Chrysler Uconnect 5.0 2015 Owner's Manual Supplement

Owner’s Manual Supplement

Uconnect® 5.0

SECTION PAGE

IDENTIFYING YOUR RADIO ....................................................3

1

RADIO MODE ...............................................................7

2

MEDIA MODE ..............................................................13

3

UCONNECT® PHONE .........................................................19

4

UCONNECT® 5.0 VOICE RECOGNITION QUICK TIPS ..............................25

5

SETTINGS MAIN MENU ......................................................35

6

MOREMAINMENU..........................................................41

7

SAFETY GUIDELINES .........................................................43

8

TABLE OF CONTENTS

1

2

3

4

5

6

7

8

IDENTIFYING YOUR RADIO

CONTENTS

䡵 IDENTIFYING YOUR RADIO................4 䡵 Uconnect® 5.0 SYSTEM ....................5

1

4 IDENTIFYING YOUR RADIO

IDENTIFYING YOUR RADIO

Key Features:

Uconnect® 5.0

• 5” Touchscreen

• Three buttons on either side of the display

• Hands-free/Bluetooth®

• SiriusXM Satellite Radio (If Equipped)

Uconnect® 5.0 SYSTEM

IDENTIFYING YOUR RADIO 5

2 — COMPASS

1 — RADIO

Push the RADIO button on the faceplate to enter Radio
Mode. The different tuner modes; AM, FM and SXM
(if equipped), can be selected by pressing the correspond­ing buttons on the touchscreen in Radio Mode.

Push the COMPASS button on the faceplate to display
the current direction of the vehicle.

3 — CLIMATE — IF EQUIPPED

If a CLIMATE button on the faceplate exists, push this
button to access the Climate Controls. If not, push the
MORE button on the faceplate then the “Settings” button
on the touchscreen.

4 — MORE

Push the MORE button on the faceplate to access addi­tional options.

5 — ENTER/BROWSE & TUNE/SCROLL

Push the ENTER/BROWSE button to accept a high­lighted selection on the screen. Rotate the TUNE/
SCROLL rotary knob to scroll through a list or tune a
radio station.

1

6 IDENTIFYING YOUR RADIO

6 — BACK

10 — MEDIA

Push the BACK button to return to a previous menu or
screen.

7 — SCREEN OFF

Push the SCREEN OFF button to turn the touchscreen
OFF. To turn the touchscreen back ON, just press the
screen.

8 — VOLUME/MUTE

Rotate the rotary knob to adjust the Volume. Push the
VOLUME/MUTE button to mute the system.

9 — PHONE

Push the PHONE button on the faceplate to access the
Uconnect® Phone feature.

Pushing the MEDIA button on the faceplate will allow
you to switch to Media mode (CD — if equipped,
USB/iPOD®, AUX, SD Card — if equipped and
Bluetooth®).

11 — SEEK UP

Press the “Seek Up”

/SEEK DOWN

and the “Seek Down” buttons
on the touchscreen to seek through radio stations in AM,
FM or SXM bands. Seek through tracks in CD
(if equipped) or iPod® modes.

RADIO MODE

CONTENTS

䡵 RADIO MODE ..........................8

▫ Volume/Mute..........................8

▫ Enter/Browse & Tune/Scroll Control .........8

▫ Seek Functions .........................8

▫ Setting Presets .........................9

2

▫ SiriusXM Satellite Radio Mode — If Equipped . .10

▫ SiriusXM All Access Package ..............10

▫ Audio ..............................11

▫ Clock Setting .........................12

8 RADIO MODE

RADIO MODE

Enter/Browse & Tune/Scroll Control

The radio is equipped with the following modes:

• AM

• FM

• SXM SiriusXM Satellite Radio (If Equipped)

Push the RADIO button on the faceplate to enter Radio
Mode. The different tuner modes; AM, FM, and SXM, can
then be selected by pressing the corresponding button on
the touchscreen in the Radio mode.

Volume/Mute

Rotate the VOLUME/MUTE rotary knob to adjust the
Volume. When the audio system is turned on, the sound
will be set at the same volume level as last played.

Push the VOLUME/MUTE button to mute the system. Push
the VOLUME/MUTE button again to unmute the system.

Turn the rotary TUNE/SCROLL control knob clockwise
to increase or counterclockwise to decrease the radio
station frequency. Push the ENTER/BROWSE button to
choose a selection.

Seek Functions

Seek Up

Press and release the “Seek Up” button on the touch­screen to tune the radio to the next listenable station or
channel.

During a Seek Up function, if the radio reaches the
starting station after passing through the entire band two
times, the radio will stop at the station where it began.

