C&H Technology LS43-50 User Manual

6121 Baker Road, Suite 108 Minnetonka, MN 55345
www.chtechnology.com
Fax (952) 933-6223
1-800-274-4284
Thank you for downloading this document from C&H Technology, Inc.
Please contact the C&H Technology team for the following questions -
Technical
Application
Assembly
Availability
Pricing
Phone – 1-800-274-4284
E-Mail – sales@chtechnology.com
www.chtechnology.com - SPECIALISTS IN POWER ELECTRONIC COMPONENTS AND ASSEMBLIES - www.chtechnology.com
®
Powerex, Inc.,173 Pavilion Lane, Youngwood, Pennsylvania 15697 (724) 925-7272 POW-R-BLOK www.pwrx.com
Single SCR Isolated Module
LS43__50
TM
500 Amperes / Up to 1600 Volts
E
OUTLINE DRAWING
G
H
B
"Q"
F
M N
KA
K
K
G
T
D
A
R
A
Ordering Information:
Select the complete eight-digit module part number from the table below. Example: LS431650 is a 1600 Volt, 500 Ampere Single SCR Isolated
POW-R-BLOK
TM
Module
Type
LS43 08
Voltage
Volts
(x100)
10 12 14 16
Current
Amperes
(x10)
50
K
J
"P"
L
LS43__50 Single SCR POW-R-BLOK
500 Amperes / Up to 1600 Volts
C
LS43 Outline Dimensions
Dimension Inches Millimeters
A 3.15 80.0
B 1.50 38.0
C 2.05 52.1
D 3.62 92.0
E 1.97 50.0
F 0.39 9.9
G 0.24 6.1
H 0.75 19.0
J 0.99 25.1
K 0.48 12.2
L 0.12 3.1
M 1.45 36.8
N 1.76 44.7
P M10 Metric M10
Q 0.250 Dia. 6.35 Dia.
R 0.99 25.1
S 0.110 x .032 2.5 x 0.8
T 3.99 101.3
Note: Dimensions are for reference only.
TM
Module
Description:
Powerex Single SCR Modules are designed for use in applications requiring rectification and isolated packaging. The modules are isolated for easy mounting with other components on a common heatsink.
POW-R-BLOK
recognized by the Underwriters Laboratories.
TM
has been tested and
Features:
Electrically Isolated Heatsinking Aluminum Nitride Insulator Compression Bonded Elements Metal Baseplate Low Thermal Impedance
for Improved Current Capability Quick Connect Gate Terminal with Provision for Keyed Mating Plug UL Recognized
Benefits:
No Additional Insulation Components Required
Easy Installation No Clamping Components
Required Reduce Engineering Time
Applications:
Bridge Circuits AC & DC Motor Drives Battery Supplies Power Supplies Large IGBT Circuit Front Ends
Revision Date: 02/16/2010
®
A
2
2
Powerex, Inc.,173 Pavilion Lane, Youngwood, Pennsylvania 15697 (724) 925-7272 POW-R-BLOK www.pwrx.com
Single SCR Isolated Module
LS43__50
500 Amperes / Up to 1600 Volts
TM
Absolute Maximum Ratings
Characteristics Conditions Symbol Units
& V
Repetitive Peak Forward and Reverse Blocking
V
DRM
Voltage
Non-Repetitive Peak Blocking Voltage
V (t < 5 msec) RMS Forward Current
180° Conduction, T
=78°C
C
I
verage Forward Current 180° Conduction, TC=86°C
180° Conduction, T
Peak One Cycle Surge Current, Non-Repetitive
60 Hz, 100% V
50 Hz, 100% V
Peak Three Cycle Surge Current, Non-Repetitive 60 Hz, 100%V
Peak Ten Cycle Surge Current, Non-Repetitive 60 Hz, 100% V
I2t for Fusing for One Cycle
8.3 milliseconds
=78°C
C
reapplied
RRM
reapplied
RRM
reapplied I
RRM
reapplied I
RRM
10 milliseconds
Maximum Rate-of-Rise of On-State Current,
Per JEDEC Standard 397 5.2.2.6 (Repetitive) Operating Temperature TJ -40 to +130 °C
Storage Temperature T
Max. Mounting Torque, M6 Mounting Screw
Max. Mounting Torque, M10 Terminal Screw
Module Weight, Typical 816 g
1.80 lb
V Isolation @ 25C
V
Information presented is based upon manufacturers testing and projected capabilities. This information is subject to change without notice. The manufacturer makes no claim as to the suitability of use, reliability, capability, or future availability of this product.
up to 1600 V
RRM
V
RSM
900
T(RMS)
I
T(AV)
I
T(AV)
I
TSM
I
TSM
12,250 A
TSM
10,500 A
TSM
I
t
2
t
I
+ 100 V
RRM
500 575
17,000 16,300
1.20 x 10
1.33 x 10
6
6
A
A A A A
A
sec
2
sec
A
di/dt 200 A/µs
-40 to +150 °C
stg
rms
55
6
110
12
3000 V
in. – Lb.
