CHOICE FORTUNE SC 65UK700N User Manual

Service Hotline:
Ligne d’assistance téléphonique :
Línea de servicio:

1-888-777-5956

USER MANUAL

MANUEL D’UTILISATION

MANUAL DEL USUARIO

© 2017 All rights reserved.

seiki.com

SEIKI CORPORATION

Printed in China

ULTRA-HD

SMART TV

SC-65UK700N

simply brilliantTM

Read the User Manual carefully before using the TV and keep it for further reference.

Avant d’utiliser le téléviseur, lisez attentivement le manuel d’utilisation et conservez-le pour
consultation future.

Lea el Manual del usuario antes de utilizar el televisor y consérvelo para futuras consultas.

CONTENTS

Important Safety Instructions 2

Safety Information 3

Preparation 4

What's Included 4
Front View 5
Rear View 6
Installing the Base Stand 7
Removing the Stand for Wall-Mounting 7
Remote Control 8

Connecting External Devices 9

Basic Operations 10

Initial Setup
Menu Operation
Picture
Sound 15
Function
Time 18

noitpO 19

LOCK 20
Channel 21

10

12

13

16

Network Setting

Digital Media Palyer

Introduction

Parental Control 31

Troubleshooting 33

Limited Warranty

23

26Internet

30

30

35

36Application Remote control manual

44

En

1

-

IMPORTANT SAFETY INSTRUCTIONS

• Read these instructions – All the safety

and operating instructions should be read
before this product is operated.

• Keep these instructions – The safety and

operating instructions should be retained for
future reference.

• Heed all warnings – All warnings on the

appliance and in the operating instructions
should be adhered to.

• Follow all instructions – All operating and

use instructions should be followed.

• Do not use this apparatus near water

– The appliance should not be used near
water or moisture – for example, in a wet
basement or near a swimming pool, and the
like.

• Clean only with dry cloth.

• Do not block any ventilation openings.

Install in accordance with the manufacturer’s
instructions.

• Do not install near any heat sources such

as radiators, heat registers, stoves, or other
apparatus (including

that produce

heat.

• Do not defeat the safety purpose of the

polarized or grounding-type plug. A polarized
plug has two blades with one wider than
the other. A grounding-type plug has two
blades and a third grounding prong. The
wide blade or the third prong are provided
for your safety. If the provided plug does not

into your outlet, consult an electrician for

replacement of the obsolete outlet.

• Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit
from the apparatus.

• Only use attachments/accessories
by the manufacturer.

• Use only with the cart, stand, tripod, bracket,
or table specified by the manufacturer, or
sold with the apparatus. When a cart is
used, use caution when moving the cart/
apparatus combination to avoid injury from
tip-over.

• Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as the power
or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has
been exposed to rain or moisture, does not operate
normally, or has been dropped.

• Please keep the unit in a well-ventilated environment.

WARNING: To reduce the risk of
do not expose this appa ra tu s to rain or moisture.
The apparatus should not be exposed to dripping or
splashing. Objects filled with liquids, such as vases
should not be placed on apparatus.
WARN IN G: Th e batt eries shal l not be ex posed to
excessive heat such as sunshine,
WARNING: The main s plug is used as disco nnect
dev ice, the dis conne ct de vice shal l remain rea dily
operable.
WARNING: To reduce the risk of electric shock, do not
remove cover (or back) as there are no user-serviceable
parts inside. Refer servicing to

This light ning flash with arrow head sym bol
within an equilateral triangle is intended to

alert the user to the presence of non-insulated
“dangerous voltage” within the product’s enclosure that
may be of sufficient magnitude to constitute a risk of
electric shock.

The exclamation point within an equilateral

tr ian gle i s int end ed to a ler t the u ser t o

th e pre sen ce of impor tan t opera tin g and
maintenance instructions in the literature accompanying
the appliance.

This equipment is a Class II or double insulated
electrical appliance. It has been designed in such
a way that it does not require a safety connection
to electrical earth.

supply cord

or electric shock,

or the like.

personnel.

• Unplug this apparatus during light ning
storms or when unused for long periods of
time.

En

-

2

SAFETY INFORMATION

To ensure reliable and safe operation of this equipment, please carefully read all the instructions in this
user guide, especially the safety information below.

Electrical Safety

• The TV set should only be connected to a main power supply with voltage that matches the label at the
rear of the product.

• To prevent overload, do not share the same power supply socket with too many other electronic
components.