Fast Seek Up

RADIO MODE 9

Fast Seek Down

Press and hold the “Seek Up” button on the touch­screen to advance the radio through the available stations
or channels at a faster rate, the radio stops at the next
available station or channel when the button on the
touchscreen is released.

Seek Down

Press and release the “Seek Down” button on the
touchscreen to tune the radio to the next listenable station
or channel.

During a Seek Down function, if the radio reaches the
starting station after passing through the entire band two
times, the radio will stop at the station where it began.

Press and hold the “Seek Down” button on the
touchscreen to advance the radio through the available
stations or channel at a faster rate, the radio stops at the
next available station or channel when the button on the
touchscreen is released.

Setting Presets

The Presets are available for all Radio Modes, and are
activated by pressing any of the four “Preset” buttons on
the touchscreen, located at the top of the screen.

When you are receiving a station that you wish to
commit into memory, press and hold the desired num­bered button on the touchscreen for more that two
seconds or until you hear a confirmation beep.

2

10 RADIO MODE

The Radio stores up to 12 presets in each of the Radio modes.
Four presets are visible at the top of the radio screen.

Pressing the “All” button on the touchscreen will display
all of the preset stations for that mode.

• On the go — With a SiriusXM Internet Radio subscrip-

tion included with the All Access trial, you’ll get
SiriusXM on your computer, smarthphone, or tablet.

Including:

SiriusXM Satellite Radio Mode — If Equipped

SiriusXM Satellite Radio uses direct satellite-to-receiver
broadcasting technology to provide clear, coast to coast
radio content. SiriusXM is a subscription based service.

SiriusXM All Access Package

All satellite radio equipped vehicles come with a one year
trial to the Sirius All Access package, providing over 160
channels of the best programming for all the places life takes
you.

• In your vehicle — You’ll get every channel available on
your radio, including all the premium programming
like Howard Stern, every NFL® game, every MLB®
game, every NASCAR® race, Oprah Radio and more.

• A huge On Demand catalog.

• Xtra Channels featuring SiriusXM Latino — A collec-

tion of Spanish-language channels.

• MySXM — Allowing you to personalize your favorite
music channels.

Go to siriusxm.com/getallaccess for more information.
SiriusXM services require subscriptions, sold separately
after the 12-month trial included with your new vehicle
purchase. If you decide to continue your service at the

end of your trial subscription, the plan you choose will
automatically renew and bill at then-current rates
until you call SiriusXM at 1-866-635-2349 to cancel.

See SiriusXM Customer Agreement for complete terms at
www. siriusxm.com. All fees and programming subject to
change. Our satellite service is available only to those at
least 18 and older in the 48 contiguous USA and D.C. Our
SiriusXM satellite service is also available in PR (with
coverage limitations). Our Internet radio service is avail­able throughout our satellite service area and in AK and
HI. © 2013 SiriusXM Radio Inc. Sirius, XM and all related
marks and logos are trademarks of Sirius XM Radio Inc.
Service available in Canada; see www.siriuscanada.ca.

This functionality is only available for radios equipped
with a Satellite receiver. To receive satellite radio, the
vehicle needs to be outside with a clear view to the sky.

If the touchscreen shows “Acquiring Signal”, you may
have to change the vehicle’s position to receive a signal.
In most cases, the satellite radio does not receive a signal
in underground parking garages or tunnels.

RADIO MODE 11

Audio

1. Push the SETTINGS button on the right side of the

radio faceplate. If the settings button is not present,
push the MORE button on the faceplate then the
“Settings” button on the touchscreen.

2. Scroll down and press the “Audio” button on the

touchscreen to open the Audio menu.

3. The Audio Menu shows the following options for you

to customize your audio settings:

• Equalizer — Press the “Equalizer” button on the
touchscreen to adjust the Bass, Mid and Treble. Use
the “+” or “–” buttons on the touchscreen to adjust
the equalizer to your desired settings. Press the
“Back Arrow” button on the touchscreen when done.

2

12 RADIO MODE

• Balance/Fade —

Press the “Balance/Fade” button on
the touchscreen to adjust the sound from the speakers.
Use the “arrow” button on the touchscreen to adjust the
sound level from the front and rear or right and left side
speakers. Press the Center “C” button on the touch­screen to reset the balance and fade to the factory
setting. Press the “Back Arrow” button on the touch­screen when done.

• Speed Adjustable — Press the “Speed Adjusted
Volume” button on the touchscreen to select between
OFF, 1, 2 or 3. This will decrease the radio volume
relative to a decrease in vehicle speed. Press the
“Back Arrow” button on the touchscreen when done.

• Loudness — Press the “Loudness” button on the
touchscreen to select the Loudness feature. When
this feature is activated it improves sound quality at
lower volumes.

