We’ve designed the M Series, a flexible, efficient line of 3-chip DLP® projectors, with your needs
in mind. We’ve thought of it all, put it into a sleek, compact chassis and provided you with
a full set of options.
The most compact in its class, this dual mercury lamp platform provides the high-performance
and feature-rich standards you’ve come to expect from all Christie products. You’ll see that
we continue to deliver brightness, versatility, reliability, affordability and now, native wide
resolution in the most recent additions to the Christie family of display solutions.
Ranging from 2850 ANSI lumens/3135 center lumens (single lamp, 200W) to 10,500 ANSI
lumens/11,550 center lumens (dual lamp, 350W), each of the M Series projectors offer high
efficiency and low cost of ownership by operating at 1320W – giving you full brightness while
using less power. These projectors employ feedback systems to determine the number of lamps
and power level used to adjust the fan speed required to cool the system.
The Christie M Series platform now includes four resolutions, WXGA (1366 x 768), SX+ (1400 x 1050),
HD (1920 x 1080) and WUXGA (1920 x 1200),
(full on/full off) / 650:1 ANSI for crisp, detailed images. Each of the projectors in the series can also be fitted
with the broadest range of high-quality lenses – all with true Intelligent Lens System (ILSTM) capabilities.
All this, combined with a 3-year warranty and our industry-leading service and support, enables
the M Series to provide high performance and peace of mind for all users.
* Using dynamic iris.
all with a variable contrast ratio of 2500-10,000:1*
Page 4
3 REINVENT THE STANDARDS
[
1 ] Dual-lamp system
1, 2
High-efficiency, dual-lamp system:
•
200W or 350W (two lamp system)
•
120V (operation) for full brightness
•
At maximum brightness 10,500 ANSI lumens
(11,500 center lumens) the unit only draws 1320W
•
Stand by power consumption
(phantom power draw) is less than 20W
•
Lamps can be hot swapped while projector
is powered on and in use
Brightness200W350W
Dual lamp
Single lamp
Lumen values in table above are for SX+ models.
Flexible lumens levels at various lamp powers.
Lamp power is specific to each model and cannot be interchanged.
[
2 ] Image quality
max power6300 ANSI lumens
min power
max power3150 ANSI lumens
min power
(6930 center lumens)
4725 ANSI lumens
(5200 center lumens)
(3465 center lumens)
2360 ANSI lumens
(2600 center lumens
10,500 ANSI lumens
(11,500 center lumens)
8535 ANSI lumens
(9400 center lumens)
5250 ANSI lumens
(5775 center lumens)
4260 ANSI lumens
)
(4700 center lumens)
2
3
5
8
1
4
6
9
7
3-chip DLP® technology, high-quality optics and world-class
10-bit image processing.
With low maintenance and highly reliable (>100,000 hours)
®
DLP
technology, the Christie M Series delivers:
•
High brightness
• Excellent color
•
Excellent uniformity
•
High contrast
•
Excellent fill ratio
[
3 ] Intelligent Lens System (ILS
TM
)
The ILS automatically
recognizes and calibrates
a lens when it is installed.
Stepper motor based
encoding ensures that motor
drift does not occur, as
typically found with DC encoded motors, providing accurate
and repeatable recall of all lens offset, zoom and focus positions.
[
4 ] Expanded lens suite
With the addition of a short
zoom (1.25-1.6:1 SX+/
1.16-1.49:1 HD) and
a long zoom (7.5-11.2:1 SX+/
6.9-10.4:1 HD), this expanded
suite provides the broadest
range of HD lenses in this marketplace.
Page 5
4
[
5 ] Dust sealed engine
M Series projectors can
operate filter-free because
of dust-sealed engines and
optics. Since dust and dirt
cannot affect the system
and filters are not required,
image quality is maintained and maintenance costs are lower.
Removable side panels enable the addition of optional coarse
dust and fog juice filters for projectors that are exposed to
harsh environments.
