Uconnect® 8.4A/8.4AN
Owner’s Manual Supplement
SECTION PAGE
IDENTIFYING YOUR RADIO ....................................................3
1
ALL ABOUT UCONNECT® ACCESS ..............................................7
2
UCONNECT® 8.4A — IF EQUIPPED .............................................171
3
UCONNECT® 8.4AN — IF EQUIPPED ...........................................289
4
UCONNECT® 8.4A/8.4AN VOICE RECOGNITION QUICK TIPS .......................407
5
SAFETY GUIDELINES ........................................................423
6
TABLE OF CONTENTS
1
2
3
4
5
6
IDENTIFYING YOUR RADIO
CONTENTS
䡵 IDENTIFYING YOUR RADIO................4 ▫ Key Features ..........................4
1
4 IDENTIFYING YOUR RADIO
IDENTIFYING YOUR RADIO
Uconnect® 8.4A/8.4AN
Key Features
The 8.4A and 8.4AN share some features between them,
but the 8.4AN has some features that sets it apart. The
below features are shared between them:
• 8.4” Touchscreen
• Hands-free/Bluetooth®
• USB port, AUX port and SD Card slot — If Equipped
• Touchscreen Climate Controls
• SiriusXM Satellite Radio with 1yr Trial Included — If
Equipped
• Uconnect® Access — U.S. Market Only — If Equipped
The 8.4AN sets itself apart by offering these unique
features:
• HD Radio — U.S. Market Only
• Navigation Standard
• One-shot destination entry
• 3D content (Select this option and zoom to an appro-
priate level. Not all tall buildings are in 3D)
• Enhanced Digital Terrain Model (DTM)
• SiriusXM Traffic with five (5) year Trial Included —
U.S. Market Only — If Equipped
• SiriusXM Travel Link with five (5) year Trial Included
— U.S. Market Only — If Equipped
IDENTIFYING YOUR RADIO 5
NOTE: 3D Landmarks are visible at 250ft and below, 3D
City Models are visible at 50ft and below and Digital
Terrain is visible at 100mi and below.
1
ALL ABOUT Uconnect® ACCESS
CONTENTS
䡵 INTRODUCTION TO Uconnect® ACCESS ......9
▫ What Is Uconnect® Access? ................9
▫ Included Trial Period For New Vehicles .......13
▫ Features And Packages ..................15
䡵 GETTING STARTED WITH Uconnect® ACCESS . .15
▫ Registration ..........................15
▫ Set Up Your Uconnect® Payment Account .....23
▫ Download the Uconnect® Access App .......26
▫ Set up Via Mobile ......................32
2
▫ Purchasing Apps And WiFi Hotspot For Your
Vehicle ..............................36
▫ Using Mopar Owner Connect..............43
䡵 USING Uconnect® ACCESS ................47
▫ Getting Started With Apps ................47
▫ 9-1-1 Call ............................48
▫ Roadside Assistance Call .................53
▫ Yelp®...............................56
▫ Theft Alarm Notification .................66
▫ Stolen Vehicle Assistance .................69
8 ALL ABOUT Uconnect® ACCESS
▫ WiFi Hotspot .........................72
▫ SRT Performance Pages/SRT Performance Pages
Plus ................................80
▫ Voice Texting .........................93
▫ Remote Door Lock/Unlock...............103
▫ Remote Vehicle Start ...................108
▫ Remote Horn And Lights ................114
▫ Via Mobile Apps ......................120
䡵 MAINTAIN MY Uconnect® ACCESS
ACCOUNT ...........................154
▫ Reinstalling An App ...................154
▫ How To Remove My Uconnect® Access
Account ............................157
▫ Adding Vehicles To My Uconnect® Access
Account ............................160
䡵 Uconnect® CARE & FAQs .................160
▫ Uconnect® Care Business Hours:...........160
▫ Safety Guidelines ......................166
▫ Safe Usage Of The Uconnect® Access System . .166
䡵 DEVICE CONNECTION AND AUDIO TIPS WITH
Uconnect® ............................169
INTRODUCTION TO Uconnect® ACCESS
To unlock the full potential of Uconnect® Access in your
vehicle, you first need to register with Uconnect® Access.
What Is Uconnect® Access?
Uconnect® Access enhances your ownership and driving
experience by connecting your vehicle with a 3G cellular
connection. Uconnect® Access is available only on
equipped vehicles purchased within the continental
United States, Alaska and Hawaii. Services can only be
used where coverage is available, see coverage map for
details.
For a complete list of Uconnect® Access services, please
DriveUconnect.com
visit:
.
ALL ABOUT Uconnect® ACCESS 9
Uconnect® Access provides:
• The ability to remotely lock/unlock your doors and
start your vehicle (if equipped) from virtually anywhere, with the Uconnect® Access App, the Mopar
Owner Connect website (
and Uconnect® Care.
• The functionality to turn your vehicle into a WiFi
Hotspot on demand.
• Theft Alarm Notification via text or email.
• Yelp® to help find great places, businesses and other
locations when you need them.
• Voice Texting so you can compose, send and receive
text messages with your voice while keeping your
hands on the wheel.
Before you drive, familiarize yourself with the easy-touse Uconnect® System.
moparownerconnect.com
2
)
10 ALL ABOUT Uconnect® ACCESS
1. The ASSIST And 9-1-1 Buttons On Your Rearview
Mirror
The ASSIST Button is used for contacting Roadside
Assistance, Vehicle Care and Uconnect® Care. The 9-1-1
button connects you directly to emergency services.
2. The Uconnect® “Apps” Button On The Menu Bar At
The Bottom Right Corner Of The In-Vehicle Touchscreen
This is where you can begin registration for
Uconnect® Access, find the apps and purchase WiFi
Hotspot on demand.
3. The Uconnect® Voice Command And Uconnect®
Phone Buttons On Your Steering Wheel
The buttons let you use your voice to give commands,
make phone calls, send and receive text messages
hands-free, enter navigation destinations and control
your radio and media devices.
1 — Voice Recognition Button
2 — Phone Button
WARNING!
ALWAYS drive safely with your hands on the
steering wheel. You have full responsibility and
assume all risks related to the use of the
Uconnect® features and applications in this vehicle. Only use Uconnect® when it is safe to do so.
Failure to do so may result in an accident involving serious injury or death.
ALL ABOUT Uconnect® ACCESS 11
2
12 ALL ABOUT Uconnect® ACCESS
1 — Steering Wheel Audio Controls (Left Rear Surface of Steering
Wheel)
2 — Uconnect® Voice Command Button
3 — Uconnect® Phone Button
4 — Assist Button
5 — 9-1-1 Button
6 — Uconnect® Access 8.4AN Radio
7 — Tune or Scroll Knob/Browse or Enter Button
8 — Remote Disc Player (If Equipped)
9 — Media Hub-may include USB port, SD Card and Audio Jack
(Inside Center Console)
10 — Steering Wheel Audio Controls (Right Rear Surface of Steering Wheel)
11 — Volume/Mute Button
NOTE: Dodge Ram 1500 interior shown, your vehicle may vary.
ALL ABOUT Uconnect® ACCESS 13
Included Trial Period For New Vehicles
Your new vehicle may come with an included trial period
for use of the Uconnect® Access Services starting at the
date of vehicle purchase*. To activate the trial, you must
first register with Uconnect® Access. Once registered,
Uconnect® Access customers can purchase additional
services and Apps over the lifetime of their vehicle
ownership.
Included Trial on New Vehicles ONLY
Radio Uconnect® 8.4A Uconnect® 8.4AN
Radio Sales Code RA3 RA4
Trial Period Six months of the Advantage Package 12 months of the Advantage Pack-
* Select 2014 and 2015 Model Year New Vehicle market
2
age
14 ALL ABOUT Uconnect® ACCESS
There are a few quick ways for you to identify your radio.
For a more complete description, please refer to the User
Guide in your glove box or visit
DriveUconnect.com
.
• Both the Uconnect® 8.4A and Uconnect® 8.4AN feature a large 8.4 inch full color touchscreen.
• Only the Uconnect® 8.4AN will have the HD Radio
icon when listening to FM or AM stations. The icon
will be lit when it is receiving an HD Radio signal (not
all stations currently broadcast an HD Radio signal).
Features And Packages
After the trial period, you can subscribe to continue your
service by visiting the Uconnect® Store located within
the Mopar Owner Connect website
moparownerconnect.com
(
can also call Uconnect® Care at 855-792-4241. For the
latest information on packages and pricing information,
DriveUconnect.com
visit
GETTING STARTED WITH Uconnect® ACCESS
Registration
To unlock the full potential of Uconnect® Access in your
vehicle, you first need to register with Uconnect® Access.
1. From the parked vehicle with the radio touchscreen
powered on, press the “Apps” button located near the
bottom right-hand corner of the radio touchscreen.
). If you need assistance, you
.
ALL ABOUT Uconnect® ACCESS 15
NOTE: Should you require assistance anytime during the
registration process, call Uconnect® Care at
1-855-792-4241.
2
16 ALL ABOUT Uconnect® ACCESS
2. Press “Register” on the reminder screen or select the
“Uconnect® Registration” button on the touchscreen
which appears in the “Favorites Tab” on the Apps list.
3. The Uconnect® Access Registration App will open
and display step-by-step instructions to start your
registration.