Clock Setting

1. If a SETTINGS button on the right side of faceplate
exists, push this button. If not, push the MORE button
on the faceplate then the “Settings” button on the
touchscreen.

2. Select the “Clock and Date” button on the touchscreen.

3. Next, select “Set Time” to change the time.

4. Select “Set Date” to change the date.

5. To set the time, select the “Seek Up”
Down”

arrows as appropriate. Select “12 hrs vs

or “Seek

24 hrs”, “AM” or “PM” or select the “Time Zones” (if
equipped).

6. Select “Done” when complete.

CONTENTS

MEDIA MODE

䡵 MEDIA MODE .........................14

▫ Common Media Functions ................14

▫ Disc Mode — If Equipped ................16

▫ USB/iPod® Mode ......................17

▫ AUX Mode ...........................17

▫ Bluetooth® Mode ......................18

3

14 MEDIA MODE

MEDIA MODE

Media Mode is entered by pushing the MEDIA button
located on the faceplate. Once in Media Mode, press the
“Source” button on the touchscreen and the desired mode
button on the touchscreen. Disc — If Equipped, USB, SD
Card — If Equipped, AUX and Bluetooth® — If Equipped,
are the Media sources available. When available, you can
select the “Browse” button on the touchscreen to be given
these options:

• Now Playing

• Artists

• Albums

• Genres

• Songs

• Playlists

• Folders

You can press the “Source,” “Pause/Play” or the “Info”
button on the touchscreen for artist information on the
current song playing.

Common Media Functions

Seek Up /Seek Down

Press and release the “Right Arrow” button on the
touchscreen for the next selection. Press and release the
“Left Arrow”

button on the touchscreen to return to
the beginning of the current selection, or return to the
beginning of the previous selection if the Disc is within
the first second of the current selection.

Fast Seek Up

Press and hold the “Right Arrow” button on the
touchscreen and the desired mode will begin to fast
forward through the current track until the button on the
touchscreen is released.

Fast Seek Down

MEDIA MODE 15

Shuffle

Press and hold the “Left Arrow” button on the
touchscreen and the desired mode will begin to rewind
through the current track until the button on the touch­screen is released.

Source

Press the “Source” button on the touchscreen to select the
desired audio source, Disc — If Equipped, USB, SD —
If Equipped, AUX and Bluetooth® — If Equipped. This
screen will time out after a few seconds and return to the
main radio screen if no selection is made.

Info

Press the “Info” button on the touchscreen to display the
current track information. Press the “X” button on the
touchscreen to cancel this feature.

Press the “Shuffle” button on the touchscreen to play the
selections on the USB/iPod® device in random order to
provide an interesting change of pace. Press the “Shuffle”
button on the touchscreen a second time to turn this
feature off.

Audio

Refer to “Operating Instructions — Radio Mode” for
adjusting the audio settings.

Repeat

Press the “Repeat” button on the touchscreen to repeat
the song selection. To cancel repeat, press the “Repeat”
button on the touchscreen a second time.

3

16 MEDIA MODE

Disc Mode — If Equipped

If equipped, your vehicle may have a remote Disc player
located in the center console storage bin.

Disc Mode is entered by either inserting a CD/Disc or by
pushing the MEDIA button on the faceplate. Once in
Media Mode, press the “Source” button on the touch­screen and select “Disc.”

Inserting Compact Disc

Gently insert one Disc into the Disc player with the Disc
label following the illustration indicated on the player.
The Disc will automatically be pulled into the Disc player
and the Disc icon will illuminate on the radio display. If a
Disc does not go into the slot more than 1.0 in (2.5 cm), a
Disc may already be loaded and must be ejected before a
new Disc can be loaded.

If you insert a Disc with the ignition ON and the radio
ON, the unit will switch to Disc mode and begin to play
when you insert the Disc. The display will show the track
number and index time in minutes and seconds. Play will
begin at the start of track 1.

Browse

Press the “Browse” button on the touchscreen to scroll
through and select a desired track on the Disc. Press the
“Exit” button on the touchscreen if you wish to cancel the
browse function.

Eject Button — Ejecting a Disc

Push the EJECT button to eject the Disc. If you have
ejected a Disc and have not removed it within 10 seconds,
it will be reloaded. If the Disc is not removed, the radio
will reinsert the Disc but will not play it.

A Disc can be ejected with the radio and ignition OFF.

USB/iPod® Mode

MEDIA MODE 17

Browse

USB/iPod® Mode is entered by either inserting a USB
Jump Drive or iPod® cable into the USB port, or by
pushing the MEDIA button located on the faceplate.
Once in Media Mode, press the “Source” button on the
touchscreen and select “USB/iPod.”

