6121 Baker Road,
Suite 108
Minnetonka, MN 55345
www.chtechnology.com
Phone (952) 933-6190
Fax (952) 933-6223
1-800-274-4284
Thank you for downloading this document from C&H Technology, Inc.
Please contact the C&H Technology team for the following questions -
Technical
Application
Assembly
Availability
Pricing
Phone – 1-800-274-4284
E-Mail – sales@chtechnology.com
www.chtechnology.com - SPECIALISTS IN POWER ELECTRONIC COMPONENTS AND ASSEMBLIES - www.chtechnology.com
INPUT RECTIFIER DIODE
Document Number: 93486
www.vishay.com
1
Description/Features
The 10ETS.. rectifier SAFEIR series has been
optimized for very low forward voltage drop, with
moderate leakage. The glass passivation
technology used has reliable operation up to 150°C
junction temperature.
Typical applications are in input rectification and
these products are designed to be used with
International Rectifier Switches and Output
Rectifiers which are available in identical package
outlines.
Bulletin I2121 rev. C 12/01
SAFEIR Series
10ETS12, 10ETS12S
VF < 1V @ 10A
= 200A
I
FSM
V
800 to 1200V
RRM
Package Outline
TO-220AC
Major Ratings and Characteristics
Package Outline
Characteristics 10ETS.. Units
I
Sinusoidal waveform 10 A
F(AV)
V
Range 800 to 1200 V
RRM
I
FSM
VF@ 10 A, TJ = 25°C 1.1 V
T
J
200 A
- 40 to 150 °C
D2 Pak (SMD-220)
Output Current in Typical Applications
Applications Single-phase Bridge Three-phase Bridge Units
Capacitive input filter T
common heatsink of 1°C/ W
= 55°C, TJ = 125°C
A
12.0 16.0 A
10ETS.., 10ETS..S SAFEIR Series
Document Number: 93486
www.vishay.com
2
Bulletin I2121 rev. C 12/01
Voltage Ratings
V
, maximum V
RRM
Part Number
peak reverse voltage peak reverse voltage 150°C
VVmA
10ETS08, 10ETS08S 800 900 0.5
10ETS12, 10ETS12S 1200 1300
Absolute Maximum Ratings
Parameters 10ETS.. Units Conditions
I
Max. Average Forward Current 10 A @ TC = 105° C, 180° conduction half sine wave
F(AV)
I
Max. Peak One Cycle Non-Repetitive 170 10ms Sine pulse, rated V
FSM
Surge Current 200 10ms Sine pulse, no voltage reapplied
I2t Max. I2t for fusing 130 10ms Sine pulse, rated V
145 10ms Sine pulse, no voltage reapplied
2
I
√t Max. I2√t for fusing 1450 A2√s t = 0.1 to 10ms, no voltage reapplied
A
A2s
Electrical Specifications
Parameters 10ETS.. Units Conditions
VFMMax. Forward Voltage Drop 1.1 V @ 10A, TJ = 25°C
r
Forward slope resistance 20 mΩ
t
V
Threshold voltage 0.82 V
F(TO)
IRMMax. Reverse Leakage Current 0.05 TJ = 25 °C
0.50 TJ = 150 °C
TJ = 150°C
mA
, maximum non repetitive I
RSM
RRM
RRM
VR = rated V
applied
applied
RRM
RRM
Thermal-Mechanical Specifications
Parameters 10ETS.. Units Conditions
TJMax. Junction Temperature Range - 40 to 150 °C
T
Max. Storage Temperature Range - 40 to 150 °C
stg
R
Max. Thermal Resistance Junction 2.5 °C/W DC operation
thJC
to Case
R
Max. Thermal Resistance Junction 62 °C/W
thJA
to Ambient (PCB Mount)*
TsSoldering Temperature 240 °C
wt Approximate Weight 2 (0.07) g (oz.)
