Chuangwei RGB Electronics NHS8902 User Manual

Shenzhen skyworth RGB electronic co., LTD.

Model: HS-8902

Operation Instruction

Dear customer, thank you for purchasing skyworth products. I
will give you some information about this product.
This product meets the Bluetooth Version 5.0 specification.
Speech recognition performance can reach more than
95%(7M). Bluetooth remote control is over 15 meters away.
Vertical infrared remote-control distance of 8 meters.
Battery you need: 2*1.5 V AAA size.
The usage of this product is as follows:

1. Turn on the TV ac, press the standby button on the remote
control.

2. Long-press the composite key“home + left”on the remote
control until the light flashes.

3. Keep the remote control within one meter of the TV.

4. Facing the TV, press the Google button.

5. The remote control is paired with the TV via Bluetooth. The
TV screen pops up a pairing prompt.

6. Start using the product.
Television system has the memory function, for the first time
to use should be according to the above steps, later need not

operation, boot automatically connected. If you need to
reconnect, need according to the above steps again.

Note: This equipment has been tested and found to
comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following
measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different
from that to which the receiver is - connected.

- Consult the dealer or an experienced radio/television
technician for help.