Chromalox ITC1, ITC2 Catalog Page
ITC1 & ITC2
WD
Digital Heat Trace
Controller
1 & 2 Circuit
(cont’d.)
Dimensions
316 SS
Enclosure
Fiberglass
Enclosure
Mounting
Brackets
Heating Cable
H W D F B M
Inch 11.8 9.9 7.6 0.7 1.8 3.0
cm 30.2 25.1 19.4 1.7 4.4 7.6
Inch 10.3 8.5 8.0 1.2 1.8 3.0
cm 26.2 21.3 19.7 3.2 4.4 7.6
M
BHeat Sink
H
Heat Sink
F
Ordering
Information
To Order —
Complete the
Model Number
using the Matrix
provided.
Top View Front View Side View
Model Product Description
ITC
The Chromalox ITC series IntelliTRACE Controller will control 1 or 2 circuits and is designed for industrial Heat Trace Line and/or Ambient Sensing applications in Non-Hazardous or Hazardous (Class I, Division 2) areas. The ITC is a wall mounted device that operates
at 100-277 VAC and rated at 40A per circuit in a -40˚F to 104˚F (-40˚C to 40˚C) Ambient. Standard features: NEMA 4X FG enclosure,
3.5" High Resolution TFT Display with integral display heater, front panel capacitive touch switches & LED Indication of Power, Load
& Alarm. ON/OFF, PID or Manual SSR power control with a selectable Soft Start program. The ITC accepts up to 2 RTD sensors per
circuit for Ambient and/or Line Sensing applications. With multiple sensors, output behavior is based on min, max, average temperature
or as 2-circuit ambient sensing control from a single RTD. Other standard features include: 2 x common alarm outputs (1 x AC, 1 x
DC), Alarms for Low/High Temperature & Current, GFEP (Ground Fault Equipment Protection) & Sensor Failure, ModBus RTU/RS485
(or /RS422) Communications and user selectable manual output on failed sensor. 16 gage Stainless Steel wall mounting brackets are
included. UL/cUL & CE Optional features include: NEMA 4X 316 SS Enclosure, ModBus TCP/Ethernet, Webserver/Ethernet or BACnet
communications. Standard 1 year warranty.
Code Number of Circuits
1 1 Circuit
2 2 Circuits
Code Communications
0 ModBus RTU/RS485 (& RS422)
1 ModBus TCP/Ethernet
2 Webserver/Ethernet
3 BACnet/Ethernet
9 Other Communications
Code Enclosure Enclosure Size H x W x D, In (cm)
0 NEMA 4X Fiberglas 10 x 8 x 8 (25 x 21 x 20)
1 NEMA 4X 316 SS 12 x 10 x 8 (30 x 25 x 19)
Code Add to Complete Model Number
0
G-126
ITC 2- 0 0 0 Typical Model Number
Note: The ITC comes complete with one set of 16 gauge stainless steel wall mounting brackets.
Model Description PCN Model Description PCN
ITC1-000 ITC 1 Loop, FG ENC, RS485 316101 ITC1-010 ITC 1 LOOP, SS ENC, RS485 316494
ITC2-000 ITC 2 Loop, FG ENC, RS485 316110 ITC2-010 ITC 2 LOOP, SS ENC, RS485 316507
ITC1-100 ITC 1 Loop, FG ENC, Ethernet 316128 ITC1-110 ITC 1 LOOP, SS ENC, Ethernet 316929
ITC2-100 ITC 2 LOOP, FG ENC, Ethernet 316136 ITC2-110 ITC 2 LOOP, SS ENC, Ethernet 316937
Loading...