Programmable
AC Power Source
Chroma Programmable AC Power Source
61600 series delivers pure, instrument grade
AC power at very low cost. The 61600 series
supplies the output voltage from 0 to 300VAC,
and frequency from 15 to 1000Hz. It is suitable
for commercial, avionics, and military applica-
tions from bench-top testing to mass produc-
tion.
The 61600 series generates very clean AC out-
put with distortion less than 0.3% at 50/60Hz.
With the state-of-the-art PWM technology and
power factor correction circuit, the 61600 series
yields higher efficiency and delivers more out-
put power. The 61600 series is capable of
delivering up to 6 times of peak current com-
pared to its maximum rated current that makes
it ideal for inrush current test.
The AC+DC modes extend the applications not
only pure AC voltage but also DC component
for testing DC offset in laboratory. Users also
can use an optional DC noise filter to get low
noise and good stability DC voltage for testing.
Applying the advanced DSP technology, the
61600 series is able to provide precision and
high speed measurements such as RMS volt-
age, RMS current, true power, frequency,
power factor, and current crest factor.
The 61600 series also provides an external
analog input to amplify the analog signal from
arbitrary signal generator. Thus, it is capable of
simulating the unique waveform which
observed in the field. Users also can control the
amplitude of output voltage by a DC level. It is
suitable to integrate Chroma AC source 61600
series into users’ system.
For convenience sake, the 61600 series offers
versatile front panel operations with LCD dis-
play and rotary knob. Users may also control
the 61600 series AC source remotely via GPIB,
RS232C or APG (Analog Programming) inter-
face. Users can find Labview driver in NI’s web
site for programming.
The power-on self-diagnosis routine along with
the full protections against OPP, OCP, OVP and
OTP ensure the quality and reliability for the
most demanding engineering tests and ATS
applications.
PROGRAMMABLE AC POWER SOURCE
MODEL 61600 SERIES
PFCPFC
GPIB
MODEL 61600 SERIES
Key Features:
Power:
500VA (61601), 1000VA (61602)
1500VA (61603), 2000VA (61604)
4000VA (61605)
Voltage range: 0-150V/0-300V/Auto
Frequency: 15Hz – 1000Hz
Compact size and weight attributable to
advance PWM technology
Built-in PFC, provide input power factor
over 0.98 (full load)
AC+DC output mode for voltage DC offset
simulation
Programmable slew rate setting for
changing voltage and frequency
Programmable voltage, current limit
One-key recall for 9 different voltage and
frequency
Low output impedance for testing IEC
61000-3-2 ( 61605 )
Comprehensive measurement capability, V,
Irms, Ipk, Inrush, P, Q, S, PF, CF of current
and etc.
High output current crest factor, ideal for
inrush current testing
Turn on, turn off phase angle control
TTL signal which indicates ON/OFF
Analog programming interface
3 units combined to 3-phase power output
Easy-use software for operation and
ON/OFF test
Optional GPIB and RS-232C interface
Full protection: OP,OC,OV and OT
protection
APG
I
1. SLEW RATE OF VOLTAGE AND FREQUENCY
Chroma Programmable AC Power Source 61600 Series use DSP technology to program voltage waveform. Users can change the voltage or
frequency in only one step. Or users can set the slew rate to get a gradual increase or decrease of voltage and frequency. It can help users
easily to test the power input range of their products, for example, 90V-264V/47Hz-63Hz.
3. COMPREHENSIVE MEASUREMENTS
Chroma Programmable AC Power Source 61600 Series has built in a 16-bit precision measurement circuit and firmware utilities to measure the
RMS voltage, RMS current, true power, power factor, peak repetitive current, inrush current, current crest factor, VA (apparent power), and VAR
(reactive power). These comprehensive measurements make Chroma Programmable AC Power Source 61600 Series not only a power source
but also a power meter.
4. HIGH OUTPUT CURRENT CREST FACTOR AND TURN ON / OFF PHASE ANGLE CONTROL
Chroma Programmable AC Power Source 61600 Series is capable of provide high output current crest factor (Max. 6). It delivers sufficient
transient power required for testing most of switching made power circuits. The additive programmable turn on (off) phase angle control
makes the 61600 series AC source ideal for inrush current test.
