Cambridge Industries USA Inc. 2445 Augustine Drive, Suite 601
Santan Clara, CA 95054, USA
www.cambridgeig.com
WF-802 Family
The WF-802 is a family of products for home networking. The family supports a
base unit and a WiFi unit. The base units are Ethernet adapters supporting G.hn
PLC, G.hn coax or MoCa to facilitate communication from the home modem to
other areas of the home where a LAN may not be available.
Multiple Ethernet units can be placed throughout the home with or without WiFi to
extend the home network from the service modem.
WF-802-W (the WiFi module)
WF-802-G G.hn PLC Ethernet Adapter
WF-802-GW G.hn PLC Ethernet Adapter + 802.11ac Module
WF-802-C G.hn Coax Ethernet Adapter
WF-802-CW G.hn Coax Ethernet Adapter + 802.11ac Module
WF-802-C MoCA 2.0 Ethernet Adapter
WF-802-CW MoCa 2.0 Ethernet Adapter + 802.11ac Module
The units with the WiFi module are factory assembled. Each base unit has an alternate
cover that allows the WiFi unit to be connected via a bridge connector. The bridge
connector provides an Ethernet and power connection between the base and WiFi. The
host resides within WiFi module. Each of the base modules can operate independently as
it contains its own embedded hostless ASIC.
Base%
Units
WF-802-C
WF-802M
Base%+%WiFi
WF-802-CW
WF-802-MW
Cambridge Industries USA Inc. 2445 Augustine Drive, Suite 601
Santan Clara, CA 95054, USA
www.cambridgeig.com
There are Quick Start Guides (QSG) for all of the modules with and without WiFi. Each
QSG contains the required FCC statements pertaining to interference and modification
where appropriate.
There is no QSG for the WF-802-W as it is not sold as a standalone product.
Each unit that is configured with WiFi is assembled in the factory. Each type of base unit
requires different FW to support the specific base unit configured. The radio FW is
identical for each type of base unit.
It is not possible for the user to swap base units or operate the WF-802-W alone. There is
no user power connection. All units are wall plug powered through the base unit.