CHOICE FORTUNE SC 60UK850N User Manual
ULTRA-HD
SC-60UK850N
CONTENTS
Important Safety Instructions 2
Safety Information 3
Preparation 4
What's Included 4
Front View 5
Rear View 6
Installing the Base Stand 7
Removing the Stand for Wall-Mounting 7
Remote Control 8
Connecting External Devices 9
Basic Operations 10
Initial Setup
Menu Operation
Picture
Sound 15
Function
Time 18
noitpO 19
LOCK 20
Channel 21
10
12
13
16
Network Setting
Digital Media Palyer
Introduction
Parental Control 31
Troubleshooting 33
23
26Internet
30
30
35
36Application Remote control manual
En
1
-
IMPORTANT SAFETY INSTRUCTIONS
• Read these instructions – All the safety
and operating instructions should be read
before this product is operated.
• Keep these instructions – The safety and
operating instructions should be retained for
future reference.
• Heed all warnings – All warnings on the
appliance and in the operating instructions
should be adhered to.
• Follow all instructions – All operating and
use instructions should be followed.
• Do not use this apparatus near water
– The appliance should not be used near
water or moisture – for example, in a wet
basement or near a swimming pool, and the
like.
• Clean only with dry cloth.
• Do not block any ventilation openings.
Install in accordance with the manufacturer’s
instructions.
• Do not install near any heat sources such
as radiators, heat registers, stoves, or other
apparatus (including
that produce
heat.
• Do not defeat the safety purpose of the
polarized or grounding-type plug. A polarized
plug has two blades with one wider than
the other. A grounding-type plug has two
blades and a third grounding prong. The
wide blade or the third prong are provided
for your safety. If the provided plug does not
into your outlet, consult an electrician for
replacement of the obsolete outlet.
• Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit
from the apparatus.
• Only use attachments/accessories
by the manufacturer.
• Use only with the cart, stand, tripod, bracket,
or table specified by the manufacturer, or
sold with the apparatus. When a cart is
used, use caution when moving the cart/
apparatus combination to avoid injury from
tip-over.
• Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as the power
or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has
been exposed to rain or moisture, does not operate
normally, or has been dropped.
• Please keep the unit in a well-ventilated environment.
WARNING: To reduce the risk of
do not expose this apparatus to rain or mo istur e.
The apparatus should not be exposed to dripping or
splashing. Objects filled with liquids, such as vases
should not be placed on apparatus.
WARN ING: The batteries shall not be ex posed to
excessive heat such as sunshine,
WARNING : The mains plug is used as disco nnect
dev ice, the disconnect devic e shall remai n readily
operable.
WARNING: To reduce the risk of electric shock, do not
remove cover (or back) as there are no user-serviceable
parts inside. Refer servicing to
This lightning flash with arrowhead sym bol
within an equilateral triangle is intended to
alert the user to the presence of non-insulated
“dangerous voltage” within the product’s enclosure that
may be of sufficient magnitude to constitute a risk of
electric shock.
The exclamation point within an equilateral
tr ian gle i s int end ed to a ler t the u ser t o
th e pr es enc e of impor tant oper at ing and
maintenance instructions in the literature accompanying
the appliance.
This equipment is a Class II or double insulated
electrical appliance. It has been designed in such
a way that it does not require a safety connection
to electrical earth.
supply cord
or electric shock,
or the like.
personnel.
• Unplug this apparatus during ligh tn in g
storms or when unused for long periods of
time.
En
-
2
SAFETY INFORMATION
To ensure reliable and safe operation of this equipment, please carefully read all the instructions in this
user guide, especially the safety information below.
Electrical Safety
• The TV set should only be connected to a main power supply with voltage that matches the label at the
rear of the product.
• To prevent overload, do not share the same power supply socket with too many other electronic
components.
• Do not place any connecting wires where they may be stepped on or tripped over.
• Do not place heavy items on any connecting wire, which may damage the wire.
• Hold the main plug, not the wires, when removing from a socket.
• During a thunderstorm or when not in using the television for long periods, turn off the power switch on
the back of the television.