ALL ABOUT Uconnect® ACCESS 17
4. Enter your email address into the radio touchscreen. 5. This message will display on the touchscreen indicating your email submission was accepted. In a few
minutes, you will receive an email which will allow
you to register your vehicle for Uconnect® Access. You
should open this email and begin your Uconnect®
Access registration within 72 hours.
1 — Press To Enter Email Address
2 — Press To Re-enter Email Address
3 — Press To Send
2
18 ALL ABOUT Uconnect® ACCESS
6. Check for an email from Uconnect® Access that con-
tains your personalized registration link. If you don’t
see it, check your spam or junk mail folder. Open the
email and click on the link to continue registering.
NOTE: For security reasons, this link is valid for 72 hours
from the time you submitted your email address into the
radio touchscreen. If the link has expired, simply re-enter
your email address into the Uconnect® Registration App
on the radio touchscreen to receive another link. The
secured registration link will take you through the
Uconnect® Access registration process step by step.
ALL ABOUT Uconnect® ACCESS 19
2
20 ALL ABOUT Uconnect® ACCESS
For additional registration assistance while in the vehicle,
turn the ignition on and push the ASSIST button to
contact Uconnect® Care.
7. To unlock the full potential of Uconnect® Access in
your vehicle, you will need to create or validate an
existing Mopar Owner Connect account (previously
Owner Center). Uconnect® along with Mopar Owner
Connect have joined forces to create one destination to
manage all of your vehicle needs — from managing
your Uconnect® Access account to tracking service
history and finding recommended accessories for your
vehicle. If you already have a Mopar Owner Connect
account, log in to the website with your existing
username and password. For assistance with this web
based registration process, call Uconnect® Care at
1-855-792-4241.
ALL ABOUT Uconnect® ACCESS 21
2
22 ALL ABOUT Uconnect® ACCESS
8. Once you are logged in to your Mopar Owner Connect
account, you will create a personal Uconnect® Security PIN. The Uconnect Security PIN will be required
to authenticate you when accessing your account via
Uconnect® Care or performing any remote services
such as Remote Door Lock/Unlock, Remote Horn &
Lights, or Remote Vehicle Start.
9. If your vehicle qualifies for a trial package it will be
presented. Simply agree to the Uconnect® Terms of
Service (checkbox) and then select the “Start Service”
button.
At this point your vehicle is registered with
Uconnect® Access. Apps will be downloaded the next
time you start your vehicle. If the Apps have not
appeared after 24 hours, please contact Uconnect®
Care. The recommended next steps are to:
• Download the Uconnect® Access App (allows you to
utilize services such as Remote Door Unlock and Via
Mobile).
• Set up your Uconnect® Payment Account (provides
the option to purchase WiFi Hotspot and renew your
subscription).
• Set up your Via Mobile profile on Mopar Owner
Connect website (if equipped).
Set Up Your Uconnect® Payment Account
Setting up your Uconnect® Payment Account allows you
to make purchases from your vehicle (such as WiFi
Hotspot) and can be used to ensure uninterrupted service
at the end of the included trial period. Your Uconnect®
Payment Account is optional, but we recommend it so
that you can enjoy the full benefits of the system.
Setting up your Uconnect® Payment Account during
registration
1. Setting up your Uconnect® Access Payment Account
is completely optional. After you have selected a
package and accepted the Terms of Service, you will
ALL ABOUT Uconnect® ACCESS 23
be asked to set up your Uconnect® Payment Account
as an optional step. Please enter the required information, and then click on the Create Uconnect® Payment
Account button. As part of this step, you will have
created a Uconnect® Payment PIN which you will use
anytime you make purchases in the Uconnect® Store.
2
24 ALL ABOUT Uconnect® ACCESS
Setting up AFTER registration and Managing your
Uconnect® Payment Account
If you didn’t set up your Uconnect® Payment Account
when you registered, or you want to make changes later
on, just go to
moparownerconnect.com
to manage your
account.
1. Log In to Mopar Owner Connect with your
username/email and password.
2. In the upper-right corner of the screen, click on the
“Edit Profile” button.
3. On the left side of the next screen, click on the tab
called “Uconnect® Payment Account”. It will take you
to a page where you can manage your payment
options, including:
• Adding or editing your credit card information for
payment
• Editing your billing address
• Reviewing your current subscriptions to packages
and Apps
• Changing your Uconnect® Payment PIN, or your
Security Question
• Viewing transaction history of purchases from the
Uconnect® Store
ALL ABOUT Uconnect® ACCESS 25
2
26 ALL ABOUT Uconnect® ACCESS
Download the Uconnect® Access App
The Uconnect® Access smartphone app allows you to
remotely lock or unlock your doors, start your engine (if
equipped) and activate your horn and lights from virtually anywhere. The smartphone app also features Via
Mobile (if equipped) which uses your smartphone’s data
plan to access your personal Pandora®, iHeartRadio,
Slacker Radio and Aha™ accounts and control them
using your vehicle touchscreen.
The Uconnect® Access app is only compatible with select
iPhone® and Android smartphones. Visit
UconnectPhone.com
compatible with Uconnect®.
to confirm that your smartphone is
ALL ABOUT Uconnect® ACCESS 27
2
Once you’ve confirmed your smartphone is compatible,
Android and iPhone® users should visit their respective
app store and search for “Uconnect® Access”.
28 ALL ABOUT Uconnect® ACCESS
Why do I need the Uconnect® Access App?
Unlike your key fob, the Uconnect® Access app on your
smartphone can send commands to your vehicle from
any distance so long as your phone and vehicle are both
in cellular range. The Uconnect® Security PIN that was
set up during registration is required for remote services.
• Lock or unlock your car doors from virtually any
location
• Start your car to warm it up, or cool it down, before
you get inside
• Sound your horn and flash your lights to find your
vehicle in a crowded parking lot
• Contact Customer Care or Roadside Assistance with
the push of a button on your smartphone
• Use Via Mobile to access your personal Pandora®,
iHeartRadio, Slacker Radio and Aha™ from the vehicle and control them using your vehicle touchscreen
ALL ABOUT Uconnect® ACCESS 29
2
30 ALL ABOUT Uconnect® ACCESS
To download the app to your smartphone, go to your
respective app store and search for “Uconnect® Access”
(there is no charge to download and install the app to
your smartphone).
Requirements
• Vehicle must be properly equipped with the
Uconnect® Access System
• Your smartphone must be compatible with the
Uconnect® Access App
• Vehicle must be in range of a usable and authorized
cellular signal
• Your smartphone sending the command must be in
cellular range to send the command
• Vehicle must be registered with Uconnect® Access and
have an active subscription that includes the applicable feature or App
• Owner must have a compatible smartphone and
download the Uconnect® Access App
• The vehicle must be properly equipped with factoryinstalled features that enable remote commands. (i.e.
Remote Door Lock/Unlock, Remote Start/Stop and
Remote Horns and Lights)
• Vehicle must be in the 48 contiguous states and Alaska,
where cellular coverage is available
FAQs
1. How much does the Uconnect® Access App cost?
Uconnect® does not charge for the App, however to
utilize the Remote Services (e.g., Remote Door Lock/
Unlock) a subscription or trial is required to the
Advantage Package.
2. Will my vehicle be safe if I lose my smartphone?
People sometimes lose their phone, which is why
security measures have been engineered into the
Uconnect® Access App. Asking for your username/
email, password and Uconnect® Security PIN help to
ensure that nobody can get into your vehicle if they
happen to find your smartphone.
ALL ABOUT Uconnect® ACCESS 31
3. Why can’t all phones use the Uconnect® Access
App? The Uconnect® Access App has been designed
to work on most smartphones with the Apple and
Android operating systems. Visit
UconnectPhone.com
phone is compatible with Uconnect®.
4. How do I know how much data is being used when
I’m using Via Mobile? Uconnect® Access Via Mobile
uses your smartphone’s existing data plan to stream
content. Data usage varies by phone/device, content
(e.g. videos), high quality audio and several other
factors. Please refer to your device carrier for specific
details.
to confirm that your smart-
2
32 ALL ABOUT Uconnect® ACCESS
Set up Via Mobile
After registration, link your app accounts to your Via
Mobile Profile on Mopar Owner Connect. If you already
have an account with these apps, click “set up” to enter
your information. If you do not have an account, you can
create one.
NOTE: If you’ve already registered with Uconnect®
Access, but have not set up your Via Mobile apps, you
can come back to this page at any time by logging in to
moparownerconnect.com
. Click on “Via Mobile Pro-
file”.
Determine if Your Vehicle is Via Mobile-enabled
To see if your Uconnect® 8.4A or 8.4AN system is
equipped with Via Mobile Apps, press the “Apps” button
on the touchscreen, then press the “All Apps” button on
the left side of the touchscreen. If you see Aha™, iHeartRadio, Pandora® or Slacker Radio then your system is
capable of playing Via Mobile Apps (registration required).
Earlier vehicles with Uconnect® 8.4A or 8.4AN may
qualify for a software upgrade to enable Via Mobile
Apps. You can call Uconnect® Care at 855-792-4241 or
DriveUconnect.com/features/via-mobile/
visit
.
• Click on Help & Support > Select your Brand > System
Updates
Using Via Mobile
Launch the Uconnect® Access app on your connected
smartphone and log in with your Mopar Owner Connect
Username/Email and password. From the vehicle touchscreen select an app from the apps list. To launch an app
using voice recognition, press the button on the steering
wheel and say, “launch app name Via Mobile”.