• Do not place any connecting wires where they may be stepped on or tripped over.

• Do not place heavy items on any connecting wire, which may damage the wire.

• Hold the main plug, not the wires, when removing from a socket.

• During a thunderstorm or when not in using the television for long periods, turn off the power switch on
the back of the television.

• Do not allow water or moisture to enter the TV or power adapter. Do NOT use in wet, moist areas, such
as bathrooms, steamy kitchens or near swimming pools.

• Pull the plug out immediately, and seek professional help if the main plug or cable
is spilled onto the set, if the TV set accidentally exposed to water or moisture, if anything accidentally
penetrates the ventilation slots or if the TV set does not work normally.

• Do not remove the safety covers. There are no user serviceable parts inside. Trying to service the unit

this apparatus.

• To avoid a battery leakage, remove batteries from the remote control, when the remote is not use for long
period, or when the batteries are exhausted.

•

• For best results, use type AAA (example-alkaline, carbon-zinc, etc.) batteries.

• Install only new batteries of the same type in your product.

• Failure to insert batteries in the correct polarity, as indicated in the battery compartment, may shorten the
life of the batteries or cause batteries to leak.

• Do not mix old and new batteries.

• Do not mix Alkaline, Standard (Carbon-Zinc) or Rechargeable (Nickel Cadmium) or (Nickel Metal
Hydride) batteries.

• Batteries should be recycled or disposed of as per state and local guidelines.

• Do not attempt to recharge disposable batteries.

• Do not short circuit battery terminals.

• Keep away from children.

Physical Safety

• Do not block ventilation slots in the back cover. You may place the TV in a cabinet, but ensure at least
5cm (2’’) clearance all around.

• Do not tap or shake the TV screen, or you may damage the internal circuits
remote control.

•

• Do not install near any heat sources such as radiators, heat registers, stoves or other apparatus (including

• Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two
blades with one wider than the other. A grounding plug has two blades and a third grounding prong, the

consult an electrician for replacement of the obsolete outlet.

• Protect the power cord from being walked on or pinched particularly at plugs.

• Unplug the apparatus during lightning storms or when unused for long periods.

•
normally or if the apparatus, including the power supply cord or pulg, has been damaged in any way.

• Servicing is also required if liquid has been spilled, or objects have fallen into the apparatus; when the
apparatus has been exposed to rain or moisture; or if the apparatus has been dropped.

• Always connect your television to a power outlet with protective ground connection.

•

• The ventilation should not be impeded by covering the ventilation openings with items, such as
newspapers, table-cloths, curtains, etc.

•

• The use of apparatus in moderate climates.

is damaged, liquid

. Take good care of the

s required if the apparatus does not operate

ation.

d on the apparatus.

En

3

-

PREPARATION

What's Included

Q.MENU

ENTER

Back Exit

VOL CH

Mute

CC

P.Mode

TTS

List

S.Mode

Input

Menu

MTS/
Audio

Sleep

INFO

TV Set

Remote Control with Batteries(2*AAA)

TV Stand Four Screws(M4x14mm)

User Manual

User Manual

Quick

Start Guide

Quick Start Guide

En

4

-

Front View

PREPARATION

1.

POWER

Switch the TV between On / Standby mode.

2.

IR (Infrared Receiver)

Receive IR signals from the remote control.

3.

POWER Indicator

Illuminate red when the TV is in standby mode.

En

5

-

PREPARATION

Rear View

1. Power Cord

Connect to AC power outlet.

2. Headphone Output Socket

Connect to the Headphones.

3. OPTICAL Output

Connect a digital sound system to this
jack.

4.

LAN

Network connection port.

5.

HDMI Inputs

Connect to a

input device.

Note:HDMI1 with ARC function.This item
is used to turn on/off Audio Return Channel.
When ARC is on,the TV can return the audio
to connected HDMI device.(Amplifier,etc)

En

-

6

(HD) signal

DTV/TV Input

6.

Connect to the antenna (75Ω VHF/UHF)

socket with the RF coaxial cable.

7.

USB Port

Update
and video files.

8.

COMPOSITE/COMPONENT IN

Connect to AV devices with composite/
co mpon ent (Y/Pb/Pr) video input

sockets. COMPOSITE VIDEO and
COMPONENT(Y/PB/PR) share with AUDIO
IN (L/R).

AUDIO Input

9.