Inserting USB/iPod® Device

Gently insert the USB/iPod® device into the USB Port.
If you insert a USB/iPod® device with the ignition ON,
the unit will switch to USB/iPod® mode and begin to
play when you insert the device. The display will show
the track number and index time in minutes and seconds.
Play will begin at the start of track 1.

Press the “Browse” button on the touchscreen to select
Artist, Albums, Genres, Songs, Playlists or Folders from the
USB/iPod® device. Once the desired selection is made you
can chose from the available media by pressing the button
on the touchscreen. Press the “Exit” button on the touch­screen if you wish to cancel the browse function.

AUX Mode

AUX Mode is entered by inserting a AUX device using a
stereo cable with a 3.5 mm audio jack into the AUX port,
or by pushing the MEDIA button located left of the
display. Once in Media Mode, press the “Source” button
on the touchscreen and select “AUX.”

3

18 MEDIA MODE

Inserting Auxiliary Device

Bluetooth® Mode

Gently insert the Auxiliary device cable into the AUX
Port. If you insert a Auxiliary device with the ignition
ON, the unit will switch to AUX mode and begin to play
when you insert the device cable.

Controlling The Auxiliary Device

The control of the Auxiliary device (e.g., selecting play­lists, play, fast forward, etc.) cannot be provided by the
radio; use the device controls instead. Adjust the volume
with the VOLUME/MUTE rotary knob, or with the
volume of the attached device.

The vehicle radio unit is acting as the amplifier for audio
output from the Auxiliary device. Therefore if the volume
control on the Auxiliary device is set too low, there will be
insufficient audio signal for the radio unit to play the
music on the device.

Bluetooth® Streaming Audio (BTSA) or Bluetooth®
Mode is entered by pairing a Bluetooth® device contain­ing music to the Uconnect® system.

Before proceeding, the Bluetooth® device must be paired
with the Uconnect® Phone to communicate with the
Uconnect® system.

See the “Pairing Procedure” in this manual for further
details.

Once the Bluetooth® device is paired to the Uconnect®
system, push the MEDIA button located on the left side
of the display. Once in Media Mode, press the “Source”
button on the touchscreen and select “Bluetooth.”

NOTE: For mobile phone compatibility and pairing
instructions, please visit UconnectPhone.com.

CONTENTS

Uconnect® PHONE

䡵 Uconnect® PHONE ......................20

▫ Pairing A Phone .......................20

▫ Phonebook Download — Phonebook Transfer

From Mobile Phone.....................22

▫ Making A Phone Call ...................23

▫ Receiving A Call — Accept (And End) .......23

▫ Mute (Or Unmute) Microphone During Call . . .23

4

▫ Transfer Ongoing Call Between Handset And

Vehicle ..............................23

▫ Changing The Volume ...................23

20 Uconnect® PHONE

Uconnect® PHONE

Pairing A Phone

The Uconnect® Phone is a voice-activated, hands-free,
in-vehicle communications system with Voice Command
Capability (see Voice Command section).

The Uconnect® Phone allows you to dial a phone num­ber with your mobile phone using simple voice com­mands.

NOTE: The Uconnect® Phone requires a mobile phone
equipped with the Bluetooth® Hands-Free Profile.
To check mobile phone compatibility please visit
UconnectPhone.com.

For Uconnect® customer support:

• U.S. residents - visit UconnectPhone.com or call
1-877-855-8400

• Canadian residents - call 1-800-465-2001 (English) or
1-800-387-9983 (French)

To use the Uconnect® Phone feature, you must first pair
your Bluetooth® phone with the Uconnect® system.
Refer to UconnectPhone.com for the pairing procedure
unique to your mobile phone.

Start Pairing Procedure

1. Activate the Bluetooth® on your mobile phone.

2. Push the PHONE button on the faceplate.

NOTE: If no phone is paired with the system, the display
shows a dedicated screen.

3. Press the “Yes” button on the touchscreen to start the
pairing procedure. Search for the Uconnect® device on
the mobile phone (if No is selected, the Phone main
screen is displayed).

4. When prompted by the mobile phone, use its key­board to enter the PIN code shown on the system
display or confirm on the mobile phone the PIN
displayed.

Uconnect® PHONE 21

NOTE: The priority is determined according to the order
of connection for mobile phones which are not set as
favorite. The last phone connected will have the highest
priority.

NOTE: During the pairing stage a screen is displayed
indicating the progress of the operation.

• From the Phone screen you can always pair a mobile

phone. Press the “Settings” button then press the “Add
Device” button on the touchscreen and proceed as
described above.

• If the pairing procedure is completed successfully, a

screen is displayed. Press “Yes” to the question to pair
the mobile phone as favorite (the mobile phone will
have priority on all other mobile phones that will be
paired later on). If no other devices are paired, the
system will consider the first associated device as
favorite.

