6121 Baker Road,
Suite 108
Minnetonka, MN 55345
www.chtechnology.com
Phone (952) 933-6190
Fax (952) 933-6223
1-800-274-4284
Thank you for downloading this document from C&H Technology, Inc.
Please contact the C&H Technology team for the following questions -
Technical
Application
Assembly
Availability
Pricing
Phone – 1-800-274-4284
E-Mail – sales@chtechnology.com
www.chtechnology.com - SPECIALISTS IN POWER ELECTRONIC COMPONENTS AND ASSEMBLIES - www.chtechnology.com
Bulletin PD-20631 rev. B 02/03
Document Number: 93203
www.vishay.com
1
113CNQ100A SERIES
SCHOTTKY RECTIFIER
New GenIII D-61 Package
Major Ratings and Characteristics
Characteristics 113CNQ Units
I
Rectangular 110 A
F(AV)
waveform
V
RRM
I
FSM
VF@ 55 Apk, TJ = 125°C 0.67 V
TJrange - 55 to 17 5 °C
100 V
@ tp = 5 µs sine 7000 A
(per leg)
113CNQ100A 113CNQ100ASM 113CNQ100ASL
110 Amp
Description/Features
The 113CNQ100A center tap Schottky rectifier module series
has been optimized for low reverse leakage at high temperature. The proprietary barrier technology allows for reliable
operation up to 175 °C junction temperature. Typical applications are in switching power supplies, converters, free-wheeling
diodes, and reverse battery protection.
175 °C TJ operation
Center tap module
High purity, high temperature epoxy encapsulation for
enhanced mechanical strength and moisture resistance
Low forward voltage drop
High frequency operation
Guard ring for enhanced ruggedness and long term
reliability
New fully transfer-mold low profile, small
footprint, high current package
Case Styles
D61-8
D61-8-SM D61-8-SL
113CNQ100A Series
Document Number: 93203
www.vishay.com
2
Bulletin PD-20631 rev. B 02/03
Voltage Ratings
Part number 113CNQ100A
VRMax. DC Reverse Voltage (V)
V
Max. Working Peak Reverse Voltage (V)
RWM
100
Absolute Maximum Ratings
Parameters 113CNQ Units Conditions
I
Max. Average Forward (Per Leg) 55 A 50% duty cycle @ TC = 150 °C, rectangular wave form
F(AV)
Current * See Fig. 5 (Per Device) 110
I
Max. Peak One Cycle Non-Repetitive 7000 5µs Sine or 3µs Rect. pulse
FSM
Surge Current (Per Leg) * See Fig. 7 720 10ms Sine or 6ms Rect. pulse
EASNon-Repetitive Avalanche Energy 15 mJ T
(Per Leg)
A
= 25 °C, I
J
= 1 Amps, L = 30 mH
AS
IARRepetitive Avalanche Current 1 A Current decaying linearly to zero in 1 µsec
(Per Leg) Frequency limited by TJ max. VA = 1.5 x VR typical
Following any rated
load condition and with
rated V
RRM
applied
Electrical Specifications
Parameters 113CNQ Units Conditions
VFMMax. Forward Voltage Drop 0.81 V @ 55A
(Per Leg) * See Fig. 1 (1) 1.00 V @ 110A
0.66 V @ 55A
0.79 V @ 110A
IRMMax. Reverse Leakage Current 1.0 mA TJ = 25 °C
(Per Leg) * See Fig. 2 (1) 32 mA TJ = 125 °C
CTMax. Junction Capacitance(Per Leg) 1960 pF VR = 5VDC (test signal range 100Khz to 1Mhz) 25°C
LSTypical Series Inductance (Per Leg) 5.5 nH Measured lead to lead 5mm from package body
dv/dt Max. Voltage Rate of Change 10000 V/ µs
(Rated VR)
TJ = 25 °C
TJ = 125 °C
VR = rated V
(1) Pulse Width < 300µs, Duty Cycle <2%
R
Thermal-Mechanical Specifications
Parameters 113CNQ Units Conditions
TJMax. Junction Temperature Range -55 to 175 °C
T
Max. Storage Temperature Range -55 to 175 °C
stg
R
Max. Thermal Resistance Junction 0.5 °C/W DC operation * See Fig. 4
thJC
to Case (Per Leg)
R
Max. Thermal Resistance Junction 0.25 °C/W DC operation
thJC
to Case (Per Package)
R
Typical Thermal Resistance, Case 0.30 °C/W Mounting surface , smooth and greased
thCS
to Heatsink (D61-8 Only) Device flatness < 5mls
wt Approximate Weight 7.8 (0.28) g (oz.)
