Chroma-Q Inspire XT, CHINHLRGBWXT, CHINHLRGBWXTW, 632-8220, 632-8221 User Manual

Chroma-Q®

Inspire XT™

Terminal Strip

User Manual

Part Number: CHINHLRGBWXT, CHINHLRGBWXTW

Model: 632-8220, 632-8221

Software Version (Engine) 2.2

Manual: 632-0717, V1.2 Jul. 2019

Inspire XT User Manual 1 V1.2 July, 2019

www.chroma-q.com

Warranty Statement

Chroma-Q warrants to the original purchaser, with proof of purchase,
that its delivered products shall be free from defects in material and workmanship under normal use
for a period of 36 months from date of shipment.

Chroma-Q will repair, or at its option, provide an equivalent item or replace, the defective product
during the stated warranty period. This warranty applies only to the repair or replacement of the
product and only when the product is properly handled, installed and maintained according to
Chroma-Q instructions. This warranty excludes defects resulting from improper handling, storage,
installation, acts of God, fire, vandalism or civil disturbances. Purchaser must notify Chroma-Q in
writing within 14 days of noticing the defect. This warranty excludes field labour or service charges
related to the repair or replacement of the product.

The warranty contained herein shall not extend to any finished goods or spare parts from which any
serial number has been removed or which have been damaged or rendered defective (a) as a result
of normal wear and tear, wilful or accidental damage, negligence, misuse or abuse; (b) due to water
or moisture, lightning, windstorm, abnormal voltage, harmonic distortion, dust, dirt, corrosion or other
external causes; (c) by operation outside the specifications contained in the user documentation; (d)
by the use of spare parts not manufactured or sold by Chroma-Q or by the connection or integration
of other equipment or software not approved by Chroma-Q unless the Customer provides acceptable
proof to Chroma-Q that the defect or damage was not caused by the above; (e) by modification, repair
or service by anyone other than Chroma-Q, who has not applied for and been approved by Chroma­Q to do such modification, repair or service unless the Customer provides acceptable proof to
Chroma-Q that the defect or damage was not caused by the above; (f) due to procedures, deviating
from procedures specified by Chroma-Q or (g) due to failure to store, install, test, commission,
maintain, operate or use finished goods and spare parts in a safe and reasonable manner and in
accordance with Chroma-Q’s instructions (h) by repair or replacement of engines without factory
training.

The warranty contained herein shall not apply to finished goods or spare parts which are sold “as is”,

as “second-hand”, as used”, as “demo” or under similar qualifications or to Consumables
(“Consumables” is defined as any part(s) of goods or part(s) for use with goods, which part(s) of goods

or part(s) for use with goods are consumed during the operation of the goods and which part(s) of
goods or part(s) for use with goods require replacement from time to time by a user such as, but not
limited to, light bulbs).

The warranty contained herein shall not apply, unless the total purchase price for the defective
finished goods or spare parts has been paid by the due date for payment.

The warranty contained herein applies only to the original purchaser and are not assignable or
transferable to any subsequent purchaser or end-user.

This warranty is subject to the shipment of the goods, within the warranty period, to the Chroma-Q

warranty returns department, by the purchaser, at the purchaser’s expense. If no fault is found,

Chroma-Q will charge the purchaser for the subsequent return of the goods.

Chroma-Q reserves the right to change the warranty period without prior notice and without incurring
obligation and expressly disclaims all warranties not stated in this limited warranty.

Inspire XT User Manual 2 V1.2 July, 2019

www.chroma-q.com

Disclaimer

The information contained herein is offered in good faith and is believed to be accurate. However,
because conditions and methods of use of our products are beyond our control, this information
should not be used in substitution for customer's tests to ensure that Chroma-Q products are safe,
effective, and fully satisfactory for the intended end use. Suggestions of use shall not be taken as
inducements to infringe any patent. Chroma-Q sole warranty is that the product will meet the sales
specifications in effect at the time of shipment. Your exclusive remedy for breach of such warranty
is limited to refund of purchase price or replacement of any product shown to be other than as
warranted.

Chroma-Q reserves the right to change or make alteration to devices and their functionality without
notice due to our on going research and development.

The Chroma-Q Inspire XTTM range has been designed specifically for the lighting industry. Regular
maintenance should be performed to ensure that the products perform well in the entertainment
environment.

If you experience any difficulties with any Chroma-Q products please contact your selling dealer. If
your selling dealer is unable to help please contact [e-mail]. If the selling dealer is
unable to satisfy your servicing needs, please contact the following, for full factory service:

Outside North America: North America:
Tel: [phone] Tel: [phone]
Fax: [phone] Fax: [phone]

[e-mail] [e-mail]

For further information please visit the Chroma-Q website at www.chroma-q.com.