For assistance in pairing your phone, contact Uconnect®
customer support:

• U.S. residents - visit UconnectPhone.com for phone
compatibility, pairing instructions and details or call
1-877-855-8400

• Canadian residents - call 1-800-465-2001 (English) or
1-800-387-9983 (French)

4

22 Uconnect® PHONE

Phonebook Download — Phonebook Transfer
From Mobile Phone

If equipped and specifically supported by your phone,
Uconnect® Phone will ask you if you want to download
names (text names) and number entries from your mobile
phone’s phonebook. Specific Bluetooth® Phones with
Phone Book Access Profile may support this feature. See
UconnectPhone.com for supported phones.

NOTE:

• A maximum of 1000 entries per phone will be down­loaded and updated every time a phone is connected
to the Uconnect® Phone.

Depending on the maximum number of entries down-

•

loaded, there may be a short delay before the latest
downloaded names can be used. Until then, if available,
the previously downloaded phonebook is available for use.

• Only the phonebook of the currently connected mobile
phone is accessible.

• Download and update, if supported, begins as soon as
the Bluetooth® wireless phone connection is made to
the Uconnect® Phone, for example, after you start the
vehicle.

• You may be asked for permission to initiate the phone­book download.

• Only the mobile phone’s phonebook is downloaded.
SIM card phonebook is not part of the Mobile
phonebook.

• This downloaded phonebook cannot be edited or
deleted on the Uconnect® Phone. These can only be
edited on the mobile phone. The changes are trans­ferred and updated to Uconnect® Phone on the next
phone connection.

Making A Phone Call

1. Push the PHONE button on the steering wheel.

2. After the BEEP, say “dial” (or “call” a full name or
phone number).

Receiving A Call — Accept (And End)

1. When an incoming call rings or is announced on
Uconnect®, push the PHONE button on the faceplate.

2. To end a call, push the PHONE button on steering
wheel or the PHONE button on the faceplate.

Mute (Or Unmute) Microphone During Call

1. During a call, push the VOICE COMMAND button on
the steering wheel.

2. After the BEEP, say “mute” (or “mute off.”)

Uconnect® PHONE 23

Transfer Ongoing Call Between Handset And
Vehicle

1. During a call, push the VOICE COMMAND button on
the steering wheel.

2. After the BEEP, say “transfer call.”

Changing The Volume

4

1. Start a dialogue by pushing the PHONE button on the
faceplate, then adjust the volume during a normal call.

2. Use the radio ON/VOLUME rotary knob to adjust the
volume to a comfortable level while the Uconnect®
system is speaking. Please note the volume setting for
Uconnect® phone is different than the audio system
volume setting.

Uconnect® 5.0 VOICE RECOGNITION QUICK TIPS

CONTENTS

䡵 Uconnect® VOICE RECOGNITION ...........26

▫ Introducing Uconnect® ..................26

▫ Get Started ...........................26

▫ Basic Voice Commands ..................28

▫ Radio ...............................29

▫ Media ..............................30

▫ Phone ..............................31

▫ Voice Text Reply .......................32

▫ Additional Information ..................33

5

26 Uconnect® 5.0 VOICE RECOGNITION QUICK TIPS

Uconnect® VOICE RECOGNITION
Introducing Uconnect®

Start using Uconnect® Voice Recognition with these
helpful quick tips. It provides the key Voice Commands
and tips you need to know to control your Uconnect® 5.0
system.

Key Features:

• 5” touchscreen

• Three buttons on either side of the display

Get Started

1. Visit UconnectPhone.com to check mobile device and
feature compatibility and to find phone pairing in­structions.

2. Reduce background noise. Wind and passenger con­versations are examples of noise that may impact
recognition.

3. Speak clearly at a normal pace and volume while
facing straight ahead. The microphone is positioned
on the rearview mirror and aimed at the driver.

4. Each time you give a Voice Command, you must first
push either the VR or PHONE button, wait until after
the beep, then say your Voice Command.

5. You can interrupt the help message or system prompts
by pushing the VR or PHONE button and saying a
Voice Command from current category.

All you need to control your Uconnect® system with
your voice are the buttons on your steering wheel.

Uconnect® 5.0 VOICE RECOGNITION QUICK TIPS 27

5

1 — Push To Begin Radio Or Media Functions
2 — Push To Initiate, Answer, Or End A Phone Call, Send Or
Receive A Text

28 Uconnect® 5.0 VOICE RECOGNITION QUICK TIPS

Basic Voice Commands

The basic Voice Commands below can be given at any
point while using your Uconnect® system.

