Chromalox LCD-8 Catalog Page

LCD-8

Configurable Aerial
Snow Melting
Controller (cont’d.)

Heating Cable

General

Area of use .......................... Nonhazardous locations

Enclosure

Protection ........................... NEMA 3R

Cover attachment ................ Polycarbonate with machine screws

Entries ................................. 1 x 3/4" entry (bottom)

Material ............................... Polycarbonate

Mounting ............................ Pole mount

Dimensions ......................... 4.6" (W) x 6.1" (H) / 117mm (W) x 155mm (H)

Control

Supply voltage .................... Chromalox PCN 389781: 100 VAC – 240 VAC; 50/60 Hz

Load .................................... 3 amp maximum inductive

16 amp maximum resistive

Heater Hold-On timer .......... 0, 1, 3 (default) or 5 hours; configured by magnetic reed switch

Set point temperature ......... Off (moisture only), 36°F, 38°F (default), 40°F; configured by

magnetic reed switch

Interface

Status indicators ................. SUPPLY (green): Power on; will flash while in configuration mode

HEAT (yellow): Heating cycle in progress

Wire and Cable Ratings

Power cable ........................ Size for heater load (16 Amps maximum)

Heater cable ........................ Size for maximum heater load

Environmental

Operating temperature ........ -40°F to 104°F (-40°C to 40°C)

Storage temperature ........... -67°F to 167°F (-55°C to 75°C)

Specifications and Ordering Information

Model Number PCN Stock

LCD-8 Snow Melt Controller 389781 S

Stock Status: S = stock AS = assembly stock NS = non-stock
To Order—Specify model, PCN and quantity.

G-68