Cincoze CV-108R-R10/P1001, CV-108R-R10/P1001E, CV-110R-R10/P1001, CV-110C-R10/P1001E, CV-110HR-R10/P1001 User Manual

CV-100/P1000 Series

Industrial Panel PC

| User’s Manual

2

Contents

Prefaces

Revision …………………………………………………..……………….….…….. 04
Copyright Notice …………………………………………………………………… 04

Acknowledgement ……………………………………………………..................... 04

Disclaimer ………………………………………………………….……………….. 04

Declaration of Conformity ……………………………………….………………… 04
Product Warranty Statement ……………………………………….…………….. 05
Technical Support and Assistance ………………………………….……………. 06
Conventions Used in this Manual …………………………………….………….. 06
Safety Precaution …..…………………………………….…………….………….. 07
Package Contents ……………………………………………….……….………… 08

Optional Accessories …………………………………………….……….………… 08
Ordering Information …………………………………………….……….………… 09

Chapter 1 Product Introductions

1.1 Overview & Hardware Specification …..…………………………….. 13

1.1.1 CV-108/P1001 ………………………………..………….…....... 14

1.1.2 CV-110/P1001 ………………………………..………….…....... 18

1.1.3 CV-112/P1001 ………………………………..………….…....... 22

1.1.4 CV-115/P1001 ………………………………..………….…....... 26

1.1.5 CV-W115/P1001 ……………………………..………….…....... 30

1.1.6 CV-117/P1001 ………………………………..………….…....... 34

1.1.7 CV-119/P1001 ………………………………..………….…....... 38

1.1.8 CV-W121/P1001 ………….…………………..……..……....... 42

1.2 System I/O ……………………………………………………………… 46

1.2.1 Front ……………………………………………………………… 46

1.2.2 Rear ………………………………………………………………. 47

1.2.3 Side (Left) ………………………………………………………… 48

1.2.4 Side (Right) ………………………………………………………. 49

1.2.5 Top ………………………………………………………………… 50

Chapter 2 Jumpers and Connectors

2.1 Jumper Settings ……………………………………………………...... 52

2.2 Locations of the Jumper and Connector …………………………..... 52

2.2.1 Top View …………………………………………………………. 52

2.2.2 Bottom View ……………………………………………………... 53

2.3 Connector / Jumper / Switch Definition …….…….…….……………...54

2.4 Switches Definition …………….…………........................................ 55

2.5 Jumpers Definition …………..……………........................................ 56

2.6 Connectors Definition ………………………….................................. 56

Chapter 3 System Setup

3.1 Removing the Top Cover ……...…………………………..…………... 65

3.2 Installing a Half Size Mini PCIe Card ……………………………….... 66

3.3 Installing a Full Size Mini PCIe Card ………………....…………….... 67

3.4 Installing Antennas …………………………………..….…………….... 68

3.5 Installing a SO-DIMM ……………………………………....…….….... 70

3.6 Installing the Top Cover …………………………….….…………….... 71

3.7 Installing a SATA Hard Drive ………………………..….……………... 72

3.8 Installing a SIM Card ………………………………..….……………… 73

3.9 Installing a CFast Card …..…….…………..………..….……………... 74

3.10 Connecting with CV Display Module ….…………..….…………….... 75

CV-100/P1000 Series

Industrial Panel PC

| User’s Manual

3

Chapter 4 BIOS Setup

4.1 BIOS Introduction …….……….…………….…….…..….…………... 78

4.2 Main Setup ……..……….………………….…..….………………...... 79

4.2.1 System Date …….…………………………………………….... 79

4.2.2 System Time ………..…………………………………………... 79

4.3 Advanced Setup ……………………………………………………….. 80

4.3.1 ACPI Settings ……..……………………………………………. 80

4.3.2 Super IO Configuration ………………………………………... 81

4.3.3 Hardware Monitor …………………………………………….... 83

4.3.4 Serial Port Console Redirection ……………..……………..... 83

4.3.5 CPU Configuration ……………………………..………….….... 84

4.3.6 Thermal Configuration ……..…………………………………... 85

4.3.7 SATA Configuration …………………………………………….... 86

4.3.8 OS Selection ……………………………………………..………. 87

4.3.9 Compatibility Support Module Configuration ………..………. 88

4.3.10 USB Configuration …………………………………………….. 89

4.4 Chipset …………...……….………………….…..….…..……………... 90

4.4.1 North Bridge ………….………………………………………….. 90

4.4.2 South Bridge ………….………………………………………….. 92

4.5 Security …………...……….………………….…..….…..……………... 94

4.5.1 Administrators Password …….………………………………….. 94

4.5.2 Users Password …….……………………………………….….. 94

4.6 Boot …………...……….….………………….…..….…..……………... 95

4.6.1 Setup Prompt Timeout ………………………………………….. 95

4.6.2 Bootup NumLock State …………………………………………. 95

4.6.3 Full Screen Logo Show …………………………………………. 95

4.6.4 Fast Boot …………………………………………………………. 95

4.7 Save & Exit …...……….….………………….…..….…..…………….... 96

4.7.1 Save Changes and Reset ……………..……………………...... 96

4.7.2 Discard Changes and Reset ……………………………………. 96

4.7.3 Restore Defaults …………………………………………………. 96

4.7.4 Save as User Defaults ……………………………………………96

4.7.5 Restore User Defaults ……………………………………………96

Chapter 5 Product Application

5.1 Digital I/O (DIO) application …..…………………….…..….………….. 98

5.1.1 Digital I/O Programming Guide ………………………………... 98

5.2 Digital I/O (DIO) Hardware Specification …………………………….. 103

Appendix Panel Mount Procedures …………….………………………..... 107

CV-100/P1000 Series

Industrial Panel PC

| User’s Manual

4

Revision

Copyright Notice

© 2016 by Cincoze Co., Ltd. All rights are reserved. No parts of this manual may be copied, modified,

or reproduced in any form or by any means for commercial use without the prior written permission of
Cincoze Co., Ltd. All information and specification provided in this manual are for reference only and
remain subject to change without prior notice.

Acknowledgement

Cincoze is a registered trademark of Cincoze Co., Ltd. All registered trademarks and product names
mentioned herein are used for identification purposes only and may be trademarks and/or registered
trademarks of their respective owners.

Disclaimer

This manual is intended to be used as a practical and informative guide only and is subject to change

without notice. It does not represent a commitment on the part of Cincoze. This product might include
unintentional technical or typographical errors. Changes are periodically made to the information
herein to correct such errors, and these changes are incorporated into new editions of the publication.

Declaration of Conformity

Preface

FCC

This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.

CE

The product(s) described in this manual complies with all application European Union
(CE) directives if it has a CE marking. For computer systems to remain CE compliant,
only CE-compliant parts may be used. Maintaining CE compliance also requires proper
cable and cabling techniques.

Revision

Description

Date

1.0

Manual Released

2014/10/30

1.1

New Display modules Released

2015/01/13

1.2

CV

-110H/P1000 and CV-112H/P1000

Product Info and

Mechanical Dimensions Added

2015/12/10

1.3

CV

-W121/P1000

Product Info and

Mechanical Dimensions Added

2016/11/2

1.4

Revise Operating Temperature

2016/12/22

Prefaces

CV-100/P1000 Series

Industrial Panel PC

| User’s Manual

5

Product Warranty Statement

Warranty

Cincoze products are warranted by Cincoze Co., Ltd. to be free from defect in materials and
workmanship starting from the date of purchase by the original purchaser. The actual warranty period
of Cincoze products vary with product categories. During the warranty period, we shall, at our option,
either repair or replace any product that proves to be defective under normal operation.
Defects, malfunctions, or failures of the warranted product caused by damage resulting from natural

disasters (such as by lightening, flood, earthquake, etc.), environmental and atmospheric disturbances,

other external forces such as power line disturbances, plugging the board in under power, or incorrect
cabling, and damage caused by misuse, abuse, and unauthorized alteration or repair, and the product
in question is either software, or an expendable item (such as a fuse, battery, etc.), are not warranted.

Product Warranty Period:

RMA

Before sending your product in, you will need to fill in Cincoze RMA Request Form and obtain a RMA
number from us. Our staff is available at any time to provide you with the most friendly and immediate
service.

 RMA Instruction

 Customers must fill in Cincoze Return Merchandise Authorization (RMA) Request Form and

obtain a RMA number prior to returning a defective product to Cincoze for service.

 Customers must collect all the information about the problems encountered and note anything

abnormal and describe the problems on the “Cincoze Service Form” for the RMA number apply

process.

 Charges may be incurred for certain repairs. Cincoze will charge for repairs to products whose

warranty period has expired. Cincoze will also charge for repairs to products if the damage

resulted from acts of God, environmental or atmospheric disturbances, or other external forces
through misuse, abuse, or unauthorized alteration or repair. If charges will be incurred for a

repair, Cincoze lists all charges, and will wait for customer’s approval before performing the

repair.

 Customers agree to insure the product or assume the risk of loss or damage during transit, to

prepay shipping charges, and to use the original shipping container or equivalent.

 Customers can be send back the faulty products with or without accessories (manuals, cable,

etc.) and any components from the system. If the components were suspected as part of the
problems, please note clearly which components are included. Otherwise, Cincoze is not
responsible for the devices/parts.

 Repaired items will be shipped along with a "Repair Report" detailing the findings and actions

taken.

Limitation of Liability

Cincoze’ liability arising out of the manufacture, sale, or supplying of the product and its use, whether

based on warranty, contract, negligence, product liability, or otherwise, shall not exceed the original

selling price of the product. The remedies provided herein are the customer’s sole and exclusive

remedies. In no event shall Cincoze be liable for direct, indirect, special or consequential damages
whether based on contract of any other legal theory.

Prefaces

Product Category Warranty Period

PC Module 2 Years

Display Module 1 Year

CV-100/P1000 Series

Industrial Panel PC

| User’s Manual

6

Technical Support and Assistance

1. Visit the Cincoze website at www.cincoze.com/support.php where you can find the latest
information about the product.

2. Contact your distributor or our technical support team or sales representative for technical support
if you need additional assistance. Please have following information ready before you call:

 Product name and serial number

 Description of your peripheral attachments
 Description of your software (operating system, version, application software, etc.)
 A complete description of the problem
 The exact wording of any error messages

Conventions Used in this Manual

Prefaces

This indication alerts operators to an operation that, if not strictly
observed, may result in severe injury.

WARNING

This indication alerts operators to an operation that, if not strictly
observed, may result in safety hazards to personnel or damage to
equipment.

CAUTION

This indication provides additional information to complete a task easily.

NOTE

CV-100/P1000 Series

Industrial Panel PC

| User’s Manual

7

Safety Precaution

Before installing and using this device, please note the following precautions:

1. Read these safety instructions carefully.

2. Keep this User’s Manual for future reference.

3. Disconnected this equipment from any AC outlet before cleaning.

4. For plug-in equipment, the power outlet socket must be located near the equipment and must be
easily accessible.

5. Keep this equipment away from humidity.

6. Put this equipment on a reliable surface during installation. Dropping it or letting it fall may cause
damage.

7. Make sure the voltage of the power source is correct before connecting the equipment to the
power outlet.

8. Use a power cord that has been approved for using with the product and that it matches the

voltage and current marked on the product’s electrical range label. The voltage and current rating

of the cord must be greater than the voltage and current rating marked on the product.

9. Position the power cord so that people cannot step on it. Do not place anything over the power

cord.

10.All cautions and warnings on the equipment should be noted.