Nm
in. – Lb.
Nm
Revision Date: 02/16/2010
®
Powerex, Inc.,173 Pavilion Lane, Youngwood, Pennsylvania 15697 (724) 925-7272 POW-R-BLOK www.pwrx.com
Single SCR Isolated Module
LS43__50
500 Amperes / Up to 1600 Volts
TM
Electrical Characteristics, TJ=25°C unless otherwise specified
Characteristics Symbol Test Conditions Min.
Repetitive Peak Forward Leakage Current I
Repetitive Peak Reverse Leakage Current I
Peak On-State Voltage VFM I
Threshold Voltage, Low-level Slope Resistance, Low-level
Threshold Voltage, High-level Slope Resistance, High-level
VTM Coefficients, Full Range
Up to 1600V, TJ=130°C 80 mA
DRM
Up to 1600V, TJ=130°C 80 mA
RRM
=1500A 1.30 V
TM
V
(TO)1
r
T1
V
(TO)2
r
T2
T
= 130°C, I = 15%I
J
T
= 130°C, I = πI
J
T
= 130°C, I = 10A to 6kA
J
T(AV)
T(AV)
= A+ B Ln I +C I + D Sqrt I
V
TM
to πI
to I
TSM
T(AV)
A = B = C = D =
Minimum dV/dt dV/dt
Gate Trigger Current IGT T
Gate Trigger Voltage VGT T
Non-Triggering Gate Voltage V
Peak Forward Gate Current I
Peak Reverse Gate Voltage V
T
GDM
4.0 Amp
GTM
5 Volts
GRM
Exponential to V
=130°C, Gate Open
T
j
=25°C, VD=12V 200 mA
j
=25°C, VD=12V 3.0 Volts
j
=130°C, VD= ½ V
j
DRM
DRM
0.25 Volts
1000 Typ. V/µs
Max.
0.8824
-4.46E-02
8.12E-05
1.54E-02
0.81
0.32
0.90
0.26
Units
V
m
V
m
Thermal Characteristics
Characteristics Symbol
Thermal Resistance, Junction to Case
Thermal Impedance Coefficients
Thermal Resistance, Case to Sink Lubricated
R
Z
R
ΘJ-C
ΘJ-C
ΘC-S
Z
Per Module/Junction
= K1 (1-exp(-t/τ1))
ΘJ-C
+ K
2
+ K
3
+ K
4
Per Module 0.02 °C/W
Max.
(1-exp(-t/τ2))
(1-exp(-t/τ3))
(1-exp(-t/τ4))
K
= 8.03E-04
1
K2 = 1.03E-02
K3 = 1.64E-02
K4 = 3.75E-02
0.0650
τ
= 3.39E-04
1
τ2 = 3.15E-03
τ3 = 0.106
τ
= 2.066
4
Revision Date: 02/16/2010
Units
°C/W
®
Powerex, Inc.,173 Pavilion Lane, Youngwood, Pennsylvania 15697 (724) 925-7272 POW-R-BLOK www.pwrx.com
Single SCR Isolated Module
LS43__50
TM
500 Amperes / Up to 1600 Volts
5.00
4.00
3.00
2.00
On-State Voltage - Vtm - Volts
1.00
0.00 10 100 1000 10000
700
600
500
400
300
200
Max. Power Dissipation - Watts
100
0
0 100 200 300 400 500 600
Maximum On-State Forward Voltage Drop
Instantaneous On-State Current - Itm - Amperes
Maximum On-State Power Dissipation
(Sinusoidal Waveform)
30°
15°
Average On-State Current - It(av) - Amperes
( Tj = 130 °C )
90°
60°
0
CONDUCTION ANGLE
120°
180
360
180°
Maximum Transient Thermal Impedance
.07000
.06000
.05000
.04000
.03000
.02000
Thermal Impedance - Zjc - °C/W
.01000
.00000
0.0001 0.001 0.01 0.1 1 10 100
(Junction to Case)
Time - t - Seconds
Maximum Allowable Case Temperature
(Sinusoidal Waveform)
130 125 120 115 110 105 100
95 90
Max. Case Temperature - Tcase -°C_
85 80
0 100 200 300 400 500 600
15°
30°
60°
Average On-State Current - It(av) - Amperes
180
0
CONDUCTION ANGLE
90°
120°
360
180°
Maximum On-State Power Dissipation
(Rectangular Waveform)
900 800
120°
180°
0
CONDUCTION ANGLE
700 600
500 400 300
Max. Power D issi patio n - W a tts
200 100
0
0 100 200 300 400 500 600 700 800
30°
15°
Average On-State Current - It(av) - Amperes
90°
60°
270°
360°
180
360
140
130
120
110
100
90
80
Max. Case Temperature - Tcase -°C
70
60
0 100 200 300 400 500 600 700 800
Maximum Allowable Case Temperature
(Rectangular Waveform)
0
CONDUCTION ANGLE
15°
30°
60°
90°
120°
180°
Average On-State Current - It(av) - Amperes
180
360
360°C
270°
Revision Date: 02/16/2010
Loading...