1 — Push To Initiate Or To Answer A Phone Call, Send Or
Receive A Text
2 — Push To Begin Radio Or Media Functions
3 — Push To End Call

Push the VR button

. After the beep, sayѧ

• Cancel to stop a current voice session

• Help to hear a list of suggested Voice Commands

• Repeat to listen to the system prompts again

Notice the visual cues that inform you of your voice
recognition system’s status. Cues appear on the touch­screen.

Radio

Use your voice to quickly get to the AM, FM or SiriusXM
Satellite Radio® stations you would like to hear. (Subscrip­tion or included SiriusXM Satellite Radio trial required.)

Push the VR button . After the beep, sayѧ

• Tune to ninety-five-point-five FM

Uconnect® 5.0 VOICE RECOGNITION QUICK TIPS 29

• Tune to Satellite Channel Hits 1

TIP

At any time, if you are not sure of what to say or want to
learn a Voice Command, push the VR button

and say
“Help.” The system will provide you with a list of
commands.

5

30 Uconnect® 5.0 VOICE RECOGNITION QUICK TIPS

Media

TIP

Uconnect® offers connections via USB, SD, Bluetooth®
and Auxiliary ports (If Equipped). Voice operation is only
available for connected USB and iPod® devices. (Remote
CD player optional and not available on all vehicles.)

Push the VR button

. After the beep, say one of the
following commands and follow the prompts to switch
your media source or choose an artist.

• Change source to Bluetooth®

• Change source to iPod®

• Change source to USB

• Play artist Beethoven; Play album Greatest Hits; Play

song Moonlight Sonata; Play genre Classical

Press the “Browse” button on the touchscreen to see all of
the music on your iPod® or USB device. Your Voice
Command must match exactly how the artist, album,
song and genre information is displayed.

Phone

Uconnect® 5.0 VOICE RECOGNITION QUICK TIPS 31

TIP

Making and answering hands-free phone calls is easy
with Uconnect®. When the Phonebook button is illumi­nated on your touchscreen, your system is ready. Check
UconnectPhone.com for mobile phone compatibility and
pairing instructions.

Push the PHONE button

. After the beep, say one of

the following commands:

• Call John Smith

• Dial 123-456-7890 and follow the system prompts

• Redial (call previous outgoing phone number)

• Call back (call previous incoming phone number)

When providing a Voice Command, push the PHONE
button

and say “Call,” then pronounce the name
exactly as it appears in your phone book. When a contact
has multiple phone numbers, you can say “Call John
Smith work.”

5

32 Uconnect® 5.0 VOICE RECOGNITION QUICK TIPS

Voice Text Reply

Uconnect® will announce incoming text messages. Push
the PHONE button

and say Listen. (Must have

compatible mobile phone paired to Uconnect® system.)

1. Once an incoming text message is read to you, push
the PHONE button

. After the beep, say... “Reply”

2. Listen to the Uconnect® prompts. After the beep,
repeat one of the pre-defined messages and follow the
system prompts.

PRE-DEFINED VOICE TEXT REPLY RESPONSES

Yes. Stuck in Traffic. See you later.

No.

Okay. Where are you? I

Call me.

I’ll call you

later.

I’m on my way.

I’m lost. Thanks.

Start without

me.

Are you there

yet?

I need

directions.

Can’t talk right

now.

I’ll be Late.

will be

<number>

minutes late.

See you in

<number> of

minutes.

TIP

Your mobile phone must have the full implementation
of the Message Access Profile (MAP) to take advantage
of this feature. For details about MAP, visit Uconnect­Phone.com. Apple iPhone® iOS6 or later supports read­ing incoming text messages only.

Additional Information

© 2013 Chrysler Group LLC. All rights reserved. Mopar®
and Uconnect® are registered trademarks and Mopar
Owner Connect is a trademark of Chrysler Group LLC.
Android is a trademark of Google Inc. SiriusXM and all
related marks and logos are trademarks of SiriusXM
Radio Inc. Yelp, Yelp logo, Yelp burst and related marks
are registered trademarks of Yelp®.

Uconnect® 5.0 VOICE RECOGNITION QUICK TIPS 33

DriveUconnect.com

Uconnect® System Support 1-877-855-8400

Mon. – Fri., 7:00 am – 12:00 am, ET

Sat., 8:00 am – 10:00 pm, ET

Sun., 9:00 am – 5:00 pm, ET

Uconnect® Access Services Support 1-855-792-4241.
Please have your Uconnect® Security PIN ready when
you call.

