for best operation and understanding of all of the functions of the CL800.

Test Before Operating

It is recommended to test the CL800 before operating. Check if the CL800 can be turned on once
powered, and check if the information/menu is being properly displayed on the LCD.

2

FULL COLOR LED LIGHT

Cineroid CL800

Safety Precautions

Please observe the following safety precautions as they are meant for the safe and
proper use of the product to reduce the risk of accidents. Upon reading the user
manual, keep it in a safe and available place.

◎

Do not use any batteries, power cord, or accessories that are not specied in this

document.

when your hands are wet. When unplugging the power cord, grasp the plug body

or adapter instead of the cord.

◎

Power cords that are scratched, heavily bent or twisted can potentially be hazardous and

a source of electric shock and/or re.

◎

Do not insert foreign objects into the product’s electric or cable components.

◎

Do not place the power cord near sources of heat as this may melt or cause damage to

the cord potentially causing re or electric shock.

◎

Do not disassemble or modify the product. This may damage the product and cause

danger due to a malfunction.

◎

Please keep the product out of reach of young children. Injuries may occur due to damage

to the product.

◎

When using the product in an airplane or hospital setting, it is recommended to acquire

authorization rst as signals or electro-magnetic waves from the product may cause other

equipment to malfunction.

◎

Do not store the product in a dusty or humid environment as damage may occur.

◎

When the product is mounted on a camera, do not lift or move the camera by grabbing

the product. This may cause damage to the product or the camera mount.

◎

Do not clean the product with paint thinner, benzene, or other volatile solvents. This may

cause damage to the product and become a re hazard.

◎

This product is not waterproof. If the product is dropped in water, contact the service

center immediately.

English

3

FULL COLOR LED LIGHT

Table of Contents

Cineroid CL800

Safety Precautions

Table of Contents

Package Contents

Components of each Models

Name of each part

Before Using CL800

Connect LED Panel to the Ballast

Input the Power by DC

Input the Power by Battery

Power On / O

Charging the Battery

USB and D-Tap Output

3

4

6

7

8

11

12

12

13

13

13

Set the Soft Box

4

14

FULL COLOR LED LIGHT

Operating CL800

Cineroid CL800

Basic Operation

CCT Mode (White Color)

RGB Mode

Hue/Sat Mode

Preset

Eect Mode

User Eect Mode

System

Firmware Update

Color Unit

Master / Slave

DMX

Specications

15

16

17

18

19

20

20

21

21

22

22

23

English

Optional Accessoires

23

5

FULL COLOR LED LIGHT

Package Contents

LED Panel Ballast

Cineroid CL800

H-Bracket AC Adapter

Soft Diuser Manual Carrying Bag

Extension Cable

6

FULL COLOR LED LIGHT

Components of each Models

Please ensure all parts are present after opening the box.

Cineroid CL800

CL800 Single Set

CL800V

CL800G

CL800N

CL800 3 Set

CL800-3V

CL800-3G

CL800N-3N

English

LED Panel, Ballast(V-Battery Mount), Soft Diffuser, Bracket
with spigot, AC Adapter, Carrying Bag, Manual

LED Panel, Ballast(G-Battery Mount), Soft Diffuser, Bracket
with spigot, AC Adapter, Carrying Bag, Manual

LED Panel, Ballast(without Batter y Mount), Soft Diffuser,
Bracket with spigot, AC Adapter, Carrying Bag, Manual

LED Panel x3, Ballast(V-Battery Mount) x3, Soft Diuser x3,
Bracket with spigot x3, AC Adapter x3, Carrying Bag, Manual

LED Panel x3, Ballast(G-Battery Mount) x3, Soft Diuser x3,
Bracket with spigot x3, AC Adapter x3, Carrying Bag, Manual

LED Panel x3, Bal last(wit hout Batter y Mount) x3, Soft
Diuser x3, Bracket with spigot x3, AC Adapter x3, Carrying
Bag, Manual

7

FULL COLOR LED LIGHT

Name of each part

ro

c

l

e

V

L

”

4

/

1

He

l

l

Ba

m

m

6

1

C

n

i

p

6

Cineroid CL800

LED Panel with Bracket

ro

c

l

e

V

r

ve

e

b

n

o

K

d

a

t

o

g

i

p

S

e

l

a

m

e

f

r

o

ct

e

n

n

o

Set LED Panel on the Bracket

To combine the LED panel with the bracket,
rotate the 4 screws of the bracket by pressing
and screwing them together.