11.If the equipment is not used for a long time, disconnect it from the power source to avoid damage
by transient overvoltage.

12.Never pour any liquid into an opening. This may cause fire or electrical shock.

13.Never open the equipment. For safety reasons, the equipment should be opened only by qualified
service personnel.

If one of the following situations arises, get the equipment checked by service personnel:

 The power cord or plug is damaged.
 Liquid has penetrated into the equipment.
 The equipment has been exposed to moisture.
 The equipment does not work well, or you cannot get it to work according to the user's manual.
 The equipment has been dropped and damaged.
 The equipment has obvious signs of breakage.

14. CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or

equivalent type recommended by the manufacturer.

Prefaces

CV-100/P1000 Series

Industrial Panel PC

| User’s Manual

8

Package Contents

Before installation, please ensure all the items listed in the following table are included in the package.

Prefaces

Item Description Q’ty

1 Panel PC 1

2 Panel Mounting Kit 1

3 Utility DVD Driver 1
4 DIO Terminal Block Connector 1
5 Power Terminal Block Connector 1
6 Screw Pack 1

Note: Notify your sales representative if any of the above items are missing or damaged.

Optional Accessories

Model No. Description

GSM60A12-CIN

Adapter AC/DC 12V 5A 60W with 3pin Terminal Block Plug 5.0mm Pitch

SL2-SL3

US 2 heads power cord, US B type to IEC C13, SVT 18AWG/3C Black 1.8M

SL6-SL3

EU 2 heads power cord, EU G type to IEC C13, H05VV-F 0.75mm2/3G Black 1.8M

QP026-SL3

UK 2 heads power cord, UK I type to IEC C13, H05VV-F 0.75mm2/3G Black 1.8M

CV-100/P1000 Series

Industrial Panel PC

| User’s Manual

9

Prefaces

Ordering Information

Model No. Description

CV

-108R-R10/P1001

8.4" TFT SVGA 4:3 Panel PC with Resistive 5

-wire Touch, w/ Intel Atom E3845 Quad

Core, 4x USB, 2x COM, 1x VGA and 1x DisplayPort

CV

-108R-R10/P1001E

8.4" TFT SVGA 4:3 Panel PC with Resistive 5

-wire Touch, w/ Intel Atom E3845 Quad

Core, 4x USB, 2x COM, 1x VGA and 1x DisplayPort and 2x Universal bracket

CV

-110R-R10/P1001

10.4" TFT SVGA 4:3 Panel PC with Resistive 5

-wire Touch, w/ Intel Atom E3845 Quad

Core, 4x USB, 2x COM, 1x VGA and 1x DisplayPort

CV

-110R-R10/P1001E

10.4" TFT SVGA 4:3 Panel PC with

Resistive 5-wire Touch, w/ Intel Atom E3845 Quad

Core, 4x USB, 2x COM, 1x VGA and 1x DisplayPort and 2x Universal bracket

CV

-110C-R10/P1001

10.4" TFT SVGA 4:3 Panel PC with Projected Capacitive Touch, w/ Intel Atom E3845
Quad Core, 4x USB, 2x COM, 1x VGA and 1x DisplayPort

CV

-110C-R10/P1001E

10.4" TFT SVGA 4:3 Panel PC with Projected Capacitive Touch, w/ Intel Atom E3845
Quad Core, 4x USB, 2x COM, 1x VGA and 1x DisplayPort and 2x Universal bracket

CV

-110HR-R10/P1001

10.4" TFT XGA 4:3 Panel PC with Resistive 5

-wire Touch, w/ Intel Atom E3845 Quad

Core, 4x USB, 2x COM, 1x VGA and 1x DisplayPort

CV

-110HR-R10/P1001

10.4" TFT XGA 4:3 Panel PC with Resistive 5

-wire Touch, w/ Intel Atom E3845 Quad

Core, 4x USB, 2x COM, 1x VGA and 1x DisplayPort and 2x Universal bracket

CV

-110HC-R10/P1001

10.4" TFT XGA 4:3 Panel PC with Projected Capacitive Touch, w/ Intel Atom E3845
Quad Core, 4x USB, 2x COM, 1x VGA and 1x DisplayPort

CV

-110HC-R10/P1001E

10.4" TFT XGA 4:3 Panel PC with Projected Capacitive Touch, w/ Intel Atom E3845
Quad Core, 4x USB, 2x COM, 1x VGA and 1x DisplayPort and 2x Universal bracket

CV

-112R-R10/P1001

12.1" TFT SVGA 4:3 Panel PC with Resistive 5

-wire Touch, w/ Intel Atom E3845 Quad

Core, 4x USB, 2x COM, 1x VGA and 1x DisplayPort

CV

-112R-R10/P1001E

12.1" TFT SVGA 4:3 Panel PC with Resistive 5

-wire Touch, w/ Intel Atom E3845 Quad

Core, 4x USB, 2x COM, 1x VGA and 1x DisplayPort and 2x Universal bracket

CV

-112C-R10/P1001

12.1" TFT SVGA 4:3 Panel PC with Projected Capacitive Touch, w/ Intel Atom E3845
Quad Core, 4x USB, 2x COM, 1x VGA and 1x DisplayPort

CV

-112C-R10/P1001E

12.1" TFT SVGA 4:3 Panel PC with Projected Capacitive Touch, w/ Intel Atom E3845
Quad Core, 4x USB, 2x COM, 1x VGA and 1x DisplayPort and 2x Universal bracket

CV-100/P1000 Series

Industrial Panel PC

| User’s Manual

10

Prefaces

Ordering Information

Model No. Description

CV

-112HR-R10/P1001

12.1" TFT XGA 4:3 Panel PC with Resistive 5

-wire Touch, w/ Intel Atom E3845 Quad

Core, 4x USB, 2x COM, 1x VGA and 1x DisplayPort

CV

-112HR-R10/P1001E

12.1" TFT XGA 4:3 Panel PC with Resistive 5

-wire Touch, w/ Intel Atom E3845 Quad

Core, 4x USB, 2x COM, 1x VGA and 1x DisplayPort and 2x Universal bracket

CV

-112HC-R10/P1001

12.1" TFT XGA 4:3 Panel PC with Projected Capacitive Touch, w/ Intel Atom E3845
Quad Core, 4x USB, 2x COM, 1x VGA and 1x DisplayPort

CV

-112HC-R10/P1001E

12.1" TFT XGA 4:3 Panel PC with Projected Capacitive Touch, w/ Intel Atom E3845
Quad Core, 4x USB, 2x COM, 1x VGA and 1x DisplayPort and 2x Universal bracket

CV

-115R-R10/P1001

15" TFT XGA 4:3 Panel PC with Resistive 5

-wire Touch, w/ Intel Atom E3845 Quad

Core, 4x USB, 2x COM, 1x VGA and 1x DisplayPort

CV

-115R-R10/P1001E

15" TFT XGA 4:3 Panel PC with Resistive 5

-wire Touch, w/ Intel Atom E3845 Quad

Core, 4x USB, 2x COM, 1x VGA and 1x DisplayPort and 2x Universal bracket

CV

-115C-R10/P1001

15" TFT XGA 4:3 Panel PC with Projected Capacitive Touch, w/ Intel Atom E3845 Quad
Core, 4x USB, 2x COM, 1x VGA and 1x DisplayPort

CV

-115C-R10/P1001E

15" TFT XGA 4:3 Panel PC with Projected Capacitive Touch, w/ Intel Atom E3845 Quad
Core, 4x USB, 2x COM, 1x VGA and 1x DisplayPort and 2x Universal bracket

CV

-W115R-R10/P1001

15.6" TFT WXGA 16:9 Panel PC with Resistive 5

-wire Touch, w/ Intel Atom E3845

Quad Core, 4x USB, 2x COM, 1x VGA and 1x DisplayPort

CV

-W115R-R10/P1001E

15.6" TFT WXGA 16:9 Panel PC with Resistive 5

-wire Touch, w/ Intel Atom E3845

Quad Core, 4x USB, 2x COM, 1x VGA and 1x DisplayPort and 2x Universal bracket

CV

-W115C-R10/P1001

15.6" TFT WXGA 16:9 Panel PC with Projected Capacitive Touch, w/ Intel Atom E3845
Quad Core, 4x USB, 2x COM, 1x VGA and 1x DisplayPort

CV

-W115C-R10/P1001E

15.6" TFT WXGA 16:9 Panel PC with Projected Capacitive Touch, w/ Intel Atom E3845
Quad Core, 4x USB, 2x COM, 1x VGA and 1x DisplayPort and 2x Universal bracket

CV

-117R-R10/P1001

17" TFT SXGA 5:4 Panel PC with Resistive 5

-wire Touch, w/ Intel Atom E3845 Quad

Core, 4x USB, 2x COM, 1x VGA and 1x DisplayPort

CV

-117R-R10/P1001E

17" TFT SXGA 5:4 Panel PC with Resistive 5

-wire Touch, w/ Intel Atom E3845 Quad

Core, 4x USB, 2x COM, 1x VGA and 1x DisplayPort and 2x Universal bracket

CV-100/P1000 Series

Industrial Panel PC

| User’s Manual

11

Prefaces

Ordering Information

Model No. Description

CV

-117C-R10/P1001

17" TFT SXGA 5:4 Panel PC with Projected Capacitive Touch, w/ Intel Atom E3845
Quad Core, 4x USB, 2x COM, 1x VGA and 1x DisplayPort

CV

-117C-R10/P1001E

17" TFT SXGA 5:4 Panel PC with Projected Capacitive Touch, w/ Intel Atom E3845
Quad Core, 4x USB, 2x COM, 1x VGA and 1x DisplayPort and 2x Universal bracket

CV

-119R-R10/P1001

19" TFT SXGA 5:4 Panel PC with Resistive 5

-wire Touch, w/ Intel Atom E3845 Quad

Core, 4x USB, 2x COM, 1x VGA and 1x DisplayPort

CV

-119R-R10/P1001E

19" TFT SXGA 5:4 Panel PC with Resistive 5

-wire Touch, w/ Intel Atom E3845 Quad

Core, 4x USB, 2x COM, 1x VGA and 1x DisplayPort and 2x Universal bracket

CV

-119C-R10/P1001

19" TFT SXGA 5:4 Panel PC with Projected Capacitive Touch, w/ Intel Atom E3845
Quad Core, 4x USB, 2x COM, 1x VGA and 1x DisplayPort

CV

-119C-R10/P1001E

19" TFT SXGA 5:4 Panel PC with Projected Capacitive Touch, w/ Intel Atom E3845
Quad Core, 4x USB, 2x COM, 1x VGA and 1x DisplayPort and 2x Universal bracket

CV

-W121R-R10/P1001

21.5" TFT Full HD 16:9 Panel PC with Resistive 5

-wire Touch and Intel Atom E3845

Quad Core, 4x USB, 2x COM, 1x VGA, 1x DisplayPort

CV

-W121R-R10/P1001E

21.5" TFT Full HD 16:9 Panel PC with Resistive 5

-wire Touch and Intel Atom E3845

Quad Core, 4x USB, 2x COM, 1x VGA, 1x DisplayPort, 2x Universal bracket

CV

-W121C-R10/P1001

21.5" TFT Full HD 16:9 Panel PC with Projected Capacitive Touch and Intel Atom
E3845 Quad Core, 4x USB, 2x COM, 1x VGA, 1x DisplayPort

CV

-W121C-R10/P1001E

21.5" TFT Full HD 16:9 Panel PC with Projected Capacitive Touch and Intel Atom
E3845 Quad Core, 4x USB, 2x COM, 1x VGA, 1x DisplayPort, 2x Universal bracket

Product Introductions

Chapter 1

CV-100/P1000 Series

Industrial Panel PC

| User’s Manual

13

1.1 Overview

The CV-100/P1000 Series all-in-one panel PC offers LED backlight LCD. It features flat surface and
IP65 dust/waterproof front panel. In addition, designed with aluminum die-cast front frame with
rugged body structure that can be able to apply in industrial applications. The CV-100/P1000Series

supports Convertible Display System (CDS) technology which makes it more flexible in system

maintaining and upgrading. The CV-100/P1000 Series carries single touch function with resistive 5­wire touch screen. By incorporating with Intel® Atom™ E3845 processor and DDR3L memory, The
CV-100/P1000 Series offers extensive I/O including 4x USB, 2x RS232/422/485, 1x VGA, 1x
DisplayPort and 4 DI / 4DO.