[
6 ] Motorized yellow notch filter
2
The motorized yellow notch
filter optically expands the
color gamut for richer greens
and yellows. Since you lose
some brightness by improving
the greens and yellows, this
is a channel-configurable
option which enables you to
decide when it is needed. This
filter, available on M Series
HD models only, is ideal when
video is being displayed.
Standard color gamutExpanded color gamut
[
7 ] Dynamic iris
Ideal for video applications, the dynamic iris is a channelconfigurable option. It automatically adjusts an internal iris
to extend the range of blacks and provide richer details
during dark scenes for true image reproduction.
[
8 ] Embedded Christie Twist
TM
Standard in all M Series models, Christie TwistTM enables
seamless white and black level edge-blending of multiple
curved images, faster and more easily than through traditional,
manual methods. Controlled by an easy-to-use GUI users
can expertly control and edge blend or stack multiple curved
images. As well, images can be warped to fit virtually any
dimension or shape display. Embedded Christie Twist
that all M Series projectors work with value-added accessories,
such as Christie AutoStack
TM
.
TM
ensures
A variable contrast ratio of 2500-10,000:1 produces a picture
with a rich, dynamic appearance.
Page 6
5 REEVALUATE THE POSSIBILITIES
WXGASXGA+HDWUXGA
[
9 ] LiteLOC
TM, 1
The LiteLOCTM feature automatically manages your display’s
brightness levels over time so that you can match the brightness
of a multiple projector system in tiled or blended arrays.
This feedback system continuously monitors lamp brightness,
so that as the lamp goes through its natural brightness decay,
the system increases the lamp power in order to maintain
consistent brightness.
No LiteLOC
TM
LiteLOC
TM
Wide screen ratios provide a multitude of benefits in a variety
of different projection applications. Carefully matching the pixel
format of the projector with that of the sources to be displayed
will ensure the best image quality and maximum impact. The
M Series now offers 4:3, 16:9 and 16:10 models to match the
aspect ratio requirements of any application.
[
8 ] Multi-window/screen processing
External processors are not required for simple, small tiled and
blended arrays, therefore lowering your costs for installation.
Each M Series projector has the ability to send signals to
multiple projectors (up to a 3 x 3 array)* without any additional
hardware or software. The projectors in the tiled array can then
show only the portion of the signal that they need to project.
[
8 ] Embedded edge blending and color matching
Advanced blending capabilities and Comprehensive Color
Adjustment (CCA
TM
) ensure digitally accurate color matching
and uniformity across multi-screen blended or tiled images.
* Subject to input bandwidth limitations.
Page 7
6
[
8 ] ChristieNET
ChristieNETTM enables users to access all projector menus
and controls through a web interface without disrupting the
live presentation. This allows for real-time adjustments and
monitoring of each projector on the network – regardless
of geographic location.
[
8 ] Automatic shut-off
This feature lowers the cost of ownership by reducing power
consumption and extending lamp life when the projector is not
in use. In this mode, if a signal is not detected, the projector
will slowly dim the lamps then shut off one lamp, and finally
if there is still no signal, the system will go into standby mode.
If a signal is detected during the ramp-down phase the unit
will revert back to its full power, dual lamp mode.
TM
web interface
[ 8 ] Input cards
In total, there are four input
card slots available. Each
projector is equipped with
a standard set of input cards.
Dual SD/HD – SDI input card
The Dual SD/HD-SDI input
card accepts both standarddefinition (SD) and highdefinition (HD) serial-digitalinterface (SDI) signals, and
enables the user to connect
two of either types of signal. Both single-link HD and dual-link
HD signals are accepted. This card also has two SD/HD-SDI
outputs to enable “loop-through” for its respective input.
Analog input card
The Analog input card
accepts an analog video
signal input over a 5 BNC
connector interface. It can
accept RGBH&V signals
over 5 connectors, as well
as component YPbPr signals on the RGB inputs.
Dual link
The Dual link DVI input card has a 15-pin VGA connector
for analog signals and a DVI-I connector which can support
a single- or dual-link DVI HDCP video signal. The card can
simultaneously support a digital signal on the DVI input and
an analog signal on the VGA port.
