C&H Technology EPR User Manual

6121 Baker Road,
Suite 108
Minnetonka, MN 55345

www.chtechnology.com

Phone [phone]

Fax [phone]

1-800-274-4284

Thank you for downloading this document from C&H Technology, Inc.

Please contact the C&H Technology team for the following questions -

Technical

Application

Assembly

Availability

Pricing

Phone – 1-800-274-4284

E-Mail – [e-mail]

www.chtechnology.com - SPECIALISTS IN POWER ELECTRONIC COMPONENTS AND ASSEMBLIES - www.chtechnology.com

EPR

Vishay ESTA

Document Number: 13016

Revision 04-Jan-02

www.vishay.com
10

High Voltage DC Capacitors

TYPE EPR

The EPR range of capacitors are manufactured using a
mixed dielectric material that consists of polyester
/polypropylene film and capacitor tissue. They are
impregnated and filled with a mineral oil. The container
is a robust rectangular polypropylene case. The internal
construction is designed to prevent movement when the
capacitor is subjected to mechanical shock or vibration.
An inert welding process ensures hermetic sealing.
Standard terminations are M10 threaded inserts which
eliminates the necessity for large voltage terminals. The
case has an extremely low affinity for moisture and is
resistant to virtually all electrical environments.
Brackets can be welded on as required.

Note: The impregnant used is a non toxic highly purified
and inhibited mineral oil.

APPLICATIONS

The EPR range is designed specifically for DC
applications such as filters:

• By-pass

• Coupling

• Rapid discharge

• Pulse forming networks

• Radar

• Laser

• X-ray equipment

TEMPERATURE RANGE

Temperature range is - 40°C to + 85°C. Derating is
required for operation at higher temperatures.

TEMPERATURE COEFFICIENT

Capacitance will increase by 2% per 100°C temperature
rise.

CAPACITANCE RANGE

0.002µF - 2µF. The tolerance is ± 10%. Other tolerance
are available on request. Normal values measured at
1kHz.

POWER FACTOR

The power factor is variable, and is a function of
temperature and frequency see fig.2. Nominal value
< 0.5% at 20°C

RIPPLE

The sum of the peak ripple voltage and the DC voltage
should not exceed the rated voltage. Refer to graph fig.1
for permissible peak-to-peak ripple voltage as a
percentage of rated voltage for various frequencies.

DIELECTRIC RESISTANCE

(

Parallel resistance) is indicated by the graph of
insulance (MΩ x µF) vs temperature fig.3. The insulance
(MΩ x µF) is nominally 10000s at + 20°C. (Measurements
taken after 1 minute with an applied voltage of 500V)

LIFE EXPECTANCY

EPR type capacitors are designed for a life exceptancy
of 50000 hours at 65 °C. To achieve the same life
expectancy at 85°C derate to 60% of rated voltage fig.4.

FIG 1

FIG 2

FIG 3

FIG 4

E

30

L
P
P

I
R

20

%

10

0

10 100 1000

10000

FREQUENCY Hz

at 20°C

POWER FACTOR

vs

TEMPERATURE

2%

50H

1kH

z

z

- 20

040

80

65

1%

0%

D
F

M

4

10

x
S

M
H

3

O

10

G

INSULANCE VS TEMPERATURE

E
M

10

2

TYPICAL VALUES

- 40

040

80°C

S
R
U
O

5

H

10

4

10

3

10

50

150°

100

RATED VOLTAGE