C&H Technology ST330CPbF User Manual
6121 Baker Road,
Suite 108
Minnetonka, MN 55345
www.chtechnology.com
Phone (952) 933-6190
Fax (952) 933-6223
1-800-274-4284
Thank you for downloading this document from C&H Technology, Inc.
Please contact the C&H Technology team for the following questions -
Technical
Application
Assembly
Availability
Pricing
Phone – 1-800-274-4284
E-Mail – sales@chtechnology.com
www.chtechnology.com - SPECIALISTS IN POWER ELECTRONIC COMPONENTS AND ASSEMBLIES - www.chtechnology.com
Vishay High Power Products
Phase Control Thyristors
(Hockey PUK Version), 720 A
FEATURES
• Center amplifying gate
• Metal case with ceramic insulator
• International standard case TO-200AB (E-PUK)
• Lead (Pb)-free
• Designed and qualified for industrial level
ST330CPbF Series
RoHS
COMPLIANT
TO-200AB (E-PUK)
TYPICAL APPLICATIONS
• DC motor controls
PRODUCT SUMMARY
I
T(AV)
720 A
• Controlled DC power supplies
• AC controllers
MAJOR RATINGS AND CHARACTERISTICS
PARAMETER TEST CONDITIONS VALUES UNITS
I
T(AV)
I
T(RMS)
I
TSM
2
t
I
V
DRM/VRRM
t
q
T
J
T
hs
T
hs
50 Hz 9000
60 Hz 9420
50 Hz 405
60 Hz 370
Typical 100 µs
720 A
55 °C
1420 A
25 °C
400 to 1600 V
- 40 to 125 °C
ELECTRICAL SPECIFICATIONS
A
kA2s
VOLTAGE RATINGS
V
TYPE NUMBER
ST330C..C
Document Number: 94407 For technical questions, contact: ind-modules@vishay.com
Revision: 06-May-08 1
VOLTAGE
CODE
04 400 500
08 800 900
12 1200 1300
14 1400 1500
16 1600 1700
DRM/VRRM
, MAXIMUM REPETITIVE PEAK
AND OFF-STATE VOLTAGE
V
V
, MAXIMUM
NON-REPETITIVE PEAK VOLTAGE
RSM
V
I
DRM/IRRM
AT T
= TJ MAXIMUM
J
www.vishay.com
MAXIMUM
mA
50
ST330CPbF Series
Vishay High Power Products
Phase Control Thyristors
(Hockey PUK Version), 720 A
ON-STATE CONDUCTION
PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS
Maximum average on-state current
at heatsink temperature
Maximum RMS on-state current I
I
T(RMS)
Maximum peak, one-cycle
non-repetitive surge current
2
Maximum I
Maximum I
t for fusing I2t
2
√t for fusing I2√t t = 0.1 to 10 ms, no voltage reapplied 4050 kA2√s
Low level value of threshold voltage V
High level value of threshold voltage V
Low level value of on-state slope resistance r
High level value of on-state slope resistance r
Maximum on-state voltage V
Maximum holding current I
Typical latching current I
T(AV)
180° conduction, half sine wave
double side (single side) cooled
DC at 25 °C heatsink temperature double side cooled 1420
I
TSM
T(TO)1
T(TO)2
t1
t2
TM
H
L
t = 10 ms
t = 8.3 ms 9420
t = 10 ms
t = 8.3 ms 7920
t = 10 ms
t = 8.3 ms 370
t = 10 ms
t = 8.3 ms 262
(16.7 % x π x I
(I > π x I
(16.7 % x π x I
(I > π x I
Ipk = 1810 A, TJ = TJ maximum, tp = 10 ms sine pulse 1.96 V
TJ = 25 °C, anode supply 12 V resistive load
No voltage
reapplied
100 % V
reapplied
No voltage
RRM
Sinusoidal half wave,
initial T
= TJ maximum
J
reapplied
100 % V
RRM
reapplied
< I < π x I
T(AV)
), TJ = TJ maximum 0.92
T(AV)
< I < π x I
T(AV)
), TJ = TJ maximum 0.57
T(AV)
), TJ = TJ maximum 0.91
T(AV)
), TJ = TJ maximum 0.58
T(AV)
720 (350) A
55 (75) °C
9000
7570
405
287
600
1000
A
kA2s
V
mΩ
mA
SWITCHING
PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS
Maximum non-repetitive rate of
rise of turned-on current
Typical delay time t
Typical turn-off time t
dI/dt
d
q
Gate drive 20 V, 20 Ω, t
T
= TJ maximum, anode voltage ≤ 80 % V
J
≤ 1 µs
r
DRM
Gate current 1 A, dIg/dt = 1 A/µs
V
= 0.67 % V
d
, TJ = 25 °C
DRM
ITM = 550 A, TJ = TJ maximum, dI/dt = 40 A/µs,
V
= 50 V, dV/dt = 20 V/µs, gate 0 V 100 Ω, tp = 500 µs
R
1000 A/µs
1.0
µs
100
BLOCKING
PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS
Maximum critical rate of rise of
off-state voltage
Maximum peak reverse and
off-state leakage current
dV/dt T
,
I
RRM
I
DRM
= TJ maximum linear to 80 % rated V
J
TJ = TJ maximum, rated V
DRM/VRRM
DRM
500 V/µs
applied 50 mA
www.vishay.com For technical questions, contact: ind-modules@vishay.com
Document Number: 94407
2 Revision: 06-May-08
Loading...