DMX512 interface card
DVI input card
This interface card supports
the DMX512 communication
standard through two 5-pin
XLR connectors.
Video decoder input card
The Video decoder input
card accepts various types of
standard definition (SD) video,
including CVBS (composite
video), S-video, and component.
It accepts NTSC 3.58, NTSC 4.4,
PAL, PAL-N, PAL-M or SECAM formats. This card has two mini-DIN
connectors (for S-video signals) and four BNC connectors that
can be grouped to allow combinations of CVBS, S-Video, YPrPb
or RGB video sources.
Twin HDMITM input card
The Twin HDMI input card
accepts two HDMI inputs
and provides 12-bit deep
color handling on the input.
Additionally, advanced
loop-through allows any
input on any input card to be looped through to the two HDMI
outputs on the card.
LCD keypad
This easy-to-use
LCD keypad includes:
•
Contextual menus provide
a fully-featured, intuitive
interface; removing the
need for a cluttered keypad
•
Large, four line LCD display
• Adjustable brightness and timed LCD off mode
• Intuitive keypad design that lights up when features
are active – making it user friendly
• Active keys are color-coded amber to indicate that selections
will result in changes visible to the audience.
Dual-frequency receiver
The dual-frequency (38 kHz and 455 kHz) receiver ensure the
projector receives signals at increased distances between the
remote and projector, and reduces the affect of interference
from lighting.
Page 8
7 REINFORCE PERFORMANCE
Quiet operation
When your presentation depends on the full attention
of your audience you don’t want them focused on the noise
from your projector. The filter-free design with auto-sensing
fan and temperature sensors automatically adjust for the
quietest operation possible.
Sound is reduced in the various modes, as well, high pitched, annoying frequencies
are minimized.
Roadster models
The M Series Roadster models
have been designed with
stagers in mind. The Christie
Roadster S+10K-M, Christie
Roadster HD10K-M and
Christie Roadster WU12K-M
ship equipped with more
input
cards than the other
M Series models, as well
as a stacking frame.
Accessories
Whatever you need, Christie has a large selection of optional
accessories. Create the projector you need by choosing from
eight lenses, various input cards and much more.
Optional stacking frameOptional ceiling mount
Optional lamp
Optional portrait display adapter
Optional lenses
Optional Christie AutoStack
™
Filters (optional)
If the environment you’re working in requires more than the
protection of our dust sealed engine, choose from one of two
filters (coarse dust and fog juice). Help extend the life of your
projector and protect your investment from dirt, dust, sand
as well as fog, smoke, hazers and pyrotechnics. Each M Series
projector is equipped with two removable side panels that are
designed to hold a filter, if required.
DescriptionPart number
Lens - fixed
Lens - zoom
Lamps*
Input cards
Miscellaneous
accessories
* Lamp power is specific to each model and cannot be interchanged.