• Do not allow water or moisture to enter the TV or power adapter. Do NOT use in wet, moist areas, such
as bathrooms, steamy kitchens or near swimming pools.
• Pull the plug out immediately, and seek professional help if the main plug or cable
is spilled onto the set, if the TV set accidentally exposed to water or moisture, if anything accidentally
penetrates the ventilation slots or if the TV set does not work normally.
• Do not remove the safety covers. There are no user serviceable parts inside. Trying to service the unit
this apparatus.
• To avoid a battery leakage, remove batteries from the remote control, when the remote is not use for long
period, or when the batteries are exhausted.
•
• For best results, use type AAA (example-alkaline, carbon-zinc, etc.) batteries.
• Install only new batteries of the same type in your product.
• Failure to insert batteries in the correct polarity, as indicated in the battery compartment, may shorten the
life of the batteries or cause batteries to leak.
• Do not mix old and new batteries.
• Do not mix Alkaline, Standard (Carbon-Zinc) or Rechargeable (Nickel Cadmium) or (Nickel Metal
Hydride) batteries.
• Batteries should be recycled or disposed of as per state and local guidelines.
• Do not attempt to recharge disposable batteries.
• Do not short circuit battery terminals.
• Keep away from children.
Physical Safety
• Do not block ventilation slots in the back cover. You may place the TV in a cabinet, but ensure at least
5cm (2’’) clearance all around.
• Do not tap or shake the TV screen, or you may damage the internal circuits
remote control.
•
• Do not install near any heat sources such as radiators, heat registers, stoves or other apparatus (including
• Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two
blades with one wider than the other. A grounding plug has two blades and a third grounding prong, the
consult an electrician for replacement of the obsolete outlet.
• Protect the power cord from being walked on or pinched particularly at plugs.
• Unplug the apparatus during lightning storms or when unused for long periods.
•
normally or if the apparatus, including the power supply cord or pulg, has been damaged in any way.
• Servicing is also required if liquid has been spilled, or objects have fallen into the apparatus; when the
apparatus has been exposed to rain or moisture; or if the apparatus has been dropped.
• Always connect your television to a power outlet with protective ground connection.
•
• The ventilation should not be impeded by covering the ventilation openings with items, such as
newspapers, table-cloths, curtains, etc.
•
• The use of apparatus in moderate climates.
is damaged, liquid
. Take good care of the
s required if the apparatus does not operate
ation.
d on the apparatus.
En
3
-
PREPARATION
What's Included
Q.MENU
ENTER
Back Exit
VOL CH
Mute
CC
P.Mode
TTS
List
S.Mode
Input
Menu
MTS/
Audio
Sleep
INFO
TV Set
Remote Control with Batteries(2*AAA)
TV Stand Four Screws(M4x14mm)
User Manual
User Manual
Quick
Start Guide
Quick Start Guide
En
4
-
Front View
PREPARATION
ECRUOS
MENU
CH+
CH-
VOL+
VOL-
1. SOURCE
Press to select among different input signal sources.
2. MENU
Display the OSD (on screen display) menu.
3. CH+/-
Press to select a channel.
4. VOL+/-
Press to adjust the volume.
5. POWER
Switch the TV between On / Standby mode.
6. IR (Infrared Receiver)
Receive IR signals from the remote control.
7. POWER Indicator
Illuminate red when the TV is in standby mode.
En
5
-
PREPARATION
Rear View
1. Power Cord
Connect to AC power outlet.
2. Headphone Output Socket
Connect to the Headphones.
3. OPTICAL Output
Connect a digital sound system to this
jack.
4.
LAN
Network connection port.
5.
HDMI Inputs
Connect to a
input device.
Note:HDMI1 with ARC function.This item
is used to turn on/off Audio Return Channel.
When ARC is on,the TV can return the audio
to connected HDMI device.(Amplifier,etc)
En
-
6
(HD) signal
DTV/TV Input
6.
Connect to the antenna (75Ω VHF/UHF)
socket with the RF coaxial cable.
7.
USB Port
Update
and video files.
8.
COMPOSITE/COMPONENT IN
Connect to AV devices with composite/
co mpo nent (Y/Pb/Pr) video input
sockets. COMPOSITE VIDEO and
COMPONENT(Y/PB/PR) share with AUDIO
IN (L/R).
