Chronomite M-15L/277, M-20L/120, M-20L/208, M-20L/240, M-20L/277 User Manual
...
®
M-15L / 277 15 277 4150 0.35 35 28 24
M-20L / 120 20 120 2400 0.35 20 - M-20L / 208 20 208 4160 0.35 36 28 24
M-20L / 240 20 240 4800 0.35 41 33 27
M-20L / 277 20 277 5540 0.35 47 38 32
M-30L / 120 30 120 3600 0.35 31 25 20
M-30L / 208 30 208 6240 0.35 53 43 36
M-30L / 240 30 240 7200 0.35 61 49 41
M-30L / 277 30 277 8320 0.35 71 57 47
M-40L / 208 40 208 8320 0.35 71 57 47
M-40L / 240 40 240 9600 0.35 82 66 55
M-40L / 277 40 277 11080 0.35 95 76 63
TEMP RISE @
1.00 GPM
TEMP RISE @
1.20 GPM
MODEL AMPS VOLTS WATTS
TEMP RISE @
0.80 GPM
ACTIVIATION
GPM
INSTANT-FLOW MICRO - LOW FLOW
APPLICATION: commercial, industrial,
residential, public lavatories, kitchen/bar sink
PRODUCT FEATURES
Uses a digital microprocessor for
â
temperature control
Ultra quick response times for temperature variations 120 times per second. Microprocessor use is the most
energy efficient means of heating water
Unlimited hot water
â
Ideal for sensor /hands-free faucets with the
â
104°F factory preset setting; no mixing valve
needed
Saves water and energy - 99% energy efficient
â
Meet all CAL GREEN low flow requirements
â
Vandal resistant rugged cast aluminum housing
â
Space saving compact size:
â
6-1/4" (H) x 9-5/8" x 2-3/4"
Meets applicable building codes including
â
ADA, UL, IAPMO, UPC.
Environmentally friendly
â
Made in the U.S.A.
â
Chronomite Instant-Flow Micro - Low Flow models are
manufactured to provide reliable point-of-use hot water. There
is no pressure and temperature relief valve needed (unless
required by code), saving time and money on installation.
Housing is fabricated from
Element assembly is fabricated from Celcon plastic.
Heating coils are nichrome.
Faucet flow controls and compression fittings are supplied
with each unit.
Member of
U.S.Green
Building Council
For the model being selected, please place the corresponding
amps and volts values in the Guide Specifications to the right.
®
rugged cast aluminum alloy.
Water
Conserving
Product
Made in
the USA
Instant-Flow Micro - Low Flow
®
GUIDE SPECIFICATION
Tankless Water Heater shall be a Chronomite
Laboratories Model
M - _____L / ______
x 100 WATTS VOLTS
with Amps and Volts
to heat to a preset temperature of:
m m m
104°F 110°F Other temperature
m
120°F
(Meets health code)
Unit shall be provided with Celcon waterways, and
Nichrome heating coils.
Temperature controlled by microprocessor.
OPTIONS
m
PA 765 ABS Housing (P)
m
Satin Finish Stainless Steel Housing (SS)
m
High Polish Finish Stainless Steel (SSP)
m
Pressure & Temp Relief Valve Assembly (TP)
( Meets ADA )
_____
OPTIONS
settings available upon
request (specify below)
Complies
with
Standards
Federal
Public Law
111-380
(No Lead)
for:
Downloaded from www.GadgetsGo.com, Authorized Chronomite Distributor
17 45 1 Hu rl ey St. :: Ci ty of In du st ry, CA 9 17 44
Ph on e 80 0- 44 7- 49 62 :: 62 6- 93 7- 42 70
Fa x 62 6- 93 7- 42 79 :: ww w.c hr on om it e. co m
IFM-LF 03/17/15
®
INSTANT-FLOW MICRO - LOW FLOW
TECHNICAL DIMENSIONS
INSTANT-FLOW MICRO - LOW FLOW
Dimensions: 6-1/4" (H) x 9-5/8" x 2-3/4"
Weight: 5 lbs.
Materials: Rugged cast aluminum housing
Housing Color: White
Minimum Operating Flow Rate: 0.35 GPM
Minimum Operating Pressure: 25 PSI
Maximum Operating Pressure 150 PSI
Maximum Operating Temperature: 140°F
Listing: UL, IAPMO, UPC, ADA
GENERAL NOTES:
¥
The microprocessor adjusts the heater's power for variations in flow
rates, inlet water temperature and pressure to assure the selected
factory preset water temperature.
¥
240V models when operated at 220V will have approximately a 15%
wattage decrease.
¥
120V models when operated 110V will have approximately a 15%
wattage decrease.
®
Celcon plastic element assembly
with nichrome coils
ø 3/16", 4 Mounting Holes
1/4"
2-3/4"
HOT
COLD
1/4"
5-3/4"
Chronomite Laboratories, Inc.
City of Industry, CA 91744 U.S.A.
9-5/8"
2"
3-5/16"
Front Service Panel
1-5/16"
Rear Electrical Knock-Out
ø 1" Access Hole
2-3/4"
1-1/8"
1-1/8"
10-1/8"
¥
Instant-Flow Micro is ideal for sensor/hands-free faucets with the
104°F factory preset setting temperature ; no mixing valve needed
¥
Factory setting of 110°F or above require cold water mixing at the
hand wash faucet.
¥
Microprocessor limits temperature increase according to the preselected temperature.
6-1/4"
INSTALLATION DIAGRAM
WIRING CONNECTION
Note: Heater to be
installed below the level
of all hot water outlets
serviced by the heater
3/8"
Cold Water
Faucet Feed
3/8" Hot Water Outlet
Compression
Instant-Flow
Micro Heater
J-Box
Fittings (2)
HOT
COLD
5/8" x 3/8" x 3/8"
Three Way Angle
Stop Valve
3/8" Cold Water Inlet
Mounting Flanges (4)
Chronomite Laboratories assumes no responsibility for use of void or suspended data. © Copyright Chronomite Laboratories, Inc.
Member of Morris Group International, City of Industry, CA Please visit www.chronomite.com for most current specifications.
Company_______________________________________________________________________________________________________
Hot or
Neutral
Conduit
Refer to local
code for wire size
ATTENTION:
Unit must be hard wired.
NOTE: Heaters are single phase.
All tests are measured at
the output of the heater.
Hot
"GRD" is
earth
ground.
Model Number & Options_____________________________________________________________________Quantity_______________
Contact_________________________________________________Title____________________________________________________
Signature
& APPROVAL FOR
MANUFACTURING
(Approval for
Manufacturing)__________________________________________________________________Date ____________________________
SELECTION SUMMARY
Downloaded from www.GadgetsGo.com, Authorized Chronomite Distributor
626-937-4270
FAX 626-937-4279
www.chronomite.com
IFM-LF 03/17/15
PH. 800-447-4962
Loading...