Chordette PEACH Instruction Manual

Thank you for purchasing the Chordette Peach Bluetooth
Decoder with USB, Coax and optical input DAC. In
order to get the most from your product please take a
few moments to read these instructions.

Connections

Balance Control

Audio Outputs

There is one pair of Left & Right unbalanced outputs via RCA phono style connectors.
The right output is indicated by a red band and the left a white band. The outputs are
at 2V line level.

Chordette PEACH

Instruction Manual

High Definition Bluetooth Decoder and DAC

12V DC power input

Coax digital input

Input Selector

Control input for connection
to Prime preamplifier

Bluetooth antenna connection

(screw supplied antenna in place
before use)

USB Input

Optical digital input

Right Output

Left Output

Input Selection

The Chordette Peach enables you to receive and decode Bluetooth
Apt-X or A2DP audio, USB streaming audio, coax or optical digital
audio. These inputs can be selected using the rotary switch on the rear
panel of the unit or remotely via the control cable and Prime preamplifier.
The internal illumination will change accordingly.

Function Position

USB - rotated fully anticlockwise (orange light)
Bluetooth - 2 (blue light)
Coax - 3 (red light)
Optical - 4 (green light)
Prime preamplifier - 5 (no light)
control

Using USB digital audio

Connect your personal computer via an A to B type USB cable. The
Peach will automatically be recognised by the operating system as a
USB DAC. All audio from the computer will now be streamed via the
Peach. (If there is no audio you may need to manually select the USB
connection in the sound settings on the computer).

Using Bluetooth wireless digital audio

Referring to your Bluetooth device instructions, search for new paired
devices. The Peach will be identified as Peach then a number. Select
your Peach and enter the passcode 0000 when prompted. Confirm
that you wish to connect to the Peach device.

The Peach should now be locked to your Bluetooth enabled phone or
computer and be able to receive high quality digital audio. Higher
quality Apt-X transmissions are automatically detected if received.
If you lose connection, for instance if the Peach is switched off, then
you can reconnect by looking at the list of paired devices on the phone
and selecting connect.

Using Coax or Optical digital inputs

Digital source components such as CD players can be connected to
the BNC coax input or optical digital input. Select the correct input
using the rotary switch ( or via the Prime remote control ).

Made in England by Chord Electronics Ltd

www.chordelectronics.co.uk

Now with Apt-X advanced Audio Codec Installed

The Bluetooth name and logos are registered trademarks and are owned by the Bluetooth SIG Inc.