C&H Technology VS-GB400TH120N User Manual

6121 Baker Road,
Suite 108
Minnetonka, MN 55345

Phone [phone]

Fax [phone]

[phone]

Thank you for downloading this document from C&H Technology, Inc.

Please contact the C&H Technology team for the following questions -

Technical

Application

Assembly

Availability

Pricing

Phone – 1-800-274-4284

E-Mail – [e-mail]

C & H TECHNOLOGY, INC. ● 6121 BAKER RD. SUITE 108 ● MINNETONKA, MINNESOTA 55345 ●

800-274-4284 ● 952-933-6190 ● FAX: [phone] ● WWW.CHTECHNOLOGY.COM

www.vishay.com

Double INT-A-PAK

PRODUCT SUMMARY

V

CES

at TC = 80 °C 400 A

I

C

(typical)

V

CE(on)

at I

= 400 A, 25 °C

C

VS-GB400TH120N

Vishay Semiconductors

Molding Type Module IGBT,

2 in 1 Package, 1200 V and 400 A

FEATURES

• High short circuit capability, self limiting 6 x I

• 10 μs short circuit capability

1200 V

1.9 V

•V

• Low inductance case

• Fast and soft reverse recovery antiparallel FWD

• Isolated copper baseplate using DCB (Direct Copper

• Material categorization: For definitions of compliance

TYPICAL APPLICATIONS

• AC inverter drives

• Switching mode power supplies

• Eletronic welders

DESCRIPTION

Vishay’s IGBT power module provides ultra low conduction
loss as well as short circuit ruggedness. It is designed for
applications such as general inverters and UPS.

with positive temperature coefficient

CE(on)

Bonding) technology

please see www.vishay.com/doc?99912

C

ABSOLUTE MAXIMUM RATINGS (TC = 25 °C unless otherwise noted)

PARAMETER SYMBOL TEST CONDITIONS MAX. UNITS

Collector to emitter voltage V

Gate to emitter voltage V

Collector current I

Pulsed collector current I

Diode continuous forward current I

Diode maximum forward current I

Maximum power dissipation P

Short circuit withstand time t

RMS isolation voltage V

2

t-value, diode I2tV

I

Note

(1)

Repetitive rating: Pulse width limited by maximum junction temperature.

CM

CES

GES

C

F

FM

SC

ISOL

TC = 25 °C, TJ = 150°C 800

= 80 °C, TJ = 150°C 400

T

C

(1)

D

tp = 1 ms, TC = 80 °C 800

TC = 80 °C 400

tp = 1 ms 800

TJ = 150 °C 2604 W

TJ = 125 °C 10 μs

f = 50 Hz, t = 1 min 2500 V

= 0 V, t = 10 ms, TJ = 125 °C 34 kA2s

R

1200

± 20

V

A

Revision: 06-Mar-13

For technical questions within your region: [e-mail]

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

1

, [e-mail], [e-mail]

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Document Number: 94788

VS-GB400TH120N

www.vishay.com

IGBT ELECTRICAL SPECIFICATIONS (TC = 25 °C unless otherwise noted)

PARAMETER SYMBOL TEST CONDITIONS MIN. TYP. MAX. UNITS

Collector to emitter breakdown voltage V

(BR)CES

TJ = 25 °C 1200 - -

VGE = 15 V, IC = 400 A, TJ = 25 °C - 1.9 -

Gate to emitter threshold voltage V

Collector cut-off current I

Gate to emitter leakage current I

CE(on)

GE(th)

CES

GES

= 15 V, IC = 400 A, TJ = 125 °C - 2.1 -

V

GE

VCE = VGE, IC = 16 mA, TJ = 25 °C 5.0 6.2 7.0

VCE = V

VGE = V

, VGE = 0 V, TJ = 25 °C - - 5.0 mA

CES

, VCE = 0 V, TJ = 25 °C - - 400 nA

GES

SWITCHING CHARACTERISTICS

PARAMETER SYMBOL TEST CONDITIONS MIN. TYP. MAX. UNITS

Turn-on delay time t

Rise time t

Turn-off delay time t

Fall time t

Turn-on switching loss E

Turn-off switching loss E

Turn-on delay time t

Rise time t

Turn-off delay time t

Fall time t

Turn-on switching loss E

Turn-off switching loss E

Input capacitance C

Reverse transfer capacitance C

SC data I

Internal gate resistance R

Stray inductance L

Module lead resistance, terminal to chip R

d(on)

r

d(off)

f

on

off

d(on)

r

d(off)

f

on

off

ies

oes

res

SC

g

CE

CC’+EE’

VCC = 600 V, IC = 400 A, Rg = 2.5 ,
V

= ± 15 V, TJ = 25 °C

GE

VCC = 600 V, IC = 400 A, Rg = 2.5 ,
V

= ± 15 V, TJ = 125 °C

GE

VGE = 0 V, VCE = 25 V, f = 1.0 MHz

tsc  10 μs, VGE = 15 V, TJ = 125 °C,

= 900 V, V

V

CC

CEM

 1200 V

TC = 25 °C - 0.32 - m

Vishay Semiconductors

VCollector to emitter voltage V

- 125 -

-71-

- 540 -

-72-

-44-

-40-

- 130 -

-75-

- 600 -

-80-

-48-

-43-

- 32.7 -

-2.42-

-1.50-

- 1900 - A

-2-

- - 18 nH

ns

mJ

ns

mJ

nFOutput capacitance C

DIODE ELECTRICAL SPECIFICATIONS (TC = 25 °C unless otherwise noted)

