CPS
Vishay Dale
End-of-Life Vishay Dale Product
Wirewound Resistors,
Commercial Power, Radial Terminals
FEATURES
• Direct mounting on printed circuit board
• Circuit board lock-in mounting tabs
• High performance for low cost
Please reference the Vishay Dale CPR as an alternative
option (for CPR datasheet please visit our website:
http://www.vishay.com/doc?30219
.
120
100
80
STANDARD ELECTRICAL SPECIFICATIONS
GLOBAL
MODEL
CPS04 4 R10 - R99 1R0 - 1K0
CPS05 5 R10 - R99 1R0 - 2K0
CPS07 6.5 R10 - R99 1R0 - 2K7
POWER
RATING
P
70 °C
W
RESISTANCE RANGE
TCR
± 600 ppm/°C
Ω
± 5 %, ± 10 %
± 300 ppm/°C
TCR
60
RATED POWER IN %
40
20
0
- 65
Derating
50 150 250 350
70
TECHNICAL SPECIFICATIONS
PARAMETER UNIT CPS CHARACTERISTICS
Operating Temperature Range °C - 65 to + 350
Short Time Overload - 5 x rated power for 5 s
Terminal Strength lb 10 minimum
Maximum Working Voltage V (P x R)
1/2
Pb-free
Available
e3
RoHS*
COMPLIANT
AMBIENT TEMPERATURE IN °C
PERFORMANCE
TEST CONDITIONS OF TEST TEST LIMITS
Load Life 1000 h at rated power, 1.5 h “ON”, 0.5 h “OFF” ± 3.0 % ΔR average
Climatic Sequence 1000 cycles, - 55 °C to + 125 °C ± 2.0 % ΔR
Damp Heat, Steady State + 40 °C, 93 % RH, 56 days ± 2.0 % ΔR
Resistance to Solder Heat + 260 °C, 10 s ± 0.2 % ΔR typical
Low Temperature Operation - 65 °C, full rated working voltage for 45 min ± 3.0 % ΔR
GLOBAL PART NUMBER INFORMATION
Global Part Numbering Example: CPS05P100R0KE14
05P1 0R00PS KE1C 4
GLOBAL
MODEL
CPS04
CPS05
CPS07
* Pb containing terminations are not RoHS compliant, exemptions may apply
www.vishay.com For technical questions, contact: ww2aresistors@vishay.com
52 Revision: 12-Nov-08
TERMINAL VALUE TOLERANCE PACKAGING SPECIAL
P = /2 R = Decimal
K = Thousand
R1500 = 0.15 Ω
1K000 = 1000 Ω
J = ± 5.0 %
K = ± 10.0 %
E14 = Lead (Pb)-free bulk
E31 = Lead (Pb)-free four layer bulk
B14 = Tin/lead bulk
B31 = Tin/lead four layer bulk
Document Number: 21009
(Dash Number)
(up to 3 digits)
From 1 - 999 as
applicable
End-of-Life Vishay Dale Product
CPS
Commercial Power, Radial Terminals
DIMENSIONS in inches [millimeters]
0.020 [0.51]
MODEL
CPS04
CPS05
CPS07
Wirewound Resistors,
0.18 [4.57]
0.29 + 0.039
[7.37 + 1]
0.055 ± 0.005
[1.4 ± 0.12]
0.598
[15.2]
1.000
[25.4]
1.398
[35.5]
L
0.54 [14.6]
0.053 [1.35]
RM
DIMENSIONS in inches [millimeters]
LRM
0.945 ± 0.055
[24 ± 1.4]
1.350 ± 0.055
[34.3 ± 1.4]
1.752 ± 0.055
[44.5 ± 1.4]
Vishay Dale
SURFACE TEMPERATURE
100
TEMPERATURE RISE IN °C
50
CPS04/2
CPS05/2
CPS07/2
Terminal
Body hot spot
300
200
TEMPERATURE RISE IN °C
100
CPS04/2
CPS05/2
CPS07/2
0
02468
POWER IN W
CPS Terminal Temperature
Document Number: 21009 For technical questions, contact: ww2aresistors@vishay.com
Revision: 12-Nov-08 53
0
024 6 8
CPS Body Hot Spot Temperature Rise
POWER IN W
www.vishay.com
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000 www.vishay.com
Revision: 18-Jul-08 1
Loading...