The CV-100/P1000 Series supports 3G and WLAN via 2x GbE and 1x Mini-PCIe socket.
Furthermore, they are 3 types of storage devices including 2.5" SATA HDD, CFast and SIM card.
The accessible design of these storage devices allow quick data access and easy maintenance.

Supporting wide range power DC input from 9 ~ 48VDC, The CV-100/P1000 Series can be

deployed and powered for various industrial applications.

Chapter 1: Product Introductions

Front Rear

CV-100/P1000 Series

Industrial Panel PC

| User’s Manual

14

Chapter 1: Product Introductions

1.2.1 CV-108/P1000

Display

• LCD Size: 8.4" (4:3)

• Max. Resolution: 800 x 600

• Brightness (cd/m2): 400

• Contrast Ratio: 600 : 1

• LCD Color: 262K

• Pixel Pitch (mm): 0.213 (H) x 0.213 (V)

• Viewing Angle (H-V): 150 / 130

• Backlight MTBF: 30000 hrs (LED Backlight)

Touch

• Resistive 5-wire Touch for CV-108R/P1000 Only

Environment

• Operating Temperature: Ambient with Air Flow: -20°C to 70°C (with Industrial Grade Peripherals)

• Storage Temperature: -30°C to 80°C

• Relative humidity: 90% RH @ 60°C (Non-Condensing)

• IP Level: IP 65 Compliant Front Panel

Physical

• Dimension (WxHxD):
CV-108/P1001: 262 x 186.2 x 65 mm
CV-108/P1001E: 262 x 186.2 x 87.5 mm

• Weight:
CV-108/P1001: 2.96 kg
CV-108/P1001E: 3.16 kg

• Construction Front Panel: Die-cast Flat Surface

• Mounting: Panel / Wall / VESA Mounting

1.2 Hardware Specification

CV-108/P1000

CV-100/P1000 Series

Industrial Panel PC

| User’s Manual

15

Chapter 1: Product Introductions

Processor System

• Onboard Intel® Atom™ Processor E3845 Quad

Core, 1.91 GHz with AMI 64Mbit SPI BIOS.

Memory

• 1x 204-Pin SO-DIMM DDR3L 1066 / 1333MHz
(un-buffered and non-ECC), Max. up to 8GB

Ethernet

• 2 x Intel® i210-AT GbE LAN Port, Support

Wake-on-LAN and PXE

Storage

• 1x External 2.5" SATA HDD Bay

• 1x External CFast Socket

• 1x External SIM Card Socket

I/O Ports

• 1x VGA

• 1x DisplayPort

• 1x USB 3.0

• 3x USB 2.0

• 2x DB9 for COM1~2, Support RS232/422/485

with Auto Flow Control

• 1x Line-out

• 1x Mic-in

• 1x Power Switch

• 1x Reset Button

• 1x AT/ATX Switch

Expansion

• 1x Full-size Mini PCIe Socket for Wi-Fi / GSM /

Expansion Module

• 2x Universal I/O Bracket (CV-108/P1001E Only)

Other Features

• Watchdog Timer: Software Programmable
Supports 1~255 sec.

• Audio: AMP 2W + 2W (Internal Speaker)

• OSD Function: LCD On/Off, Brightness

Up/Down

Digital Input & Output

• 4x Digital Input (Source Type)

- Input Voltage (Dry Contact):
Logic 0: Close to GND
Logic 1: Open

- Input Voltage:

Logic 0: -3V(Min/ DI to COM+)

• 4x Digital Output

- Supply Voltage: 5~30VDC

- Sink Current: 580mA max. per channel

- DO Max: 30V

Power

• Support AT, ATX Mode

• 1x 3-pin Terminal Block Connector with

Power Input 9~48VDC

• 1x Optional AC/DC 12V/5A, 60W Power

Adapter

Operating System

• Windows® 10/8.1/7

• Linux® Kernel 3.x

Certification

• CE

• FCC Class A

CV-100/P1000 Series

Industrial Panel PC

| User’s Manual

16

Chapter 1: Product Introductions

Unit: mm

CV-108/P1001

Dimension

CV-100/P1000 Series

Industrial Panel PC

| User’s Manual

17

Chapter 1: Product Introductions

Unit: mm

CV-108/P1001E

Dimension

CV-100/P1000 Series

Industrial Panel PC

| User’s Manual

18

Chapter 1: Product Introductions

1.2.2 CV-110/P1000

Display

• LCD Size: 10.4" (4:3)

• Max. Resolution: 800 x 600

• Brightness (cd/m2): 400

• Contrast Ratio: 700 : 1

• LCD Color: 16.2M

• Pixel Pitch (mm): 0.264 (H) x 0.264 (V)

• Viewing Angle (H-V): 160 / 130

• Backlight MTBF: 70000 hrs (LED Backlight)

Touch

• Resistive 5-wire Touch for CV-110R/P1001
Only

• Projected CapacitiveTouch for CV­110C/P1001 Only

Environment

• Operating Temperature: Ambient with Air
Flow: -20°C to 70°C (with Industrial Grade
Peripherals)

• Storage Temperature: -30°C to 80°C

• Relative humidity: 90% RH @ 40°C (Non-

Condensing)

• IP Level: IP 65 Compliant Front Panel

Physical

• Dimension (WxHxD):

CV-110/P1001: 295 x 227.3 x 65 mm

CV-110/P1001E: 295 x 227.3 x 87.5 mm

• Weight:

CV-110/P1001: 3.58 kg
CV-110/P1001E: 3.78 kg

• Construction Front Panel: Die-cast Flat
Surface

• Mounting: Panel / Wall / VESA Mounting

Display

• LCD Size: 10.4" (4:3)

• Max. Resolution: 1024 x 768

• Brightness (cd/m2): 400

• Contrast Ratio: 1400 : 1

• LCD Color: 16.2M

• Pixel Pitch (mm): 0.2055 (H) x 0.2055 (V)

• Viewing Angle (H-V): 178 / 178

• Backlight MTBF: 50000 hrs (LED Backlight)

Touch

• Resistive 5-wire Touch for CV-110HR/P1001
Only

• Projected Capacitive Touch for CV­110HC/P1001 Only

Environment

• Operating Temperature: Ambient with Air
Flow: -20°C to 70°C (with Industrial Grade
Peripherals)

• Storage Temperature: -30°C to 80°C

• Relative humidity: 90% RH @ 40°C (Non-

Condensing)

• IP Level: IP 65 Compliant Front Panel

Physical

• Dimension (WxHxD):

CV-110H/P1001: 295 x 227.3 x 65 mm
CV-110H/P1001E: 295 x 227.3 x 87.5 mm

• Weight:

CV-110H/P1001: 3.58 kg
CV-110H/P1001E: 3.78 kg

• Construction Front Panel: Die-cast Flat
Surface

• Mounting: Panel / Wall / VESA Mounting

CV-110/P1000 CV-110H/P1000

CV-100/P1000 Series

Industrial Panel PC

| User’s Manual

19

Chapter 1: Product Introductions

Processor System

• Onboard Intel® Atom™ Processor E3845 Quad

Core, 1.91 GHz with AMI 64Mbit SPI BIOS.

Memory

• 1x 204-Pin SO-DIMM DDR3L 1066 / 1333MHz
(un-buffered and non-ECC), max. up to 8GB

Ethernet

• 2 x Intel® i210-AT GbE LAN Port, Support

Wake-on-LAN and PXE

Storage

• 1x External 2.5" SATA HDD Bay

• 1x External CFast Socket

• 1x External SIM Card Socket

I/O Ports

• 1x VGA

• 1x DisplayPort

• 1x USB 3.0

• 3x USB 2.0

• 2x DB9 for COM1~2, Support RS232/422/485

with Auto Flow Control

• 1x Line-out

• 1x Mic-in

• 1x Power Switch

• 1x Reset Button

• 1x AT/ATX Switch

Expansion

• 1x Full-size Mini PCIe Socket for Wi-Fi / GSM /

Expansion Module

• 2x Universal I/O Bracket (CV-110/P1001E & CV-

110H/P1001E Only)

Other Features

• Watchdog Timer: Software Programmable
Supports 1~255 sec.

• Audio: AMP 2W + 2W (Internal Speaker)

• OSD Function: LCD On/Off, Brightness

Up/Down

Digital Input & Output

• 4x Digital Input (Source Type)

- Input Voltage (Dry Contact):
Logic 0: Close to GND
Logic 1: Open

- Input Voltage:

Logic 0: -3V(Min/ DI to COM+)

• 4x Digital Output

- Supply Voltage: 5~30VDC

- Sink Current: 580mA max. per channel

- DO Max: 30V

Power

• Support AT, ATX Mode

• 1x 3-pin Terminal Block Connector with

Power Input 9~48VDC

• 1x Optional AC/DC 12V/5A, 60W Power

Adapter

Operating System

• Windows® 10/8.1/7

• Linux® Kernel 3.x

Certification

• CE

• FCC Class A

CV-100/P1000 Series

Industrial Panel PC

| User’s Manual

20

Chapter 1: Product Introductions

Unit: mm

CV-110/P1001
CV-110H/P1001

Dimension

CV-100/P1000 Series

Industrial Panel PC

| User’s Manual

Unit: mm

CV-110/P1001E
CV-110H/P1001E

21

Chapter 1: Product Introductions

Dimension

CV-100/P1000 Series

Industrial Panel PC

| User’s Manual

22

Chapter 1: Product Introductions

1.2.3 CV-112/P1000

Display

• LCD Size: 12.1" (4:3)

• Max. Resolution: 800 x 600

• Brightness (cd/m2): 450

• Contrast Ratio: 800 : 1

• LCD Color: 262K

• Pixel Pitch (mm): 0.3075 (H) x 0.3075 (V)

• Viewing Angle (H-V): 160 / 140

• Backlight MTBF: 50000 hrs (LED Backlight)

Touch

• Resistive 5-wire Touch for CV-112R/P1001
Only

• Projected Capacitive Touch for CV­112C/P1001 Only

Environment

• Operating Temperature: Ambient with Air
Flow: -20°C to 70°C (with Industrial Grade
Peripherals)

• Storage Temperature: -30°C to 80°C

• Relative humidity: 90% RH @ 40°C (Non-

Condensing)

• IP Level: IP 65 Compliant Front Panel

Physical

• Dimension (WxHxD):

CV-112/P1001: 345 x 265.3 x 65.5 mm

CV-112/P1001E: 345 x 265.3 x 88 mm

• Weight:

CV-112/P1001: 4.5 kg
CV-112/P1001E: 4.7 kg

• Construction Front Panel: Die-cast Flat
Surface

• Mounting: Panel / Wall / VESA Mounting

Display

• LCD Size: 12.1" (4:3)

• Max. Resolution: 1024 x 768

• Brightness (cd/m2): 500

• Contrast Ratio: 700 : 1

• LCD Color: 16.2M

• Pixel Pitch (mm): 0.24 (H) x 0.24 (V)

• Viewing Angle (H-V): 160 / 160

• Backlight MTBF: 30000 hrs (LED Backlight)

Touch

• Resistive 5-wire Touch for CV-112HR/P1001
Only

• Projected Capacitive Touch for CV­112HC/P1001 Only

Environment

• Operating Temperature: Ambient with Air
Flow: -20°C to 70°C (with Industrial Grade
Peripherals)

• Storage Temperature: -30°C to 80°C

• Relative humidity: 90% RH @ 40°C (Non-

Condensing)

• IP Level: IP 65 Compliant Front Panel

Physical

• Dimension (WxHxD):

CV-112H/P1001: 345 x 265.3 x 65.5 mm
CV-112H/P1001E: 345 x 265.3 x 88 mm

• Weight:

CV-112H/P1001: 4.5 kg
CV-112H/P1001E: 4.7 kg

• Construction Front Panel: Die-cast Flat
Surface

• Mounting: Panel / Wall / VESA Mounting

CV-112/P1000 CV-112H/P1000

CV-100/P1000 Series

Industrial Panel PC

| User’s Manual

23

Chapter 1: Product Introductions

Processor System

• Onboard Intel® Atom™ Processor E3845 Quad

Core, 1.91 GHz with AMI 64Mbit SPI BIOS.