Connect Smartphone to the Vehicle Touchscreen
The Uconnect® Access app is compatible with select
iPhone® and Android smartphones. Visit
UconnectPhone.com
compatible with Uconnect®. Once you’ve confirmed
your smartphone is compatible, pair it to Uconnect®
using the Bluetooth (BT) Hands Free Profile to use Via
Mobile apps.
to confirm that your smartphone is
ALL ABOUT Uconnect® ACCESS 33
NOTE: When connecting multiple devices, Via Mobile
audio will stream using the BT Hands Free Profile, not
the Media (A2DP) profile. If using an iPhone®, a USB
cable may also be used for the data connection.
Data Usage
Uconnect® Access Via Mobile uses your smartphone’s
existing data plan to stream content. Data usage varies by
phone/device, content, high quality audio and several
other factors. Please refer to your device carrier for
specific details.
2
34 ALL ABOUT Uconnect® ACCESS
Connection Status
The Via Mobile button provides a status indication of the
smartphone connection for Via Mobile app use. Under
“Settings” in the Uconnect® Access app on your smartphone, confirm that Via Mobile data has been turned on.
• Green indicates the data connection is ready
• Blue indicates the data connection is established
• Yellow indicates a Bluetooth connection error
• Red indicates a user account problem or network
connection error
ALL ABOUT Uconnect® ACCESS 35
2
36 ALL ABOUT Uconnect® ACCESS
Purchasing Apps And WiFi Hotspot For Your Vehicle
Apps and WiFi Hotspot can be purchased from the
Uconnect® Store from within your vehicle, and online at
the Mopar Owner Connect website
moparownerconnect.com
. You must first register and
set up a Uconnect® Payment account.
Purchasing Apps And WiFi Hotspot From Within Your
Vehicle:
1. With the vehicle parked and the radio powered on,
press the “Apps” button located near the bottom
right-hand corner of the radio touchscreen.
2. To launch the Uconnect® Store, select Apps > All Apps
> Uconnect® Store.
ALL ABOUT Uconnect® ACCESS 37
3. From the Uconnect® Store, select the service you wish
to purchase.
2
38 ALL ABOUT Uconnect® ACCESS
4. This will launch the selected service or package into
purchase mode along with providing additional information. The purchase process begins when you press
the “Buy” button on the touchscreen.
5. The Uconnect® Store will display a “Purchase Overview” message confirming the financial details for the
App you are about to purchase. Press the “Purchase”
button on the touchscreen to continue.
6. The User must select “AGREE” to complete the purchase. “DISAGREE” will cancel the purchase and
re-direct customers back to the Uconnect® Store landing page.
ALL ABOUT Uconnect® ACCESS 39
7. The Uconnect® Store will ask you to “Confirm Payment” using your default payment method on file in
your Uconnect® Payment Account. Press the “Complete” button on the touchscreen to continue.
2
40 ALL ABOUT Uconnect® ACCESS
8. The Uconnect® Payment Account will then ask for
your “Payment PIN.” After entering this four digit
PIN, press the “Continue” button on the touchscreen
to make the purchase.
9. You will receive a confirmation message that your
purchase has been submitted. Press “OK” to end the
process.
NOTE: Purchased Apps and services can take up to 30
minutes to download, depending on your vehicle’s cellular coverage at time of purchase. If your download
takes more than 30 minutes, please contact Uconnect®
Care by pushing the ASSIST button on the rear view
mirror.
Purchasing Apps Online From Mopar Owner Connect
Website
You can also purchase Apps or renew your subscription
to a package from the Mopar Owner Connect website.
Log In to the Mopar Owner Connect website
moparownerconnect.com
and password, and click on the “Store” tab.
1. Log In to Mopar Owner Connect with your
username/email and password.
2. Click on the tab that says “Shop.”
with your username/email
ALL ABOUT Uconnect® ACCESS 41
2
42 ALL ABOUT Uconnect® ACCESS
3. Click on the link to the Uconnect® Store. 4. You can now browse through the various packages,
features and Apps available for your vehicle. Look
through your options, read the details, and if you find
something you want for your vehicle click on the
“Purchase” button.
Using Mopar Owner Connect
The Mopar Owner Connect website
moparownerconnect.com
information you need, all in one place. You can track your
service history, find recommended accessories for your
vehicle, watch videos about your vehicle’s features, and
easily access your user guides and manuals. It is also
where you can manage your Uconnect® Access account.
This section will familiarize you with the key elements of
the website that will help you get the most of your
Uconnect® Access system.
provides you with all the
ALL ABOUT Uconnect® ACCESS 43
2
1. Your Vehicle(s):
Images are placed here to represent the Chrysler
Group vehicles (Chrysler, Jeep, Dodge, Ram, SRT and
FIAT) you own. If a vehicle you own is not shown
here, click on the “Add New Vehicle” button. Likewise, if a vehicle is shown that you no longer own
click on the “Edit Profile” to manage your account.
44 ALL ABOUT Uconnect® ACCESS
2. Edit Profile:
To manage the details of your Uconnect® Access
account, such as your contact information, password
and PIN, click on the “Edit Profile” button to access
the details of your account.
3. Shop:
To purchase a WiFi hotspot and renew your subscription to a package, click on the “Shop” tab, then go to
the Uconnect® Store to make your purchase.
5. Remote Services:
For vehicles with an active Uconnect Access subscription, press one of these icons and enter your four-digit
Uconnect® Security PIN to command your vehicle to
remotely start, lock/unlock doors or sound the horn
and lights.
6. Subscription Status:
Refer to this section to quickly see if you are currently
subscribed to remote services.
4. Connected Vehicle:
This statement will indicate which vehicle’s you own
that are equipped with the Uconnect® Access system.
Other vehicles you own may not have Uconnect®
Access and will indicate that it is a non-Uconnect®
Access Vehicle.
7. Uconnect® Access App:
This is where you can enter the mobile phone number
for your compatible smartphone to download the
Uconnect® Access App. Phone compatibility can be
verified at
UconnectPhone.com
. For more details, see
the section labeled Download the Uconnect® Access
App.
8. Learn & Use:
Click on the “Learn & Use” tab to find user guides and
other information about your vehicle. More specifically, there is a dedicated Uconnect® Access tab in this
section to learn all about your connected vehicle
capabilities.
Editing Your Notifications
Notifications are an important element of your
Uconnect® Access Account. For example, any time you
use your remote services (such as Remote Door Unlock),
or if your theft alarm is set off, you can elect to receive a
text message and/or email to notify you of the event. To
set up the notifications, please follow these instructions.
NOTE: Standard text message rates apply.
ALL ABOUT Uconnect® ACCESS 45
To get the Uconnect Access App from the Mopar Owner
Connect website:
1. Log on to
username/email and password you used when registering your Uconnect® Access system.
NOTE: If you forgot your username or password, links
are provided on the website to help you retrieve them.
2. Once logged in you will find yourself on the Dashboard. Click the “Edit Profile” button in the upperright corner of the page.
3. Click the Uconnect® Notifications tab on the left side
of the page.
4. If you have more than one vehicle with Uconnect®
Access, please select which vehicle you want to manage notifications for using the drop down menu.
moparownerconnect.com
using the
2
46 ALL ABOUT Uconnect® ACCESS
5. You can enter up to five mobile phone and/or email
addresses to your notifications, and you can customize
which ones receive the types of messages.
6. If you add a mobile phone number, you will receive a
confirmation text message asking to confirm and
receive vehicle notifications. If you are OK with this,
reply to the text message saying “yes” (message and
data rates may apply, please see your mobile phone
provider for details). If you have questions, text
“HELP” in your reply.
USING Uconnect® ACCESS
Getting Started With Apps
Applications (Apps for short) in your Uconnect® Access
system are designed to deliver the features and services
that you want. There are two basic categories:
• Built-In Apps — uses the built-in Cellular Network on
your Uconnect® 8.4A or 8.4AN radio.
• Uconnect® Access via Mobile (if equipped) — uses
the Uconnect® Access app and your smartphone’s
data plan to access your personal Pandora®, iHeartRadio, Aha™ and Slacker accounts from the vehicle
and control them using the vehicle touchscreen. Customer’s data plan charges will apply.
ALL ABOUT Uconnect® ACCESS 47
Get started with your Uconnect® Access Apps by pressing the Uconnect® “Apps” button on the menu bar at the
bottom right corner of the in-vehicle touchscreen. Available Apps and features are organized by the tabs on the
left of the screen.
• Favorite Apps — this is the default screen when you
first press the “Apps” button on the touchscreen, and
is a good place to put the Apps you use most frequently. To make an App a “favorite,” press the
“Settings” button on the touchscreen to the right of the
App and select “Make a favorite.”
• All Apps — all of your available Apps will reside in
the “All Apps” folder.
• Running Apps — press this tab to see which Apps are
currently running.
NOTE: Most Uconnect® Access features do not require
that you have a compatible Smartphone. The Uconnect®
2
48 ALL ABOUT Uconnect® ACCESS
Access features work using the built-in cellular connection. Only Voice Texting the Uconnect® Access App and
Via Mobile Apps require a compatible smartphone to
work with your Uconnect® Access system.
