Chroma-Q Studio One 100 User Manual

Specification Sheet - Version: 1.1

Chroma-Q® Studio One 100™ Variable White
Above Par Performance from a White Source

Part No: CHSONE100V

DESCRIPTION

The fixture shall provide a powerful hot lumens output of up to 2,100
lumens (Combined).

The fixture shall be suitable for Theatrical, Film, TV and many other
applications.

The fixture shall provide a variable white output (3,000K-6,100K).
The fixture shall provide a CRI of 86.
The fixture shall provide a smooth, linear dimming curve.
The fixture shall feature a built-in stand alone mode.
The fixture shall feature a built-in power supply.
The fixture shall be manufactured from extruded material.
The fixture shall provide fully homogenised output beam.

FEATURES

• Extreme variable white output (3,000K to 6,100K)

• Defined 18° beam

• Extremely uniform wash

• Fully homogenised beam

• Superior build quality

• High CRI of 86

• Camera friendly - Flicker free operation

• Floor, truss or wall mountable

• Convection cooled for near silent running

• Theatrical grade dimming

ORDERING INFORMATION

CHSONE100V: Chroma-Q Studio One 100 Variable White, IP20, PowerCon
and XLR-5pin In/Out

PHOTOMETRICS

OVERALL SPECIFICATIONS

Net dimensions (Full Open Yoke): Width: 214mm / 8.5”
Height: 267mm / 10.5”
Depth: 232mm / 9”
Net weight: 3.8kg / 8.5lb
Shipping dimensions: Width: 406mm / 16”
Height: 228mm / 9”
Depth: 292mm / 11.5”
Shipping Weight: 5.5kg / 12lb
Power Supply: Built-in
Power Input Rating: 100-240V AC 50-60Hz 125VA
Power Factor: 0.5
Power Consumption: 58W @ 120/230V AC
Inrush Current: 15A @ 120V AC; 36A @ 230V AC
Idle Power Consumption: 3.5W @ 120V AC: 5.6W @ 230V AC
Typical Power & Current: Measurements done with all LEDs at
maximum intensity. Measurements made
at nominal voltage. Allow for a deviation
of +/- 10%.
Power Connector In/Out: powerCON
Data Connectors In/Out: XLR 5-pin
Control Protocol: ANSI E1.11 USITT DMX 512-A
Cooling System: Convection
Operating Temperature: 0°C to 40°C
Construction: Cast machined aluminium
Colour: Black (custom colours available on request)
Built-In Hardware: Split Yoke, 6.25” Accessory Holder
Included Accessories: Wireless IR Remote, Colour Frame
IP Rating: IP20
Approvals: CISPR 15/EN55015& EN61547, FCC Part
15 Subpart B:2012 / ICES-003:2012, CSA
C22.2, UL 1573, IEC 60598
LED Engines: 1
LEDs Per Engine: Warm White, Cold White
Control Modes: 2 channels CTI, 2 channels WW CW,
Master, Slave
Dimming Curve: Theatrical
Wireless Control: On / O, Fade In, Fade Out
Hot Lumen Output (Combined): 2,100
Optics: Fully homogenised
Beam Angle: 18°
Beam Distribution: Symmetrical direct illumination
CCT: 3,000K - 6,100K
CRI: 86
Lamp Life: L70 at 50,000 hours

www.chroma-q.com

Specification Sheet - Version: 1.1

Chroma-Q® Studio One 100™ Variable White

Above Par Performance from ONE Source

Part No: CHSONE100V

Chroma-Q and all associated product names are recognised trademarks, for more information visit www.chroma-q.com/trademarks. The rights and ownership of all trademarks are recognised.

Whilst every effort has been made to ensure that the information is correct, Chroma-Q accepts no liability for errors or omissions. Technical specifications and data are provided for guidance only.

Because we constantly aim to improve our products, we reserve the right to amend or alter at any time and without prior notice, the specifications of any product. E&OE.

www.chroma-q.com