Memory

• 1x 204-Pin SO-DIMM DDR3L 1066 / 1333MHz
(un-buffered and non-ECC), max. up to 8GB

Ethernet

• 2 x Intel® i210-AT GbE LAN Port, Support

Wake-on-LAN and PXE

Storage

• 1x External 2.5" SATA HDD Bay

• 1x External CFast Socket

• 1x External SIM Card Socket

I/O Ports

• 1x VGA

• 1x DisplayPort

• 1x USB 3.0

• 3x USB 2.0

• 2x DB9 for COM1~2, Support RS232/422/485

with Auto Flow Control

• 1x Line-out

• 1x Mic-in

• 1x Power Switch

• 1x Reset Button

• 1x AT/ATX Switch

Expansion

• 1x Full-size Mini PCIe Socket for Wi-Fi / GSM /

Expansion Module

• 2x Universal I/O Bracket (CV-112/P1001E & CV-

112H/P1001E Only)

Other Features

• Watchdog Timer: Software Programmable
Supports 1~255 sec.

• Audio: AMP 2W + 2W (Internal Speaker)

• OSD Function: LCD On/Off, Brightness

Up/Down

Digital Input & Output

• 4x Digital Input (Source Type)

- Input Voltage (Dry Contact):
Logic 0: Close to GND
Logic 1: Open

- Input Voltage:

Logic 0: -3V(Min/ DI to COM+)

• 4x Digital Output

- Supply Voltage: 5~30VDC

- Sink Current: 580mA max. per channel

- DO Max: 30V

Power

• Support AT, ATX Mode

• 1x 3-pin Terminal Block Connector with

Power Input 9~48VDC

• 1x Optional AC/DC 12V/5A, 60W Power

Adapter

Operating System

• Windows® 10/8.1/7

• Linux® Kernel 3.x

Certification

• CE

• FCC Class A

CV-100/P1000 Series

Industrial Panel PC

| User’s Manual

Unit: mm

CV-112/P1001
CV-112H/P1001

24

Chapter 1: Product Introductions

Dimension

CV-100/P1000 Series

Industrial Panel PC

| User’s Manual

Unit: mm

CV-112/P1001E
CV-112H/P1001E

25

Chapter 1: Product Introductions

Dimension

CV-100/P1000 Series

Industrial Panel PC

| User’s Manual

26

Chapter 1: Product Introductions

Display

• LCD Size: 15" (4:3)

• Max. Resolution: 1024 x 768

• Brightness (cd/m2): 350

• Contrast Ratio: 700 : 1

• LCD Color: 16.2M

• Pixel Pitch (mm): 0.297 (H) x 0.297 (V)

• Viewing Angle (H-V): 170 / 160

• Backlight MTBF: 50000 hrs (LED Backlight)

Touch

• Resistive 5-wire Touch for CV-115R/P1001 Only

• Projected CapacitiveTouch for CV-115C/P1001 Only

Environment

• Operating Temperature: Ambient with Air Flow: 0°C to 60°C (with Industrial Grade Peripherals)

• Storage Temperature: -20°C to 65°C

• Relative humidity: 80% RH @ 50°C (Non-Condensing)

• IP Level: IP 65 Compliant Front Panel

Physical

• Dimension (WxHxD):
CV-115/P1001: 408 x 312.4 x 68 mm
CV-115/P1001E: 408 x 312.4 x 90.5 mm

• Weight:
CV-115/P1001: 5.7 kg
CV-115/P1001E: 5.9 kg

• Construction Front Panel: Die-cast Flat Surface

• Mounting: Panel / Wall / VESA Mounting

1.2.4 CV-115/P1000

CV-115/P1000

CV-100/P1000 Series

Industrial Panel PC

| User’s Manual

27

Chapter 1: Product Introductions

Processor System

• Onboard Intel® Atom™ Processor E3845 Quad

Core, 1.91 GHz with AMI 64Mbit SPI BIOS.

Memory

• 1x 204-Pin SO-DIMM DDR3L 1066 / 1333MHz

(un-buffered and non-ECC), max. up to 8GB

Ethernet

• 2 x Intel® i210-AT GbE LAN Port, Support

Wake-on-LAN and PXE

Storage

• 1x External 2.5" SATA HDD Bay

• 1x External CFast Socket

• 1x External SIM Card Socket

I/O Ports

• 1x VGA

• 1x DisplayPort

• 1x USB 3.0

• 3x USB 2.0

• 2x DB9 for COM1~2, Support RS232/422/485

with Auto Flow Control

• 1x Line-out

• 1x Mic-in

• 1x Power Switch

• 1x Reset Button

• 1x AT/ATX Switch

Expansion

• 1x Full-size Mini PCIe Socket for Wi-Fi / GSM /

Expansion Module

• 2x Universal I/O Bracket (CV-115/P1001E Only)

Other Features

• Watchdog Timer: Software Programmable
Supports 1~255 sec.

• Audio: AMP 2W + 2W (Internal Speaker)

• OSD Function: LCD On/Off, Brightness

Up/Down

Digital Input & Output

• 4x Digital Input (Source Type)

- Input Voltage (Dry Contact):
Logic 0: Close to GND
Logic 1: Open

- Input Voltage:

Logic 0: -3V(Min/ DI to COM+)

• 4x Digital Output

- Supply Voltage: 5~30VDC

- Sink Current: 580mA max. per channel

- DO Max: 30V

Power

• Support AT, ATX Mode

• 1x 3-pin Terminal Block Connector with

Power Input 9~48VDC

• 1x Optional AC/DC 12V/5A, 60W Power
Adapter

Operating System

• Windows® 10/8.1/7

• Linux® Kernel 3.x

Certification

• CE

• FCC Class A

CV-100/P1000 Series

Industrial Panel PC

| User’s Manual

Unit: mm

CV-115/P1001

28

Chapter 1: Product Introductions

Dimension

CV-100/P1000 Series

Industrial Panel PC

| User’s Manual

Unit: mm

CV-115/P1001E

29

Chapter 1: Product Introductions

Dimension

CV-100/P1000 Series

Industrial Panel PC

| User’s Manual

30

Chapter 1: Product Introductions

Display

• LCD Size: 15.6" (16:9)

• Max. Resolution: 1366 x 768

• Brightness (cd/m2): 400

• Contrast Ratio: 500 : 1

• LCD Color: 16.2M

• Pixel Pitch (mm): 0.252 (H) x 0.252 (V)

• Viewing Angle (H-V): 170 / 160

• Backlight MTBF: 50000 hrs (LED Backlight)

Touch

• Resistive 5-wire Touch for CV-W115R/P1001 Only

• Projected CapacitiveTouch for CV-W115C/P1001 Only

Environment

• Operating Temperature: Ambient with Air Flow: 0°C to 60°C (with Industrial Grade Peripherals)

• Storage Temperature: -20°C to 60°C

• Relative humidity: 80% RH @ 50°C (Non-Condensing)

• IP Level: IP 65 Compliant Front Panel

Physical

• Dimension (WxHxD):
CV-W115/P1001: 420 x 254 x 75 mm
CV-W115/P1001E: 420 x 254 x 97.5 mm

• Weight:
CV-W115/P1001: 5.59 kg

CV-W115/P1001E: 5.79 kg

• Construction Front Panel: Die-cast Flat Surface

• Mounting: Panel / Wall / VESA Mounting

1.2.4 CV-W115/P1000

CV-W115/P1000

CV-100/P1000 Series

Industrial Panel PC

| User’s Manual

31

Chapter 1: Product Introductions

Processor System

• Onboard Intel® Atom™ Processor E3845 Quad

Core, 1.91 GHz with AMI 64Mbit SPI BIOS.

Memory

• 1x 204-Pin SO-DIMM DDR3L 1066 / 1333MHz

(un-buffered and non-ECC), max. up to 8GB

Ethernet

• 2 x Intel® i210-AT GbE LAN Port, Support

Wake-on-LAN and PXE

Storage

• 1x External 2.5" SATA HDD Bay

• 1x External CFast Socket

• 1x External SIM Card Socket

I/O Ports

• 1x VGA

• 1x DisplayPort

• 1x USB 3.0

• 3x USB 2.0

• 2x DB9 for COM1~2, Support RS232/422/485

with Auto Flow Control

• 1x Line-out

• 1x Mic-in

• 1x Power Switch

• 1x Reset Button

• 1x AT/ATX Switch

Expansion

• 1x Full-size Mini PCIe Socket for Wi-Fi / GSM /

Expansion Module

• 2x Universal I/O Bracket (CV-W115/P1001E

Only)

Other Features

• Watchdog Timer: Software Programmable
Supports 1~255 sec.

• Audio: AMP 2W + 2W (Internal Speaker)

• OSD Function: LCD On/Off, Brightness

Up/Down

Digital Input & Output

• 4x Digital Input (Source Type)

- Input Voltage (Dry Contact):
Logic 0: Close to GND
Logic 1: Open

- Input Voltage:

Logic 0: -3V(Min/ DI to COM+)

• 4x Digital Output

- Supply Voltage: 5~30VDC

- Sink Current: 580mA max. per channel

- DO Max: 30V

Power

• Support AT, ATX Mode

• 1x 3-pin Terminal Block Connector with

Power Input 9~48VDC

• 1x Optional AC/DC 12V/5A, 60W Power
Adapter

Operating System

• Windows® 10/8.1/7

• Linux® Kernel 3.x

Certification

• CE

• FCC Class A

CV-100/P1000 Series

Industrial Panel PC

| User’s Manual

Unit: mm

CV-W115/P1001

32

Chapter 1: Product Introductions

Dimension

CV-100/P1000 Series

Industrial Panel PC

| User’s Manual

Unit: mm

CV-W115/P1001E

33

Chapter 1: Product Introductions

Dimension

CV-100/P1000 Series

Industrial Panel PC

| User’s Manual

34

Chapter 1: Product Introductions

Display

• LCD Size: 17" (5:4)

• Max. Resolution: 1280 x 1024

• Brightness (cd/m2): 350

• Contrast Ratio: 800 : 1

• LCD Color: 16.7M

• Pixel Pitch (mm): 0.264 (H) x 0.264 (V)

• Viewing Angle (H-V): 160 / 140

• Backlight MTBF: 50000 hrs (LED Backlight)

Touch

• Resistive 5-wire Touch for CV-117R/P1001 Only

• Projected CapacitiveTouch for CV-117C/P1001 Only

Environment

• Operating Temperature: Ambient with Air Flow: -20°C to 70°C (with Industrial Grade Peripherals)

• Storage Temperature: -30°C to 80°C

• Relative humidity: 80% RH @ 50°C (Non-Condensing)

• IP Level: IP 65 Compliant Front Panel

Physical

• Dimension (WxHxD):
CV-117/P1001: 450 x 350 x 72 mm
CV-117/P1001E: 450 x 350 x 94.5 mm

• Weight:
CV-117/P1001: 6.98 kg
CV-117/P1001E: 7.18 kg

• Construction Front Panel: Die-cast Flat Surface

• Mounting: Panel / Wall / VESA Mounting

1.2.5 CV-117/P1000

CV-117/P1000

CV-100/P1000 Series

Industrial Panel PC

| User’s Manual

35

Chapter 1: Product Introductions

Processor System

• Onboard Intel® Atom™ Processor E3845 Quad

Core, 1.91 GHz with AMI 64Mbit SPI BIOS.