Case Style TO-220AC, D2Pak (SMD-220)
* When mounted on 1" square (650mm2) PCB of FR-4 or G-10 material 4 oz (140µm) copper 40°C/W
For recommended footprint and soldering techniques refer to application note #AN-994
10ETS.., 10ETS..S SAFEIR Series
Document Number: 93486
www.vishay.com
3
Bulletin I2121 rev. C 12/01
150
140
10ETS.. Series
R (D C ) = 2.5 C/W
thJC
130
120
Conduction Angle
110
100
90
80
Maximum Allowable Case Temperature ( C)
024681012
30
60
90
120
Average Forward Current (A)
Fig. 1 - Current Rating Characteristics
16
180
120
14
90
60
12
30
10
8
6
4
2
0
Maximum Average Forward Power Loss (W)
RMS Limit
Conduction Angle
10ETS.. Series
T = 150 C
J
0246810
Average Forward Current (A)
Fig. 3 - Forward Power Loss Characteristics
180
150
140
130
10ETS.. Series
R (D C ) = 2.5 C/W
thJC
Conduction Period
120
110
100
Maximum Allowable Case Temperature ( C)
30
60
90
120
90
0 2 4 6 8 10 12 14 16 18
180
Average Forward Current (A)
Fig. 2 - Current Rating Characteristics
20
DC
18
180
120
16
90
60
14
30
12
10
RMS Limit
8
6
4
2
0
Maximum Average Forward Power Loss (W)
0 2 4 6 8 10 12 14 16
Conduction Period
10ETS.. Series
T = 150 C
J
Average Fo rw a rd Current (A )
Fig. 4 - Forward Power Loss Characteristics
DC
200
At Any Rated Load Condition And With
Rated V Ap plied Fo llowing Surge.
180
160
RRM
Initial T = 150 C
J
@ 60 Hz 0.0083 s
@ 50 Hz 0.0100 s
140
120
100
80
10ETS.. Series
60
Peak Half Sine W ave Forward Current (A)
40
110100
Number Of Equal Amplitude Half Cycle Current Pulses (N)
240
Maximum Non Repetitive Surge Current
220
200
180
Versus Pu lse Train D u ra tio n .
Initial T = 150 C
No Vo ltage Re ap p lie d
Rate d V Re applied
RRM
160
140
120
100
80
10ETS.. Series
60
Peak Half Sine W ave Forward Current (A)
40
0.01 0.1 1
Pulse Train Duration (s)
J
Fig. 5 - Maximum Non-Repetitive Surge Current Fig. 6 - Maximum Non-Repetitive Surge Current
10ETS.., 10ETS..S SAFEIR Series
Document Number: 93486
www.vishay.com
4
Bulletin I2121 rev. C 12/01
100
T = 25 C
J
10
T = 150 C
J
Instantaneous Forward Current (A)
1
00.511.522.53
Instanta n eous Forw ard Volta ge (V )
10ETS.. Series
Fig. 8 - Forward Voltage Drop Characteristics
10
D = 0.50
D = 0.33
D = 0.25
thJC
D = 0.17
D = 0.08
1
Sin g le Pulse
0.1
Transient Thermal Impedance Z ( C/W)
0.0001 0.001 0.01 0.1 1 10
Square W ave Pulse Dura tion (s)
Fig. 9 - Thermal Impedance Z
Characteristics
thJC
Steady State Value
(DC Operation)
10ETS.. Series
Outline Table
C
A
Document Number: 93486
www.vishay.com
5
10ETS.., 10ETS..S SAFEIR Series
Bulletin I2121 rev. C 12/01
14.09 (0.55)
4.57 (0.18)
4.32 (0.17)
Base
Cathode
1
node
15.24 (0.60)
14.84 (0.58)
13.47 (0.53)
1.40 (0.05)
1.15 (0.04)
15.49 (0.61)
14.73 (0.58)
2
3X
3
Anode
10.54 (0.41)
MAX.
2
1
3
3
1
93°
1.40 (0.055)
1.14 (0.045)
3.78 (0.15)
3.54 (0.14)
2.92 (0.11)
2.54 (0.10)
TERM 2
3.96 (0.16)
3.55 (0.14)
2.04 (0.080) MAX.
