CH Tech VX415C User Manual

C&H Technologies, Inc. • 445 Round Rock West Drive • Round Rock, TX 78681-5012

[phone] • FAX [phone] • www.chtech.com

Insulation Resistance
(between any two points):

>5 x 109Ω

Relay Life (operations):

Low Level 10

9

Rated load 5 x 10

7

Relay Operate Time:

1.5 msec close (typical)
1 ms open (typical)

Power Up/Down States:

Contact is open.

Power: +5V @ 1.5A typical

+12V @ 0.5A typical

Ordering Information:

Description Part Number

VX415C 11027565-0001

VXIbus Compliance

Complies with ANSI/IEEE Std. 1014­1987 and VXIbus Rev 1.4

A16:D16 DTB Slave

No SYSFAIL

No Interrupts

IACKIN tied to IACKOUT

BRX tied to BGX

Form Factor: Size C

Built-in test via register feedback

Applications

• Power Switching

• Control

• LF Signal Switching

Specifications:

Maximum Input Voltage:

Terminal to Terminal:

250 Vdc or ac

rms

Terminal to Chassis:

250 Vdc or ac

rms

Maximum Switchable Voltage:

250 Vdc, or ac

rms

Maximum Switchable Current:
(DC or AC

rms

):

Per Contact: 2A
Per Module: 25A

Maximum Switchable Power:

Per Channel: 50W
Per Module: 625W

Closed Channel Resistance:

>100 mA: <0.085 Ω
(relay plus connectors)

VX415C
24 Channel
1x4 Multiplexer
Module

The VX415C is a C-size, Register
based switching card that provides
24 channels of 1x4 multiplexer with
Mercury wetted 2A relays. User
connections to the module is
through two (2) AMP HD-22 78
position receptacle type connectors.
MODID and Board Select indicators
are included. Module is equipped
with BIT capability and shielding.