T Mounting Torque Min. 12 (10) (*)
(D61-8 Only) Max. 24 (20)
(*) Recommended hardware 3M stainless screw
Kg-cm
(Ibf-in)
(A)
Document Number: 93203
www.vishay.com
3
F
1000
100
113CNQ...A Series
Bulletin PD-20631 rev. B 02/03
1000
100
(mA)
10
R
0.1
Reverse Current - I
0.01
0.001
10000
Tj = 175˚C
150˚C
125˚C
100˚C
1
75˚C
0 20 40 60 80 100
Reverse Voltage - VR (V)
Fig. 2 - Typical Values Of Reverse Current
Vs. Reverse Voltage (Per Leg)
50˚C
25˚C
10
Instantaneous Forward Current - I
1
0 0.5 1 1.5 2 2.5
Forward Voltage Drop - VFM (V)
Fig. 1 - Max. Forward Voltage Drop
Characteristics (Per Leg)
1
D = 0.75
D = 0.50
(°C/W)
thJC
0.1
D = 0.33
D = 0.25
D = 0.20
0.01
Thermal Impedance - Z
0.001
0.00001 0.0001 0.001 0.01 0.1 1 10
Fig. 4 - Max. Thermal Impedance Z
Tj = 175˚C
Tj = 125˚C
Tj = 25˚C
Single Pulse
(Thermal Resistance)
t1 , Rectangular Pulse Duration (Seconds)
thJC
(p F)
T
1000
Junction Capacitance - C
Tj = 25˚C
100
0 20406080100
Reverse Voltage - VR (V)
Fig. 3 - Typical Junction Capacitance
Vs. Reverse Voltage (Per Leg)
P
DM
t
1
t
Notes:
1. Duty factor D = t 1 / t 2
2. Peak Tj = Pdm x ZthJC + Tc
Characteristics (Per Leg)
2
113CNQ100A Series
C
M
Document Number: 93203
www.vishay.com
4
Bulletin PD-20631 rev. B 02/03
180
170
160
150
140
Square wave (D = 0.50)
80% Rated Vr applied
130
see note (2)
120
Allowable Case Temperature (°C)
110
0 102030405060708090
Average Forward Current - I
Fig. 5 - Max. Allowable Case Temperature
Vs. Average Forward Current (Per Leg)
10000
(A)
FSM
1000
DC
(A)
F(AV)
At Any Rated Load Condition
And With Rated Vrrm Applied
Following Surge
60
D = 0.75
D = 0.50
50
D = 0.33
D = 0.25
D = 0.20
40
30
RMS Limit
20
Average Power Loss (Watts)
10
0
0 1020304050607080
Average Forward Current - I
Fig. 6 - Forward Power Loss Characteristics
(Per Leg)
DC
F(AV)
(A)
Non-Repetitive Surge Current - I
DUT
URRENT
ONITOR
(2) Formula used: TC = TJ - (Pd + Pd
Pd = Forward Power Loss = I
Pd
= Inverse Power Loss = VR1 x IR (1 - D); IR @ V
REV
F(AV)
100
10 100 1000 10000
Square Wave Pulse Duration - tp (microsec)
Fig. 7 - Max. Non-Repetitive Surge Current (Per Leg)
L
HIGH-SPEED
IRFP460
Rg = 25 ohm
SWITCH
FREE-WHEEL
DIODE
40HFL40S02
Fig. 8 - Unclamped Inductive Test Circuit
) x R
thJC
;
F(AV)
/ D) (see Fig. 6);
= 80% rated V
R1
R
REV
x VFM @ (I
+
Vd = 25 Volt
Outline Table
Document Number: 93203
www.vishay.com
5
113CNQ...A Series
Bulletin PD-20631 rev. B 02/03
Dimensions are in millimeters and (inches)
Outline D61-8-SM
Dimensions are in millimeters and (inches)
Outline D61-8
113CNQ100A Series
Document Number: 93203
www.vishay.com
6
Bulletin PD-20631 rev. B 02/03
Outline Table
Dimensions are in millimeters and (inches)
Outline D61-8-SL
Marking Information
THIS IS A 113CNQ100A WITH
LOT CODE 89 09
ASSEMBLED ON WW 45, 2000
IN THE ASSEMBLY LINE "A"
INTERNATIONAL
RECTIFIER
LOGO
ASSEMBLY
LOT CODE
PART NUMBER
113CNQ100A
89 09 045A
DATE CODE
YEAR 0 = 2000
WEEK 45
LINE A
113CNQ...A Series
Document Number: 93203
www.vishay.com
7
Bulletin PD-20631 rev. B 02/03
This product has been designed and qualified for Industrial Level.
Data and specifications subject to change without notice.
Qualification Standards can be found on IR's Web site.
IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105
TAC Fax: (310) 252-7309
02/03
Loading...