Optional coarse dust filterOptional fog juice filter
Lens ILS 0.73:1 SX+/0.67:1 HD118-100110-XX
Lens ILS 1.2:1 SX+ /1.1:1 HD118-100117-XX
Lens ILS 1.25-1.6:1 SX+/1.16-1.49:1 HD118-100111-XX
Lens ILS 1.5-2.0:1 SX+/1.4-1.8:1 HD118-100112-XX
Lens ILS 2.0-2.8:1 SX+/1.8-2.6:1 HD118-100113-XX
Lens ILS 2.8-4.5:1 SX+/2.6-4.1:1 HD118-100114-XX
Lens ILS 4.5-7.5:1 SX+/4.1-6.9:1 HD118-100115-XX
Lens ILS 7.5-11.2:1 SX+/6.9-10.4:1 HD118-100116-XX
Assembly 350W lamp003-100857-XX
Assembly 200W lamp003-100856-XX
Analog input108-309101-XX
Dual link DVI input 108-312101-XX
Video decoder input108-310101-XX
Dual SD/HD-SDI input108-313101-XX
Twin HDMI input108-311101-XX
DMX512 interface108-314101-XX
Coarse dust filter pack M Series118-100104-XX
Fog juice filter pack M Series118-100105-XX
Stacking frame118-100107-XX
Ceiling mount118-100108-XX
Ceiling mount extension104-101001
Portrait display adapter118-116109-XX
ILS lens adapter kit108-331108-XX
Christie AutoStack
™
108-308101-01
Page 9
TECHNICAL SPECIFICATIONS 8
Lens name
0.73:1 SX+/ 1.2:1 SX+/ 1.25-1.6:1 SX+/1.16-1.49:1 HD
0.67:1 HD1.1:1 HD
1.5-2.0:1 SX+/ 1.4-1.8:1 HD2.8- 4.5:1 SX+/ 2.6-4.1:1 HD
optional Analog • Dual-link DVI • Dual SD/HD-SDI • Video Decoder • Twin HDMI
signals HDTV formats VGA through to QXGA (2048 x 1536) • Accepts all current HDTV/DTV formats • Multi-standard video decoder • Horizontal and vertical scaling, all inputs
pixel clock165 MHz
scan rates Horizontal: 15 to 120 kHz • Vertical: 23.97 to 150 Hz
Inputs, control and networking
Optical system
Lenses
fixed0.73:1 SX+/0.67:1 HD* • 1.2:1 SX+/1.1:1 HD
RS232 in/out
Dust sealed, 3-chip DMD light engine
•
RS422 In • Ethernet (10/100) • USB Device • GPIO (RS232 9 Pin male connector) • Built-in backlit LCD keypad • Remote control (with optional wired XLR connection)
•
Motorized horizontal and vertical lens offset • Scheimpflug (tilt) adjustment • Built-in light shutter • Tool-free lens insertion system
zoom1.25-1.6:1 SX+/1.16-1.49:1 HD** • 1.5-2.0:1 SX+/1.4-1.8:1 HD • 2.0-2.8:1 SX+/1.8-2.6:1 HD • 2.8-4.5:1 SX+/2.6-4.1:1 HD • 4.5-7.5:1 SX+/4.1-6.9:1 HD • 7.5-11.2:1 SX+/6.9-10.4:1 HD
4
offsets
Accessories
standardUser manual
optionalCoarse dust filter
Enhanced feature sets
Power
requirements
operating voltage110-240 VAC 50/60Hz
operating current8.7 A @ 100 VAC 13.2 A @ 100 VAC8.7 A @ 100 VAC
Fog juice filter • Ceiling mount • Ceiling mount extension • ILS lens adapter kit • Portrait display adapter • Stacking frame • Christie AutoStack™
LiteLOC™ • Comprehensive Color Adjustment (CCA™) • Embedded Christie Twist™ image warping and edge-blending • Intelligent Lens System (ILS™) for zoom, focus, horizontal and vertical offset for all lenses • Auto setup
•
Digital keystone correction • Dynamic iris • Menus in five languages • 99 channel memories • Multi-windowing and processing (up to a 3 x 3 array) • Motorized yellow notch filter (HD models only) • Black level blending
870W 1320W 870W
4508 BTU/hr 2971 BTU/hr
(LxWxH): 22.1 x 19.7 x 10.2" (561 x 500 x 259mm)
(LxWxH): 29.0 x 27.0 x 24.6" (735 x 685 x 625mm)
weight55lb (25kg) (without lens)
shipping weight80lb (36kg)
Operating environment
Regulatory approvals
Limited warranty
1