AUDIO Input
9.
Connect to the AUDIO(L/R) o utput
sockets on external audio device.
also play photo files
Installing the Base Stand
• 1. Lay the TV face-down on a flat,
cushioned surface to avoid damaging
or scratching.
• 2.Fix the left base stand to the TV
using the 2 pcs provided screws
• 3.Fix the right base stand assembly
to the TV using the 2 pcs provided
screws
Removing the Stand for Wall-Mounting
• 1.Lay the TV face-down on a flat,
cushioned surface to avoid damaging
or scratching.
• 2.Untighten the 4 pcs screws holding
the stand assembly and remove them.
• 3.Attach the wall-mount bracket to
the TV using the mounting holes on
the back of the TV. Mount this TV
according to the instructions included
in the wall-mount bracket.
PREPARATION
(M4x14mm)
(M4x14mm).
WARNING: This apparatus is intended to be supported by UL Listed wall mount bracket.
En
7
-
PREPARATION
11
13
17
15
19
20
23
24
26
Remote Control
1. : Turn the TV on and off.POWER
2. : This button is used to switch among Input
different sources, Select a source and press
ENTER button to confirm.
1
Input
2
3. : Directly select channel Digital Buttons(0-9, -)
with digital buttons.
4. Switch to the previous program.:
5. : If network connects, press this key YouTube
3
6
7
9
Q.MENU
Menu
10
to view YouTube directly.
6.
application.
7
4
5
8
.
8. : If network connects, press this key NETFLIX
to view NETFLIX directly.
9. : Press this key to go to quick menu. Q.MENU
: Press this button to select pandorapandora
: Press this button to select VUDUVUDU application.
10. Menu: Display the main menu or exit the
current menu.
11. : Validation key.ENTER
ENTER
12
12. : Use to select Arrow buttons
on-screen menu items and change menu values.
13. Return. Back:
14. : Exit the menu. E
Back Exit
VOL CH
Mute
14
16
18
xit
15.
16.
: Press these buttons to adjust the VOL -+/
volume.
: CH / Press these buttons to change
channel upward or downward.
17.
18.
Press it to go to App home page.HOME:
: Press this button to cut off the sound of MUTE
the TV set temporarily, press again to resume.
TTS
List
CC
MTS/
Audio
21
22
P.Mode
S.Mode
Sleep
INFO
25
28
27
Digital Media Player control
19.
20.
21.
:button Include play/pause, stop,
backward, forward is used in USB mode .
Please refer to relevnat instructions in
the section of multimed player.
: Press this button to adjust CC modeCC .
TS Audio/
: In USB mode, pre
ss this M
button to switch audio track when movie
is playing. In TV mode, press this button
to switch MTS or Audio Language.
used as Color buttons:
22.
23.
TS ree this but on to adjust TT n
: P t S oT
24.
P.Mode：Press this button for picture
settings(Vivid,Standard,Movie,Eco Save,User).
Sleep:Press this button to set the sleep timer.
25.
26.
: Press it to show channel list and favorite List
It's
or Program Edit menu.
or off .
list on screen.
27.
S.Mode：Press this button for sound settings
(Standard,Music,Movie,Sports,User).
28.
: Display the program information
INFO .
En
8
-
CONNECTING EXTERNAL DEVICES
CONNECTING EXTERNAL DEVICES
CONNECTING EXTERNAL DEVICES
CONNECTING EXTERNAL DEVICES
AV Cable
(not included)
Game Console
VCR
Audio Cable
(not included)
Blu-ray Player / Recorder
Video Camera
Satellite Receiver
HDMI Device
HDMI Cable
(not included)
Optical Cabl
(not included)
Satellite
MINI AUDIO Cable
(included)
MINI YPBPR Cable
(included)
RF Cable
(not included)
OR
YPBPR Cable
(not included)
Headphone
Digital Audio System
En
9
-
Basic Operations
Initial Setup
• Connect the power cord to the power socket after you have completed all the
physical connections. At this stage, the TV will enter Standby Mode and the red
LED indicator will illuminate.