9-1-1 Call
Access To Emergency Services At The Push Of A Button
Uconnect® Access In-Vehicle Assistance Features
With Uconnect® Access, your vehicle has on-board assistance features located on the rear view mirror designed to
enhance your driving experience if you should ever need
assistance or support.
Description
9-1-1 Call is a feature that, at the push of a button, can
contact emergency services. It’s a convenient way to get
in contact with a 9-1-1 operator in the event of an
emergency. When the connection between the vehicle
and a 9-1-1 operator is made, your vehicle will automatically transmit location information to the 9-1-1 operator.
How It Works
1. Push the “9-1-1” Call button on the Rearview Mirror;
the indicator light will turn green indicating a call has
been placed.
NOTE: In case the “9-1-1” Call button is accidentally
pushed, there is a 10 second delay before the 9-1-1 call is
placed. The system will verbally alert you that a call is
about to be made. To cancel the 9-1-1 Call connection,
push the “9-1-1” Call button on the Rearview Mirror or
press the “Cancellation” button on the Phone Screen.
2. Once a connection between the vehicle and a 9-1-1
operator is made, the 9-1-1 Call system will transmit
the following important vehicle information to a 9-1-1
operator:
• Indication that the occupant placed a 9-1-1 Call.
• The vehicle brand.
• The last known GPS coordinates of the vehicle.
3. You should be able to speak with the 9-1-1 operator
through the vehicle audio system to determine if
additional help is needed.
ALL ABOUT Uconnect® ACCESS 49
If a connection is made between a 9-1-1 operator and
your vehicle, you understand and agree that 9-1-1 operators may, like any other 9-1-1 call, record conversations
and sounds in and near your vehicle upon connection.
9-1-1 Call System Limitations
Vehicles sold in Canada and Mexico DO NOT have 9-1-1
Call system capabilities. 9-1-1 or other emergency line
operators in Canada and Mexico may not answer or
respond to 9-1-1 system calls. If the 9-1-1 Call system
detects a malfunction, any of the following may occur at
the time the malfunction is detected.
• The Rearview Mirror light will continuously be illuminated red.
• The screen will display the following message “Vehicle
phone requires service. Please contact your dealer.”
• An In-Vehicle Audio message will state “Vehicle phone
requires service. Please contact your dealer.”
2
50 ALL ABOUT Uconnect® ACCESS
Even if the 9-1-1 Call system is fully functional, factors
beyond Chrysler Group LLC’s control may prevent or
stop 9-1-1 Call system operation. These include, but are
not limited to, the following factors:
• The ignition key has been removed from the ignition
and the delayed accessories mode is active.
• The ignition key is in OFF position.
• The vehicle’s electrical systems are not intact.
• The 9-1-1 Call system software and/or hardware is
damaged during a crash.
• The vehicle battery loses power or becomes disconnected during a vehicle crash.
• Wireless and/or Global Positioning Satellite signals
are unavailable or obstructed.
• Equipment malfunction at the 9-1-1 operator facility.
• Operator error by the 9-1-1 operator.
• Wireless network congestion.
• Weather.
• Buildings, structures, geographic terrain, or tunnels.
If your vehicle loses battery power for any reason (including during or after an accident) the 9-1-1 Call System,
among other vehicle systems, will not operate.
Requirements
• This feature is available only on vehicles sold in the
US.
• Vehicle must be properly equipped with the
Uconnect® Access System.
• Vehicle must be in range of a usable and authorized
cellular signal.
• Vehicle must be powered in the ON/RUN or ACC
(Accessory) position with a properly functioning electrical system.
ALL ABOUT Uconnect® ACCESS 51
WARNING!
• Never place anything on or near the vehicle’s
wireless and GPS antennas. You could prevent
wireless and GPS signal reception, which can prevent your vehicle from placing an emergency call.
Wireless and GPS signal reception is required for
the 9-1-1 Call system to function properly.
• Failure to perform scheduled maintenance and
regularly inspect your vehicle may result in vehicle
damage, accident or injury.
• Ignoring the Rearview Mirror light could mean you
will not have 9-1-1 Call services if needed. If the
Rearview Mirror light is illuminated, have an authorized dealer service the 9-1-1 Call system immediately.
(Continued)
2
52 ALL ABOUT Uconnect® ACCESS
WARNING! (Continued)
• The Occupant Restraint Controller (ORC) turns on
the Air Bag Warning Light on the instrument panel
if a malfunction in any part of the air bag system is
detected. If the Air Bag Warning Light is illuminated, the air bag system may not be working
properly and the 9-1-1 system may not be able to
send a signal to a 9-1-1 operator. If the Air Bag
Warning Light is illuminated, have an authorized
dealer service your vehicle immediately.
• If anyone in the vehicle could be in danger (e.g.,
fire or smoke is visible, dangerous road conditions
or location), do not wait for voice contact from a
9-1-1 operator. All occupants should exit the vehicle
immediately and move to a safe location.
(Continued)
WARNING! (Continued)
• Do not add any aftermarket electrical equipment to
the vehicle’s electrical system. This may prevent
your vehicle from sending a signal to initiate an
emergency call. To avoid interference that can
cause the 9-1-1 Call system to fail, never add
aftermarket equipment (e.g., two-way mobile radio, CB radio, data recorder, etc.) to your vehicle’s
electrical system or modify the antennas on your
vehicle. If your vehicle loses power for any reason
(including during or after an accident) the
Uconnect® features, Apps and services among others will not operate.
FAQs
1. What Happens If I Accidentally Push The 9-1-1
Button On The Mirror? You have 10 seconds after
pushing the 9-1-1 button to cancel the call. To cancel
the call, either push the “9-1-1” button again, or press
the “cancel” button on the in-vehicle touchscreen.
2. What Type Of Information Is Sent When I Call 9-1-1
From My Vehicle? Certain vehicle information, such
as make and model, is transmitted along with last
known GPS location. Also note that 9-1-1 operators
may record conversations and sounds within your
vehicle once a connection is made, and that by using
the service you consent to having this information
shared.
3. When Could I Use The 9-1-1 Button? You can use the
9-1-1 button to make a call if you or someone else
needs emergency assistance.
ALL ABOUT Uconnect® ACCESS 53
Roadside Assistance Call
Easy Call To Roadside Assistance 24/7 Using Assist
Button
2
54 ALL ABOUT Uconnect® ACCESS
Uconnect® Access In-Vehicle Assistance Features
With Uconnect® Access, your vehicle has on-board assistance features located on the rear view mirror designed to
enhance your driving experience if you should ever need
assistance or support.
Description
Vehicles equipped with the Uconnect® Access system
feature will contain an ASSIST button on the rear view
mirror. Once the vehicle has been registered and is
subscribed to the Advantage Package, the ASSIST button
can connect you directly to one of three important care
centers for support.
• Roadside Assistance — If you get a flat tire, or need a
tow, you’ll be connected to someone who can help
anytime. Additional fees may apply. (see the Disclaimers section below for more detail).
• Uconnect® Care — In vehicle support for Uconnect®
Access System, Apps, and Features.
• Vehicle Care — Total support for your Chrysler Group
vehicle.
How It Works
You or someone in the vehicle simply presses the ASSIST
button located on the rear view mirror and you will be
presented with your ASSIST options. Make your selection by pressing the screen.
Requirements
• This feature is available only on vehicles sold in the
US.
• Vehicle must be properly equipped with the
Uconnect® Access System.
• Vehicle must be in range of a usable and authorized
cellular signal.
• Vehicle must be registered with Uconnect® Access and
have an active subscription that includes the applicable feature or App.
• Vehicle must be powered in the ON/RUN or ACC
(Accessory) position with a properly functioning electrical system.
ALL ABOUT Uconnect® ACCESS 55
Disclaimers
If Roadside Assistance is provided to your vehicle, you
agree to be responsible for any additional roadside
assistance service costs that you may incur. In order to
provide Uconnect® Services to you, we may record and
monitor your conversations with Roadside Assistance,
Uconnect® Care or Vehicle Care, whether such conversations are initiated through the Uconnect® Services in
your vehicle, or via a landline or mobile telephone, and
may share information obtained through such recording
and monitoring in accordance with regulatory requirements. You acknowledge, agree and consent to any
recording, monitoring or sharing of information obtained
through any such call recordings.
2
56 ALL ABOUT Uconnect® ACCESS
FAQs
1. What Is The Phone Number For Roadside Assis-
tance? The phone number is 800-521-2779.
NOTE: Some Apps are suspended while an Assist call is
active
2. If I Am Subscribed To Uconnect® Access, Does It
Cover Towing Or Other Expenses Incurred By Using
Chrysler Roadside Assistance? No, however your
new vehicle may include Roadside Assistance services.
Yelp®
Looking for a burrito joint that is open? A boutique to
buy a new pair of jeans? Yelp® is here to help. Use Yelp®
to search for places to eat, shop, relax and play.
Description
Yelp® is a familiar, widely used website and mobile app
that connects people to great local businesses. Now with
Uconnect® Access, Yelp® has been adapted for your
vehicle, and on the go capability. Yelp® gives you the
ability to search for a Point of Interest (POI) or desired
destination using either pre-defined search categories, or
custom searches, using keywords like “tacos.” Searching
can be done by voice recognition or by using the touchscreen keypad.