US Patents 7,230,768; 6 ,205,271; 6,734,957. 2 Patent p ending. 3 Some feature s may not b e func tional on initial pro duc t shipment s but will be enabled via softwar e upgr ade wh en avai lable. 4 Values are for ref erenc e and should be v alida ted with the Ch ristie len s calc ulator. 5 Not avai lable i n WXGA models
Temperature: 40 to 104° F (5 to 40° C)
UL/CSA/IEC 60,950 (3rd edition) • FCC Class A, CE, CCC • This product conforms to all relevant European directives, standards, safety, health and environmental concerns • RoHS, WEEE
3 years parts and labor (including light engine) • Contact an authorized Christie representative for full details of our limited warranty
•
Humidity: 20-80% non-condensing
Roadster S+10K-MHD6K-MHD10K-MRoads ter HD10K-MW X7K-MWX10K- MWU7K-MWU12K-MRoadster WU12K-M
(6600 center lumens)
(3300 center lumens)
10,000 ANSI lumens (11,000 center lumens) 5700 ANSI lumens
(6270 center lumens)
5000 ANSI lumens (5500 center lumens) 2850 ANSI lumens
(3135 center lumens)
9500 ANSI lumens
(10,450 center lumens)
4750 ANSI lumens
(5225 center lumens)
3-chip 0.85" DMD3-chip 0.96" DMD
HD (1920 x 1080)WXGA (1366 x 768)WUXGA (1920 x 1200)
Dual SD/HD-SDI
•
Video decoder
Analog BNC • Dual-link DVIAnalog BNC • Dual-link DVI •
Dual SD/HD-SDI
•
Video decoder
Dual-link DVIAnalog BNC
(* ±50%V ±18%H) (** ±120%V ±58%H)
•
IR remote • Line cord
User manual • IR remote • Line cordStacking frame • User manual
User manual • IR remote • Line cordStacking frame • User manual
•
IR remote • Line cord
13.2 A @ 100 VAC
1320W
4508 BTU/hr
Side view
DescriptionPart numberDimension ‘A’
Lens ILS 0.73:1 SX+/0.67:1 HD118-100110-XX
Lens ILS 1.2SX+/1.1HD118-100117-XX
Lens ILS 1.25-1.6 SX+/1.16-1.49 HD118-100111-XX
Lens ILS 1.5-2.0 SX+/1.4-1.8 HD118-100112-XX
Lens ILS 2.0-2.8 SX+/1.8-2.6 HD118-100113-XX
Lens ILS 2.8-4.5 SX+/2.6-4.1 HD118-100114-XX
Lens ILS 4.5-7.5 SX+/4.1-6.9 HD118-100115-XX
Lens ILS 7.5-11.2 SX+/6.9-10.4 HD118-100116-XX
215mm (8.49")
279mm (11.01")
238mm (9.37")
205mm (8.07")
169mm (6.68")
155mm (6.14")
141mm (5.51")
199mm (7.86")
Underneath view
Page 12
Corporate offices
Christie Digital Systems USA, Inc
USA – Cypress
ph: 714 236 8610
Christie Digital Systems Canada, Inc.
Canada – Kitchener
ph: 519 744 8005
Independent sales
consultant offices
Spain
ph: +34 91 633 9990
Italy
ph: +39 (0) 2 9902 1161
South Africa
ph: +27 (0) 317 671 347
Worldwide offices
United Kingdom
ph: +44 (0) 118 977 8000
Germany
ph: +49 2161 664540
France
ph: +33 (0) 1 41 21 44 04
Eastern Europe and
Russian Federation
ph: +36 (0) 1 47 48 100
Dubai (United Arab Emirates)
ph: +971 (0) 4 299 7575
India
ph: (080) 41468941 – 48
Singapore
ph: +65 6877 8737
China (Shanghai)
ph: +86 21 6278 7708
China (Beijing)
ph: +86 10 6561 0240
Japan (Tokyo)
ph: 81 3 3599 7481
Korea (Seoul)
ph: +82 2 702 1601
For the most current specification information, please visit www.christiedigital.com
Copyright 2009 Christie Digital Systems USA, Inc. All rights reserved. All brand names and product names are trademarks, registered trademarks
or tradenames of their respective holders. Canadian manufacturing facility is ISO 9001 and 14001 certified. Performance specifications are typical.
Due to constant research, specifications are subject to change without notice. Printed in Canada on recycled paper. 2516 Sep 09
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.