Get Started www.mgispecbuilder.comConfigure products and create specs with ease.
ELECTRIC TANKLESS WATER HEATER - POINT OF USE
®
INSTANT-FLOW MICRO - LOW FLOW
APPLICATION: commercial, industrial,
residential, public lavatories, kitchen/bar sink
PRODUCT FEATURES
â Uses a digital microprocessor for temperature control
Ultra quick response times for temperature variations 120 times per second. Microprocessor use is the most
energy efficient means of heating water
â Unlimited hot water
â Ideal for sensor /hands-free faucets with the 104°F (40°C)
factory preset setting; no mixing valve needed
â Saves water and energy - 99% energy efficient
â Meet all CAL GREEN low flow requirements
â Vandal resistant rugged cast aluminum housing
â Space saving compact size:
6-1/4" (H) x 9-5/8" x 2-3/4”
(159 (H) x 244 x 70mm)
â Meets applicable building codes including
ADA, UL, IAPMO, UPC, CSA.
â Environmentally friendly
â Made in the U.S.A.
â Field Adjustable Temperature 104-125°F (40-52°C)
(Option -ADJ)
Instant-Flow Micro - Low Flow
GUIDE SPECIFICATION
Tankless Water Heater shall be a Chronomite
Laboratories Model
M - _____L / ______
with Amps and Volts
to heat to a preset temperature of:
Chronomite Instant-Flow Micro - Low Flow models are
®
manufactured to provide reliable point-of-use hot water. There
is no pressure and temperature relief valve needed (unless
required by code), saving time and money on installation.
m m m 104°F (40°C) 110°F (43°C) Other temperature
settings available upon
request (specify below)
120°F (49°C)m
(Meets health code)
Housing is fabricated from rugged cast aluminum alloy.
Element assembly is fabricated from Celcon plastic.
Heating coils are nichrome.
Faucet flow controls are supplied with each unit. 3/8”
compression fittings are supplied (standard). Optional 1/2”
male NPT water connections available.
Made in
Member of
U.S.Green
Building Council
Water
Conserving
Product
the USA
For the model being selected, please place the corresponding
amps and volts values in the Guide Specifications to the right.
MODEL AMPS VOLTS W ATTS
M-15L / 277 15 277 4150 0.35 35 28 M-20L / 120 20 120 2400 0.35 20 - M-20L / 208 20 208 4160 0.35 36 28 M-20L / 240 20 240 4800 0.35 41 33 M-20L / 277 20 277 5540 0.35 47 38 M-30L / 120 30 120 3600 0.35 31 25 M-30L / 208 30 208 6240 0.35 53 43 21
M-30L / 240 30 240 7200 0.35 61 49 25
M-30L / 277 30 277 8310 0.35 71 57 28
M-40L / 208 40 208 8320 0.35 71 57 28
M-40L / 240 40 240 9600 0.35 82 66 33
Complies
Complies
Standards
Standards
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
LISTED TO:
UL STD 499
with
with
CERTIFIED TO:
for:
for:
CAN/CSA STD C22.2 NO. 88
Federal
Public Law
111-380
(No Lead)
Unit shall be provided with Celcon waterways, and
Nichrome heating coils.
Temperature controlled by microprocessor.
OPTIONS
m PA 765 ABS Housing (P)
Satin Finish Stainless Steel Housing (SS)m
High Polish Finish Stainless Steel (SSP)m
Pressure & Temp Relief Valve Assembly (TP)m
1/2” Male NPT (NPT08)m
Field Adjustable Temperature (ADJ)m
Disconnect Switch, Rotary 40A - Lockablem
Nema 4X (2095-1)
ACTIVATION
GPM
17 45 1 Hu rl ey St. :: Ci ty of In du st ry, CA 9 17 44
Ph on e 80 0- 44 7- 49 62 :: 62 6- 93 7- 42 70
Fa x 62 6- 93 7- 42 79 :: ww w.c hr on om it e. co m
®
AMPS VOLTS
( Meets ADA )
°F TEMPERATURE RISE @
0.80 GPM 1.00 GPM 2.00 GPM
_____
OPTIONS
IFM-LF 09/06/18
ELECTRIC TANKLESS WATER HEATER - POINT OF USE
®
INSTANT-FLOW MICRO - LOW FLOW
INSTANT-FLOW MICRO - LOW FLOW METRIC CHART
®
Get Started www.mgispecbuilder.comConfigure products and create specs with ease.
MODEL AMPS/PHASE 1 Æ VOLTAGE WATTS
M-15L/277 15 277 4150 1.3 20 15 -M-20L/120 20 120 2400 1.3 11 -- -M-20L/208 20 208 4160 1.3 20 15 -M-20L/240 20 240 4800 1.3 23 17 -M-20L/277 20 277 5540 1.3 27 20 -M-30L/120 30 120 3600 1.3 17 13 -M-30L/208 30 208 6240 1.3 30 22 11
M-30L/240 30 240 7200 1.3 34 26 13
M-30L/277 30 277 8310 1.3 40 30 15
M-40L/208 40 208 8320 1.3 40 30 15
M-40L/240 40 240 9600 1.3 46 34 17
ACTIVATION
LPM
3.00 LPM 4.00 LPM 8.00 LPM
°C TEMPERATURE RISE @
TECHNICAL DIMENSIONS
INSTANT-FLOW MICRO - LOW FLOW
Dimensions: 159 (H) x 244 x 70mm
Weight: 2.27 Kg
Materials: Rugged cast aluminum housing
Celcon plastic element assembly
with nichrome coils
Housing Color: White
Minimum Operating Flow Rate: 1.3 LPM
Minimum Operating Pressure: 172 kPa
Maximum Operating Pressure: 552 kPa
Maximum Pressure: 1034 kPa
Maximum Water Temperature: 71°C
Maximum Ambient Operating Temperature: 60°C
Listing: UL, IAPMO, UPC, ADA, ETL
GENERAL NOTES:
¥
The microprocessor adjusts the heater's power for variations in flow
rates, inlet water temperature and pressure to assure the selected
factory preset water temperature.