Connect to the AUDIO(L/R) o utput

sockets on external audio device.

also play photo files

Installing the Base Stand

• 1. Lay the TV face-down on a flat,

cushioned surface to avoid damaging
or scratching.

• 2.Fix the left base stand to the TV

using the 2 pcs provided screws

• 3.Fix the right base stand assembly
to the TV using the 2 pcs provided
screws

Removing the Stand for Wall-Mounting

• 1.Lay the TV face-down on a flat,

cushioned surface to avoid damaging
or scratching.

• 2.Untighten the 4 pcs screws holding
the stand assembly and remove them.

• 3.Attach the wall-mount bracket to
the TV using the mounting holes on
the back of the TV. Mount this TV
according to the instructions included
in the wall-mount bracket.

PREPARATION

(M4x14mm) .

(M4x14mm) .

WARNING: This apparatus is intended to be supported by UL Listed wall mount bracket.

Wall Moun ting

The TV is provided with mounting holes for a VESA approved wall mounting bracket (Not Supplied).
Remove the screws holding the base to the base bracket and lift the base away (do not remove the base
mounting brackets). Mount the VESA bracket using 4*M6 isometric threaded screws (Not Supplied).

Never place a television set in an unstable location. A television set may fall, causing serious personal
injury or death. Many injuries, particularly to children, can be avoided by taking simple precautions such
as:

-Using cabinets or stands recommended by the manufacturer of the television set.

-Only using furniture that can safely support the television set.

-Ensuring the television set is not overhanging the edge of the supporting furniture.

-Not placing the television set on tall furniture(for example, cupboards or bookcases) without anchoring
both the furniture and the television set to a suitable support.

-Not placing the television set on cloth or other materials that may be located between the television set
and supporting furniture.

-Educating children about the dangers of climbing on furniture to reach the television set or its controls.
If your existing television set is being retained and relocated, the same considerations as above should
be applied.

Your new TV is heavy, please consult with professional wall mount installer to perform this installation.

WARNING

En

7

-

PREPARATION

11

13
17

15

19

20

23

24

26

Remote Control

1

3

6
7

9

Input

Q.MENU

ENTER

Back Exit

VOL CH

Mute

P.Mode

S.Mode

MTS/

Audio

Sleep

INFO

CC

TTS

List

Menu

2

10

12

14

16

18

21

22

25

28
27

1. : Turn the TV on and off.POWER

2. : This button is used to switch among Input
different sources, Select a source and press

ENTER button to confirm.

3. : Directly select channel Digital Buttons(0-9, -)
with digital buttons.

4. Switch to the previous program.:

5. : If network connects, press this key YouTube
to view YouTube directly.

6.
application.

7.

4

8. : If network connects, press this key NETFLIX

5

to view NETFLIX directly.

8

9. : Press this key to go to quick menu. Q.MENU

: Press this button to select pandorapandora

: Press this button to select VUDUVUDU application.

10. Menu: Display the main menu or exit the

current menu.

11.

: Validation key.ENTER

12. : Use to select Arrow buttons 

on-screen menu items and change menu values.

13. Return. Back:

14. : Exit the menu. E

xit

.

15

16.

: Press these buttons to adjust the VOL -+/

volume.

: CH / Press these buttons to change

channel upward or downward.

17.

18.

Press it to go to App home page.HOME:

: Press this button to cut off the sound of MUTE

the TV set temporarily, press again to resume.

Digital Media Player control

19.

20.

21.

:button Include play/pause, stop,

backward, forward is used in USB mode .

Please refer to relevnat instructions in
the section of multimed player.

: Press this buttonto adjust CC modeCC .

: In USB mode, pre
button to switch audio track when movie
is playing. In TV mode, press this button

to switch MTS or Audio Language.

22.

23.

TS ree this but on to adjust TT n

: P t S oT

24.

P.Mode：Press this button for picture
settings(Vivid,Standard,Movie,Eco Save,User).
Sleep:Press this button to set the sleep timer.

25.

: Press it to show channel list and favorite List

26.

It's used as Color buttons:

or Program Edit menu.

list on screen.

S.Mode：Press this button for sound settings

27.
(Standard,Music,Movie,Sports,User).

: Display the program information

INFO .

28.

ss t

his MTS Audio/

or off .