2. ONE-KEY RECALL MODE
Chroma Programmable AC Power Source 61600 Series allows users to save 9 various voltage and frequency. Users can recall the value by
only pressing “1” to “9” key. It can help testers or manufacture operators easily to change voltage or frequency for some fixed test conditions.
AC Power Source Series
CHOICE 1 - 9 , PRESS (ENTER) TO SAVE MAIN PAGE
1. Vac = 90.0 F = 60.00 Vdc = 0.0
2. Vac = 115.0 F = 60.00 Vdc = 0.0
3. Vac = 230.0 F = 50.00 Vdc = 0.0
Vac = 110.0 F = 60.00 Vdc = 0.0 L
V = 110.0 F = 60.00 I = 0.74
P = 34.2 PF = 0.42 CF = 5.14
Vac = 110.0 F = 60.00 Vdc = 0.0 L
Vdc = 0.0 Idc = 0.00 Ip = 3.8
Is = 10.2 VA = 81.4 VAR = 73.9
61601 : Programmable AC Source 0~300V, 15~1KHz / 500VA
61602 : Programmable AC Source 0~300V, 15~1KHz / 1KVA
61603 : Programmable AC Source 0~300V, 15~1KHz / 1.5KVA
61604 : Programmable AC Source 0~300V, 15~1KHz / 2KVA
61605 : Programmable AC Source 0~300V, 15~1KHz / 4KVA
A615001 : Remote Interface Board for Model 61500/61600 Series
(External V Input, RS-232 Interface, GPIB Interface)
ORDERING INFORMATION
A610004 : Universal Socket Center for Model 6512/6520/6530/ 6560/
6415/6420/6430/61500/61600 Series
A615007 : Softpanel for Model 61500/61600 Series
A615008 : DC Noise Filter for Model 61500/61600 Series
A600009 : GPIB Cable (200cm)
A600010 : GPIB Cable (60cm)
1. LCD Display
Show the test setup, operating status and readings
2. Page Up/Down Key
Facilitate parameter data editing
3. Numeric Key
Data entry for test parameters
4. Rotary Knob
Regulate for Analog voltage, frequency and parameter setting
5. Power Switch
6. Output Indicator
Lighten when output is enable.
7. Output Enable Key
Enable or disable output.
8. External V Reference
External programming voltage input
9. RS-232C Interface
10. GPIB Interface
11. Remote Sense Terminal
Use to compensate the line drop between source and testing
point
12. Output Terminal
Connect output cable to the UUT
13. System Interface
For synchronizing signal and transient signal
14. Input Terminal
1
2 3
4
5
6
7
10
9
8
14
13
1211
5. EASY-USE SOFTWARE: THE 61600 SERIES SOFTPANEL
PANEL DESCRIPTION
Main Operation Menu Auto Run (for ON/OFF or Burn in Test)
Distributed by:
Worldwide Distribution and Service Network
61600-200505-1000
CHINA
CHROMA ELECTRONICS
(SHENZHEN) CO., LTD.
8F, No.4, Nanyou Tian An
Industrial Estate, Shenzhen,
China Pc: 518054
Tel: +86-755-2664-4598
Fax: +86-755-2641-9620
EUROPE
CHROMA ATE EUROPE B.V.
Max Planckstraat 4, 6716 BE
Ede, The Netherlands
Tel: +31-318-648282
Fax: +31-318-648288
U.S.A.
CHROMA ATE INC. (U.S.A.)
7 Chrysler Irvine, CA 92618
Tel: +1-949-421-0355
Fax: +1-949-421-0353
Toll Free: +1-800-478-2026
CHROMA ATE INC.
HEADQUARTERS
66, Hwa-Ya 1st Rd., Hwa-Ya
Technical Park, Kuei-Shan Hsiang,
Taoyuan Hsien 333, Taiwan
Tel: +886-3-327-9999
Fax: +886-3-327-8898
http://www.chromaate.com
E-mail: chroma@chroma.com.tw
Developed and Manufactured by :
Model 61601 61602 61603 61604 61605
Output Phase 111 1 1
Output Rating -AC
Power/Phase 500VA 1000VA 1500VA 2000VA 4000VA
Voltage
Range/Phase 150V/300V/Auto 150V/300V/Auto 150V/300V/Auto 150V/300V/Auto 150V/300V/Auto
Accuracy 0.2%+0.2%F.S. 0.2%+0.2%F.S. 0.2%+0.2%F.S. 0.2%+0.2%F.S. 0.2%+0.2%F.S.