¥
240V models when operated at 220V will have approximately a 15%
wattage decrease.
¥
120V models when operated 110V will have approximately a 15%
wattage.
¥
Instant-Flow Micro is ideal for sensor/hands-free faucets with the
40°C factory preset setting temperature ; no mixing valve needed
¥
Factory setting of 43°C or above require cold water mixing at the
hand wash faucet.
¥
Microprocessor limits temperature increase according to the preselected temperature decrease.
®
Temperature Adjust
Knob (ADJ) Option
Rear Electrical
Knock-Out
6
70
51
146
159
84
4x Ø5
29
70
29
6
33
244
Ø28 Access Hole
257
159
Chronomite Laboratories assumes no responsibility for use of void or suspended data. © Copyright Chronomite Laboratories, Inc.
Member of Morris Group International, City of Industry, CA Please visit www.chronomite.com for most current specifications.
Company_______________________________________________________________________________________________________
Model Number & Options_____________________________________________________________________Quantity_______________
Contact_________________________________________________Title____________________________________________________
Signature
& APPROVAL FOR
MANUFACTURING
(Approval for
Manufacturing)__________________________________________________________________Date ____________________________
SELECTION SUMMARY
PH. 800-447-4962
626-937-4270
FAX 626-937-4279
www.chronomite.com
IFM-LF 09/06/18
®
INSTANT-FLOW MICRO - LOW FLOW
TECHNICAL DIMENSIONS
INSTANT-FLOW MICRO - LOW FLOW
Dimensions: 6-1/4" (H) x 9-5/8" x 2-3/4"
Weight: 5 lbs.
Materials: Rugged cast aluminum housing
Celcon plastic element assembly
with nichrome coils
Housing Color: White
Minimum Operating Flow Rate: 0.35 GPM
Minimum Operating Pressure: 25 PSI
Maximum Operating Pressure: 80 PSI
Maximum Pressure: 150 PSI
Maximum Water Temperature: 160°F
Maximum Ambient Operating Temperature: 140°F
Listing: UL, IAPMO, UPC, ADA, ETL
GENERAL NOTES:
¥
The microprocessor adjusts the heater's power for variations in flow
rates, inlet water temperature and pressure to assure the selected
factory preset water temperature.
¥
240V models when operated at 220V will have approximately a 15%
wattage decrease.
¥
120V models when operated 110V will have approximately a 15%
wattage decrease.
¥
Instant-Flow Micro is ideal for sensor/hands-free faucets with the
INSTALLATION DIAGRAM
104°F factory preset setting temperature ; no mixing valve needed
¥
Factory setting of 110°F or above require cold water mixing at the
hand wash faucet.
¥
Microprocessor limits temperature increase according to the pre-
selected temperature.
®
Get Started www.mgispecbuilder.comConfigure products and create specs with ease.
ELECTRIC TANKLESS WATER HEATER - POINT OF USE
Temperature Adjust
Knob (ADJ) Option
Rear Electrical
Knock-Out
3
2
1
"
4
3
4x Ø
1
1
8
2"
16
2
"
1
6
"
4
5
"
3
"
16
3
"
4
3
5
"
4
10
5
9
"
8
Ø1
1
"
8
3
" Access Hole
32
1
"
4
5
1
"
16
1
1
"
8
"
4
1
6
4
"
Notes:
1. Heater to be installed below the level of all hot water outlets serviced by the Heater.
2. Diagram shown with standard 3/8” Compression Fitting. Optional 1/2” NPT Male water
connections available.
Instant-Flow Micro Heater
1
Electrical Junction Supply Box (Optional)
2
2095-1 Disconnect Switch (Optional)
2A
Electrical Supply Conduit
3
OR
7
6
8
2A
5
Electrical Supply Wire
4
Dual Outlet Stop, 3/8” Comp. Outlet
5
Connections
3/8” Comp. x 1/4” NPT Fittings (supplied)
6
3/8” Hot Water Outlet
7
3/8” Cold Water Inlet
8
Chronomite Laboratories assumes no responsibility for use of void or suspended data. © Copyright Chronomite Laboratories, Inc.
Member of Morris Group International, City of Industry, CA Please visit www.chronomite.com for most current specifications.
Company_______________________________________________________________________________________________________
Model Number & Options_____________________________________________________________________Quantity_______________
Contact_________________________________________________Title____________________________________________________
Signature
& APPROVAL FOR
MANUFACTURING
(Approval for
Manufacturing)__________________________________________________________________Date ____________________________
SELECTION SUMMARY
1
3
2
4
Neutral
ATTENTION:
Unit must be hard wired.
NOTE: Heaters are single phase. All tests
are measured at the output of the heater.
WIRING CONNECTION
Hot or
Conduit
Refer to Local Code
for Wire size
PH. 800-447-4962
626-937-4270
FAX 626-937-4279
www.chronomite.com
Hot
"GRD" is
Earth Ground
IFM-LF 09/06/18
Loading...