Chroma-Q and Inspire are trademarks, for more information on this visit www.chroma­q.com/trademarks.

The rights and ownership of all trademarks are recognized.

Important Notice:

As per the requirements in the Occupational Safety and Health Administration standards for product
approval, please refer to the OSHA web pages http://www.osha.gov/dts/otpca/nrtl/ for information
on the list of Nationally Recognized Testing Laboratories (NRTLs) and the scope of recognition.

Inspire XT User Manual 3 V1.2 July, 2019

www.chroma-q.com

Safety information

Warning!

Safety Hazard.

Risk of severe injury or

death.

Warning!

Fire Hazard.

Warning!

Hazardous Voltage.

Risk of severe lethal

electric shock.

Warning!

Refer to User

manual.

Warning!

• Read the user manual before installing and operating the Chroma-Q Inspire XT. For future
reference, keep and use the manual.

• Safety precautions given in user manual must be followed at all times and the manuals of all the
devices you connect it to. Observe all the warnings printed on devices and in manuals. Make
sure whoever is involved in working on or using the Inspire XT has carefully read and
understood all the safety precautions and lasted warnings.

• Install, connect, operate and service devices only as described in this manual and in

connected devices’ manuals and only in accordance with local laws and regulations. All

Chroma-Q manuals are available for download from www.chroma-q.com.

• Inspire XT does not have user-serviceable parts. Refer any operation not described in

this manual to [e-mail].

If you experience difficulties with any Chroma-Q products please contact your local dealer.
If your local dealer is unable to help then please contact [e-mail].

If you are having trouble finding what you are looking for on our website, then contact our Chroma-Q

marketing department by sending an email to [e-mail].

WARNING!

Read the safety precautions in this section

before installing, powering, operating or

servicing

Inspire XT User Manual 4 V1.2 July, 2019

www.chroma-q.com

PROTECTION FROM ELECTRIC SHOCK

• Use only the cables specified in this manual and on the Chroma-q website at www.chroma-

q.com to interconnect devices in the installation. If the specified cables are not long

enough for an intended cable run, consult Chroma-Q for assistance in finding or creating a
safe alternative solution.

• Provide a means of locking out AC mains power that allows power to the installation to be
shut down and made impossible to reapply, even accidentally, during work on the
installation.

• Shut down power to the installation during service and when it is not in use.

• Before applying power to the installation, check that all power distribution equipment and

cables are in perfect condition and rated for the current requirements of all connected
devices.

• Isolate the installation from power immediately if any product, power cable or power plug is
in any way damaged, defective or wet, or if it shows signs of overheating.

• Do not immerse an Inspire XT fixture in water or expose it to high-pressure water jets.

PROTECTION FROM BURNS AND FIRE

• The Inspire XT is cooled passively by natural air convection. Provide adequate clearance
for airflow around the fixtures.

• Do not operate the Inspire XT if the ambient temperature (Ta) exceeds 40° C (104° F).

• Do not modify the Inspire XT in any way not described in this manual or install other than

genuine Chroma-Q parts.

• Use only accessories approved by Chroma-Q.

PROTECTION FROM INJURY

• Ensure that the installation hardware and supporting surface or structure can hold at least
10 times the weight of all the devices they support.

• Block access below the work area and work from a stable platform whenever installing,
servicing or moving the Inspire XT.

• As soon as work is completed, check that all hardware and components are securely
fastened to supporting structures.

• Make sure there are no flammable materials close to the product during operation.

• Avoid direct eye exposure to the light source while the product is on.

• Never try to repair the product. Repairs carried out by unskilled people can lead to damage

or malfunction. Please contact the nearest authorized dealer or contact support@chroma-

q.com.

Keep this User Manual for future consultation. If this product is used by another

user, be sure that they also receive this document.

Inspire XT User Manual 5 V1.2 July, 2019

www.chroma-q.com

Table of Contents

1.

Product overview .................................................................................................................... 6

1.1 Inspire External Control Box .............................................................................................. 6

2.

Operation.................................................................................................................................. 7

2.1 Unpacking the Units ........................................................................................................... 7

2.2 Cabling system ................................................................................................................... 7

2.3 Mounting........................................................................................................................... 13

2.4 Optics ............................................................................................................................... 14

2.5 Control .............................................................................................................................. 14

2.6 Thermal Performance ...................................................................................................... 14

2.7 Updating the LED engine software .................................................................................. 15

3.

Troubleshooting .................................................................................................................... 16

4.

Specification .......................................................................................................................... 17

4.1 Technical Specifications ................................................................................................... 17

4.2 Drawings – Dimensions ................................................................................................... 18

5.

Maintenance ........................................................................................................................... 18