Resolution 0.1V 0.1V 0.1V 0.1V 0.1V
Distortion 0.3% @ 50/60Hz 0.3% @ 50/60Hz 0.3% @ 50/60Hz 0.3% @ 50/60Hz 0.3% @ 50/60Hz
1%, 15-1KHz (Typical) 1%, 15-1KHz (Typical) 1%, 15-1KHz (Typical) 1%, 15-1KHz (Typical) 1%, 15-1KHz (Typical)
Line Regulation 0.1% 0.1% 0.1% 0.1% 0.1%
Load Regulation 0.2% 0.2% 0.2% 0.2% 0.2%
Max. Current/Phase
R.m.s. 4A/2A (150V/300V) 8A/4A (150V/300V) 12A/6A (150V/300V) 16A/8A (150V/300V) 32A/16A (150V/300V)
Peak 24A/12A (150V/300V) 48A/24A (150V/300V) 72A/36A (150V/300V) 96A/48A (150V/300V) 192A/96A (150V/300V)
Frequency
Range DC, 15-1KHz DC, 15-1KHz DC, 15-1KHz DC, 15-1KHz DC, 15-1KHz
Accuracy 0.15% 0.15% 0.15% 0.15% 0.15%
Output Rating -DC
Power 250W 500W 750W 1000W 2000W
Voltage 212V/424V 212V/424V 212V/424V 212V/424V 212V/424V
Current(per phase) 2A/1A (212V/424V) 4A/2A (212V/424V) 6A/3A (212V/424V) 8A/4A (212V/424V) 16A/8A (212V/424V)
Input Rating
Voltage Range 90-250V, 1ø 90-250V, 1ø 90-250V, 1ø 90-250V, 1ø 190-250V, 3ø
Frequency Range 47-63Hz 47-63Hz 47-63Hz 47-63Hz 47-63Hz
Current(per phase) 10A Max. @ 90V 18A Max. @ 90V 22A Max. @ 90V 28A Max. @ 90V 14A Max. @ 190V
Power Factor 0.97 Min. 0.97 Min. 0.98 Min. 0.98 Min. 0.98 Min.
Measurement
Voltage
Range/Phase 150V/300V 150V/300V 150V/300V 150V/300V 150V/300V
Accuracy 0.2%+0.2%F.S. 0.2%+0.2%F.S. 0.2%+0.2%F.S. 0.2%+0.2%F.S. 0.2%+0.2%F.S.
Resolution 0.1V 0.1V 0.1V 0.1V 0.1V
Current
Range (peak) 24A 48A 72A 96A 192A
Accuracy (r.m.s.) 0.4%+0.3%F.S. 0.4%+0.3%F.S. 0.4%+0.3%F.S. 0.4%+0.3%F.S. 0.4%+0.3%F.S.
Accuracy (peak) 0.4%+0.6%F.S. 0.4%+0.6%F.S. 0.4%+0.6%F.S. 0.4%+0.6%F.S. 0.4%+0.6%F.S.
Power
Accuracy 0.4%+0.4%F.S. 0.4%+0.4%F.S. 0.4%+0.4%F.S. 0.4%+0.4%F.S. 0.4%+0.4%F.S.
Resolution 0.1W 0.1W 0.1W 0.1W 0.1W
Others
Interface GPIB, RS-232 (Optional)
Temperature
Operating 0 ~ 40 OC0~ 40 OC0~ 40 OC 0 ~ 40 OC 0 ~ 40 OC
Storage -40 ~ +85 OC -40 ~ +85 OC -40 ~ +85 OC -40 ~ +85 OC -40 ~ +85 OC
Safety & EMC CE ( include EMC & LVD )
Dimensions(WxHxD) 482x132.6x570 mm 482x132.6x570 mm 482x132.6x570 mm 482x132.6x570 mm 482x265.9x570 mm
Weight 20 kg 20 kg 21 kg 21 kg 36 kg
SPECIFICATIONS
All specifications are subject to change without notice.
Loading...