Memory

• 1x 204-Pin SO-DIMM DDR3L 1066 / 1333MHz

(un-buffered and non-ECC), max. up to 8GB

Ethernet

• 2 x Intel® i210-AT GbE LAN Port, Support

Wake-on-LAN and PXE

Storage

• 1x External 2.5" SATA HDD Bay

• 1x External CFast Socket

• 1x External SIM Card Socket

I/O Ports

• 1x VGA

• 1x DisplayPort

• 1x USB 3.0

• 3x USB 2.0

• 2x DB9 for COM1~2, Support RS232/422/485

with Auto Flow Control

• 1x Line-out

• 1x Mic-in

• 1x Power Switch

• 1x Reset Button

• 1x AT/ATX Switch

Expansion

• 1x Full-size Mini PCIe Socket for Wi-Fi / GSM /

Expansion Module

• 2x Universal I/O Bracket (CV-117/P1001E Only)

Other Features

• Watchdog Timer: Software Programmable
Supports 1~255 sec.

• Audio: AMP 2W + 2W (Internal Speaker)

• OSD Function: LCD On/Off, Brightness

Up/Down

Digital Input & Output

• 4x Digital Input (Source Type)

- Input Voltage (Dry Contact):
Logic 0: Close to GND
Logic 1: Open

- Input Voltage:

Logic 0: -3V(Min/ DI to COM+)

• 4x Digital Output

- Supply Voltage: 5~30VDC

- Sink Current: 580mA max. per channel

- DO Max: 30V

Power

• Support AT, ATX Mode

• 1x 3-pin Terminal Block Connector with

Power Input 9~48VDC

• 1x Optional AC/DC 12V/5A, 60W Power
Adapter

Operating System

• Windows® 10/8.1/7

• Linux® Kernel 3.x

Certification

• CE

• FCC Class A

CV-100/P1000 Series

Industrial Panel PC

| User’s Manual

Unit: mm

CV-117/P1001

36

Chapter 1: Product Introductions

Dimension

CV-100/P1000 Series

Industrial Panel PC

| User’s Manual

Unit: mm

CV-117/P1001E

37

Chapter 1: Product Introductions

Dimension

CV-100/P1000 Series

Industrial Panel PC

| User’s Manual

38

Chapter 1: Product Introductions

Display

• LCD Size: 19" (5:4)

• Max. Resolution: 1280 x 1024

• Brightness (cd/m2): 350

• Contrast Ratio: 1000 : 1

• LCD Color: 16.7M

• Pixel Pitch (mm): 0.294 (H) x 0.294 (V)

• Viewing Angle (H-V): 170 / 160

• Backlight MTBF: 50000 hrs (LED Backlight)

Touch

• Resistive 5-wire Touch for CV-119R/P1001 Only

• Projected CapacitiveTouch for CV-119C/P1001

Only

Environment

• Operating Temperature: Ambient with Air Flow:
0°C to 50°C (with Industrial Grade Peripherals)

• Storage Temperature: -20°C to 60°C

• Relative humidity: 80% RH @ 50°C (Non-

Condensing)

• IP Level: IP 65 Compliant Front Panel

Physical

• Dimension (WxHxD):

CV-119/P1001: 510 x 389.3 x 72 mm
CV-119/P1001E: 510 x 389.3 x 94.5 mm

• Weight:

CV-119/P1001: 8.3 kg
CV-119/P1001E: 8.5 kg

• Construction Front Panel: Die-cast Flat Surface

• Mounting: Panel / Wall / VESA Mounting

1.2.6 CV-119/P1000

CV-119/P1000

CV-100/P1000 Series

Industrial Panel PC

| User’s Manual

39

Chapter 1: Product Introductions

Processor System

• Onboard Intel® Atom™ Processor E3845 Quad

Core, 1.91 GHz with AMI 64Mbit SPI BIOS.

Memory

• 1x 204-Pin SO-DIMM DDR3L 1066 / 1333MHz

(un-buffered and non-ECC), max. up to 8GB

Ethernet

• 2 x Intel® i210-AT GbE LAN Port, Support

Wake-on-LAN and PXE

Storage

• 1x External 2.5" SATA HDD Bay

• 1x External CFast Socket

• 1x External SIM Card Socket

I/O Ports

• 1x VGA

• 1x DisplayPort

• 1x USB 3.0

• 3x USB 2.0

• 2x DB9 for COM1~2, Support RS232/422/485

with Auto Flow Control

• 1x Line-out

• 1x Mic-in

• 1x Power Switch

• 1x Reset Button

• 1x AT/ATX Switch

Expansion

• 1x Full-size Mini PCIe Socket for Wi-Fi / GSM /

Expansion Module

• 2x Universal I/O Bracket (CV-119/P1001E Only)

Other Features

• Watchdog Timer: Software Programmable
Supports 1~255 sec.

• Audio: AMP 2W + 2W (Internal Speaker)

• OSD Function: LCD On/Off, Brightness

Up/Down

Digital Input & Output

• 4x Digital Input (Source Type)

- Input Voltage (Dry Contact):
Logic 0: Close to GND
Logic 1: Open

- Input Voltage:

Logic 0: -3V(Min/ DI to COM+)

• 4x Digital Output

- Supply Voltage: 5~30VDC

- Sink Current: 580mA max. per channel

- DO Max: 30V

Power

• Support AT, ATX Mode

• 1x 3-pin Terminal Block Connector with

Power Input 9~48VDC

• 1x Optional AC/DC 12V/5A, 60W Power

Adapter

Operating System

• Windows® 10/8.1/7

• Linux® Kernel 3.x

Certification

• CE

• FCC Class A

CV-100/P1000 Series

Industrial Panel PC

| User’s Manual

Unit: mm

CV-119/P1001

40

Chapter 1: Product Introductions

Dimension

CV-100/P1000 Series

Industrial Panel PC

| User’s Manual

Unit: mm

CV-119/P1001E

41

Chapter 1: Product Introductions

Dimension

CV-100/P1000 Series

Industrial Panel PC

| User’s Manual

42

Chapter 1: Product Introductions

Display

• LCD Size: 21.5" (16:9)

• Max. Resolution: 1920 x 1080

• Brightness (cd/m2): 300

• Contrast Ratio: 5000 : 1

• LCD Color: 16.7M

• Pixel Pitch (mm): 0.24825 (H) x 0.24825 (V)

• Viewing Angle (H-V): 178 / 178

• Backlight MTBF: 50000 hrs (LED Backlight)

Touch

• Resistive 5-wire Touch for CV-W121R/P1001 Only

• Projected CapacitiveTouch for CV-W121C/P1001 Only

Environment

• Operating Temperature: Ambient with Air Flow: 0°C to 60°C (with Industrial Grade Peripherals)

• Storage Temperature: -20°C to 60°C

• Relative humidity: 80% RH @ 50°C (Non-Condensing)

• IP Level: IP 65 Compliant Front Panel

Physical

• Dimension (WxHxD):
CV-W121/P1001: 550 x 330.5 x 72 mm
CV-W121/P1001E: 550 x 330.5 x 94.5 mm

• Weight:
CV-W121/P1001: 6.9 kg
CV-W121/P1001E: 7.1 kg

• Construction Front Panel: Die-cast Flat Surface

• Mounting: Panel / Wall / VESA Mounting

1.2.7 CV-W121/P1000

CV-W121/P1000

CV-100/P1000 Series

Industrial Panel PC

| User’s Manual

43

Chapter 1: Product Introductions

Processor System

• Onboard Intel® Atom™ Processor E3845 Quad

Core, 1.91 GHz with AMI 64Mbit SPI BIOS.

Memory

• 1x 204-Pin SO-DIMM DDR3L 1066 / 1333MHz

(un-buffered and non-ECC), max. up to 8GB

Ethernet

• 2 x Intel® i210-AT GbE LAN Port, Support

Wake-on-LAN and PXE

Storage

• 1x External 2.5" SATA HDD Bay

• 1x External CFast Socket

• 1x External SIM Card Socket

I/O Ports

• 1x VGA

• 1x DisplayPort

• 1x USB 3.0

• 3x USB 2.0

• 2x DB9 for COM1~2, Support RS232/422/485

with Auto Flow Control

• 1x Line-out

• 1x Mic-in

• 1x Power Switch

• 1x Reset Button

• 1x AT/ATX Switch

Expansion

• 1x Full-size Mini PCIe Socket for Wi-Fi / GSM /

Expansion Module

• 2x Universal I/O Bracket (CV-W121/P1001E

Only)

Other Features

• Watchdog Timer: Software Programmable
Supports 1~255 sec.

