Chung Nam Electronics WLC300GRSM Users Manual
OEM Installation Manual
Chung Nam Electronics (CNE)
IEEE 802.11b/g USB WLAN Module
(Model #: WLC-300GRSM)
OEM Manual
Version 0.1
Nov 2008
1
OEM Installation Manual
Table of Contents
Chapter 1 Introduction ................................................................................................................. 3
1.1 Product ........................................................................................................................... 3
1.2 Main Features................................................................................................................. 3
1.3 LED Status ..................................................................................................................... 3
Chapter 2 Installation Procedure.................................................................................................. 4
2.1 Software Installation ...................................................................................................... 4
2.2 Hardware Installation..................................................................................................... 7
2.3 Profile............................................................................................................................. 7
2.4 Link Status ................................................................................................................... 11
2.5 Site Survey ................................................................................................................... 12
2.6 Statistics ....................................................................................................................... 13
2.7 Advanced...................................................................................................................... 14
Chapter 3 Configuration ............................................................................................................ 15
Chapter 4 Regulatory Information ............................................................................................. 16
4.1 FCC Information to User ............................................................................................. 16
4.2 FCC Electronic Emission Notices ............................................................................... 16
4.3 OEM installation Guide ............................................................................................... 16
Chapter 5 Technical Specifications............................................................................................ 18
2
OEM Installation Manual
Chapter 1 Introduction
1.1 Product
The 54M Wireless USB Module supports USB 2.0 signaling and IEEE 802.11b/g 2.4GHz
radio operation. It provides high-speed wireless connection with data rate up to 54Mbps.
Additionally, wireless roaming allows the user to move among different AP without losing the
current connection. The adapter provides excellent security features including：TKIP, AES,
WPA, and up to 128 bit WEP encryption security make the network almost impenetrable.
1.2 Main Features
● Complies with IEEE802.11g, IEEE802.11b standards
● Supports WPA data security, IEEE802.1x authentication, TKIP/AES encryption,
64/128-bitWEP encryption
● Supports 54/48/36/24/18/12/9/6Mbps or 11/5.5/2/1Mbps wireless LAN data transfer rates
● Provides USB interface
● Supports Ad-Hoc and Infrastructure modes
● Supports roaming between access points when configured in Infrastructure mode
● Eases configuration and provides monitoring information
● Supports Windows 98SE, Me, 2000, XP
● Internal Antenna
1.3 LED Status
The LED on the top of this card indicates Link/Act status. It blinks at green light when sending
and receiving data.
3
OEM Installation Manual
Chapter 2 Installation Procedure
2.1 Software Installation
2.1.1 Overview
The Adapter’s Setup Wizard will guide you through the installation procedure for Windows
98SE, Me, 2000 and XP. The Setup Wizard will guide you install the Utility and drivers.
If you install the hardware before the software, you will be prompted “Found New Hardware
Wizard”, click the Cancel button, and run the Setup Wizard program on the CD-ROM.
The Setup steps for Windows 98SE, Me, 2000 and XP are very similar. The following setup
steps are for windows 2000.
2.1.2 Software Installation for Windows 2000
1. Insert the Resource CD into your CD-ROM drive, click the Start button and choose Run.
In the field that appears, enter F:\XXX\Setup.exe (if “F” is the letter of your CD-ROM
drive; XXX presents the setup program path, which is labeled on the Resource CD), Figure
2-1 should then appear.
Figure 2-1 Preparing Setup
4
OEM Installation Manual
2. You will see a warning box shown in Figure 2-1, click the No button to end the installation.
Otherwise, click the Yes button to install driver, the Setup Wizard will display a screen
similar to that shown in Figure 2-2 after a moment.
Figure 2-2 Start Setup
User Guide
3. To continue, please waiting for running automatically for a moment, Figure 2-2. Click the
Cancel button to end the Installation.
4. The soft install automatically in the operating system, and appear a dialog box Figure 2-3.
Now, only a thing which you can do is Waiting!
Figure 2-3 waiting state dialog box
5
OEM Installation Manual
5. After the files have been successfully installed, the screen in Figure 2-4 will appear. Click
the Finish button to finish the wizard.
Figure 2-4 Finish installing
6. After installing the software, Please plug the adapter into your PC. If you need instructions
as to how to do this, please refer to next section - Hardware Installation. If you have
plugged it into you PC already, please unplug it and plug it back in. The OS will
automatically detect the adapter and automatically setup the driver for the adapter. If it does
not, please follow the setup steps to finish the driver installation.
After installing the driver successfully, you should see an icon appear in your system icon
box.
6
Loading...