Here is what Yelp® can do for you while you are on the
road:
• Deliver a list of up to 20 results, prioritizing by best
match, by distance or rating.
• Provide up-to-date search listings (pulling the latest
information from the cloud).
• The live and local search engine will scan 12 categories
and millions of POIs to provide drivers with a local
guide for real word-of-mouth recommendations.
• With one press, select from the list to find location
address, phone number, user ratings, hours of operation (if available) and price ratings (if available).
• The ability to call the selected POI directly (a phone
must be paired via Bluetooth®), or have the address
immediately sent to the navigation system for routing
(if equipped).
ALL ABOUT Uconnect® ACCESS 57
How It Works
1. Using the touchscreen, launch Yelp® by pressing
Apps > All Apps > Yelp®.
OR
Using voice recognition, push the
say “Launch Yelp®.”
button and
2
58 ALL ABOUT Uconnect® ACCESS
Give It A Try!
1. Push the
button on the steering wheel and say
“Launch Yelp®.”
2. Push the
button on the steering wheel and say
“Yelp® Search.”
3. Uconnect® will prompt you to say something like,
“car wash.” After the beep, say “restaurants.”
4. The Uconnect® system will link out to the cloud to do
your Yelp® search, and depending on your search
request, this may take up to 30 seconds.
5. Using the touchscreen, select a restaurant from the list
of search results.
6. Navigate to the location by pressing “Go Now” (if
equipped with navigation)
NOTE: Save your destination to Favorites. To find it
again go to Nav > Where to > Favorites.
ALL ABOUT Uconnect® ACCESS 59
Voice Command (VR
Action Touchscreen
Open Yelp® Apps > All Apps >
Yelp®
Create a Custom Search Press inside the ⬙search⬙
field. Using the keypad,
type what you are looking for.
Initiate a search for a
nearby POI
Find nearest Restaurants Select Restaurants ⬙Restaurants⬙ Say ⬙Restaurants⬙
Find nearest Nightlife Select Nightlife ⬙Nightlife⬙ Say ⬙Nightlife⬙
Find nearest Coffee Select Coffee ⬙Coffee⬙ Say ⬙Coffee⬙
Find nearest Entertain-
ment
Find nearest Gas Select Gas ⬙Gas⬙ Say ⬙Gas⬙
Select <Search Category> ⬙Yelp® Search⬙ Say ⬙Yelp® Search⬙
Select Entertainment ⬙Entertainment⬙ Say ⬙Entertainment⬙
button on steering
wheel)
⬙Launch Yelp®⬙ Say ⬙Launch Yelp®⬙
–
Give It A Try!
Type ⬙Sushi⬙
2
60 ALL ABOUT Uconnect® ACCESS
Voice Command (VR
Action Touchscreen
button on steering
Give It A Try!
wheel)
Find nearest Hotels Select Hotels Hotels⬙ Say ⬙Hotels⬙
Find nearest Banks Select Banks ⬙Banks⬙ Say ⬙Banks⬙
Find nearest Parking Select Parking ⬙Parking⬙ Say ⬙Parking⬙
Find nearest Shopping Select Shopping ⬙Shopping⬙ Say ⬙Shopping⬙
Find nearest Drugstores Select Drugstores ⬙Drugstores⬙ Say ⬙Drugstores⬙
Find nearest Urgent Care Select Urgent Care ⬙Urgent Care⬙ Say ⬙Urgent Care⬙
Find nearest Hospitals Select Hospitals ⬙Hospitals⬙ Say ⬙Hospitals⬙
Select a POI Select <POI> from the
– Select <POI>
list
Add a Custom Search
Press the star to add it – Press the star
Category
Delete a Custom Category Press the star to removeit– Press the star (there is a
confirmation pop-up)
Action Touchscreen
Sort search results by Best
Match, Rating or Distance
Route to a POI (if
equipped)
Call a POI (via
Bluetooth®)
Press Best Match, Rating,
or Distance
Press Go Now – Press Go Now
Press <phone number> – Press <phone number>
ALL ABOUT Uconnect® ACCESS 61
Voice Command (VR
button on steering
wheel)
– Press Rating
Give It A Try!
2
62 ALL ABOUT Uconnect® ACCESS
How To Add And Delete Search Categories
Yelp® provides the ability to save custom search categories by first initiating
the search, then pressing the star. To
delete a search category, select it, and
press the star. A confirmation prompt
will appear to confirm. Create up to 36
custom search categories!
Requirements
• Vehicle must be properly equipped with the
Uconnect® Access System.
• Vehicle must be in range of a usable and authorized
cellular signal (indicated by the signal strength bars on
the “Apps” button on the bottom right hand side of the
touchscreen).
• Vehicle must be registered with Uconnect® Access and
have an active subscription that includes the applicable feature or App.
• Vehicle must be powered in the ON/RUN or ACC
(Accessory) position with a properly functioning electrical system.
• Vehicle must have onboard navigation to use Go Now.
• Mobile device must be paired with Bluetooth® and
connected to call a POI directly.
Safety Information
WARNING!
• ALWAYS drive safely with your hands on the
steering wheel. You have full responsibility and
assume all risks related to the use of the Uconnect®
features and applications in this vehicle. Only use
Uconnect® when it is safe to do so. Failure to do so
may result in an accident involving serious injury
or death.
• It is not possible to use some of the touchscreen
features while the vehicle is in motion (e.g. key
pad).
ALL ABOUT Uconnect® ACCESS 63
Tips And Shortcuts
• To improve your search results, use single search terms
like “coffee” rather than multiple words, which may
deliver mixed results, for example, “home improvement and gardening stores.”
• Press the “microphone” on the touchscreen to use
voice commands.
• If you wish to cancel a search request, press “Cancel.”
• To learn more about a listing, press the line that
appears on the display details such as the address,
phone number and hours of operation (if applicable).
• Sort results by Best Match, Rating or Distance (default
is Best Match).
• The Rating tab will re-sort your search based on
ratings submitted by everyday users to Yelp®’s online
database.
2
64 ALL ABOUT Uconnect® ACCESS
• Distance will sort by the closest POI near you.
• To bypass the voice prompts hit the
button a
second time to barge in and state your desired
command.
• To exit Yelp®, press the “X” (close) button in the upper
right corner of the touchscreen.
FAQs
1. Is there a Help menu within the Yelp® App? No, but
you may Push the ASSIST button and select
Uconnect® Care to ask for help.
2. Will Yelp® allow me to route directly to my desired
search result? Yes, by selecting Go Now. A factory or
dealer-installed Uconnect® navigation system is required.
3. Will Yelp® allow me to make a phone call to my
desired search result? Yes. Phone must be paired and
connected.
4. How many search results does Yelp® generate at a
time? Maximum of 20 listings.
5. How do I select my final desired location? Make your
final selection by pressing the desired POI name in
your search result list. Voice recognition is not supported for the final POI selection.
6. Can I conduct a search using a phone number? The
ability to search Yelp® by phone number is not
currently available.
7. Why don’t I see the Yelp® App on my in-vehicle
touchscreen? The vehicle must be registered with
Uconnect® Access and have an active subscription
that includes the applicable feature or App. The App
may take several minutes to download after completing registration for the first time.
8. What is the difference between Yelp® and onboard
navigation? Both experiences are slightly different,
but may yield the same results. For example, while
both the onboard navigation system and Yelp® conveniently provide pre-defined search categories,
Yelp® gives the customer the ability to create their
own custom search category, such as “Guitar shops.”
In addition, the customer may be able to view a POI on
a map before routing there when using the onboard
navigation system. Both onboard navigation and
Yelp® provide phone numbers when they are available, but Yelp® provides the customer with user
ratings and hours of operation (when available). Since
ALL ABOUT Uconnect® ACCESS 65
Yelp® pulls its data from the cloud, the customer will
always get the most up-to-date information. Finally,
Yelp® requires that the vehicle be in range of a usable
and authorized cellular signal.
9. Why doesn’t Yelp® recognize my Voice Command
search request? To Search Yelp®, Uconnect® must
establish a connection to the Yelp® cloud-based service, using the built in 3G connection in your
Uconnect® Access system. Be sure to wait until AFTER the beep, before you speak your search request.
Your voice command might not be fully captured if
there is a misrecognition, resulting in inaccurate results. You will see visual cues highlighted in green, in
the lower left corner of the radio which says “Listening” to let you know it’s your turn to say a command.
2
66 ALL ABOUT Uconnect® ACCESS
10. How come I don’t see the same results when I use
Yelp® on my smart phone? This is because Yelp® is
only returning locations that have been rated by
Yelp® users. Un-rated locations do not show up in
the search results. This is an enhancement that will be
coming soon.
11. Can I use Yelp® to search for places based on my
end destination, instead of just places around me?
Yes, you can say “Pizza in Chicago,” and add it as a
stop on your road trip.
Theft Alarm Notification
Notifies you via email or text message (SMS) when the
vehicle’s factory-installed theft alarm system has been
set-off.
Description
The Theft Alarm Notification feature notifies you via
email or text message (SMS) when the vehicle’s factoryinstalled theft alarm system has been set-off. You’ve
probably seen this before, a vehicle’s alarm goes off in a
parking lot or out on the street, and the owner is nowhere
to be found. With Theft Alarm Notification your vehicle
will alert you of the situation.