5

CONTENTS

SETTINGS MAIN MENU

䡵 SETTINGS MAIN MENU ..................36

▫ Display .............................36

▫ Voice — If Equipped ....................37

▫ Clock & Date .........................37

▫ Safety/Assistance — If Equipped ...........37

▫ Lights ..............................37

▫ Auto-On Comfort — If Equipped ...........38

▫ Doors & Locks — If Equipped .............38

▫ Heated Seats — If Equipped...............38

▫ Engine Off Options .....................38

▫ Compass Settings ......................39

▫ Audio ..............................40

▫ Phone/Bluetooth® .....................40

▫ SiriusXM Setup ........................40

6

36 SETTINGS MAIN MENU

SETTINGS MAIN MENU

Language

Push the SETTINGS button on your faceplate, if one
exists, to display the Settings Main Menu. If not, push the
MORE button on the faceplate then the “Settings” button
on your touchscreen. The Settings Main Menu contains
the following options:

Display

Press the “Display” button on the touchscreen.

Display Mode

When in this display you may select one of the auto display
settings. To change Mode status, press and release “Auto” or
“Manual” buttons and then select “Done.”

When in this display, you may select one of three languages
for all display nomenclature. Press “Language” on the
touchscreen. Press the “Back Arrow” button on the touch­screen to return to the previous menu.

Units

When in this display, you may choose between US and
Metric units of measure to be displayed in the EVIC.
Press “US” or “Metric.” Press the “Back Arrow” button
on the touchscreen to return to the previous menu.

Voice Resp. Length — If Equipped

When in this display, you may change the Voice Re­sponse Length settings. To change the Voice Response
Length, press the “Brief” or “Detailed” button on the
touchscreen. Press the “Back Arrow” button on the
touchscreen to return to the previous menu.

Touchscreen Beep

SETTINGS MAIN MENU 37

Safety/Assistance — If Equipped

When in this display, you may turn on or shut off the
sound heard when a touchscreen button is pressed. Press
the “Touchscreen Beep” button on the touchscreen and
select either On or Off. Press the “Back Arrow” button on
the touchscreen to return to the previous menu.

Voice — If Equipped

When in this display, you may change the Voice Re­sponse Length settings. To change the Voice Response
Length, press the “Brief” or “Detailed” button on the
touchscreen. Press the “Back Arrow” button on the
touchscreen to return to the previous menu.

Clock & Date

Refer to the “Radio” section for details.

Refer to “Understanding Your Instrument Panel/
Uconnect® System” section in your vehicle Owner’s
Manual for details.

Lights

When this feature is selected, it allows the adjustment of
the amount of time the headlights remain on after the
engine is shut off. To change the Headlights Off Delay
setting, press the “Headlights Off Delay” button on the
touchscreen, and choose either 0 sec, 30 sec, 60 sec or 90
seconds. Press the “Back Arrow” button on the touch­screen to return to the previous menu.

6

38 SETTINGS MAIN MENU

Auto-On Comfort — If Equipped

Heated Seats — If Equipped

When this feature is selected, the driver’s heated and/or
ventilated seats and heated steering wheel (if equipped)
are activated based on the outside temp. To make your
selection, press the “Off”, “Remote Start”, or “All Starts”
buttons on the touchscreen. (All Starts is functional with
remote start or key start.) Press the “Back Arrow” button
on the touchscreen to return to the previous screen.

Doors & Locks — If Equipped

Refer to “Understanding Your Instrument Panel/
Uconnect® System” section in your vehicle Owner’s
Manual for details.

Refer to “Understanding The Features Of Your Vehicle/
Seats” section in your vehicle Owner’s Manual for de­tails.

Engine Off Options

When this feature is selected, the driver can choose to
have the headlights remain on for 0, 30, 60, or 90 seconds
when exiting the vehicle. To change the Headlight Off
Delay status, select from “0 sec.,” ”30 sec.,” “60 sec.,” or
“90 sec.” buttons on the touchscreen to select your
desired time interval. Press the “Back Arrow” button on
the touchscreen to return to the previous menu.

Compass Settings

Compass Variance

Compass Variance is the difference between Magnetic
North and Geographic North. To compensate for the
differences the variance should be set for the zone where
the vehicle is driven, per the zone map. Once properly
set, the compass will automatically compensate for the
differences, and provide the most accurate compass
heading.

SETTINGS MAIN MENU 39

NOTE: Keep magnetic materials away from the top of the
instrument panel, such as iPod’s, Mobile Phones, Laptop
Computers and Radar Detectors. This is where the com­pass module is located, and it can cause interference with
the compass sensor, and it may give false readings.
Compass will not show if vehicle has GPS activated.

6

Compass Variance Map

40 SETTINGS MAIN MENU

Compass Calibration

Audio

Press the “Compass Calibration” button on the touch­screen to change this setting. This compass is self­calibrating, which eliminates the need to manually reset
the compass. When the vehicle is new, the compass may
appear erratic and it may need to be calibrated. You may
also calibrate the compass by pressing the “Yes” button
on the touchscreen popup and completing one or more
360-degree turns (in an area free from large metal or
metallic objects) until the CAL indicator displayed in the
EVIC turns off. The compass will now function normally.