PARAMETER SYMBOL TEST CONDITIONS MIN. TYP. MAX. UNITS

= 25 °C - 2.15 2.20

T

Diode forward voltage V

Diode reverse recovery charge Q

F

rr

IF = 400 A

IF = 400 A, VR = 600 V,

Diode peak reverse recovery current I

Diode reverse recovery energy E

rr

rec

Revision: 06-Mar-13

For technical questions within your region: [e-mail]

/dt = - 6000 A/μs,

dI

F

V

= - 15 V

GE

2

, [e-mail], [e-mail]

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

J

T

= 125 °C - 1.99 2.03

J

= 25 °C - 52 -

T

J

T

= 125 °C - 64 -

J

TJ = 25 °C - 360 -

T

= 125 °C - 420 -

J

TJ = 25 °C - 20 -

T

= 125 °C - 27 -

J

Document Number: 94788

V

μC

A

mJ

VS-GB400TH120N

I

C

(A)

VCE (V)

0

100

200

300

400

500

600

700

800

01 342

VGE = 15 V

25 °C

125 °C

0

100

200

300

400

500

600

700

800

67 910118

I

C

(A)

VGE (V)

VCE = 20 V

125 °C

25 °C

0

20

40

60

80

100

120

140

160

180

0 200 600 800 1000400

VGE = ± 15 V

T

J

= 125 °C

R

g

= 2.5

Ω

VCC = 600 V

IC (A)

E

on

, E

off

(mJ)

E

on

E

off

0

20

40

60

80

100

120

140

160

180

E

on

, E

off

(mJ)

E

on

E

off

0 5101520

VGE = ± 15 V

T

J

= 125 °C

I

C

= 400 A

V

CC

= 600 V

Rg (Ω)

www.vishay.com

THERMAL AND MECHANICAL SPECIFICATIONS

PARAMETER SYMBOL TEST CONDITIONS MIN. TYP. MAX. UNITS

Operating junction temperature range T

Storage temperature range T

Junction to case,

IGBT

per 1/2 module

Case to sink R

Mounting torque

Weight 340 g

R

J

STG

thJC

thCS

Conductive grease applied - 0.032 -

Power terminal screw: M6 2.5 to 5.0

Mounting screw: M6 3.0 to 6.0

Vishay Semiconductors

- 40 - 150

- 40 - 125

- - 0.048

°C

K/WDiode - - 0.085

Nm

Fig. 1 - Typical Output Characteristics

Revision: 06-Mar-13

Fig. 2 - Typical Transfer Characteristics

For technical questions within your region: [e-mail]

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Fig. 3 - Switching Loss vs. I

Fig. 4 - Switching Loss vs. R

3

C

g

Document Number: 94788

, [e-mail], [e-mail]

VS-GB400TH120N

VCE (V)

C (nF)

10

1

10

2

10

0

10

-1

C

ies

C

oes

01 342

C

res

0 200 600 800 1000400

t (ns)

10

2

10

3

10

1

VGE = ± 15 V

T

J

= 125 °C

R

g

= 2.5 Ω

V

CC

= 600 V

t

d(off)

t

d(on)

t

f

t

r

IC (A)

I

F

(A)

VF (V)

01 2 3

800

600

400

200

0

25 °C

125 °C

www.vishay.com

20

Vishay Semiconductors

(V)

GE

V

16

VCC = 600 V

12

8

4

0

- 4

- 8
01 34 52

Qg - (μC)

Fig. 5 - Gate Charge Characteristics

IC = 150 A
T

=

25 °C

J

t (ns)

Fig. 7 - Typical Switching Time vs.I

4

10

V

= 600 V

CC

I

= 400 A

C

VGE = ± 15 V

= 125 °C

T

J

3

10

2

10

t

t

C

d(off)

d(on)

t

r

t

f

Fig. 6 - Typical Capacitance vs. Collector-to-Emitter Voltage

Revision: 06-Mar-13

For technical questions within your region: [e-mail]

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

1

10

0 5 10 15 20

Fig. 8 - Typical Switching Time vs. Gate Resistance R

Fig. 9 - Typical Forward Characteristics Diode

4

, [e-mail], [e-mail]

Rg (Ω)

g

Document Number: 94788

www.vishay.com

tp (s)

Z

thJC

- (K/W)

10

0

10

-1

10

-2

10

-3

10

-4

10

0

10

-1

10

-2

10

-3

10

-4

10

-5

IGBT

Diode

CIRCUIT CONFIGURATION

Fig. 10 - Transient Thermal Impedance

VS-GB400TH120N

Vishay Semiconductors

6
7

1

2

3

5
4

LINKS TO RELATED DOCUMENTS

Dimensions www.vishay.com/doc?95538

Revision: 06-Mar-13

5

For technical questions within your region: [e-mail]

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

, [e-mail], [e-mail]

Document Number: 94788

www.vishay.com

Mounting depth max. 11

3-M6

1612

2.8 x 0.5

31 ± 0.5

30.5 ± 0.5

7.2 ± 0.5

23 ± 0.3

26

4.5

28 ± 0.3

Ø 6.4 ± 0.2

28 ± 0.3 20.2

70

30

48 ± 0.4

35.6

15 ± 0.4

27 ± 0.4

93 ± 0.4

106.6

6226

DIMENSIONS in millimeters (inches)

Outline Dimensions

Vishay Semiconductors

Double INT-A-PAK

Revision: 27-May-13

For technical questions within your region: [e-mail]

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

1

, [e-mail], [e-mail]

Document Number: 95538

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Legal Disclaimer Notice

www.vishay.com

Vishay

Disclaimer

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.

Material Category Policy

Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.

Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.

Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.

Revision: 02-Oct-12

1

Document Number: 91000