Should you receive a notification that your theft alarm
has been set-off, please react with caution. There are a
number of reasons why your alarm may have been
triggered, one of which could be that your vehicle was
stolen. If so, please see the details of the Stolen Vehicle
Assistance service below.
How It Works
Theft Alarm Notification can send you an email or text
message (SMS) should the alarm go off. The following
instructions will help you manage your notifications.
1. Log on to the Mopar Owner Connect website
moparownerconnect.com
(
password you used when registering your Uconnect®
Access system.
• If you forgot your username or password, links are
provided on the website to help you retrieve them.
2. Once logged in you will find yourself on the Dashboard. Click on the “Edit Profile” button in the upperright corner of the page.
3. Click on the “Notifications” tab on the left side of the
page.
4. If you have more than one vehicle with Uconnect®
Access, please select which vehicle you want to manage notifications for using the drop down menu.
5. You can enter up to five mobile phone and/or email
addresses to your notifications, and you can customize
which ones receive the types of messages.
) using the username and
ALL ABOUT Uconnect® ACCESS 67
6. You will receive a confirmation text message, asking to
confirm and receive vehicle notifications. If you are ok
with this, reply to the text message saying “yes”
(message and data rates may apply, please see your
mobile phone provider for details). If you have questions, text “HELP” in your reply.
7. You’re all set. Should your theft alarm go off, a
notification(s) will be sent to the number(s) and/or
email(s) you provided.
Requirements
• Vehicle must be properly equipped with the
Uconnect® Access System and a factory installed Theft
Alarm system.
• Vehicle must be in range of a usable and authorized 3G
cellular signal.
2
68 ALL ABOUT Uconnect® ACCESS
• Vehicle must be registered with Uconnect® Access and
have an active subscription that includes the applicable feature or App.
• Owner must properly set-up notification to have the
Theft Alarm Notification sent to an appropriate mobile
phone or email account.
CAUTION!
In the event your theft alarm is activated, use
caution and evaluate the situation from a safe
distance. If any unauthorized or suspicious person
is near or inside of your vehicle, immediately
contact the police. Do not do anything that could
jeopardize your safety or the safety of those
around you.
FAQs
1. What do I do if my Theft Alarm goes off? In the event
your theft alarm is activated, use caution and evaluate
the situation from a safe distance. If any unauthorized
or suspicious person is near or inside of your vehicle,
immediately contact the police. Do not do anything
that could jeopardize your safety or the safety of those
around you.
2. How can I change where I receive notifications? You
can manage your notifications by going to the Mopar
Owner Connect website (
moparownerconnect.com
and log in with your username and password. Once
there, you can click on “Edit Profile”, then the “Notifications” tab.
)
3. Can I receive a text message (SMS) when my Theft
Alarm goes off? Yes. Text messages are a convenient
and quick way to receive notifications. You can manage your notifications by going to the Mopar Owner
Connect website (
in with your username and password. Once there, you
can click on “Edit Profile”, then the “Notifications” tab
to add, remove and edit your notification options.
Stolen Vehicle Assistance
If your vehicle is ever stolen, this App (with your
permission) can provide its location to the law enforcement to help them track it down.
Description
If your vehicle is stolen, contact local law enforcement
immediately to file a stolen vehicle report. Once this
report has been filed with law enforcement and you have
also notified Uconnect® Care that you have filed the
report, Uconnect® Care can help locate your vehicle. The
moparownerconnect.com
) and log
ALL ABOUT Uconnect® ACCESS 69
Uconnect® Care Agent will ask for the stolen vehicle
report number issued by local law enforcement. Then,
using GPS technology and the built-in wireless connection within your vehicle, the Uconnect® Care Agent will
be able to locate the stolen vehicle and work with law
enforcement to help recover it. (Vehicle must be within
the United States, have network coverage and must be
registered with Uconnect® Access with an active subscription that includes the applicable feature).
Stolen Vehicle Assistance is a secure process that can only
be done with your permission. Law enforcement gets
involved only after you file a stolen vehicle report with
them.
How It Works
1. If your vehicle is stolen, contact local law enforcement
as soon as possible. They will work with you to file a
stolen vehicle report.
2
70 ALL ABOUT Uconnect® ACCESS
2. Next, inform Uconnect® Care that your vehicle has
been stolen. Uconnect® Care can be reached by calling
855-792-4241. The Uconnect® Care Agent will ask for
the stolen vehicle report number (as issued by your
local law enforcement).
If you have downloaded the Uconnect® Access App,
you can push the “Operator” button on your smartphone and select “Uconnect® Care” to make the call.
3. Uconnect® Care will authenticate that you are the
owner of the vehicle and contact the law enforcement
with whom you filed the stolen vehicle report.
4. Uconnect® Care will work with your local law enforcement to track and attempt to recover the vehicle.
You will be contacted by law enforcement if your
vehicle is recovered. While the investigation is ongoing, you should also contact your insurance company
to inform it of the situation.
Requirements
• Vehicle must be properly equipped with the
Uconnect® Access System.
• Vehicle must be in range of a usable and authorized
cellular signal.
• Vehicle must be registered with Uconnect® Access and
have an active subscription that includes the applicable feature or App.
Disclaimers
• No security system is invincible, and vehicle thieves
may develop ways to prevent your vehicle from being
located.
FAQs
1. What do if my vehicle is stolen? First, call local law
enforcement as soon as possible. They will work with
you to file a stolen vehicle report. Then call Uconnect®
Care at 855-792-4241 and inform Uconnect® Care that
your vehicle has been stolen and that you have filed a
stolen vehicle report with law enforcement.
Uconnect® Care will help you through the process.
2. Can someone track my vehicle? To ensure your
privacy, and the privacy of others using your vehicle,
you must involve local law enforcement to have
Uconnect® locate your vehicle. This helps to ensure
that someone is not tracking your vehicle for purposes
other than at your request to locate it in the event it is
stolen.
ALL ABOUT Uconnect® ACCESS 71
3. How will I know if my vehicle is recovered? After
you provide the Uconnect® Care Agent with the
stolen vehicle report, the agent will work together
with law enforcement to try to locate your vehicle. If
your vehicle is recovered, you will be contacted by law
enforcement.
4. Can Uconnect® Access lower my insurance rates?
Some insurance providers offer lower rates on vehicles
equipped with systems that can deter auto theft. When
shopping for insurance, be sure to inform your insurance provider of your Uconnect® Access system (Stolen Vehicle Assistance requires a subscription), to find
out if your insurance provider offers a lower rate if
your vehicle is equipped with Uconnect® access and
you have an active subscription.
2
72 ALL ABOUT Uconnect® ACCESS
WiFi Hotspot
WARNING!
Create A 3G WiFi Hotspot For Use In
Your Vehicle
Description
WiFi Hotspot is on-demand WiFi + 3G
connectivity that’s built-in and ready
to go whenever you are. Once your
vehicle is registered for Uconnect® Access, you can
purchase a WiFi Hotspot subscription at the Uconnect®
Store. After you’ve made your purchase, turn on your
signal and connect your devices.
Do Not use the WiFi Hotspot while operating the
vehicle. Only use the WiFi Hotspot when it is safe
to do so.
• Enables all your passengers to be simultaneously
connected to the web.
• Connect several devices at one time.
• Any WiFi-enabled device — such as a laptop or any
other portable enabled media can connect over your
private in-vehicle network.
• A high-speed, secured connection lets anyone on your
private network access the Web — great for working
and relaxing
How It Works
The WiFi Hotspot feature provides the vehicle passengers
with an internet access hot spot in the vehicle, using the
radio as an access point. The hot spot will allow WiFi
enabled in-vehicle devices (such as a laptop or any other
portable enabled media device) to wirelessly connect to
the internet.
ALL ABOUT Uconnect® ACCESS 73
Give it a Try!
1. Purchase a subscription to the WiFi Hotspot feature
for a day, a week, or a month. You can buy WiFi
Hotspot in one of two ways:
• From your in-vehicle touchscreen (Apps > All Apps
> Uconnect® Store)
• From the Mopar Owner Connect website
moparownerconnect.com
(
Store.
NOTE: You must set up your Uconnect® Payment Account on the Mopar Owner Connect website and establish a Uconnect® Payment PIN to purchase WiFi
Hotspot.
) > Shop > Uconnect®
2
74 ALL ABOUT Uconnect® ACCESS
2. After purchasing WiFi Hotspot, it will be enabled/
turned on in your vehicle. The WiFi Hotspot App can
be found on your in-vehicle touchscreen by selecting
Apps > All Apps > WiFi Hotspot.
3. WiFi Hotspot should be turned on after purchasing a
subscription. To disable WiFi Hotspot, simply press to
uncheck the box to the right of the App (this feature is
available while the vehicle is in motion).
ALL ABOUT Uconnect® ACCESS 75
2
Optional: Give your hot spot a unique name by
pressing Hotspot Name (key pad is not available
while vehicle is in motion).
4. From your in-vehicle touchscreen, select the appropriate in-vehicle network and the desired security level
setting. Each security level has different pass phrase
constraints. Change the security level setting by selecting the checkbox for any of the following security
settings.
76 ALL ABOUT Uconnect® ACCESS
• WPA2/WPA — “WiFi Protected Access” – This is the
default security and can be changed by pressing
WiFi Hotspot > View/Edit Pass phrase.
• WEP — “Wired Equivalent Privacy” – Pass phrase
must be 13 characters long.