• In Standby Mode, press the
turn the TV on. The red LED indicator will turn off.
• The first time you turn the TV on, it will go into the Setup Wizard. Press
buttons to select your desired mode and press ENTER
button on the main unit or on the remote control to
OSD language
Config Menu language.
English
Español
Francias
ENTER ENTER
Confirm
Country
Select the country.
Confirm
US
Mexico
Canada
BACK
Retum
En
-
10
[ ] ACCEPT AUTOMATIC UPDATES [ ] DECLINE ALL
Initial Setup
Time Zone
Select the time zone.
ENTER
Confirm
Clock
Select to set the clock.
Manual
ENTER
Confirm
Connection Devices
Select to connect the device.
Connect to the internet
Select the channel input
Scan Channels
Pacific
Atlantic
Eastern
5
Auto
7
BACK
Retum
Home or Store
Select where you will use the TV.
Home
Store
ENTER
Confirm
BACK
6
DST
Select Daylight saving time.
Off
On
ENTER
Confirm
BACK
8
Retum
Retum
ENTER
Confirm
BACK
Retum
9
Home Mode :
Retail Mode :
At times this mode may use more energy to operate the Volume/Sound Mode
and Picture Mode.
• The SLEEP-MODE Power should be less than 0.5 W.
The picture mode will be Standard if you select this mode.
Select Dynamic Mode if you would like your picture to be brighter.
En
-
11
Basic Operations
Menu Operation
1
Input Setup
Press INPUT key on the remote control to enter "INPUT SOURCE" menu. There are
these options for you to select: "TV", "AV", "Component", "HDMI1", “HDMI2",
“HDMI3",“USB".
Use /key to select a input source and press ENTER key to confirm.
Input Source
TV HDMI 2 HDMI 3 USBAV Component HDMI 1
2
Channels Selection
There are four ways to select channel:
1) Using number keys, and ENTER keys on the remote control
to select channel directly.
To select channel 90, press .
When you use the number buttons, you can directly select channels that were either erased
or not memorized.
2) Using CH / key on the remote control or on your TV to select channel.
When you press the CH / key, the TV changes channels in sequence. You will see all
the channels that the TV has memorized.
You will not see channels that were either erased or not memorized.
3) Press key to return to previous channel, press it again to return to
current channel.
To quickly switch between two channels that are far apart, tune to one channel, then use the
number keys to select the second channel. Then use the
between them.
is not activated if no channel has been changed after TV turning on.
4) Select channels from "Channels List" or "Favorite List".
Press LIST key to choose from "Channel List" menu.
9
ENTER
0
button to quickly
Input Source
Input Source
alternate
3 Volume Adjustment and Mute Setup
Volume adjustment
Press VOL / key on the remote control or the TV to display "Volume" menu,
adjust the volume of TV between 0 to 100 by using VOL / key:
En
-
12
Menu Operation
To increase the volume, press VOL key;
To decrease the volume, press VOL key;
Mute
Press “MUTE” and the sound cuts off. The MUTE icon will appear in the lower-right
corner of the screen.
To resume sound, press the “MUTE” button again, or simply press the key.
4
Current Channel Information
Press “INFO” key on the remote control to view current
channel information, the indications of channel
information are listed in the following table.
14.1
Press “EXIT” key on the remote control to exit this OSD.
ATSC-1
Moving picture 480i 4:3480i
08:30 09:30
Mute
VOL
01/ 012005 08:
40
Picture
1. Press MENU key to display the main menu on the screen.
2. Press / key to select "Picture" option.
3. Press key to enter "Picture" submenu.
4. You can also press the PICTURE key on the
remote control to select one of the picture settings.
Picture Mode
Your TV has four picture settings (Vivid, Standard,Movie,Eco Save,
User) that are preset at the factory. Only "User" mode can be
set to your preference by adjusting particular items such as
Contrast, Brightness, Color, Sharpness.
1. Press / key to select "Picture Mode" option.
2. Press “” or "ENTER" key to confirm.
3. Press / key to select one picture mode.
Picture
Sound
Function
Time
Option
Lock
Channel
En
-
13
Loading...