Chroma-Q Color Force II 48 User Manual

Specification Sheet - Version: 0.1

PRELIMINARY

Chroma-Q® Color Force II 48 RGBA

Part No: CHCF248RGBA

DESCRIPTION

The Chroma-Q® Color Force II 48™ is part of the next-generation of
solutions which take performance to an all-new level.

Using the very latest fully homogenised optics found in the popular
Chroma-Q Color One 100™ product range, the Color Force II fixtures’
output is a single, clean and pure beam of light, delivering a superior
colour blend with no unsightly colour mixing shadows.

The homogenised optics and improved Chroma-Q technology provide even
higher quality saturates and pastels, and a purer white with no skittles – all
from a single source.

Factory calibration ensures all Color Force II units are colour matched, so
side by side they will be outputting the exact same colour.

The new models also provide more creative control, with twice as many
light engines accommodated within the same fixture lengths – providing
independently controllable cells every 3 inches.

FEATURES

• Up to 50% brighter compared to predecessors

• Homogenised output – superior colour blend & no unsightly colour-

mixing shadows

• Even more creative control – twice as many light engines

• Theatrical grade dimming

• Practical, user friendly design

• Superior unit-to-unit consistency

• Optional internal LumenRadio

• Chroma-Q’s proven LED performance

• Touchscreen user interface

ORDERING INFORMATION

CHCF248RGBA: Chroma-Q Color Force II 48
CHCF248RGBALR: Chroma-Q Color Force II 48 w LumenRadio Installed

ACCESSORIES

CHCFBL48: Chroma-Q Border lens for Color Force 48
CHCFCL48: Chroma-Q Cyc lens for Color Force 48

OVERALL SPECIFICATIONS

Net Dimensions Length: 1,181mm / 46.5”
(without fixings): Width: 165mm / 6.5”
Height: 191mm / 7.5”
Net Weight: 18 Kg / 40 lb
Shipping Dimensions: Length: 1,295mm / 51”
Width: 305mm / 12”
Height: 320mm / 12.5”
Shipping Weight: 21 Kg / 46 lb
Power Supply: Built-in
Power Input Rating: 100-240V AC 50-60Hz 400VA
Power Consumption: 533W
Typical Power & Current: Measurements done with all LEDs at maxi­ mum intensity. Measurements made at
nominal voltage. Allow for a deviation of
+/- 10%
Power Connectors In/Out: Neutrik powerCON TRUE1
Data Connectors In/Out: Neutrik XLR 5-pin
Max Fixtures in Series: 3 x fixtures @110V, 6 x Fixtures @220V
Control Protocol: ANSI E1.11 USITT DMX 512-A
Cooling System: Forced
Operating Temperature: 0°C to 40°C
Construction: Anodised aluminium extrusion
Colour: Black
Built-In Hardware: Quick release lever for tilt adjustment
IP Rating: IP20
Control Modes: RGBA, RGB, HSI, Look Sel, Master, x16 ,
x8, x4 , x2 , x1, Odd /Even, Skp3 , Skp7
Dimming Curve: Theatrical
Variable Effects Engine: Strobe, Strobe on Top, Strobe Random
Hot Lumen Output (Combined): 12,400 lm
Optics: Fully homogenised lenses
Beam Angle: 22° (approx.)
Beam Distribution: Asymmetrical direct illumination
CCT: Adjustable 1,000 - 10,000K
Colour Gamut: Performance enhanced
CRI: 92
Lamp Life: L70 at 50,000 hours
Approvals: CISPR 22 :2006/EN55022 :2006 & CISPR
24 :1997/EN55024 :1998, ICES-003
:2004 & FCC Part 15 Subpart B: 2007,
CSA C22. No. 166-M1983:R2008 UL
1573:2003; UL 8750

Patents pending

www.chroma-q.com

DIMENSIONS

PRELIMINARY

Specification Sheet - Version: 0.1

Chroma-Q® Color Force II 48 RGBA

Part No: CHCF248RGBA

W

L

H

Patents pending

Chroma-Q and all associated product names are recognised trademarks, for more information visit www.chroma-q.com/trademarks. The rights and ownership of all trademarks are recognised.

Whilst every effort has been made to ensure that the information is correct, Chroma-Q accepts no liability for errors or omissions. Technical specifications and data are provided for guidance only.

Because we constantly aim to improve our products, we reserve the right to amend or alter at any time and without prior notice, the specifications of any product. E&OE.

www.chroma-q.com