Page 1
C&H Technologies, Inc. • 445 Round Rock West Drive • Round Rock, TX 78681-5012
(512) 733-2621 • FAX (512) 733-2629 • www.chtech.com
Bit Addressing Options:
Two 8 bit ports, 1 16 bit,
Or individual bits
Connectors: 44 pin DSUB
(Female)
Temperature:
Operating: 0°C to 55°C
Storage: -40°C to 75°C
Power: +5V @ 0.385 A
M Module Compliance
Complies with ANSI/VITA Std 121996 for single-wide M Modules.
Data Transfers 16 bit
Interrupts INTC
Compatible with VXI, VME, PCI,
PXI, CPCI & Ethernet Carriers
Applications
• Control of external relays
• Monitoring of digital events
Ordering Information
Part Number 11029580-0001
Additional Information
User Manuals for C&H carriers and
this module can be found on our
website at www.chtech.com.
Specifications:
Output Characteristics:
I
out
(High): 20mA (source)
I
out
(Low): 200 mA (sink)
V
out
(High): 2.9V (TTL); 30V (OC)
V
out
(Low): 0.4V
Input Characteristics:
Iin (High): n/a
Iin (Low): n/a
Vin (High): 1.8V
Vin (Low): 0.8V
Input De-bounce Control:
Input Register: none or 3 ms
Pattern Register: Fixed at 3 ms
M223
16 Bit Digital I/O
M Module
The M223 (formerly Agilent
E2290A) provides 16 data/actuator
lines. These data lines offer TTL
compatible inputs and open drain
outputs up to 30 volts. Each I/O line
also provides active pull-up and pulldown for actuating external devices
such as relays or attenuators. The
module also has the ability to
generate an interrupt based upon
matching of a pre-stored pattern in a
Compare Register. De-bounce on
inputs is available.
Loading...