Refer to the “Operating Instructions/Radio” section in
this manual for details.

Phone/Bluetooth®

Refer to the “Uconnect® Phone” section in this manual
for details.

SiriusXM Setup

Refer to the “Radio” section in this manual for details.

MORE MAIN MENU

CONTENTS

䡵 MORE MAIN MENU .....................42 ▫ Clock ...............................42

7

42 MORE MAIN MENU

MORE MAIN MENU

Push the MORE button located on the faceplate to
display the More Main Menu. The More Main Menu may
contain the following options:

Clock

Refer to the “Uconnect® 5.0/Radio Mode” section in this
manual for details.

CONTENTS

SAFETY GUIDELINES

䡵 SAFETY GUIDELINES ....................44

▫ Safe Usage Of The Uconnect® System........45

▫ Touchscreen ..........................45

▫ Disc Drive ...........................46

▫ FCC Declaration .......................46

▫ Safety Information ......................47

8

44 SAFETY GUIDELINES

SAFETY GUIDELINES

Please read and follow these safety precautions. Failure
to do so may result in injury or property damage.

WARNING!

ALWAYS drive safely with your hands on the
steering wheel. You have full responsibility and
assume all risks related to the use of the
Uconnect® features and applications in this ve­hicle. Only use Uconnect® when it is safe to do so.
Failure to do so may result in an accident involv­ing serious injury or death.

Ensure all persons read this manual carefully before
using the system. It contains instructions on how to use
the system in a safe and effective manner.

• Glance at the screen only when safe to do so. If
prolonged viewing of the screen is required, park in a
safe location and set the parking brake.

• Stop use immediately if a problem occurs. Failure to
do so may cause injury or damage to the product.
Return it to your authorized dealer to repair.

• Ensure the volume level of the system is set to a level
that still allows you to hear outside traffic and emer­gency vehicles.

Safe Usage Of The Uconnect® System

SAFETY GUIDELINES 45

Touchscreen

• Read all instructions in this manual carefully before
using your system to ensure proper usage!

• Your system is a sophisticated electronic device. Do
not let young children use your system.

• Permanent hearing loss may occur if you play your
music or the system at loud volumes. Exercise caution
when setting the volume on your system.

• Keep drinks, rain and other sources of moisture away
from your system. Besides damage to your system,
moisture can cause electric shocks as with any elec­tronic device.

NOTE: Many features of this system are speed depen­dent. For your own safety, it is not possible to use some
of the touchscreen features while the vehicle is in motion.

• Do not press the touchscreen with any hard or sharp
objects (pen, USB stick, jewelry, etc.) which could
scratch the touchscreen surface!

• Do not spray any liquid or caustic chemicals directly
on the screen! Use a clean and dry micro fiber lens
cleaning cloth in order to clean the touchscreen.

• If necessary, use a lint-free cloth dampened with a
cleaning solution, such as isopropyl alcohol or an
isopropyl alcohol and water solution ratio of 50:50. Be
sure to follow the solvent manufacturer’s precautions
and directions.

8

46 SAFETY GUIDELINES

Disc Drive

• Do not insert any damaged, warped, scratched or dirty
Discs into the Disc Player.

• Discs that have been modified with an adhesive label
should not be used in the Disc Player.

• Do not insert more than one Disc at a time into the
drive slot.

FCC Declaration

This device complies with Part 15 of the FCC Rules and
with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2)
this device must accept any interference received, includ­ing interference that may cause undesired operation.

NOTE:

This equipment has been tested and found to
comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation.

If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following
measures:

• Increase the separation between the equipment and

receiver.

• Consult the dealer or an experienced radio technician

for help.

Safety Information

Exposure To Radio Frequency Radiation

The radiated output power of the this internal wireless
radio is far below the FCC radio frequency exposure
limits. Nevertheless, the wireless radio shall be used in
such a manner that the radio is 20 cm (200 mm) or further
from the human body.

The internal wireless radio operates within guidelines
found in radio frequency safety standards and recom­mendations, which reflect the consensus of the scientific
community.

SAFETY GUIDELINES 47

The radio manufacturer believes the internal wireless
radio is safe for use by consumers. The level of energy
emitted is far less than the electromagnetic energy emit­ted by wireless devices such as mobile phones. However,
the use of wireless radios may be restricted in some
situations or environments, such as aboard airplanes.
If you are unsure of restrictions, you are encouraged to
ask for authorization before turning on the wireless
radio.

8

First Edition
Uconnect® 5.0

Chrysler Group LLC
Printed in the USA

15UC5-526-AA