8

FULL COLOR LED LIGHT

Name of each part

Cineroid CL800

Ballast

Preset Buttons

DMX In

Color Display

LED Panel Port

DMX Out

D-Tap Output

1/4” Mount

Setting Lock Lamp

Setting Wheel Button

Setting Lock Button

Battery Mount

Brightness Lock Button

Brightness Wheel Button

Brightness Lock Lamp

Enter/Exit Button

Mode Button

English

DC Input

Battery Charge Switch

Power Switch

USB Output

DMX Master / Slave

Battery Latch

9

FULL COLOR LED LIGHT

Before Using CL800

1

Cineroid CL800

10

2

1

3

FULL COLOR LED LIGHT

Before Using CL800

1

Connect LED Panel to the Ballast

Connect the LED panel and ballast connectors.
And then screw the nut to tight. It can be used
extension cable between connectors.(optional)

2

Input the Power by DC

Connect the LED panel and ballast connectors.
And then screw the nut to tight.

Cineroid CL800

English

11

FULL COLOR LED LIGHT

Before Using CL800

2

Input the Power by Battery (FL-DV/FL-DG)

Insert the correct type battery to the battery port.
Turn on the power button to check the LCD.
When removing the battery, press the detach latch and
remove the battery in reverse order of mounting.

Power On / O

3

Press the button to turn on the controller.
The CINEROID logo appears briefly on the
controller screen.

Cineroid CL800

Battery Latch

12

FULL COLOR LED LIGHT

Before Using CL800

4

Charging the Battery

Connect the battery to the ballast, turn o the power
switch while DC power is connected, and turn on the
Charging switch. When the battery is charging, a red
battery icon appears on the display. When charging is
complete, the green battery icon is displayed.

3

1

2

5

USB and D-Tap Output

The controller can be used as USB or D tap output.
Connect the power to the controller and use it with the
switch turned on.

Cineroid CL800

English

D-Tap Output USB 5V Output

13

FULL COLOR LED LIGHT

Soft Box Body

Before Using CL800

6

Set the Soft Box

Install the Soft Box Body rst. Open Soft Box Body and
attach it to the Velcro on the back of the LED panel.
After installing the Soft Box Body, cover the Soft Diuser
to the Velcro outside Soft Box Body.

Cineroid CL800

14

FULL COLOR LED LIGHT

Operating CL800

1

Basic Operation

Cineroid CL800

DMX-1 Unit [%]

DMX-1 Unit [%]

CCT MODE

CCT MODE

RGB MODE

RGB MODE

HUE/SAT MODE

HUE/SAT MODE

EFFECT MODE

EFFECT MODE

USER EFFECT

USER EFFECT

SYSTEM SET

SYSTEM SET

1

6

2
3

4

1. Access the LED mode menu by pressing the mode button on Ballast.

2. Turn the Setting Button to set the value and press the Setting Button
to complete the setting.

3. Press Exit Button to return to the previous screen.

4. Brightness Wheel is only used to adjust the brightness.

5. You can lock the setting button and brightness respectively. When
the button is pressed, the corresponding Lock Button Lamp lights
and the button can not be operated. Press it again to release the lock.

English

5

Pressing Setting button

15

FULL COLOR LED LIGHT

Operating CL800

2

CCT Mode (White Color)

①

Brightness

Turning the brightness wheel button to the
right to increase brightness. Turn to the left
to decrease brightness. You can adjust the
Brightness by 0~100% dimming.