• Audio: AMP 2W + 2W (Internal Speaker)

• OSD Function: LCD On/Off, Brightness

Up/Down

Digital Input & Output

• 4x Digital Input (Source Type)

- Input Voltage (Dry Contact):
Logic 0: Close to GND
Logic 1: Open

- Input Voltage:

Logic 0: -3V(Min/ DI to COM+)

• 4x Digital Output

- Supply Voltage: 5~30VDC

- Sink Current: 580mA max. per channel

- DO Max: 30V

Power

• Support AT, ATX Mode

• 1x 3-pin Terminal Block Connector with

Power Input 9~48VDC

• 1x Optional AC/DC 12V/5A, 60W Power

Adapter

Operating System

• Windows® 10/8.1/7

• Linux® Kernel 3.x

Certification

• CE

• FCC Class A

CV-100/P1000 Series

Industrial Panel PC

| User’s Manual

Unit: mm

CV-W121/P1001

44

Chapter 1: Product Introductions

Dimension

CV-100/P1000 Series

Industrial Panel PC

| User’s Manual

Unit: mm

CV-W121/P1001E

45

Chapter 1: Product Introductions

Dimension

CV-100/P1000 Series

Industrial Panel PC

| User’s Manual

46

Chapter 1: Product Introductions

1.2 System I/O

1.2.1 Front

ATX Power on/off switch

Press to power-on or power-off the system

Antenna hole

Used to connect an antenna for optional
Mini-PCIe WiFi module

CFast and SIM card Slot

Used to insert a CFast card and SIM card

External HDD Bay

Used to insert a 2.5” HDD or SSD

CV-100/P1001

CV-100/P1001E

CV-100/P1000 Series

Industrial Panel PC

| User’s Manual

47

Chapter 1: Product Introductions

1.2.2 Rear

DC IN

Used to plug a DC power input with terminal

block

Reset Button

Used to reset the system

Mic-in

Used to connect a microphone

Line-out

Used to connect a external speaker

USB 2.0 port

Used to connect USB 2.0/1.1 device

LAN port

Used to connect the system to a local area
network

VGA

Used to connect an analog VGA monitor

COM port

COM 1 supports RS232/422/485 serial

device

CV-100/P1001

CV-100/P1001E

CV-100/P1000 Series

Industrial Panel PC

| User’s Manual

48

Chapter 1: Product Introductions

1.2.3 Side (Left)

USB 3.0 port

Used to connect USB 3.0/2.0/1.1 device

USB 2.0 port

Used to connect USB 2.0/1.1 device

Digital I/O Terminal Block

The Digital I/O terminal block supports 4
digital input and 4 digital output

AT/ATX mode select switch

Used to select AT or ATX power mode

CV-100/P1001

CV-100/P1001E

CV-100/P1000 Series

Industrial Panel PC

| User’s Manual

49

Chapter 1: Product Introductions

1.2.4 Side (Right)

COM port

COM 2 supports RS232/422/485 serial
device

DisplayPort

Used to connect a Display Port devices

Power LED

Indicates the power status of the system

HDD LED

Indicates the status of the hard drive

OSD Function

LCD On/Off

Press to turn-on or turn-off the display

Increase Brightness

Press to increase brightness of the screen

Decrease Brightness

Press to decrease brightness of the screen

CV-100/P1001

CV-100/P1001E

CV-100/P1000 Series

Industrial Panel PC

| User’s Manual

50

Chapter 1: Product Introductions

1.2.5 Top

VESA Mounting Hole

These are mounting holes for VESA mount (75x75mm and 100x100mm)

Jumpers and Connectors

Chapter 2

CV-100/P1000 Series

Industrial Panel PC

| User’s Manual

52

2.1 Jumpers Settings

When setting the jumpers, ensure that the jumper caps are placed on the correct pins. When
the jumper cap is placed on both pins, the jumper is short. If you remove the jumper cap, or
place the jumper cap on just one pin, the jumper is open. Refer to below for examples of the 2­pin and 3-pin jumpers when they are short (on) and open (off).

Chapter 2: Jumpers and Connectors

1

2

Open

1 2

Short

Two-Pin Jumpers

1

2 3

Pins 1 and 2 are short

1

2

3

All pins are open

1

2 3

Pins 2 and 3 are short

Three-Pin Jumpers

2.2 Locations of the Jumpers and Connectors

2.2.1 Top View

CV-100/P1000 Series

Industrial Panel PC

| User’s Manual

53

Chapter 2: Jumpers and Connectors

2.2.2 Bottom View

CV-100/P1000 Series

Industrial Panel PC

| User’s Manual

54

Chapter 2: Jumpers and Connectors

2.3 Connector / Jumper / Switch Definitions

Connector Location Definition

AT_ATX

1

AT

/ ATX Power Mode Switch

BL_PWR

1

Backlight

Power on / off switching

BL_UP

1

Backlight

Increase

BL_DN

1

Backlight

Decrease

CFAST

1

CFast

Connector

CLR_CMOS

1

Clear

BIOS Switch

COM

1_1, COM2_1

RS

232 / RS422 / RS485 Connector

COM

12_SEL1

COM

1 / COM2 with Power Select

DC_IN

1

3

-pin DC 9~48V Power Input Connector

DIO

1

4

DI / 4DO Connector

DP1DisplayPort

Connector

LAN

1, LAN2

LAN

Port

LED

1

Power

/ HDDAccess LED Status

LINE_OUT

1

Line

-out Jack

MIC

1

Mic

-in Jack

MINIPCIE

1

Mini

PCI-Express Socket

POWER

1

Power

Connector

PWR_SW

1

Power

Switch Connector

RESET

1

Reset

Switch

SATA

1

SATA

with Power Connector

SIM

1

SIM

Card Socket

SPK_L1,

SPK_R1

Internal

Speaker Connector

USB1_2_1

, USB2_1

USB 2.0 Port

USB3_1

USB 3.0 Port

VGA1

VGA Connector

CV-100/P1000 Series

Industrial Panel PC

| User’s Manual

55

Switch Definition

1-2 (Left)

ATX Power Mode

（Default）

2-3 (Right)

AT Power Mode

2.4 Switch Definitions

AT_ATX1: AT / ATX Power Mode Switch

CLR_CMOS1: Clear CMOS Switch

Switch Definition

Off Normal Status (Default)

ON Clear CMOS

BL_PWR1: Backlight Power on / off

Switch Definition

Push

Backlight Power on / off switching

BL_UP1: Backlight Increase

Switch Definition

Push

Backlight

Increase

BL_DN1: Backlight Decrease

Switch Definition

Push

Backlight

Decrease

RESET1:

Switch Definition

Push

Reset System

Chapter 2: Jumpers and Connectors

CV-100/P1000 Series

Industrial Panel PC

| User’s Manual

56

2.5 Jumper Definitions

COM12_SEL1: COM1 / COM2 with Power Select

Connector Type: 2X5 10-pin Header, 2.0mm pitch

COM1 COM2

Pin Definition Pin Definition

1-3 On +5V 2-4 On +5V

3-5 On +12V 4-6 On +12V
7-9 On

(Default)

Reserved

8-10 On

(Default)

Reserved

2.6 Connector Definitions

CFAST1: CFast Connector

Pin Definition Pin Definition Pin Definition

S1 GND PC1 NC

PC10

NC

S2 SATA_TX2+ PC2 GND

PC11

NC

S3 SATA_TX2- PC3 NC

PC12

NC

S4 GND PC4 NC

PC13

+3.3V

S5 SATA_RX2- PC5 NC

PC14

+3.3V

S6 SATA_RX2+ PC6 NC

PC15

GND

S7 GND PC7 GND

PC16

GND

PC8 NC

PC17

NC

PC9 NC

Chapter 2: Jumpers and Connectors

CV-100/P1000 Series

Industrial Panel PC

| User’s Manual

57

COM1_1: RS232 / RS422 / RS485 Connector

Connector Type: 9-pin D-Sub

Pin

RS232

Definition

RS422 / 485

Full Duplex

Definition

RS485

Half Duplex

Definition

1 DCD1 TX1- DATA1­2 RxD1 TX1+ DATA1+

3 TxD1 RX1+

4 DTR1 RX1­5 GND
6 DSR1
7 RTS1
8 CTS1
9 RI1

COM2_1: RS232 / RS422 / RS485 Connector

Connector Type: 9-pin D-Sub

Pin

RS232

Definition

RS422 / 485

Full Duplex

Definition

RS485 Half Duplex

Definition

1 DCD2 TX2- DATA2­2 RxD2 TX2+ DATA2+
3 TxD2 RX2+
4 DTR2 RX2­5 GND
6 DSR2
7 RTS2
8 CTS2
9 RI2

Chapter 2: Jumpers and Connectors

Power over Serial PIN Definitions

Pin RS232

RS422/

485

RS485

5 GND GND GND

9 0/5/12V 0/5/12V 0/5/12V

Power over Serial PIN Definitions

Pin RS232

RS422/

485

RS485

5 GND GND GND

9 0/5/12V 0/5/12V 0/5/12V

CV-100/P1000 Series

Industrial Panel PC

| User’s Manual

58

DC_IN1: DC Power Input Connector (+9~48V)

Connector Type: Terminal Block 1X3 3-pin, 5.0mm pitch

Pin Definition

1

+

9~48VIN

2

Chassis GND

3

GND

DIO1: Digital Input / Output Connector

Connector Type: Terminal Block 1X10 10-pin, 3.5mm pitch

Pin Definition Pin Definition

1 DC INPUT 6 DO1
2 DI1 7 DO2
3 DI2 8 DO3

4 DI3 9 DO4

5 DI4 10 GND

Chapter 2: Jumpers and Connectors

CV-100/P1000 Series

Industrial Panel PC

| User’s Manual

59

DP1: DisplayPort Connector

Pin Definition Pin Definition

1 DP_LANE0_P 11 GND
2 GND 12 DP_LANE3_N
3 DP_LANE0_N 13 GND
4 DP_LANE1_P 14 GND

5 GND 15 DP_AUX_P

6 DP_LANE1_N 16 GND
7 DP_LANE2_P 17 DP_AUX_N
8 GND 18 DP_HPD
9 DP_LANE2_N 19 GND

10 DP_LANE3_P 20 DP_PWR

Chapter 2: Jumpers and Connectors

CV-100/P1000 Series

Industrial Panel PC

| User’s Manual

60

LAN1: RJ45 with LEDs Port

Pin Definition Pin Definition

1 LAN1_MDI0P 5 LAN1_MDI2N
2 LAN1_MDI0N 6 LAN1_MDI1N
3 LAN1_MDI1P 7 LAN1_MDI3P
4 LAN1_MDI2P 8 LAN1_MDI3N

Act LED Status Definition Link LED Status Definition

Blinking Yellow Data Activity Steady Green 1Gbps Network Link

Off No Activity Steady Orange 100Mbps Network Link

Off 10Mbps Network Link

LAN2: RJ45 with LEDs Port

Pin Definition Pin Definition

1 LAN2_MDI0P 5 LAN2_MDI2N
2 LAN2_MDI0N 6 LAN2_MDI1N
3 LAN2_MDI1P 7 LAN2_MDI3P
4 LAN2_MDI2P 8 LAN2_MDI3N

Act LED Status Definition Link LED Status Definition

Blinking Yellow Data Activity Steady Green 1Gbps Network Link

Off No Activity Steady Orange 100Mbps Network Link

Off 10Mbps Network Link

LED1: Power / HDD Access LED Status

Pin Definition

1 HDD LED+
2 HDD LED­3 POWER LED+
4 POWER LED-

LED Status LED Color

HDD Yellow

POWER Green

Chapter 2: Jumpers and Connectors

CV-100/P1000 Series

Industrial Panel PC

| User’s Manual

61

LINE_OUT1: Line-out Jack (Green)

Connector Type: 5-pin Phone Jack

Pin Definition

1 GND
2 OUT_R
3 NC

4 GND

5 OUT_L

MIC1: Microphone Jack (Pink)

Connector Type: 5-pin Phone Jack

Pin Definition

1 GND
2 MIC_R
3 NC

4 GND

5 MIC_L

MINIPCIE1: Mini PCI-Express Socket

Pin

Definition

Pin

Definition

Pin

Definition

1 WAKE# 19 NC 37 GND
2 +3.3V 20 +3.3V 38 USB2_3P
3 NC 21 GND 39 +3.3V
4 GND 22 MINIPCIE RST# 40 GND

5 NC 23 MINIPCIE_RXN 41 +3.3V

6 +1.5V 24 +3.3V 42 NC
7 CLKREQ# 25 MINIPCIE_RXP 43 GND
8 UIM_PWR 26 GND 44 NC
9 GND 27 GND 45 NC

10 UIM_DATA 28 +1.5V 46 NC
11 MINIPCIE_CLKN 29 GND 47 NC

12 UIM_CLK 30 SMB_CLK 48 +1.5V
13 MINIPCIE_CLKP 31 MINIPCIE_TXN 49 NC
14 UIM_RESET 32 SMB_DATA 50 GND
15 GND 33 MINIPCIE_TXP 51 NC
16 UIM_VPP 34 GND 52 +3.3V
17 NC 35 GND
18 GND 36 USB2_3N