• None — No security, will not prompt you for a pass
phrase, when you attempt to connect to WiFi
Hotspot.
5. From your Wi-Fi enabled device (laptop, tablet, etc.)
• Search for and select the Uconnect® hotspot in the
settings of your device
• Type the network security key (this is called “pass
phrase” and is found in Apps > All Apps > WiFi
Hotspot > View/Edit Pass phrase)
• Click OK
You are now connected!
NOTE: Refer to your device’s owner’s manual for specific information related to your device.
Requirements
• Vehicle must be properly equipped with the
Uconnect® 8.4A or 8.4AN.
ALL ABOUT Uconnect® ACCESS 77
• Vehicle must be registered with Uconnect® Access and
have an active WiFi Hotspot subscription ( WiFi Outpost will be turned off if there is no active
subscription).
• Vehicle must be in the ON/RUN or ACC (Accessory)
position and have a properly operating electrical system for any of the in-vehicle Uconnect® features to
function.
Disclaimers
• Factors affecting the performance of WiFi Hotspot
include: cellular network signal strength and quality,
time of day, number of channels used by the service
provider, type of connection, number of clients using
WiFi Hotspot and client device.
2
• Vehicle must be in active and usable range of authorized 3G wireless signal (802.11G, 54 Mbps).
• WiFi Hotspot does not enable direct communication
between multiple in-vehicle devices.
78 ALL ABOUT Uconnect® ACCESS
• While the vehicle is in motion it is possible to enable or
disable the WiFi Hotspot. Simply press to check or
uncheck the box to the right of the App.
• For your own safety, it is not possible to use some of
the touchscreen features while the vehicle is in motion.
The key pad is not available while the vehicle is in
motion.
CAUTION!
ALWAYS drive safely with your hands on the wheel.
You have full responsibility and assume all risks
related to the use of the Uconnect® features and
applications in this vehicle. Only use Uconnect®
when it is safe to do so. Failure to do so may result in
an accident involving serious injury or death.
Tips And Shortcuts
• Give your WiFi Hotspot a unique name by pressing
“Hotspot Name” within the WiFi Hotspot App.
• To view a list of connected devices, press “View
Connected Devices” within the WiFi Hotspot App
when the hot spot is turned on.
• If WiFi Hotspot Off is shown, then WiFi is not activated (must be On for connectivity to be enabled.)
• If Enable WiFi Hotspot is unchecked, then WiFi is not
activated.
• To quickly enable or disable WiFi Hotspot, press to
check or uncheck the box to the right of the App.
FAQs
1. How do I know if I have a good signal strength?
There is a signal strength indicator on the Apps button
of the radio touchscreen.
2. What do I do if the WiFi Hotspot connection drops
while I’m driving? The connection will be automatic
when you enter an area with cellular coverage. Factors
affecting the performance of WiFi Hotspot include:
cellular network signal strength and quality, time of
day, number of channels used by the service provider,
type of connection, number of client using WiFi
Hotspot, client device.
3. What is the factory default security setting? WPA2/
WPA
ALL ABOUT Uconnect® ACCESS 79
4. What if I want to create a custom password for my
connection? Select either WPA2/WPA or the WEP
setting and create a pass phrase by pressing Apps >
All Apps > WiFi Hotspot > View/Edit Pass phrase.
5. I do not see the connection on my wireless laptop or
phone, what should I do? Refer to your device’s
owner’s manual for specific information related to
your device.
6. Are there any data constraints with WiFi Hotspot?
WiFi Hotspot must be purchased in either one day, one
week or one month durations.
2
80 ALL ABOUT Uconnect® ACCESS
SRT Performance Pages/SRT Performance Pages Plus
Save And Share Your Best Performance Results With
The SRT Performance Pages App. (Available Only On
SRT Performance Vehicles.)
Description
The SRT Performance Pages App gives SRT vehicle
drivers the tools to become familiar with their vehicle’s
performance. The App provides access to real-time vehicle performance information* including timers (such as
0 to 60 mph elapsed time), G-force, gauges, and engine
performance. This data can be downloaded to a USB stick
or SD card, allowing for easy sharing of your driving
performance. With SRT Performance Pages Plus, drivers
can also download the data to the web.
*Some information will only be available when vehicle is
not in motion.
How It Works
From the Radio touchscreen
1. Press the “SRT & Apps” button at the bottom of the
screen.
2. Select the “Information Apps” button on left side of
screen.
3. Select Performance Pages line item.
4. The Performance Pages App home page will display
with a vehicle graphic and menu item button on the
touchscreen on the left.
ALL ABOUT Uconnect® ACCESS 81
5. You can navigate between the Menu item performance
button tabs on the left side of screen.
2
82 ALL ABOUT Uconnect® ACCESS
1 — Home
2 — Timers
3 — G-Force
4 — Gauges 1
5 — “Scroll Down” Button
1 — Gauges 2
2 — Engine
3 — Options
4 — “Scroll Up” Button
6. If you chose the Timers tab, you will get an overview
of vehicle run time stats. You can view and compare
driving performance by choosing between your
“Best,” “Last” and “Current” run times. This data can
be saved, downloaded and shared. Timers performance will display data such as:
• Run title (you will have the option to select among
Current, Last or Best run)
• 0-60 mph or 0-100 ET
• ⅛ mile ET or 200 meter ET
• ⅛ mile mph or 200 meter kph
• ¼ mile ET or 400 meter ET
• ¼ mile mph or 400 meter mph
• Braking distance ft or meters
• Braking speed mph or meters
ALL ABOUT Uconnect® ACCESS 83
2
84 ALL ABOUT Uconnect® ACCESS
Downloading Timers Data
Choosing the “Save” button on the touchscreen allows
you to save your run ticket. Data saved will include date,
time stamp, timer data, brake distance and brake speed.
If you want to download the Timers information, a
message on the ticket on the radio touchscreen will give
you three options on where you want to download data:
USB, SD Card or Website.
NOTE: You will only have the option to download to the
Web if you have SRT Performance Pages Plus.
You can also select the “Cancel” button to return to the
previous screen.
ALL ABOUT Uconnect® ACCESS 85
USB — If you choose “USB,” plug the USB stick into the
USB port, press the “USB” button on the touchscreen,
and follow the instructions to download the timer.
SD Card — If you choose “SD Card,” insert the SD Card
into the slot, press the “SD Card” button on the faceplate,
and follow the instructions to download the timer.
Web — If you choose “Website,” the embedded cellular
connection will automatically save the file to the Mopar
Owner Connect website (
You will need to logon to this URL and download the
ticket as needed.
NOTE: Files will download in HTML format.
moparownerconnect.com
2
).
86 ALL ABOUT Uconnect® ACCESS
Once the option to Save is selected, you will receive a
confirmation notification. If you selected to save to the
website, the URL will be provided where you can view
performance data and download the ticket.
The file will save with the name: RunType, Date and
Time file was saved, and Vehicle Line. Example of a
saved file name is “Best_19JAN11_0930AM_Viper.html”
Only the 10 most recent saved runs will be stored and
available on the website, so the oldest run will be
overwritten for another if there are already 10. Each
saved run will be stored on the website until it is
overwritten.
The Timers page is only shown when the driver selects
the Timers button on the faceplate. It will not appear
when criteria for a timer has been met or when prior
performance exceeded. However, the timer results will be
calculated upon meeting the criteria of that timer.
ALL ABOUT Uconnect® ACCESS 87
7. If you chose the G-Force tab, you will see displays of
the vehicle dynamics from G-Force page including
information such as:
• Vehicle Drift Graphic — Vehicle graphic will adjust
based on vehicle’s movement.
• Current speed — Same as the instrument cluster.
• Steering Angle — Uses the steering angle sensor to
measure the degree of steering wheel.
• Lateral G-force — Measures the left and right turning force of the vehicle.
• Longitudinal G-force — The longitudinal g-force will
measure the acceleration and braking force of the
vehicle.
• G-force visual — Visual of the current amount of
g-force the vehicle is producing, either longitudinal
or lateral.
2
88 ALL ABOUT Uconnect® ACCESS
8. If the Gauges 1 tab is chosen, you will see a display of
vehicle gauges. Information displayed will be the
same as on the instrument cluster such as:
• Oil Temperature
• Battery Voltage
• Oil Pressure
9. If the Gauges 2 tab is chosen, you will see a display of
vehicle gauges with information such as:
• Oil Temperature
• Battery Voltage
• Oil Pressure
• Coolant temperature
• Intake Air Temperature
10. If the Engine tab is chosen, you will see a display of
real-time engine data that will be the same as displayed on the instrument cluster such as:
• Speedometer — Current speed reading.
• Horsepower — Current horsepower reading.
• Torque — Current torque reading.
• Oil Pressure — Current oil pressure reading.
11. If the Options tab is chosen, it will allow the driver to
add details to the graphic display of the vehicle on
the radio touchscreen such as:
• Home Picture — Select a vehicle image to be displayed. Pressing the home picture option will allow
the driver to make changes.
ALL ABOUT Uconnect® ACCESS 89
NOTE: Graphic will represent the owner’s vehicle, e.g.
Viper or Grand Cherokee.
• Vehicle Color Options — Customize the color of the
vehicle displayed on the home picture.
• Accept Button — Saves your selections.
2
90 ALL ABOUT Uconnect® ACCESS
Give It A Try!