②

Color Temperature

Turn the Setting Button to the right increases
Color temperature and left decreases Color
temperature. You can adjust color temperature
from 270 0°K to 6500°K by Setting Wheel
Button in CCT mode.

1

2

Cineroid CL800

DMX-1
[CCT MODE]

Unit [%]

48 %

4500 K

16

PN-CL800

G

R

R

B

Wh

i

te

(D

aylig

h

t/Tu

n

gsten

)

FULL COLOR LED LIGHT

Operating CL800

RGB Mode

3

①

Brightness

Tu rn the Br ightn ess W he el to adj ust th e
brightness. Brightne ss can be set from 0 to
100%. The current color is displayed next to the
brightness indicator.

Current Color

DMX-1
[RGB MODE]

Cineroid CL800

Unit [RGB]

31 %

English

1

②

Internal Preset Color

Select Internal Preset Color. The information of the
12 internal preset color values is displayed in the
lower RGB boxes respectively.

③

Color manual setting

You can specify RGB color values manually. Red,
Green, Blue Specify a value for each color.

④

White Color intensify

White color can be added to or subtracted from
the RGB color value. White Color Intensify Sets the
ratio values of RGB and White Color in the graph.

⑤

White Color temperature

Sets the Color Temperature of the White Color. It
can be set from 2700 to 6500K.

⑥

Color History

Please refer to ④ on next page.

2

R

G

B

RGB

>>Color History

DMX-1
[RGB MODE]

R

3

G

B

4

RGB

>>Color History

6

50 % 50 %

CCT 3300 K

Unit [RGB]

31 %

75 % 25 %

CCT 3300 K

255

0

105
0
W

255
105
0
W

5

17

FULL COLOR LED LIGHT

Operating CL800

Hue/Sat Mode

4

①

Brightness

Tur n the Brightne ss Whe el to adjus t the
brightness. Brightness can be set from 0 to
100%. The current color is displayed next to
the brightness indicator.

②

Internal Preset Color

Select Internal Preset Color. Information on the
12 internal Preset Color values is displayed in
the lower HUE and SAT boxes respectively.

③

Hue / Saturation

Set HUE and SAT values.
HUE can be set from 0 ° to 359 °,
and SAT can be set from 0 to 100%.

④

Color History

Color values executed for more than 30
seconds in RGB and HUE/SAT modes are
automatically saved up to 36 Color History.
You can check the color and information of
the saved values in Color History. You can also
select and re-use it.

Current Color

DMX-1
[HUE / SAT]

2

HUE

3

SAT

>>Color History

4

Seleted Color

DMX-1
[COLOR HISTORY]

Cineroid CL800

Unit [%]

52 %

o

145

%82

Unit [%]

RGB

R[105]
G[185]
B[69]

1

18

Color Information

FULL COLOR LED LIGHT

Operating CL800

Tip

*

Preset

Preset 6 of the RGB colors that you use often, you can conveniently use.
1 ~ 6 Press Preset Button for 1 sec. And the current value will be set in the preset.
Press briey to run.

①

Preset CCT

Mode - CCT Mode - Save or Run

②

Preset RGB

Mode -RGB Mode - Save or Run

③

Preset HUE/SAT

Mode -HUE/SAT Mode - Save or Run

3

s

e

c

.

Save Preset

Cineroid CL800

English

Preset 1

Preset 2

Preset 3

DMX-1

Unit [%]

[RGB MODE]

R

G

B

50 % 50 %

RGB

>>Color History

73 %

0
80
100
W

CCT 3300 K

Preset 4

Preset 5

Preset 6

19

FULL COLOR LED LIGHT

Operating CL800

5

Eect Mode

Indicates lighting eects according to the situation.
Repeat with a certain pattern.

Cineroid CL800

①

Select the Ecet

Green cursor appears under the effect
name you are selecting.
You can select the arrow to move to the
next or previous page.