Chapter 2: Jumpers and Connectors

CV-100/P1000 Series

Industrial Panel PC

| User’s Manual

62

POWER1: Power Connector

Connector Type: 1X4-pin Wafer, 2.0mm pitch

Pin Definition

1 +5V
2 GND
3 GND
4 +12V

PWR_SW1：Power Switch Connector

Pin Definition

1 Power switch
2 GND

SATA1: SATA with Power Connector

Pin Definition Pin Definition

1 GND 12 GND

2 SATA_TX1+ 13 GND
3 SATA_TX1- 14 +5V
4 GND 15 +5V
5 SATA_RX1- 16 +5V
6 SATA_RX1+ 17 GND
7 GND 18 GND
8 +3.3V 19 GND

9 +3.3V 20 +12V
10 +3.3V 21 +12V
11 GND 22 +12V

SIM1：SIM Card Socket

Pin Definition

C1 UIM_PWR
C2 UIM_RESET
C3 UIM_CLK
C5 GND

C6 UIM_VPP

C7 UIM_DATA
CD NC

COM GND

Chapter 2: Jumpers and Connectors

CV-100/P1000 Series

Industrial Panel PC

| User’s Manual

63

SPK_L1: Left Internal Speaker Connector

Pin Definition

1 OUT_L
2 GND

SPK_R1: Right Internal Speaker Connector

Pin Definition

1 OUT_R
2 GND

USB1_2_1：USB2.0 Connector, Type A

Pin Definition Pin Definition

1 +5V 5 +5V
2 USB_DATA0- 6 USB_DATA_1­3 USB_DATA0+ 7 USB_DATA_1+
4 GND 8 GND

USB2_1: USB2.0 Connector, Type A

Pin Definition

1 +5V
2 USB2_DATA1­3 USB2_DATA1+
4 GND

USB3_1: USB 3.0 Connector, Type A

Pin Definition Pin Definition

1 +5V 6 USB3_RX0+
2 USB2_D0- 7 GND
3 USB2_D0+ 8 USB3_TX0­4 GND 9 USB3_TX0+
5 USB3_RX0-

Chapter 2: Jumpers and Connectors

System Setup

Chapter 3

CV-100/P1000 Series

Industrial Panel PC

| User’s Manual

65

Chapter 3: System Setup

3.1 Removing the Top Cover

In order to prevent electric shock or system damage, before removing
the chassis cover, must turn off power and disconnect the unit from
power source.

WARNING

1. Loosen the 8 screws of front and rear panel, then place them aside .

2. Remove the cover from the chassis.

3. Place the top cover gently.

CV-100/P1000 Series

Industrial Panel PC

| User’s Manual

66

Chapter 3: System Setup

3.2 Installing a Half Size Mini PCIe Card

1. Locate the Mini PCIe socket.

2. Use two screws provided on bracket to fasten the module and bracket together.

3. Tilt the Mini PCIe module at 45 degree angle and insert it to the slot until the gold-pated
connector of module contacted firmly with the slot.

45

°

CV-100/P1000 Series

Industrial Panel PC

| User’s Manual

67

Chapter 3: System Setup

4. Press the module down and use the two screws to fix the module.

3.3 Installing a Full Size Mini PCIe Card

1. Locate the Mini PCIe socket.

2. Tilt the Mini PCIe module at 45 degree angle and insert it to the slot until the gold-pated

connector of module contacted firmly with the slot.

45°

CV-100/P1000 Series

Industrial Panel PC

| User’s Manual

68

Chapter 3: System Setup

3. Press the module down and use the two screws to fix the module.

3.4 Installing Antennas

1. Remove the antenna hole covers at front panel.

2. Have antenna jack penetrate through the hole.

CV-100/P1000 Series

Industrial Panel PC

| User’s Manual

69

Chapter 3: System Setup

3. Put on the washer and fasten the nut with antenna jack.

4. Assemble the antenna and antenna jack together.

5. Attach the RF connector at the another end of the cable onto the module.

CV-100/P1000 Series

Industrial Panel PC

| User’s Manual

70

Chapter 3: System Setup

3.5 Installing a SO-DIMM

1. Locate SO-DIMM socket.

2. Tilt the SODIMM module at a 45 degree angle and insert it to SODIMM socket until the
gold-pated connector of module contacted firmly with the socket.

45°

2. Tilt the SODIMM module at a 45 degree angle and insert it to SODIMM socket until the
gold-pated connector of module contacted firmly with the socket.

CV-100/P1000 Series

Industrial Panel PC

| User’s Manual

71

Chapter 3: System Setup

3.6 Installing the Top Cover

1. Put on the cover.

2. Fasten the 8 screws to fix the cover.

CV-100/P1000 Series

Industrial Panel PC

| User’s Manual

72

Chapter 3: System Setup

3.7 Installing a SATA Hard Drive

1. Locate the removable HDD bay and loosen the 2 screws.

2. Pull out the HDD bracket.

3. Make the PCB side of the HDD face up, place the HDD bracket on it. Ensure the direction
of bracket is correct and use 4 provided screws to assemble HDD and HDD bracket
together.

CV-100/P1000 Series

Industrial Panel PC

| User’s Manual

73

Chapter 3: System Setup

4. Align the HDD bracket with the entrance of HDD bay. And insert the HDD bracket until the
connector of HDD contact the SATA connector firmly.

3.8 Installing a SIM Card

1. SIM card slot is at the front panel of the system.

2. Remove the mounting cover by unscrewing the two screws.

3. Insert the SIM card.

CV-100/P1000 Series

Industrial Panel PC

| User’s Manual

74

Chapter 3: System Setup

3.9 Installing a CFast Card

1. Locate the CFast card slot.

2. Remove the mounting cover by unscrewing the two screws.

3. Insert the CFast card.

CV-100/P1000 Series

Industrial Panel PC

| User’s Manual

75

Chapter 3: System Setup

3.10 Connecting with CV Display Module

1. Locate the module connector slot.

2. Turn over the unit to have the bottom side face up, loosen the 2 screws of the module
connector bracket.

The photos shows the male connector (on display module) and female connector (on PC
module)

CV-100/P1000 Series

Industrial Panel PC

| User’s Manual

76

Chapter 3: System Setup

3. Connect the modules.

4. Fasten the 6 screws onto the display module through the holes of the PC module.

BIOS Setup

Chapter 4

CV-100/P1000 Series

Industrial Panel PC

| User’s Manual

78

Chapter 4: BIOS Setup

4.1 BIOS Introduction

The BIOS (Basic Input/Output System) is a program located on a Flash Memory on the
motherboard. When you start the computer, the BIOS program will gain control. The BIOS first
operates an auto-diagnostic test called POST (power on self test) for all the necessary
hardware, it detects the entire hardware device and configures the parameters of the hardware
synchronization.

BIOS Setup

Power on the computer and by pressing <Del> immediately allows you to enter Setup. If the
message disappears before your respond and you still wish to enter Setup, restart the system
to try again by turning it OFF then ON or pressing <Ctrl>, <Alt> and <Delete> keys.

Control Keys

<

←> <→>

Move to select screen

<

↑> <↓>

Move to select item

<Esc>

Quit the BIOS Setup

<Enter>

Select item

<Page Up/+>

Increases the numeric value or makes changes

<Page Down/

->

Decreases the numeric value or makes changes

<Tab>

Select setup fields

<F1>

General help

<F2>

Previous value

<F3>

Load Optimized defaults

<F7>

Select boot

device

<F10>

Save configuration and Exit

Main Menu

The main menu lists the setup functions you can make changes to. You can use the arrow keys
( ↑↓ ) to select the item. The on-line description of the highlighted setup function is displayed at
the bottom of the screen.

Sub-Menu

If you find a right pointer symbol appears to the left of certain fields that means a sub-menu can
be launched from this field. A sub-menu contains additional options for a field parameter. You
can use arrow keys ( ↑↓ ) to highlight the field and press <Enter> to call up the sub-menu. Then

you can use the control keys to enter values and move from field to field within a sub-menu. If

you want to return to the main menu, just press the <Esc >.

CV-100/P1000 Series

Industrial Panel PC

| User’s Manual

79

Chapter 4: BIOS Setup

4.2 Main Setup

Press <Del> to enter BIOS CMOS Setup Utility, the Main Menu (as shown below) will appears
on the screen. Use arrow keys to move among the items and press <Enter> to accept or enter
a sub-menu.

4.2.1 System Date

Set the date. Please use <Tab> to switch between date elements.

4.2.2 System Time

Set the time. Please use <Tab> to switch between time elements.

CV-100/P1000 Series

Industrial Panel PC

| User’s Manual

8080

Chapter 4: BIOS Setup

4.3 Advanced Setup

4.3.1 ACPI Settings

Enable or disable ACPI Auto Configuration.

CV-100/P1000 Series

Industrial Panel PC

| User’s Manual

8181

Chapter 4: BIOS Setup

4.3.2 Super IO Configuration

You can use this screen to select options for the Super IO Configuration, and change the value
of the selected option.

■ Serial Port 1 Configuration

 Serial Port

This item will allow users to enable or disable serial port.

 Onboard Serial Port 1 Mode

Change the Serial interface. Select <RS232>, <RS422> or <RS485> interface.

 Change Settings

This setting is used to change the address & IRQ settings of the specified serial port.

CV-100/P1000 Series

Industrial Panel PC

| User’s Manual

8282

Chapter 4: BIOS Setup

■ Serial Port 2 Configuration
 Please see Serial Port 1 Configuration

■ Watch Dog Function

You can setup the system watch-dog timer, a hardware timer that generates a reset

when the software that it monitors does not respond as expected each time the watch
dog polls it.

 Watch Dog Mode

Change the Watch dog mode. Select <Sec> or <Min> mode.

 Watch Dog Timer

User can set a value in the range of 0 to 255.

■ Serial Port 3 Configuration

 Please see Serial Port 1 Configuration
 Serial port 3 configuration does not have Onboard Serial Port Mode, described

in the previous two configurations.

CV-100/P1000 Series

Industrial Panel PC

| User’s Manual

8383

Chapter 4: BIOS Setup

4.3.3 Hardware Monitor

These items display the current status of all monitored hardware devices/components such as

voltages and temperatures.

4.3.4 Serial Port Console Redirection

 Console Redirection

This item allows users to enable or disable console redirection.

CV-100/P1000 Series

Industrial Panel PC

| User’s Manual

84

Chapter 4: BIOS Setup

4.3.5 CPU Configuration

■ Socket 0 CPU Information

This section provides information on your CPU, frequency, and cache memory.

■ Active Processor Cores

Change the active processor cores. Select <All> or <1> mode.

■ Limit CPUID Maximum

This option is only useful if you are using an operating system that does not recognize all of
the features of your processor.
Allows user to determine whether to limit CPUID maximum value. Set this item to
Disabled: For Windows XP operating system.

Enabled: For legacy operating system such as Windows NT4.0. (Default: Disabled)

■ Execute Disable Bit

Enables or disables Intel Execute Disable Bit function.

■ Hardware Prefetcher

Enables or disables L2 Cache Hardware Prefetcher.

■ Adjacent Cache Line Prefetch

Enables or disables L2 prefetching of adjacent cache lines.

■ Intel Virtualization Technology

Enables or disables Intel Virtualization Technology. Virtualization enhanced by Intel

Virtualization Technology will allow a platform to run multiple operating systems and
applications in independent partitions. With virtualization, one computer system can
function as multiple virtual systems.