0.94 (0.04)
0.69 (0.03)
5.08 (0.20) REF.
10.16 (0.40)
REF.
8.89 (0.35)
13
2
DIA.
0.61 (0.02) MAX.
6.47 (0.25)
6.18 (0.24)
2.61 (0.10)
2.32 (0.09)
REF.
0.93 (0.37)
2X
0.69 (0.27)
4.57 (0.18)
4.32 (0.17)
0.61 (0.02) MAX.
5.08 (0.20) REF.
6.48 (0.25)
6.23 (0.24)
1.32 (0.05)
1.22 (0.05)
2°
0.10 (0.004)
1
2.89 (0.11)
2.64 (0.10)
athode
TO-220AC
Dimensions in millimeters (inches)
4.69 (0.18)
4.20 (0.16)
1.32 (0.05)
1.22 (0.05)
5.28 (0.21)
4.78 (0.19)
0.55 (0.02)
0.46 (0.02)
MINIMUM RECOMMENDED FOOTPRINT
11.43 (0.45)
8.89 (0.35)
17.78 (0.70)
3.81 (0.15)
Base
Cathode
2
3
Anode
D2Pak (SMD-220)
Dimensions in millimeters and inches
2.08 (0.08)
2X
2.54 (0.10)
2X
10ETS.., 10ETS..S SAFEIR Series
Document Number: 93486
www.vishay.com
6
Bulletin I2121 rev. C 12/01
Marking Information
EXAMPLE: THIS IS AN 10ETS12S
INTERNATIONAL
RECTIFIER LOGO
ASSEMBLY
LOT CODE
Tape & Reel Information
TRR
1.60 (0.063)
1.50 (0.059)
FEED DIRECTION
TRL
4.10 (0. 161)
3.90 (0. 153)
1.8 5 (0.0 73 )
1.6 5 (0.0 65 )
10 .90 (0 .4 29)
10 .70 (0 .4 21)
(K)
10ETS12S
9G3A
(A)
16 .10 (0.6 34)
15 .90 (0.6 26)
9512
(A)
1.60 (0.063)
1.50 (0.059)
11 .60 (0.45 7)
11 .40 (0.44 9)
1.75 (0.069)
1.25 (0.049)
PART NUMBER
DATE CODE (YYWW)
YY = YEAR
WW = WEEK
DIA.
15.42 (0.609)
15.22 (0.601)
DIA.
0.368 (0.0145)
0.342 (0.0135)
24 .30 (0.95 7)
23 .90 (0.94 1)
4.7 2 (0.1 86)
4.5 2 (0.1 78)
FEED DIRECTION
360 (14.173)
DIA. MAX.
13.50 ( 0.532)
12.80 ( 0.504)
DIA.
Dimensions in millimeters and inches
26 .40 (1 .03 9)
24 .40 (0 .96 1)
60 (2 .36 2)
DIA. MIN.
SMD-2 20 Tape & R eel
When order ing, indicate th e part
number, part orientati on, and th e
quantity. Quantitie s are in multiples
of 8 00 piec es per re el fo r both
TRL a nd TRR.
Ordering Information Table
Document Number: 93486
www.vishay.com
7
Device Code
1 - Current Rating
2 - Circuit Configuration
3 - Package
4 - Type of Silicon
5 - Voltage code: Code x 100 = V
6 - S = TO-220 D2Pak (SMD-220) Version
7 - Tape and Reel Option
10ETS.., 10ETS..S SAFEIR Series
10 E T S 12 S TRL
524
1
3
E = Single Diode
T = TO-220AC
S = Standard Recovery Rectifier
TRL = Left Reel
TRR = Right Orientation Reel
6
7
RRM
Bulletin I2121 rev. C 12/01
08 = 800V
12 = 1200V
This product has been designed and qualified for Industrial Level.
Data and specifications subject to change without notice.
Qualification Standards can be found on IR's Web site.
IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105
TAC Fax: (310) 252-7309
11/01
Loading...