C&H Technology VS-GB100TP120N User Manual

6121 Baker Road,
Suite 108
Minnetonka, MN 55345

www.chtechnology.com

Phone [phone]

Fax [phone]

1-800-274-4284

Thank you for downloading this document from C&H Technology, Inc.

Please contact the C&H Technology team for the following questions -

Technical

Application

Assembly

Availability

Pricing

Phone – 1-800-274-4284

E-Mail – [e-mail]

www.chtechnology.com - SPECIALISTS IN POWER ELECTRONIC COMPONENTS AND ASSEMBLIES - www.chtechnology.com

www.vishay.com

INT-A-PAK

PRODUCT SUMMARY

V

CES

at TC = 80 °C 100 A

I

C

(typical)

V

CE(on)

at I

= 100 A, 25 °C

C

Package INT-A-PAK

Circuit Half Bridge

Molding Type Module IGBT,

2 in 1 Package, 1200 V, 100 A

FEATURES

• High short circuit capability, self limiting to 6 x I

• 10 μs short circuit capability

1200 V

1.80 V

•V

• Maximum junction temperature 150 °C

• Low inductance case

• Fast and soft reverse recovery antiparallel FWD

• Isolated copper baseplate using DCB (Direct Copper

• Material categorization: For definitions of compliance

TYPICAL APPLICATIONS

• AC inverter drives

• Switching mode power supplies

• Electronic welders

DESCRIPTION

Vishay’s IGBT power module provides ultra low conduction
loss as well as short circuit ruggedness. It is designed for
applications such as general inverters and UPS.

with positive temperature coefficient

CE(on)

Bonding) technology

please see www.vishay.com/doc?99912

VS-GB100TP120N

Vishay Semiconductors

C

ABSOLUTE MAXIMUM RATINGS (TC = 25 °C unless otherwise noted)

PARAMETER SYMBOL TEST CONDITIONS MAX. UNITS

Collector to emitter voltage V

Gate to emitter voltage V

Collector current I

Pulsed collector current I

Diode continuous forward current I

Diode maximum forward current I

Maximum power dissipation P

Short circuit withstand time t

RMS isolation voltage V

2

t-value, diode I2tV

I

Note

(1)

Repetitive rating: Pulse width limited by maximum junction temperature.

CM

CES

GES

C

F

FM

SC

ISOL

TC = 25 °C 200

= 80 °C 100

T

C

(1)

D

tp = 1 ms 200

TJ = 150 °C 650 W

TJ = 125 °C 10 μs

f = 50 Hz, t = 1 min 2500 V

= 0 V, t = 10 ms, TJ = 125 °C 1050 A2s

R

1200

± 20

100

200

V

A

Revision: 17-May-13

For technical questions within your region: [e-mail]

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

1

, [e-mail], [e-mail]

Document Number: 94821

VS-GB100TP120N

www.vishay.com

IGBT ELECTRICAL SPECIFICATIONS (TC = 25 °C unless otherwise noted)

PARAMETER SYMBOL TEST CONDITIONS MIN. TYP. MAX. UNITS

Collector to emitter breakdown voltage V

(BR)CES

VGE = 0 V, IC = 1.0 mA, TJ = 25 °C 1200 - -

VGE = 15 V, IC = 100 A, TJ = 25 °C - 1.80 2.20

Gate to emitter threshold voltage V

Collector cut-off current I

Gate to emitter leakage current I

CE(on)

GE(th)

CES

GES

V

= 15 V, IC = 100 A, TJ = 125 °C - 2.05 -

GE

VCE = VGE, IC = 4.0 mA, TJ = 25 °C 5.0 6.2 7.0

VCE = V

VGE = V

, VGE = 0 V, TJ = 25 °C - - 5.0 mA

CES

, VCE = 0 V, TJ = 25 °C - - 400 nA

GES

SWITCHING CHARACTERISTICS

PARAMETER SYMBOL TEST CONDITIONS MIN. TYP. MAX. UNITS

Turn-on delay time t

Rise time t

Turn-off delay time t

Fall time t

Turn-on switching loss E

Turn-off switching loss E

Turn-on delay time t

Rise time t

Turn-off delay time t

Fall time t

Turn-on switching loss E

Turn-off switching loss E

Input capacitance C

Reverse transfer capacitance C

SC data I

Internal gate resistance R

Stray inductance L

Module lead resistance, terminal to chip R

d(on)

r

d(off)

f

on

off

d(on)

r

d(off)

f

on

off

ies

oes

res

SC

gint

CE

CC’+EE’

VCC = 600 V, IC = 100 A, Rg = 5.6 ,
V

= ± 15 V, TJ = 25 °C

GE

VCC = 600 V, IC = 100 A, Rg = 5.6 ,
V

= ± 15 V, TJ = 125 °C

GE

VGE = 0 V, VCE = 25 V, f = 1.0 MHz, 
T

= 25 °C

J

tsc  10 μs, VGE = 15 V, TJ = 125 °C, 

= 900 V, V

V

CC

CEM

 1200 V

TC = 25 °C - 0.75 - m

Vishay Semiconductors

VCollector to emitter voltage V

- 279 -

-61-

- 308 -

- 205 -

-5.56-

-6.95-

- 287 -

-63-

- 328 -

- 360 -

-7.85-

- 10.55 -

-7.43-

-0.52-

-0.34-

- 470 - A

-2-

- - 30 nH

ns

mJ

ns

mJ

nFOutput capacitance C

DIODE ELECTRICAL SPECIFICATIONS (TC = 25 °C unless otherwise noted)