CV-100/P1000 Series

Industrial Panel PC

| User’s Manual

85

Chapter 4: BIOS Setup

4.3.6 Thermal Configuration

■ Critical Trip Point

Allows user to set the CPU temperature threshold. If the CPU temperature reaches this

value, the operating system will shut down the system. This item is configurable only when
DTS is enabled.

■ Passive Trip Point

Allows user to set the CPU temperature threshold. If the CPU temperature reaches this
value, the CPU frequency will be automatically reduced. This item is configurable only
when DTS is enabled.

■ DTS

Enables or disables the CPU overheating protection function. (Default: Disabled)

CV-100/P1000 Series

Industrial Panel PC

| User’s Manual

86

Chapter 4: BIOS Setup

4.3.7 SATA Configuration

■ Serial-ATA (SATA)

This item will allow users to enable or disable Serial ATA.

■ SATA Mode

This item will allow users to select IDE or AHCI Mode.

■ Serial – ATA Port 0

This item will allow users to enable or disable Serial-ATA Port 0.

■ Serial – ATA Port 1

This item will allow users to enable or disable Serial-ATA Port 1.

CV-100/P1000 Series

Industrial Panel PC

| User’s Manual

87

Chapter 4: BIOS Setup

4.3.8 OS Selection

This allows you to configure Windows OS version to install. The purpose of this is

to enable USB 3.0 controller interface. If you set Windows 7 and install the OS,

you will need to install USB 3.0 driver at the OS level to fully support USB 3.0
interfaces. If you set Windows 8.x and install it or later OS, the Windows OS will
easily support USB 3.0 interfaces.

■ OS Selection

This allows to set Windows 8.x or Windows 7 (default).

CV-100/P1000 Series

Industrial Panel PC

| User’s Manual

88

Chapter 4: BIOS Setup

4.3.9 Compatibility Support Module Configuration

■ CSM Support

Enables or disables UEFI CSM (Compatibility Support Module) to support a legacy PC boot
process.

■ Boot option filter

Allows user to select which type of operating system to boot.

UEFI and Legacy: Allows booting from operating systems that support legacy option ROM
or UEFI option ROM.
Legacy only: Allows booting from operating systems that only support legacy option ROM.
UEFI only: Allows booting from operating systems that only support UEFI option ROM.

This item is configurable only when CSM Support is set to Enabled.

■ PXE Function

This item will allow users to enable or disable PXE function.

■ Storage

Allows user to select whether to enable the UEFI or legacy option ROM for the Storage
device controller.
Do not launch: Disables option ROM.
UEFI only: Enables UEFI option ROM only.
Legacy only: Enables legacy option ROM only.

■ Video

Allows user to select whether to enable the UEFI or legacy option ROM for the Video
device controller.
Do not launch: Disables option ROM.
UEFI only: Enables UEFI option ROM only.
Legacy only: Enables legacy option ROM only.

CV-100/P1000 Series

Industrial Panel PC

| User’s Manual

89

Chapter 4: BIOS Setup

4.3.10 USB Configuration

■ Legacy USB Support

Allows USB keyboard/ mouse to be used in MS-DOS.

■ XHCI Hand-off

Determines whether to enable XHCI (USB3.0) Hand-off feature for an operating system
without XHCI (USB3.0) Hand-off support.

■ EHCI Hand-off

Determines whether to enable EHCI Hand-off feature for an operating system without EHCI
Hand-off support.

■ USB Mass Storage Driver Support

Enables or disables support for USB storage devices.

CV-100/P1000 Series

Industrial Panel PC

| User’s Manual

90

Chapter 4: BIOS Setup

4.4 Chipset

4.4.1 North Bridge

This section provides information on the installed memory size and memory/onboard graphics-

related configuration options.

CV-100/P1000 Series

Industrial Panel PC

| User’s Manual

91

Chapter 4: BIOS Setup

■ Intel IGD Configuration

This section provides onboard graphics-related configuration options.

 GOP Driver

This item will allow users to enable or disable GOP Driver.

 Integrated Graphics Device

This item will allow users to enable or disable Integrated Graphics Device.

 IGD Turbo Enable

This item will allow users to enable or disable IGD Turbo.

 Primary Display

"Auto or IGFX or PEG or PCIE or SG” optimal to Primary Display.

 GFX Boost

This item will allow users to enable or disable GFX Boost.

 Aperture Size

Aperture size optimal between 128MB, 256MB, or 512MB.

 DOP CG

This item will allow users to enable or disable DOP CG.

 GTT Size

GTT size optimal between 1MB or 2MB.

 IGD Thermal

This item will allow users to enable or disable IGD Thermal.

CV-100/P1000 Series

Industrial Panel PC

| User’s Manual

92

Chapter 4: BIOS Setup

4.4.2 South Bridge

■ Azalia HD Audio

Control detection of the Azalia device.

 Audio Controller

Enabled: Azalia will be unconditionally enabled.
Disabled: Azalia will be unconditionally disabled.

■ USB Configuration

 XHCI Mode

This setting disables/enables the USB XHCI controller. The eXtensible Host Controller
Interface (XHCI) is a computer interface specification that defines a register-level
description of a Host Controller for Universal Serial Bus (USB), which is capable of
interfacing to USB 1.0, 2.0, and 3.0 compatible devices. The specification is also
referred to as the USB 3.0 Host Controller specification.

 USB 2.0 (EHCI) Support

This setting disables/enables the USB EHCI controller. The Enhanced Host Controller

Interface (EHCI) specification describes the register-level interface for a Host Controller
for the Universal Serial Bus (USB) Revision 2.0.

 USB RMH Mode

This item will allow users to enable or disable USB RMH Mode.

 USB Port 0

This item will allow users to enable or disable USB Port 0.

 USB Port 1

This item will allow users to enable or disable USB Port 1.

 USB Port 2

This item will allow users to enable or disable USB Port 2.

 USB Port 3

This item will allow users to enable or disable USB Port 3.

■ Wake On LAN Enable

This item enables or disables Wake On LAN (WOL) function.

CV-100/P1000 Series

Industrial Panel PC

| User’s Manual

93

Chapter 4: BIOS Setup

■ PCI Express Configuration
 PCI Express Port 0

This item will allow users to enable or disable PCI Express Port 0.

 Speed

Change the PCI Express interface speed. Select <AUTO> ,<Gen 2> or <Gen 1>

 PCI Express Port 1

This item will allow users to enable or disable PCI Express Port 1.

 Speed

Change the PCI Express interface speed. Select <AUTO> ,<Gen 2> or <Gen 1>

 PCI Express Port 2

This item will allow users to enable or disable PCI Express Port 2.

 Speed

Change the PCI Express interface speed. Select <AUTO> ,<Gen 2> or <Gen 1>

 PCI Express Port 3

This item will allow users to enable or disable PCI Express Port 3.

 Speed

Change the PCI Express interface speed. Select <AUTO> ,<Gen 2> or <Gen 1>

■ High Precision Timer

Enable or disable High Precision Event Timer (HPET) in the operating system.

■ Restore AC Power Loss

This setting specifies whether your system will reboot after a power failure or interrupt
occurs. Available settings are:
Power Off: Leave the computer in the power off state.
Power On: Leave the computer in the power on state.
Last State: Restore the system to the previous status before power failure or interrupt
occurred.

CV-100/P1000 Series

Industrial Panel PC

| User’s Manual

94

Chapter 4: BIOS Setup

4.5 Security

This section allows you to configure and improve your system and allows you to
set up some system features according to your preference.

4.5.1 Administrator Password

Administrator Password controls access to the BIOS Setup utility.

4.5.2 User Password

User Password controls access to the system at boot and to the BIOS Setup utility.

CV-100/P1000 Series

Industrial Panel PC

| User’s Manual

95

Chapter 4: BIOS Setup

4.6 Boot

This section allows you to configure the boot settings.

4.6.1 Setup Prompt Timeout

Use this item to set number of seconds to wait for setup activation key.

4.6.2 Bootup NumLock State

Select the Power-on state for Numlock.

4.6.3 Full Screen Logo Show

This item allows user to enable or disable full screen logo show.

4.6.4 Fast Boot

This item allows user to enable or disable Fast Boot option.

4.6.5 UEFI Boot

This item allows user to enable or disable UEFI Boot option.

CV-100/P1000 Series

Industrial Panel PC

| User’s Manual

96

Chapter 4: BIOS Setup

4.7 Save & Exit

This section allows you to configure the boot settings.

4.7.1 Save Changes and Reset

This item allows user to reset system setup after saving changes.

4.7.2 Discard Changes and Reset

This item allows user to reset system setup without saving any changes.

4.7.3 Restore Defaults

This item allows user to restore/ load default values for all the options.

4.7.4 Save as User Defaults

This item allows user to save the changes done so far as user defaults.

4.7.5 Restore User Defaults

This item allows user to restore the user defaults to all the options.

Product Application

Chapter 5

P1001 / P1001E

Convertible Computer Modules

| User’s Manual

98

5.1 Digital I/O (DIO) application

This section describes DIO application of the product. The content and
application development are better understood and implemented by well
experienced professionals or developers.

Chapter 5: Product application

5.1.1 Digital I/O Programming Guide

5.1.1.1 Pins for Digital I/O for Cincoze P1001 series product

Item Standard

GPIO74 (Pin107)

DI

GPIO75 (Pin108)
GPIO76 (Pin109)

GPIO77 (Pin110)

GPIO80 (Pin111)

DO

GPIO81 (Pin112)
GPIO82 (Pin113)
GPIO83 (Pin114)

5.1.1.2 Programming Guide

To program the Super I/O chip F81866A configuration registers, the following
configuration procedures must be followed in sequence:

(1) Enter the Extended Function Mode
(2) Configure the configuration registers
(3) Exit the Extended Function Mode

The configuration register is used to control the behavior of the corresponding
devices. To configure the register, use the index port to select the index and then
write data port to alter the parameters. The default index port and data port are 0x4E
and 0x4F, respectively. To enable configuration, the entry key 0x87 must be

written to the index port. To disable configuration, write exit entry key 0xAA to
the index port. Following is an example to enable configuration and to disable

configuration by using debug.

-o 4e 87

-o 4e 87 (enable configuration)

-o 4e aa (disable configuration)

P1001 / P1001E

Convertible Computer Modules

| User’s Manual

99

Chapter 5: Product application

5.1.1.3 Relative Registers

To program the F81866A configuration registers, see the following configuration

procedures.

P1001 / P1001E

Convertible Computer Modules

| User’s Manual

100

Chapter 5: Product application

5.1.1.4 Sample Code in C Language

5.1.1.4.1 Control of GP74 to GP77 (DI1 ~ DI4)

#defineAddrPort 0x4E

#define DataPort 0x4F
<Enter the Extended Function Mode>

WriteByte(AddrPort, 0x87)
WriteByte(AddrPort, 0x87) // Must write twice to enter Extended mode

<Select Logic Device>
WriteByte(AddrPort, 0x07)
WriteByte(dataPort, 0x06)

//Select logic device 06h

<Input Mode Selection> //Set GP74 to GP77 input Mode
WriteByte(AddrPort, 0x80) // Select configuration register 80h

WriteByte(DataPort,0x0X)

//Set (bit 4~7) = 0 to select GP 74~77 as Input mode.

<input Value>
WriteByte(AddrPort, 0x82) // Select configuration register 82h

ReadByte(DataPort, Value) // Read bit 4~7(0xFx)= GP74 ~77

as High.

<Leave the Extended Function Mode>
WriteByte(AddrPort, 0xAA)