Chronomite M-15L/277-MM, M-20L/120-MM, M-20L/208-MM, M-20L/240-MM, M-20L/277-MM Get Started
...
® ™
M-15L / 277-MM 15 277 4150 0.35 35 28 M-20L / 120-MM 20 120 2400 0.35 20 - M-20L / 208-MM 20 208 4160 0.35 36 28 M-20L / 240-MM 20 240 4800 0.35 41 33 M-20L / 277-MM 20 277 5540 0.35 47 38 M-30L / 120-MM 30 120 3600 0.35 31 25 M-30L / 208-MM 30 208 6240 0.35 53 43 21
M-30L / 240-MM 30 240 7200 0.35 61 49 25
M-30L / 277-MM 30 277 8320 0.35 71 57 28
M-40L / 208-MM 40 208 8320 0.35 71 57 28
M-40L / 240-MM 40 240 9600 0.35 82 66 33
TEMP RISE @
1.00 GPM
TEMP RISE @
2.00 GPM
MODEL AMPS VOLTS WATTS
TEMP RISE @
0.80 GPM
ACTIVATION
GPM
INSTANT-FLOW MICRO MIX - LOW FLOW
APPLICATION: commercial, industrial,
public lavatories, kitchen/bar sink
PRODUCT FEATURES
â The combination of any Chronomite IAPMO certified
microprocessor instantaneous water heater and the
Chronomite IAPMO certified mixing valve assembly AP-12,
when installed per the instructions, complies with ASSE
1070-2004. Reference IAPMO R&T Certificate no. 7257.
Regulation pertaining to limiting risk of scalding.
â Uses a digital microprocessor for temperature control
Ultra quick response times for temperature variations 120 times per second. Microprocessor use is the most energy
efficient means of heating water
â Unlimited hot water
â Saves water and energy - 99% energy efficient
â Vandal resistant rugged cast aluminum housing
â Works with low flow application
â Space saving compact size:
6-1/4" (H) x 9-5/8" x 2-3/4"
â Meets applicable building codes including
ADA, UL, IAPMO, UPC.
â Environmentally friendly
â Made in the U.S.A.
Get Started www.mgispecbuilder.comConfigure products and create specs with ease.
ELECTRIC TANKLESS WATER HEATER - POINT OF USE
Instant Flow® Micro Mix - Low Flow
GUIDE SPECIFICATION
Tankless Water Heater shall be a Chronomite Laboratories
Model
M - ___L / _____- MM
AMPS VOLTS
_____
OPTION
Chronomite Instant Flow® Micro Mix - Low Flow models are
manufactured to provide reliable point-of-use hot water at 0.4
GPM with a minimum pressure of 25 PSI.
The AP-12 valve assembly consists of IAPMO certified mixing
valve, appropriate piping and fittings. Reference IAPMO R & T
certificate #7257
Housing is fabricated from rugged cast aluminum alloy.
Element assembly is fabricated from Celcon plastic.
with Amps and Volts
to heat 0.4 GPM to a preset temperature of 104°F.
Unit shall be provided with, microprocessor, Celcon
waterways, Nichrome heating coils, and an IAPMO certified
AP-12 Mixing Valve Assembly meeting ASSE 1070-2004
compliancy. Hot water storage vessel and simple analog
temperature controller are expressly prohibited.
Coils are Nichrome.
Faucet flow control and compression fittings are supplied
with each unit.
Member of
U.S.Green
Building Council
Water
Conserving
Product
Made in
the USA
For the model being selected, please place the corresponding
OPTIONAL HOUSING FINISH
m PA 765 ABS (P)
m Satin Finish Stainless Steel (SS)
m High Polish Finish Stainless Steel (SSP)
e.g. Model M-30L/120-MM with 30 Amps, 120 Volts heat
0.4 GPM to preset temperature of 104°F.
amps and volts values in the Guide Specifications to the right.
Complies
with
Standards
Federal
Public Law
111-380
(No Lead)
for:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
17 45 1 Hu rl ey St. :: Ci ty of In du st ry, CA 9 17 44
Ph on e 80 0- 44 7- 49 62 :: 62 6- 93 7- 42 70
Fa x 62 6- 93 7- 42 79 :: ww w.c hr on om it e. co m
MM-LF 09/06/18
Get Started www.mgispecbuilder.comConfigure products and create specs with ease.
ELECTRIC TANKLESS WATER HEATER - POINT OF USE
® ™
INSTANT-FLOW MICRO MIX - LOW FLOW
TECHNICAL DIMENSIONS
INSTANT-FLOW® MICRO MIX™ - LOW FLOW
Dimensions: 6-1/4" (H) x 9-5/8" x 2-3/4"
Weight: 6 lbs.
Materials: Rugged cast aluminum housing, Celcon
plastic element assembly with Nichrome
coils and AP-12 mixing valve assembly
Housing Color: White
Minimum Operating Flow Rate: 0.35 GPM
Minimum Operating Pressure: 25 PSI
Maximum Operating Pressure: 80 PSI
Maximum Pressure: 150 PSI
Maximum Operating Temperature: 160°F
Listing: UL, IAPMO, UPC, ADA, ETL
!
GENERAL NOTES:
!
The microprocessor adjusts the heater's power for variations in flow
rates, inlet water temperature and pressure to assure the selected
factory preset water temperature.
!
240V models when operated at 220V will have approximately a 15%
wattage decrease.
INSTALLATION DIAGRAM
1/4"
17-1/4"
9-5/8"
1/4"
5-3/4"
AP-12 Mixing
Valve Assembly
Front Service Panel
Electrical
Knock-Out
ø 3/16", 4 Mounting Holes
Behind Unit
1-5/16"
ø 1" Access Hole
2-3/4"
1-1/8"
1-1/8"
10-1/8"
!
Microprocessor limits temperature increase according to the pre
selected temperature.
!
The combination of Chronomite’s IAPMO certified instantaneous
water heater and the Chronomite’s IAPMO certified valve assembly
AP-12, when installed per the instructions, complies with ASSE
1070. Reference: IAPMO R&T Certificate no. 7257.
WIRING CONNECTION
Note: Heater to be
installed below the level
of all hot water outlets
serviced by the heater
Hot or
3/8"
Cold Water
Faucet Feed
3/8" Hot
Mounting
Flanges (4)
Micro Mix
Heater
J-Box
Water Faucet
Feed
5/8" x 3/8" x 3/8"
Three Way Angle
Stop Valve
3/8" Cold Water Inlet
Compression Fittings (2)
Chronomite Laboratories assumes no responsibility for use of void or suspended data. © Copyright Chronomite Laboratories, Inc.
Member of Morris Group International, City of Industry, CA Please visit www.chronomite.com for most current specifications.
Company_______________________________________________________________________________________________________
Model Number & Options_____________________________________________________________________Quantity_______________
Contact_________________________________________________Title____________________________________________________
Signature
& APPROVAL FOR
MANUFACTURING
(Approval for
Manufacturing)__________________________________________________________________Date ____________________________
SELECTION SUMMARY
Neutral
Conduit
Refer to local
code for wire size
ATTENTION:
Unit must be hard wired.
NOTE: Heaters are single phase.
All tests are measured at
the output of the heater.
Acorn Family of Companies
PH. 800-447-4962
626-937-4270
FAX 626-937-4279
www.chronomite.com
Hot or
Neutral
"GRD" is
earth
ground.
MM-LF 09/06/18
Loading...