②

Repeat Rate

Sets the repetition rate of the eect.

③

Brightness

You can adjust the brightnes s of the
eect by using the Brightness Wheel.

6

User Ecet Mode

Use the user-created eect manually.

Connecting USB Memory

DMX-1 Unit [%]

Thunder Bolt
Night Club
Camp Fire
Mercury Lamp
Moon Light

RGB Light

<< 1 / 2 >>

SPEED

MIN MAX

Brightness

Save the set le to USB memory.
Connect to USB port and save to Ballast.
(Access : Mode-System set-Custom Data Update)

13 %

1

2
3

20

FULL COLOR LED LIGHT

System

1

Firmware Update

Download new firmware data to USB memory

①

through Cineroid homepage.

Connect USB memory that contains firmware

②

data to Ballast.

If you click F/W Update in System, the update

③

will start automatically. When the update is nished,
ballast restarts.

2

Color Unit

The value of RGB mode, you can display and change the percentage
values or RGB values. (Access : Mode - System set - Color Unit)

DMX-1

Unit [%]

[RGB MODE]

50 %

Color Unit
[%]

DMX-1
[RGB MODE]

Cineroid CL800

Unit [RGB]

Color Unit

50 %

[RGB]

English

100

R

G

B

50 % 50 %

RGB

>>Color History

CCT 3300 K

Percentage Mode Numeric Mode

41
70

W

%
%
%

Color Value
[0~100 %]

R

G

B

50 % 50 %

RGB

>>Color History

255
104
178

CCT 3300 K

W

Color Value
[0~255]

21

FULL COLOR LED LIGHT

System

3

Master / Slave

You can control multiple CL800 simultaneously by
operating one CL800.

Connect the ballast to be used as master and the

①

ballast to be used as slave by using RJ45 cable.

In mode, specify master ballast and slave ballast.

②

(Access : Mode - System set - DMX Set - Sync Maseter
or Sync Slave)

When master ballast is operated, slave ballast is

③

operated together. The current mode is displayed at
the top of the screen.

4

DMX

DMX 512 channels and DMX controllers can be
used to control multiple CL800s simultaneously.

Connect the DMX controller to the CL800 Ballast

①

using an XLR 5pin cable.

Set the DMX channel you want to use.

②

(Access : Mode - System set - DMX Set - DMX)

Set the DMX mode. The functions of the selected

③

mode from the selected channel are sequentially
as si gn ed to th e channe l. T he cur rent mo de is
displayed at the top of the screen.

Cineroid CL800

MASTER Unit [%]

DMX

SYNC MASTER

SYNC SLAVE

DMX-5 Unit [%]

DMX MODE 5

CH 97:

DIM

CH 98:

RED

CH 99:

GREEN

CH 100:

BLUE

START
CHANNEL

=

97

22

FULL COLOR LED LIGHT

Specications

Cineroid CL800

LED Panel

Dimension

Weight

Dimming

Photometric

Color Temperature

LED Cells

CRI

Power

Optional Accessoires

ECF603 ECF605

Extension Cable (3m)

460 x 240 mm

600 g

0~100%

3400 lux

2700ºK ~ 6500ºK

2080

95 or above

120W

Metal Ballast

Dimension
Weight
Dimming
CCT
Display
Cable Length
Control Lock
DMX
DC Input

Extension Cable (5m)

170 x 86 x 70 mm
500 g
0~100%
2700ºK ~ 6500ºK
Color LCD

(can be extended)

2m
Yes
512 Channel
11~17 V

ECF610

Extension Cable (10m)

English

23

Customer Support Center

Made in Korea

CL800_1.0

SECULINE CO., Ltd

Tel. [phone] Fax. [phone] E-mail. [e-mail]
Rm 1105, Ace techno tower 8th, 11, Digital-ro 33-gil, Guro-gu, Seoul, Republic of Korea 08380