PARAMETER SYMBOL TEST CONDITIONS MIN. TYP. MAX. UNITS

= 25 °C - 1.90 2.30

T

Diode forward voltage V

Diode reverse recovery charge Q

F

rr

IF = 100 A

IF = 100 A, VR = 600 V,

Diode peak reverse recovery current I

Diode reverse recovery energy E

rr

rec

Revision: 17-May-13

For technical questions within your region: [e-mail]

/dt = - 2000 A/μs,

dI

F

V

= - 15 V

GE

2

, [e-mail], [e-mail]

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

J

T

= 125 °C - 2.00 -

J

= 25 °C - 5.52 -

T

J

T

= 125 °C - 11.88 -

J

TJ = 25 °C - 85 -

T

= 125 °C - 103 -

J

TJ = 25 °C - 2.06 -

T

= 125 °C - 5.56 -

J

Document Number: 94821

V

μC

A

mJ

200

175

150

125

100

75

50

25

0

0 0.5 1.51 2 2.5 3

VCE (V)

I

C

(A)

VGE = 15 V

25 °C

125 °C

Rg (Ω)

E

on

, E

off

(mJ)

30

25

40

35

20

15

10

5

0

010 3020 40 50 60

VGE = ± 15 V

T

J

= 125 °C

I

C

= 100 A

V

CC

= 600 V

E

on

E

off

VS-GB100TP120N

www.vishay.com

THERMAL AND MECHANICAL SPECIFICATIONS

PARAMETER SYMBOL TEST CONDITIONS MIN. TYP. MAX. UNITS

Operating junction temperature T

Storage temperature range T

Junction to case

IGBT (per 1/2 module)

Case to sink R

Mounting torque

Weight of module 150 g

R

J

STG

thJC

thCS

Conductive grease applied - 0.05 -

Power terminal screw: M5 2.5 to 5.0

Mounting screw: M6 3.0 to 5.0

30

V

CC

R

= 5.6 Ω

g

25

VGE = ± 15 V

T

J

20

(mJ)

15

off

, E

on

10

E

Vishay Semiconductors

- - 150

- 40 - 125

- - 0.19

= 600 V

=

125 °C

E

off

°C

K/WDiode (per 1/2 module) - - 0.28

Nm

Fig. 1 - IGBT Typical Output Characteristics

200

175

150

125

100

(A)

C

I

75

50

25

0

56 87 9 10 11 12 13

Revision: 17-May-13

Fig. 2 - IGBT Typical Transfer Characteristics

For technical questions within your region: [e-mail]

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

VGE (V)

125 °C

25 °C

VCE = 20 V

5

0

025 7550 100 125 150 175 200

E

on

IC (A)

Fig. 3 - IGBT Switching Loss vs. I

Fig. 4 - IGBT Switching Loss vs. R

3

Document Number: 94821

C

g

, [e-mail], [e-mail]

www.vishay.com

200

220

180

160

140

120

100

80

60

40

20

0

VCE (V)

I

C

(A)

0 250 750500 12501000 1500

VGE = ± 15 V

T

J

= 125 °C

R

g

= 5.6 Ω

IC, Module

t (s)

Z

thJC

(K/W)

IGBT

10

0

10

-1

10

-2

10

0

10

1

10

-1

10

-2

10

-3

200

175

150

125

100

75

50

25

0

0 0.5 1.51 2 2.5 3

VF (V)

I

F

(A)

25 °C

125 °C

05025 75 100 125 175150 200

10

9

8

7

6

5

4

3

2

1

0

VGE = - 15 V

T

J

= 125 °C

R

g

= 5.6 Ω

V

CC

= 600 V

E

rec

IF (A)

E (mJ)

VS-GB100TP120N

Vishay Semiconductors

Fig. 5 - RBSOA

Revision: 17-May-13

For technical questions within your region: [e-mail]

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

Fig. 7 - Diode Forward Characteristics Fig. 8 - Diode Switching Loss vs. I

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Fig. 6 - IGBT Transient Thermal Impedance

4

C

Document Number: 94821

, [e-mail], [e-mail]

www.vishay.com

t (s)

Z

thJC

(K/W)

Diode

10

0

10

-1

10

-2

10

0

10

1

10

-1

10

-2

10

-3

1

6
7

3

2

5
4

E (mJ)

8

7

6

5

4

3

V

= 600 V

CC

2

I

= 100 A

C

1

VGE = - 15 V

T

= 125 °C

J

0

010 3020 40 6050

Rg (Ω)

E

rec

VS-GB100TP120N

Vishay Semiconductors

CIRCUIT CONFIGURATION

Fig. 9 - Diode Switching Loss vs. R

g

Fig. 10 - Diode Transient Thermal Impedance

Revision: 17-May-13

LINKS TO RELATED DOCUMENTS

Dimensions www.vishay.com/doc?95524

5

For technical questions within your region: [e-mail]

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

, [e-mail], [e-mail]

Document Number: 94821

Legal Disclaimer Notice

www.vishay.com

Vishay

Disclaimer

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.

Material Category Policy

Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.

Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.

Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.

Revision: 02-Oct-12

1

Document Number: 91000