1. Bring the vehicle to a complete stop, but leave vehicle
ON for the instrument gauges to be active.
2. Select the “Apps” button at bottom of radio touchscreen.
3. Select the “Information Apps” button on left side of
radio.
4. Select the “SRT Performance Pages.”
5. Select the “Timers” tab from left side of screen.
The Timer will present data from your current drive
cycle until the vehicle reaches a Timer milestone or a
Timer constraint is broken.
NOTE: If the vehicle does not reach a Timer milestone or
a Timer constraint is broken, the data will show only
dashes “- - “ as the result.
6. Bring the vehicle to a complete stop after reaching the
target speed or distance.
7. You can view the Timer performance data on the radio
from the drive cycle by selecting the “Apps” button on
the faceplate, then the Information Apps button, then
SRT Performance pages tab:
• Select Ticket displays.
• Select “Current,” “Last,” or “Best” ticket displays.
• Press the “Save” button on the faceplate to save
results.
Requirements
• Vehicle must be a SRT performance vehicle properly
equipped with the Uconnect® Access System.
• Vehicle must be in range of a usable and authorized 3G
cellular signal.
• Vehicle must be powered in the ON/RUN or ACC
(Accessory) position with a properly functioning electrical system.
Disclaimers
• Vehicle must be registered with Uconnect® Access and
have an active subscription to get SRT Performance
Pages Plus.
• The first time the SRT Performance Pages App is
activated, an alert will appear that the driver should
not be driving while engaging the performance tools.
Tips
• Accessing the Timers page for the first time, double
dashes (“- -“) will display as values for all timers, until
real values can be acquired.
ALL ABOUT Uconnect® ACCESS 91
• Upon accessing the Timers screen after an ignition
cycle and/or battery disconnect, the driver will see the
“Best” set of values for all performance indicators, as
received from the cluster.
• If accessing Timers screen after an ignition cycle
and/or battery removal, if the driver selects “Current”,
double dashes (“- -”) will display for all timers, until
real values can be acquired.
• The “Current” ticket maintains the same values until
the vehicle speed is greater than 0 again, assuming the
driver is beginning another run. This functionality is
based upon the data as it is received from the cluster.
• Once the vehicle speed is greater than 0 again, the
“Current” page values are moved to the “Last” page
and the “Current” page is cleared out. The “Last”
ticket shows only the exact last run, not the last value
for each timer.
2
92 ALL ABOUT Uconnect® ACCESS
FAQs
1. How do I get SRT Performance Pages? This App is
pre-loaded from the factory.
2. Do I turn Performance Pages “ON” or “OFF” at any
time? No. You do not need to do anything to start or
stop performance pages or Timers. The vehicle is
always running and calculating this information.
3. Why are these specific measurements shown in
Timers? Measurements were shown that were common measures to performance driving.
4. Do I need to register? You need to register the vehicle
and subscribe to Uconnect® Access in order to get SRT
Performance Pages Plus. If a customer does not register, SRT Performance Pages will still be available.
5. What is the difference between SRT Performance
Pages and SRT Performance Pages Plus? SRT Performance Pages Plus gives you the additional option to
save performance data to the web.
6. Do I have to do anything to turn on the Timers data?
No, the timers in an SRT vehicle are continuously
running to reflect this data.
7. If I chose to download my performance data to the
web, which site do I login to in order to download
this data? You will need to visit the Mopar Owner
Connect website (
moparownerconnect.com
)toac-
cess and download your performance data.
8. Why does my Timer performance data only show
dashes? Dashes will display if the Timer milestone
was not reached or the criteria needed to meet a
measurement was broken (such as 0-60 mph in 10
seconds, instead took 15 seconds.)
9. What are “Timer Constraints” or criteria that needs
to be met to show performance data?
• 0-60 MPH or 0-100 kph ET reached within 10 seconds
• Distance of 1/4 mile and 1/8 mile
• Brake timer when traveling > 30 MPH
• A braking event goes beyond 30 seconds
10. How many Timers are stored on the radio and for
how long? Performance timers are maintained as
long as you drive the vehicle. You can save the
statistics at any time.
11. Do all Timer measurements give a “Best”, “Last”
and Current” value? They all do except for Braking
which will not provide a “Best” measurement.
ALL ABOUT Uconnect® ACCESS 93
Voice Texting
Add Free-Form Voice Texts To Your Voice Text Reply Feature
Description
This Voice Texting enhances the Voice Text Reply feature
built into your Uconnect® Access 8.4A and 8.4AN radio.
While Voice Text Reply provides 18 pre-defined messages
you can send, Voice Texting lets you create and send
nearly any message you want. Just speak your message
as if you were talking to the recipient, and the Uconnect®
Access voice-texting technology will convert your voice
into a text message.
Voice Texting and Voice Text Reply features are compatible
with many newer Android and Blackberry phones. Before
using, determine if your phone has been tested to support
Bluetooth® “Message Access Profile (MAP)” at
UconnectPhone.com
phones do not currently support Bluetooth® MAP. Ensure MAP is ON and incoming message notification is
enabled.
. iPhone® and some other smart-
2
94 ALL ABOUT Uconnect® ACCESS
How It Works
Set Up Your Phone To Work With Voice Texting
After pairing your phone to the vehicle using Bluetooth®
UconnectPhone.com
(see
), push the “phone” button on
the menu bar of the radio to see the main Phone screen.
A minute or so after a compatible MAP enabled phone
has been Bluetooth® connected to the vehicle; the “messaging” button on the touchscreen will change from gray
to white. This is an indicator that Voice Texting will work
with your phone. Outgoing voice texts may not be
possible. The phone may allow incoming texts only.
Determine if your phone has been tested to support
Bluetooth® “Message Access Profile” (MAP) - at
UconnectPhone.com
. (Your phone may support Voice
Texting even if not found on this website. Check with
your phone manufacturer to see if it supports MAP
protocol.)
NOTE: If phone supports MAP, then ensure MAP is on
and incoming message notification is enabled, (see
UconnectPhone.com
for phone specific instructions).
Follow the steps below to see if your phone can set up to
work with Voice Texting.
Generic Phone Setup Instructions (your phone’s setup
process may be similar):
1. On phone select “Settings” (or the equivalent on your
phone)
2. Select Wireless/Bluetooth® settings
3. Ensure Bluetooth® is on (box checked)
4. Select Bluetooth® settings
5. Select Advanced setting
6. Ensure Message Access service is on (box checked)
7. Select Message Access settings
8. Check the box for SMS
9. Press the back button twice to return to the Bluetooth®
settings screen
10. Check the box for Discoverable
ALL ABOUT Uconnect® ACCESS 95
If a Bluetooth® authorization window appears showing
your phone requesting permissions, check the box for
Always and press Accept.
Sending A New Text Message From Radio
1. Push
2. Say “Send text message.”
3. The system will respond “Say the phone number or
the full name and the phone type of the contact that
you want to send a message to.”
4. Dictate message (“I will be home at eight.”)
5. When finished dictating, wait for prompt and say
“Send.”
on the steering wheel.
2
96 ALL ABOUT Uconnect® ACCESS
Dictate A Free-Form Reply To A Message From Radio
(Voice Text Reply)
1. Say “Reply to message n”
n = the number of the message
OR
Press “Reply” after viewing message
OR
Push the phone button and say “Reply.”
2. The system will say “Please say the message you want
to send.” (“I will be home at eight.”)
3. Say the message you want to send up to 160 characters
of text.
4. The system will repeat the message you dictated and
state available commands. If your message was too
long, the system will respond with “Your message was
too long. Your message was truncated.” Say “Send,” or
“Start Over” or “Continue.”
5. Say “Continue”
OR
Say “Start over”
OR
Say “Repeat”
OR
Say “Send”
OR
Say “Cancel.”
To Reply To A Message With A Pre-Formatted Response (Voice Text Reply)
ALL ABOUT Uconnect® ACCESS 97
1. Press “View” next to the message
2. Press “Reply”
NOTE: This function only operates while the vehicle is
not in motion.
3. Select the pre-formatted response by pressing it (“I
can’t talk right now”)
4. Press “Send”
Viewing Or Listening To Incoming Messages
To Listen to a Message from Radio
1. Push the ⬙Phone⬙ button on the steering wheel. Say
ⴖListen to messageⴖ
OR
Press the ⬙Listen⬙ button on the touchscreen.
2
98 ALL ABOUT Uconnect® ACCESS
Viewing Your Messages
1. Push the “Phone” button on the steering wheel.
2. Say “View message.”
OR
Press “View” on the in-vehicle touchscreen.
Contact names or phone numbers of the message
sender appears in a list along with View and Listen
buttons on the touchscreen.
Viewing A Specific Message
1. Press “View” next to the contact name/phone number
of the message you want to be displayed.
ALL ABOUT Uconnect® ACCESS 99
OR
Say “Show message n”
n = the number of the message
Listening To A Message
1. Press “Listen” on the touchscreen or push the “Phone”
button on the steering wheel and say “Listen,” the
Uconnect® system will read the received text message
over the vehicle audio system.
Barge-In
Barge-in is a feature that enables a user to say a valid
command without waiting for the system to finish speaking. When the system is “speaking” you can push the
button on the steering wheel and say a valid
command.
For example, if the system is explaining all of the options
available after dictating a text message, at any time the
2
Loading...