En

8

-

CONNECTING EXTERNAL DEVICES

AV Cable

(not included)

Game Console

VCR

Audio Cable
(not included)

Blu-ray Player / Recorder

Video Camera

Satellite Receiver

HDMI Device

HDMI Cable

(not included)

Optical Cabl
(not included)

Satellite

MINI AUDIO Cable
(included)

MINI YPBPR Cable
(included)

RF Cable

(not included)

OR

YPBPR Cable
(not included)

Headphone

Digital Audio System

En

9

-

Basic Operations

Initial Setup

• Connect the power cord to the power socket after you have completed all the
physical connections. At this stage, the TV will enter Standby Mode and the red
LED indicator will illuminate.

• In Standby Mode, press the
turn the TV on. The red LED indicator will turn off.

• The first time you turn the TV on, it will go into the Setup Wizard. Press

buttons to select your desired mode and press ENTER to

button on the main unit or on the remote control to

OSD language

Config Menu language.

ENTER

Confirm

Clock

Select to set the clock.

ENTER

Confirm

Time Zone

Select the time zone.

English

Español

French

Auto

Manual

Pacific

Atlantic

Eastern

BACK

Retum

Country

Select the country.

US

Mexico

Canada

Confirm

ENTER

Home or Store

Select where you will use the TV.

ENTER

Confirm

DST

Select Daylight saving time.

BACK

Home

Store

BACK

Off

On

Retum

Retum

En

-

10

ENTER

Confirm

Retum

BACK

5

ENTER

Confirm

BACK

Retum

6

Connection Devices

Select to connect the device.

Connect to the internet

Select the channel input

Scan Channels

Initial Setup

ENTER

Confirm

BACK

Retum

7

Home Mode :
Retail Mode :

At times this mode may use more energy to operate the Volume/Sound Mode
and Picture Mode.

• The SLEEP-MODE Power should be less than 0.5 W.

The picture mode will be Standard if you select this mode.
Select Dynamic Mode if you would like your picture to be brighter.

En

-

11

Menu Operation

Menu Operation

1

Input Setup

Press INPUT key on the remote control to enter "INPUT SOURCE" menu. There are
these options for you to select: "TV", "AV", "Component", "HDMI1", “HDMI2", “HDMI3".
Use /key to select a input source and press ENTER key to confirm.

Input Source

TV HDMI 2 HDMI 3AV Component HDMI 1

Input Source

2 Channels Selection

There are four ways to select channel:

1) Using number keys, and ENTER keys on the remote control
to select channel directly.

To select channel 90, press .

When you use the number buttons, you can directly select channels that were either erased

or not memorized.

2) Using CH / key on the remote control or on your TV to select channel.

When you press the CH / key, the TV changes channels in sequence. You will see all

the channels that the TV has memorized.
You will not see channels that were either erased or not memorized.

3) Press key to return to previous channel, press it again to return to
current channel.

To quickly switch between two channels that are far apart, tune to one channel, then use the
number keys to select the second channel. Then use the
between them.

is not activated if no channel has been changed after TV turning on.

4) Select channels from "Channels List" or "Favorite List".
Press LIST key to choose from "Channel List" menu.

9

ENTER

0

button to quickly

alternate

3 Volume Adjustment and Mute Setup

Volume adjustment

Press VOL / key on the remote control or the TV to display "Volume" menu,
adjust the volume of TV between 0 to 100 by using VOL / key:

En

-

12

Menu Operation

 To increase the volume, press VOL key;
 To decrease the volume, press VOL key;

Mute

Press “MUTE” and the sound cuts off. The MUTE icon will appear in the lower-right
corner of the screen.
To resume sound, press the “MUTE” button again, or simply press the key.

4

Current Channel Information

Press “INFO” key on the remote control to view current
channel information, the indications of channel
information are listed in the following table.

14.1

Press “EXIT” key on the remote control to exit this OSD.

ATSC-1

Moving picture 480i 4:3480i

08:30 09:30

Mute

VOL

01/ 012005 08:

40

Picture

1. Press MENU key to display the main menu on the screen.

2. Press / key to select "Picture" option.

3. Press  key to enter "Picture" submenu.

4. You can also press the PICTURE key on the
remote control to select one of the picture settings.

Picture Mode

Your TV has four picture settings (Vivid, Standard,Movie,Eco Save,
User) that are preset at the factory. Only "User" mode can be
set to your preference by adjusting particular items such as
Contrast, Brightness, Color, Sharpness.

1. Press / key to select "Picture Mode" option.

2. Press “” or "ENTER" key to confirm.

3. Press / key to select one picture mode.

Picture

Sound

Function

Time

Option

Lock

Channel

En

-

13